Amorphous nickel phosphide as a noble metal-free cathode for electrochemical dechlorination

Regulating Mo-based alloy-oxide active interfaces for efficient alkaline hydrogen evolution assisted by hydrazine oxidation

Improving the efficiency of overall water splitting (OWS) is crucial due to the slow four-electron transfer process in the oxygen evolution reaction (OER). The coupling of the thermodynamically favorable hydrazine oxidation reaction (HzOR) with the hydrogen evolution reaction (HER) significantly boosts hydrogen production. A Ru-decorated MoNi/MoO2 micropillar (Ru-MoNi/MoO2) has been synthesized using a hydrothermal followed by reduction annealing. Benefiting from Ru moderating the active interface of Mo-based alloys/oxides and the unique one-dimensional micropillar morphology. The synthesized Ru-MoNi/MoO2 exhibits outstanding bifunctional activity for HER and HzOR, achieving 10 mA cm-2 at merely -13 mV and -34 mV in 1 M KOH and 1 M KOH + 0.5 M N2H4, respectively. Notably, with Ru-MoNi/MoO2 in a dual-electrode setup, only 0.57 V is needed to achieve 50 mA cm-2, demonstrating good stability and facilitating hydrazine-assisted water splitting (OHzS). This work offers insights into the modulation of alloy/metal oxide active interfaces, contributing to the development of efficient bifunctional catalysts for HER and HzOR.

Electrochemical reductive removal of trichloroacetic acids by a three-dimensional binderless carbon nanotubes/ CoP/Co foam electrode: Performance and mechanism

Numerous chlorinated disinfection by-products (DBPs) are produced during the chlorination disinfection of water. Among them, chloroacetic acids (CAAs) are of great concern due to their potential human carcinogenicity. In this study, effective electrocatalytic dechlorination of trichloroacetic acids (TCAA), a typical CAAs, was achieved in the electrochemical system with the three-dimensional (3D) self-supported CoP on cobalt foam modified by carbon nanotubes (CNT/CoP/CF) as the cathode. At a 10 mA cm-2 current density, 74.5% of TCAA (500 μg L-1) was converted into AA within 100 min. In-situ growth of CoP increased the effective electrochemical surface area of the electrode. Electrodeposited CNT promoted electron transfer from the electrode surface to TCAA. Therefore, the production of surface-adsorbed atomic hydrogen (H*) on CNT/CoP/CF was improved, further resulting in excellent electrochemical dechlorination of TCAA. The dechlorination pathway of TCAA proceeded into acetic acids via direct electronic transfer and H*-mediated reduction on CNT/CoP/CF electrode. Additionally, the electroreduction efficiency of CNT/CoP/CF for TCAA exceeded 81.22% even after 20 cycles. The highly efficient TCAA reduction performance (96.57%) in actual water revealed the potential applicability of CNT/CoP/CF in the complex water matrix. This study demonstrated that the CNT/CoP/CF is a promising non-noble metal cathode to remove chlorinated DBPs in practice.

Effective boosting of halogenated α, β-unsaturated C4-dicarbonyl electrocatalytic hydrodehalogenation by 1 T'-MoS2/Ti3C2T2 (T = O, OH, F) heterojunctions: A theoretical study

Halogenated α, β-unsaturated C4-dicarbonyl (X-BDA), a novel family of high-toxicity ring cleavage products, is produced during the disinfection of phenolic compounds. The technique of electrocatalytic hydrodehalogenation (ECH) is efficient in rupturing carbon-halogen bonds and generating useful chemicals. This study used first principles to examine the ECH reaction mechanism of X-BDA and the subsequent hydrogenation reaction of the toxic derivative BDA over the 1 T'-MoS2/Ti3C2T2 (T = O, OH, F) catalysts. The catalytic activity of Ti3C2T2 (T = O, OH, F) catalysts decreases gradually with -OH, -F, -O functional group. The loading of 1 T'-MoS2 onto the Ti3C2T2 surface improves the stability and selectivity of Ti3C2T2. In particular, 1 T'-MoS2/Ti3C2(OH)2 is most conducive to the ECH reaction of X-BDA via a direct-indirect continuous reduction process. It exhibits excellent removal capability towards Cl-BDA, with decreasing reactivity in the order of the Cl-, Br-, and I-BDA. The material offers a solution to the challenging dechlorination issue. The dehalogenated product BDA can be hydrogenated to produce 1,4-butanedial, 1,4-butanediol, and 1,4-butenediol. Three valuable chemicals can be obtained by exerting an applied potential of - 0.65 V. This work suggests that the formation of heterojunction catalyst may lead to new strategies to improve ECH for environmental remediation applications.

