Electroconductive moving bed membrane bioreactor (EcMB-MBR) for single-step decentralized wastewater treatment: Performance, mechanisms, and cost

Treatment of azo dye-containing wastewater in a combined UASB-EMBR system: Performance evaluation and membrane fouling study

This work investigated the treatment of azo dye-containing wastewater in an upflow anaerobic sludge blanket (UASB) reactor combined with an electro-membrane bioreactor (EMBR). Current densities of 20 A m-2 and electric current exposure mode of 6'ON/30'OFF were applied to compare the performance of the EMBR to a conventional membrane bioreactor (MBR). The results showed that dye (Drimaren Red CL-7B) removal occurred predominantly in the UASB reactor, which accounted for 57% of the total dye removal achieved by the combined system. When the MBR was assisted by electrocoagulation, the overall azo dye removal efficiency increased from 60.5 to 67.1%. Electrocoagulation batch tests revealed that higher decolorization rates could be obtained with a current density of 50 A m-2. Over the entire experimental period, the combined UASB-EMBR system exhibited excellent performance in terms of chemical oxygen demand (COD) and NH4+-N removal, with average efficiencies above 97%, while PO43--P was only consistently removed when the electrocoagulation was used. Likewise, a consistent reduction in the absorption spectrum of aromatic amines was observed when the MBR was electrochemically assisted. In addition to improving the pollutants removal, the use of electrocoagulation reduced the membrane fouling rate by 68% (0.25-0.08 kPa d-1), while requiring additional energy consumption and operational costs of 1.12 kWh m-3 and 0.32 USD m-3, respectively. Based on the results, it can be concluded that the combined UASB-EMBR system emerges as a promising technological approach for textile wastewater treatment.

Mechanisms and Strategies of Advanced Oxidation Processes for Membrane Fouling Control in MBRs: Membrane-Foulant Removal versus Mixed-Liquor Improvement

Membrane bioreactors (MBRs) are well-established and widely utilized technologies with substantial large-scale plants around the world for municipal and industrial wastewater treatment. Despite their widespread adoption, membrane fouling presents a significant impediment to the broader application of MBRs, necessitating ongoing research and development of effective antifouling strategies. As highly promising, efficient, and environmentally friendly chemical methods for water and wastewater treatment, advanced oxidation processes (AOPs) have demonstrated exceptional competence in the degradation of pollutants and inactivation of bacteria in aqueous environments, exhibiting considerable potential in controlling membrane fouling in MBRs through direct membrane foulant removal (MFR) and indirect mixed-liquor improvement (MLI). Recent proliferation of research on AOPs-based antifouling technologies has catalyzed revolutionary advancements in traditional antifouling methods in MBRs, shedding new light on antifouling mechanisms. To keep pace with the rapid evolution of MBRs, there is an urgent need for a comprehensive summary and discussion of the antifouling advances of AOPs in MBRs, particularly with a focus on understanding the realizing pathways of MFR and MLI. In this critical review, we emphasize the superiority and feasibility of implementing AOPs-based antifouling technologies in MBRs. Moreover, we systematically overview antifouling mechanisms and strategies, such as membrane modification and cleaning for MFR, as well as pretreatment and in-situ treatment for MLI, based on specific AOPs including electrochemical oxidation, photocatalysis, Fenton, and ozonation. Furthermore, we provide recommendations for selecting antifouling strategies (MFR or MLI) in MBRs, along with proposed regulatory measures for specific AOPs-based technologies according to the operational conditions and energy consumption of MBRs. Finally, we highlight future research prospects rooted in the existing application challenges of AOPs in MBRs, including low antifouling efficiency, elevated additional costs, production of metal sludge, and potential damage to polymeric membranes. The fundamental insights presented in this review aim to elevate research interest and ignite innovative thinking regarding the design, improvement, and deployment of AOPs-based antifouling approaches in MBRs, thereby advancing the extensive utilization of membrane-separation technology in the field of wastewater treatment.

