Nontargeted identification and predicted toxicity of new byproducts generated from UV treatment of water containing micropollutant 2-mercaptobenzothiazole

2-Mercaptobenzothiazole-derived vulcanization accelerators in urine samples from Chinese adults

Studies have discovered wide presence of 2-mercaptobenzothiazole (2-MBT) and 2-MBT-derived vulcanization accelerators (MVAs) in household dust samples, suggesting that these chemicals may have been pervasive in the environment. However, despite the potential for human exposure, the presence of MVAs in human urine, a common matrix used for assessing exposure to environmental chemicals, has not been thoroughly investigated. The current study comprehensively analyzed 11 kinds of MVAs in urine samples from the recruited general population (n = 197) living in Taizhou city, China. Five kinds of MVAs were detectable in >50 % of human urine samples. This indicates the widespread exposure to these vulcanization accelerators among the general population. The predominant target analytes in human urine were 2-MBT and 2,2'-dithiobisbenzothiazole (MBTS), with the mean urinary concentrations of 2.7 ng/mL (range Collapse

Key Words

• 2-MBT
• Human exposuren
• MBTS
• Urinary concentration
• Vulcanization accelerators

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Xiaoyu Wu Taizhou Central Hospital (Taizhou University Hospital), School of Medicine, Taizhou University, Taizhou, Zhejiang 318000, PR China
Yingying Zhu School of Life Sciences, Taizhou University, Taizhou, Zhejiang 318000, PR China
Ruyue Guo Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou, Zhejiang 310032, PR China
Juxiu Huang Taizhou Central Hospital (Taizhou University Hospital), School of Medicine, Taizhou University, Taizhou, Zhejiang 318000, PR China
Hangbiao Jin Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou, Zhejiang 310032, PR China
Lisha Zhou Taizhou Central Hospital (Taizhou University Hospital), School of Medicine, Taizhou University, Taizhou, Zhejiang 318000, PR China.

Collapse

Tailored MXene-derived nano-heterostructure oxides for peroxymonosulfate activation in the treatment of municipal wastewaters

Nowadays, in the field of environmental protection, a huge effort is focused on efficient and sustainable processes to treat wastewaters. The current study emphasizes the photocatalytic performance of TiNbOx, a nano-heterostructure material derived from the oxidation of (Ti0.75Nb0.25)2CTx MXene. The TiNbOx nano-heterostructure exhibited remarkable performance in the degradation of caffeine (CAF) and sulfamethoxazole (SMX) under UVA irradiation in the presence of peroxymonosulfate (PMS). Under optimal conditions, 0.2 g L-1 of TiNbOx, 0.5 mM PMS and 50 μM concentration of pollutants and natural pH of deionized water, we observed a complete degradation of SMX and 91% degradation of CAF. Scavenging studies provided evidence for the involvement of ˙OH and SO4˙- in the degradation of the pollutants, which was also supported by indirect techniques of electron paramagnetic resonance (EPR) spectroscopy. The degradation pathway of the pollutants was analyzed by liquid chromatography-mass spectrometry (LC-MS) and several mechanisms were suggested including hydroxylation and isoxazole ring-opening reactions. In addition, X-ray photoelectron spectroscopy (XPS) supported the proposed degradation mechanism. The reusability test underscored the high stability and efficiency of TiNbOx. Moreover, the significance of this research was emphasized by conducting degradation studies in tap water (TW) and tertiary effluents of the wastewater (WW) treatment plant in Bratislava. Under optimal conditions, 49% and 30% CAF were degraded in TW and WW, respectively, after 12 hours of reaction. For SMX, 68% and 67% degradations were obtained in TW and WW, respectively.

Ecological linkages between top-down designed benzothiazole-degrading consortia and selection strength: From performance to community structure and functional genes

The inefficient biodegradation and incomplete mineralization of nitrogenous heterocyclic compounds (NHCs) have emerged as a pressing environmental concern. The top-down design offers potential solutions to this issue by targeting improvements in community function, but the ecological linkages between selection strength and the structure and function of desired microbiomes remain elusive. Herein, the integration of metagenomics, culture-based approach, non-targeted metabolite screening and enzymatic verification experiments revealed the effect of enrichment concentration on the top-down designed benzothiazole (BTH, a typical NHC)-degrading consortia. Significant differences were observed for the degradation efficiency and community structure under varying BTH selections. Notably, the enriched consortia at high concentrations of BTH were dominated by genus Rhodococcus, possessing higher degradation rates. Moreover, the isolate Rhodococcus pyridinivorans Rho48 displayed excellent efficiencies in BTH removal (98 %) and mineralization (∼ 60 %) through the hydroxylation and cleavage of thiazole and benzene rings, where cytochrome P450 enzyme was firstly reported to participate in BTH conversion. The functional annotation of 460 recovered genomes from the enriched consortia revealed diverse interspecific cooperation patterns that accounted for the BTH mineralization, particularly Nakamurella and Micropruina under low selection strength, and Rhodococcus and Marmoricola under high selection strength. This study highlights the significance of selection strength in top-down design of synthetic microbiomes for degrading refractory organic pollutants, providing valuable guidance for designing functionally optimized microbiomes used in environmental engineering.