Strong electron coupling of FeP4/Ni2P to boost highly-efficient electrochemical nitrate reduction to ammonia

Electrochemical reduction of contaminated nitrate to ammonia (NRA) opens a new window for mass production of ammonia and the alleviation of energy crises and environmental pollution. However, fabricating effective catalysts for the NRA still faces significant challenges. Herein, a highly-efficient NRA catalyst, FeP4/Ni2P, was successfully constructed. The strong electron coupling at heterointerfaces of FeP4/Ni2P promoted the generation of abundant active hydrogen *H, inhibited the competition of the HER, accelerated the hydrogenation of the NRA. Benefiting from these, the catalyst displays good NRA catalytic activity in the neutral electrolyte, with the NH3 FE of 97.83 ± 0.091 %, NH3 selectivity of 98.67 ± 0.50 %, NH3 yield rate of 0.262 ± 0.01 mmol·h-1·cm-2, and NO3- conversion rate of 93.02 ± 0.14 %. The DFT theoretical calculations demonstrated that the FeP4/Ni2P heterointerfaces played a critical role in shearing the H-OH bonds of water, resulting in generating more active hydrogen as a key NRA hydrogenation source, and hindering the *H dimerization to form H2, enhancing the NH3 selectivity. This work has a certain reference value for designing excellent catalysts for the NRA.

Co-pyrolysis of biomass and polyethylene: Insights into characteristics, kinetic and evolution paths of the reaction process

Investigation on the distribution and mechanism of co-pyrolysis products is vital to the directional control and high-value utilization of agriculture solid wastes. Co-pyrolysis, devolatilization, kinetics characteristics, and evolution paths of corn stalk (CS) and low-density-polyethylene (LDPE) were investigated via thermogravimetric experiments. The co-pyrolysis behaviors could be separated into two stages: firstly, the degradation of CS (150- 400 °C); secondly, the degradation of CS (400- 550 °C). The devolatilization index (DI) increased with the addition of LDPE. Furthermore, a combination of devolatilization chemical analysis with product analysis to analyze the intrinsic mechanism during co-pyrolysis. The results indicated that the yield of alkanes and olefin in gas products increased with the addition of LDPE. Additionally, LDPE pyrolysis maybe abstract hydrogen from CS pyrolysis and evolved into hydrogen, methane, and ethylene. Further, the co-pyrolysis kinetic parameters were computed by using model-free isoconversion methods, which showed promotion of CS pyrolysis and the reduced activation energy. All the activation energy were declined, which indicated a "bidirectional positive effect" during co-pyrolysis. The mean activation energy of P-cellulose (P-CE), P-hemicellulose (P-HM), P-lignin (P-LG), and LDPE decreased by 23.49 %, 12.89 %, 15.36 %, and 27.82 %, respectively. This study further proves the hydrogen donor transfer pathway in the co-pyrolysis process of CS and LDPE, providing theoretical support for the resource utilization of agricultural solid waste.

