Green technological approach to synthesis hydrophobic stable crystalline calcite particles with one-pot synthesis for oil-water separation during oil spill cleanup

Rationally designed calcium carbonate multifunctional trap for contaminants adsorption

Adsorption technology has been widely developed to control environmental pollution, which plays an important role in the sustainable development of modern society. Calcium carbonate (CaCO3) is characterized by its flexible pore design and functional group modification, which meet the high capacity and targeting requirements of adsorption. Therefore, its charm of "small materials for great use" makes it a suitable candidate for adsorption. Firstly, we comprehensively review the research progress of controlled synthesis and surface modification of CaCO3, and its application for adsorbing contaminants from water and air. Then, we systematically examine the structure-effect relationship between CaCO3 adsorbents and contaminants, while also intrinsic mechanism of remarkable capacity and targeted adsorption. Finally, from the perspective of material design and engineering application, we offer insightful discussion on the prospects and challenges of calcium carbonate adsorbents, providing a valuable reference for the further research in this field.

Facile Preparation of Durable and Eco-Friendly Superhydrophobic Filter with Self-Healing Ability for Efficient Oil/Water Separation

The superhydrophobic feature is highly desirable for oil/water separation (OWS) operation to achieve excellent separation efficiency. However, using hazardous materials in fabricating superhydrophobic surfaces is always the main concern. Herein, superhydrophobic filters were prepared via an eco-friendly approach by anchoring silica particles (SiO2) onto the cotton fabric surface, followed by surface coating using natural material-myristic acid via a dip coating method. Tetraethyl orthosilicate (TEOS) was used in the synthesis of SiO2 particles from the silica sol. In addition, the impact of the drying temperature on the wettability of the superhydrophobic filter was investigated. Moreover, the pristine cotton fabric and as-prepared superhydrophobic cotton filters were characterised based on Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX) and contact angle (CA) measurement. The superhydrophobic cotton filter was used to perform OWS using an oil-water mixture containing either chloroform, hexane, toluene, xylene or dichloroethane. The separation efficiency of the OWS using the superhydrophobic filter was as high as 99.9%. Moreover, the superhydrophobic fabric filter also demonstrated excellent durability, chemical stability, self-healing ability and reusability.

Marine oil spill remediation by Candelilla wax modified coal fly ash cenospheres

Biodegradable candelilla wax (CW) was creatively used for hydrophobic modification of coal fly ash cenospheres (FACs), a waste product from thermal power plants, and a new spherical hollow particulate adsorbent with fast oil adsorption rate and easy agglomeration was prepared. CW was confirmed to physically coat FACs and the optimum mass of wax added to 3 g of FACs was 0.05 g. From a series of batch scale experiments, CW-FACs were found to adsorb oil, reaching adsorption efficiency of 80.6% within 10 s, and aggregate into floating clumps which were easily removed from the water's surface. The oil adsorption efficiency was highly dependent on hydrophobicity of the used adsorbent, the adsorption of Venezuela oil onto CW-FACs was found to be a homogenous monolayer, and the capacity and intensity of the adsorption decreased as temperature increased from 10 to 40 °C. The Langmuir isotherm model was the best fit, with the maximum adsorption capacity achieved at 649.38 mg/g. CW-FACs were also found to be highly stable in concentrated acid, alkaline and salt solutions, as well as for spills of different oil products. Furthermore, the retention rate of the oil adsorption capacity of the CW-FACs after 6 cycles of adsorption-extraction was as high as 93.2%. Therefore, CW-FACs can be widely used, easily recycled, and reused for marine oil spill remediation, which is also a good alternative disposal solution for FACs.

