Optimization of fipronil degradation by heterogeneous photocatalysis: Identification of transformation products and toxicity assessment

Recent Advances in Black Phosphorous-Based Photocatalysts for Degradation of Emerging Contaminants

The recalcitrant nature of emerging contaminants (ECs) in aquatic environments necessitates the development of effective strategies for their remediation, given the considerable impacts they pose on both human health and the delicate balance of the ecosystem. Semiconductor-based photocatalytic technology is recognized for its dual benefits in effectively addressing both ECs and energy-related challenges simultaneously. Among the plethora of photocatalysts, black phosphorus (BP) stands as a promising nonmetallic candidate, offering a host of advantages including its tunable direct band gap, broad-spectrum light absorption capabilities, and exceptional charge mobility. Nevertheless, pristine BP frequently underperforms, primarily due to issues related to its limited ambient stability and the rapid recombination of photogenerated electron-hole pairs. To overcome these challenges, substantial research efforts have been devoted to the creation of BP-based photocatalysts in recent years. However, there is a noticeable absence of reviews regarding the advancement of BP-based materials for the degradation of ECs in aqueous solutions. Therefore, to fill this gap, a comprehensive review is undertaken. In this review, we first present an in-depth examination of the fabrication processes for bulk BP and BP nanosheets (BPNS). The review conducts a thorough analysis and comparison of the merits and limitations inherent in each method, thereby delineating the most auspicious avenues for future research. Then, in line with the pathways followed by photogenerated electron-hole pairs at the interface, BP-based photocatalysts are systematically categorized into heterojunctions (Type I, Type II, Z-scheme, and S-scheme) and hybrids, and their photocatalytic performances against various ECs and the corresponding degradation mechanisms are comprehensively summarized. Finally, this review presents personal insights into the prospective avenues for advancing the field of BP-based photocatalysts for ECs remediation.

Removal of fipronil by advanced oxidative processes using sulfite activated by cobalt immobilized on silica

Sulfite auto-oxidation catalyzed by cobalt complexed with ammonia deposited on silica (CoNSi) was used to generate sulfate radicals. The material was characterized by ATR-FTIR, suggesting that the silica structure did not change, and SEM-EDS, indicating an uniform dispersion of cobalt across the material surface according with XRD results. BET analysis provided information on a mesoporous material (type IV isotherm) with regular morphology (H1 hysteresis). The DSC analysis showed that CoNSi is thermally stable under the studied conditions. Quantitative analysis of Fipronil (FIP) was performed by HPLC-DAD, where the applied method was selective and linear. The Box-Behnken experimental design (BBD) method was used to define the best condition for removing the analyte in water. It was found that in 60 min, 76% removal of 1.8 mg L-1 of FIP was reached by adding 0.30 g of the material and 0.30 g of the sulfite in a solution under stirring, aeration, pH 8.0, and room temperature and protected from radiation. However, analysis of cobalt leaching into the solution by FAAS showed a small amount of the metal (0.44 mg L-1) informing that the synthesis of the material must be improved.

Photocatalytic performance of SiO2@TiO2 spheres in selective conversion of oxidation of benzyl alcohol to benzaldehyde and reduction of nitrobenzene to aniline

Selective photocatalytic oxidation of benzyl alcohol to benzaldehyde and reduction of nitrobenzene to aniline reactions are investigated by using SiO2@TiO2 spheres produced in a simple route using chitosan as a template. The spheres are predominantly macroporous and, the XRD points out an amorphous crystallographic profile suggesting the uniform distribution of TiO2. Under low-power lighting for 4 hours, the conversions achieved was of the order of 49% and 99% for benzyl alcohol and nitrobenzene, respectively, with selectivity to benzaldehyde and aniline of 99% in both reactions. The study also follows the effects of the solvent and the presence of O2.

