Application of encapsulated algae into MBR for high-ammonia nitrogen wastewater treatment and biofouling control

Synergistic treatment of digested wastewater with high ammonia nitrogen concentration using straw and microalgae

Microalgae as a promising approach for wastewater treatment, has challenges in directly treating digested piggery wastewater (DPW) with high ammonia nitrogen (NH4+-N) concentration. To improve the performance of microalgae in DPW treatment, straw was employed as a substrate to form a straw-microalgae biofilm. The results demonstrated that the straw-microalgae biofilm achieved the highest NH4+-N removal rate of 193.2 mg L-1 d-1, which was 28.8 % higher than that of culture system without straw. The final NH4+-N concentration in the effluent met the discharge standard of 5 mg L-1. Furthermore, the total organic carbon (TOC) released from straw facilitated bacterial proliferation and the secretion of extracellular polymeric substances (EPS). The EPS and TOC increased the suspension viscosity and surface tension, thereby enhancing the residence time of CO2 in the liquid phase and promoting CO2 fixation. This study presented a novel method for the biological treatment of high-ammonia-nitrogen DPW.

Mini critical review: Membrane fouling control in membrane bioreactors by microalgae

Membrane bioreactors (MBRs) hold significant promise for wastewater treatment, yet the persistent challenge of membrane fouling impedes their practical application. One promising solution lies in the synergy between microalgae and bacteria, offering efficient nutrient removal, reduced energy consumption, and potential mitigation of extracellular polymeric substances (EPS) concentrations. Inoculating microalgae presents a promising avenue to address membrane fouling in MBRs. This review marks the first exploration of utilizing microalgae for membrane fouling control in MBR systems. The review begins with a comprehensive overview of the evolution and distinctive traits of microalgae-MBRs. It goes further insight into the performance and underlying mechanisms facilitating the reduction of membrane fouling through microalgae intervention. Moreover, the review not only identifies the challenges inherent in employing microalgae for membrane fouling control in MBRs but also illuminates prospective pathways for future advancement in this burgeoning field.

Assembly of core-shell Fe3O4 @CD-MOFs derived hollow magnetic microcubes for efficient extraction of hazardous substances: Plausible mechanisms for selective adsorption

Hazardous heavy metals and organic substances removal is of great significance for ensuring the safety of aquatic-ecosystem, yet the highly effective and selective extraction always remains challenging. To address this problem, magnetic hollow microcubes were fabricated through thermal carbonization of Fe3O4-COOH@ γ-CD-MOFs, and core-shell structured precursors were in-situ greenly constructed on a large scale via microwave-assisted self-assembly strategy. As noted, the development of secondary crystallization was utilized to achieve uniform dispersion of cores within MOFs frameworks and thus improved magnetic and adsorption ability of composites. Acquired magnetic Fe3O4 @HC not only can harvest excellent extraction of heavy metals (Cd, Pb, and Cu of 129.87, 151.05, and 106.98 mg·g-1) but also exhibit highly selective adsorption ability for cationic organics (separation efficiency higher than 95.0 %). Impressively, Fe3O4 @HC achieved outstanding adsorption (60-80 %) of Cd in realistic mussel cooking broth with no obvious loss in amino acid. Characterizations better offer mechanistic insight into the enhanced selectivity of positively charged pollutants can be attributed to synergistic effect of ions exchange and electrostatic interaction of abundant oxygen-containing functional groups. Our study provides a feasible route by rationally developing core-shell structured composites to promote the practical applications of sustainable water treatment and value-added utilization of processing by-products.

Insight into the mechanism of nitrogen sufficiency conversion strategy for microalgae-based ammonium-rich wastewater treatment