Enhanced dehalogenation of brominated DBPs by catalyzed electrolysis using Vitamin B12 modified electrodes: Kinetics, mechanisms, and mass balances

Vitamin B₁₂ (VB₁₂) modified electrodes were prepared for the electrocatalytic reductive debromination of tribromoacetic acid (TBAA). Under galvanostatic conditions set as 5 mmol/L VB₁₂ loading, 20 mmol/L Na₂SO₄ as electrolyte, 10.0 mA/cm² current density, pH 3, and 298 K, the degradation efficiency of 200 μg/L TBAA at the VB₁₂ modified electrode could reach 99.9 % after 6 h. The debromination of TBAA followed the first-order kinetic model. The masses of carbon and bromine elements were conserved before and after the reaction, together with the qualitative analysis of the degradation products showed the likely degradation pathways as TBAA→dibromoacetic acid (DBAA)→monobromoacetic acid (MBAA)→acetic acid (AA). ESR detection and quenching experiments confirmed the role of atomic H* in TBAA debromination. In-situ Raman spectroscopy showed that the Co-Br bond was strongly enriched to the electrode surface, accelerating the electron transfer. The H₂O dissociation performance and transition states searching catalyzed by VB₁₂ were calculated by Density Functional Theory (DFT) and proved that the composite electrode can effectively promote atomic H* generation. Material characterization and electrochemical performance tests showed that the VB₁₂ modified electrode had excellent stability and atomic H* catalytic activity. The electrocatalytic debromination of TBAA at VB₁₂ modified electrodes mainly involves two mechanisms, direct reduction by electron transfer and indirect reduction by the strongly reducing atom H*. The results provide an efficient way to achieve safe removal of brominated DBPs from drinking water after chlorination and before human consumption.

Electrocatalytic hydro-dehalogenation of halogenated organic pollutants from wastewater: A critical review

Halogenated organic pollutants are often found in wastewater effluent although it has been usually treated by advanced oxidation processes. Atomic hydrogen (H*)-mediated electrocatalytic dehalogenation, with an outperformed performance for breaking the strong carbon-halogen bonds, is of increasing significance for the efficient removal of halogenated organic compounds from water and wastewater. This review consolidates the recent advances in the electrocatalytic hydro-dehalogenation of toxic halogenated organic pollutants from contaminated water. The effect of the molecular structure (e.g., the number and type of halogens, electron-donating or electron-withdrawing groups) on dehalogenation reactivity is firstly predicted, revealing the nucleophilic properties of the existing halogenated organic pollutants. The specific contribution of the direct electron transfer and atomic hydrogen (H*)-mediated indirect electron transfer to dehalogenation efficiency has been established, aiming to better understand the dehalogenation mechanisms. The analyses of entropy and enthalpy illustrate that low pH has a lower energy barrier than that of high pH, facilitating the transformation from proton to H*. Furthermore, the quantitative relationship between dehalogenation efficiency and energy consumption shows an exponential increase of energy consumption for dehalogenation efficiency increasing from 90% to 100%. Lastly, challenges and perspectives are discussed for efficient dehalogenation and practical applications.

Stainless Steel-Supported Amorphous Nickel Phosphide/Nickel as an Electrocatalyst for Hydrogen Evolution Reaction

Recently, nickel phosphides (Ni-P) in an amorphous state have emerged as potential catalysts with high intrinsic activity and excellent electrochemical stability for hydrogen evolution reactions (HER). However, it still lacks a good strategy to prepare amorphous Ni-P with rich surface defects or structural boundaries, and it is also hard to construct a porous Ni-P layer with favorable electron transport and gas-liquid transport. Herein, an integrated porous electrode consisting of amorphous Ni-P and a Ni interlayer was successfully constructed on a 316L stainless steel felt (denoted as Ni-P/Ni-316L). The results demonstrated that the pH of the plating solution significantly affected the grain size, pore size and distribution, and roughness of the cell-like particle surface of the amorphous Ni-P layer. The Ni-P/Ni-316L prepared at pH = 3 presented the richest surface defects or structural boundaries as well as porous structure. As expected, the as-developed Ni-P/Ni-316L demonstrated the best kinetics, with η10 of 73 mV and a Tafel slope of ca. 52 mV dec-1 for the HER among all the electrocatalysts prepared at various pH values. Furthermore, the Ni-P/Ni-316L exhibited comparable electrocatalytic HER performance and better durability than the commercial Pt (20 wt%)/C in a real water electrolysis cell, indicating that the non-precious metal-based Ni-P/Ni-316L is promising for large-scale processing and practical use.

