Biogenic platinum and palladium nanoparticles as new catalysts for the removal of pharmaceutical compounds

Microbial assisted multifaceted amelioration processes of heavy-metal remediation: a clean perspective toward sustainable and greener future

Rapidly increasing heavy metal waste has adversely affected the environment and the Earth's health. The lack of appropriate remediation technologies has worsened the issue globally, especially in developing countries. Heavy-metals contaminants have severely impacted the environment and led to devastating conditions owing to their abundance and reactivity. As they are nondegradable, the potential risk increases even at a low concentration. However, heavy-metal remediation has increased with the up-gradation of technologies and integration of new approaches. Also, of all the treatment methodologies, microbial-assisted multifaceted approach for ameliorating heavy metals is a promising strategy for propagating the idea of a green and sustainable environment with minimal waste aggregation. Microbial remediation combined with different biotechniques could aid in unraveling new methods for eradicating heavy metals. Thus, the present review focuses on various microbial remediation approaches and their affecting factors, enabling recapitulation of the interplay between heavy-metals ions and microorganisms. Additionally, heavy-metals remediation mechanisms adapted by microorganisms, the role of genetically modified (GM) microorganisms, life cycle assessment (LCA), techno-economic assessment (TEA) limitations, and prospects of microbial-assisted amelioration of heavy-metals have been elaborated in the current review with focus toward "sustainable and greener future."

Efficacy of exopolysaccharide in dye-laden wastewater treatment: A comprehensive review

The discharge of dye-laden wastewater into the water streams causes severe water and soil pollution, which poses a global threat to aquatic ecosystems and humans. A diverse array of microorganisms such as bacteria, fungi, and algae produce exopolysaccharides (EPS) of different compositions and exhibit great bioflocculation potency to sustainably eradicate dyes from water bodies. Nanomodified chemical composites of EPS enable their recyclability during dye-laden wastewater treatment. Nevertheless, the selection of potent EPS-producing strains and physiological parameters of microbial growth and the remediation process could influence the removal efficiency of EPS. This review will intrinsically discuss the fundamental importance of EPS from diverse microbial origins and their nanomodified chemical composites, the mechanisms in EPS-mediated bioremediation of dyes, and the parametric influences on EPS-mediated dye removal through sorption/bioflocculation. This review will pave the way for designing and adopting futuristic green and sustainable EPS-based bioremediation strategies for dye-laden wastewater in situ and ex situ.

Biosynthesis of palladium, platinum, and their bimetallic nanoparticles using rosemary and ginseng herbal plants: evaluation of anticancer activity

In this research, palladium (II) and platinum (II), as well as their bimetallic nanoparticles were synthesized using medicinal plants in an eco-friendly manner. Rosemary and Ginseng extracts were chosen due to their promising anticancer potential. The synthesized nanoparticles underwent characterization through FT-IR spectroscopy, DLS, XRD, EDX, SEM, and TEM techniques. Once the expected structures were confirmed, the performance of these nanoparticles, which exhibited an optimal size, was evaluated as potential anticancer agents through in vitro method on colon cancer cell lines (Ls180, SW480). MTT assay studies showed that the synthesized nanoparticles induced cell death. Moreover, real-time PCR was employed to investigate autophagy markers and the effect of nanoparticles on the apoptosis process, demonstrating a significant effect of the synthesized compounds in this regard.

Biological upcycling of nickel and sulfate as electrocatalyst from electroplating wastewater

Upcycling nickel (Ni) to useful catalyst is an appealing route to realize low-carbon treatment of electroplating wastewater and simultaneously recovering Ni resource, but has been restricted by the needs for costly membranes or consumption of large amount of chemicals in the existing upcycling processes. Herein, a biological upcycling route for synchronous recovery of Ni and sulfate as electrocatalysts, with certain amount of ferric salt (Fe3+) added to tune the product composition, is proposed. Efficient biosynthesis of bio-NiFeS nanoparticles from electroplating wastewater was achieved by harnessing the sulfate reduction and metal detoxification ability of Desulfovibrio vulgaris. The optimal bio-NiFeS, after further annealing at 300 °C, served as an efficient oxygen evolution electrocatalyst, achieving a current density of 10 mA·cm-1 at an overpotential of 247 mV and a Tafel slope of 60.2 mV·dec-1. It exhibited comparable electrocatalytic activity with the chemically-synthesized counterparts and outperformed the commercial RuO2. The feasibility of the biological upcycling approach for treating real Ni-containing electroplating wastewater was also demonstrated, achieving 99.5 % Ni2+removal and 41.0 % SO42- removal and enabling low-cost fabrication of electrocatalyst. Our work paves a new path for sustainable treatment of Ni-containing wastewater and may inspire technology innovations in recycling/ removal of various metal ions.

Electrochemically assisted production of biogenic palladium nanoparticles for the catalytic removal of micropollutants in wastewater treatment plants effluent

Biogenic palladium nanoparticles (bio-Pd NPs) are used for the reductive transformation and/or dehalogenation of persistent micropollutants. In this work, H₂ (electron donor) was produced in situ by an electrochemical cell, permitting steered production of differently sized bio-Pd NPs. The catalytic activity was first assessed by the degradation of methyl orange. The NPs showing the highest catalytic activity were selected for the removal of micropollutants from secondary treated municipal wastewater. The synthesis at different H₂ flow rates (0.310 L/hr or 0.646 L/hr) influenced the bio-Pd NPs size. The NPs produced over 6 hr at a low H₂ flow rate had a larger size (D50 = 39.0 nm) than those produced in 3 hr at a high H₂ flow rate (D50 = 23.2 nm). Removal of 92.1% and 44.3% of methyl orange was obtained after 30 min for the NPs with sizes of 39.0 nm and 23.2 nm, respectively. Bio-Pd NPs of 39.0 nm were used to treat micropollutants present in secondary treated municipal wastewater at concentrations ranging from µg/L to ng/L. Effective removal of 8 compounds was observed: ibuprofen (69.5%) < sulfamethoxazole (80.6%) < naproxen (81.4%) < furosemide (89.7%) < citalopram (91.7%) < diclofenac (91.9%) < atorvastatin (> 94.3%) < lorazepam (97.2%). Removal of fluorinated antibiotics occurred at > 90% efficiency. Overall, these data indicate that the size, and thus the catalytic activity of the NPs can be steered and that the removal of challenging micropollutants at environmentally relevant concentrations can be achieved through the use of bio-Pd NPs.