Silicon carbide microfiltration membranes for oil-water separation: Pore structure-dependent wettability matters

Both the pore size and surface properties of silicon carbide (SiC) membranes are demonstrated to significantly affect their separation efficiency when used for oily water treatment. However, the potential influences of open porosity together with the pore size of SiC membranes on their surface properties and oil-water separation performance have rarely been investigated. In this work, porous SiC ceramic membranes with tunable open porosity and pore size were purposely prepared and selected to systematically study the effect of pore structure-dependent wettability on the oil-water separation performance. The measured pure water flux of selected membranes as a function of open porosity (34-48%) and pore size (0.43-0.67 μm) was well-fitted by using a modified H-P equation. Interestingly, the hydrophilicity of SiC membranes was improved with the increase in open porosity and pore size, as evidenced by the gradually decreased dynamic water contact angle and underwater adhesion of oil droplets. Further, the open porosity of SiC membranes was found to contribute more to the improved surface wettability. As a result, the stable flux of SiC membranes in oil-in-water (O/W) emulsions was increased by 24% with the increased open porosity while the oil rejection rate remained above 90%. This work quantitatively reveals the contributions of the pore structure to the surface wettability of ceramic membranes, and thus provides an effective pathway to improve their performance in oil-water separation.

Surface treated Phoenix sylvestris for bioadsorption of oil from aqueous solution: Isotherms and kinetic studies

Biosorption is a versatile technique of removing the oil spill - one of the major toxicants that causes water pollution, which threatens the ecological balance of the aquatic ecosystem. The proposed research aims in developing a viable adsorbent from discarded agricultural waste, Phoenix sylvestris, which was surface altered, assessed and utilised as a biosorbent for the effective removal of diesel from aqueous solution in batch adsorption trials. Waste palm leaves, Phoenix sylvestris (RPS)was physically (PMPS) and chemically modified (CMPS) to adsorb diesel in the emulsion. The synthesised materials were characterised by FTIR, SEM, and EDS, confirming a well-defined microporous structure consisting of ionisable groups. The studies indicated optimised conditions of 10 g, 4.5 g and 2 g of RPS, PMPS and CMPS respectively at 303K for an optimised adsorption time of 60 min. Freundlich isotherm agreed well with experimental data, and the kinetic mechanism claimed better results with RPS, PMPS and CMPS for Pseudo first-order model. The adsorbents could be reused five times without much loss of efficiency. From the performed studies, it can be inferred that good adsorption capacities at optimised conditions followed the order of CMPS > PMPS > RPS. Thermodynamic analysis proved the feasibility of such biosorption with exothermic nature predicting spontaneous attraction of oil components to the surface of PMPS and CMPS. Moreover, the density of the CMPS layer rendered proven results for such biosorption displaying a hyperbolic dependency assuring its efficacy. Hence, it can be concluded that the prepared adsorbent from Phoenix sylvestris, an agricultural waste, possess good adsorptive properties.

Biosorbent with superhydrophobicity and superoleophilicity for spilled oil removal

The development of efficient and sustainable sorbents for emergent oil cleanup has attracted tremendous attention. In this study, the feasibility of enzymatic grafting of octadecylamine (ODA) on corn stalk pith (CSP) by laccase-TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) treatment for enhanced oil-water separation was investigated. The dynamic contact angle tests suggest that the modified CSP (LCSP) had higher hydrophobicity (WCA, 157.2˚) and lipophilicity (OCA, 0˚) than the CSP did. In addition, the introduction of ODA onto the surface of modified CSP was verified by a variety of characterization techniques including SEM, FT-IR, and XPS. Compared with the control, laccase-TEMPO treatment of CSP coupled with octadecylamine grafting greatly improved the oil sorption capacity from 13.24 g/g to 44.25 g/g, while substantially reduced the water sorption capacity from 15.52 g/g to 2.76 g/g. LCSP has fast kinetic (sorption equilibrium reached before 60 min) and high fits to the pseudo-second-order kinetic model. The results obtained in this study reveal the feasibility of using Laccase-TEMPO treatment to graft the ODA onto the surface of CSP, thereby enhancing the rate and capacity of oil separation from oily water. The method and sorbent developed in this study hold promise for green, simple and cost-effective oil cleanup during oil spillage emergency events.