The strategy of nitrogen sufficiency conversion can improve ammonium nitrogen (NH4+-N) removal with microalgal cells from ammonium-rich wastewater. We selected and identified one promising isolated algal strain, NCU-7, Chlorella sorokiniana, which showed a high algal yield and tolerance to ammonium in wastewater, as well as strong adaptability to N deprivation. The transition from N deprivation through mixotrophy (DN, M) to N sufficiency through autotrophy (SN, P) achieved the highest algal yields (optical density = 1.18 and 1.59) and NH4+-N removal rates (2.5 and 4.2 mg L-1 d-1) from synthetic wastewaters at two NH4+-N concentrations (160 and 320 mg L-1, respectively). Algal cells in DN, M culture obtained the lowest protein content (20.6%) but the highest lipid content (34.0%) among all cultures at the end of the stage 2. After transferring to stage 3, the lowest protein content gradually recovered to almost the same level as SN, P culture on the final day. Transmission electron microscopy and proteomics analysis demonstrated that algal cells had reduced intracellular protein content but accumulated lipids under N deprivation by regulating the reduction in synthesis of protein, carbohydrate, and chloroplast, while enhancing lipid synthesis. After transferring to N sufficiency, algal cells accelerated their growth by recovering protein synthesis, leading to excessive uptake of NH4+-N from wastewater. This study provides specific insights into a nitrogen sufficiency conversion strategy to enhance algal growth and NH4+-N removal/uptake during microalgae-based ammonium-rich wastewater treatment.

Unveiling novel pathways and key contributors in the nitrogen cycle: Validation of enrichment and taxonomic characterization of oxygenic denitrifying microorganisms in environmental samples

Microorganisms play a crucial role in both the nitrogen cycle and greenhouse gas emissions. A recent discovery has unveiled a new denitrification pathway called oxygenic denitrification, entailing the enzymatic reduction of nitrite to nitric oxide (NO) by a putative nitric oxide dismutase (nod) enzyme. In this study, the presence of the nod gene was detected and subsequently enriched in anaerobic-activated sludge, farmland soil, and paddy soil samples. After 150 days, the enriched samples exhibited significant denitrification, and concomitant oxygen production. The removal efficiency of nitrite ranged from 64.6 % to 79.0 %, while the oxygen production rate was between 15.4 μL/min and 18.6 μL/min when exposed to a sole nitrogen source of 80 mg/L sodium nitrite. Additionally, batch experiments and kinetic analyses revealed the intricate pathways and underlying mechanisms governing the oxygenic denitrification reaction by using CARBOXY-PTIO, 18O-labelled water, and acetylene to unravel the intricacies of the reaction. The quantitative polymerase chain reaction (qPCR) results indicated a significant surge in the abundance of nod genes, escalating from 7.59 to 10.12-fold. Moreover, analysis of 16S ribosomal DNA (rDNA) amplicons revealed Proteobacteria as the dominant phylum and Thauera as the main genus, with the presumed affiliation. In this study, a new nitrogen conversion pathway, oxygenic denitrification, was discovered in environmental samples. This process provides the possibility for the control of nitrous oxide in the treatment of nitrogenous wastewater.

Interplay role of microalgae and bio-carriers in hybrid membrane bioreactors on wastewater treatment, membrane fouling, and microbial communities

Algal membrane bioreactors (algae-MBRs) and advanced hybrid biocarrier algal membrane bioreactors (hybrid algae-MBRs) have been investigated to improve the performance of conventional MBRs (C-MBRs). Maximum chemical oxygen demand and nutrient removal efficiencies, similar to the maximum biomass growth rate, chlorophyll-a concentration, and balanced microbial growth, were achieved in the hybrid algae-MBR inoculated with polyethylene biocarriers and algal cells. During the 90 days of operation, the hybrid algae-MBR demonstrated lower membrane fouling without membrane washing, whereas the C-MBR and algae-MBR were washed seven and four times, respectively. Compared to the C-MBR, both the algal MBR and hybrid algal MBR exhibited higher levels of nitrification, with 6 and 10 % greater rates, respectively. In addition, they displayed significant improvements in ammonium biomass uptake compared to the C-MBR, with increases of 30 and 37 %, respectively. In the algae-MBR, the chlorophyll-a results showed proliferation of algae over time. However, biocarriers that provide an additional surface for microbial growth, particularly algal strains, inhibit algal proliferation and result in balanced microbial growth (based on chlorophyll-a/MLVSS) in the bulk solution of the hybrid algae-MBR. In addition, the oxygen mass balance estimated that photosynthesis provided 45 % of the dissolved oxygen required in the studied algal reactors, whereas mixing provided the remainder. Additionally, microbial sequencing results indicated that the microbial communities (e.g., Candidatus, Cloacibacterium, and Falavobacterium) were altered by introducing microalgae and biocarriers that affected the activity of different microorganisms, changed the sludge and fouling layer properties, and improved the performance of the C-MBRs.