Green Synthesis, Characterization, Antioxidant, Antibacterial and Enzyme Inhibition Effects of Chestnut (Castanea sativa) Honey-Mediated Silver Nanoparticles

In this study, chestnut honey-based silver nanoparticles (CH-AgNPs) were synthesized at different temperatures (30, 60 and 90 °C) and these nanoparticles were characterized by different techniques such as UV-vis spectrophotometer, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). The DPPH free radical scavenging assay was used to determine the antioxidant activity of the obtained nanoparticles. The inhibition effects of these nanoparticles for some clinically important enzymes such as myeloperoxidase and collagenase were investigated. In addition, the disk diffusion method (DDM), agar well diffusion (AWD), and minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) techniques were used to determine the antibacterial activity of CH-AgNPs. In honey-based silver nanoparticle production processes using green synthesis, it was determined that the nanoparticle sizes decreased from 55 to 27 nm with an increase in temperature. In addition, it was determined that the rate of inhibition of myeloperoxidase (36.4% to 34.0%) and collagenase enzymes (74.2% to 68.7%) increased with a decrease in particle size. As a result of the antibacterial activity tests, it was observed that CH-AgNPs have antibacterial activity against all target pathogens including Gram-positive and Gram-negative bacteria. The obtained results show that CH-AgNPs produced using chestnut honey have the potential to be used in fields such as medicine, pharmacy and cosmetic technology.

An effective bio-inspired synthesis of platinum nanoparticles using Caulerpa sertularioides and investigating their antibacterial and antioxidant activities

In this study, we report the synthesis of platinum nanoparticles (Cs-PtNPs) using an aqueous extract of Caulerpa sertularioides as a reducing agent. Cs-PtNPs were characterized by UV-Vis spectroscopy, fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), field emission electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDAX), high-resolution transmission electron microscopy (HR-TEM) and dynamic light scattering (DLS) analysis. Cs-PtNPs are spherical with a particle size of 6-22 nm. Cs-PtNPs have been shown to have highly effective antioxidant activities with 74% for DPPH, 63% for reducing power, and 59% for total antioxidant at 1 mg/ml, and results were compared with standard L-ascorbic acid. Furthermore, the Cs-PtNPs demonstrated excellent antibacterial activity against the Gram-negative bacteria, Vibrio parahaemolyticus with the highest zone of inhibition (18 mm) at 50 µg/ml. Moreover, Artemia nauplii showed less toxicity when treated with Cs-PtNPs at 150 µg/ml, indicating that the Cs-PtNPs are less toxic and environment friendly.

Biofabrication of nanoparticles: sources, synthesis, and biomedical applications

Nanotechnology is an emerging applied science delivering crucial human interventions. Biogenic nanoparticles produced from natural sources have received attraction in recent times due to their positive attributes in both health and the environment. It is possible to produce nanoparticles using various microorganisms, plants, and marine sources. The bioreduction mechanism is generally employed for intra/extracellular synthesis of biogenic nanoparticles. Various biogenic sources have tremendous bioreduction potential, and capping agents impart stability. The obtained nanoparticles are typically characterized by conventional physical and chemical analysis techniques. Various process parameters, such as sources, ions, and temperature incubation periods, affect the production process. Unit operations such as filtration, purification, and drying play a role in the scale-up setup. Biogenic nanoparticles have extensive biomedical and healthcare applications. In this review, we summarized various sources, synthetic processes, and biomedical applications of metal nanoparticles produced by biogenic synthesis. We highlighted some of the patented inventions and their applications. The applications range from drug delivery to biosensing in various therapeutics and diagnostics. Although biogenic nanoparticles appear to be superior to their counterparts, the molecular mechanism degradation pathways, kinetics, and biodistribution are often missing in the published literature, and scientists should focus more on these aspects to move them from the bench side to clinics.

Effective and reproducible biosynthesis of nanogold-composite catalyst for paracetamol oxidation

Pharmaceutical products are some of the most serious emergent pollutants in the environment, especially nowadays of the COVID-19 pandemic. In this study, nanogold-composite was prepared, and its catalytic activity for paracetamol degradation was investigated. Moreover, for the first time, recycled waste diatomite earth (WDE) from beer filtration was used for reproducible gold nanoparticle (Au NPs) preparation. We studied Au NPs by various psychical-chemical and analytical methods. Transmission and scanning electron microscopy were used for nanogold-composite morphology, size and shape characterization. Total element concentrations were determined using inductively coupled plasma mass and X-ray fluorescence spectrometry. X-ray powder diffraction analysis was used for crystal structure characterization of samples. Fourier transform infrared spectrometer was used to study the chemical changes before and after Au NP formation. The results revealed that the WDE served as both a reducing and a stabilizing agent for crystalline spherical 30 nm Au NPs as well as acting as a direct support matrix. The kinetics of paracetamol degradation was studied by high-performance liquid chromatography with a photodiode array detector. The conversion of paracetamol was 62% and 67% after 72 h in the absence or presence of light irradiation, respectively, with 0.0126 h^-1 and 0.0148 h^-1 reaction rate constants. The presented study demonstrates the successful use of waste material from the food industry for nanogold-composite preparation and its application as a promising catalyst in paracetamol removal.

Exploring Microbial-Based Green Nanobiotechnology for Wastewater Remediation: A Sustainable Strategy

Water scarcity due to contamination of water resources with different inorganic and organic contaminants is one of the foremost global concerns. It is due to rapid industrialization, fast urbanization, and the low efficiency of traditional wastewater treatment strategies. Conventional water treatment strategies, including chemical precipitation, membrane filtration, coagulation, ion exchange, solvent extraction, adsorption, and photolysis, are based on adopting various nanomaterials (NMs) with a high surface area, including carbon NMs, polymers, metals-based, and metal oxides. However, significant bottlenecks are toxicity, cost, secondary contamination, size and space constraints, energy efficiency, prolonged time consumption, output efficiency, and scalability. On the contrary, green NMs fabricated using microorganisms emerge as cost-effective, eco-friendly, sustainable, safe, and efficient substitutes for these traditional strategies. This review summarizes the state-of-the-art microbial-assisted green NMs and strategies including microbial cells, magnetotactic bacteria (MTB), bio-augmentation and integrated bioreactors for removing an extensive range of water contaminants addressing the challenges associated with traditional strategies. Furthermore, a comparative analysis of the efficacies of microbe-assisted green NM-based water remediation strategy with the traditional practices in light of crucial factors like reusability, regeneration, removal efficiency, and adsorption capacity has been presented. The associated challenges, their alternate solutions, and the cutting-edge prospects of microbial-assisted green nanobiotechnology with the integration of advanced tools including internet-of-nano-things, cloud computing, and artificial intelligence have been discussed. This review opens a new window to assist future research dedicated to sustainable and green nanobiotechnology-based strategies for environmental remediation applications.