Synergistic effect of atomically dispersed Fe-Ni pair sites for electrocatalytic reactions to remove chlorinated organic compounds

Electrocatalysis is a promising and environmentally friendly technology for the removal of refractory organics. Diatomic catalysts with an increased number of active sites have emerged with further expansion of the field of atomic catalysts. Here, a metal diatomic FeNi supported graphene (FeNi/N-rGO) catalyst is successfully synthesized. The atomically dispersed Fe and Ni species on graphene is verified by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectroscopy. The pollutant degradation efficiencies for the cathode and anode are found to reach 97.6% and 95.8%, respectively, within 90 min in the diatomic catalytic system. According to DFT theoretical calculations, FeNi diatomic catalysts have a lower free energy (ΔG = -0.2 eV), and the higher adsorption energy for the active substance H* is -0.412 eV. This work presents a method for the preparation of high-performance diatomic catalysts and promotes their application in the electrochemical degradation of chlorinated organic pollutants.

TiO2@PDA inorganic-organic core-shell skeleton supported Pd nanodots for enhanced electrocatalytic hydrodechlorination

The development of catalysts with high atom utilization and activity is the biggest challenge for electrocatalytic hydrodechlorination (EHDC) technology. Herein, a design strategy of TiO₂@PDA inorganic-organic core-shell skeleton for loading lower dosage of noble palladium (Pd) with robust activity is reported. The self-supported TiO₂@PDA nanorod arrays provides exposed surface area for anchoring Pd and PDA as interlayer controls the Pd nucleation to form nanodots with high dispersion, realizing high atom utilization. Moreover, the strong interaction between PDA and Pd realizes the coexistence of electron-rich and deficient Pd species with suitable proportion, which facilitate the H* formation and the C-Cl bond activation, respectively, resulting in the promoted activity. The optimal TiO₂@PDA/Pd electrode exhibits a low dosage of Pd (0.093 mg cm^-2) and excellent activity for 4-chlorophenol reduction with a mass activity (MA) of 23.96 min^-1g^-1, which is 3.31 times as high as that of TiO₂/Pd. The design scheme with inorganic-organic core-shell skeleton as support is benefit for developing highly efficient and lower price elctrocatalysts for EHDC.

Generation of atomic hydrogen by Ni-Fe hydroxides: Mechanism and activity for hydrodechlorination of trichloroethylene

Atomic hydrogen (H•) is highly reactive for the hydrodechlorination of trichloroethylene (TCE). In this work, we found that the coprecipitation of Ni²⁺ and Fe²⁺ at neutral pH led to an unprecedented catalytic generation of H•. The generated H• effectively dechlorinate TCE to nontoxic ethylene and ethane, and Fe²⁺ is the only electron donor. The abundant adsorbed H• produced with a Ni/Fe ratio of 0.4 enhances hydrogen evolution reaction causing a low efficiency for hydrodechlorination. In contrast, the active absorbed H• is generated in the crystal lattice of Ni-Fe hydroxides with a Ni/Fe ratio of 3.0 causing highly efficient hydrodechlorination of TCE. This work not only reveals the mechanism of catalytic hydrodechlorination by Ni-Fe hydroxides at neutral pH, but also provides a novel approach to detoxify TCE in contaminated water using facile precipitated Ni-Fe hydroxides.