Design and assembly of Ag-decorated Bi2O3 @ 3D MXene Schottky heterojunction for the highly permeable and multiple-antifouling of fibrous membrane in the purification of complex emulsified oil pollutants

Membrane separation technology has potential for purifying emulsified oily wastewater. However, the oils, soluble organic substances, and microorganisms can cause complex membrane fouling problems, thereby reducing the separation efficiency and service life. Herein, a highly permeable and multiple-antifouling composite membrane was prepared using porous PAN fibrous mat as support backbone for the assembly of Ag-decorated Bi₂O₃ @ 3D MXene Schottky heterojunction and hydrophilic TA as the adhesive. The unique arrangement of 3D MXene heterojunction and hydrophilic functionalization effectively broke through the limitation of separation flux and synergistically enhanced the anti-fouling performance of membrane. Such fibrous composite membrane achieved an exceedingly high permeability (2717-3328 L·m^-2·h^-1) for various emulsified oils, while ensuring excellent oil/water emulsion retention rate (99.59%) and good cycle stability. Meanwhile, the composite membrane displayed favorable photocatalytic degradation performance toward degrading MeB (96.1%) and antibacterial ability. Furthermore, the MD simulation and free radical trapping experiments were carried out to unravel the molecular interactions during the separation process and the photocatalytic mechanism of composite membrane, respectively. Overall, the combination of photocatalytic self-cleaning, anti-oil adhesion, and antibacterial effect renders the membrane high permeability and multiple-antifouling performance, which provides a new strategy for dealing with complex oily wastewater in petrochemical industry.

Engineering microalgae for water phosphorus recovery to close the phosphorus cycle

As a finite and non-renewable resource, phosphorus (P) is essential to all life and crucial for crop growth and food production. The boosted agricultural use and associated loss of P to the aquatic environment are increasing environmental pollution, harming ecosystems, and threatening future global food security. Thus, recovering and reusing P from water bodies is urgently needed to close the P cycle. As a natural, eco-friendly, and sustainable reclamation strategy, microalgae-based biological P recovery is considered a promising solution. However, the low P-accumulation capacity and P-removal efficiency of algal bioreactors restrict its application. Herein, it is demonstrated that manipulating genes involved in cellular P accumulation and signalling could triple the Chlamydomonas P-storage capacity to ~7% of dry biomass, which is the highest P concentration in plants to date. Furthermore, the engineered algae could recover P from wastewater almost three times faster than the unengineered one, which could be directly used as a P fertilizer. Thus, engineering genes involved in cellular P accumulation and signalling in microalgae could be a promising strategy to enhance P uptake and accumulation, which have the potential to accelerate the application of algae for P recovery from the water body and closing the P cycle.

A Petal-like Structured NiCuOOH-NF Electrode by a Sonochemical Combined with the Electrochemical Method for Ammonia Oxidation Reaction

Direct electrochemical oxidation, as an economical and efficient method, has recently received increasing attention for ammonia-nitrogen wastewater treatment. Developing a low-cost, efficient catalytic electrode is the key to solve the problem of sluggish ammonia oxidation reaction (AOR) kinetics. In this study, a three-dimensional (3D) Ni foam electrode coated with NiCuOOH petal-like cluster structures was prepared using a simple sonochemical method combined with a surface electrochemical reconstruction strategy. This structure has a large surface area and abundant NiCuOOH active sites, giving a good premise for extraordinary electrocatalytic activity of AOR. The results show that the maximum current density for AOR reaches 97.8 mA cm−2 at 0.60 V vs. saturated calomel electrode (SCE). Additionally, 96.53% of NH4+-N removal efficiency and 63.12% of TN removal efficiency were acquired in the electrolysis system based on the NiCuOOH-NF electrode, as well as a good stability for at least 24 h. It is a promising flow-through anode for the clean treatment of ammonia-nitrogen wastewater.