Particle sizes crucially affected the release of additives from tire wear particles during UV irradiation and mechanical abrasion

In the environment, tire wear particles (TWPs) could release various additives to induce potential risk, while the effects of particle size on the additive release behavior and ecological risk from TWPs remain unknown. This study investigated the effects and mechanisms of particle sizes (>2 mm, 0.71-1 mm, and <0.1 mm) on the release behavior of TWPs additives under mechanical abrasion and UV irradiation in water. Compared to mechanical abrasion, UV irradiation significantly increased the level of additives released from TWPs. Especially, the additive releasing characteristics were critically affected by the particle sizes of TWPs, manifested as the higher release in the smaller-size ones. After 60 d of UV irradiation, the concentration of antioxidant N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD) reached 10.79 mg/L in the leachate of small-sized TWPs, 2.78 and 5.36 times higher than that of medium-sized and large-sized TWPs. The leachate of the small-sized TWPs also showed higher cytotoxicity. •OH and O2•- were identified as the main reactive oxygen species (ROS), which exhibited higher concentrations and dramatic attack on small-sized TWPs to cause pronounced fragmentation and oxidation, finally inducing the higher release of additives. This paper sheds light on the crucial effects and mechanism of particle sizes in the release behavior of TWPs additives, provides useful information to assess the ecological risk of TWPs.

Estrogenic disruption effects and formation mechanisms of transformation products during photolysis of preservative parabens

The ubiquitous presence of emerging contaminants (ECs) in the environment and their associated adverse effects has raised concerns about their potential risks. The increased toxicity observed during the environmental transformation of ECs is often linked to the formation of their transformation products (TPs). However, comprehension of their formation mechanisms and contribution to the increased toxicity remains an unresolved challenge. To address this gap, by combining quantum chemical and molecular simulations with photochemical experiments in water, this study investigated the formation of TPs and their molecular interactions related to estrogenic effect using the photochemical degradation of benzylparaben (BZP) preservative as a representative example. A non-targeted analysis was carried out and three previously unknown TPs were identified during the transformation of BZP. Noteworthy, two of these novel TPs, namely oligomers BZP-o-phenol and BZP-m-phenol, exhibited higher estrogenic activities compared to the parent BZP. Their IC50 values of 0.26 and 0.50 μM, respectively, were found to be lower than that of the parent BZP (6.42 μM). The binding free energies (ΔGbind) of BZP-o-phenol and BZP-m-phenol (-29.71 to -23.28 kcal·mol-1) were lower than that of the parent BZP (-20.86 kcal·mol-1), confirming their stronger binding affinities toward the estrogen receptor (ER) α-ligand binding domain. Subsequent analysis unveiled that these hydrophobic residues contributed most favorably to ER binding, with van der Waals interactions playing a significant role. In-depth examination of the formation mechanisms indicated that these toxic TPs primarily originated from the successive cleavage of ester bonds (OCH2C6H5 and COO group), followed by their combination with BZP*. This study provides valuable insight into the mechanisms underlying the formation of toxic TPs and their binding interactions causing the endocrine-disrupting effects. It offers a crucial framework for elucidating the toxicological patterns of ECs with similar structures.

Deep dive into the chronic toxicity of tyre particle mixtures and their leachates

Particles from the tread of vehicle tyres are a global pollutant, which are emitted into the environment at an approximate rate of 1.4 kg.year-1 for an average passenger-car. In this study, popular tyre brands were used to generate a tyre tread microparticle mixture. The chronic toxicity of both particles and chemical leachates were compared on a planktonic test species (Daphnia magna). Over 21 days of exposure, pristine tyre tread microparticles were more toxic (LC50 60 mg.L-1) than chemical lechates alone (LC50 542 mg.L-1). Microparticles and leachates showed distinct effects on reproduction and morphological development at environmentally relevant concentrations, with dose-dependent uptake of particles visible in the digestive tract. Chemical characterization of leachates revealed a metal predominance of zinc, titanium, and strontium. Of the numerous organic chemicals present, at least 54 were shared across all 5 tyre brands, with many classified to be very toxic. Our results provide a critically needed information on the toxicity of tyre tread particles and the associated chemicals that leach from them to inform future mitigation measures. We conclude that tyre particles are hazardous pollutants of particular concern that are close to or possibly above chronic environmental safety limits in some locations.

