Hydrophobicity of biofilm coatings influences the transport dynamics of polystyrene nanoparticles in biofilm-coated sand

A novel and simple method for measuring nano/microplastic concentrations in soil using UV-Vis spectroscopy with optimal wavelength selection

A simple method for measuring the concentration of nano/microplastics (N/MPs) in soil, which is difficult owing to the size of the filter mesh and the resolution of the measuring instrument, was investigated. A spectrophotometer was used for the measurements and polystyrene particles were used as the N/MP samples. When measuring N/MP concentrations in soil suspensions, absorbance was measured at two wavelengths, and the best combination of wavelengths for measurement was extracted because soil particles and leached components interfere with N/MP absorbance. A wavelength combination of 220-260 nm and 280-340 nm was found to be suitable for a variety of soils. As N/MPs are adsorbed on the surface of soil particles and precipitate with soil particles in suspension, a calibration curve was created between the concentration of N/MPs in the soil suspension and the N/MP content in the soil. The calibration curve showed a linear relationship, allowing for the estimation of the concentration of N/MPs in the soil. Although other N/MP materials, such as polyethylene and polyethylene terephthalate, must also still be considered and tested, this simple method has the potential to measure N/MPs in various types of soil.

Effect and environmental behaviour of microplastics in soil

Soil microplastic pollution is currently a worldwide concern. Microplastics are organic pollutants that are abundant in the natural environment, are persistent and difficult to degrade and may endanger human health while harming the environment. This article offers a bibliometric analysis of the environmental behaviour of microplastics in soils, as well as a thorough statistical analysis of research goals and trends in this field. We conducted a thorough search of all relevant literature from 2012 to 2022 in the Web of Science core database. The data analysis shows that, starting in 2012, there has been an upward trend in the number of articles about soil microplastic pollution. It can also be seen that China is relatively ahead of the curve in this area of research, followed by the United Kingdom and the United States. This article also systematically describes the research hotspots in this field. The results show that the current research on soil microplastics is mainly focused on their identification, enrichment and toxicity, whereas studies on the migration and transformation of soil microplastics and the mechanism of interaction with other pollutants are still lacking. Our results provide ideas and prospects for future research in this field.

Microplastics/nanoplastics in porous media: Key factors controlling their transport and retention behaviors

Till now, microplastics/nano-plastics(M/NPs) have received a lot of attention as emerging contaminant. As a typical but complex porous medium, soil is not only a large reservoir of M/NPs but also a gateway for M/NPs to enter groundwater. Therefore, the review of the factors controlling the transport behavior of M/NPs in porous media can provide important guidance for the risk assessment of M/NPs in soil and groundwater. In this study, the key factors controlling the transport behavior of M/NPs in porous media are systematically divided into three groups: (1) nature of M/NPs affecting M/NPs transport in porous media, (2) nature of flow affecting M/NPs transport in porous media, (3) nature of porous media affecting M/NPs transport. In each group, the specific control factors for M/NPs transport in porous media are discussed in detail. In addition to the above factors, some substances (colloids or pollutants) present in natural porous media (such as soil or sediments) will co-transport with M/NPs and affect its mobility. According to the different properties of co-transported substances, the mechanism of promoting or inhibiting the migration behavior of M/NPs in porous media was discussed. Finally, the limitations and future research directions of M/NPs transport in porous media are pointed out. This review can provide a useful reference for predicting the transport of M/NPs in natural porous media.

Mechanisms of increased small nanoplastic particle retention in water-saturated sand media with montmorillonite and diatomite: Particle sizes, water components, and modelling

The processes by which small nanoplastics (NPs) accumulate in soil are unclear. To clarify the different deposition processes that affect small NPs (< 30 nm) compared to larger NPs in the soil environment, due to their interaction with clays as major soil components, the transport behavior of two-sized NPs (20 and 80 nm) with two clays (diatomite (Diat) and montmorillonite (Mont)) in NaCl and CaCl2 solutions were investigated in water-saturated quartz sand columns. The experimental results showed that more 20 nm NPs could enter the lattice structure of Diat than Mont in NaCl solution. This contributed to the stronger deposition of 20 nm NPs by Diat on sand, which was associated with a lower k1d/k1 value (obtained from two-site kinetic attachment model). In contrast, 80 nm NPs had a stronger reversible retention than 20 nm NPs with Mont, even though both sizes of NPs-Mont displayed a similar transportability. In CaCl2 solution, the larger NPs-Mont hetero-aggregates formed with a stronger suppressed depth of φmax based on Derjaguin-Landau-Verwey-Overbeek theory. Thus, Mont had a stronger transport inhibition than Diat for both NPs sizes, with a lower k1d/k1. These findings could benefit in predicting the size-based deposition of NPs in a heterogenous soil environment.

Combined effects of bacteria and antibiotics on surface properties and transport of nanoplastics in porous media

Currently, research on the individual effects of bacteria and antibiotics on the transport of nanoplastics (NPs) in porous media is in its infancy, while research on their combined effect is absent. It is well known that bacteria and antibiotics also interact with each other, so this synergistic transport of bacteria, antibiotics, and NPs in porous media must be very interesting. For exploring this aspect, we investigated the individual and combined effects of bacteria and antibiotics on the transport of polystyrene NPs (PS-NPs) in saturated porous media. Hydrophobicity, roughness, and the Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction energy were measured and calculated. The PS-NPs' transport in porous media was fitted using a mathematical model. Enhanced roughness and size of PS-NPs with increased bacterial concentration dominated and inhibited the PS-NPs' transport in porous media, although the hydrophilicity of PS-NPs and the energy barrier between PS-NPs and porous media were also increased. An increase in antibiotic concentration reduced the energy barrier between PS-NPs and porous media, thereby decreasing the PS-NPs' transport. Combined effects of bacteria and antibiotics on the PS-NPs' transport were complex and distinct from individual effects, but the mechanisms were clear. Roughness and hydrophilicity of PS-NPs and the DLVO interaction energy between PS-NPs and porous media together influenced this process. In the presence of bacteria, antibiotics could alter the bacterial surface roughness by altering bacterial extracellular polymeric substances, and thus alter the PS-NPs' surface roughness, thereby affecting the PS-NPs' transport in porous media. When antibiotics were present, enhanced bacterial concentration increased the PS-NPs' hydrophilicity and the energy barrier between PS-NPs and porous media, thus promoting the PS-NPs' transport. The findings of this study provided a theoretical basis for clarifying the transport of NPs in porous media under complex environments, facilitating a reduction in environmental pollution of NPs.

The co-presence of polystyrene nanoplastics and ofloxacin demonstrates combined effects on the structure, assembly, and metabolic activities of marine microbial community

Nanoplastic is increasing in environments and can address toxic effects on various organisms. Particle size, concentration, and surface functionalization most influence nanoplastic toxicity. Besides, nanoplastic can adsorb other contaminants (e.g., antibiotics) to aggravate its adverse effects. The combined effects of nanoplastics and antibiotics on planktonic/benthic microbial communities, however, are still largely unknown. In this study, the combined effects of polystyrene nanoplastic and ofloxacin on the structure, assembly, and metabolic activities of marine microbial communities were investigated based on amplicon sequencing data. The results mainly demonstrate that: (1) nanoplastic and ofloxacin have greater impacts on prokaryotic communities than eukaryotic ones; (2) niche breadths of planktonic prokaryotes and benthic eukaryotes were shrank with both high nanoplastic and ofloxacin concentrations; (3) increased ofloxacin mainly reduces nodes/edges of co-occurrence networks, while nanoplastic centralizes network modularity; (4) increased nanoplastic under high ofloxacin concentration induces more differential prokaryotic pathways in planktonic communities, while benthic communities are less influenced. The present work indicates that co-presence of nanoplastics and ofloxacin has synergistic combined effects on community structure shifts, niche breadth shrinking, network simplifying, and differential prokaryotic pathways inducing in marine microbial communities, suggesting nanoplastics and its combined impacts with other pollutions should be paid with more concerns.