In situ cleaning of foulants by gas scouring on the membrane-electrode in an electro-membrane bioreactor

Low-maintenance membrane cleaning is essential for the stable operation of membrane bioreactors. This work proposes an in-situ electrical-cleaning method using an electro-MBR. When the applied bias was transiently increased, the membrane flux recovered rapidly because of the scouring effect from gas evolution reactions. The exfoliation of the cake layer induced by gas scouring played a major role in mitigating membrane fouling, recovering the transmembrane pressure (TMP) by 88.6 % under optimal conditions. Membrane modules did not require replacement during the operation period due to the efficacy of electrical cleaning, with the TMP varying between 37.5 % and 62.5 % of the ultimate pressure requiring change of the membrane modules. Despite the increase in power consumption of 0.66 Wh·m-3 due to the additional applied bias, there was no need for chemical additives or manual maintenance. Therefore, the electrical cleaning method enhanced the service life and reduced the maintenance costs of the electro-MBR.

Biogas upgrading and membrane anti-fouling mechanisms in electrochemical anaerobic membrane bioreactor (EC-AnMBR): Focusing on spatio-temporal distribution of metabolic functionality of microorganisms

Electrochemical anaerobic membrane bioreactor (EC-AnMBR) by integrating a composite anodic membrane (CAM), represents an effective method for promoting methanogenic performance and mitigating membrane fouling. However, the development and formation of electroactive biofilm on CAM, and the spatio-temporal distribution of key functional microorganisms, especially the degradation mechanism of organic pollutants in metabolic pathways were not well documented. In this work, two AnMBR systems (EC-AnMBR and traditional AnMBR) were constructed and operated to identify the role of CAM in metabolic pathway on biogas upgrading and mitigation of membrane fouling. The methane yield of EC-AnMBR at HRT of 20 days was 217.1 ± 25.6 mL-CH4/g COD, about 32.1 % higher compared to the traditional AnMBR. The 16S rRNA analysis revealed that the EC-AnMBR significantly promoted the growth of hydrolysis bacteria (Lactobacillus and SJA-15) and methanogenic archaea (Methanosaeta and Methanobacterium). Metagenomic analysis revealed that the EC-AnMBR promotes the upregulation of functional genes involved in carbohydrate metabolism (gap and kor) and methane metabolism (mtr, mcr, and hdr), improving the degradation of soluble microbial products (SMPs)/extracellular polymeric substances (EPS) on the CAM and enhancing the methanogens activity on the cathode. Moreover, CAM biofilm exhibits heterogeneity in the degradation of organic pollutants along its vertical depth. The bacteria with high hydrolyzing ability accumulated in the upper part, driving the feedstock degradation for higher starch, sucrose and galactose metabolism. A three-dimensional mesh-like cake structure with larger pores was formed as a biofilter in the middle and lower part of CAM, where the electroactive Geobacter sulfurreducens had high capabilities to directly store and transfer electrons for the degradation of organic pollutants. This outcome will further contribute to the comprehension of the metabolic mechanisms of CAM module on membrane fouling control and organic solid waste treatment and disposal.

Subtle magnesium liberation of self-fabricated functional filler actuates highly efficient phosphorus removal from source-separated urine by SBBR

Domestic wastewater source-separated treatment has attracted wide attention due to the efficiency improvement of sewage treatment systems, energy saving, resource reuse, and the construction and operation cost saving of pipeline networks. Nonetheless, the excess source-separated urine still demands further harmless treatment. Sequencing batch biofilm reactor (SBBR), a new type of composite biofilm reactor developed by filling different fillers into the sequential batch reactor (SBR) reactor, has higher pollutant removal performance and simpler operation and maintenance. However, the phosphorus removal ability of the SBBR filling with conventional fillers is still limited and needs further improvement. In this study, we developed two new fillers, the self-fabricated filler A and B (SFA/SFB), and compared their source-separated urine treatment performance. Long-term treatment experimental results demonstrated that the SBBR systems with different fillers had good removal performance on the COD and TN in the influent, and the removal rate increased with the increasing HRT. However, only the SBBR system with the SFA showed excellent PO43--P and TP removal performance, with the removal rates being 83.7 ± 11.9% and 77.3 ± 13.7% when the HRT was 1 d. Microbial community analysis results indicated that no special bacteria with strong phosphorus removal ability were present on the surface of the SFA. Adsorption experimental results suggested that the SFA had better adsorption performance for phosphorus than the SFB, but it could not always have stronger phosphorus adsorption and removal performance during long-term operation due to the adsorption saturation. Through a series of characterizations such as SEM, XRD, and BET, it was found that the SFA had a looser structure due to the use of different binder and production processes, and the magnesium in the SFA gradually released and reacted with PO43- and NH4+ in the source-separated urine to form dittmarite and struvite, thus achieving efficient phosphorus removal. This study provides a feasible manner for the efficient treatment of source-separated urine using the SBBR system with self-fabricated fillers.

