Insight into using a novel ultraviolet/peracetic acid combination disinfection process to simultaneously remove antibiotics and antibiotic resistance genes in wastewater: Mechanism and comparison with conventional processes

Oxygen vacancy-dependent synergistic disinfection of antibiotic-resistant bacteria by BiOBr nanoflower induced H2O2 activation

Antibiotic-resistant bacteria (ARB) and antibiotic-resistant genes (ARGs) pose a significant threat to both ecosystems and human health. Owing to the excellent catalytic activity, eco-safety, and convenience for defect engineering, BiOBr with oxygen vacancies (OVs) of different density thus were fabricated and employed to activate H2O2 for ARB disinfection/ARGs degradation in present study. We found that BiOBr with OVs of appropriate density induced via ethanol reduction (BOB-E) could effectively activate H2O2, achieving excellent ARB disinfection and ARGs degradation efficiency. Moreover, this disinfection system exhibited remarkable tolerance to complex water environments and actual water conditions. In-situ characterization and theoretical calculations revealed that OVs in BOB-E could effectively capture and activate aqueous H2O2 into HO· and O2·-. The generated reactive oxygen species combined with electron transfer could damage the cell membrane system and degrade genetic materials of ARB, leading to effective disinfection. The impressive reusability, high performance achieved in two immobilized reaction systems (packed column and baffled ditch reactor), excellent degradation of emerging organic pollutants supported the feasibility of BOB-E/H2O2 system towards practical water decontamination. Overall, this study not only provides insights into fabrication of bismuth-based catalysts for efficient ARB disinfection/ARGs degradation via OVs regulation, but also paves the way for their practical applications.

Natural pyrite and ascorbic acid co-enhance periodate activation for inactivation of antibiotic resistant bacteria and inhibition of resistance genes transmission: A green disinfection process dominated by singlet oxygen

The transmission of antibiotic resistance genes (ARGs) and the propagation of antibiotic resistant bacteria (ARB) threaten public health security and human health, and greener and more efficient disinfection technologies are expected to be discovered for wastewater treatment. In this study, natural pyrite and ascorbic acid (AA) were proposed as environmental-friendly activator and reductant for periodate (PI) activation to inactivate ARB. The disinfection treatment of PI/pyrite/AA system could inactivate 5.62 log ARB within 30 min, and the lower pH and higher PI and natural pyrite dosage could further boost the disinfection efficiency. The 1O2 and SO4•- were demonstrated to be crucial for the inactivation of ARB in PI/pyrite/AA system. The disinfection process destroyed the morphological structure of ARB, inducing oxidative stress and stimulating the antioxidant system. The PI/pyrite/AA system effectively reduced the intracellular and extracellular DNA concentration and ARGs abundance, inhibiting the propagation of ARGs. The presence of AA facilitated the activation of PI with natural pyrite and significantly increased the concentration of Fe2+ in solution. The reusability of natural pyrite, the safety of the disinfection by-products and the inhibition of ARB regeneration indicated the application potential of PI/pyrite/AA system in wastewater disinfection.

Elimination of representative antibiotic-resistant bacteria, antibiotic resistance genes and ciprofloxacin from water via photoactivation of periodate using FeS2

The propagation of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) induced by the release of antibiotics poses great threats to ecological safety and human health. In this study, periodate (PI)/FeS2/simulated sunlight (SSL) system was employed to remove representative ARB, ARGs and antibiotics in water. 1 × 107 CFU mL-1 of gentamycin-resistant Escherichia coli was effectively disinfected below limit of detection in PI/FeS2/SSL system under different water matrix and in real water samples. Sulfadiazine-resistant Pseudomonas and Gram-positive Bacillus subtilis could also be efficiently sterilized. Theoretical calculation showed that (110) facet was the most reactive facet on FeS2 to activate PI for the generation of reactive species (·OH, ·O2-, h+ and Fe(IV)=O) to damage cell membrane and intracellular enzyme defense system. Both intracellular and extracellular ARGs could be degraded and the expression levels of multidrug resistance-related genes were downregulated during the disinfection process. Thus, horizontal gene transfer (HGT) of ARB was inhibited. Moreover, PI/FeS2/SSL system could disinfect ARB in a continuous flow reactor and in an enlarged reactor under natural sunlight irradiation. PI/FeS2/SSL system could also effectively degrade the HGT-promoting antibiotic (ciprofloxacin) via hydroxylation and ring cleavage process. Overall, PI/FeS2/SSL exhibited great promise for the elimination of antibiotic resistance from water.