Microplastic migration and distribution in the terrestrial and aquatic environments: A threat to biotic safety

Plastics production has been increasing over years, while their recycling rate is lower, resulting in huge amounts of microplastics (MP) accumulating in the environment. Although the environmental behaviors of MPs have been focused on in recent years, the migration, distribution and adverse effects of MPs in terrestrial and aquatic environments are still not systematically understood. In this review, based on the newest publications from the core database of the Web of Science, both the migration and distribution of MPs were summarized, as well as MPs transfer in biota and their biological effects were also focused on. Generally, the complicated and numerous pathways of MPs migration lead to their distribution throughout or nearly all environments on a global scale. However, the migration mechanisms of MPs with various sizes, shapes, and colors by physicochemical and biological processes, and the prediction models of MP migration and distribution, are deficient, despite these properties being highly related to MPs migration and bio-safety. Although MPs have already invaded microorganisms, plants, animals, and even human beings, the biological effects still need more study, so far as their sizes and shapes and also their composition and adsorption are concerned. Moreover, based on the highlights and deficiencies of current studies, further studies have also been proposed. This review aims to help people re-evaluate the uncertain behaviors of MPs in various environments, and could be helpful to fully understand their biological effects in different environmental conditions.

Effects of biofilms on the retention and transport of PFOA in saturated porous media

Understanding the fate and transport of perfluorooctanoic acid (PFOA) in soil and groundwater is essential to reliable assessments of its risks. This study investigated the impacts of Gram-positive Bacillus subtilis (BS), Gram-negative Pseudomonas aeruginosa (PA) and wild microbiota (WM) biofilm on the transport of PFOA in saturated sand columns at two ionic strengths (i.e., 1.0 and 20.0 mM NaCl). The retention of PFOA in biofilm-coated sand columns was higher than that in uncoated sand columns, due to biofilm-induced reinforced hydrophobic interactions and surface roughness, and decreased zeta potential. However, the retention effects varied among biofilm bacterial species with PFOA retardation factors in PA, WM and BS columns of 1.29-1.38, 1.21-1.29 and 1.11-1.15, respectively. Notably, PA biofilm had the most pronounced effect on PFOA retention. While increasing ionic strength promoted the retention of PFOA in BS biofilm-coated sand, it had no significant impact on PFOA transport in PA and WM biofilm-coated sand. This could be attributed to the differences in biofilm composition, deviating the ionic strengths effects on electrostatic double layer compression. The advection dispersion equation coupled with two-site kinetic retention model well described the transport of PFOA in all saturated columns. Our findings reveal that biofilm plays important roles in PFOA transport in porous media, instructive for risk assessment and remediation of PFOA contamination.

Cotransport of microplastics and sulfanilamide antibiotics in groundwater: The impact of MP/SA ratio and aquifer media

The aim of this study was to investigate the effects of the aquifer media, structure type, and initial concentration ratio of contaminants on the cotransport behavior of microplastics (MPs) and sulfanilamide antibiotics (SAs) through a series of one-dimensional column experiments in groundwater. Under a single suspension system, the relative mass recovery rates of fine sand, medium sand, and coarse sand were 25.65%, 37.50%, and 57.91%, respectively. The breakthrough curve of MPs showed a weak and slow upward trend, indicating that the migration of MPs in aqueous media is mainly blocked by the surface. The migration results of different structure type on SAs (ST, SM, SM2, SMX) in a single suspension system indicated that the deposition rate coefficients (k_c) of the four SAs were 1.23 × 10^-1, 9.09 × 10^-2, 1.11 × 10^-1, and 8.87 × 10^-2. Under a binary suspension system (MPs:ST = 1:1), the maximum effluent concentration (MEC) of MPs in fine sand, medium sand, and coarse sand increased to 0.52, 0.64, and 0.88, respectively, and the relative mass recovery rates of ST were 22.79%, 23.59%, 20.25%. This results show that the coexistence of MPs and SAs significantly promotes the migration of MPs and inhibits that of SAs. It is mainly because of their carrier action, adsorption sites and additional deposit sites for MPs through SAs pre-deposition on media. When the initial concentration ratio was 2:1, the particles had the highest Zeta potential (-48.3 mV) and the highest potential barrier (3200 kBT), leading to the formation of complex aggregates (MPs-SAs-MPs) owing to the aggregation of colloidal MPs. The increase in the volume and number of MPs-SAs co-aggregates on the surface of the media as the initial concentration of MPs increases, which was mainly due to the disappearance of surface blocking effect and the occurrence of filtering maturation effect.

Effects of environmental and anthropogenic factors on the distribution and abundance of microplastics in freshwater ecosystems

Although microplastics are emerging marine pollutants that have recently attracted increasing attention, it is still difficult to identify their sources. This study reviewed 6487 articles to determine current research trends and found 237 effective concentration points after sorting, which were distributed in four regions and related to freshwater ecosystems. Results found that 15 environmental variables represented natural and anthropogenic environmental characteristics, of which seven environmental variables were selected for experimental modelling. Random forest models fitted sample data, thus facilitating the identification of regional microplastics distribution. The global random forest model had random forest importance scores (RFISs) for gross domestic product, population, and the proportion of agricultural land use were 15.76 %, 15.64 %, and 14.74 %, respectively; these indicate that human activities significantly affected the global distribution of microplastics. In Asia, agriculture and urban activities are the main sources of microplastics, with an RFIS of 11.58 % and 12.24 % for the proportion of agricultural and urban land use, respectively. Activities in urban areas were determined to be the main influencing factors in North America, with an RFIS of 13.92 % for the proportion of urban land use. Agricultural activities were the main influencing factors in Europe, with RFISs for the proportion of agricultural land use of 16.90 %. Our results indicate that region-specific policies are required to control microplastics in different regions, with soil composition being a latency factor that affects microplastics' distribution.

Oxidative Roles of Polystyrene-Based Nanoplastics in Inducing Manganese Oxide Formation under Light Illumination

Every year, large quantities of plastics are produced and used for diverse applications, growing concerns about the waste management of plastics and their release into the environment. Plastic debris can break down into millions of pieces that adversely affect natural organisms. In particular, the photolysis of micro/nanoplastics can generate reactive oxygen species (ROS). However, their oxidative roles in initiating redox chemical reactions with heavy and transition metals have received little attention. In this study, we investigated whether the photolysis of polystyrene (PS) nanoplastics can induce the oxidation of Mn²⁺(aq) to Mn oxide solids. We found that PS nanoplastics not only produced peroxyl radicals (ROO^•) and superoxide radicals (O₂^•-) by photolysis, which both play a role in unexpected Mn oxidation, but also served as a substrate for facilitating the heterogeneous nucleation and growth of Mn oxide solids and controlling the formation rate and crystalline phases of Mn oxide solids. These findings help us to elucidate the oxidative roles of nanoplastics in the oxidation of redox-active metal ions. The production of ROS from nanoplastics in the presence of light can endanger marine life and human health, and affect the mobility of the nanoplastics in the environment via redox reactions, which in turn may negatively impact their environmental remediation.