UV-induced photodegradation of emerging para-phenylenediamine quinones in aqueous environment: Kinetics, products identification and toxicity assessments

Substituted para-phenylenediamine quinones (PPD-quinones) are a class of emerging contaminants frequently detected in the aqueous environment. One of them, N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6PPD-Q), was found to cause acute toxicities to aquatic species at extremely low environmental levels. The ubiquitousness and ecotoxicity of such pollutants underscore the importance of their transformation and elimination. In this work, we demonstrated effective removals of five PPD-quinones in aqueous environments under UV irradiation, with up to 94% of 6PPD-Q eliminated after a 40-min treatment. By applying high-resolution mass spectrometry (HRMS) non-targeted screening in combination with isotope labeling strategies, a total of 22 transformation products (TPs) were identified. Coupling with the time-based dynamic patterns, potential transformation mechanisms were identified as an •OH-induced photocatalysis reaction involving bond cleavage, hydroxylation, and oxidation. Computational toxicity assessment predicted lower aquatic toxicity of the TPs than their parent PPD-quinones. Our results in parallel evidenced an obvious reduction of PPD-quinones accompanied by the presence of their TPs in the effluent after UV disinfection in real municipal wastewater. This work builds a comprehensive understanding of the fate, transformation products, and related toxicological characteristics of emerging PPD-quinone contaminants in the aqueous environment.

Spatial distribution, partitioning, and ecological risk assessment of benzotriazoles, benzothiazoles, and benzotriazole UV absorbers in the eastern shelf seas of China

Benzotriazoles (BTRs), benzothiazoles (BTHs), and benzotriazole UV stabilizers (BUVs) have attracted increasing attention due to their ubiquity in the environment, toxicity, and potential ecological risks. However, information on their distributions in the ocean is scarce. In this study, BTRs, BTHs, and BUVs were firstly determined in the surface seawater, sea-surface microlayer (SML), suspended particulate matter (SPM), and sediments of the Yellow Sea (YS) and East China Sea (ECS). The spatial distributions of BTRs, BTHs, and BUVs in the YS and ECS showed offshore decreasing trend in their concentrations, indicating that terrestrial inputs from runoff and rivers had important influences on their distributions. The organic carbon normalized partition coefficients (log Koc) of target contaminants in surface seawater-SPM (3.06-4.16 L/g) and bottom seawater-sediment (2.55-4.82 L/kg) systems were determined. SPM showed greater sorption capacities for most target contaminants than the sediment. The burial capacities of BTHs, BTRs, and BUVs from SPM to surface sediments were evaluated using their respective log Kow values and their sedimentary fluxes in the YS and ECS were quantified. BTRs, BTHs, and BUVs were enriched in the SML, with the enrichment extents of the suspended particulate phase being obviously lower than those of the dissolved phase. The ecological risks of BTRs, BTHs, and BUVs were evaluated using the risk quotient (RQ) method, which showed no toxic risk to aquatic organisms throughout the water phases, but high risk in nearshore sediments.

Recent progress in identification of water disinfection byproducts and opportunities for future research

Numerous disinfection by-products (DBPs) are formed from reactions between disinfectants and organic/inorganic matter during water disinfection. More than seven hundred DBPs that have been identified in disinfected water, only a fraction of which are regulated by drinking water guidelines, including trihalomethanes, haloacetic acids, bromate, and chlorite. Toxicity assessments have demonstrated that the identified DBPs cannot fully explain the overall toxicity of disinfected water; therefore, the identification of unknown DBPs is an important prerequisite to obtain insights for understanding the adverse effects of drinking water disinfection. Herein, we review the progress in identification of unknown DBPs in the recent five years with classifications of halogenated or nonhalogenated, aliphatic or aromatic, followed by specific halogen groups. The concentration and toxicity data of newly identified DBPs are also included. According to the current advances and existing shortcomings, we envisioned future perspectives in this field.

Photoelectrocatalytic selective removal of group-targeting thiol-containing heterocyclic pollutants

The removal of a class of toxic thiol-containing heterocyclic pollutants from complex water matrices has great environmental significance. In this study, a novel photoanode (Au/MIL100(Fe)/TiO₂) with dual recognition functions was designed for selective group-targeting photoelectrocatalytic removal of thiol-containing heterocyclic pollutants from various aquatic systems. The average degradation and adsorption removal efficiency of 2-mercaptobenzimidazole, 2-mercaptobenzothiazole, and 2-mercaptobenzoxazole were still above 96.7% and 13.5% after selective treatment with Au/MIL100(Fe)/TiO₂ even coexisting with 10-fold concentration of macromolecular interferents (sulfide lignin and natural organic matters) and the same concentration of micromolecular structural analogues. While they were below 71.6% and 3.9% after non-selective treatment with TiO₂. Targets in the actual system were selectively removed to 0.9 µg L^-1, which is 1/10 of that after non-selective treatment. FTIR, XPS and operando electrochemical infrared results proved that the highly specific recognition mechanism was mainly attributable to both the size screening of MIL100(Fe) toward targets and Au-S bond formed between -SH group of targets and Au of Au/MIL100(Fe)/TiO₂. •OH are the reactive oxygen species. The degradation mechanism was further investigated via excitation-emission matrix fluorescence spectroscopy and LC-MS. This study provides new guidelines for the selective group-targeting removal of toxic pollutants with characteristic functional groups from complex water matrices.