Tracking the transformation of extracellular polymeric substances during the ultraviolet/peracetic acid disinfection process: Emphasizing on molecular-level analysis and overlooked mechanisms

In this study, the transformation mechanisms of extracellular polymeric substances (EPS) during ultraviolet/peracetic acid (UV/PAA) disinfection were elucidated based on multiple molecular-level analyses. After UV/PAA disinfection, the contents of soluble EPS (S-EPS), loosely bound EPS (LB-EPS) and tightly bound EPS (TB-EPS) were reduced by 70.47 %, 57.05 % and 47.46 %, respectively. Fluorescence excitation-emission matrix-parallel factor and Fourier transform ion cyclotron resonance mass spectrometry analyses showed that during UV/PAA disinfection, EPS was transformed from the state characterized by high aromaticity, low saturation and low oxidation to the one with reduced aromaticity, increased saturation and higher oxidation. Specifically, sulfur-containing molecules (CHOS, CHONS, etc.) in EPS were converted into highly saturated and oxidized species (such as CHO), with the aromaticity index (AImod) decreasing by up to 53.84 %. Molecular characteristics analyses further indicated that saturation degree, oxidation state of carbon and molecular weight exhibited the most significant changes in S-EPS, LB-EPS and TB-EPS, respectively. Additionally, mechanistic analysis revealed that oxygen addition reaction was the predominant reaction for S-EPS (+O) and TB-EPS (+3O) (accounting for 31.78 % and 36.47 %, respectively), while the dealkylation was the main reaction for LB-EPS (29.73 %). The results were consistent with functional groups sequential responses analyzed by Fourier transform infrared and two-dimensional correlation spectroscopy, and were further verified by density functional theory calculations. Most reactions were thermodynamically feasible, with reaction sites predominantly located at functional groups such as CO, CO, CN and aromatic rings. Moreover, metabolomics analysis suggested that changes in metabolites in raw secondary effluent during UV/PAA disinfection were strongly correlated with EPS transformation. Our study not only provides a strong basis for understanding EPS transformation during UV/PAA disinfection at molecular-level but also offers valuable insights for the application this promising disinfection process.

Pre-exposure to peracetic acid followed by UV treatment for deactivating vancomycin-resistant Enterococcus faecalis through intracellular attack

Antimicrobial resistance (AMR) poses a global health threat to aquatic environments and its propagation is a hot topic. Therefore, deactivating antibiotic-resistant bacteria (ARB) and removing antibiotic resistance genes (ARGs) from water is crucial for controlling AMR transmission. Peracetic acid (PAA), which is known for its potent oxidizing properties and limited by-product formation, is emerging as a favorable disinfectant for water treatment. In this study, we aimed to assess the efficacy of pre-exposure to PAA followed by UV treatment (PAA-UV/PAA) compared with the simultaneous application of UV and PAA (UV/PAA). The focus was on deactivating vancomycin-resistant Enterococcus faecalis (VREfs), a typical ARB in water. Pre-exposure to PAA significantly enhanced the efficacy of subsequent UV/PAA treatment. At a UV fluence of 7.2 mJ cm-2, the PAA-UV/PAA method achieved a 6.21 log reduction in VREfs, surpassing the 1.29 log reduction observed with UV/PAA. Moreover, compared to UV/PAA, PAA-UV/PAA showed increased efficacy with longer pre-exposure times and higher PAA concentrations, maintaining superior performance across a broad pH range and in the presence of humic acid. Flow cytometry analysis indicated minimal cellular membrane damage using both methods. However, the assessments of superoxide dismutase (SOD) activity and adenosine triphosphate content revealed that PAA-UV/PAA induced greater oxidative stress under similar UV irradiation conditions, leading to slower bacterial regrowth. Specifically, SOD activity in PAA-UV/PAA surged to 3.06 times its baseline, exceeding the 1.73-fold increase under UV/PAA conditions. Additionally, pre-exposure to PAA amplified ARGs degradation and reduced resistance gene leakage, effectively mitigating the spread of AMR. Pre-exposure to 200 μM PAA for 10 and 20 min enhanced vanB gene removal efficiency by 0.14 log and 1.29 log, respectively. Our study provides a feasible approach for optimizing UV/PAA disinfection for efficient removal of ARB and ARGs.