Green Synthesis of Platinum Nanoparticles for Biomedical Applications

The diverse biological properties of platinum nanoparticles (PtNPs) make them ideal for use in the development of new tools in therapy, diagnostics, and other biomedical purposes. "Green" PtNPs synthesis is of great interest as it is eco-friendly, less energy-consuming and minimizes the amount of toxic by-products. This review is devoted to the biosynthesis properties of platinum nanoparticles based on living organisms (bacteria, fungi, algae, and plants) use. The participation of various biological compounds in PtNPs synthesis is highlighted. The biological activities of "green" platinum nanoparticles (antimicrobial, anticancer, antioxidant, etc.), the proposed mechanisms of influence on target cells and the potential for their further biomedical application are discussed.

AQDS Activates Extracellular Synergistic Biodetoxification of Copper and Selenite via Altering the Coordination Environment of Outer-Membrane Proteins

The biotransformation of heavy metals in the environment is usually affected by co-existing pollutants like selenium (Se), which may lower the ecotoxicity of heavy metals, but the underlying mechanisms remain unclear. Here, we shed light on the pathways of copper (Cu²⁺) and selenite (SeO₃^2-) synergistic biodetoxification by Shewanella oneidensis MR-1 and illustrate how such processes are affected by anthraquinone-2,6-disulfonate (AQDS), an analogue of humic substances. We observed the formation of copper selenide nanoparticles (Cu_2-xSe) from synergistic detoxification of Cu²⁺ and SeO₃^2- in the periplasm. Interestingly, adding AQDS triggered a fundamental transition from periplasmic to extracellular reaction, enabling 14.7-fold faster Cu²⁺ biodetoxification (via mediated electron transfer) and 11.4-fold faster SeO₃^2- detoxification (via direct electron transfer). This is mainly attributed to the slightly raised redox potential of the heme center of AQDS-coordinated outer-membrane proteins that accelerates electron efflux from the cells. Our work offers a fundamental understanding of the synergistic detoxification of heavy metals and Se in a complicated environmental matrix and unveils an unexpected role of AQDS beyond electron mediation, which may guide the development of more efficient environmental remediation and resource recovery biotechnologies.

Hydrodehalogenation of Trichlorofluoromethane over Biogenic Palladium Nanoparticles in Ambient Conditions

Among a number of persistent chlorofluorocarbons (CFCs, or freons), the emissions of trichlorofluoromethane (CFCl₃, CFC-11) have been increasing since 2002. Zero-valent-Pd (Pd⁰) catalysts are known to hydrodehalogenate CFCs; however, most studies rely on cost-inefficient and eco-unfriendly chemical synthesis of Pd⁰NPs and harsh reaction conditions. In this study, we synthesized Pd⁰ nanoparticles (Pd⁰NPs) using D. vulgaris biomass as the support and evaluated hydrodehalogenation of CFC-11 catalyzed by the biogenic Pd⁰NPs. The presence of D. vulgaris biomass stabilized and dispersed 3-6 nm Pd⁰NPs that were highly active. We documented, for the first time, Pd⁰-catalyzed simultaneous hydrodechlorination and hydrodefluorination of CFC-11 at ambient conditions (room temperature and 1 atm). More than 70% CFC-11 removal was achieved within 15 h with a catalytic activity of 1.5 L/g-Pd/h, dechlorination was 50%, defluorination was 41%, and selectivity to fully dehalogenated methane was >30%. The reaction pathway had a mixture of parallel and sequential hydrodehalogenation. In particular, hydrodefluorination was favored by higher H₂ availability and Pd⁰:CFC-11 ratio. This study offers a promising strategy for efficient and sustainable treatment of freon-contaminated water.

Bioelectrochemical systems-based metal removal and recovery from wastewater and polluted soil: Key factors, development, and perspective

Bioelectrochemical systems (BES) are considered efficient and sustainable technologies for bioenergy generation and simultaneously removal/recovery metal (loid)s from soil and wastewater. However, several current challenges of BES-based metal removal and recovery, especially concentrating target metals from complex contaminated wastewater or soil and their economic feasibility of engineering applications. This review summarized the applications of BES-based metal removal and recovery systems from wastewater and contaminated soil and evaluated their performances on electricity generation and metal removal/recovery efficiency. In addition, an in depth review of several key parameters (BES configurations, electrodes, catalysts, metal concentration, pH value, substrate categories, etc.) of BES-based metal removal and recovery was carried out to facilitate a deep understanding of their development and to suggest strategies for scaling up their specific application fields. Finally, the future intervention on multifunctional BES to improve their performances of mental removal and recovery were revealed.

Functionalized Platinum Nanoparticles with Biomedical Applications

Functionalized platinum nanoparticles have been of considerable interest in recent research due to their properties and applications, among which they stand out as therapeutic agents. The functionalization of the surfaces of nanoparticles can overcome the limits of medicine by increasing selectivity and thereby reducing the side effects of conventional drugs. With the constant development of nanotechnology in the biomedical field, functionalized platinum nanoparticles have been used to diagnose and treat diseases such as cancer and infections caused by pathogens. This review reports on physical, chemical, and biological methods of obtaining platinum nanoparticles and the advantages and disadvantages of their synthesis. Additionally, applications in the biomedical field that can be utilized once the surfaces of nanoparticles have been functionalized with different bioactive molecules are discussed, among which antibodies, biodegradable polymers, and biomolecules stand out.

A comprehensive review on removal of pollutants from wastewater through microbial nanobiotechnology -based solutions

Increasing wastewater pollution owing to the briskly rising human population, rapid industrialization, and fast urbanization has necessitated highly efficient wastewater treatment technologies. Although several methods of wastewater treatments are in practice, expensiveness, use of noxious chemicals, generation of unsafe by-products, and longer time consumption restrain their use to a great extent. Over the last few decades, nanotechnological wastewater treatment approaches have received widespread recognition globally. Microbially fabricated nanoparticles reduce the utilization of reducing, capping, and stabilizing agents, and exhibit higher adsorptive and catalytic efficiency than chemically synthesized nanomaterials. The present review comprehensively summarizes the applications of microbial nanotechnology in the removal of a wide range of noxious wastewater pollutants. Moreover, prospects and challenges associated with the integration of nanotechnology with other biological treatment technologies including algal-membrane bioreactor, aerobic digestion, microbial fuel cells, and microbial nanofiber webs have also been briefly discussed.

