Scaling behavior of iron in capacitive deionization (CDI) system

3D grape string-like heterostructures enable high-efficiency sodium ion capture in Ti3C2Tx MXene/fungi-derived carbon nanoribbon hybrids

2D transition metal carbides and carbonitrides (MXenes) have emerged as promising electrode materials for electrochemistry ion capture but always suffer from severe layer-restacking and irreversible oxidation that restrains their electrochemical performance. Here we design a dual strategy of microstructure tailoring and heterostructure construction to synthesize a unique 3D grape string-like heterostructure consisting of Ti3C2Tx MXene hollow microspheres wrapped by fungi-derived N-doping carbon nanoribbons (denoted as GMNC). The 3D grape string-like heterostructure effectively avoids the aggregation of Ti3C2Tx MXene sheets and enhances the stability of MXenes, providing abundant active sites for ion capture, and an interconnected conductive bionic nanofiber network for high-rate electron transport. In consequence, GMNC achieves a superior adsorption capacity for sodium ions (Na+) in capacitive deionization (CDI) (162.37 mg gNaCl-1) with an ultra-high instantaneous adsorption rate (30.52 mg g-1 min-1) at an applied voltage of 1.6 V and satisfactory cycle stability over 100 cycles, which is a strong performer among the state-of-the-art values for MXene-based CDI electrodes. In addition, in situ electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) measurement combined with density functional theory (DFT) reveals the mechanisms of the Na+ capture process in the GMNC heterostructure. This work opens a new avenue for designing high-performance MXenes with a 3D hierarchical heterostructure for advanced electrochemical applications.

Insufficient desorption of ions in constant-current membrane capacitive deionization (MCDI): Problems and solutions

Membrane capacitive deionization (MCDI) is a water desalination technology that involves the removal of charged ions from water under an electric field. While constant-current MCDI coupled with stopped-flow during ion discharge is expected to exhibit high water recovery and good performance stability, previous studies have typically been undertaken using NaCl solutions only with limited investigation of MCDI performance using multi-electrolyte solutions. In the present work, the desalination performance of MCDI was evaluated using feed solutions with different levels of hardness. The increase of hardness resulted in the degradation of desalination performance with the desalination time (Δtd), total removed charge, water recovery (WR) and productivity decreasing by 20.5%, 21.8%, 3.8% and 3.2%, respectively. A more serious degradation of WR and productivity would be caused if Δtd decreases further. Analysis of the voltage profiles and effluent ion concentrations reveal that the insufficient desorption of divalent ions at constant-current discharge to 0 V was the principal reason for the degradation of performance. The Δtd and WR can be improved by discharging the cell using a lower current but the productivity decreased by 15.7% on decreasing the discharging current from 161 to 107 mA. Discharging the cell to a negative potential was shown to be a better option with the Δtd, total removed charge, WR and productivity increasing by 27.4%, 23.9%, 3.6% and 5.3%, respectively, when the cell was discharged to a minimum voltage of - 0.3 V. Use of such a method should be feasible for operation of full scale MCDI plants and would be expected to lead to better regeneration of the electrode, improved desalination performance and, potentially, a significant reduction in the need for use of clean-in-place procedures.

A facile green "wastes-treat-wastes" strategy: Electrogenerated chloramines for nanofiltration concentrate recirculation

Use of nanofiltration (NF) membrane to reuse the secondary wastewater suffers from severer biofouling and refractory concentrate. To realize sustainable NF membrane processes in water purification, the electro-oxidation (EO) process using boron-doped diamond (BDD) anodes was applied in current study to treat the NF concentrate for removal of organic contaminates and nutrients using simultaneously controllable in-situ generation of chloramines. The electrolytic effluent would be mixed with the raw secondary wastewater as the feed of subsequent NF process for conducting chloramination to mitigate membrane biofouling. It was found that under a constant current density of 30 mA/cm², the chloramine formed with the electrolysis while its concentration reached the maximum at 30 min of electrolysis when NH₃-N was 7 mg/L and Cl^- concentration was below 500 mg/L. The complete elimination of antibiotics and bacteria can be attained in the hybrid NF-EO process thanks to the in-situ simultaneous generation of large amount of chloramine. In particular, the membrane biofouling was effectively alleviated to maintain a stable permeate flux during the 160-h period of sustainable operation. Our study provides a promising "wastes-treat-wastes" strategy for sustainable reuse of secondary wastewater.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Recent progress in materials and architectures for capacitive deionization: A comprehensive review