Changes in bacterial community structures in soil caused by migration and aging of microplastics

Microplastics (MPs) are classified as emerging pollutants and greatly threatens soil ecosystems. To determine the impact of microplastic migration on soil bacterial diversity, we conducted a 90-day indoor soil column simulation test. Soil and microplastic (granular polystyrene, polypropylene MPs) samples were collected from different soil layers on days 30, 60, and 90. The downward migration trend of MPs was obvious, and its surface functional groups, hydrophobic properties, and crystallinity changed. Bacterial diversity was significantly higher in the surrounding soil than on microplastic surfaces. Also, the topsoil has more bacterial diversity than the middle soil. A higher number of OTUs were detected on microplastic surfaces for the middle soil than in the topsoil. Proteobacteria abundance on microplastic surfaces in the topsoil gradually increased over the course of the experiment, while an opposite trend was observed for the middle soil. Nevertheless, Proteobacteria abundances in both layers were higher than in the surrounding soils. MPs alters the bacterial community composition of soils and provides unique substrates for colonization. The impacts of MPs on soil bacterial communities were better understood in this study. Our findings highlighted the relevance of MPs in soil ecosystems as well as the potential threats they pose.

Nanoplastics removal during drinking water treatment: Laboratory- and pilot-scale experiments and modeling

Microplastics detected in potable water sources and tap water have led to concerns about the efficacy of current drinking water treatment processes to remove these contaminants. It is hypothesized that drinking water resources contain nanoplastics (NPs), but the detection of NPs is challenging. We, therefore, used palladium (Pd)-labeled NPs to investigate the behavior and removal of NPs during conventional drinking water treatment processes including ozonation, sand and activated carbon filtration. Ozone doses typically applied in drinking water treatment plants (DWTPs) hardly affect the NPs transport in the subsequent filtration systems. Amongst the different filtration media, NPs particles were most efficiently retained when aged (i.e. biofilm coated) sand was used with good agreements between laboratory and pilot scale systems. The removal of NPs through multiple filtration steps in a municipal full-scale DWTP was simulated using the MNMs software code. Removal efficiencies exceeding 3-log units were modeled for a combination of three consecutive filtration steps (rapid sand filtration, activated carbon filtration and slow sand filtration with 0.4-, 0.2- and 3.0-log-removal, respectively). According to the results from the model, the removal of NPs during slow sand filtration dominated the overall NPs removal which is also supported by the laboratory-scale and pilot-scale data. The results from this study can be used to estimate the NPs removal efficiency of typical DWTPs with similar water treatment chains.

Experimental application of a zero-point charge based on pH as a simple indicator of microplastic particle aggregation

Micro/nanoplastics - a useful but threatening material - continuously require fundamental research on its behaviors and properties for aggregation. Zeta potential (ζ) has been using as an indicator to determine the optimal aggregation for particle removal in water treatment processes. In the field work, however, an alternative method for streamlining these tasks and reducing the variability in processing efficiency is necessary. To improve practical utility in the field work, this study aimed at investigating applicability of the zero-point charge (ZPC) of the isoelectric point (IEP; ψ_pI) as an alternative indicator for aggregation in place of ζ. For the purpose, this study conducted laboratory experiments and model simulations. The experiments measured ψ_pI of microplastics in a trivalent-electrolyte aqueous solution using various concentrations of polyaluminum chloride (PAC) for reproducing the behavior of microplastics in natural water environments. As a result, ψ_pI for polyethylene (PE) and polyvinylchloride (PVC) were found to be pH 6.59 and 6.43, respectively. The removal rates (r) depended on the aggregation at the initial pH and optimal PAC concentration. The experimental attachment efficiency (α_E), 0.14 to 0.4, showed a good correlation of over 95% with r, 0.04 to 0.84, both based on the pH change and PAC concentration and differing slightly with the type and size of the plastic. The highest α_E was achieved with the highest r when ψ_pI was close to zero in the pH range of 6-8 using the optimized PAC concentration. Based on the experimental results, the model confirmed the applicability of ψ_pI instead of ζ as an indicator of the aggregation by simulating α_E based on ψ_pI and ionic strength, which are themselves based on the change in pH. Therefore, this study provides some insights into behaviors of microplastics by using the isoelectric point (IEP, ψpI) as an indicator of aggregation of microplastics in place of ζ. The IEP method is limited by initial pH, optimal dosage of coagulant, and type and size of microplastics, but it will increase practical utility in the field.

Interaction of Surface-Modified Alumina Nanoparticles and Surfactants at an Oil/Water Interface: A Neutron Reflectometry, Scattering, and Enhanced Oil Recovery Study

The evaluation of the mechanism of nanoparticle (NP)/surfactant complex adsorption at the critical oil/water interface was studied. A sophisticated technique (neutron reflectometry) was used to give a unique insight on NP/oil interactions in oil recovery systems. Herein, the adsorption of two modified alumina NPs with different degrees of hydrophobicity [hydrophilic = 2-[2-(2-methoxyethoxy)ethoxy]acetic acid and hydrophobic = octanoic acid (OCT)] stabilized with two different surfactants were studied at the oil/water interface. A thin layer of deuterated (D) and hydrogenated (H) hexadecane (contrast matching silicon substrate) oil was formed on a silicon block by a spin coating freeze process. The distribution of the NPs across the oil/water interface with the CTAB surfactant is similar between the two systems. NPs coated with CTAB have more affinity toward the oil/water interface, which explains the oil recovery increase by around 5% when flooding the core with the OCT-NP/CTAB system compared to the surfactant flooding alone. These results suggest that the NP/surfactant complexes can have potential usage in EOR recovery applications.

Nanoparticles approach to eradicate bacterial biofilm-related infections: A critical review

Biofilm represents one of the crucial factors for the emergence of multi-drug resistance bacterial infections. The high mortality, morbidity and medical device-related infections are associated with biofilm formation, which requires primarily seek alternative treatment strategies. Recently, nanotechnology has emerged as a promising method for eradicating bacterial biofilm-related infection. The efficacy of nanoparticles (NPs) against bacterial infections interest great attention, and the researches on the subject are rapidly increasing. However, the majority of studies continue to focus on the antimicrobial effects of NPs in vitro, while only a few achieved in vivo and very few registered as clinical trials. The present review aimed to organize the scattered available information regarding NPs approach to eradicate bacterial biofilm-related infections. The current review highlighted the advantages and disadvantages associated with this approach, in addition to the challenges that prevent reaching the clinical applications. It was appeared that the production of NPs either as antimicrobials or as drug carriers requires further investigations to overcome the obstacles associated with their kinetic and biocompatibility.