Simultaneous Emerging Contaminant Removal and H2O2 Generation Through Electron Transfer Carrier Effect of Bi─O─Ce Bond Bridge Without External Energy Consumption

Conventional advanced oxidation processes (AOPs) require significant external energy consumption to eliminate emerging contaminants (ECs) with stable structures. Herein, a catalyst consisting of nanocube BiCeO particles (BCO-NCs) prepared by an impregnation-hydrothermal process is reported for the first time, which is used for removing ECs without light/electricity or any other external energy input in water and simultaneous in situ generation of H2O2. A series of characterizations and experiments reveal that dual reaction centers (DRC) which are similar to the valence band/conducting band structure are formed on the surface of BCO-NCs. Under natural conditions without any external energy consumption, the BCO-NCs self-purification system can remove more than 80% of ECs within 30 min, and complete removal of ECs within 30 min in the presence of abundant electron acceptors, the corresponding second-order kinetic constant is increased to 3.62 times. It is found that O2 can capture electrons from ECs through the Bi─O─Ce bond bridge during the reaction process, leading to the in situ production of H2O2. This work will be a key advance in reducing energy consumption for deep wastewater treatment and generating important chemical raw materials.

Efficient activation of peracetic acid by cobalt modified nitrogen-doped carbon nanotubes for drugs degradation: Performance and mechanism insight

Peracetic acid (PAA) has garnered significant attention as a novel disinfectant owing to its remarkable oxidative capacity and minimal potential to generate byproducts. In this study, we prepared a novel catalyst, denoted as cobalt modified nitrogen-doped carbon nanotubes (Co@N-CNTs), and evaluated it for PAA activation. Modification with cobalt nanoparticles (∼4.8 nm) changed the morphology and structure of the carbon nanotubes, and greatly improved their ability to activate PAA. Co@N-CNTs/PAA catalytic system shows outstanding catalytic degradation ability of antiviral drugs. Under neutral conditions, with a dosage of 0.05 g/L Co@N-CNT-9.8 and 0.25 mM PAA, the removal efficiency of acyclovir (ACV) reached 98.3% within a mere 10 min. The primary reactive species responsible for effective pollutant degradation were identified as acetylperoxyl radicals (CH3C(O)OO•) and acetyloxyl radicals (CH3C(O)O•). In addition, density functional theory (DFT) proved that Co nanoparticles, as the main catalytic sites, were more likely to adsorb PAA and transfer more electrons than N-doped graphene. This study explored the feasibility of PAA degradation of antiviral drugs in sewage, and provided new insights for the application of heterogeneous catalytic PAA in environmental remediation.

Using UV/peracetic acid as pretreatment for subsequent bio-treatment of antibiotic-containing wastewater treatment: Mitigating microbial inhibition and antibiotic resistance genes proliferation

UV/peracetic acid (PAA) treatment presents a promising approach for antibiotic removal, but its effects on microbial community and proliferation of antibiotic resistance genes (ARGs) during the subsequent bio-treatment remain unclear. Thus, we evaluated the effects of the UV/PAA on tetracycline (TTC) degradation, followed by introduction of the treated wastewater into the bio-treatment system to monitor changes in ARG expression and biodegradability. Results demonstrated effective TTC elimination by the UV/PAA system, with carbon-centered radicals playing a significant role. Crucially, the UV/PAA system not only eliminated antibacterial activity but also inhibited potential ARG host growth, thereby minimizing the emergence and dissemination of ARGs during subsequent bio-treatment. Additionally, the UV/PAA system efficiently removed multi-antibiotic resistant bacteria and ARGs from the bio-treatment effluent, preventing ARGs from being released into the environment. Hence, we propose a multi-barrier strategy for treating antibiotic-containing wastewater, integrating UV/PAA pre-treatment and post-disinfection with bio-treatment. The inhibition of ARGs transmission by the integrated system was verified through actual soil testing, confirming its effectiveness in preventing ARGs dissemination in the surrounding natural ecosystem. Overall, the UV/PAA treatment system offers a promising solution for tackling ARGs challenges by controlling ARGs proliferation at the source and minimizing their release at the end of the treatment process.

Insights into mechanism of peroxymonosufate activation by Mo single-atom catalysts: Singlet oxygen evolution and role of Mo-N coordination

