Characteristics and behaviors of microplastics undergoing photoaging and Advanced Oxidation Processes (AOPs) initiated aging

Environmentally persistent free radicals on photoaging microplastics shortens longevity via inducing oxidative stress in Caenorhabditis elegans

Microplastics (MPs) are ubiquitous environmental contaminants that exert multiple toxicological effects. Current studies have mainly focused on modeled or unaged MPs, which lack environmental relevance. The generation and toxicity of environmentally persistent free radicals (EPFRs) on photoaging polystyrene (PS) have not been well studied, and the role of EPFRs on the toxic effects of photoaged PS is easily ignored. Photoaging primarily produces EPFRs, followed by an increase in reactive oxygen species (ROS) content and oxidative potential, which alter the physicochemical properties of photoaged PS. The mean lifespan and lipofuscin content were significantly altered after acute exposure to photoaged PS for 45 d (PS-45) and 60 d (PS-60) in Caenorhabditis elegans. Intestinal ROS and gst-4::GFP expression were enhanced, concomitant with the upregulation of associated genes. Treatment with N-acetyl-l-cysteine by radical quenching test significantly decreased EPFRs levels on the aged PS and inhibited the acceleration of the aging and oxidative stress response in nematodes. Pearson's correlation analysis also indicated that the EPFRs levels were significantly associated with these factors. Thus, the EPFRs generated on photoaged PS contribute to the acceleration of aging by oxidative stress. This study provides new insights into the potential toxicity and highlights the need to consider the role of EPFRs in the toxicity assessment of photoaged PS.

Releasing characteristics of toxic chemicals from polystyrene microplastics in the aqueous environment during photoaging process

Microplastics (MPs) are pervasive in the environment and inevitably undergo photoaging due to UV irradiation. This study delved into the dynamic releasing and transformation process of toxic chemicals from polystyrene microplastics (PS MPs) during photoaging, a subject that remains underexplored. It was revealed that photoaging led to substantial alterations in the physicochemical properties of PS MPs, initiating polymer chain scission and facilitating the release of a large number of toxic chemicals, including numerous organic compounds and several inorganic compounds. The kinetic analysis revealed a dynamic release pattern for PS MPs, where under varying UV intensities (2, 5, and 10 mW/cm2), the release rate (kDOC) initially increased and then decreased, peaking at a total irradiation energy of approximately 7 kW·h/m2. Furthermore, chemicals in leachate were transformed into compounds with smaller molecular weight, higher oxidized and greater unsaturated state over the prolonged photoaging. This transformation was primarily attributed to two reasons. Firstly, the aged PS MPs released chemicals with higher oxidized state compared to the pristine MPs. Secondly, the chemicals previously released underwent further reactions. Besides, among the complex leachate generated by aged PS MPs, the organic chemicals characterized by small molecular weight and high oxidized state exhibited notable acute toxicity, whereas heavy metal ions showed lesser toxicity, and anions were non-toxic. This study shed more light on the photoaging process of PS MPs, releasing characteristics of organic chemicals, and the potential environmental risks associated with plastic wastes.

UVB-Aged Microplastics and Cellular Damage: An in Vitro Study

Plastics are synthetic organic compounds whose widespread use generates enormous waste. Different processes, such as mechanical abrasion, microbiological activity, and UVB irradiation, can fragment the plastic material and generate microplastics (MPs). MPs are ubiquitous, and various organisms, including humans, can ingest or inhale them, with potential adverse health effects. The differences between UV-aged and virgin particles were studied to evaluate the genotoxic damage and oxidative stress induced by polystyrene MPs with 1 and 5 µm sizes on the monocyte-like cell line (THP-1). Fourier transform infrared spectroscopy and Ζ-potential measurements were used to characterise MP particles after UVB exposure. Cells exposed to MPs show a widespread change in the cellular environment with the generation of reactive oxidative species (ROS), as indicated by the increased malondialdehyde level. The occurrence of genotoxic damage is correlated to the smaller size and ageing state of the MPs. The biochemical and genomic alterations observed in this in vitro study suggest that MPs, ubiquitous pollutants, following natural degradation and oxidation processes can cause various adverse effects on the health of the exposed population, making it necessary to carry out further studies to better define the real risk.

