2D kaolin ultrafiltration membrane with ultrahigh flux for water purification

Enhancing Stability of Tannic Acid-FeIII Nanofiltration Membrane for Water Treatment: Intercoordination by Metal-Organic Framework

Tannic acid (TA)-Fe^III nanofiltration (NF) membrane has been demonstrated to possess more favorable removal of trace organic contaminants (TrOCs) over the conventional polyamide NF membrane. However, the drawback of acid instability severely hinders the practical application of TA-Fe^III NF membrane in the treatment of (weak) acidic wastewater containing TrOCs (e.g., pharmaceutical wastewater, surface water, and drinking water). Herein, we introduced the MIL-101(Cr) nanoparticle, a kind of metal-organic framework (MOF), into the TA-Fe^III selective layer to enhance the membrane acid stability. The acid-tolerance parameter of MIL-101(Cr)-stabilized TA-Fe^III membrane (TA-Fe^III-MOF membrane, 12,000 ppm/s^-1) was two orders of magnitude larger than that of the TA-Fe^III membrane (50 ppm/s^-1), and the TA-Fe^III-MOF membrane can withstand acid treatment at pH = 4 for more than 30 days. Meanwhile, the TA-Fe^III-MOF membrane displayed increased water permeance from 9.5 to 12.7 L/(m²·h·bar) after the MOF addition, without compromising the selectivity. The enhanced acid stability for the TA-Fe^III-MOF membrane was ascribed to an intercoordination mechanism, where Fe^III centers (from TA-Fe^III complex) coordinated with -COOH groups (from terephthalic acid of MOF) and Cr^III centers (from MOF) coordinated with -OH groups (from TA of TA-Fe^III complex), which was verified by the density functional theory calculation. This study highlights a new approach for the development of a TA-Fe^III-based NF membrane with markedly enhanced acid stability, which is important for its real application in wastewater treatment and water reuse.

Beneficial role of pre- and post-ozonation in a low rate biofiltration-ultrafiltration process treating reclaimed water

Previous studies have shown that the combination of biological and ozone oxidation processes can achieve a greater performance in treating natural surface water than each process individually. In this work, we designed and tested an ozonation-gravity-driven up-flow slow rate (0.01 m/h) biofiltration-ozonation (O₃-GUSB-O₃) process for the pre-treatment of reclaimed water prior to ultrafiltration (UF), with the aim of producing high quality drinking water and a significantly reduced degree of UF fouling. Results showed that O₃ coupled with GUSB can effectively remove aromatic compounds (∼ 84.8%), dissolved organic carbon (DOC, ∼ 83.4%), and biopolymers in surface water. In addition, post-ozonation greatly contributed to the reduction of the UF membrane fouling (∼ 6 times greater flux). With regard to the disinfection by-product formation potential (DBPFP) of the final treated water, both trihalomethane formation potential (THMFP) and haloacetic acid formation potential (HAAFP) were greatly reduced (86.4% and 84.8% for THMs and HAAs, respectively). The relationship between DBPFP and various spectral indexes revealed that aromatic compounds and amino acids were more likely to generate DBPs during the disinfection stage. Among these, humic substances were more likely to generate THMs, while low molecular weight carboxylate and carbonyl organic compounds were associated with the generation of HAAs. Moreover, the dosage of O₃ during the post-ozonation stage was found to influence directly the generation of DBPs. Overall, this study has conducted a detailed evaluation of a novel multi-ozone biofilter UF process for treating surface water, and the results provide a valuable basis for subsequent studies at larger scale to demonstrate the potential of the treatment process for practical applications.

Fabrication of Thin Film Composite Membranes on Nanozeolite Modified Support Layer for Tailored Nanofiltration Performance

Thin-film composite (TFC) structure has been widely employed in polymeric membrane fabrication to achieve superior performance for desalination and water treatment. In particular, TFC membranes with a thin active polyamide (PA) selective layer are proven to offer improved permeability without compromising salt rejection. Several modifications to TFCs have been proposed over the years to enhance their performance by altering the selective, intermediate, or support layer. This study proposes the modification of the membrane support using nanozeolites prepared by a unique ball milling technique for tailoring the nanofiltration performance. TFC membranes were fabricated by the interfacial polymerization of Piperazine (PIP) and 1,3,5-Benzenetricarbonyl trichloride (TMC) on Polysulfone (PSf) supports modified with nanozeolites. The nanozeolite concentration in the casting solution varied from 0 to 0.2%. Supports prepared with different nanozeolite concentrations resulted in varied hydrophilicity, porosity, and permeability. Results showed that optimum membrane performance was obtained for supports modified with 0.1% nanozeolites where pure water permeance of 17.1 ± 2.1 Lm^-2 h^-1 bar^-1 was observed with a salt rejection of 11.47%, 33.84%, 94%, and 95.1% for NaCl, MgCl₂, MgSO_4, and Na₂SO₄ respectively.