Effects of high-strength landfill leachate effluent on stress-induced microalgae lipid production and post-treatment micropollutant degradation

This research investigates the effects of landfill leachate effluent concentrations from moving bed biofilm reactor (MBBR) on stress-induced Chlorella vulgaris and Scenedesmus armatus lipid production and post-treatment micropollutant degradation. The effluent concentrations were varied between 25%, 50%, 75%, and 100% (v/v). The landfill leachate influent was treated using two-stage moving bed biofilm reactor under 24 h and 18 h hydraulic retention time (HRT). The results indicated that the effluent concentration was positively correlated with the stress-induced microalgae lipid production in the post-treatment of residual micropollutants. C. vulgaris and S. armatus completely remove residual micropollutants in the effluent. The superoxide dismutase and peroxidase activity were positively correlated with the cellular lipid content. The lipid content of C. vulgaris and S. armatus cultivated in the 18 h HRT effluent were 31-51% and 51-64%, while those in the 24 h HRT effluent were 15-16% and 5-19%. The optimal condition of microalgae cultivation for the post-treatment of residual micropollutants was 50-75% (v/v) effluent concentrations under 18 h HRT, achieving the highest lipid production of 113-116 mg/L for C. vulgaris and 74-75 mg/L for S. armatus. Essentially, the MBBR landfill leachate effluent holds promising potential as a substrate for microalgae lipid production.

A review of ammonia removal using a biofilm-based reactor and its challenges

Extensive growth of industries leads to uncontrolled ammonia releases to environment. This can result in significant degradation of the aquatic ecology as well as significant health concerns for humans. Knowing the mechanism of ammonia elimination is the simplest approach to comprehending it. Ammonia has been commonly converted to less hazardous substances either in the form of nitrate or nitrogen gas. Ammonia has been converted into nitrite by ammonia-oxidizing bacteria and further reduced to nitrate by nitrite-oxidizing bacteria in aerobic conditions. Denitrification takes place in an anoxic phase and nitrate is converted into nitrogen gas. It is challenging to remove ammonia by employing technologies that do not incur particularly high costs. Thus, this review paper is focused on biofilm reactors that utilize the nitrification process. Many research publications and patents on biofilm wastewater treatment have been published. However, only a tiny percentage of these projects are for full-scale applications, and the majority of the work was completed within the last few decades. The physicochemical approaches such as ammonia adsorption, coagulation-flocculation, and membrane separation, as well as conventional biological treatments including activated sludge, microalgae, and bacteria biofilm, are briefly addressed in this review paper. The effectiveness of biofilm reactors in removing ammonia was compared, and the microbes that effectively remove ammonia were thoroughly discussed. Overall, biofilm reactors can remove up to 99.7% ammonia from streams with a concentration in range of 16-900 mg/L. As many challenges were identified for ammonia removal using biofilm at a commercial scale, this study offers future perspectives on how to address the most pressing biofilm issues. This review may also improve our understanding of biofilm technologies for the removal of ammonia as well as polishing unit in wastewater treatment plants for the water reuse and recycling, supporting the circular economy concept.

Nitrification performance and bacterial community dynamics in a membrane bioreactor with elevated ammonia concentration: The combined inhibition effect of salinity, free ammonia and free nitrous acid on nitrification at high ammonia loading rates

The responses of the operational performance and bacterial community structure of a nitrification membrane bioreactor (MBR) to elevated ammonia loading rate (ALR) were investigated. Effective nitrification performance was achieved at high ALR up to 3.43 kg NH₄⁺-N/m³·d, corresponding to influent NH₄⁺-N concentration of 2000 mg/L. Further increasing influent NH₄⁺-N concentration to 3000 mg/L, the MBR system finally became completely inefficient due to the combined inhibition effect of salinity, free ammonia and free nitrous acid on nitrification. Ammonia-oxidizing bacteria (AOB) Nitrosomonas were enriched with the increase of ALR. The relative abundance of Nitrosomonas in the sludge with ALR of 2.57 kg NH₄⁺-N/m³·d was up to 14.82%, which were 9-fold and 53-fold higher than that in seed sludge and the sludge with ALR of 0.10 kg NH₄⁺-N/m³·d, respectively. The phylogenetic analysis of AOB amoA genes showed that Nitrosomonas europaea/mobilis lineage are chiefly responsible for catalyzing ammonia oxidation at high ALRs.