Electrochemical oxidation of fipronil pesticide is effective under environmental relevant concentrations

Pesticide overuse has posed a threat to agricultural community as well as for the environment. In order to treat this pollution at its source, decentralized and selective technologies such as electrochemical processes appear especially relevant to avoid the possible generation of toxic degradation products. Electrochemical oxidation (ECO) is a promising electrochemically-driven process, but most studies evaluate performance under pollutant concentrations that are orders of magnitude higher than environmental relevant conditions. This work explores ECO treatment of fipronil using boron-doped diamond (BDD) as anode and titanium plate as cathode at small concentrations found in agricultural run-off. The effect of applied current density and initial contaminant concentrations were also studied. For a current density of 20 mA cm^-2 the decrease of COD and fipronil were about 97% and 100% after 360 min of electrolysis, respectively. Engineering figures of merit were evaluated to assess competitiveness of ECO decentralized propositions. Results suggest effective and feasible treatment of fipronil by ECO.

Palladium and Graphene Oxide Doped ZnO for Aqueous Acetamiprid Degradation under Visible Light

Acetamiprid is a neonicotinoid insecticide widely used in pest control. In recent years, it has been considered as a contaminant in groundwater, lakes, and rivers. Photocatalysis under visible light radiation proved to be an effective process for getting rid of several organic pollutants. In the present work, photodegradation of aqueous acetamiprid was investigated over bare zinc oxide (ZnO) photocatalyst as well as ZnO doped with either palladium or palladium combined with graphene oxide. Both ZnO and doped-ZnO were synthesized via a microwave-assisted hydrothermal procedure. The obtained photocatalysts were characterized using different techniques. After 5 h of reaction at ambient temperature under visible light irradiation, acetamiprid conversions attained ca. 38, 82, and 98% in the presence of bare ZnO, Pd-doped ZnO and Pd-GO-doped ZnO photocatalysts, respectively, thus demonstrating the positive effect of Pd- and GO-doping on the photocatalytic activity of ZnO. In addition, Pd-GO-doped ZnO was shown to keep its activity even when it is recycled five times, thus proving its stability in the reaction medium.

Preparation of freeze-dried bioluminescent bacteria and their application in the detection of acute toxicity of bisphenol A and heavy metals

Current chemical analysis approaches for contaminants have failed to reveal their biotoxicity. Moreover, conventional bioassays are time consuming and exhibit poor repeatability. In this study, we performed the acute toxicity detection of various contaminants (chromium (Cr), cadmium (Cd), lead (Pb), arsenic (As), mercury (Hg), tin (Sn), nickel (Ni), and bisphenol A (BPA)) with four bioluminescent bacteria (Vibrio qinghaiensis Q67, V. fischeri, Photobacterium phosphoreum T3, and P. phosphoreum 502) using a rapid, flexible, and low-cost bioassay. We found that the temperature affected the bacterial luminescence, and freeze-dried cells exhibited sensitive toxic responses to contaminants. Indeed, the optimized protectants containing 12% (w/v) trehalose, 4% sucrose, and 2% sorbitol displayed better luminescence and toxic sensitivity. Furthermore, freeze-dried powders of these strains were prepared and subjected to acute toxicity detection. The results showed that all contaminants exhibited acute toxicity toward Q67, but the other strains did not show obvious response to nickel and tin. The relative half-maximal effective concentration (EC50) values of BPA, Cr, Cd, Pb, As, Hg, Ni, and Sn to Q67 were 0.674, 1.313, 11.137, 5.921, 4.674, 0.911, 5.941, and 54.077 mg/L, respectively. In addition, the EC50 values of contaminants toward different strains were suggested to be statistically significant. Freeze-dried Q67 exhibited toxic responses to more contaminants than the other bioluminescent strains; therefore, Q67 was selected to be more suitable than the other strains for single and mixture toxicity detection tests. Compared with other strains, Q67 was more appropriate for the rapid screening of the mixture toxicity of contaminants in samples as a nonspecific screening sensor before the use of standard analysis approaches.