Genotoxicity and metabolic changes induced via ingestion of virgin and UV-aged polyethylene microplastics by the freshwater fish Perca fluviatilis

The present study aims to compare and assess the toxicity induced by aged (irradiated with ultraviolet radiation for 120 days) polyethylene microplastics (PE-MPs) in comparison to virgin (non-irradiated) ones, after feeding the freshwater fish Perca fluviatilis. To this end, MPs mediated genotoxicity was assessed by the investigation of micronucleus nuclear abnormalities frequency in fish blood, and the degree of DNA damage in the liver and muscle tissues, while metabolic alterations were also recorded in both tissues. Results showed that both virgin and aged PE-MPs induced signaling pathways leading to DNA damage and nuclear abnormalities, as well as metabolites changes in all tissues studied. Metabolic changes revealed that the metabolism of nucleic acids, energy, amino acids, and neurotransmitters was more disrupted in the liver and by aged PE-MPs compared to muscles. Fish fed with aged PE-MPs exhibited greater DNA damage, while blood cells of fish fed with virgin PE-MPs seemed to be more vulnerable to nuclear abnormalities in relation to those fed with aged PE-MPs. Moreover, aged PE-MPs induced more acute overall effects on the metabolic profiles of fish tissues, and initiated stronger stress responses, inflammation, and cellular damages in fish tissues in relation to virgin ones. Characterization of both virgin and aged MPs revealed that the latter exhibited lower crystallinity and melting point, more irregular shapes and higher moiety of oxygen and carbonyl groups, which could be attributed for their observed higher toxicity. The research outcomes provide significant insights for advancing toxicological investigations in this field.

A systematic review of microplastics emissions in kitchens: Understanding the links with diseases in daily life

The intensification of microplastics (MPs) pollution has emerged as a formidable environmental challenge, with profound global implications. The pervasive presence of MPs across a multitude of environmental mediums, such as the atmosphere, soil, and oceans, extends to commonplace items, culminating in widespread human ingestion and accumulation via channels like food, water, and air. In the domestic realm, kitchens have become significant epicenters for MPs pollution. A plethora of kitchen utensils, encompassing coated non-stick pans, plastic cutting boards, and disposable utensils, are known to release substantial quantities of MPs particles in everyday use, which can then be ingested alongside food. This paper conducts a thorough examination of contemporary research addressing the release of MPs from kitchen utensils during usage and focuses on the health risks associated with MPs ingestion, as well as the myriad factors influencing the release of MPs in kitchen utensils. Leveraging the insights derived from this analysis, this paper proposes a series of strategic recommendations and measures targeted at mitigating the production of MPs in kitchen settings. These initiatives are designed not solely to diminish the release of MPs but also to enhance public awareness regarding this pressing environmental concern. By adopting more informed practices in kitchens, we can significantly contribute to the reduction of the environmental burden of MPs pollution, thus safeguarding both human health and the ecological system.

Characteristics and adsorption behavior of typical microplastics in long-term accelerated weathering simulation

Microplastics can function as carriers in the environment, absorbing various toxins and spreading to diverse ecosystems. Toxins accumulated in microplastics have the potential to be re-released, posing a threat. In this study, two typical plastics, namely polyethylene (PE) and polystyrene (PS), along with the degradable plastic poly(butylene adipate-co-terephthalate) (PBAT), were subjected to a long-term ultraviolet alternating weathering experiment. The study investigated the variations in the weathering process and pollutant adsorption of microplastics of different particle sizes. Furthermore, the adsorption capacity of microplastics for various pollutants was assessed. The findings indicate that particle size significantly influences weathering, leading to variations in adsorption capacity. The weathered PE displays a higher adsorption capacity for azo dyes. Additionally, the adsorption capacity of PBAT for neutral red is double that of antibiotics. Importantly, the maximum adsorption capacity of PBAT for pollutants after aging is approximately 10 times greater than that of PE. Consequently, degradable plastics undergoing weathering in the natural environment may pose a higher ecological risk than traditional plastics.