Capacitive deionization is an emerging and rapidly developing electrochemical technique for water desalination across the globe with exponential growth in publications. There are various architectures and materials being explored to obtain utmost electrosorption performance. The symmetric architectures consist of the same material on both electrodes, while asymmetric architectures have electrodes loaded with different materials. Asymmetric architectures possess higher electrosorption performance as compared with that of symmetric architectures owing to the inclusion of either faradaic materials, redox-active electrolytes, or ion specific pre-intercalation material. With the materials perspective, faradaic materials have higher electrosorption performance than carbon-based materials owing to the occurrence of faradaic reactions for electrosorption. Moreover, the architecture and material may be tailored in order to obtain desired selectivity of the target component and heavy metal present in feed water. In this review, we describe recent developments in architectures and materials for capacitive deionization and summarize the characteristics and salt removal performances. Further, we discuss recently reported architectures and materials for the removal of heavy metals and radioactive materials. The factors that affect the electrosorption performance including the synthesis procedure for electrode materials, incorporation of additives, operational modes, and organic foulants are further illustrated. This review concludes with several perspectives to provide directions for further development in the subject of capacitive deionization. PRACTITIONER POINTS: Capacitive deionization (CDI) is a rapidly developing electrochemical water desalination technique with exponential growth in publications. Faradaic materials have higher salt removal capacity (SAC) because of reversible redox reactions or ion-intercalation processes. Combination of CDI with other techniques exhibits improved selectivity and removal of heavy metals. Operational parameters and materials properties affect SAC. In future, comprehensive experimentation is needed to have better understanding of the performance of CDI architectures and materials.

Flotation separation of hazardous polyvinyl chloride towards source control of microplastics based on selective hydrophilization of plasticizer-doping surfaces

As the single largest chlorine source of plastics, hazardous polyvinyl chloride (PVC) has become an increasing environmental concern with the rapid microplastics accumulation. An advanced separation method is advocated to purify waste PVC plastics, optimize physical recycling, and protect aquatic and terrestrial environment safety. In this study, we proposed a novel scheme for the flotation separation of PVC plastics with diverse plasticizer contents (PVCs) via regulating hydrophilicity based on a selective ferric deposition. Rigid PVCs were prone to loading ferric ions and generating hydrophilic shells than flexible PVCs. Plasticizers can diffuse freely through the interior and surface of PVC plastics. Abundant plasticizers thereby overlaid the surface of flexible PVC and shielded PVC matrix from ferric ions. By regulating the ferric concentration, the wettability of PVCs was adjusted to separate rigid and flexible PVCs by froth flotation. Waste PVCs could also be separated from each other through the compound process of ferric deposition and flotation, further confirming its feasibility and stability. Thus far, this study supplies distinctive insights into the wettability regulation of plasticizer-doping PVC surfaces, contributes a pioneering hydrophilization method to PVCs separation and recycling, and mitigates hazardous PVC microplastics by source control.

Unravelling pH Changes in Electrochemical Desalination with Capacitive Deionization

Membrane capacitive deionization (MCDI) is a water desalination technology employing porous electrodes and ion-exchange membranes. The electrodes are cyclically charged to adsorb ions and discharged to desorb ions. During MCDI operation, a difference in pH between feed and effluent water is observed, changing over time, which can cause the precipitation of hardness ions and consequently affect the long-term stability of electrodes and membranes. These changes can be attributed to different phenomena, which can be divided into two distinct categories: Faradaic and non-Faradaic. In the present work, we show that during long-term operation, as the electrodes age over time, the magnitude and direction of pH changes shift. We studied these changes for two different feed water solutions: a NaCl solution and a tap water solution. Whereas we observe a pH decrease during the regeneration with a NaCl solution, we observe an increase during regeneration with tap water, potentially resulting in the precipitation of hardness ions. We compare our experimental findings with theory and conclude that with aged electrodes, non-Faradaic processes are the prominent cause of pH changes. Furthermore, we find that for desalination with tap water, the adsorption and desorption of HCO₃^-and CO₃^2- ions affect the pH changes.