Biodegradation of fipronil: current state of mechanisms of biodegradation and future perspectives

Fipronil is a broad-spectrum phenyl-pyrazole insecticide that is widely used in agriculture. However, in the environment, its residues are toxic to aquatic animals, crustaceans, bees, termites, rabbits, lizards, and humans, and it has been classified as a C carcinogen. Due to its residual environmental hazards, various effective approaches, such as adsorption, ozone oxidation, catalyst coupling, inorganic plasma degradation, and microbial degradation, have been developed. Biodegradation is deemed to be the most effective and environmentally friendly method, and several pure cultures of bacteria and fungi capable of degrading fipronil have been isolated and identified, including Streptomyces rochei, Paracoccus sp., Bacillus firmus, Bacillus thuringiensis, Bacillus spp., Stenotrophomonas acidaminiphila, and Aspergillus glaucus. The metabolic reactions of fipronil degradation appear to be the same in different bacteria and are mainly oxidation, reduction, photolysis, and hydrolysis. However, the enzymes and genes responsible for the degradation are somewhat different. The ligninolytic enzyme MnP, the cytochrome P450 enzyme, and esterase play key roles in different strains of bacteria and fungal. Many unanswered questions exist regarding the environmental fate and degradation mechanisms of this pesticide. The genes and enzymes responsible for biodegradation remain largely unexplained, and biomolecular techniques need to be applied in order to gain a comprehensive understanding of these issues. In this review, we summarize the literature on the degradation of fipronil, focusing on biodegradation pathways and identifying the main knowledge gaps that currently exist in order to inform future research. KEY POINTS: • Biodegradation is a powerful tool for the removal of fipronil. • Oxidation, reduction, photolysis, and hydrolysis play key roles in the degradation of fipronil. • Possible biochemical pathways of fipronil in the environment are described.

A comprehensive review of environmental fate and degradation of fipronil and its toxic metabolites

The use of pesticides to increase crop production has become one of the inevitable components of modern agriculture. Fipronil, a phenylpyrazoles insecticide, is one of the most widely used, systemic, broad-spectrum insecticides. Owing to its unique mode of action and selective toxicity, it was once regarded as safer alternatives to more toxic and persistent organochlorine insecticides. However, with the increased use, many studies have reported the toxicity of fipronil and its metabolites in various non-target organisms during the last two decades. Currently, it is regarded as one of the most persistent and lipophilic insecticides in the market. In the environment, fipronil can undergo oxidation, reduction, hydrolysis, or photolysis to form fipronil sulfone, fipronil sulfide, fipronil amide, or fipronil desulfinyl respectively. These metabolites except fipronil amide are more or less toxic and persistent than fipronil and have been reported from diverse environmental samples. Recently many studies have focused on the degradation and removal of fipronil residues from the environment. However, a comprehensive review summarizing and combining these recent findings is lacking. In the present review, we evaluate, summarize, and combine important findings from recent degradation studies of fipronil and its metabolites. An attempt has been made to elucidate the possible mechanism and pathways of degradation of fipronil and its toxic metabolites.

Chemical and toxicological evaluation along with unprecedented transformation products during photolysis and heterogeneous photocatalysis of chloramphenicol in different aqueous matrices

As the presence of antibiotics in environmental waters enhances antimicrobial resistance, photolysis and heterogeneous photocatalysis of chloramphenicol (CAP) were evaluated in deionized water (DW) and in sewage treatment plant (STP) effluent under black light and solar irradiation. Processes were compared in terms of CAP degradation, reaction kinetics, and electrical energy per order, as well as regarding theoretical toxicity, biodegradability, carcinogenicity, and mutagenicity of transformation products (TPs). Rate constants obtained under photolysis (0.008 min^-1) and heterogeneous photocatalysis (0.18 min^-1) only differed in DW. This is due to the generation of photo-active reactive oxygen species (HO^· and HO₂^·-/O₂^·-) under photolysis in STP effluent, as verified by experiments in the presence of 2-propanol and chloroform. Natural organic matter and HCO₃^- were the main responsible for reducing CAP degradation in STP effluent. Fifteen TPs were identified during both processes in DW, 13 of which are unprecedented. TPs were formed mainly via HO^· preferential attack on the aromatic ring and on the α-carbon, and some of them were classified as persistent and toxic, genotoxic, or carcinogenic by Toxtree software. Results confirm that solar photocatalysis is less costly than to photocatalysis under black light for wastewater treatment.