Contribution, Composition, and Structure of EPS by In Vivo Exposure to Elucidate the Mechanisms of Nanoparticle-Enhanced Bioremediation to Metals

Bacterial extracellular polymeric substances (EPS) have been recently found to contribute most for metal removal in nanoenhanced bioremediation. However, the mechanism by which NPs affect EPS-metal interactions is not fully known. Here, Halomonas sp. was employed to explore the role of EPS after in vivo exposure to Cd/Pb and polyvinylpyrrolidone (PVP) coated iron oxide nanoparticles (IONPs, 20 mg L^-1) for 72 h. Cd-IONPs produced the highest concentrations of EPS proteins (136.3 mg L^-1), while Cd induced the most production of polysaccharides (241.0 mg L^-1). IONPs increased protein/polysaccharides ratio from 0.2 (Cd) to 1.2 (Cd-IONPs). The increased protein favors the formation of protein coronas on IONPs surface, which would promote Cd adsorption during NP-metal-EPS interaction. FTIR analysis indicated that the coexistence of Cd and IONPs interacted with proteins more strongly than with polysaccharides. Glycosyl monomer analyses suggested mannose and glucose as target sugars for EPS complexation with metals, and IONPs reduced metal-induced changes in monosaccharide profiles. Protein secondary structures changed in all treatments, but we could not distinguish stresses induced by metals from those by IONPs. These findings provide greater understanding of the role of EPS in NP-metal-EPS interaction, providing a better underpinning knowledge for the application of NP-enhanced bioremediation.

Effects of clay minerals on the transport of nanoplastics through water-saturated porous media

Clay minerals are important constituents of porous media. To date, only little is known about the transport and retention behavior of nanoplastics in clay-containing soil. To investigate the effects of clay minerals on the mobility of nanoplastics in saturated porous media, polystyrene nanoplastics (PS-NPs) were pumped through columns packed with sand and clay minerals (kaolinite and illite) at different pH and ionic strengths (IS). Mobility of PS-NPs decreased with increasing clay content attributed to physical straining effects (smaller pore throats and more complex flow pathways). Variations in pH and IS altered the surface charges of both PS-NPs and porous media and thus affecting the interaction energy. An increase of IS from 10 mM to 50 mM NaCl decreased the maximum energy barrier and secondary minimum from 142 K_BT to 84 K_BT and from -0.1 K_BT to -0.72 K_BT, respectively. Thus, the maximum C/C₀ ratio decreased from ~51% to ~0% (pH 5.9, 3% kaolinite). Among the two clay minerals, kaolinite showed a stronger inhibitory effect on PS-NPs transport compared to illite. For instance, at the same condition (3% clay content, pH 5.9, 10 mM NaCl), the (C/C₀)_max of PS-NPs in kaolinite was ~51%, while for illite, it was ~77%. The difference in transport inhibition was mainly attributed to amphoteric sites on the edges of kaolinite which served as favorable deposition sites at pH 5.9 (pH_pzc-edge is ~2.5 for illite and ~6.5 for kaolinite). Besides, the morphology of kaolinite was more complex than illite, which may retain more PS-NPs in kaolinite. Results and conclusions from the study will provide some valuable insights to better understand the fate of NPs in the soil-aquifer system.

Influence of Simplified Microbial Community Biofilms on Bacterial Retention in Porous Media under Conditions of Stormwater Biofiltration

Porous media filters are used widely to remove bacteria from contaminated water, such as stormwater runoff. Biofilms that colonize filter media during normal function can significantly alter performance, but it is not clear how characteristics of individual populations colonizing porous media combine to affect bacterial retention. We assess how four bacterial strains isolated from stormwater and a laboratory strain, Pseudomonas aeruginosa PAO1, alter Escherichia coli retention in experimental sand columns under conditions of stormwater filtration relative to a clean-bed control. Our results demonstrate that these strains differentially affect E. coli retention, as was previously shown for a model colloid. To determine whether E. coli retention could be influenced by changes in relative abundance of strains within a microbial community, we selected two pairs of biofilm strains with the largest observed differences in E. coli retention and tested how changes in relative abundance of strain pairs in the biofilm affected E. coli retention. The results demonstrate that E. coli retention efficiency is influenced by the retention characteristics of the strains within biofilm microbial community, but individual strain characteristics influence retention in a manner that cannot be determined from changes in their relative abundance alone. This study demonstrates that changes in the relative abundance of specific members of a biofilm community can significantly alter filter performance, but these changes are not a simple function of strain-specific retention and the relative abundance. Our results suggest that the microbial community composition of biofilms should be considered when evaluating factors that influence filter performance.

IMPORTANCE The retention efficiency of bacterial contaminants in biofilm-colonized biofilters is highly variable. Despite the increasing number of studies on the impact of biofilms in filters on bacterial retention, how individual bacterial strains within a biofilm community combine to influence bacterial retention is unknown. Here, we studied the retention of an E. coli K-12 strain, as a model bacterium, in columns colonized by four bacterial strains isolated from stormwater and P. aeruginosa, a model biofilm-forming strain. Simplified two-strain biofilm communities composed of combinations of the strains were used to determine how relative abundance of biofilm strains affects filter performance. Our results provide insight into how biofilm microbial composition influences bacterial retention in filters and whether it is possible to predict bacterial retention efficiency in biofilm-colonized filters from the relative abundance of individual members and the retention characteristics of cultured isolates.

Insight into the inhibitory mechanism of soluble ionic liquids on the transport of TiO2 nanoparticles in saturated porous media: Roles of alkyl chain lengths and counteranion types

Column experiments were carried out to investigate the transport of TiO₂ nanoparticles (nTiO₂) in water-saturated porous media in the presence of various imidazolium-based ionic liquids (ILs) with different alkyl chain lengths and counteranions. The results indicated that the effects of ILs on nTiO₂ transport were considerably dependent upon IL species. In general, the transport-inhibition effects increased with the increasing length of branched alkyl chain on the ILs (i.e., [C₆mim]Cl > [C₄mim]Cl > [C₂mim]Cl). The trend was dominated by the hydrophobicity effects of ILs. Meanwhile, the inhibitory effects of ILs were strongly related to the counteranions and followed the order of [C₄mim]Cl > [C₄mim][TOS] > [C₄mim][PF₆], mainly due to different electrostatic repulsion force between nanoparticles and porous media in the presence of various ILs. Furthermore, the inhibitory role of [C₄mim][TOS] in nTiO₂ transport under acidic conditions (i.e., pH 6.5) was greater than that under alkaline conditions (i.e., pH 8.0). The dominant mechanism was that the differences in the extent of electrostatic repulsion between sand grains and nTiO₂ with or without ILs at pH 6.5 were larger than that at pH 8.0. Moreover, two-site kinetic retention model and DLVO theory provided good descriptions for the transport behaviors of nTiO₂ with different ILs.