Impacts of electric field-magnetic powder coupled membrane bioreactor on phenol wastewater treatment: Performance, synergistic mechanism, antibiotic resistance genes, and eco-environmental benefit evaluation

A novel electric field-magnetic powder coupled membrane bioreactor (EM-MBR) was constructed, which was superior on improvement of phenol treatment performance and sludge characteristics, and mitigation of membrane fouling. EM-MBR enhanced the phenol degradation via the improvement activity of phenol degrading enzymes. The EPS contents and SVI of EM-MBR were significantly reduced by 49.3 % and 58.7 % than that of the conventional MBR, respectively. Moreover, EM-MBR successfully reduced fouling rate by 57.0 %, delaying the membrane resistance. The EPS contents were positively correlated with the SVI and fouling rate, implying that the sludge settleability was strengthened by improving the properties of EPS with the assistance of electromagnetic, thus mitigating the membrane fouling. Microbial co-occurrence network demonstrated that EM-MBR enriched phenol-degrading and EPS-degrading genera correlated to Fe redox cycle. Furthermore, the activation of the antioxidant system in the EM-MBR resulted in the suppression of reactive oxygen species (ROS) generation, consequently impeding the dissemination of antibiotic resistance genes (ARGs). Co-occurrence patterns of MGEs and ARGs revealed that intercellular binding facilitated by ist and Integrase may account for the horizontal transfer of ARGs. The reduction of unit capital costs (15.63 %), running costs (53.00 %), and total average carbon emissions (15.18 %) indicated that EM-MBR was environmentally beneficial.

Performance analysis of microbial fuel cell - membrane bioreactor with reduced graphene oxide enhanced polypyrrole conductive ceramic membrane: Wastewater treatment, membrane fouling and microbial community under high salinity

The application of membrane bioreactor (MBR) in high salinity wastewater treatment was mainly hindered by membrane fouling. Microbial fuel cell (MFC)-MBR coupling system was established to alleviate membrane fouling and save energy. Reduced graphene oxide/polypyrrole ceramic membrane (rGO/PPy CM) with high conductivity and stability was innovatively placed in MFC-MBRs as both cathode and filter, with PPy CM, rGO/PPy CM and CM placed in other reactors. MFC-MBR (rGO/PPy) and MFC-MBR (PPy) achieved higher pollutant removal efficiencies (90.73 % and 90.45 % for TOC, 87.22 % and 86.56 % for NH4+-N, respectively) and superior anti-fouling performance (1.86 and 1.93 kPa/d for average membrane fouling rates) than both conventional MBRs (CMBRs). The stable voltage generation was around 287 and 242 mV, respectively. Through high throughput sequencing, electric field showed a positive correlation with the abundance and activity of most dominant phylum (Bacteroidetes, Chloroflexi, Actinobacteria, and Firmicutes) and functional genes (amoA, hao, narG, napA, nirK, norB, and nosZ), thereby improving pollutant removal efficiency. The higher conductivity of rGO/PPy CM resulted in enhanced electric field intensity, leading to superior performance of anti-fouling and pollutant removal. This study inventively explored the effects of conductive membrane property on electricity generation performance, microbial community, pollutant removal and membrane fouling, providing theoretical support for the selection of electrode materials in MFC-MBR.

Nickel-hydroxide-encapsulated polyacrylamide as a novel adsorptive composite for the capture of methylene blue from wastewater