Flow Electrode Capacitive Deionization (FCDI): Recent Developments, Environmental Applications, and Future Perspectives

With the increasing severity of global water scarcity, a myriad of scientific activities is directed toward advancing brackish water desalination and wastewater remediation technologies. Flow-electrode capacitive deionization (FCDI), a newly developed electrochemically driven ion removal approach combining ion-exchange membranes and flowable particle electrodes, has been actively explored over the past seven years, driven by the possibility of energy-efficient, sustainable, and fully continuous production of high-quality fresh water, as well as flexible management of the particle electrodes and concentrate stream. Here, we provide a comprehensive overview of current advances of this interesting technology with particular attention given to FCDI principles, designs (including cell architecture and electrode and separator options), operational modes (including approaches to management of the flowable electrodes), characterizations and modeling, and environmental applications (including water desalination, resource recovery, and contaminant abatement). Furthermore, we introduce the definitions and performance metrics that should be used so that fair assessments and comparisons can be made between different systems and separation conditions. We then highlight the most pressing challenges (i.e., operation and capital cost, scale-up, and commercialization) in the full-scale application of this technology. We conclude this state-of-the-art review by considering the overall outlook of the technology and discussing areas requiring particular attention in the future.

Influence of natural organic matter on membrane capacitive deionization performance

Membrane capacitive deionization (MCDI) is a prospective desalination technology that removes ions using an electric potential difference across charged porous carbon electrodes. Natural organic matter (NOM) in feed water could influence the electrochemical process by leading to pore-blockages or forming a cake layer on the ion-exchange membrane-coated porous carbon electrode, thereby hindering ion removal. In this study, we explored the influence of different types of NOM, namely, humic acid (HA) and tannic acid (TA), on the MCDI desalination process for feed waters with inorganic salts (NaCl and CaCl₂). HA significantly interfered with the adsorption process and reduced the salt removal rate by up to 68% in the case of NaCl-based feed water. However, the influence of HA on salt removal in the case of CaCl₂-based feed water was marginal owing to the formation of a charge-neutralized complex, which was caused by the egg-box effect between Ca²⁺ and HA. TA reduced removal rates of salts (NaCl and CaCl₂) by 37% and 60%, respectively. This is because of the lower molecular weight and smaller hydrodynamic diameter of TA relative to that of HA, owing to which TA exhibits a stronger adhesion to the electrode pore structure. Furthermore, as TA substantially reduces MCDI performance with regard to the adsorption of inorganic salts, its presence in feed water results in higher electrical resistance and energy consumption.

Selective electrosorption of Ca2+ by MXene cathodes coupled with NiAl-LMO anodes through ion intercalation

Capacitive deionization (CDI), or electrosorption, is a desalination technology that exhibits significant potential; however, its major technical requirement of selective ion separation poses a challenge for its further practical application. Herein, a titanium carbide (MXene)-layered electrosorption electrode with high selectivity for Ca²⁺ was fabricated. The prepared MXene electrode had many surface hydroxyl functional groups that serve as adsorption sites for Ca²⁺. Ca²⁺ was successfully inserted into the interlayers of the MXene cathode and formed a strong interaction with [Ti-O] bonds during the capacitive deionization process. When a Ni-Al layered metal oxide anion intercalation electrode was employed as the counter electrode, Ca²⁺ adsorption by the MXene electrode was significantly enhanced due to the valence compensation balance effect. The maximum Ca²⁺ electrosorption capacity of the MXene electrode reached 1011.82 mg per gram effective MXene material, which is 6.3 times higher than that of Na⁺ based on the Langmuir adsorption isotherm model. The MXene electrode exhibited prominent selectivity for Ca²⁺ ions in the presence of Na⁺ and Mg²⁺. The Ca²⁺/Mg²⁺ selectivity factor for electrosorption reached 2.63, and Ca²⁺/Na⁺ selectivity factor could achieve 9.84, respectively. After five electrosorption/desorption cycles, the Ca²⁺ removal rate only decreased from 46.96% to 45.34%, suggesting that the MXene electrode has excellent stability. Our study demonstrated a novel CDI electrode and technical approach for softening water.