Particle sizes crucially affected the release of additives from tire wear particles during UV irradiation and mechanical abrasion

In the environment, tire wear particles (TWPs) could release various additives to induce potential risk, while the effects of particle size on the additive release behavior and ecological risk from TWPs remain unknown. This study investigated the effects and mechanisms of particle sizes (>2 mm, 0.71-1 mm, and <0.1 mm) on the release behavior of TWPs additives under mechanical abrasion and UV irradiation in water. Compared to mechanical abrasion, UV irradiation significantly increased the level of additives released from TWPs. Especially, the additive releasing characteristics were critically affected by the particle sizes of TWPs, manifested as the higher release in the smaller-size ones. After 60 d of UV irradiation, the concentration of antioxidant N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD) reached 10.79 mg/L in the leachate of small-sized TWPs, 2.78 and 5.36 times higher than that of medium-sized and large-sized TWPs. The leachate of the small-sized TWPs also showed higher cytotoxicity. •OH and O2•- were identified as the main reactive oxygen species (ROS), which exhibited higher concentrations and dramatic attack on small-sized TWPs to cause pronounced fragmentation and oxidation, finally inducing the higher release of additives. This paper sheds light on the crucial effects and mechanism of particle sizes in the release behavior of TWPs additives, provides useful information to assess the ecological risk of TWPs.

Recent advances in microplastic removal from drinking water by coagulation: Removal mechanisms and influencing factors

Microplastics (MPs) are emerging contaminants that are widely detected in drinking water and pose a potential risk to humans. Therefore, the MP removal from drinking water is a critical challenge. Recent studies have shown that MPs can be removed by coagulation. However, the coagulation removal of MPs from drinking water remains inadequately understood. Herein, the efficiency, mechanisms, and influencing factors of coagulation for removing MPs from drinking water are critically reviewed. First, the efficiency of MP removal by coagulation in drinking water treatment plants (DWTPs) and laboratories was comprehensively summarized, which indicated that coagulation plays an important role in MP removal from drinking water. The difference in removal effectiveness between the DWTPs and laboratory was mainly due to variations in treatment conditions and limitations of the detection techniques. Several dominant coagulation mechanisms for removing MPs and their research methods are thoroughly discussed. Charge neutralization is more relevant for small-sized MPs, whereas large-sized MPs are more dependent on adsorption bridging and sweeping. Furthermore, the factors influencing the efficiency of MP removal were jointly analyzed using meta-analysis and a random forest model. The meta-analysis was used to quantify the individual effects of each factor on coagulation removal efficiency by performing subgroup analysis. The random forest model quantified the relative importance of the influencing factors on removal efficiency, the results of which were ordered as follows: MPs shape > Coagulant type > Coagulant dosage > MPs concentration > MPs size > MPs type > pH. Finally, knowledge gaps and potential future directions are proposed. This review assists in the understanding of the coagulation removal of MPs, and provides novel insight into the challenges posed by MPs in drinking water.

Perovskite Oxides: Syntheses and Perspectives on Their Application for Nitrate Reduction

Over the decades, the rise in nitrate levels in the ecosystem has posed a serious threat to the continuous existence of humans, fauna, and flora. The deleterious effects of increasing levels of nitrates in the ecosystem have led to adverse health and environmental implications in the form of methemoglobinemia and eutrophication, respectively. Different pathways/routes for the syntheses of perovskites and their oxides were presented in this review. In recent times, electrocatalytic reduction has emerged as the most utilized technique for the conversion of nitrates into ammonia, an industrial feedstock. According to published papers, the efficiency of various perovskites and their oxides used for the electrocatalytic reduction of nitrate achieved a high Faradaic efficiency of 98%. Furthermore, studies published have shown that there is a need to improve the chemical stability of perovskites and their oxides during scale-up applications, as well as their scalability for industrial applications.