Screening p-Phenylenediamine Antioxidants, Their Transformation Products, and Industrial Chemical Additives in Crumb Rubber and Elastomeric Consumer Products

Recently, roadway releases of N,N'-substituted p-phenylenediamine (PPD) antioxidants and their transformation products (TPs) received significant attention due to the highly toxic 6PPD-quinone. However, the occurrence of PPDs and TPs in recycled tire rubber products remains uncharacterized. Here, we analyzed tire wear particles (TWPs), recycled rubber doormats, and turf-field crumb rubbers for seven PPD antioxidants, five PPD-quinones (PPDQs), and five other 6PPD TPs using liquid chromatography-tandem mass spectrometry. PPD antioxidants, PPDQs, and other TPs were present in all samples with chemical profiles dominated by 6PPD, DTPD, DPPD, and their corresponding PPDQs. Interestingly, the individual [PPDQ]/[PPD] and [TP]/[PPD] ratios significantly increased as total concentrations of the PPD-derived chemical decreased, indicating that TPs (including PPDQs) dominated the PPD-derived compounds with increased environmental weathering. Furthermore, we quantified 15 other industrial rubber additives (including bonding agents, vulcanization accelerators, benzotriazole and benzothiazole derivatives, and diphenylamine antioxidants), observing that PPD-derived chemical concentrations were 0.5-6 times higher than these often-studied additives. We also screened various other elastomeric consumer products, consistently detecting PPD-derived compounds in lab stoppers, sneaker soles, and rubber garden hose samples. These data emphasize that PPD antioxidants, PPDQs, and related TPs are important, previously overlooked contaminant classes in tire rubbers and elastomeric consumer products.

A new bi-radical species formed during the photochemical degradation of synthetic musk tonalide in water: Study of in-situ laser flash photolysis and validation of synthesized standard sample

The ubiquitous presence of synthetic musks is causing serious concern due to the species produced from their transformation and environmental impacts. In this study, tonalide was selected as a representative synthetic musk to evaluate the transformation mechanism and pathway in water under ultraviolet (UV) irradiation. The results showed that tonalide could undergo rapid photochemical degradation through a new pivotal bi-radical, which acts as the initial active species. The bi-radicals with a typical absorption peak at 340 nm was observed by in-situ laser flash photolysis technology, and the absolute decay rate constant was obtained as 3.61 ± 0.01 × 10⁹ M^-1 s^-1 with the life-time of 83.3 ns. The photochemical degradation by-products of tonalide were also identified by high-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry, and the precise structures of key by-products have been validated by our preparative synthesized standard samples confirmed by nuclear magnetic resonance. Thus, the mechanism of tonalide photochemical degradation, continuous photoenolization of the bi-radicals and followed cycloaddition reaction with O₂, was proposed as the predominant pathway. The main degradation by-product, photoenol which has a higher bioconcentration than that of tonalide, was found to form from the bi-radicals photoenolization. This study is the first work to propose a new bi-radical as the photoenol precursors during photochemical degradation of tonalide in water.

Cytotoxicity of nitrogenous disinfection byproducts: A combined experimental and computational study

Nitrogenous disinfection byproducts (N-DBPs), such as halocetamides (HAcAms), haloacetonitriles (HANs) and halonitromethanes (HNMs), are emerging DBPs in drinking water. They are more toxic than currently regulated DBPs, attracting more attention to their toxic effects and mechanism. In this study, human embryonic kidney (HEK) 293T cells were employed to explore the cytotoxicity of 29 N-DBPs. The influence of molecular structures and different halogenations on cytotoxicity has been comparatively analyzed. As toxicity is the downstream of chemico-biological interactions, the thiol reactivity of 29 N-DBPs has thus been evaluated by using glutathione (GSH) as a model nucleophile, which is the most prevalent cellular thiol and acts as an antioxidant to protect cells by detoxifying electrophilic compounds. Results show that the cytotoxicity of N-DBPs follows by the order of HAcAms > HANs > HNMs, which is different from their reactivity with GSH (the median of k_GSH ranks as HNMs > HAcAms > HANs). However, a significant correlation (p < 0.001) between log k_GSH and log IC₅₀ (concentration causing 50% inhibition) has been respectively observed for HAcAms and HANs subset and HNMs subset, indicating such chemical reaction is a probable trigger for these DBPs to result in cytotoxicity. Finally, two separate quantitative structure - activity relationship (QSAR) models based on HANs & HAcAms subset and HNMs subset have been developed for estimating IC₅₀ values. The good statistical performance makes the models possible to quickly and accurately predict IC₅₀ values of other N-DBPs, providing basic data for their health risk assessment and greatly reducing in vivo and in vitro experiments.