Extracellular electron transfer influences the transport and retention of ferrihydrite nanoparticles in quartz sand coated with Shewanella oneidensis biofilm

Microbial biofilm has been found to impact the mobility of nanoparticles in saturated porous media by altering physicochemical properties of collector surface. However, little is known about the influence of biofilm's biological activity on nanoparticle transport and retention. Here, the transport of ferrihydrite nanoparticles (FhNPs) was studied in quartz sands coated with biofilm of Shewanella oneidensis MR-1 that is capable of reducing Fe(III) through extracellular electron transfer (EET). It was found that MR-1 biofilm coating enhanced FhNPs' deposition under different pH/ionic strength conditions and humic acid concentrations. More importantly, when the influent electron donor (glucose) concentration was increased to promote biofilm's EET activity, the breakthrough of FhNPs in biofilm-coated sands was inhibited. A lack of continuous and stable supply of electron donor, on the contrary, led to remobilization and release of the originally retained FhNPs. Column experiments with biofilm of EET-deficient MR-1 mutants (ΔomcA/ΔmtrC and ΔcymA) further indicated that the impairment of EET activity decreased the retention of FhNPs. It is proposed that the effective surface binding and adhesion of FhNPs that is required by direct EET cannot be neglected when evaluating the transport of FhNPs in sands coated with electroactive biofilm.

Transport of nanoparticles in porous media and its effects on the co-existing pollutants

Nanomaterials are widely used in daily life owing to their superior characteristics. The release and transport of nanoparticles (NPs) in the environment is inevitable during their entire life cycle, posing a risk to the aquatic environment. Thus, considerable attention has been focused on the fate and behavior of NPs in porous media, as well as the co-transport of NPs with other pollutants. In this review, current knowledge about the retention and transport behavior of NPs in porous media is summarized. NP transport in porous media is dominated by various internal and external factors, including the characteristics of NPs, porous media, and water flow. Generally, NPs with high density, small particle size, and surface coating are easily transported in porous media with the characteristics of large size, smooth surface, and low water saturation. Meanwhile, high pH and velocity, low temperature, and natural organic matter-containing fluids are also conducive to NP transport. Aggregation, adsorption, straining, and blocking are the primary mechanisms by which NPs affect the transport of co-existing pollutants in porous media. Current research on NP transport has been performed predominantly using modal porous media (e.g., sand and glass beads); however, there is a large gap between simulated and natural porous media. Further studies should focus on the transport, fate, and interaction of NPs and coexistent pollutants in natural porous media, as well as the coupling mechanisms under actual environmental conditions.

Transport characteristics of fragmental polyethylene glycol terephthalate (PET) microplastics in porous media under various chemical conditions

Transport characteristics of fragmental polyethylene glycol terephthalate (PET) microplastics in porous media were elucidated via column experiments under a series combination of electrolytes, pH, and humic acid (HA) conditions. Fragmental PET microplastics showed low mobility in porous media with a small mass recovery rate (<50.1%) even under unfavorable retention conditions. The electrolyte, pH, and HA showed combined impact on PET microplastic transport. PET microplastics mobility was enhanced with decreasing electrolyte concentration, increasing pH, and increasing HA concentration. Basic properties (e.g. destiny and shape) of PET microplastics showed stronger effect on their transport behaviors in porous media rather than the experimental chemical conditions. In general, both environmental factors and basic properties played important roles in controlling the retention and transport of PET microplastics in porous media. A numerical model considering the second order kinetic deposition sites was applied to depict the retention and transport of PET microplastics in porous media. Model simulations well matched the experimental breakthrough curves. Given the fragmental PET microplastics have more realistic and irregular shapes, results from this study can improve present knowledge of the environmental fate and risk of microplastics in underground soil and water systems.

Microbial Fabrication of Nanomaterial and Its Role in Disintegration of Exopolymeric Matrices of Biofilm

Bacterial biofilms are responsible for the development of various chronic wound-related and implant-mediated infections and confer protection to the pathogenic bacteria against antimicrobial drugs and host immune responses. Hence, biofilm-mediated chronic infections have created a tremendous burden upon healthcare systems worldwide. The development of biofilms upon the surface of medical implants has resulted in the failure of various implant-based surgeries and therapies. Although different conventional chemical and physical agents are used as antimicrobials, they fail to kill the sessile forms of bacterial pathogens due to the resistance exerted by the exopolysaccharide (EPS) matrices of the biofilm. One of the major techniques used in addressing such a problem is to directly check the biofilm formation by the use of novel antibiofilm materials, local drug delivery, and device-associated surface modifications, but the success of these techniques is still limited. The immense expansion in the field of nanoscience and nanotechnology has resulted in the development of novel nanomaterials as biocidal agents that can be either easily integrated within biomaterials to prevent the colonization of microbial cells or directly approach the pathogen overcoming the biofilm matrix. The antibiofilm efficacies of these nanomaterials are accomplished by the generation of oxidative stresses and through alterations of the genetic expressions. Microorganism-assisted synthesis of nanomaterials paved the path to success in such therapeutic approaches and is found to be more acceptable for its "greener" approach. Metallic nanoparticles functionalized with microbial enzymes, silver-platinum nanohybrids (AgPtNHs), bacterial nanowires, superparamagnetic iron oxide (Fe₃O₄), and nanoparticles synthesized by both magnetotactic and non-magnetotactic bacteria showed are some of the examples of such agents used to attack the EPS.

Microbial Fabrication of Nanomaterial and Its Role in Disintegration of Exopolymeric Matrices of Biofilm

Bacterial biofilms are responsible for the development of various chronic wound-related and implant-mediated infections and confer protection to the pathogenic bacteria against antimicrobial drugs and host immune responses. Hence, biofilm-mediated chronic infections have created a tremendous burden upon healthcare systems worldwide. The development of biofilms upon the surface of medical implants has resulted in the failure of various implant-based surgeries and therapies. Although different conventional chemical and physical agents are used as antimicrobials, they fail to kill the sessile forms of bacterial pathogens due to the resistance exerted by the exopolysaccharide (EPS) matrices of the biofilm. One of the major techniques used in addressing such a problem is to directly check the biofilm formation by the use of novel antibiofilm materials, local drug delivery, and device-associated surface modifications, but the success of these techniques is still limited. The immense expansion in the field of nanoscience and nanotechnology has resulted in the development of novel nanomaterials as biocidal agents that can be either easily integrated within biomaterials to prevent the colonization of microbial cells or directly approach the pathogen overcoming the biofilm matrix. The antibiofilm efficacies of these nanomaterials are accomplished by the generation of oxidative stresses and through alterations of the genetic expressions. Microorganism-assisted synthesis of nanomaterials paved the path to success in such therapeutic approaches and is found to be more acceptable for its "greener" approach. Metallic nanoparticles functionalized with microbial enzymes, silver-platinum nanohybrids (AgPtNHs), bacterial nanowires, superparamagnetic iron oxide (Fe3O4), and nanoparticles synthesized by both magnetotactic and non-magnetotactic bacteria showed are some of the examples of such agents used to attack the EPS.

Effect of Strain-Specific Biofilm Properties on the Retention of Colloids in Saturated Porous Media under Conditions of Stormwater Biofiltration

Filter performance can be affected by bacterial colonization of the filtration media, yet little is known about how naturally occurring bacteria modify the surface properties of filtration media to affect colloidal removal. We used sand columns and simulated stormwater conditions to study the retention of model colloidal particles, carboxyl-modified-latex (CML) beads, in porous media colonized by naturally occurring bacterial strains. Colloid retention varied substantially across identical columns colonized by different, in some cases closely related, bacterial strains in a cell density independent manner. Atomic force microscopy was applied to quantify the interaction energy between CML beads and each bacterial strain's biofilm surface. We found interaction energy between CML and each strain was significantly different, with adhesive energies between the biofilm and CML, presumed to be associated with polymer-surface bonding, a better predictor of CML retention than other strain characteristics. Overall, the findings suggest that interactions with biopolymers in naturally occurring bacterial biofilms strongly influence colloid retention in porous media. This work highlights the need for more investigation into the role of biofilm microbial community composition on colloid removal in porous media to improve biofilter design and operation.