The wastewater released from different industries is a major environmental issue that has grabbed significant attention lately. Thus, the implementation of suitable routes for the treatment of such water is strongly recommended to reach the level of possible reuse for either industrial or agricultural purposes. In line with such a concept, this research work introduces a new composite structure made via the coating of polyacrylamide by loading nickel hydroxide nanoparticles for use as an absorbent for the purification of wastewater from dye contaminants. High internal phase emulation (HIPE) polymerization was utilized to first prepare particles of polyacrylamide followed by their coating with particles of nickel hydroxide to ultimately obtain the designated adsorbent. The structural features and chemical composition of the synthesized composite were confirmed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and energetic dispersive X-ray (EDX) spectroscopy. Additionally, scanning electron microscopy (SEM) and N2 adsorption-desorption surface area analysis were employed to detect the textural characteristics of the composite. Subsequently, the efficiency of this structure, as an adsorbent for the disposal of methylene blue dye species from a wastewater sample, was studied. During the water purification process, several operating parameters, namely, retention time, solution pH, initial concentration, and absorbent dose, were investigated. The presented Ni-polyacrylamide composite achieved the promising removal of methylene blue dye. An increased adsorption capacity of 14.3 mg g-1 toward methylene blue was achieved by the composite, thanks to the presence of both organic and inorganic functional groups within its structure. Kinetic and isotherm studies for the adsorption of methylene blue species were found to fit pseudo-second-order and Langmuir models. Additionally, thermodynamic measurements indicated that the adsorption process of methylene blue is feasible, spontaneous, involves physisorption, and is endothermic.

An overview of recent advances and future prospects of three-dimensional biofilm electrode reactors (3D-BERs)

Three-dimensional biofilm electrode reactors (3D-BERs) have attracted extensive attention in recent years due to their wide application range, high efficiency and energy saving. On the basis of traditional bio-electrochemical reactor, 3D-BERs are filled with particle electrodes, also known as the third electrodes, which can not only be used as a carrier for microbial growth, but also improve the electron transfer rate of the whole system. This paper reviews the constitution, advantages and basic principles of 3D-BERs as well as current research status and progress of 3D-BERs in recent years. The selection of electrode materials, including cathode, anode and particle electrode are listed and analyzed. Different constructions of reactors, like 3D-unipolar extended reactor and coupled 3D-BERs are introduced and discussed. Various contaminants degraded by 3D-BERs including nitrogen, azo dyes, antibiotics and the others are calculated and the corresponding degradation effects are described. The influencing factors and mechanisms are also introduced. At the same time, according to the research advances of 3D-BERs, the shortcomings and weakness of this technology in the current research process are analyzed, and the future research direction of this technology is prospected. This review aims to summarize recent studies of 3D-BERs in bio-electrochemical reaction and open a bright window to this booming research theme.

A novel reduced graphene oxide/polypyrrole conductive ceramic membrane enhanced electric field membrane bioreactor: Mariculture wastewater treatment performance and membrane fouling mitigation

A novel electric field membrane bioreactor (EMBR) for mariculture wastewater treatment utilizing reduced graphene oxide/polypyrrole ceramic membrane (rGO/PPy CM) was constructed and compared with MBRs using CM support and rGO/PPy CM. EMBR (rGO/PPy) obtained the highest pollutant removal rates (84.99% for TOC, 85.98% for NH₄⁺-N), the lowest average membrane fouling rate (2.42 kPa/d) and pollutant adhesion performance by characterization. Meanwhile, the specific fluxes of characteristic foulants in EMBR were enhanced, and the total resistances were reduced by 8.12% to 62.46%. The underlying mechanisms included reduced attraction energy and improved electrostatic repulsion between contaminants in EMBR and membrane by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, DLVO model and force analysis. Therefore, this study complemented the understanding of antifouling effect and mechanism in EMBR by interaction energy and force analysis of characteristic pollutants. These findings also provided new insights into the application of EMBR for mariculture wastewater treatment.

Near dissolved organic matter microfiltration (NDOM MF) coupled with UVC LED disinfection to maximize the efficiency of water treatment for the removal of Giardia and Cryptosporidium

Microfiltration (MF) membranes with a mean pore size same as or smaller than 0.45 µm have been typically used to separate pathogenic protozoa in water since materials larger than 0.45 µm are considered particulates. However, 0.45 µm is too small to separate protozoa which are 4-6 µm (Cryptosporidium oocyst) or 8-15 µm (Giardia cyst) in size. In this study, we optimized the mean pore size of MF membranes to maximize the producibility and guarantee a high removal rate simultaneously and proposed the membrane filtration using an MF membrane with an optimum mean pore size larger than but close to dissolved organic matter (DOM), which is called near DOM MF (NDOM MF). According to the MF test using polystyrene surrogate beads with diameters of 3 and 8 µm, an MF membrane with a 0.8 µm mean pore size was the best in that it showed 52% to 146% higher water fluxes than a 0.45 µm MF membrane while maintaining the removal rate at 3-4 log. It was also the case for a low-temperature MF test, revealing the NDOM MF is highly effective regardless of temperature changes. Lastly, we tried to find the possibility of combining the NDOM MF with disinfection by an ultraviolet light emitting diode (UVC LED) to further guarantee the high quality of treated water while providing high process efficiency.