A Simple and Practical Method for Fluence Determination in Bench-Scale UV-LED Setups

In UV disinfection of water, the fluence of UV required to inactivate a target microorganism is determined based on the procedures developed for conventional mercury-based UV lamps with collimation. In this regard, a simple and practical method with a mathematical model and radiometry is proposed for determining the fluence rate with UV light-emitting diodes (UV-LEDs). This method was applied to a bench-scale UV-LED setup and validated by comparing the calculations with the measurements using either a spectroradiometer or a chemical actinometer. The results showed high accordance with spectroradiometer outputs with a linear regression equation y = 0.997x (x: model calculation, y: spectroradiometer output, r²  = 0.999, P < 0.001 for n = 20) in an experiment varying the distance between the measurement points and the UV-LEDs. Meanwhile, the proposed method and chemical actinometry exhibited 98% concordance. Furthermore, this method was applied to determine the fluence-response profiles of Pseudomonas aeruginosa, and the results demonstrated that the proposed method was appropriate at two different distances between the UV-LEDs and the solutions. To conclude, the proposed method can determine the fluence in a UV-LED bench-scale setup in a simple and practical way, which would potentially promote the research and development of water treatment using UV-LEDs.

Tyre additive chemicals, tyre road wear particles and high production polymers in surface water at 5 urban centres in Queensland, Australia

Plastics pollution is a global issue impacting every part of our environment. Tyre road wear particle (TRWP) plastics pollution is thought to be one of the largest pollution sources in urban environments. These plastics are also of concern due to the presence of additive chemicals, incorporated during manufacture, that can be released into the surrounding environment. This study aimed to provide information on concentrations of a range of anthropogenic plastics related pollutants in the Australian environment through a scoping study of surface water in 5 key urban centres around Queensland, Australia. Samples were analysed for a suite of 15 common tyre additive chemicals, TRWPs and 6 common high production polymers, and included the new transformation product of concern 6PPD-quinone which has recent reports of causing mass mortality events in certain aquatic species. The additives were ubiquitously detected (2.9-1440 ng/L) with 6PPD-quinone concentrations lower than in previous studies (<0.05-24 ng/L) and TRWPs detected at 18 of the 21 sites ( Collapse

Key Words

• 6PPD-quinone
• Microplastics
• Surface water pollution
• Tyre tread

Collapse

MESH Headings

• Australia
• Environmental Monitoring
• Environmental Pollutants
• Plastics
• Polyethylenes
• Polymers
• Polypropylenes
• Queensland
• Water
• Water Pollutants, Chemical
• Phenylenediamines
• Benzoquinones

Collapse

Grants Collapse

Affiliation(s)

Cassandra Rauert Queensland Alliance for Environmental Health Sciences (QAEHS), The University of Queensland, 20 Cornwall Street, Woolloongabba, 4102, QLD, Australia.
Suzanne Vardy Water Quality and Investigation, Water Ecosystem Sciences, Science Division, Department of Environment and Science, Queensland Government, Dutton Park, QLD 4102, Australia
Benjamin Daniell Townsville City Council, Townsville, Australia
Nathan Charlton Queensland Alliance for Environmental Health Sciences (QAEHS), The University of Queensland, 20 Cornwall Street, Woolloongabba, 4102, QLD, Australia
Kevin V Thomas Queensland Alliance for Environmental Health Sciences (QAEHS), The University of Queensland, 20 Cornwall Street, Woolloongabba, 4102, QLD, Australia

Collapse

Identification and characterization of Fe3O4/peroxodisulfate advanced oxidation products from sulfameter

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe₃O₄/peroxodisulfate (PDS) oxidation system after the optimization of PDS concentration and pH. Meanwhile, it was found that a lot of unknown oxidation products were formed, which brought up the uncertainty of health risks to the environment, and the identification of these unknown products was critical. Therefore, SME was selected as the model compound, from which the oxidation products were never elucidated, to identify these intermediates/products. With liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS), 10 new products were identified, in which 2-amino-5-methoxypyrimidine (AMP) was confirmed by its standard. The investigation of the oxidation process of SME indicated that most of the products were not stable and the degradation pathways were very complicated as multiple reactions, such as oxidation of the amino group, SO₂ extrusion, and potential cross-reaction occurred simultaneously. Though most of the products were not verified due to the lack of standards, our results could be helpful in the evaluation of the treatment performance of SAs containing wastewater.

