Progress in alumina ceramic membranes for water purification: Status and prospects

A 2.5-Dimensional biomimetic dual-functional bifacial-evaporator for high efficient evaporation and water purification

Nowadays, solar-driven interfacial steam generation (SISG) is a sustainable and green technology for mitigating the water shortage crisis. Nevertheless, SISG is suffering from the enrichment of volatile organic compounds in condensate water and non-volatile organic compounds in feed water in practical applications. Herein, taking inspiration from nature, a dual-functional bifacial-CuCoNi (Bi-CuCoNi) evaporator with a special biomimetic urchin-like microstructure was successfully prepared. The unique design with 2.5-Dimensional bifacial working sides and urchin-like light absorption microstructure provided the Bi-CuCoNi evaporator with remarkable evaporation performance (1.91 kg m-2 h-1 under 1 kW m-2). Significantly, due to the urchin-like microstructure, the adequately exposed catalytic active sites enabled the Bi-CuCoNi/peroxydisulfate (PDS) system to degrade non-volatile organic pollutants (removal rate of 99.3 % in feed water, close to 100 % in condensate water) and the volatile organic pollutants (removal rate of 99.1 % in feed water, 98.2 % in condensate water) simultaneously. Moreover, the Bi-CuCoNi evaporator achieved non-radical pathway degradation at whole-stages. The dual-functional evaporator successfully integrated advanced oxidation processes (AOPs) into SISG, providing a new idea for high-quality freshwater production from polluted wastewater. ENVIRONMENTAL IMPLICATION: Inspired by nature, a dual-functional bifacial CuCoNi evaporator with a special biomimetic urchin-like microstructure formed by CuCoNi oxide nanowires grown on nickel foam by the hydrothermal synthesis method was successfully prepared. The prepared Bi-CuCoNi evaporator can effectively degrade organic pollutants in feed water and condensate water simultaneously during SISG, thus generating high-quality fresh water. Meanwhile, the health risks associated with the accumulation of organic pollutants in water during traditional SISG were reduced via green and sustainable way. The spatial 2.5-Dimensional structural design of Bi-CuCoNi provided new insights for achieving efficient water evaporation and fresh water generation from various polluted wastewater.

Recent development of substrates for immobilization of bimetallic nanoparticles for wastewater treatment: a review

Bimetallic nanoparticles (BMNPs) have gained considerable attention due to their remarkable catalytic properties, making them invaluable in wastewater treatment applications. One of these challenges lies in the propensity of BMNPs to aggregate due to Van der Waals interactions, which can reduce their overall performance. Additionally, retrieving exhausted NPs from the treated solution for subsequent reuse remains a significant hurdle. Moreover, the leaching of NPs into the discharged wastewater can have harmful effects on humans as well as aquatic life. To overcome these issues, various substrates have been researched to maximize the efficiency and stability of the NPs. This review paper delves into the pivotal role of various substrates in immobilizing BMNPs, providing a comprehensive analysis of their performances, advantages, and drawbacks. The substrates encompass a diverse range of materials, including organic, inorganic, organic-inorganic, beads, fibers, and membranes. Each substrate type offers unique attributes, influencing the stability, efficiency, and recyclability of BMNPs. This review paper aims to provide an up-to-date and detailed analysis and comparison of the substrates used for the immobilization of BMNPs. This work further reviews the underlying mechanisms of the composites involved in treating pollutants from wastewater and how these mechanisms are enhanced by the synergistic effects produced by the substrate and BMNPs. Furthermore, the reusability and sustainability of these composites are discussed. Also, high-performing substrates are highlighted to give direction to future research focusing on the immobilization of BMNPs in the application of wastewater treatment.

Optical Modification of a Nanoporous Alumina Structure Associated with Surface Coverage by the Ionic Liquid AliquatCl