The Effect of a Hydrogen Reduction Procedure on the Microbial Synthesis of a Nano-Pd Electrocatalyst for an Oxygen-Reduction Reaction

Noble-metal electrocatalysts supported by biological-organism-derived carbons have attracted attention from the public due to the growing demands for green synthesis and environmental protection. Carbonization at high temperatures and hydrogen reduction are critical steps in this technical route. Herein, Shewanella oneidensis MR-1 were used as precursors, and the effects of the hydrogen-reduction procedure on catalysts were explored. The results showed that the performances of FHTG (carbonization followed by hydrogen reduction) displayed the best performance. Its ECSA (electrochemical surface area), MA (mass activity), and SA (specific activity) reached 35.01 m2 g−1, 58.39 A·g−1, and 1.66 A cm−2, respectively, which were 1.17, 1.75, and 1.50 times that of PHTG (prepared through hydrogen reduction followed by carbonization) and 1.56, 2.26, and 1.44 times that of DHTG (double hydrogen reduction). The high performance could be attributed to its fine particle size and rich N content, and the specific regulation mechanism was also proposed in this paper. This study opens a practical guide for effectively avoiding particle agglomeration during the fabrication process for catalysts.

Antibiotic Resistance in the Drinking Water: Old and New Strategies to Remove Antibiotics, Resistant Bacteria, and Resistance Genes

Bacterial resistance is a naturally occurring process. However, bacterial antibiotic resistance has emerged as a major public health problem in recent years. The accumulation of antibiotics in the environment, including in wastewaters and drinking water, has contributed to the development of antibiotic resistant bacteria and the dissemination of antibiotic resistance genes (ARGs). Such can be justified by the growing consumption of antibiotics and their inadequate elimination. The conventional water treatments are ineffective in promoting the complete elimination of antibiotics and bacteria, mainly in removing ARGs. Therefore, ARGs can be horizontally transferred to other microorganisms within the aquatic environment, thus promoting the dissemination of antibiotic resistance. In this review, we discuss the efficiency of conventional water treatment processes in removing agents that can spread/stimulate the development of antibiotic resistance and the promising strategies for water remediation, mainly those based on nanotechnology and microalgae. Despite the potential of some of these approaches, the elimination of ARGs remains a challenge that requires further research. Moreover, the development of new processes must avoid the release of new contaminants for the environment, such as the chemicals resulting from nanomaterials synthesis, and consider the utilization of green and eco-friendly alternatives such as biogenic nanomaterials and microalgae-based technologies.

Platinum Nanoparticles in Biomedicine: Preparation, Anti-Cancer Activity, and Drug Delivery Vehicles

Cancer is the main cause of morbidity and mortality worldwide, excluding infectious disease. Because of their lack of specificity in chemotherapy agents are used for cancer treatment, these agents have severe systemic side effects, and gradually lose their therapeutic effects because most cancers become multidrug resistant. Platinum nanoparticles (PtNPs) are relatively new agents that are being tested in cancer therapy. This review covers the various methods for the preparation and physicochemical characterization of PtNPs. PtNPs have been shown to possess some intrinsic anticancer activity, probably due to their antioxidant action, which slows tumor growth. Targeting ligands can be attached to functionalized metal PtNPs to improve their tumor targeting ability. PtNPs-based therapeutic systems can enable the controlled release of drugs, to improve the efficiency and reduce the side effects of cancer therapy. Pt-based materials play a key role in clinical research. Thus, the diagnostic and medical industries are exploring the possibility of using PtNPs as a next-generation anticancer therapeutic agent. Although, biologically prepared nanomaterials exhibit high efficacy with low concentrations, several factors still need to be considered for clinical use of PtNPs such as the source of raw materials, stability, solubility, the method of production, biodistribution, accumulation, controlled release, cell-specific targeting, and toxicological issues to human beings. The development of PtNPs as an anticancer agent is one of the most valuable approaches for cancer treatment. The future of PtNPs in biomedical applications holds great promise, especially in the area of disease diagnosis, early detection, cellular and deep tissue imaging, drug/gene delivery, as well as multifunctional therapeutics.

Reduction and removal of Cr(VI) in water using biosynthesized palladium nanoparticles loaded Shewanella oneidensis MR-1

In materials science, "green" synthesis has gotten a lot of interest as a reliable, long-lasting, and ecofriendly way to make a variety of materials/nanomaterials, including metal/metal oxide nanomaterials. To accommodate various biological materials, green synthesis of metallic nanoparticles has been used (e.g., bacteria, fungi, algae, and plant extracts). In this work, Shewanella oneidensis MR-1 was used to biosynthesize palladium nanoparticles (bioPd) under aerobic conditions for the Cr(VI) bio-reduction. The size and distribution of bio-Pd are controlled by adjusting the ratio of microbial biomass and palladium precursors. The high cell: Pd ratio has the smallest average particle size of 6.33 ± 1.69 nm. And it has the lowest electrocatalytic potential (-0.132 V) for the oxidation of formic acid, which is 0.158 V lower than commercial Pd/C (5%). Our results revealed that the small size and uniformly distributed extracellular bio-Pd could achieve completely catalytic reduction of 200 mg/L Cr(VI) solution within 10 min, while the commercial Pd/C (5%) need at least 45 min. The bio-Pd materials maintain a high reduction during five cycles. Microorganisms play an important role in the whole process, which can fully disperse palladium nanoparticles, completely reduce Cr(VI), and effectively adsorb Cr(III). This work expands our understanding and provides a reference for the design and development of efficient and green bio-Pd catalysts for environmental pollution control under simple and mild conditions.

Biogenic metal nanoparticles with microbes and their applications in water treatment: a review

Due to their unique characteristics, nanomaterials are widely used in many applications including water treatment. They are usually synthesized via physiochemical methods mostly involving toxic chemicals and extreme conditions. Recently, the biogenic metal nanoparticles (Bio-Me-NPs) with microbes have triggered extensive exploration. Besides their environmental-friendly raw materials and ambient biosynthesis conditions, Bio-Me-NPs also exhibit the unique surface properties and crystalline structures, which could eliminate various contaminants from water. Recent findings in the synthesis, morphology, composition, and structure of Bio-Me-NPs have been reviewed here, with an emphasis on the metal elements of Fe, Mn, Pd, Au, and Ag and their composites which are synthesized by bacteria, fungi, and algae. Furthermore, the mechanisms of eliminating organic and inorganic contaminants with Bio-Me-NPs are elucidated in detail, including adsorption, oxidation, reduction, and catalysis. The scale-up applicability of Bio-Me-NPs is also discussed.