Promotion of Bladder Cancer Cell Metastasis by 2-Mercaptobenzothiazole via Its Activation of Aryl Hydrocarbon Receptor Transcription: Molecular Dynamics Simulations, Cell-Based Assays, and Machine Learning-Driven Prediction

2-Mercaptobenzothiazole (MBT) is an industrial chemical widely used for rubber products, corrosion inhibitors, and polymer materials with multiple environmental and exposure pathways. A growing body of evidence suggests its potential bladder cancer (BC) risk as a public health concern; however, the molecular mechanism remains poorly understood. Herein, we demonstrate the activation of the aryl hydrocarbon receptor (AhR) by MBT and reveal key events in carcinogenesis associated with BC. MBT alters conformational changes of AhR ligand binding domain (LBD) as revealed by 500 ns molecular dynamics simulations and activates AhR transcription with upregulation of AhR-target genes CYP1A1 and CYP1B1 to approximately 1.5-fold. MBT upregulates the expression of MMP1, the cancer cell metastasis biomarker, to 3.2-fold and promotes BC cell invasion through an AhR-mediated manner. MBT is further revealed to induce differentially expressed genes (DEGs) most enriched in cancer pathways by transcriptome profiling. The exposure of MBT at environmentally relevant concentrations induces BC risk via AhR signaling disruption, transcriptome aberration, and malignant cell metastasis. A machine learning-based model with an AUC value of 0.881 is constructed to successfully predict 31 MBT analogues. Overall, we provide molecular insight into the BC risk of MBT and develop an effective tool for rapid screening of AhR agonists.

Integrated estrogenic effects and semi-volatile organic pollutants profile in secondary and tertiary wastewater treatment effluents in North China

Endocrine-disrupting effects on aquatic organisms caused by wastewater discharging have raised extensive concerns. However, the efficiency of various wastewater treatment processes to remove estrogenic activity in effluents and the association with organic micropollutants was not well known. We evaluated the estrogenic activity using a well-characterized in vivo bioassay featuring the Chinese rare minnows (Gobiocypris rarus) and analyzed 886 semi-volatile organic compounds (SVOCs) in effluents from four secondary wastewater treatment plants (SWTP A-D) and a tertiary wastewater treatment plant (TTP E) that utilized various common treatment processes in northern China. The final effluents from SWTPs and TTP E all exhibited estrogenic effects, increasing male fish plasma vitellogenin (VTG) contents and estradiol/testosterone (E₂/T) ratios. Key regulating genes in the male fish liver including vtg1, vtg3, era, erβ, and cyp19a were upregulated. TTP E demonstrated high performance in reducing estrogenic activity in the effluents, with a reduction of 64% in integrative biomarkers of estrogenic response (IBR). UV disinfection at SWTPs removed IBR by 14%- 33%, while ozone disinfection at TTP E did not reduce IBR. Several SVOCs including alkanes, chlorobenzenes, and phthalates, detected at ng/L to µg/L level, significantly correlated with effluent estrogenic activity. Our findings suggest the necessity and the potential means to improve the efficiency of current wastewater treatment approaches to achieve better protection for aquatic organisms against the joint effects of mixtures of various categories of micropollutants in effluents.

Chemical Leaching from Tire Wear Particles with Various Treadwear Ratings

Physical friction between a tire and the road surface generates tire wear particles (TWPs), which are a source of microplastics and particulate matter. This study investigated the trends of chemical leaching from TWPs depending on the treadwear rating of the tire. A road simulator was used to produce TWPs from tires with various treadwear ratings. Liquid chromatography–tandem mass spectrometry was used to analyze the chemical leaching from TWPs, with a particular focus on benzothiazole and its derivative 2-hydroxy benzothiazole. However, chemical mapping via high-resolution tandem mass spectrometry detected another derivative: 2-mercaptobenzothiazole. The benzothiazole groups were observed to have different leaching tendencies, implying that using benzothiazole as a marker compound may lead to incorrect TWP quantitation. The results of this research also suggest that the ecotoxicological influence of TWPs can vary with the treadwear rating of a tire.