Safe purification of rural drinking water by biological aerated filter coupled with ultrafiltration

Water resources of many rural areas are usually lakes or reservoirs, which can be easily affected by run-off, non-point source pollution and are often of poorer quality compared with urban water sources. Drinking water supply in remote rural areas usually suffers from various challenges, such as the high cost of construction and maintenance of centralized drinking water treatment plants and pipe networks, due to the dispersed nature of villages, which are often located in varied and complex topographies. In this study, a combined process comprising biological aerated filter (BAF) combined with ultrafiltration was developed to treat polluted reservoir water. Organic matter indexes, turbidity, and chroma were used as indicators for the evaluation of the system performance. In a long-term experiment lasting 260 days, the combined process was tested under different values of critical operational parameters, including filler types and empty bed contact time (EBCT). Furthermore, the microbial communities in different BAF reactors were carefully evaluated at different times, finding that microorganisms with specific functions were enriched in the various BAF reactors. The combined process reached 85.5 % removal rate of DOC with an EBCT of 45 min and using granule active carbon (GAC) as filler. Most of the effluents of BAF reactors met the requirements for drinking water in China. The combined system showed practical potential for polluted water treatment in some rural areas.

Effects of solid retention time and exposure mode to electric current on Remazol Brilliant Violet removal in an electro-membrane bioreactor

The performance of an electrochemically assisted anoxic-oxic membrane bioreactor (A/O-eMBR) was assessed as an alternative for azo dye (Remazol Brilhant Violet (RBV)) removal from simulated textile wastewater. The A/O-eMBR was operated under three experimental conditions (runs I, II, and III), in which different solids retention time (SRT) (45 and 20 d) and exposure mode to electric current (6'ON/30'OFF and 6'ON/12'OFF) were assessed. The reactor exhibited excellent decolorization performance for all runs, with average dye removal efficiency ranging from 94.3 to 98.2%. Activity batch assays showed that the dye removal rate (DRR) decreased from 16.8 to 10.2 mg RBV L^-1 h^-1 when the SRT was reduced from 45 to 20 d, likely attributed to the lower biomass content under lower sludge age. At the electric current exposure mode of 6' ON/12'OFF, a more substantial decrease of DRR to 1.5 mg RBV L^-1 h^-1 was noticed, suggesting a possible inhibitory effect on dye removal via biodegradation. By reducing the SRT to 20 d, a worse mixed liquor filterability condition was observed, with a membrane fouling rate (MFR) of 0.979 kPa d^-1. In contrast, using the electric current exposure mode of 6'ON/12'OFF resulted in lower membrane fouling propensity, with an MFR of 0.333 kPa d^-1. A more attractive cost-benefit ratio for dye removal was obtained using the exposure mode of 6'ON/30'OFF, for which the energy demand was estimated at 21.9-22.6 kWh kg dye^-1 removed, almost two times lower than that observed for the mode of 6'ON/12'OFF.

Wastewater reclamation trends in Thailand

Thailand constantly faces the problem of water scarcity, resulting from an imbalance between available water supply and increasing water demand for economic and community expansion, as well as climate change. To address this shortage, wastewater reclamation is being planned and implemented throughout the country, along with a 20-year, long-term integrated water resource management plan. Significant opportunities from municipal wastewater treatment plants (WWTPs) are dependent on the following factors: the establishment of a reuse water framework and a tangible target for treated wastewater set by local government authorities; widespread recognition and adaptation of wastewater reuse measures in the agriculture, industry, tourism and service sectors regarding climate change and water stress; and the implementation of joint investment water reuse projects between private and government agencies. However, wastewater reclamation faces some significant challenges, specifically: the limitations of regulation and monitoring for specific reuse purposes; a lack of public confidence in the water quality; the limited commercial development of reclaimed wastewater research; and difficulties in self-sustaining business models through adapting circular economy principles. This study aims to provide an overview of the wastewater reclamation, present research trends, currently operating WWTPs as well as opportunities and challenges to speed up water reuse activities in Thailand.