Role of driven approach on the piezoelectric ozonation processes: Comparing ultrasound with hydro-energy as driving forces

Driven approach is vital for evaluating degradation and energy efficiencies of piezocatalysis process. Thus, piezoelectric ozonation processes driven by hydraulic (HPE-O₃) and ultrasonic (UPE-O₃) forces were compared systematically, using BaTiO₃ as piezoelectric material for ibuprofen (IBP) degradation. The synergy indexes of HPE-O₃ and UPE-O₃ processes were 4.51 and 5.78, respectively. Besides, UPE-O₃ process (88.84%) achieved better mineralization efficiency than HPE-O₃ process (68.80%) in 90 min. Nevertheless, the energy consumptions of HPE-O₃ process was only 4.01‰ of UPE-O₃ process. The formation rate and concentration of ^•OH (the dominant active species in both processes) in UPE-O₃ process were 2-3 times higher than that in HPE-O₃ process. Notably, piezoelectric potential and current density driven by ultrasound were approximately 47500-fold and 40-fold than those by hydro-energy, respectively. These led to the difference of ^•OH paths between HPE-O₃ and UPE-O₃ processes. Further analyses indicated that ^•OH was mainly generated by single-electron transfer without H₂O₂ generation in HPE-O₃ process, whereas both single- and double-electron transfer (with H₂O₂ generation) contributed to the production of ^•OH in UPE-O₃ process. This study revealed the mechanism of piezoelectric ozonation process with different driven approaches and may provide valuable reference for selection of driven approaches in piezocatalytic study and application.

Development of biogenic bimetallic Pd/Fe nanoparticle-impregnated aerobic microbial granules with potential for dye removal

The objective of this study was to develop bimetallic core-shell Pd/Fe nanoparticles on the surface of aerobic microbial granules (Bio-Pd/Fe) and to evaluate their dye removal potential using a representative dye, methyl orange (MO). The aerobic microbial granules (1.5 ± 0.32 mm) were grown for 70 days in a 3-L glass sequencing batch reactor (SBR) with a 12-h cycle time. The Bio-Pd/Fe formation was catalyzed by the Bio-H₂ gas produced by the granules. The developed Bio-Pd/Fe was further used for MO removal from aqueous solutions, and the reaction parameters were optimized by response surface methodology (RSM). The XRD, SEM, EDAX, elemental mapping, and XPS studies confirmed the formation of Bio-Pd/Fe. Under the optimized removal conditions, 99.33% MO could be removed by Bio-Pd/Fe, whereas removal by Bio-Pd, Bio-Fe, aerobic microbial granules, and heat-killed granules were found to be quite low (68.91 ± 0.2%, 76.8 ± 0.3%, 19.8 ± 0.6%, and 6.59 ± 0.2%, respectively). The mechanism of removal was investigated by UV-visible spectroscopy, redox potential analysis, HR-LCMS analyses of the solution phase, and XRD and XPS analyses of the solid sorbent. The degradation products of MO exhibited m/z values corresponding to 292, 212, and 160 m/z. The remnant toxicity of the intermediate degradation products was analysed using freshwater algae, Scenedesmus sp. And Allium cepa, as indicator organisms. These assays suggested that after the treatment with Bio-Pd/Fe, MO was transformed to a lesser toxic form.

Water Purification of Classical and Emerging Organic Pollutants: An Extensive Review

The main techniques used for organic pollutant removal from water are adsorption, reductive and oxidative processes, phytoremediation, bioremediation, separation by membranes and liquid–liquid extraction. In this review, strengths and weaknesses of the different purification techniques are discussed, with particular attention to the newest results published in the scientific literature. This study highlighted that adsorption is the most frequently used method for water purification, since it can balance high organic pollutants removal efficiency, it has the possibility to treat a large quantity of water in semi-continuous way and has acceptable costs.

Nanoadsorbents in focus for the remediation of environmentally-related contaminants with rising toxicity concerns

Modern lifestyle demands high-end commodities, for instance, cosmetics, detergents, shampoos, household cleaning, sanitary items, medicines, and so forth. In recent years, these products' consumption has increased considerably, being antibiotics and some other pharmaceutical and personal care products (PPCPs). Several antibiotics and PPCPs represent a wide range of emerging contaminants with a straight ingress into aquatic systems, given their high persistence in seawater, effluent treatment plants, and even drinking water. Under these considerations, the necessity of developing new and affordable technologies for the treatment and sustainable mitigation of pollutants is highly requisite for a safer and cleaner environment. One possible mitigation solution is an effective deployment of nanotechnological cues as promising matrices that can contribute by attending issues and improving the current strategies to detect, prevent, and mitigate hazardous pollutants in water. Focused on nanoparticles' distinctive physical and chemical properties, such as high surface area, small size, and shape, metallic nanoparticles (MNPs) have been investigated for water remediation. MNPs gained increasing interest among research groups due to their superior efficiency, stability, and high catalyst activity compared with conventional systems. This review summarizes the occurrence of antibiotics and PPCPs and the application of MNPs as pollutant mitigators in the aquatic environment. The work also focuses on transportation fate, toxicity, and current regulations for environmental safety.

Enhanced Light-Driven Hydrogen Production by Self-Photosensitized Biohybrid Systems

Storage of solar energy as hydrogen provides a platform towards decarbonizing our economy. One emerging strategy for the production of solar fuels is to use photocatalytic biohybrid systems that combine the high catalytic activity of non-photosynthetic microorganisms with the high light-harvesting efficiency of metal semiconductor nanoparticles. However, few such systems have been tested for H₂ production. We investigated light-driven H₂ production by three novel organisms, Desulfovibrio desulfuricans, Citrobacter freundii, and Shewanella oneidensis, self-photosensitized with cadmium sulfide nanoparticles, and compared their performance to Escherichia coli. All biohybrid systems produced H₂ from light, with D. desulfuricans-CdS demonstrating the best activity overall and outperforming the other microbial systems even in the absence of a mediator. With this system, H₂ was continuously produced for more than 10 days with a specific rate of 36 μmol g_dcw ^-1  h^-1 . High apparent quantum yields of 23 % and 4 % were obtained, with and without methyl viologen, respectively, exceeding values previously reported.

Biogenic Nanoparticles: Synthesis, Characterisation and Applications

Nanotechnology plays a big part in our modern daily lives, ranging from the biomedical sector to the energy sector. There are different physicochemical and biological methods to synthesise nanoparticles towards multiple applications. Biogenic production of nanoparticles through the utilisation of microorganisms provides great advantages over other techniques and is increasingly being explored. This review examines the process of the biogenic synthesis of nanoparticles mediated by microorganisms such as bacteria, fungi and algae, and their applications. Microorganisms offer a disparate environment for nanoparticle synthesis. Optimum production and minimum time to obtain the desired size and shape, to improve the stability of nanoparticles and to optimise specific microorganisms for specific applications are the challenges to address, however. Numerous applications of biogenic nanoparticles in medicine, environment, drug delivery and biochemical sensors are discussed.