Selective Electrocatalytic Reduction of Nitrate to Ammonia with Nickel Phosphide

Liquid ammonia is considered a sustainable liquid fuel and an easily transportable carrier of hydrogen energy; however, its synthesis processes are energy-consuming, high cost, and low yield rate. Herein, we report the electrocatalytic reduction of nitrate (NO₃^-) (ERN) to ammonia (NH₃) with nickel phosphide (Ni₂P) used as a noble metal-free cathode. Ni₂P with (111) facet was grown in situ on nickel foam (NFP), which was regarded as a self-supporting cathode for ERN to synthesis NH₃ with high yield rate (0.056 mmol h^-1 mg^-1) and superior faradaic efficiency of 99.23%. The derived atomic H (*H), verified by a quenching experiment and an electron spin resonance (ESR) technique, effectively enhanced the high selectivity for NH₃ generation. DFT calculations indicated that *NO₃ was deoxygenated to *NO₂ and *NO, and *NO was subsequently hydrogenated with *H to generate NH₃ with an energy releasing process (ΔG < 0). OLEMS also proved that NO was the merely gas intermediate. NFP exhibited the unique superhydrophilic surface, metallic properties, low impedance, and abundant surface sites, favorable for adsorption of NO₃^-, generation of *H, and then hydrogenation of NO₃^-. Hence, NFP cathode showed high selectivity for NH₃ (89.1%) in ERN. NFP with long-term stability and low energy consumption provides a facile strategy for synthesis of NH₃ and elimination of NO₃^- contamination.

Optimizing the metal-support interactions at the Pd-polymer carbon nitride Mott-Schottky heterojunction interface for an enhanced electrocatalytic hydrodechlorination reaction

We reported one novel strategy via band engineering of the semiconductor support to optimize the metal-support interactions at a Mott-Schottky heterojunction interface and enhance the metal's electrocatalytic hydrodechlorination (EHDC) performance. Taking palladium-polymer carbon nitride (Pd/PCN) as a model, the band tuning of PCN by heteroatomic phosphorus (P) doping substantially boosted the EHDC of 2,4-dichlorophenol (2,4-DCP, one typical chlorinated organic pollutants (COPs)) on Pd, and a peak specific activity of 0.172 min^-1 cm_Pd^-2 was achieved by Pd/P-PCN-0.25 (0.25 reflected the P content, and denoted the mass ratio of the P source to PCN precursor used in P-PCN synthesis), quadrupling 0.041 min^-1 cm_Pd^-2 of Pd/C and outperforming most of the reported catalysts. The mechanism study revealed the P doping in PCN enabled the positive shift of its Fermi level, which weakened the Pd-PCN interactions and alleviated the electron excess of Pd in Pd/PCN. The P-PCN in Pd/P-PCN-0.25 with the ideal band structure evoked a Pd electronic state that maximized EHDC efficiency. Further investigation into the intermediate products of EHDC on Pd/P-PCN and the biological safety of the 2,4-DCP-contaminated water after EHDC treatment demonstrated the EHDC over our catalyst was environmental-benignity for COPs abatement.

Challenges and opportunities for the biodegradation of chlorophenols: Aerobic, anaerobic and bioelectrochemical processes

Chlorophenols (CPs) are highly toxic and refractory contaminants which widely exist in various environments and cause serious harm to human and environment health and safety. This review provides comprehensive information on typical CPs biodegradation technologies, the most green and benign ones for CPs removal. The known aerobic and anaerobic degradative bacteria, functional enzymes, and metabolic pathways of CPs as well as several improving methods and critical parameters affecting the overall degradation efficiency are systematically summarized and clarified. The challenges for CPs mineralization are also discussed, mainly including the dechlorination of polychlorophenols (poly-CPs) under aerobic condition and the ring-cleavage of monochlorophenols (MCPs) under anaerobic condition. The coupling of functional materials and degraders as well as the operation of sequential anaerobic-aerobic bioreactors and bioelectrochemical system (BES) are promising strategies to overcome some current limitations. Future perspective and research gaps in this field are also proposed, including the further understanding of microbial information and the specific role of materials in CPs biodegradation, the potential application of innovative biotechnologies and new operating modes to optimize and maximize the function of the system, and the scale-up of bioreactors towards the efficient biodegradation of CPs.