An update of the Worldwide Integrated Assessment (WIA) on systemic insecticides. Part 1: new molecules, metabolism, fate, and transport

With the exponential number of published data on neonicotinoids and fipronil during the last decade, an updated review of literature has been conducted in three parts. The present part focuses on gaps of knowledge that have been addressed after publication of the Worldwide Integrated Assessment (WIA) on systemic insecticides in 2015. More specifically, new data on the mode of action and metabolism of neonicotinoids and fipronil, and their toxicity to invertebrates and vertebrates, were obtained. We included the newly detected synergistic effects and/or interactions of these systemic insecticides with other insecticides, fungicides, herbicides, adjuvants, honeybee viruses, and parasites of honeybees. New studies have also investigated the contamination of all environmental compartments (air and dust, soil, water, sediments, and plants) as well as bees and apicultural products, food and beverages, and the exposure of invertebrates and vertebrates to such contaminants. Finally, we review new publications on remediation of neonicotinoids and fipronil, especially in water systems. Conclusions of the previous WIA in 2015 are reinforced; neonicotinoids and fipronil represent a major threat worldwide for biodiversity, ecosystems, and all the services the latter provide.

Reducing toxicity and antimicrobial activity of a pesticide mixture via photo-Fenton in different aqueous matrices using iron complexes

This is the first study to investigate ethylenediamine-N,N'-disuccinic acid (EDDS)/photo-Fenton process to polish real wastewater containing pesticides for possible water reuse. To this end, simultaneous degradation of pesticides ametrine, atrazine, imidacloprid and tebuthiuron was evaluated in distilled water (DW) and in sewage treatment plant (STP) effluent at initial pH 6.0. Several operational parameters (Fe³⁺-EDDS concentration, Fe³⁺-EDDS molar ratio, EDDS addition patterns and radiation source) were evaluated. 80-98% removal of target pesticides were obtained in DW using 30 μmol L^-1 of Fe³⁺-EDDS with a molar ratio of 1:2 (300 μmol L^-1 of H₂O₂). In addition, the proposed Fe³⁺-EDDS photo-Fenton at pH 6 was more efficient than classic photo-Fenton at pH 2.7 (30-84% removal). Experiments conducted in the presence of radical trapping agents (2-propanol or chloroform) revealed that HO^• was the most active radical during treatment. Matrix composition strongly affected the degradation of target pesticides as a six-fold higher concentration of reagents (180 μmol L^-1 of Fe³⁺-EDDS and 1800 μmol L^-1 of H₂O₂) was needed to reach the same efficiency in STP compared to DW. Even so, first order rate constants corresponding to the degradation of pesticides in DW (k = 0.098-0.85 min^-1) were nearly two-fold higher than in STP (k = 0.079-0.49 min^-1) under the same radiation source (black-light or solar radiation). Finally, acute toxicity towards Vibrio fischeri and Drosophila melanogaster flies, and antibacterial activity assessed for Escherichia coli were eliminated after the application of the proposed treatment, thus indicating environmental safety for either discharge or reuse of treated wastewater for crop irrigation in agriculture.

Degradation mechanism of fipronil and its transformation products, matrix effects and toxicity during the solar/photo-Fenton process using ferric citrate complex

This study presents the degradation of fipronil in sewage treatment plant (STP) effluent by photo-Fenton at near neutral pH (pH 6.0) using Fe³⁺/Citrate complex. 83% of fipronil degradation was reached using a molar iron/citrate ratio of 1:3 (192 μmol L^-1 of Fe³⁺/576 μmol L^-1 of citrate). Photo-Fenton reduced the toxicity of treated solutions as according to the survival of Drosophila melanogaster exposed to non-treated and treated samples. Control experiments performed in distilled water using 32 μmol L^-1 of Fe³⁺/96 μmol L^-1 of citrate achieved 98% of fipronil degradation within 100 kJ m^-2 (UV-A radiation, k = 30 × 10^-3 kJ^-1 m² and t_1/2 = 23 kJ m^-2), thus indicating that fipronil degradation is impaired by natural organic matter and inorganic ions present in STP effluent. Degradation was faster under solar radiation, as the same efficiency (98%) was obtained after 75 kJ m^-2 (k = 63 × 10^-3 kJ^-1 m² and t_1/2 = 11 kJ m^-2). In addition, pathways of fipronil degradation using Fe³⁺/Citrate under solar and UV-A radiation were investigated and transformation products proposed. Results revealed that the HO^• attack occurred preferentially in the pyrazole ring. Eight transformation products were identified by UHPLC-Q-TOF-MS and four are unprecedented in the literature. Control experiments in distilled water demonstrated that toxicity reduction is related to fipronil degradation and that transformation products are less toxic than fipronil. Furthermore, toxicity of STP fortified with fipronil was reduced after photo-Fenton. These results demonstrate the feasibility of applying this process using Fe³⁺/Citrate complex for fipronil degradation in a real matrix.