Enhanced pollutants removal and high-value cell inclusions accumulation with Fe2+ in heavy oil refinery treatment system using Rhodopseudomonas and Pseudomonas

Metal ions has been widely used as a method of improving pollutant removal efficiency in wastewater biological treatment system. In order to enhance pollutants removal and high-value cell inclusions accumulation in heavy oil refinery wastewater treatment systems using PSB, different reactors were built feeding with different Fe²⁺ concentrations respectively, and run with enriching Rhodopseudomonas and Pseudomonas in the reactors. Solute chemical oxygen demand (SCOD), ammonia (NH₄⁺-N), nitrate nitrogen (NO₃^--N), nitrous nitrogen (NO₂^--N), Fe²⁺, and related cell inclusions were all detected, moreover, microbial community structure and the quantity of Rhodopseudomonas and Pseudomonas were also detected. The results showed that at the optimal dosage of Fe²⁺ with 20 mg/L, the corresponding removal ratios of solute chemical oxygen demand and ammonia were 73.51% and 92.26%, respectively. The yields of carotenoid, bacteriochlorophyll, and coenzyme Q₁₀ were 11.18, 6.75, and 9.84 mg/g-DCW respectively. Furthermore, with 20 mg/L Fe²⁺ dosage, the relative abundance and gene number of Rhodopseudomonas were the highest in the system, which were 91.57% and 1.843 × 10⁶ gene copies/μL, while Fe²⁺ had no obvious effect on the growth of Pseudomonas. The results showed that adding Fe²⁺ has improved the removal of pollutants and accumulation of high-value cells inclusions, also provided theoretical guidance for the treatment of heavy oil refinery wastewater using PSB.

Nanocell hybrids for green chemistry

Global concerns about reducing or minimizing the costs associated with toxic waste materials have driven the continuing development of green-cell-based biosynthesis methods. Inspired by the hybridization phenomenon of living organisms, recent interest has arisen in nanocell hybrids that possess multiple new functions. They have potential to propel biosynthesis into a new generation of green chemistry. This review article discusses the development of applications for nanocell hybrids in the areas of sustainable energy, clean environment, and green catalysis. Continuing advances in these hybrids will require combining knowledge from the fields of biology, physics, chemistry, material science, and engineering.

Membrane bioreactors for hospital wastewater treatment: recent advancements in membranes and processes

Discharged hospital wastewater contains various pathogenic microorganisms, antibiotic groups, toxic organic compounds, radioactive elements, and ionic pollutants. These contaminants harm the environment and human health causing the spread of disease. Thus, effective treatment of hospital wastewater is an urgent task for sustainable development. Membranes, with controllable porous and nonporous structures, have been rapidly developed for molecular separations. In particular, membrane bioreactor (MBR) technology demonstrated high removal efficiency toward organic compounds and low waste sludge production. To further enhance the separation efficiency and achieve material recovery from hospital waste streams, novel concepts of MBRs and their applications are rapidly evolved through hybridizing novel membranes (non hydrophilic ultrafiltration/microfiltration) into the MBR units (hybrid MBRs) or the MBR as a pretreatment step and integrating other membrane processes as subsequent secondary purification step (integrated MBR-membrane systems). However, there is a lack of reviews on the latest advancement in MBR technologies for hospital wastewater treatment, and analysis on its major challenges and future trends. This review started with an overview of main pollutants in common hospital waste-water, followed by an understanding on the key performance indicators/criteria in MBR membranes (i.e., solute selectivity) and processes (e.g., fouling). Then, an in-depth analysis was provided into the recent development of hybrid MBR and integrated MBR-membrane system concepts, and applications correlated with wastewater sources, with a particular focus on hospital wastewaters. It is anticipated that this review will shed light on the knowledge gaps in the field, highlighting the potential contribution of hybrid MBRs and integrated MBR-membrane systems toward global epidemic prevention.

Treatment of municipal wastewater by employing membrane bioreactors combined with efficient nitration microbial communities isolated by Isolation Chip with Plate Streaking technology

In this research, we developed a method so-called Isolation Chip with Plate Streaking (ICPS) to selectively enrich nitrifying microbial consortium for treating municipal wastewater. In batch experiment, these bacterial communities were able to remove NH₃ -N in 72 h with an efficiency of 96%. Firmicutes, Bacteroidetes, and Proteobacteria species are dominant bacteria in these communities. When the bacterial communities were used in the membrane bioreactor under typical condition, the removal efficiency was 81.0%. In contrast, under the actual wastewater condition, the efficiency could reach 91.2%. All above results showed clearly that the consortium selected by our ICPS method could achieve high-efficient NH₃ -N removal, thus offering a reliable technique for screening functional microorganisms in the field of water treatment. PRACTITIONER POINTS: ICPS technology was designed and used for screening specialized NH₃ -N-removing isolates. The screening process benefited the growth of the dominant nitrifying bacteria Firmicutes and Bacteroidetes. When the functional bacteria applied into the MBR, the NH₃ -N removal efficiency was 91.2% under actual wastewater conditions.