Exposure of nanoplastics to freeze-thaw leads to aggregation and reduced transport in model groundwater environments

Despite plastic pollution being a significant environmental concern, the impact of environmental conditions such as temperature cycling on the fate of nanoplastics in cold climates remains unknown. To better understand nanoplastic mobility in subsurface environments following freezing and thawing cycles, the transport of 28 nm polystyrene nanoplastics exposed to either constant (10°C) temperature or freeze-thaw (FT) cycles (-10°C to 10°C) was investigated in saturated quartz sand. The stability and transport of nanoplastic suspensions were examined both in the presence and absence of natural organic matter (NOM) over a range of ionic strengths (3-100 mM NaCl). Exposure to 10 FT cycles consistently led to significant aggregation and reduced mobility compared to nanoplastics held at 10°C, especially at low ionic strengths in the absence of NOM. While NOM increased nanoplastic mobility, it did not prevent the aggregation of nanoplastics exposed to FT. We compare our findings with existing literature and show that nanoplastics will largely aggregate and associate with soils rather than undergo long range transport in groundwater in colder climates following freezing temperatures. In fact, FT exposure leads to the formation of stable aggregates that are not prone to disaggregation. As one of the first studies to examine the coupled effect of cold temperature and NOM, this work highlights the need to account for climate and temperature changes when assessing the risks associated with nanoplastic release in aquatic systems.

Interactions between microplastics and organic pollutants: Effects on toxicity, bioaccumulation, degradation, and transport

Microplastics (MPs), defined as particles with diameters <5 mm and including nanoplastics (NPs), with diameters <1 μm, are characterized by large specific surface areas and hydrophobicity. In aquatic and terrestrial environments, MPs interact with co-occurring organic pollutants through sorption and desorption, which alters the environmental behavior of the pollutants, such as their toxicity, bioaccumulation, degradation, and transport. In this review, we summarize the results of current studies of the interactions between MPs and organic contaminants, and focus on the different mechanisms and subsequent ecological risks of contaminant transfer among environmental media, MPs and organisms. The sorption/desorption of organic pollutants on/from MPs is discussed with respect to solution conditions and the properties of both the MPs and the pollutants. More importantly, the ability of MPs to alter the toxicity, bioaccumulation, degradation, and transport of organic pollutants through these interactions is considered as well. We then examine the interrelationships of the different environmental behaviors of MPs and organic pollutants and the roles played by environmental processes. Finally, we identify the remaining knowledge gaps that must be filled in further studies in order to accurately evaluate the environmental risks of MPs and their associated organic pollutants.

Interactions of Gold and Silver Nanoparticles with Bacterial Biofilms: Molecular Interactions behind Inhibition and Resistance

Many bacteria have the capability to form a three-dimensional, strongly adherent network called 'biofilm'. Biofilms provide adherence, resourcing nutrients and offer protection to bacterial cells. They are involved in pathogenesis, disease progression and resistance to almost all classical antibiotics. The need for new antimicrobial therapies has led to exploring applications of gold and silver nanoparticles against bacterial biofilms. These nanoparticles and their respective ions exert antimicrobial action by damaging the biofilm structure, biofilm components and hampering bacterial metabolism via various mechanisms. While exerting the antimicrobial activity, these nanoparticles approach the biofilm, penetrate it, migrate internally and interact with key components of biofilm such as polysaccharides, proteins, nucleic acids and lipids via electrostatic, hydrophobic, hydrogen-bonding, Van der Waals and ionic interactions. Few bacterial biofilms also show resistance to these nanoparticles through similar interactions. The nature of these interactions and overall antimicrobial effect depend on the physicochemical properties of biofilm and nanoparticles. Hence, study of these interactions and participating molecular players is of prime importance, with which one can modulate properties of nanoparticles to get maximal antibacterial effects against a wide spectrum of bacterial pathogens. This article provides a comprehensive review of research specifically directed to understand the molecular interactions of gold and silver nanoparticles with various bacterial biofilms.

Nano-plastics and their analytical characterisation and fate in the marine environment: From source to sea

Polymer contamination is a major pollutant in all waterways and a significant concern of the 21st Century, gaining extensive research, media, and public attention. The polymer pollution problem is so vast; plastics are now observed in some of the Earth's most remote regions such as the Mariana trench. These polymers enter the waterways, migrate, breakdown; albeit slowly, and then interact with the environment and the surrounding biodiversity. It is these biodiversity and ecosystem interactions that are causing the most nervousness, where health researchers have demonstrated that plastics have entered the human food chain, also showing that plastics are damaging organisms, animals, and plants. Many researchers have focused on reviewing the macro and micro-forms of these polymer contaminants, demonstrating a lack of scientific data and also a lack of investigation regarding nano-sized polymers. It is these nano-polymers that have the greatest potential to cause the most harm to our oceans, waterways, and wildlife. This review has been especially ruthless in discussing nano-sized polymers, their ability to interact with organisms, and the potential for these nano-polymers to cause environmental damage in the marine environment. This review details the breakdown of macro-, micro-, and nano-polymer contamination, examining the sources, the interactions, and the fates of all of these polymer sizes in the environment. The main focus of this review is to perform a comprehensive examination of the literature of the interaction of nanoplastics with organisms, soils, and waters; followed by the discussion of toxicological issues. A significant focus of the review is also on current analytical characterisation techniques for nanoplastics, which will enable researchers to develop protocols for nanopolymer analysis and enhance understanding of nanoplastics in the marine environment.

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.

Influence of biofilm on the transport and deposition behaviors of nano- and micro-plastic particles in quartz sand

Biofilm, community of bacteria ubiquitously present in natural environment, may interact with plastic particles and affect the transport of plastic particles in environment. The significance of biofilm (Escherichia coli) on the transport and deposition behaviors of three different sized plastic particles (0.02 μm NPs, 0.2 μm MP and 2 μm MP) were examined under both 10 mM and 50 mM NaCl solutions by comparing the breakthrough curves and retained profiles of plastic particles in bare sand versus those in biofilm-coated sand. Regardless of ionic strengths, the presence of biofilm increases the deposition of all three sized plastic particles in porous media. Via employing X-ray microtomography imaging (XMT) and Scanning electron microscope (SEM), we find that the presence of biofilm could narrow the flow path especially near to the inlet of the column and increase the surface roughness of porous media (by decreasing DLVO repulsive interaction), which contributes to the enhanced the deposition of plastic particles. Extracellular polymeric substances (EPS) present on the biofilm are found to contribute to the enhanced deposition of plastic particles. Packed column experiments, quartz crystal microbalance with dissipation (QCM-D) as well as parallel plate flow chamber experiments all show that three major components of EPS, proteins, polysaccharide, and humic substances all contribute to the enhanced deposition of plastic particles. O-H and N-H groups present on cell surfaces are highly likely to form hydrogen bond with plastic particles and increase the deposition plastic particles. Elution experiments show that decreasing solution ionic strength could release small portion of plastic particles from both bare and biofilm-coated sand columns especially from the segments near to the column inlet (with slighter lower percentage from biofilm-coated columns based on the total mass of retained plastics). In contrast, increasing flow rate does not obviously detach the plastic particles that already deposited onto porous media. The results of this study clearly show that the presence of biofilm in natural environment could enhance the deposition and decrease the transport of plastic particles.