One-pot fabrication of sludge-derived magnetic Fe,N-codoped carbon catalysts for peroxymonosulfate-induced elimination of phenolic contaminants

The use of waste sludge as a precursor of catalysts for environmental applications has been encouraged during the past few years. In this study, a series of magnetic Fe,N-codoped carbon catalysts (UBC-x) were successfully prepared by a facile one-pot pyrolysis method using Fe-rich sludge and N-rich urea as the raw materials. By carefully controlling the mass ratio of urea/dry sludge (x = 0-3), a significant amount of N (1-10 mass%) were incorporated, and the UBC-x catalysts, especially UBC-0.5 and UBC-0.75, could be imparted with high catalytic activity, convenient magnetic separation and high recycle stability. Phenolic contaminants like phenol and bisphenol A (BPA) could be nearly completely removed through peroxymonosulfate (PMS)-induced degradation by using UBC-x as the catalysts under a wide pH range (2-11) and with the co-existence of water constituents (chloride Cl^- and sodium humate NaH, 0-50 mM). Among the several reactive oxidative species (ROS), singlet oxygen (¹O₂) was deemed as the main reactive species responsible for BPA degradation. Both Fe and N active sites contributed to the high catalytic activity of UBC-x, and their coordination made the catalysts rather stable with no significant Fe leaching under a wide pH range. Therefore, after an easy magnetic separation, the UBC-x could be recycled and reused efficiently in another BPA removal cycle. The as-synthesized magnetic Fe,N-codoped carbon catalysts provided a new route for sludge reutilization and showed potential applications in wastewater treatment.

Variation of Microbial Diversity in Catastrophic Oil Spill Area in Marine Ecosystem and Hydrocarbon Degradation of UCMs (Unresolved Complex Mixtures) by Marine Indigenous Bacteria

The study targeted an assessment of microbial diversity during oil spill in the marine ecosystem (Kaohsiung port, Taiwan) and screened dominant indigenous bacteria for oil degradation, as well as UCM weathering. DO was detected lower and TDS/conductivity was observed higher in oil-spilled area, compared to the control, where a significant correlation (R² = 1; P < 0.0001) was noticed between DO and TDS. The relative abundance (RA) of microbial taxa and diversities (> 90% similarity by NGS) were found higher in the boundary region of spilled-oily-water (site B) compared to the control (site C) and center of the oil spill area (site A) (B_RA/diversity > C_RA/diversity > A_RA/diversity). The isolated indigenous bacteria, such as Staphylococcus saprophyticus (CYCTW1), Staphylococcus saprophyticus (CYCTW2), and Bacillus megaterium (CYCTW3) degraded the C₁₀-C₃₀ including UCM of oil, where Bacillus sp. are exhibited more efficient, which are applicable for environmental cleanup of the oil spill area. Thus, the marine microbial diversity changes due to oil spill and the marine microbial community play an important role to biodegrade the oil, besides restoring the catastrophic disorders through changing their diversity by ecological selection and adaptation process.

One-pot fabrication of reusable hybrid sorbents for quick removal of oils from wastewater

The leaking of harmful organic liquids into water resources has had hazardous impacts on living organisms. Herein, we demonstrated the fabrication of hybrid sorbents using s-PPG and organosilane cross-linker. The final product exhibited high, quick absorption capacity, great reusability and excellent oil separation performance from wastewater. They also selectively absorb different oils from the bottom and surface of water without any capacity change, even in harsh conditions like wavy and sub-zero water environment. Experimental results demonstrated that the obtained sorbents are efficient to successfully remove oil from water surface, even at harsh conditions, and float on the water surface before and after oil sorption without any capacity loss and structural change. Simple preparation by avoiding time consuming multistep process, initiator, solvent, activator free reaction medium, high and selective sorption characteristics and great reusability could make these sorbents a promising candidate for the cleaning of water from harmful organic liquids, by absorbing them.