Bacteriogenic Platinum Nanoparticles for Application in Nanomedicine

Nanoscale materials have recently gained wide attention due to their potential to revolutionize many technologies and industrial sectors, including information technology, homeland security, transportation, energy, food safety, environmental science, catalysis, photonics and medicine. Among various nanoparticles, platinum nanoparticles (PtNPs) are widely used for biomedical applications, including imaging, implants, photothermal therapy and drug delivery. Indeed, PtNPs possesses intrinsic antimicrobial, antioxidant, and anticancer properties. Also, due to their remarkable catalytic activity, they are able to reduce the intracellular reactive oxygen species (ROS) levels and impair the downstream pathways leading to inflammation. Various approaches, including both physical and chemical methods, are currently employed for synthesis of PtNPs. However, the use of hazardous reaction conditions and toxic chemicals in these processes poses a potential threat to the environment and severely compromise the biocompatibility of the nanoparticles. Hereby, increasing need for exploitation of novel routes for synthesis of PtNPs has led to development of biological fabrication using microbes, specifically bacteria. Herein, we present a most comprehensive report on biogenesis of PtNPs by several bacteria like Acinetobacter calcoaceticus, Desulfovibrio alaskensis, Escherichia coli, Shewanella algae, Plectonema boryanum, etc. An overview of the underlying mechanisms of both enzymatic and non-enzymatic methods of synthesis is included. Moreover, this review highlights the scope of developing optimized process to control the physicochemical properties, such as the nanoparticle surface chemistry, charge, size and shape, which, in turn, may affect their nanotoxicity and response at the biointerface for nanomedicine applications.

Green-synthesized nanocatalysts and nanomaterials for water treatment: Current challenges and future perspectives

Numerous hazardous environmental pollutants in water bodies, both organic and inorganic, have become a critical global issue. As greener and bio-synthesized versions of nanoparticles exhibit significant promise for wastewater treatment, this review discusses trends and future prospects exploiting the sustainable applications of green-synthesized nanocatalysts and nanomaterials for the removal of contaminants and metal ions from aqueous solutions. Recent trends and challenges about these nanocatalysts and nanomaterials and their potential applications in wastewater treatment and water purification are highlighted including toxicity and biosafety issues. This review delineates the pros and cons and critical issues pertaining to the deployment of these nanomaterials endowed with their superior surface area, mechanical properties, significant chemical reactivity, and cost-effectiveness with low energy consumption, for removal of hazardous materials and contaminants from water; comprehensive coverage of these materials for industrial wastewater remediation, and their recovery is underscored by recent advancements in nanofabrication, encompassing intelligent and smart nanomaterials.

Palladium nanoparticles in situ synthesized on Cyclea barbata pectin as a heterogeneous catalyst for Heck coupling in water, the reduction of nitrophenols and alkynes

This study develops an effective method for in situ synthesis of PdNPs using Cyclea barbata pectin as green reducing and stabilizing reagent. The catalytic activity of nanocomposite was evaluated for Heck coupling reaction, reduction of nitrophenols and reduction of alkynes.

Sustainability consolidation via employment of biomimetic ecomaterials with an accentuated photo-catalytic potential: emerging progressions

Environmental pollution produced due to direct and untreated release of toxic organic pollutants such as dyes from the textile industries is not only effect the human life but also contaminates the ecosystem through different transferal modes. Green nanomaterials synthesized by using biological reducing agents offer sustainable, economically viable, facile, rapid and eco-friendly approach with photocatalytic degradation efficiencies >90% for organic dyes over the other traditional technologies. Current review has for the first time comprehensively abridged the suitability of green nanoparticles over chemogenic nanoparticles, the remediative role of these biogenic nanoparticles with major emphasis on the recent progressions in the photocatalysis of different toxic dyes and pollutants. Unlike physicochemically processed nanoparticles, biogenic nanoparticles has profound contribution to the sustainable development goals due to their cleaner and economical synthesis in addition to their detoxifying role. Meticulous review of the publications are strongly suggestive of the adoptability of biogenic nanoparticles at an implementation scale for their auspicious remediative role in addition to facile fabrication, natural reducing agents based synthetic mode, toxicity free and sustainable nature. However, the studies are also indicative of the need for utilization of biogenic synthesis at practical scale to derive maximum sustainability and ecological benefits.

Insight into the electrocatalytic performance of in-situ fabricated electroactive biofilm-Pd: The role of biofilm thickness, initial Pd(II) concentration and the exposure time to Pd precursor

Biogenic palladium (bio-Pd) nanoparticles have been considered as promising biocatalyst for energy generation and contaminants remediation in water and sediment. Recently, an electroactive biofilm-Pd (EAB-Pd) network, which can be used directly as electrocatalyst and show enhanced electrocatalytic performance, has exhibited tremendous application potential. However, the information regarding to the controllable biosynthetic process and corresponding catalytic properties is scarce. This study demonstrated that the catalytic performance of EAB-Pd could be influenced by Pd loading on bacteria cells (Pd/cells), which was crucial to determine the final distribution characteristic of Pd nanocrystal on EAB skeleton. For instance, the high Pd/cells (over 0.18 pg cell^-1) exhibited almost 6-fold and 1.5-fold enhancement over EAB-Pds with Pd/cells below 0.03 in catalytic current toward hydrogen evolution reaction and nitrobenzene reduction, respectively. In addition, the Pd/cells was found to be affected by the synthesis factors, such as the ratio of biomass to initial Pd(II) concentration (cells/Pd_II) and the exposure time of EAB to Pd(II) precursor solution. The Pd/cells increased significantly as the cell/Pd_II ratio decreased from ~5.5 × 10⁷ to ~1.3 × 10⁷ cells L mg^-1 or the prolongation of exposure time from 3 h to 24 h. The findings developed in this work extensively expand our knowledge for the in-situ designing biogenic electrocatalyst and provide important information for the development of its catalytic property.

Biosynthesis of inorganic nanomaterials using microbial cells and bacteriophages

Inorganic nanomaterials are widely used in chemical, electronics, photonics, energy and medical industries. Preparing a nanomaterial (NM) typically requires physical and/or chemical methods that involve harsh and environmentally hazardous conditions. Recently, wild-type and genetically engineered microorganisms have been harnessed for the biosynthesis of inorganic NMs under mild and environmentally friendly conditions. Microorganisms such as microalgae, fungi and bacteria, as well as bacteriophages, can be used as biofactories to produce single-element and multi-element inorganic NMs. This Review describes the emerging area of inorganic NM biosynthesis, emphasizing the mechanisms of inorganic-ion reduction and detoxification, while also highlighting the proteins and peptides involved. We show how analysing a Pourbaix diagram can help us devise strategies for the predictive biosynthesis of NMs with high producibility and crystallinity and also describe how to control the size and morphology of the product. Here, we survey biosynthetic inorganic NMs of 55 elements and their applications in catalysis, energy harvesting and storage, electronics, antimicrobials and biomedical therapy. Furthermore, a step-by-step flow chart is presented to aid the design and biosynthesis of inorganic NMs employing microbial cells. Future research in this area will add to the diversity of available inorganic NMs but should also address scalability and purity.