Novel chlorinated disinfection byproducts from tannic acid: nontargeted identification, formation pathways, and computationally predicted toxicity

Tannic acid is ubiquitously present in various simulated and real water sources and in wastewater. Various chlorinated disinfection byproducts (Cl-DBPs) are generated via reactions with tannic acid during disinfection with chlorine. We used high-resolution mass spectrometry in combination with our self-developed halogen extraction code to selectively identify Cl-DBPs. Our strategy enabled successful detection of 35 Cl-DBP formulas formed by chlorination of tannic acid, and we identified 26 of these structures. The structures of 17 novel Cl-DBPs are firstly reported here. The reaction pathways of these Cl-DBPs were tentatively proposed. These Cl-DBPs are likely to be generated during chlorination at various chlorine doses, from 0.0 to 10.0 mg-Cl₂/L, and 14 of the 26 Cl-DBPs were detected in simulated drinking water, which implies a relatively high probability of incidence. Quantitative structure-activity relationship toxicity analyses predicted that most of these Cl-DBPs would exhibit much higher acute toxicity than the common DBPs trichloromethane and monochloroacetic acid and that some of these compounds would induce developmental toxicity and be mutagenic, which further emphasizes that these Cl-DBPs should raise concerns. This study broadens our understanding of the Cl-DBPs formed from tannic acid and should prompt wider application of our analytical strategy in environmental matrices.

Identification of unknown disinfection byproducts in drinking water produced from Taihu Lake source water

Although disinfection byproducts (DBPs) in drinking water have been suggested as a cancer causing factor, the causative compounds have not yet been clarified. In this study, we used liquid chromatography quadrupole-time-of-flight spectrometry (LC-QTOF MS) to identify the unknown disinfection byproducts (DBPs) in drinking water produced from Taihu Lake source water, which is known as a convergence point for the anthropogenic pollutants discharged from intensive industrial activities in the surrounding regions. In total, 91 formulas of DBPs were discovered through LC-QTOF MS nontarget screen, 81 of which have not yet been reported. Among the 91 molecules, 56 only contain bromine, 15 only contain chlorine and 20 DBPs have both bromine and chlorine atoms. Finally, five DBPs including 2,4,6-tribromophenol, 2,6-dibromo-4-chlorophenol, 2,6-dichloro-4-bromophenol, 4-bromo-2,6-di-tert-butylphenol and 3,6-dibromocarbazole were confirmed using standards. The former three compounds mainly formed in the predisinfection step (maximum concentration, 0.2-2.6 µg/L), while the latter two formed in the disinfection step (maximum concentration, 18.2-33.6 ng/L). In addition, 19 possible precursors of the discovered DBPs were detected, with the aromatic compounds being a major group. 2,6-di-tert-butylphenol as the precursor of 4-bromo-2,6-di-tert-butylphenol was confirmed with standard, with a concentration of 20.3 µg/L in raw water. The results of this study show that brominated DBPs which are possibly formed from industrial pollutants are relevant DBP species in drinking water produced form Taihu source water, suggesting protection of Taihu Lake source water is important to control the DBP risks.

Screening of organic chemicals in surface water of the North River by high resolution mass spectrometry

Wide use of various chemicals has resulted in water pollution, which has become a global environmental concern. So far limited information is available on what chemicals in our water. Here we investigated the occurrence and profiles of organic chemicals in the North River, South China by applying non-target screening analysis with high resolution mass spectrometry. A total of 402 organic chemicals belonging to eleven categories were identified in the North River, with notable presence of industrial chemicals, pharmaceuticals and pesticides. Among these detected chemicals, over half of the tentatively identified compounds were rarely reported in the surface water, with a few compounds, e.g., sisomicin, simeton, 2-methyl-4,6-dinitrophenol, xanthurenic acid and indole-3-carboxylic acid that have never been documented in the North River before, while the metabolites like 4-acetamidoantipyrine were also observed. The maximum concentration of the identified chemicals in the North River was above 300 ng/L (Sulfamonomethoxine). Principle component analysis results of the obtained dataset showed significant seasonal distribution, which could be linked to variations in wastewater discharge, river dilution and anthropogenic activities such as pesticide spray. Agricultural activities in the upper reaches led to detection of various pesticides in the river basin, especially in the wet season. The findings from this study demonstrated the widespread presence of chemicals in our waterway, and further retrospective analysis would reveal more information about chemicals of emerging concern.

Efficient degradation of various emerging pollutants by wild type and evolved fungal DyP4 peroxidases

The accumulation of emerging pollutants in the environment remains a major concern as evidenced by the increasing number of reports citing their potential risk on environment and health. Hence, removal strategies of such pollutants remain an active area of investigation. One way through which emerging pollutants can be eliminated from the environment is by enzyme-mediated bioremediation. Enzyme-based degradation can be further enhanced via advanced protein engineering approaches. In the present study a sensitive and robust bioanalytical liquid chromatography-tandem mass spectrometry (LCMSMS)-based approach was used to investigate the ability of a fungal dye decolorizing peroxidase 4 (DyP4) and two of its evolved variants—that were previously shown to be H₂O₂ tolerant—to degrade a panel of 15 different emerging pollutants. Additionally, the role of a redox mediator was examined in these enzymatic degradation reactions. Our results show that three emerging pollutants (2-mercaptobenzothiazole (MBT), paracetamol, and furosemide) were efficiently degraded by DyP4. Addition of the redox mediator had a synergistic effect as it enabled complete degradation of three more emerging pollutants (methyl paraben, sulfamethoxazole and salicylic acid) and dramatically reduced the time needed for the complete degradation of MBT, paracetamol, and furosemide. Further investigation was carried out using pure MBT to study its degradation by DyP4. Five potential transformation products were generated during the enzymatic degradation of MBT, which were previously reported to be produced during different bioremediation approaches. The current study provides the first instance of the application of fungal DyP4 peroxidases in bioremediation of emerging pollutants.