Performance enhancement, membrane fouling mitigation and eco-friendly strategy by electric field coupled membrane bioreactor for treating mariculture wastewater

An eco-friendly strategy for mariculture wastewater treatment using an electric field attached membrane bioreactor (E-MBR) was evaluated and compared with a conventional membrane bioreactor (C-MBR). The removal efficiencies of total nitrogen (TN) and chemical oxygen demand (COD) increased significantly and the membrane fouling rate reduced by 44.8% in the E-MBR. The underlying mechanisms included the enriched nitrifiers and denitrifiers, the enhanced salinity-resistance, the increased activities and upregulated genes of key enzymes involved in nitrification and denitrification for improving the performance of mariculture wastewater treatment, and the enriched extracellular polymeric substance (EPS)-degrading genera, the downregulated EPS biosynthesis genes, the repressed biofilm-forming bacteria, the enhanced zeta potential absolute value and the generated H₂O₂ for membrane fouling mitigation by electrical stimulation. Compared with the C-MBR, the energy consumption, carbon emissions, and nitrogen footprint were reduced. These findings provide novel insights into mariculture wastewater treatment using an applied electric field.

Electrochemical impedance spectroscopy (EIS) reveals the role of microbial fuel cell-ceramic membrane bioreactor (MFC-CMBR): Electricity utilization and membrane fouling

Ceramic membrane has become a major concern due to creasing cost and competitive efficiency. Microbial fuel cell-ceramic membrane bioreactor (MFC-CMBR) is considered alternative technology for larger-scale industrial application because of its advantages of convenient detecting and control of membrane fouling. However, MFC-CMBR are highly susceptible to membrane fouling and harsh operating requirements in these wastewaters of different compositions. This research critically discusses that electrochemical response in different types of MFC-CMBRs and control of electricity utilization on ceramic membrane fouling. The experimental results indicated that the application of sludge acclimated in coupling system with higher external resistance could ensure that lower costs (electricity utilization and membrane cleaning) provided enough membrane fouling control. The improved performance of MFC-CMBR-1 could be attributed to its enhanced nitrification/denitrification activity and capacity of electrons migration between electrode and sludge mixture. The coupling system alleviated membrane fouling and impedance increasing by improving the characteristics of sludge (increased particle size, decreased adsorption adhesion free energy), EPS (decreased hydrophobicity, molecular weight distribution regulation). And filtration tests showed that roughness and contact angle for the MFC-CMBR tend for better development compared to CMBR, dependent on the changes in the chemical surface groups as a result of electric distribution ratio. In addition, correlation analysis and filtration experiments showed that the extracellular polymer substances (EPS) enhanced the charge transfer resistance (R_ct), and the protein substance in EPS was the main fouling substance when external resistance was close to the internal resistance of MFC. In summary, the low internal resistance of ceramic membrane lead to obvious better fouling control and electricity utilization than organic membrane, and the paper provides insight into the MFC-CMBR systems for a wide range of detecting membrane fouling and applications of membrane fouling mitigation.

Three-dimensional biofilm electrode reactors (3D-BERs) for wastewater treatment

Three-dimensional biofilm electrode reactors (3D-BERs) are highly efficient in refractory wastewater treatment. In comparison to conventional bio-electrochemical systems, the filled particle electrodes act as both electrodes and microbial carriers in 3D-BERs. This article reviews the conception and basic mechanisms of 3D-BERs, as well as their current development. The advantages of 3D-BERs are illustrated with an emphasis on the synergy of electricity and microorganisms. Electrode materials utilized in 3D-BERs are systematically summarized, especially the critical particle electrodes. The configurations of 3D-BERs and their integration with wastewater treatment reactors are introduced. Operational parameters and the adaptation of 3D-BERs to varieties of wastewater are discussed. The prospects and challenges of 3D-BERs for wastewater treatment are then presented, and the future research directions are proposed. We believe that this timely review will help to attract more attentions on 3D-BERs investigation, thus promoting the potential application of 3D-BERs in wastewater treatment.