Rapid and Facile Microwave-Assisted Synthesis of Palladium Nanoparticles and Evaluation of Their Antioxidant Properties and Cytotoxic Effects Against Fibroblast-Like (HSkMC) and Human Lung Carcinoma (A549) Cell Lines

We report here a simple microwave irradiation method (850 W, 3 min) for the synthesis of palladium nanoparticles (Pd NPs) using ascorbic acid (as reducing agent) and sodium alginate (as stabilizer agent). The synthesized nanoparticles were characterized using transmission electron microscopy (TEM), energy dispersive X-ray (EDX), X-ray diffraction spectroscopy (XRD), UV-Visible spectroscopy, and Fourier transform infrared spectroscopy (FTIR) techniques. Antioxidant properties and cytotoxic effects of as-synthesized Pd NPs and Pd (II) acetate were also assessed. UV-Vis study showed the formation of Pd NPs with maximum absorption at 345 nm. From TEM analysis, it was observed that the Pd NPs had spherical shape with particle size distribution of 13-33 nm. Based on DPPH radical scavenging activity and reducing power assay, the antioxidant activities of Pd NPs were significantly higher than the Pd (II) acetate (p < 0.05). At the same concentration of 640 μg/mL, the scavenging activities were 32.9 ± 3.2% (Pd (II) acetate) and 27.2 ± 2.1% (Pd NPs). For A549 cells treated 48 h with Pd NPs, Pd (II) acetate, and cisplatin, the measured concentration necessary causing 50% cell death (IC₅₀) was 7.2 ± 1.7 μg/mL, 32.1 ± 2.1 μg/mL, and 206.2 ± 3.5 μg/mL, respectively. On HSkMC cells, the IC₅₀ of the Pd NPs (320 μg/mL) was higher compared to Pd (II) acetate (228.7 ± 3.6 μg/mL), which confirmed lower cytotoxicity of the Pd NPs.

Synthesis of Metal Nanoparticles by Microorganisms

Metal nanoparticles (NPs), with sizes ranging from 1–100 nm, are of great scientific interest because their functions and features differ greatly from those of bulk metal. Chemical or physical methods are used to synthesize commercial quantities of NPs, and green, energy-efficient approaches generating byproducts of low toxicity are desirable to minimize the environmental impact of the industrial methods. Some microorganisms synthesize metal NPs for detoxification and metabolic reasons at room temperature and pressure in aqueous solution. Metal NPs have been prepared via green methods by incubating microorganisms or cell-free extracts of microorganisms with dissolved metal ions for hours or days. Metal NPs are analyzed using various techniques, such as ultraviolet-visible spectroscopy, electron microscopy, X-ray diffraction, electron diffraction, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Numerous publications have focused on microorganisms that synthesize various metal NPs. For example, Ag, Au, CdS, CdSe, Cu, CuO, Gd2O3, Fe3O4, PbS, Pd, Sb2O3, TiO2, and ZrO2 NPs have been reported. Herein, we review the synthesis of metal NPs by microorganisms. Although the molecular mechanisms of their synthesis have been investigated to some extent, experimental evidence for the mechanisms is limited. Understanding the mechanisms is crucial for industrial-scale development of microorganism-synthesized metal NPs.

Microbe-Mediated Extracellular and Intracellular Mineralization: Environmental, Industrial, and Biotechnological Applications

Microbe-mediated mineralization is ubiquitous in nature, involving bacteria, fungi, viruses, and algae. These mineralization processes comprise calcification, silicification, and iron mineralization. The mechanisms for mineral formation include extracellular and intracellular biomineralization. The mineral precipitating capability of microbes is often harnessed for green synthesis of metal nanoparticles, which are relatively less toxic compared with those synthesized through physical or chemical methods. Microbe-mediated mineralization has important applications ranging from pollutant removal and nonreactive carriers, to other industrial and biomedical applications. Herein, the different types of microbe-mediated biomineralization that occur in nature, their mechanisms, as well as their applications are elucidated to create a backdrop for future research.

Agar-induced hollow porous carbon nanospheres anchored platinum for high-performance hydrogenation

Hollow porous carbon has attracted a great deal of interest as catalyst-support because of its high surface area, low density and large pore volume. Herein, we develop a layer-by-layer assembly method to effectively load Pt nanoparticles on hollow porous carbon nanospheres (Pt/HPC) through using modified-SiO₂ nanospheres as the template and agar as the carbon resource. The gel properties of agar (e.g., sensitivity to temperature and high mechanical strength) makes the Pt nanoparticles well crosslink with carbon, as well as endows the carbon nanospheres with robust stability. The synthesized Pt/HPC was employed as a catalyst in the hydrogenation reduction of rhodamine B (RhB). The catalytic results demonstrate that Pt/HPC is very promising for RhB hydrogenation as compared to commercial Pt/C catalyst. It is proven that such excellent activity of Pt/HPC can be attributed to the combined merits of hollow porous architecture and well combination between HPC and Pt nanoparticles.

Effects of biogenic nanopalladium precipitation on the performance and microbial community structure of anaerobic granular sludge

Biogenic nanopalladium (BioPd) catalysts have drawn increasing attentions recently as a combination of metal catalyst over the support of biomass. Anaerobic granular sludge (AGS), as a special microbial granule, demonstrates a strong potential to reduce Pd(II) and precipitate Bio-Pd in the sludge body. The problem how the Bio-Pd precipitates would influence the function and microbial community of the Pd hosting AGS (Pd-AGS) remains unknown. In this study, Pd-AGS with different Bio-Pd loadings (1.7, 3.0, 4.4 and 8.0 wt% of Pd) was obtained through bio-reduction at different Na₂PdCl₄ concentrations. Effects of Bio-Pd precipitates on acidogenesis and methanogenesis of AGS were assayed. Response of bacterial and archaeal community of AGS towards Bio-Pd precipitation were also revealed based on high-throughput sequencing data on Illumina Miseq platform. Results showed that Bio-Pd precipitates affected the acidogenesis and methanogenesis process of the Pd-AGS, as the produced total volatile fatty acids (VFA) and methane were reduced by 25.8-53.0% and 33.9-87.7%, respectively, comparing to the native AGS. Bio-Pd precipitation resulted in microbial community shift and a decrease in the microbial diversity. The bacterial community suffered more influence than the archaeal community. Hydrogenotrophic methanogens were more sensitive to the toxicity of Pd(II)/Bio-Pd than acetotrophic methanogens. Overall, when the heterogeneous Pd-AGS catalyst is designed to possess both the function of microbial metabolism and Pd catalysis, it is necessary to control a suitable Pd(II) concentration during reduction process and the final Bio-Pd loading in AGS (<4.4 wt% of Pd).

