Ultrasound-enhanced coagulation for Microcystis aeruginosa removal and disinfection by-product control during subsequent chlorination

Improving Microcystis aeruginosa removal efficiency through enhanced sonosensitivity of nitrogen-doped nanodiamonds

Traditional methods for algae removal in drinking water treatment, such as coagulation and sedimentation, face challenges due to the negative charge on algae cells' surfaces, resulting in ineffective removal. Ultrasonic cavitation has shown promise in enhancing coagulation performance by disrupting extracellular polymer structures and improving cyanobacteria removal through various mechanisms like shear force and free radical reactions. However, the short lifespan and limited mass transfer distance of free radicals in conventional ultrasonic treatment lead to high energy consumption, limiting widespread application. To overcome these limitations and enhance energy efficiency, advanced carbon-based materials were developed and tested. Nitrogen-doped functional groups on nanodiamond surfaces were found to boost sonosensitivity by increasing the production of reactive oxygen species at the sonosensitizer-water interface. Utilizing low-power ultrasound (0.12 W/mL) in combination with N-ND treatment for 5 min, removal rates of Microcystis aeruginosa cells in water exceeded 90 %, with enhanced removal of algal organic matters and microcystins in water. Visualization through confocal microscopy highlighted the role of positively charged nitrogen-doped nanodiamonds in aggregating algae cells. The synergy between cell capturing and catalysis of N-ND indicates that efficient mass transfer of free radicals from the sonosensitizer's surface to the microalgae's surface is critical for promoting cyanobacteria floc formation. This study underscores the potential of employing a low-intensity ultrasound and N-ND system in effectively improving algae removal in water treatment processes.

Discovery of two novel bioactive algicidal substances from Brevibacillus sp. via metabolomics profiling and back-validation

Identifying potent bacterial algicidal agents is essential for the development of effective, safe, and economically viable algaecides. Challenges in isolating and purifying these substances from complex secretions have impeded progress in this field. Metabolomics profiling, an efficient strategy for identifying metabolites, was pioneered in identifying bacterial algicidal substances in this study. Extracellular secretions from different generations of the algicidal bacterium Brevibacillus sp. were isolated for comprehensive analysis. Specifically, a higher algicidal efficacy was observed in the secretion from Generation 3 (G3) of Brevibacillus sp. compared to Generation 1 (G1). Subsequent metabolomics profiling comparing G3 and 1 revealed 83 significantly up-regulated metabolites, of which 9 were identified as potential algicidal candidates. Back-validation highlighted the potency of 4-acetamidobutanoic acid (4-ABC) and 8-hydroxyquinoline (8-HQL), which exhibited robust algicidal activity with 3d-EC50 values of 6.40 mg/L and 92.90 µg/L, respectively. These substances disrupted photosynthetic activity in M. aeruginosa by ceasing electron transfer in PSⅡ, like the impact exerted by Brevibacillus sp. secretion. These findings confirmed that 4-ABC and 8-HQL were the main algicidal components derived from Brevibacillus sp.. Thus, this study presents a streamlined strategy for identifying bacterial algicidal substances and unveils two novel and highly active algicidal substances. ENVIRONMENTAL IMPLICATION: Harmful cyanobacterial blooms (HCBs) pose significant environmental problems and health effects to humans and other organisms. The increasing frequency of HCBs has emerged as a pressing global concern. Bacterial-derived algicidal substances are expected to serve as effective, safe, and economically viable algaecides against HCBs. This study presents a streamlined strategy for identifying bacterial algicidal substances and unveils two novel substances (4-ABC and 8-HQL). These two substances demonstrate remarkable algicidal activity and disrupt the photosynthetic system in M. aeruginosa. They hold potential as prospective algaecides for addressing HCBs.

Freezing-enhanced chlorination of organic pollutants for water treatment

Freezing has been reported to accelerate chemical reactions and thus affect the fate of pollutants in the environment. However, little research has been conducted on the potential effects of freezing on the chlorination process. This study aimed to explore the freezing-enhanced chlorination process by comparing the oxidation of clofibric acid (CA) by chlorine in ice (at -20 °C) to the same reaction in water (at 25 °C). The degradation of CA, which was negligible in water, was significantly accelerated in ice. This acceleration can be attributed to the freeze concentration effect that occurs during freezing, which excludes solutes such as chlorine, CA and protons from the ice crystals, leading to their accumulated concentration in the liquid brine. The increased concentration of chlorine and protons in the liquid brine leads to higher rates of CA oxidation, supporting the freeze concentration effect as the underlying cause for the accelerated chlorination of CA in ice. Moreover, the chlorine/freezing system was also effective in the degradation of other organic pollutants. This highlights the environmental relevance and significance of freezing-enhanced chlorination in cold regions, particularly for the treatment of organic contaminants.