Recently, the Fenton-like reaction using peroxymonosulfate (PMS) has been acknowledged as a potential method for breaking down organic pollutants. In this study, we successfully synthesized a highly efficient and stable single atom molybdenum (Mo) catalyst dispersed on nitrogen-doped carbon (Mo-NC-0.1). This catalyst was then utilized for the first time to activate PMS and degrade bisphenol A (BPA). The Mo-NC-0.1/PMS system demonstrated the ability to completely degrade BPA within just 20 min. Scavenging tests and density functional theory (DFT) calculations have demonstrated that the primary reactive oxygen species was singlet oxygen (1O2) produced by Mo-N4 sites. The self-cycling of Mo facilitated PMS activation and the transition from a free radical activation pathway to a non-radical pathway mediated by 1O2. Simultaneously, the nearby pyridinic N served as adsorption sites to immobilize BPA and PMS molecules. The exceptionally high catalytic activity of Mo-NC-0.1 derived from its unique Mo-N coordination, which markedly reduced the distance for 1O2 to migrate to the BPA molecules. The Mo-NC-0.1/PMS system effectively reduced the acute toxicity of BPA and exhibited excellent cycling stability with minimal leaching. This study presented a new catalyst with high selectivity for 1O2 generation and provided valuable insights for the application of single atom catalysts in PMS-based AOPs.

Application of artificial intelligence in (waste)water disinfection: Emphasizing the regulation of disinfection by-products formation and residues prediction

Water/wastewater ((waste)water) disinfection, as a critical process during drinking water or wastewater treatment, can simultaneously inactivate pathogens and remove emerging organic contaminants. Due to fluctuations of (waste)water quantity and quality during the disinfection process, conventional disinfection models cannot handle intricate nonlinear situations and provide immediate responses. Artificial intelligence (AI) techniques, which can capture complex variations and accurately predict/adjust outputs on time, exhibit excellent performance for (waste)water disinfection. In this review, AI application data within the disinfection domain were searched and analyzed using CiteSpace. Then, the application of AI in the (waste)water disinfection process was comprehensively reviewed, and in addition to conventional disinfection processes, novel disinfection processes were also examined. Then, the application of AI in disinfection by-products (DBPs) formation control and disinfection residues prediction was discussed, and unregulated DBPs were also examined. Current studies have suggested that among AI techniques, fuzzy logic-based neuro systems exhibit superior control performance in (waste)water disinfection, while single AI technology is insufficient to support their applications in full-scale (waste)water treatment plants. Thus, attention should be paid to the development of hybrid AI technologies, which can give full play to the characteristics of different AI technologies and achieve a more refined effectiveness. This review provides comprehensive information for an in-depth understanding of AI application in (waste)water disinfection and reducing undesirable risks caused by disinfection processes.

Inactivation of antibiotic resistant bacteria by Fe3O4 @MoS2 activated persulfate and control of antibiotic resistance dissemination risk

Antibiotic resistance poses a global environmental challenge that jeopardizes human health and ecosystem stability. Antibiotic resistant bacteria (ARB) significantly promote the spreading and diffusion of antibiotic resistance. This study investigated the efficiency and mechanism of inactivating tetracycline-resistant Escherichia coli (TR E. coli) using Fe3O4 @MoS2 activated persulfate (Fe3O4 @MoS2/PS). Under optimized conditions (200 mg/L Fe3O4 @MoS2, 4 mM PS, 35 °C), TR E. coli (∼7.5 log CFU/mL) could be fully inactivated within 20 min. The primary reactive oxygen species (ROS) responsible for TR E. coli inactivation in the Fe3O4 @MoS2/PS system were hydroxyl radicals (•OH) and superoxide radicals (•O2-). Remarkably, the efflux pump protein was targeted and damaged by the generated ROS during the inactivation process, resulting in cell membrane rupture and efflux of cell content. Additionally, the horizontal transmission ability of residual antibiotic resistance genes (ARGs) harboring in the TR E. coli was also reduced after the inactivation treatment. This study offers an efficient approach for TR E. coli inactivation and substantial mitigation of antibiotic resistance dissemination risk.

Abatement of antibiotics and resistance genes during catalytic ozonation enhanced sludge dewatering process: Synchronized in volume and hazardousness reduction

Based on the efficiency of the catalytic ozonation techniques (HDWS+O3 and MnFe2O4 @SBC+O3) in enhancing the sludge dewaterability, the effectiveness in synchronized abatement antibiotics and antibiotic resistance genes (ARGs) was conducted to determine. The results revealed that catalytic ozonation conditioning altered the distribution of target antibiotics (tetracycline (TC), oxytetracycline (OTC), norfloxacin (NOR), ofloxacin (OFL)) in the dewatered filtrate, the dewatered sludge cake and the extra-microcolony/cellular polymers (EMPS/ECPS) layers, achieving the redistribution from solid-phase adsorption to liquid-phase dissolution. The total degradation rate was over 90% for TC and OTC, 72-78% for NOR and OFL; the abatement efficiency of eleven ARGs reached 1.47-3.01 log and 1.64-3.59 log, respectively, and more than four eARGs were eliminated. The effective abatement of the absolute abundance of Mobile genetic elements (MGEs) (0.91-1.89 log) demonstrated that catalytic ozonation conditioning could also significantly inhibit horizontal gene transfer (HGT). The abundance of resistant bacteria was greatly reduced and the signal transduction of the typical ARGs host bacteria was inhibited. The highly reactive oxidation species (ROS) generated were responsible for the abatement of antibiotics and ARGs. These findings provided new insights into the sludge conditioning for ideal and synchronized reduction in volume and hazardousness by catalytic ozonation processes in sludge treatment.