Enhanced reductive removal of ciprofloxacin in pharmaceutical wastewater using biogenic palladium nanoparticles by bubbling H2

To treat waste with waste and efficiently remove the organic pollutant, waste palladiums(ii) were adsorbed and reduced on microorganism surface to catalyze the reductive removal of ciprofloxacin in pharmaceutical wastewater. By optimizing conditions such as pH and temperature, the amount of biogenic palladium adsorbed and reduced on E. coli reached 139.48 mg g⁻¹ (Pd/microorganisms). Moreover, most of the Pd(ii) was reduced to nanometer-sized Pd(0) as characterized by TEM and SEM with EDXA. Using the obtained biogenic palladium, the reductive removal of ciprofloxacin is up to 87.70% at 25 °C, 3.03 folds of that achieved in the absence of H₂. The results show that waste E. coli microorganisms can efficiently adsorb and remove waste Pd(ii) and produce Bio-Pd nanoparticle catalysts in the presence of H₂. This biogenic palladium presents high catalytic activity and great advantages in the reductive degradation of ciprofloxacin. Our method can also be applied to other waste metal ions to prepare the biogenic metals, facilitate their recovery and reuse in degrading organic pollutants in wastewater to achieve “treating waste using waste”.

A solution has been successfully introduced to three key challenges from the wastewater containing waste microorganisms, metal and ciprofloxacin, respectively.

A Comprehensive Review on the Synthesis, Characterization, and Biomedical Application of Platinum Nanoparticles

Platinum nanoparticles (PtNPs) are noteworthy scientific tools that are being explored in various biotechnological, nanomedicinal, and pharmacological fields. They are unique because of their large surface area and their numerous catalytic applications such as their use in automotive catalytic converters and as petrochemical cracking catalysts. PtNPs have been widely utilized not only in the industry, but also in medicine and diagnostics. PtNPs are extensively studied because of their antimicrobial, antioxidant, and anticancer properties. So far, only one review has been dedicated to the application of PtNPs to nanomedicine. However, no studies describe the synthesis, characterization, and biomedical application of PtNPs. Therefore, the aim of this review is to provide a comprehensive assessment of the current knowledge regarding the synthesis, including physical, chemical, and biological and toxicological effects of PtNPs on human health, in terms of both in vivo and in vitro experimental analysis. Special attention has been focused on the biological synthesis of PtNPs using various templates as reducing and stabilizing agents. Finally, we discuss the biomedical and other applications of PtNPs.

Direct current triggering enhanced anaerobic treatment of acetyl pyrimidine-containing wastewater in up-flow anaerobic sludge blanket coupled with bioelectrocatalytic system

In this study, the novel up-flow anaerobic sludge blanket coupled with bioelectrocatalytic system (UASB-BEC) was developed with the attempt to enhance treatment of acetyl pyrimidine-containing wastewater. The results revealed that higher current applied had a positive effect on acetyl pyrimidine (AP) degradation but a negative impact could be followed by the overhigh current (>1.26 A m^-3). Removal efficiencies of AP and total organic carbon (TOC) were as high as 96.3 ± 2.6% and 92.9 ± 3.2% while methane production reached up to 0.70 ± 0.03 NL-CH₄ L^-1-reactor d^-1 at applied current of 1.26 A m^-3, which were significantly higher those in control system. Moreover, high-throughput 16S rRNA gene pyrosequencing further indicated that Desulfovibrio and Methanimicrococcus species were specially enriched in suspended sludge and cathodic biofilm with current involvement. It could be reasonably speculated that enrichment of Desulfovibrio and Methanimicrococcus species could promote biotransformation of AP and final H₂-depended methylotrophic methanogenesis. This study could shed light on better understanding of AP transformation in bioelectrocatalytic system and provide a valuable reference to practical application of anaerobic AP-containing wastewater treatment.

Shotgun proteomic analysis of nanoparticle-synthesizing Desulfovibrio alaskensis in response to platinum and palladium

Platinum and palladium are much sought-after metals of critical global importance in terms of abundance and availability. At the nano-scale these metals are of even higher value due to their catalytic abilities for industrial applications. Desulfovibrio alaskensis is able to capture ionic forms of both of these metals, reduce them and synthesize elemental nanoparticles. Despite this ability, very little is known about the biological pathways involved in the formation of these nanoparticles. Proteomic analysis of D. alaskensis in response to platinum and palladium has highlighted those proteins involved in both the reductive pathways and the wider stress-response system. A core set of 13 proteins was found in both treatments and consisted of proteins involved in metal transport and reduction. There were also seven proteins that were specific to either platinum or palladium. Overexpression of one of these platinum-specific genes, a NiFe hydrogenase small subunit (Dde_2137), resulted in the formation of larger nanoparticles. This study improves our understanding of the pathways involved in the metal resistance mechanism of Desulfovibrio and is informative regarding how we can tailor the bacterium for nanoparticle production, enhancing its application as a bioremediation tool and as a way to capture contaminant metals from the environment.

A perspective on biogenic synthesis of platinum nanoparticles and their biomedical applications

In recent era, the interest on inorganic nanoparticles is augmenting due to their engrossing and uncanny properties. Among them, platinum nanoparticles (PtNPs) are highly remarkable owing to their intrinsic physicochemical and biological properties making them an effective candidate towards catalytic and biomedical applications. Nevertheless, conventional physical and chemical methodologies of PtNPs synthesis are among the most prevalent protocols to synthesize PtNPs of desired shape and size. However, the above methods create notable concern to health and environment due to the use of harsh and toxic chemicals as well as violent reaction conditions. Hence, an economic, eco-friendly, non-toxic and sustainable route for the synthesis of PtNPs is the need of the hour to circumvent the shortcomings associated with conventional methodologies. In this aspect, the approach of green synthesis has lightened up the way for the environmentally benign synthesis of PtNPs. Interestingly, this review focuses chiefly on the green synthesis of PtNPs from various biological entities such as microorganisms, plants, seaweeds and other innovative miscellaneous protocols. Furthermore, it also summarizes the potential biomedical applications of PtNPs especially as an antibacterial agent and their role as nanomedicine. Overall, the emerging biogenic synthesis of PtNPs makes it feasible to foresee more promising biomedical outcomes in the upcoming future.