Efficient degradation of Fipronil in water by microwave-induced argon plasma: Mechanism and degradation pathways

Fipronil and its metabolites are potentially harmful to the ecological environment and have chronic neurotoxic effects, which makes it to be classified as class C carcinogens. Fipronil has been banned from agricultural use in China since 2009, but its residue remains in the environment. Therefore, an efficient and economical method is urgently needed to degrade fipronil residues in the environment. Herein, the degradation of fipronil in water solution using argon microwave-induced plasma (MIP) system was studied and a plausible reaction pathway was proposed in combination with Density Functional Theory (DFT) calculations. The degradation of fipronil by MIP system was optimized in terms of input power, plasma-sample distance, initial concentration and gas flow rate. After short time MIP treatment with an input power of 150 W, as high as 85.62% degradation efficiency was achieved for the fipronil at concentration of 20 mg·L^--1 under the optimized conditions, and the corresponding energy efficiency was 1334.8 mg·kwh^-1. Optical emission spectrometry (OES) was employed to characterize the distribution and intensity of OH, H and O species which play key roles in the degradation of fipronil by plasma, and it revealed that the degradation reaction mainly occurs at gas-liquid interface where the highest intensity of OH, H and O species was observed. High resolution mass spectrometric analysis in combination quantum chemical calculations indicate that a wide diversity of reaction processes occurred for fipronil degradation under MIP treatment, involving oxidation or reduction, nitro reduction, oxidative dichlorination, reductive dichlorination, hydration, dehydration and thiourea to urea. The possible degradation mechanism and pathways were proposed based on the degrading species identified by high resolution Mass Spectrometry (HRMS) and the thermodynamic profiles.

Enhancement of fipronil degradation with eliminating its toxicity in a microbial fuel cell and the catabolic versatility of anodic biofilm

The degradation of fipronil was investigated in microbial fuel cells (MFCs). Almost 79% of 30 mg/L fipronil was rapidly degraded within 12 h by MFC biofilm. Based on the constructed quadratic polynomial model, a maximum fipronil degradation rate of 94.22% could be theoretically achieved at pH of 7.01, 33.39 °C, and the initial fipronil concentration 74 mg/L after incubation for 72 h. The high acute toxicity of fipronil toward zebrafish was largely eliminated after degradation by the MFC. In addition, the MFC biofilm showed catabolic versatility to 4-chloronitrobenzene, sulfanilamide, fluoroglycofen, and azoxystrobin. The microbial community analysis revealed that the functional bacteria Sphaerochaeta, Pseudomonas, Azospirillum, Azoarcus, and Chryseobacterium were major predominant bacteria in the anodic biofilm. Therefore, the MFC offers a promising approach in treating the environmental contaminants due to its abilities of energy capture from waste substances and catabolic versatility to different organic compounds.

Treatment of real dairy wastewater by electrolysis and photo-assisted electrolysis in presence of chlorides

The efficiency of electrolysis (EC/Cl₂) and photo-assisted electrolysis (EC/UV/Cl₂) methods, in the presence of chloride, for the abatement of real dairy waste from a producer in the Triangulo Mineiro region of Brazil, was evaluated. A complete 2³ factorial design was performed for the variables time, pH and current. After determining the ideal pH, a Central Compound Design (CCD) was performed, where the applied current (533.42 mA) and treatment time (60.45 minutes) were maximized. The effluent was subsequently submitted to prolonged EC/Cl₂ and EC/UV/Cl₂ treatment in order to evaluate the behaviour of specific environmental parameters over time. The EC/UV/Cl₂ method was more efficient than simple EC/Cl₂ treatment. The EC/UV/Cl₂ method resulted in a reduction of all environmental parameters investigated to levels within legal standards for effluent discharge. A relatively low cost of treatment is obtained with Energy per Order (E_EO) values of 0.89 and 1.22 kWh m^-3 order^-1 for the EC/UV/Cl₂ and EC/Cl₂ treatments, respectively. The electrochemical production of free chlorine species followed by subsequent photolysis and production of radical species can convert a simple electrochemical process into an advanced oxidation process (AOP).