Underlying the mechanisms of pathogen inactivation and regrowth in wastewater using peracetic acid-based disinfection processes: A critical review

Peracetic acid (PAA) disinfection is an emerging wastewater disinfection process. Its advantages include excellent pathogen inactivation performance and little generation of toxic and harmful disinfection byproducts. The objective of this review is to comprehensively analyze the experimental data and scientific information related to PAA-based disinfection processes. Kinetic models and modeling frameworks are discussed to provide effective tools to assess pathogen inactivation efficacy. Then, the efficacy of PAA-based disinfection processes for pathogen inactivation is summarized, and the inactivation mechanisms involved in disinfection and the interactions of PAA with conventional disinfection processes are elaborated. Subsequently, the risk of pathogen regrowth after PAA-based disinfection process is clearly discussed. Finally, to address ecological risks related to PAA-based disinfection, its impact on the spread of antibiotic-resistant bacteria and the transfer of antibiotic resistance genes (ARGs) is also assessed. Among advanced PAA-based disinfection processes, ultraviolet/PAA is promising not only because it has practical application value but also because pathogen regrowth can be inhibited and ARGs transfer risk can be significantly reduced via this process. This review presents valuable and comprehensive information to provide an in-depth understanding of PAA as an alternative wastewater disinfection technology.

Hydroxylamine enhanced the degradation of diclofenac in Cu(II)/peracetic acid system: Formation and contributions of CH3C(O)O•, CH3C(O)OO•, Cu(III) and •OH

The slow reduction of Cu(II) into Cu(I) through peracetic acid (PAA) heavily limited the widespread application of Cu(II)/PAA system. Herein, hydroxylamine (HA) was proposed to boost the oxidative capacity of Cu(II)/PAA system by facilitating the redox cycle of Cu(I)/Cu(II). HA/Cu(II)/PAA system was quite rapid in the removal of diclofenac within a broad pH range of 4.5-9.5, with a 10-fold increase in the removal rate of diclofenac compared with the Cu(II)/PAA system at an optimal initial pH of 8.5. Results of UV-Vis spectra, electron paramagnetic resonance, and alcohol quenching experiments demonstrated that CH3C(O)O•, CH3C(O)OO•, Cu(III), and •OH were involved in HA/Cu(II)/PAA system, while CH3C(O)OO• was verified as the predominant reactive species of diclofenac elimination. Different from previously reported Cu-catalyzed PAA processes, CH3C(O)OO• mainly generated from the reaction of PAA with Cu(III) rather than CH3C(O)O• and •OH. Four possible elimination pathways for diclofenac were proposed, and the acute toxicity of treated diclofenac solution with HA/Cu(II)/PAA system significantly decreased. Moreover, HA/Cu(II)/PAA system possessed a strong anti-interference ability towards the commonly existent water matrix. This research proposed an effective strategy to boost the oxidative capacity of Cu(II)/PAA system and might promote its potential application, especially in copper-contained wastewater.

Enhanced simultaneous removal of sulfamethoxazole and zinc (II) in the biochar-immobilized bioreactor: Performance, microbial structures and gene functions

Biochar-immobilized functional bacteria Bacillus SDB4 was applied for sulfamethoxazole (SMX) and zinc (Zn2+) simultaneous removal in the bioreactor. Under the optimal operating conditions of HRT of 10 h, pH of 7.0, SMX concentration of 10 mg L-1 and Zn2+ concentration of 50 mg L-1, the removal efficiencies of SMX and Zn2+ by the immobilized reactor (IR) were 97.42% and 96.14%, respectively, 20.39% and 30.15% higher than those by free bioreactor (FR). SEM-EDS and FTIR results revealed that the functional groups and light metals on the carrier promoted the biosorption and biotransformation of SMX and Zn2+ in IR. Moreover, the improvement of SMX and Zn2+ removal might be related to the abundance enhancement of functional bacteria and genes. Bacillus SDB4 responsible for SMX and Zn2+ removal was the main strain in IR and FR. Biochar increased the relative abundance of Bacillus from 32.12% in FR to 38.73% in IR and improved the abundances of functional genes (such as carbohydrate metabolism, replication and repair and membrane transport) by 1.82%-11.04%. The correlations among the physicochemical properties, microbial communities, functional genes and SMX-Zn2+ co-contaminant removal proposed new insights into the mechanisms of biochar enhanced microbial removal of antibiotics and heavy metals in biochar-immobilized bioreactors.