Highly selective electrochemical nitrate reduction using copper phosphide self-supported copper foam electrode: Performance, mechanism, and application

A highly active and selective electrode is essential in electrochemical denitrification. Although the emerging Cu-based electrode has attracted intensive attentions in electrochemical NO₃^- reduction, the issues such as restricted activity and selectivity are still unresolved. In our work, a binder-free composite electrode (Cu₃P/CF) was first prepared by direct growth of copper phosphide on copper foam and then applied to electrochemical NO₃^- reduction. The resulting Cu₃P/CF electrode showed enhanced electrochemical performance for NO₃^- reduction (84.3%) with high N₂ selectivity (98.01%) under the initial conditions of 1500 mg L^-1 Cl^- and 50 mg N L^-1 NO₃^-. The cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) demonstrated that electrochemical NO₃^- reduction was achieved through electron transfer between NO₃^- and Cu⁰ originated from CF. The in-situ grown Cu₃P served as the bifunctional catalyst, the electron mediator or bridge to facilitate the electron-transfer for NO₃^- reduction and the stable catalyst to produce atomic H* toward NO₂^- conversion. Meanwhile, the Cu₃P/CF remained its electrocatalytic activity even after eight cyclic experiments. Finally, a 2-stage treatment strategy, pre-oxidation by Ir-Ru/Ti anode and post-reduction by Cu₃P/CF cathode, was designed for electrochemical chemical oxygen demand (COD) and total nitrogen (TN) removal from real wastewater.

A novel immobilized Z-scheme P3HT/α-Fe2O3 photocatalyst array: Study on the excellent photocatalytic performance and photocatalytic mechanism

The Z-scheme photocatalyst is valuable for use in polluted water purification. To improve the practical application value of the Z-scheme, in this study, a nano α-Fe₂O₃ and P3HT composite photocatalyst array was synthesized by electrophoretic deposition for the first time. This material was named F1P. The EPR, VBXPS and in situ illumination XPS analyses indicated that the charge transfer path of F1P conforms to the Z-scheme, and F1P array has a high light energy conversion efficiency. Due to the advantages of the Z-scheme system and the good light harvesting ability, F1P exhibited a good degradation effect on different types of pollutants under visible light irradiation. The degradation efficiency of tetracycline and bisphenol A by F1P can reach 97 % and 99 %, respectively. Moreover, F1P showed a certain resistance to water quality changes. After four cycles, F1P can maintain the structural stability and good pollutant treatment effect. Due to the high redox ability of F1P, the complex structure of pollutants can be destroyed and the degradation path of pollutants in F1P system was also analyzed. This study provides a new way of synthesizing Z-scheme systems and immobilizing Z-scheme photocatalysts. F1P is a new material with high practicability.

Mechanistic Investigation of Haloacetic Acid Reduction Using Carbon-Ti4O7 Composite Reactive Electrochemical Membranes

Carbon-Ti₄O₇ composite reactive electrochemical membranes (REMs) were studied for adsorption and electrochemical reduction of haloacetic acids (HAAs). Powder activated carbon (PAC) or multiwalled carbon nanotubes (MWCNTs) were used in these composites. Results from flow-through adsorption experiments with dibromoacetic acid (DBAA) as a model HAA were interpreted with a transport model. It was estimated that ∼46% of C in the MWCNT-REM and ∼10% of C in the PAC-REM participated in adsorption reactions. Electrochemical reduction of 1 mg L^-1 DBAA in 10 mM KH₂PO₄/K₂HPO₄ at -1.5 V/SHE (hydraulic residence time, ∼11 s) resulted in 73, 94, and 96% DBAA reduction for Ti₄O₇, PAC-Ti₄O₇, and MWCNT-Ti₄O₇ REMs, respectively. The reactive-transport model yielded k_obs values between 9.16 and 33.3 min^-1, which were 2 to 4 orders of magnitude higher than previously reported. PAC-Ti₄O₇ REM was tested with tap water spiked with 0.11 mg L^-1 of nine different HAAs in a similar reduction experiment. The results indicated that all HAAs were reduced to <20 μg L^-1. Moreover, the total combined concentration of five regulated HAAs was lower than the regulatory limit (60 μg L^-1). Density functional theory simulations suggest that a direct electron transfer reaction was the probable rate-determining step for HAA reduction.