Multi-compartmental toxicokinetic modeling of fipronil in tilapia: Accumulation, biotransformation and elimination

Bioaccumulation and biotransformation are critical processes modifying toxicity of easily metabolizable chemicals to aquatic organisms. In this study, tissue-specific accumulation, biotransformation and elimination of a current-use pesticide fipronil in tilapia (Oreochromis niloticus) were quantified by combining in vivo measurements and a newly developed multi-compartmental toxicokinetic model. Waterborne fipronil was taken up via gills and metabolized rapidly and solely to fipronil sulfone. Significant decrease of fipronil residues in liver and intestine during exposure period strongly suggested the induction of metabolism in these two organs. Significant transport of fipronil and fipronil sulfone in the liver-bile-intestine system implied that hepatobiliary excretion and enterohepatic re-absorption played important roles in fipronil metabolism and system circulation of the parent compound and the metabolite. The multi-compartmental model quantitatively described the highly dynamic inter-compartmental transport and rapid branchial clearance of fipronil in fish. Modeling results also suggested that uptake and biotransformation were the stronger driving forces for the inter-compartmental transport of fipronil in fish than the inherent partitioning capacity. Overall, our findings highlight the importance of biotransformation on internal disposition of fipronil in fish, which helps to improve aquatic toxicity assessment of this pesticide.

Evaluation of the effectiveness of red mud-supported catalysts in combination with ozone and TiO2 in the treatment of solution containing benzene, toluene, and xylene

Ozone and a Fe²⁺/TiO₂-based catalyst were examined in the degradation of a synthetic solution of benzene toluene and xylene (BTX) in an advanced oxidation process (AOP). The catalyst beads were made from the slurry waste of aluminum production process, by inserting the TiO₂ content and subsequent calcination. The reduction of the BTX concentration load was monitored by the reduction of chemical oxygen demand (COD) and BTX concentration. Different levels were used on factors: pH, time of treatment, initial concentration of BTX, and percentage of TiO₂. The process was conducted in a bubble column reactor with the insertion of catalyst beads. A response surface methodology technique (CCD) was used to build a model based on COD reduction results. The model was optimized using the normal-boundary intersection (NBI) algorithm to maximize COD reduction and minimize the variance attributed to the process. Optimization led to COD reductions of 80% in 2 h of experiment. Correlation analysis of coefficient models from experimental data R²_adj was 0.9966, showing a good fit of model data. In the optimized conditions, the possible increase of the biodegradability ratio of the BTX solution, through the biochemical oxygen demand (BOD) and COD, was also analyzed. Under pre-treatment conditions, the BOD/COD ratio was 0.13. After the treatment, it increased to 0.56. Graphical abstract ᅟ.

Vibrio fischeri bioluminescence inhibition assay for ecotoxicity assessment: A review

Vibrio fischeri bioluminescence inhibition bioassay (VFBIA) has been widely applied for the monitoring of toxicity on account of multiple advantages encompassing shorter test duration, sensitive, cost-effective and ease of operation. Moreover, this bioassay found to be equally applicable to all types of matrices (organic & inorganic compounds, metals, wastewater, river water, sewage sludge, landfill leachate, herbicides, treated wastewater etc.) for toxicity monitoring. This review highlights the apparent significance of Vibrio fischeri bioluminescence inhibition assay for ecotoxicological screening and evaluation of diverse chemical substances toxicity profile. The biochemical and genetic basis of the bioluminescence assay and its regulatory mechanism have been concisely discussed. The basic test protocol with ongoing improvements, widespread applications, typical advantages and probable limitations of the assay have been overviewed. The sensitivity of VFBIA and toxicity bioassays has also been compared.