Simultaneous removal of antibiotic-resistant Escherichia coli and its resistance genes by dielectric barrier discharge plasma

As emerging contaminants, antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been widely detected in various aqueous environments. For antibiotic resistance to be inhibited in the environment, it is essential to control ARB and ARGs. In this study, dielectric barrier discharge (DBD) plasma was used to inactivate antibiotic resistant Escherichia coli (AR E. coli) and remove ARGs simultaneously. Within 15 s of plasma treatment, 108 CFU/mL of AR E. coli were inactivated by 97.9%. The rupture of the bacterial cell membrane and the increase of intracellular ROS are the main reasons for the rapid inactivation of bacteria. Intracellular ARGs (i-qnrB, i-blaCTX-M, i-sul2) and integron gene (i-int1) decreased by 2.01, 1.84, 2.40, and 2.73 log after 15 min of plasma treatment, respectively. In the first 5 min of discharge, extracellular ARGs (e-qnrB, e-blaCTX-M, e-sul2) and integron gene (e-int1) decreased by 1.99, 2.22, 2.66, and 2.80 log, respectively. The results of the ESR and quenching experiments demonstrated that ·OH and 1O2 played important roles in the removal of ARGs. This study shows that DBD plasma is an effective technique to control ARB and ARGs in waters.

Simultaneous removal of antibiotics and antibiotic resistance genes in wastewater by a novel nonthermal plasma/peracetic acid combination system: Synergistic performance and mechanism

In this study, a novel and green method combining plasma with peracetic acid (plasma/PAA) was developed to simultaneously remove antibiotics and antibiotic resistance genes (ARGs) in wastewater, which achieves significant synergistic effects in the removal efficiencies and energy yield. At a plasma current of 2.6 A and PAA dosage of 10 mg/L, the removal efficiencies of most detected antibiotics in real wastewater exceeded 90 % in 2 min, with the ARG removal efficiencies ranging from 6.3 % to 75.2 %. The synergistic effects of plasma and PAA could be associated with the motivated production of reactive species (including •OH, •CH₃, ¹O₂, ONOO^-, •O₂^- and NO•), which decomposed antibiotics, killed host bacteria, and inhibited ARG conjugative transfer. In addition, plasma/PAA also changed the contributions and abundances of ARG host bacteria and downregulated the corresponding genes of two-component regulatory systems, thus reducing ARG propagation. Moreover, the weak correlations between the removal of antibiotics and ARGs highlights the commendable performance of plasma/PAA in the simultaneous removal of antibiotics and ARGs. Therefore, this study affords an innovative and effective avenue to remove antibiotics and ARGs, which relies on the synergistic mechanisms of plasma and PAA and the simultaneous removal mechanisms of antibiotics and ARGs in wastewater.

Photo-induced heterogeneous regeneration of Fe(Ⅱ) in Fenton reaction for efficient polycyclic antibiotics removal and in-depth charge transfer mechanism

Fenton reaction is regarded as a potential treatment for antibiotics removal, but challenges remain due to the sluggish reaction kinetics of Fe(III) reduction and incomplete degradation from insufficient active substance. Distinguished from traditional Fe(Ⅱ) regeneration techniques, this work focuses on utilizing the aliovalent redox pairs and built-in electric field to induce photo-excited electrons to cross the material interface and achieve Fe(III) reduction (heterogeneous regeneration). Herein, oxygen-deficient CeO₂ particles are anchored on metal-organic frameworks (MIL-88A) and thus constitute the heterojunction with enhanced photoelectric properties, accelerating the directional charge transfer. Consequently, the synthesized MIL-88A/CeO₂(OV) composite can degrade 95.76% of oxytetracycline within 60 min in photo-Fenton reaction and maintain a high mineralization rate (75.33%) after 4 cyclic tests. Furthermore, the charge transfer mechanisms of Fe cycle and antibiotics mineralization are both unveiled via experiment results and theorical calculation. This work proposes a new paradigm for constructing self-sufficient photo-Fenton catalytic system for efficient and sustainable removal of polycyclic antibiotics.