Natural and recycled materials for sustainable membrane modification: Recent trends and prospects

Despite water being critical for human survival, its uneven distribution, and exposure to countless sources of pollution make water shortages increasingly urgent. Membrane technology offers an efficient solution for alleviating the water shortage impact. The selectivity and permeability of membranes can be improved by incorporating additives of different nature and size scales. However, with the vast debate about the environmental and economic feasibility of the common nanoscale materials in water treatment applications, we can infer that there is a long way before the first industrial nanocomposite membrane is commercialized. This stumbling block has motivated the scientific community to search for alternative modification routes and/or materials with sustainable features. Herein, we present a pragmatic review merging the concept of sustainability, nanotechnology, and membrane technology through the application of natural additives (e.g., Clays, Arabic Gum, zeolite, lignin, Aquaporin), recycled additives (e.g., Biochar, fly ash), and recycled waste (e.g., Polyethylene Terephthalate, recycled polystyrene) for polymeric membrane synthesis and modification. Imparted features on polymeric membranes, induced by the presence of sustainable natural and waste-based materials, are scrutinized. In addition, the strategies harnessed to eliminate the hurdles associated with the application of these nano and micro size additives for composite membranes modification are elaborated. The expanding research efforts devoted recently to membrane sustainability and the prospects for these materials are discussed. The findings of the investigations reported in this work indicate that the application of natural and waste-based additives for composite membrane fabrication/modification is a nascent research area that deserves the attention of both research and industry.

Towards microplastics contribution for membrane biofouling and disinfection by-products precursors: The effect on microbes

Public awareness of plastic pollution and its impact on the ecosystem has increased rapidly. The microplastics in raw waters and their removal during drinking water treatment is receiving growing attention, but the impact on the efficiency of ultrafiltration has not been examined previously, especially in regard to the formation potential of disinfection by-products (DBPs-FP) in effluent water. In this study, two bench-scale continuous-flow ultrafiltration systems, with and without microplastics, were operated to examine the effect of microplastics on ultrafiltration. Results showed that the microplastics not only increased microbial growth, but also affected the microbial community (e.g. families Xanthobacteraceae, Sphingomonadaceae, Leptolyngbyaceae), which can promote the production of extracellular polymeric substances and nitrogen fixation, causing rapid membrane fouling. The formation potential of THM (TCM and BDCM) and N-DBP (TCNM) species in UF permeate increased with the presence of microplastics, due to changes in water quality. Statistical analysis indicated that tyrosine-like components (C3), ammonium (NH₄⁺-N) and tryptophan-like component (C1) can be used as indicators of the DBPs-FP. This study provides new insights into the relationship between microplastics, membrane biofouling and DBPs-FP, and the potential adverse impact of microplastics on drinking water treatment.

The nitrogen-doped multi-walled carbon nanotubes modified membrane activated peroxymonosulfate for enhanced degradation of organics and membrane fouling mitigation in natural waters treatment

The synthesized catalyst nitrogen-doped multi-walled carbon nanotubes (N-MWCNTs) were introduced into membrane technology for peroxymonosulfate (PMS) activation. The enhanced permeability of the N-MWCNTs-modified membrane might be attributed to the increase in hydrophilicity and membrane porosity. The catalytic degradation and membrane filtration performance for the N-MWCNTs-modified membrane/PMS system in treating different types of natural waters were evaluated. The removal of phenol by the N-MWCNTs-modified membrane was 83.67% in 2 min, which was greater than the phenol removal by the virgin membrane (3.39%) and N-MWCNT powder (41.42%), respectively. Moreover, the resultant membrane coupled with PMS activation exhibited outstanding removal effects on the fluorescent organics in the secondary effluent and Songhua River water. The combination effectively reduced the total membrane fouling caused by the secondary effluent, Songhua River water, and three typical model organics by 28.19-61.98%. Electron paramagnetic resonance and classical quenching tests presented that the active species (SO4·-, ·OH, and 1O2) and other non-radical processes generated by N-MWCNTs activated PMS decreased the foulants deposition on the membrane surface. Meanwhile, the membrane interception accelerated the aggregation of pollutants and PMS towards the membrane surface through applied pressure, facilitating their mass transfer to the N-MWCNTs surface for the catalysis exerted more effectively. This study demonstrated the potential application of the coupling of N-MWCNTs catalytic oxidation and the UF, which offers a promising prospect to improve the permeate quality and simultaneously overcome the membrane fouling barriers.