Membrane and Electrochemical Processes for Water Desalination: A Short Perspective and the Role of Nanotechnology

In the past few decades, membrane-based processes have become mainstream in water desalination because of their relatively high water flux, salt rejection, and reasonable operating cost over thermal-based desalination processes. The energy consumption of the membrane process has been continuously lowered (from >10 kWh m-3 to ~3 kWh m-3) over the past decades but remains higher than the theoretical minimum value (~0.8 kWh m-3) for seawater desalination. Thus, the high energy consumption of membrane processes has led to the development of alternative processes, such as the electrochemical, that use relatively less energy. Decades of research have revealed that the low energy consumption of the electrochemical process is closely coupled with a relatively low extent of desalination. Recent studies indicate that electrochemical process must overcome efficiency rather than energy consumption hurdles. This short perspective aims to provide platforms to compare the energy efficiency of the representative membrane and electrochemical processes based on the working principle of each process. Future water desalination methods and the potential role of nanotechnology as an efficient tool to overcome current limitations are also discussed.

Brackish water desalination using reverse osmosis and capacitive deionization at the water-energy nexus

In this article, we present a critical review of the reported performance of reverse osmosis (RO) and capacitive deionization (CDI) for brackish water (salinity < 5.0 g/L) desalination from the aspects of engineering, energy, economy and environment. We first illustrate the criteria and the key performance indicators to evaluate the performance of brackish water desalination. We then systematically summarize technological information of RO and CDI, focusing on the effect of key parameters on desalination performance, as well as energy-water efficiency, economic costs and environmental impacts (including carbon footprint). We provide in-depth discussion on the interconnectivity between desalination and energy, and the trade-off between kinetics and energetics for RO and CDI as critical factors for comparison. We also critique the results of technical-economic assessment for RO and CDI plants in the context of large-scale deployment, with focus on lifetime-oriented consideration to total costs, balance between energy efficiency and clean water production, and pretreatment/post-treatment requirements. Finally, we illustrate the challenges and opportunities for future brackish water desalination, including hybridization for energy-efficient brackish water desalination, co-removal of specific components in brackish water, and sustainable brine management with innovative utilization. Our study reveals that both RO and CDI should play important roles in water reclamation and resource recovery from brackish water, especially for inland cities or rural regions.

Evaluation of long-term performance of a continuously operated flow-electrode CDI system for salt removal from brackish waters

While flow-electrode capacitive deionization (FCDI), one of the most popular CDI variants, possesses a number of advantages over conventional fixed-electrode CDI (e.g., large salt adsorption capacity, high flow efficiency and convenient management of the electrodes), challenges remain in constructing and operating an FCDI system such that it can operate continuously. Here we achieve effective continuous removal of salt from a brackish feed stream using flowing carbon electrodes which are regenerated in a closed-loop manner by using our previously introduced integrated FCDI/MF strategy. The performance of the FCDI/MF system is characterized over a two week period of operation with key factors influencing the desalination performance identified. Results show that the FCDI/MF system is capable of continuously desalinating brackish water (∼2 g L^-1) to portable levels (<0.5 g L^-1) whilst sustaining an extraordinary water recovery rate (∼92%) and relatively low energy consumption (∼0.5 kWh m^-3). No obvious deterioration in performance or membrane fouling was observed during the 14-day operation. While the carbon particles used in the flow electrode exhibited only a minor increase in oxygen-containing groups over the 14 days of operation, a significant reduction in particle size was observed, likely as a consequence of the high-frequency collisions and associated friction between particles that occurred in the FCDI/MF system. Further studies regarding flowable electrode optimization, cell configuration design and process modelling are needed in order to realize the scale-up and practical implementation of this emerging technology.