Extracellular DNA includes an important fraction of high-risk antibiotic resistance genes in treated wastewaters

Wastewater treatment plants are among the main hotspots for the release of antibiotic resistance genes (ARGs) into the environment. ARGs in treated wastewater can be found in the intracellular DNA (iDNA) and in the extracellular DNA (eDNA). In this study, we investigated the fate and the distribution (either in eDNA or in iDNA) of ARGs in the treated wastewaters pre and post-disinfection by shotgun metagenomics. The richness of the intracellular resistome was found to be higher than the extracellular one. However, the latter included different high risk ARGs. About 11% of the recovered metagenome assembled genomes (MAGs) from the extracted DNA was positive for at least one ARG and, among them, several were positive for more ARGs. The high-risk ARG bacA was the most frequently detected gene among the MAGs. The disinfection demonstrated to be an important driver of the composition of the antibiotic resistomes. Our results demonstrated that eDNA represents an important fraction of the overall ARGs, including a number of high-risk ARGs, which reach the environment with treated wastewater effluents. The studied disinfections only marginally affect the whole antibiotic resistome but cause important shifts from intracellular to extracellular DNA, potentially threating human health.

Water disinfection by the UVA/electro-Fenton process under near neutral conditions: Performance and mechanisms

An efficient and thorough water disinfection is critical for human health. In this study, UVA-LEDs, nitrilotriacetic acid (NTA) and a boron-doped diamond anode were respectively used as the UVA source, the iron chelator and the anode for the UVA/electro-Fenton (E-Fenton) reaction to treat wastewater. The disinfection performance of the UVA/E-Fenton had been investigated. The mechanisms of the E. coli inactivation had been clarified. The results showed that complete disinfection (about 5.6-log removal) could be achieved within 50 min at a certain condition due to the synergistic effort of the UVA, anodic oxidation and the electro-Fenton. The quenching experiments and the electron paramagnetic resonance (EPR) detection indicated that •OH, •O₂^- and ¹O₂ play important roles for inactivating E. coli. The results of SEM images and genomic DNA electrophoresis suggested that both the cell structure and the DNA had been thoroughly destroyed during the UVA/E-Fenton process. Increasing the UVA irradiation, oxygen bubbling could improve the disinfection rate, while it also would increase the energy consumption. The appropriate Fe and NTA ratio was 1:2 to realize an efficient Fenton reaction under near neutral condition. Complete disinfection was also achieved within 50 min when it used for treating real wastewater. Thus, the UVA/E-Fenton process is a satisfied way for water disinfection.

Exploring recycled agricultural wastes for high-rate removal of nitrogen in wastewater: Emphasizing on the investigation of the inner driving force and comparison with conventional liquid carbon sources

In this study, four typical recycled agricultural wastes (AWs), corn cob, wheat straw, sawdust and walnut shells (named AW1, AW2, AW3 and AW4, respectively), were selected as external solid carbon sources to enhance the removal of nitrogen in wastewater, and specifically, the driving mechanism was thoroughly investigated. The leaching experiments showed that the dissolved organic carbon (DOC) release capacity followed the order of AW1>AW2>AW3>AW4, ranging from 6.21 to 31.92 mg/g. DOC released from AWs mainly consisted of protein-like substances, fulvic acid-like substances and humic-like substances. AW1 and AW2 achieved comparable NO_x^--N removal performance with a liquid carbon source of sodium acetate (SA) during the long-term denitrification experiments (>94.2%) but not for the other two AWs (only 16.8%-38.1%). Denitrification performance relied on DOC released from AWs at the beginning, while the enrichment of the functional CAZymes (including glycoside hydrolase and carbohydrate esterase) involved in cellulose and hemicellulose decomposition of AWs and functional genes (GAPDH, gap 2, PK, etc.) related to glycolysis were the inner driving force, which guaranteed the continuous supply of electron donors for denitrification. The relatively high abundances of napAB, narGHI, nirKS, norBC and nosZ, which encode nitrate reductase, nitrite reductase, NO reductase and N₂O reductase, assured the better denitrification performance in the SA, AW1 and AW2 groups. In addition to denitrification-related functional genes, the relative abundances of nirBD and nrfAH associated with dissimilatory nitrate reduction were much higher in AW1 and AW2 groups than in SA group, implying that the nitrogen removal mechanism should be different in liquid carbon source and AW-based solid carbon source systems. In addition, GLU, gltBD and glnA, which participate in ammonia assimilation were the highest in the AW2 group, resulting in a large amount of organic nitrogen accumulation (peak concentration of approximately 24.5 mg/L), and this finally ruled it out as an alternative external carbon source. The abovementioned microbial mechanism was verified based on the correlation analysis of nutrient removal and functional genes combined with host bacterial analysis. Our study can provide valuable information for understanding the mechanism of using AWs as alternative external carbon sources to promote the removal of nitrogen in wastewater.