New concept in swine wastewater treatment: development of a self-sustaining synergetic microalgae-bacteria symbiosis (ABS) system to achieve environmental sustainability

Much attention has been paid to developing methods capable of synchronous removal of pollutants from swine wastewater. Due to the natural symbiotic interactions between microalgae and bacteria, the microalgae-bacteria symbiosis (ABS) system has been found to have potential for treating wastewater. However, the corresponding biological mechanisms in the ABS system and the role of dynamic microbial community evolution in pollutant removal systems remain poorly understood. Therefore, we investigate the potential of an ABS system for pollutant removal applications and analyze the bacterial consortium symbiotically combined with Chlorella sp. MA1 and Coelastrella sp. KE4. The NH₄⁺-N and PO₄^3--P removal efficiencies were significantly increased from 12.79% to 99.52% and 35.66% to 96.06% due to biotic interactions between the microalgae and bacteria. The abundance of bacterial taxa and genes related to oxidative stress, cell growth and nitrogen transfer were found to increase in response to photosynthesis, respiration and NH₄⁺-N uptake. Furthermore, pathogen inactivation was induced via microalgae, co-driven by microbial succession under high dissolved oxygen conditions. In this microalgae-enhanced ABS system, the interactions between microalgae and bacteria are established for pathogens elimination and nitrogen cycling, verifying that the ABS system is an effective and environmentally sustainable swine wastewater treatment method.

QQ-PAC core-shell structured quorum quenching beads for potential membrane antifouling properties

Quorum quenching (QQ) has been proven to be an effective method to reduce MBR membrane biological contamination. In this paper, a novel and efficient QQ-PAC core-shell beads were prepared for mitigating the membrane contamination. The bead was composed of two parts: QQ bacteria embedded in the core and PAC in the shell. The microstructure of the bead was observed by scanning electron microscopy (SEM) and the functional groups were revealed by Fourier transform infrared spectroscopy (FTIR). Meanwhile, the mechanical strength, swelling property, penetration property and QQ activity of the core bead, the core shell-without PAC bead and the core shell-with PAC bead were compared. The core shell-with PAC structure improved the adsorption capacity under good mass transfer conditions. Besides, the combined effect of QQ bacteria and PAC enhanced the QQ effect and alleviated the process of MBR membrane biological contamination consequently. Therefore, the QQ-PAC core-shell beads have a potential possibility in MBR membrane fouling control as the immobilization technology of QQ bacteria.

Coupling of Immobilized Photosynthetic Bacteria with a Graphene Oxides/PSF Composite Membrane for Textile Wastewater Treatment: Biodegradation Performance and Membrane Anti-Fouling Behavior

The membrane bioreactor (MBR), as one of the promising technologies, has been widely applied for treatments of wastewater. However, serious membrane fouling and low microbial activity have been reported as major problems hindering the development of the MBR. To overcome these drawbacks, we intend to improve the MBR process in the view of membrane surface modification and efficient granular bacteria cultivation. In the present study, immobilized photosynthetic bacteria integration with graphene oxide (GO)/polysulfone (PSF) composite membrane separation (IPMBR) was first applied for textile wastewater treatment. Due to the high activity of immobilized cells, the IPMBR system exhibited higher efficiency on the removal of color, ammonia-nitrogen, and chemical oxygen demand than the conventional MBR system. In comparison with a pure PSF membrane, GO/PSF composite membrane presented the higher hydrophilicity (water contact angles of 62.9°) and more attractive permeability (178.5 L/m²h) by reducing the adhesion of hydrophobic foulants. During the whole operation, the immobilized photobioreactor exhibited approximately seven times higher membrane permeability that that of the conventional MBR. Meanwhile, the effect of the structure and character of immobilized photosynthetic bacteria on the membrane fouling reduction was investigated in detail. The change of extracellular polymeric substance concentration, settleability and particle size of flocs was very beneficial to alleviate membrane fouling. As a result, this research will open a new avenue for developing efficient and anti-fouling MBR technology in the future.