A review of antibiotics in surface water and their removal by advanced electrocoagulation technologies

The overuse and misuse of antibiotics have posed a serious threat to environment and human health, and even given rise to antibiotic resistance genes (ARGs). Antibiotics are ubiquitous in surface water worldwide with concentrations ranging from ng/L to μg/L level, being widely detected in rivers, lakes, seawater, and even drinking water. To address this thorny issue, numerous advanced technologies have been implemented to remove antibiotics. Advanced electrocoagulation (AEC) technologies, known as the combination of EC and other technologies capable of generating •OH in situ, have garnered considerable attention owing to their advances and high efficiency. This critical review investigated >120 relevant publications from the last few years (2017-2023) for the global distribution of commonly used antibiotics in surface water and their removal by various AEC technologies. Significant AEC technologies, such as combined electro-Fenton and EC (EF-EC) and combined electro-oxidation and EC (EO-EC), were reviewed. Their mechanism and characteristics were detailed. The major research results on removing antibiotics or the application potentials were elaborately described and discussed. Finally, the application trends of AEC technologies, as well as the challenges that may arise were prospected. The recommendations for controlling global antibiotic contamination in surface water were shared.

Effects of dissolved organic matter removal and molecular transformation in different water treatment processes on formation of disinfection byproducts

Alterations in molecular composition of dissolved organic matter (DOM) during water treatments can influence the composition and toxicity of disinfection by-products (DBPs) in subsequent chlorination disinfection process. In this study, the impacts of DOM composition after various water treatment techniques (coagulation, adsorption, nanofiltration, biological aerated filter (BAF), and their integrated processes) on the generation mechanisms of DBPs were comprehensively explored by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) in combination with GC-MS and LC-MS analysis. The results indicated that coagulation preferentially removed unsaturated (low H/C) and oxidized (high O/C) compounds, whereas adsorption was prone to remove the reduced (low O/C) component that was more reactive with chlorine, leading to lower yields (μg DBP/mg DOC) of trihalomethanes (THMs) and haloacetic acids (HAAs) during subsequent chlorination. The coagulation-adsorption technique exhibited a relatively high removal of both known and unknown DBPs, demonstrating that coagulation and adsorption were complementary for DOM removal at the molecular level. Nanofiltration selectively removed molecules with relatively high O/C, however, those with very low O/C that were more reactive with chlorine could pass through the nanofiltration membrane, resulting in the highest yields of THMs and HAAs. Although BAF was inefficient in removing DBPs precursors, it could convert molecules with low degree of oxidation and unsaturation into highly oxidized and unsaturated ones, thereby significantly enhancing the removal of DBPs precursors in the subsequent coagulation-adsorption process. These findings are instrumental in developing and selecting more effective techniques to minimize the formation of DBPs in water treatment.

Nitrophenolic byproducts formation during sulfate radical oxidation and their fate in simulated drinking water treatment processes

Nitrite can be transformed to nitrophenolic byproducts in sulfate radical oxidation processes (SR-AOPs). These nitrophenols are highly mobile in subsurface and can potentially contaminate drinking water sources. However, their fate in a drinking water treatment remains ambiguous. Herein, the removal and transformation of four nitrophenolic byproducts formed during a heat activated peroxydisulfate oxidation process, i.e., 4-nitrophenol, 2,4-dinitrophenol, 5-nitrosalicylic acid, and 3,5-dinitrosalicylic acid, in a simulated drinking water treatment train were comprehensively examined. The removal of these nitrophenolic compounds in coagulation by either aluminum sulfate or ferric chloride ranged from 3.8% to 13.4%. In the chlorination process, 4-nitrophenol was removed only by 45.4% in 24 h at a chlorine dose of 5.0 mg/L. The removal of the other three nitrophenolic byproducts were less than 20%. Reaction between nitrophenolic byproducts and chlorine via electrophilic substitution gave rise to their chlorinated derivatives. Chlorinated nitrophenolic byproducts were more recalcitrant and toxic than their parent compounds, but still a tiny fraction of them could undergo further oxidation to form trichloronitromethane. This work implied that once nitrophenolic byproducts enter water source, they can penetrate the drinking water treatment train and react with the residual chlorine in distribution pipelines to form more hazardous byproducts. The findings raised additional concerns to the potential risk of the nitrophenolic byproducts formed in SR-AOPs.

The role of morphological changes in Microcystis adaptation to nutrient availability at the colonial level

Colony formation is a key trait facilitating the formation of Microcystis blooms. However, the role of morphological changes (e.g., colony size and tightness) in the adaptation to nutrient availability is not fully understood. In this study, we analyzed the morphological changes under both nutrient sufficiency and deficiency. Accordant morphological changes were found with both an isolated colonial strain and mixed field colonies. Colonies that were limited by nutrients became bloated and uncompacted structures, and this change was more pronounced under N deficiency. This looser morphology increased the availability of intra-colony light and relieved the size effect. When nutrients were sufficient, small colonies emerged, which helped to maintain rapid growth (0.32 day^-1). Our study highlighted probable role of morphological variations in: (1) diminishing intra-colony self-shading when facing nutrient deficiency; and (2) enlarging the population under high trophic levels by generating daughter colonies. These roles were also verified using field data from Lake Taihu, which further indicated that the seasonal succession of morphospecies was probably the result of adaptive morphological changes. Adaptive morphological changes offer advantages against fluctuations in nutrient availability, which should be considered when attempting to restrain bloom formation.