Biodegradation of tylosin in swine wastewater by Providencia stuartii TYL-Y13: Performance, pathway, genetic background, and risk assessment

Microbial bioremediation offers a solution to the problem of residual antibiotics in wastewater associated with animal farms. Efficient degradation of antibiotic residues depends upon the genetic make-up of microbial degraders, which requires a comprehensive understanding of the degradation mechanisms. In this study, a novel, efficient tylosin (TYL)-degrading bacterium, Providencia stuartii TYL-Y13 (Y13) was isolated, which could completely degrade 100 mg/L TYL within 15 h under optimal operating conditions at 40 ℃, pH 7.0 %, and 1 % (v/v) bacterial inoculation rate. Whole genome sequencing revealed that strain Y13 consists of a circular chromosome and two plasmids. A new biodegradation pathway of TYL including desugarification, hydrolysis, and reduction reactions was proposed through the analysis of biodegradation products. It was demonstrated that strain Y13 gradually decreased the biotoxicity of TYL and its metabolites based on the results of the ecological structural activity relationships (ECOSAR) model analysis and toxicity assessment. Moreover, Y13 promoted the reduction of the target macrolide resistance genes in wastewater and disappeared within 84 h. These results shed new light on the mechanism of TYL biodegradation and better utilization of microbes to remediate TYL contamination.

Occurrence and Quantitative Microbial Risk Assessment of Methicillin-Resistant Staphylococcus aureus (MRSA) in a Sub-Catchment of the Yodo River Basin, Japan

The occurrence of Staphylococcus aureus (S. aureus) and methicillin-resistant S. aureus (MRSA) in a sub-catchment of the Yodo River Basin, a representative water system of a drinking water source in Japan, was investigated. The chromogenic enzyme-substrate medium method was used for the detection of S. aureus and MRSA by the presence or absence of antimicrobials in the medium for viable bacteria in a culture-based setting. The contributions of S. aureus and MRSA from wastewater to the rivers were estimated based on mass flux-based analysis, and quantitative microbial risk assessment (QMRA) was further conducted for S. aureus and MRSA in river environments. The mean abundance of S. aureus and MRSA was 31 and 29 CFU/mL in hospital effluent, 124 and 117 CFU/mL in sewage treatment plant (STP) influent, 16 and 13 CFU/mL in STP effluent, and 8 and 9 CFU/mL in river water, respectively. Contribution of the pollution load derived from the target STP effluent to river water ranged from 2% to 25%. The QMRA showed that to achieve the established health benchmarks, the drinking water treatment process would need to yield 1.7 log10 and 2.9 log10 inactivation in terms of infection risk and disability-adjusted life year (DALY) indexes, respectively. These findings highlight the link between medical environment and the importance of environmental risk management for antimicrobial-resistant bacteria in aquatic environments.

Enhanced degradation of Rhodamine B dye by Fenton/peracetic acid and photo-Fenton/peracetic acid processes

In this research, the efficiency of advanced oxidation processes (AOPs) including Fenton−Peracetic Acid (PAA) and photo-Fenton− PAA in the removal of the Rodamine B (RhB) dye from aqueous solutions were studied. Investigating the effect of operating parameters such as pH (3–9), contact time (2–30 min), PAA concentration (10–80 mg/L), FeCl3.7H2O concentration (10–100 mg/L), and dye concentration (25–500 mg/L) on the performance of AOPs in removal of RhB was considered. The results showed that by decreasing pH and dye concentration, RhB removal efficiency increased. The optimal conditions for removal of RhB using Fenton− PAA process were determined to be as follows: dye concentration = 50 mg/L, pH = 3, PAA concentration = 50 mg/L, contact time = 10 min, and FeCl3 = 50 mg/L; in these conditions, removal efficiency of the RhB was 99.9%. In contrast, the photo-Fenton− PAA process was able to remove this amount of dye in just 5 min. The high performance of the system in a short time is attributed to the synergistic effect of the photo-Fenton− PAA process in the presence of UV. Finally, RhB dye was completely degraded by the photo-Fenton− PAA process and converted into CO2 and H2O products. In general, the photo-Fenton− PAA process compared to other methods can be used as a suitable and reliable method for the treatment of effluents of the dyeing industry and discharge them to the environment.