Metal-free virucidal effects induced by g-C3N4 under visible light irradiation: Statistical analysis and parameter optimization

Waterborne viruses with a low infectious dose and a high pathogenic potential pose a serious risk for humans all over the world, calling for a cost-effective and environmentally-friendly inactivation method. Optimizing operational parameters during the disinfection process is a facile and efficient way to achieve the satisfactory viral inactivation efficiency. Here, the antiviral effects of a metal-free visible-light-driven graphitic carbon nitride (g-C₃N₄) photocatalyst were optimized by varying operating parameters with response surface methodology (RSM). Twenty sets of viral inactivation experiments were performed by changing three operating parameters, namely light intensity, photocatalyst loading and reaction temperature, at five levels. According to the experimental data, a semi-empirical model was developed with a high accuracy (determination coefficient R² = 0.9908) and then applied to predict the final inactivation efficiency of MS2 (a model virus) after 180 min exposure to the photocatalyst and visible light illumination. The corresponding optimal values were found to be 199.80 mW/cm², 135.40 mg/L and 24.05 °C for light intensity, photocatalyst loading and reaction temperature, respectively. Under the optimized conditions, 8 log PFU/mL of viruses could be completely inactivated by g-C₃N₄ without regrowth within 240 min visible light irradiation. Our study provides not only an extended application of RSM in photocatalytic viral inactivation but also a green and effective method for water disinfection.

Normal boundary intersection applied as multivariate and multiobjective optimization in the treatment of amoxicillin synthetic solution

Amoxicillin is a useful antibiotic to combat bacterial infections. However, this drug can cause serious problems when discarded in waterways due to its great bioaccumulation potential. This compound can be treated via advanced oxidation processes (AOPs), which are capable of converting amoxicillin into carbon dioxide and water. In this context, the use of ozone as an oxidizer has excelled in amoxicillin degradation. This paper aims at treating a synthetic solution of amoxicillin (0.1 g L^-1) in a reactor with ozone bubbling. A Design of Experiment (DoE) with a response surface known as Central Composite Design (CCD) was used to optimize the treatment process. In addition, a Normal Boundary Intersection (NBI) method was used in the construction of a Pareto boundary chart. Results after 1-h treatment showed a reduction of 53% of the initial organic matter from a designed model using factors, such as pH, ozone generator power, and O₃ flow. A model was built from the CCD with score of 0.9929. Thus, the model was able to represent the real scenario with confidence.

Integrating coagulation-flocculation and UV-C or H2O2/UV-C as alternatives for pre- or complete treatment of biodiesel effluents

The feasibility of biodiesel effluent treatment combining coagulation-flocculation with a photolytic process was evaluated, being the photolytic process involving the irradiation of the effluent by UV-C, or by UV-C irradiation with simultaneous addition of H₂O₂ (H₂O₂/UV-C). The coagulation-flocculation was performed at the natural pH of the effluent (pH 2.9) using different Fe³⁺ salts (chloride, nitrate and sulfate) at different concentrations (0.25, 0.50 and 1.0 mmol L^-1) of the counterions. The best results were achieved using 0.50 mmol L^-1 Fe(NO₃)₃. Following, the degradation of the organic load and toxicity reduction of the pre-treated effluent by UV-C irradiation was evaluated. The H₂O₂/UV-C process showed to be advantageous, mainly when multiple additions of H₂O₂ were used during the course of the reaction. Additionally, the influence of the initial pH on the degradation was also evaluated. A high level of mineralization (94%) was achieved after 6 h of irradiation concomitantly with multiple additions of 2,000 mg L^-1 H₂O₂, and with the effluent at the natural pH. Thus, using coagulation-flocculation followed by the H₂O₂/UV-C process, it was possible to achieve a favourable condition for reuse of the pre-treated effluent, since, in addition to the significant reduction of the organic load, the final DBO₅ (<120 mg L^-1) and oils & fats (<50 mg L^-1) are below the limits established by the Brazilian legislation. Furthermore, a reduction of 78% of acute toxicity to V. fischeri (from 89% to 20%) was reached. The results suggest, therefore, that this process is a viable option for treatment of this kind of effluent.