Concentrations of Tire Additive Chemicals and Tire Road Wear Particles in an Australian Urban Tributary

Tire road wear particles (TRWPs) are one of the largest sources of microplastics to the urban environment with recent concerns as they also provide a pathway for additive chemicals to leach into the environment. Stormwater is a major source of TRWPs and associated additives to urban surface water, with additives including the antioxidant derivative N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-quinone) demonstrating links to aquatic toxicity at environmentally relevant concentrations. The present study used complementary analysis methods to quantify both TRWPs and a suite of known tire additive chemicals (including 6PPD-quinone) to an urban tributary in Australia during severe storm events. Concentrations of additives increased more than 40 times during storms, with a maximum concentration of 2760 ng/L for ∑15additives, 88 ng/L for 6PPD-quinone, and a similar profile observed in each storm. TRWPs were detected during storm peaks with a maximum concentration between 6.4 and 18 mg/L, and concentrations of TRWPs and all additives were highly correlated. Contaminant mass loads to this catchment were estimated as up to 100 g/storm for ∑15additives, 3 g/storm for 6PPD-quinone, and between 252 and 730 kg of TRWPs/storm. While 6PPD-quinone concentrations in this catchment were lower than previous studies, elevated concentrations post storm suggest prolonged aquatic exposure.

A Compendium of the Most Promising Synthesized Organic Compounds against Several Fusarium oxysporum Species: Synthesis, Antifungal Activity, and Perspectives

Vascular wilt caused by F. oxysporum (FOX) is one of the main limitations of producing several agricultural products worldwide, causing economic losses between 40% and 100%. Various methods have been developed to control this phytopathogen, such as the cultural, biological, and chemical controls, the latter being the most widely used in the agricultural sector. The treatment of this fungus through systemic fungicides, although practical, brings problems because the agrochemical agents used have shown mutagenic effects on the fungus, increasing the pathogen's resistance. The design and the synthesis of novel synthetic antifungal agents used against FOX have been broadly studied in recent years. This review article presents a compendium of the synthetic methodologies during the last ten years as promissory, which can be used to afford novel and potential agrochemical agents. The revision is addressed from the structural core of the most active synthetic compounds against FOX. The synthetic methodologies implemented strategies based on cyclo condensation reactions, radical cyclization, electrocyclic closures, and carbon-carbon couplings by metal-organic catalysis. This revision contributes significantly to the organic chemistry, supplying novel alternatives for the use of more effective agrochemical agents against F. oxysporum.

Efficient Degradation of 2-Mercaptobenzothiazole and Other Emerging Pollutants by Recombinant Bacterial Dye-Decolorizing Peroxidases

In recent years, concerns are being raised about the potential harmful effects of emerging pollutants (EPs) on human and aquatic lives. Extensive research is being conducted on developing efficient remediation strategies to target this new class of toxic pollutants. Studies focused on biological (enzyme-based) methods have shown potential as greener and possibly more economical alternatives to other treatment approaches, such as chemical methods. The current study focused on the use of recombinantly produced novel bacterial peroxidases, namely dye-decolorizing peroxidases (DyPs), to study their effectiveness in degrading a number of diverse EPs. In this context, a sensitive bioanalytical Liquid chromatography-tandem mass spectrometry (LCMSMS)-based method was developed to simultaneously detect a mixture of 31 EPs and to examine their degradability by a panel of seven different recombinant bacterial DyPs (rDyPs). We show that up to 9 of the 31 tested EPs could be degraded by at least one of the DyPs tested. The results also indicated that not all rDyPs behaved similarly in their abilities to degrade EPs, as some rDyPs (such as SviDyP and CboDyP) showed a promising potential to degrade EPs while others (such as ScDyP) were almost ineffective. Additionally, the role of redox mediators for effective emerging pollutant degradation by rDyPs was also examined, which showed dramatic improvement in the DyP-mediated degradation of five different EPs. Detailed analysis of 2-mercaptobenzothiazole degradation by SviDyP showed that six distinct breakdown products were generated. The present study showed for the first time that recombinant bacterial DyPs can be used for wastewater remediation by degrading a range of different EPs.