Emerging graphitic carbon nitride-based membranes for water purification

Membrane separation is a promising technology that can effectively remove various existing contaminants from water with low energy consumption and small carbon footprint. The critical issue of membrane technology development is to obtain a low-cost, stable, tunable and multifunctional material for membrane fabrication. Graphitic carbon nitride (g-C₃N₄) has emerged as a promising membrane material, owing to the unique structure characteristics and outstanding catalytic activity. This review paper outlined the advanced material strategies used to regulate the molecule structure of g-C₃N₄ for membrane separation. The presentative progresses on the applications of g-C₃N₄-based membranes for water purification have been elaborated. Essentially, we highlighted the innovation integration of physical separation, catalysis and energy conversion during water purification, which was of great importance for the sustainability of water treatment techniques. Finally, the continuing challenges of g-C₃N₄-based membranes and the possible breakthrough directions in the future research was prospected.

Iron-nickel bimetallic metal-organic frameworks as bifunctional Fenton-like catalysts for enhanced adsorption and degradation of organic contaminants under visible light: Kinetics and mechanistic studies

Iron-nickel bimetallic organic frameworks (FeNi_X-BDC, H₂BDC: terephthalic acid) were developed as bifunctional materials for adsorption and photo-Fenton degradation of organic dyes with different charge properties. Significantly enhanced adsorption capacity of FeNi_1/15-BDC towards methylene blue (MB) and methyl orange (MO) was achieved, 5.3 and 2.6 times higher than that of pristine Fe-BDC, which was attributed to enlarged specific surface area and pore volume and the decreased surface charges induced by Ni doping. The adsorption kinetics demonstrated that chemisorption was dominant and intra-particle diffusion was the rate-controlling step. Two-stage degradation including slow induction stage and rapid oxidation stage fitted with pseudo-zero-order kinetics well. The increased rate constants (2.472 vs. 1.188 min^-1 for MB; 0.616 vs. 0.421 min^-1 for MO) in the induction stage as well as the superior removal capability by asynchronism relative to synchronism jointly corroborating the improved adsorption performance was favor for subsequent degradation. Notably, this heterogeneous system not only exhibited obvious advantages like wider pH working range (3-9), better stability and reusability of catalysts, but also achieved the dual objectives of in-situ decontamination and adsorbent regeneration. The coupling of adsorption and degradation along with synergism between photocatalysis and Fenton-like process are responsible for the reinforced removal of organic contaminants.

Iron Molybdate Fe2(MoO4)3 Nanoparticles: Efficient Sorbent for Methylene Blue Dye Removal from Aqueous Solutions

The present study investigated iron molybdate (Fe₂(MoO₄)₃), synthesized via a simple method, as a nanosorbent for methylene blue (MB) dye removal from aqueous solutions. Investigations of the effects of several parameters like contact time, adsorbent dose, initial dye concentration, temperature and pH were carried out. The results showed that MB removal was affected, significantly, by adsorbent dose and pH. Interestingly, lower values of adsorbent dose resulted in the removal of higher amounts of MB. At the optimum pH, the removal efficiency of 99% was gained with an initial MB concentration of ≤60 ppm. The kinetic study specified an excellent correlation of the experimental results with the pseudo-second-order kinetics model. Thermodynamic studies proved a spontaneous, favorable and endothermic removal. The maximum amount of removal capacity of MB dye was 6173 mg/g, which was determined from the Langmuir model. The removal efficiency was shown to be retained after three cycles of reuse, as proven by thermal regeneration tests. The presence and adsorption of the dye onto the Fe₂(MoO₄)₃ nanoparticle surface, as well as the regeneration of the latter, was ascertained by scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). These findings are indicative that the investigated nanosorbent is an excellent candidate for the removal of MB in wastewater.

The hierarchical flower-like MoS2 nanosheets incorporated into PES mixed matrix membranes for enhanced separation performance

Membrane fouling is an issue of concern due to the hydrophobic properties of polyethersulfone (PES) membrane when applied in water treatment. In this work, a facile hydrothermal method was utilized to synthesize hierarchical flower-like structured molybdenum disulfide nanosheets (HF-MoS2 NSs) that then incorporated into PES membranes as composite membranes. We characterized their permeability, the separation performance, the antifouling performance, and the antibacterial activity systematically. Results showed that composite membranes exhibited a better pure water flux (286 LMH/bar) at the HF-MoS₂ NSs content of 0.4 wt%, which was 1.8 times higher than the control membrane. Also, composite PES membranes achieved 98.2% and 96.9% rejection of BSA and HA in comparison with the control PES membrane (87.3%, and 84.5%, respectively). Compare to the control PES membrane, the flux recovery ratio of the composite membrane increased from 69% to 88% for BSA fouling and increased from 84% to 93% for HA fouling. The retention rate for the organic dyes also improved slightly after HF-MoS2 NSs incorporation into the membrane. Additionally, the composite membranes exhibited a relatively high antibacterial activity against E. coli and B. subtilis with antibacterial rates of 67.8% and 82.5%, respectively. In conclusion, HF-MoS2 NSs incorporated composite membranes were shown to have outstanding filtration performance and could be a promising candidate for practical application in water filtration.