Biofilm Formation of Clinically Important Bacteria on Bio-Based and Conventional Micro/Submicron-Sized Plastics

Micron/submicron-sized plastic debris in the environment is a global issue of increasing concern and may harm human health. A large number of studies have shown that plastic debris has various toxicological effects on different organisms. Thus, efforts have increased to replace conventional plastics with bioplastics. However, investigations on the relation of submicron-sized bioplastics- and conventional plastics to culture-dependent biofilm formation and their similarities and discrepancies are still very limited. For this purpose, two end products made from bioplastics and their equivalent end products from conventional plastics were used to examine the response of the biofilm formation of selected clinically important bacteria. To evaluate the similarities and differences of submicron-sized bioplastics and conventional plastics on biofilm formation, the physicochemistry (particle size, zeta potential, chemical composition, and surface chemistry) of the tested plastics was examined, as well as the characteristics of the biofilms (categorization, protein/carbohydrate).

Bacteria-nanoparticle interactions in the context of nanofouling

The attachment of microbial communities to surfaces is a well-known problem recognized to be involved in a variety of critical issues in the sectors of food processing, chronic wounds, infection from implants, clogging of membranes and corrosion of equipment. Considering the importance of the detrimental impact of biofouling, it has received much attention in the scientific community and from concerned stakeholders. With the development of nanotechnology and the nowadays widespread use of engineered nanoparticles (ENPs), concerns have been raised regarding their fate in terrestrial and aquatic environments. Safety aspects and public health issues are critical in the management of handling nanomaterials and their nanowastes. The interactions of various types of nanoparticles (NPs) with planktonic bacteria have also received attention due to their antimicrobial properties. However, their behavior in regard to biofilms is not well understood although, in the environment, most of the bacteria prefer living in sessile communities. The question appears relevant considering the need to build knowledge on the fate of nanoparticles and the fact that no one can exclude the risk of accumulation of nanoparticles in biofilms and on surfaces leading to a form of nanofouling involving both engineered nanoparticles (ENPs) and nanoplastics. The present analysis of recent research accounts allows in identifying that (1) research activities related to water remediation systems have been mostly oriented on the impact of NPs on pre-existing biofilms, (2) experimental designs are restricted to few scenarios of exposure, usually limited to relative short-time periods although nanofouling could favour the development of multi-resistant bacterial species through sub-lethal exposures over prolong periods of time (3) nanofouling in other systems in which biofilms develop remains to be addressed, and (4) new research directions are required for investigating the mechanisms involved and the subsequent impact of nanofouling on bacterial consortium responses encountered in a variety of environments such as those prevailing in food production/processing settings. Finally, this review aims at providing recent information and insights on nanoparticle-bacterial interactions in the context of biofilms in order to supply an updated outlook of research perspectives that could help establish the framework for production, use and fate of nanomaterials as well as future research directions.

Focus topics on microplastics in soil: Analytical methods, occurrence, transport, and ecological risks

Microplastics with extremely high abundances are universally detected in marine and terrestrial systems. Microplastic pollution in the aquatic environment, especially in ocean, has become a hot topic and raised global attention. However, microplastics in soils has been largely overlooked. In this paper, the analytical methods, occurrence, transport, and potential ecological risks of microplastics in soil environments have been reviewed. Although several analytical methods have been established, a universal, efficient, faster, and low-cost analytical method is still not available. The absence of a suitable analytical method is one of the biggest obstacles to study microplastics in soils. Current data on abundance and distribution of microplastics in soils are still limited, and results obtained from different studies differ significantly. Once entering into surface soil, microplastics can migrate to deep soil through different processes, e.g. leaching, bioturbation, and farming activities. Presence of microplastics with high abundance in soils can alter fundamental properties of soils. But current conclusions on microplastics on soil organisms are still conflicting. Overall, research on microplastics pollution in soils is still in its infancy and there are gaps in the knowledge of microplastics pollution in soil environments. Many questions such as pollution level, ecological risks, transport behaviors and the control mechanisms are still unclear, which needs further systematical study.

Coating Sand with New Hydrophobic and Superhydrophobic Silica/Paraffin Wax Nanocapsules for Desert Water Storage and Transportation

Paraffin wax emulsions have gained immense attention as a cheap, environment-friendly, and aroma-free material for preparing superhydrophobic coatings. In this work, paraffin wax (PWs) capsules consisting of hydrophobic silica nanoparticles were used for coating desert sand. Different types of the hydrophobic silica nanoparticles, modified with new oleylamino- and oleylamide silane precursors, were prepared in the presence and absence of paraffin waxes. The particle sizes, surface charges, thermal stability, surface morphologies, and wetting characteristics of these nanoparticles were investigated. The combination of these superhydrophobic silica nanoparticles and desert sand, showed excellent water repellency; stable water droplets remained on the sand surface, without any wetting or permeation. Furthermore, the mixing of the superhydrophobic sand with untreated sand (mixing ratio 1:10 wt %), with a thickness of 2 cm, sustained a great water-holding capacity with a water column height of 35 cm. The good thermal stability of the PWs capsules containing hydrophobic silica nanoparticles, along with their good water-holding capacity, make them potential candidates for developing superhydrophobic sand for desert water storage and transportation.

Factors impacting the interactions of engineered nanoparticles with bacterial cells and biofilms: Mechanistic insights and state of knowledge

Since their advent a few decades ago, engineered nanoparticles (ENPs) have been extensively used in consumer products and industrial applications and their use is expected to continue at the rate of thousands of tons per year in the next decade. The widespread use of ENPs poses a potential risk of large scale environmental proliferation of ENPs which can impact and endanger environmental health and safety. Recent studies have shown that microbial biofilms can serve as an important biotic component for partitioning and perhaps storage of ENPs released into aqueous systems. Considering that biofilms can be one of the major sinks for ENPs in the environment, and that the field of biofilms itself is only three to four decades old, there is a recent and growing body of literature investigating the ENP-biofilm interactions. While looking at biofilms, it is imperative to consider the interactions of ENPs with the planktonic microbial cells inhabiting the bulk systems in the vicinity of surface-attached biofilms. In this review article, we attempt to establish the state of current knowledge regarding the interactions of ENPs with bacterial cells and biofilms, identifying key governing factors and interaction mechanisms, as well as prominent knowledge gaps. Since the context of ENP-biofilm interactions can be multifarious-ranging from ecological systems to water and wastewater treatment to dental/medically relevant biofilms- and includes devising novel strategies for biofilm control, we believe this review will serve an interdisciplinary audience. Finally, the article also touches upon the future directions that the research in the ENP-microbial cells/biofilm interactions could take. Continued research in this area is important to not only enhance our scientific knowledge and arsenal for biofilm control, but to also support environmental health while reaping the benefits of the 'nanomaterial revolution'.