This manuscript analyses changes in the optical parameters of a commercial alumina nanoporous structure (AnodiscTM or AND support) due to surface coverage by the ionic liquid (IL) AliquatCl (AlqCl). XPS measurements were performed for chemical characterization of the composite AND/AlqCl and the AND support, but XPS resolved angle analysis (from 15° to 75°) was carried out for the homogeneity estimation of the top surface of the ANDAlqCl sample. Optical characterization of both the composite AND/AlqCl and the AND support was performed by three non-destructive and non-invasive techniques: ellipsometry spectroscopy (SE), light transmittance/reflection, and photoluminescence. SE measurements (wavelength ranging from 250 nm to 1250 nm) allow for the determination of the refraction index of the AND/AlqCl sample, which hardly differs from that corresponding to the IL, confirming the XPS results. The presence of the IL significantly increases the light transmission of the alumina support in the visible region and reduces reflection, affecting also the maximum position of this latter curve, as well as the photoluminescence spectra. Due to these results, illuminated I-V curves for both the composite AND/AlqCl film and the AND support were also measured to estimate its possible application as a solar cell. The optical behaviour exhibited by the AND/AlqCl thin film in the visible region could be of interest for different applications.

Fabrication and characterization of microporous soft templated photoactive 3D materials for water disinfection in batch and continuous flow

Water cleaning can be provided in batch mode or in continuous flow. For the latter, some kind of framework must withhold the cleaning agents from washout. Porous structures provide an ideal ratio of surface to volume for optimal access of the water to active sites and are able to facilitate rapid and efficient fluid transport to maintain a constant flow. When functionalized with suitable photoactive agents, they could be used in solar photocatalytic disinfection. In this study, we have used the sugar cube method to fabricate PDMS-based materials that contain three different classes of photosensitizers that differ in absorption wavelength and intensity, charge as well as in ability to generate singlet oxygen. The obtained sponges are characterized by scanning electron microscopy and digital microscopy. Archimede's method was used to measure porosity and density. We show that the materials can absorb visible light and generate Reactive Oxygen Species (ROS) that are required to kill bacteria. The disinfection ability was tested by examining how irradiation time and operation mode (batch vs. flow) contribute to the performance of the material. The current strategy is highly adaptable to other (medium) pressure-driven flow systems and holds promising potential for various applications, including continuous flow photoreactions.

Membrane-catalysis integrated system for contaminants degradation and membrane fouling mitigation: A review

The integration of catalytic degradation and membrane separation processes not only enables continuous degradation of contaminants but also effectively alleviates inevitable membrane fouling, demonstrating fascinating practical value for efficient water purification. Such membrane-catalysis integrated system (MCIS) has attracted tremendous research interest from scientists in chemical engineering and environmental science recently. In this review, the advantages of MCIS are discussed, including the membrane structure regulation, stable catalyst loading, nano-confinement effect, and efficient natural organic matter (NOM) exclusion, highlighting the synergistic effect between membrane separation and catalytic process. Subsequently, the design considerations for the fabrication of catalytic membranes, including substrate membrane, catalytic material, and fabrication method, are comprehensively summarized. Afterward, the mechanisms and performance of MCIS based on different catalytic types, including liquid-phase oxidants/reductants involved MCIS, gas involved MCIS, photocatalysis involved MCIS, and electrocatalysis involved MCIS are reviewed in detail. Finally, the research direction and future perspectives of catalytic membranes for water purification are proposed. The current review provides an in-depth understanding of the design of catalytic membranes and facilitates their further development for practical applications in efficient water purification.

High-efficiency cleaning technology and lifespan prediction for the ceramic membrane treating secondary treated effluent

Chemical cleaning is one of the key technical means to control membrane fouling, restore membrane flux and ensure the stable operation of membrane systems. In the experiment, the six most representative chemical cleaning agents for ceramic membranes, such as sulfuric acid (H₂SO₄), sodium hydroxide (NaOH), sodium hypochlorite (NaClO), ethylenediaminetetraacetic acid disodium salt (EDTA-Na₂), sodium dodecyl sulfate (SDS) and nonylphenol polyoxyethylene ether (OP-10), were used as research objects. The cleaning effect of the two-step combined cleaning of chemical cleaning agents on the fouled membrane was systematically investigated. Results showed that the order of the chemical cleaning agent had a significant effect on the cleaning effect. The best chemical cleaning program was determined to be NaClO first and then SDS: the fouled ceramic membrane was soaked in NaClO solution at 0.15% for 2.5 h and further soaked in SDS solution at five times its own critical micelle concentration for 2.5 h. The predicted long-term lifespan of the ceramic membranes was 4.91 years. Scanning electron microscopy-energy spectrum analysis showed that the surface roughness of the cleaned ceramic membrane was slightly higher than that of the new membrane. The contact angle was slightly lower than that of the new membrane.