Influence of Nano- and Microplastic Particles on the Transport and Deposition Behaviors of Bacteria in Quartz Sand

Plastic particles are widely present in the natural environment and are highly likely to interact with bacteria (the ubiquitous microbes in the natural environment), which might affect the transport and deposition of bacteria in porous media. In this study, the significance of plastic particles from nanoscale to micrometer-scale (0.02-2 μm) on the transport and deposition behaviors of bacteria ( Escherichia coli) in quartz sand was examined under environmentally relevant conditions in both NaCl and CaCl₂ solutions at pH 6. The results showed that the presence of different-sized plastic particles did not affect bacterial transport behaviors at low ionic strength (10 mM NaCl and 1 mM CaCl₂), whereas, at high ionic strength conditions (50 mM NaCl and 5 mM in CaCl₂), plastic particles increased bacterial transport in quartz sand. At low ionic strength conditions, the mobility of both plastic particles and bacteria was high, which might drive the negligible effects of plastic particles on bacterial transport behaviors. The mechanisms driving the enhanced cell transport at high ionic strength were different for different-sized plastic particles. Specifically, for 0.02 μm nanoplastic particles, the adsorption of plastic particles onto cell surfaces and the repel effect induced by suspended plastic particles contributed to the increased cell transport. As for 0.2 μm microplastics (MPs), the suspended plastic particles induced  repel effect contributed to the increased cell transport, whereas, for 2 μm MPs, the competition deposition sites by the plastic particles were the contributor to the increased cell transport.

Size-dependent transport and retention of micron-sized plastic spheres in natural sand saturated with seawater

A series of one-dimensional column experiments were conducted to investigate the transport and retention of micron-sized plastic spheres (MPs) with diameters of 0.1-2.0 μm in seawater-saturated sand. In seawater with salinity of 35 PSU (practical salinity units), the mass percentages recovered from the effluent (M_eff) of the larger MPs increased from 13.6% to 41.3%, as MP size decreased from 2.0 μm to 0.8 μm. This occurred because of the gradual reduction of physical straining effect of MPs in the pores between sands. The smaller MPs (0.6, 0.4, and 0.1 μm) showed the stronger inhibition of MPs mobility, with M_eff values of 11.5%, 11.9%, and 9.8%, respectively. This was due to the lower energy barriers (from 108 k_BT to 16 k_BT) between the smaller MPs and the sand surface, when compared with the larger MPs (from 296 k_BT to 161 k_BT). In particular, the aggregation of MPs (0.6 or 0.4 μm) triggered a progressive decrease in MP concentration in the effluent. Retention experiments showed that the vertical migration distance of most MP colloids was 0-4 cm at the inlet of column. For 0.6 or 0.4 μm MPs, the particles were concentrated over a 0-2 cm vertical distance. Moreover, the salinity (35-3.5 PSU) did not affect the transport of the larger MPs (2.0-0.8 μm). However, as seawater salinity decreased from 35 PSU to 17.5 or 3.5 PSU, the aggregation of the smaller MPs (0.6-0.1 μm) was dramatically inhibited or completely prevented. Meanwhile, ripening of the sand surface by the MPs (0.6 and 0.4 μm) no longer occurred. By contrast, all MPs in deionized water (0 PSU) achieved complete column breakthroughs because of the strong repulsive energy barrier (from 218 k_BT to 4192 k_BT) between the MPs and the sand surface. Consequently, we find that the transport and retention of MPs in sandy marine environment strongly relies on both the MP size and the salinity levels.

Microplastics and Nanoplastics in Aquatic Environments: Aggregation, Deposition, and Enhanced Contaminant Transport

Plastic litter is widely acknowledged as a global environmental threat, and poor management and disposal lead to increasing levels in the environment. Of recent concern is the degradation of plastics from macro- to micro- and even to nanosized particles smaller than 100 nm in size. At the nanoscale, plastics are difficult to detect and can be transported in air, soil, and water compartments. While the impact of plastic debris on marine and fresh waters and organisms has been studied, the loads, transformations, transport, and fate of plastics in terrestrial and subsurface environments are largely overlooked. In this Critical Review, we first present estimated loads of plastics in different environmental compartments. We also provide a critical review of the current knowledge vis-à-vis nanoplastic (NP) and microplastic (MP) aggregation, deposition, and contaminant cotransport in the environment. Important factors that affect aggregation and deposition in natural subsurface environments are identified and critically analyzed. Factors affecting contaminant sorption onto plastic debris are discussed, and we show how polyethylene generally exhibits a greater sorption capacity than other plastic types. Finally, we highlight key knowledge gaps that need to be addressed to improve our ability to predict the risks associated with these ubiquitous contaminants in the environment by understanding their mobility, aggregation behavior and their potential to enhance the transport of other pollutants.

Do natural biofilm impact nZVI mobility and interactions with porous media? A column study

Nanoparticles (NP) used as remediation agents for groundwater treatment may interact with biofilms naturally present, altering NP mobility and/or reactivity and thereby NP effectiveness. The influence of the presence of a multi species biofilm on the mobility of two types of zero-valent iron NP (nZVI; NANOFER 25S and optimized NANOFER STAR, NanoIron s.r.o. (Czech Republic)) was tested in laboratory experiments with columns mimicking aquifer conditions. Biofilms were grown in columns filled with sand in nitrate reducing conditions using groundwater from an industrial site as inoculum. After two months growth, they were composed of several bacterial species, dominated by Pseudomonas stutzeri. Biofilm strongly affected the physical characteristics of the sand, decreasing total porosity from ~30% to ~15%, and creating preferential pathways with high flow velocities. nZVI suspensions were injected into the columns at a seepage velocity of 10mday^-1. Presence of biofilm did not impact the concentrations of Fe at the column outlet nor the amount of total Fe retained in the sand, as attested by the measurement of magnetic susceptibility. However, it had a significant impact on NP size sorting as well as on total Fe distribution along the column. This suggests nZVI-biofilm interactions that were confirmed by microscopic observations using SEM/STEM coupled with energy-dispersive X-ray spectroscopy. Our study shows that biofilm modifies the water flow velocity in the porous media, favoring the transport of large aggregates and decreased NP mobility due to physical and chemical interactions.

Characterization of a biofilm-forming Shigella flexneri phenotype due to deficiency in Hep biosynthesis

Deficiency in biosynthesis of inner core of lipopolysaccharide (LPS) rendered a characteristic biofilm-forming phenotype in E. coli. The pathological implications of this new phenotype in Shigella flexneri, a highly contagious enteric Gram-negative bacteria that is closely related to E. coli, were investigated in this study. The ΔrfaC (also referred as waaC) mutant, with incomplete inner core of LPS due to deficiency in Hep biosynthesis, was characteristic of strong biofilm formation ability and exhibited much more pronounced adhesiveness and invasiveness to human epithelial cells than the parental strain and other LPS mutants, which also showed distinct pattern of F-actin recruitment. Failure to cause keratoconjunctivitis and colonize in the intestine in guinea pigs revealed that the fitness gain on host adhesion resulted from biofilm formation is not sufficient to offset the loss of fitness on survivability caused by LPS deletion. Our study suggests a clear positive relationship between increased surface hydrophobicity and adhesiveness of Shigella flexneri, which should be put into consideration of virulence of Shigella, especially when therapeutic strategy targeting the core oligosaccharide (OS) is considered an alternative to deal with bacterial antibiotics-resistance.