What is the role of nitrate/nitrite in trace organic contaminants degradation and transformation during UV-based advanced oxidation processes?

The effectiveness of UV-based advanced oxidation processes (UV-AOPs) in degrading trace organic contaminants (TrOCs) can be significantly influenced by the ubiquitous presence of nitrate (NO3-) and nitrite (NO2-) in water and wastewater. Indeed, NO3-/NO2- can play multiple roles of NO3-/NO2- in UV-AOPs, leading to complexities and conflicting results observed in existing research. They can inhibit the degradation of TrOCs by scavenging reactive species and/or competitively absorbing UV light. Conversely, they can also enhance the elimination of TrOCs by generating additional •OH and reactive nitrogen species (RNS). Furthermore, the presence of NO3-/NO2- during UV-AOP treatment can affect the transformation pathways of TrOCs, potentially resulting in the nitration/nitrosation of TrOCs. The resulting nitro(so)-products are generally more toxic than the parent TrOCs and may become precursors of nitrogenous disinfection byproducts (N-DBPs) upon chlorination. Particularly, since the impact of NO3-/NO2- in UV-AOPs is largely due to the generation of RNS from NO3-/NO2- including NO•, NO2•, and peroxynitrite (ONOO-/ONOOH), this review covers the generation, properties, and detection methods of these RNS. From kinetic, mechanistic, and toxicologic perspectives, future research needs are proposed to advance the understanding of how NO3-/NO2- can be exploited to improve the performance of UV-AOPs treating TrOCs. This critical review provides a comprehensive framework outlining the multifaceted impact of NO3-/NO2- in UV-AOPs, contributing insights for basic research and practical applications of UV-AOPs containing NO3-/NO2-.

New insights into the fate and interaction mechanisms of hydrolyzed aluminum-titanium species in the removal of aged polystyrene

Polyaluminum-titanium chloride composite coagulant (PATC) has been demonstrated to be a promising coagulant in microplastics (MPs) treatment. However, the interaction process between the dominant species of PATC and MPs remains unclear, which will hinder our understanding of the coagulation mechanisms. Here, the species transformation of PATC during its interaction with aged polystyrene powder (APSp) was studied. The results showed that the rise of O-containing functional groups in APSp increased the possibility of forming C-O-M coordination bonds and hydrogen bonds between APSp and PATC, which improved the removal of PSp. Furthermore, Al13(OH)53Ti13O17(H2O)204+ (Al13Ti13) was considered to be the most effective species of PATC. At pH 4, electrostatic attraction brought Al13Ti13 approached APSp first, followed by hydrogen bonding and complexation occurred, respectively. However, the Al13Ti13-APSp complexes were easily converted to monomers and dimers during coagulation, which influenced the coagulation efficiency. With the increase of pH, OH- in the solution would further polymerize the depolymerized Al2Ti into oligomers and mesomers. Under weakly acid conditions, the diversity of PATC hydrolysates and the increase in APSp binding sites correspondingly led to the maximum APSp removal of 75%. When the pH further increased to 10, PATC interacted with APSp mainly by hydrogen bonding and sweeping effect.

Aging of polystyrene microplastics by UV/Sodium percarbonate oxidation: Organic release, mechanism, and disinfection by-product formation

The occurrence and transformation of microplastics (MPs) in environment has attracted considerable attention. However, the release characteristics of MP-derived dissolved organic matter (MP-DOM) under oxidation conditions and the effect of DOM on subsequent chlorination disinfection by-product (DBP) still lacks relevant information. This study focused on the conversion of polystyrene microplastics (PSMPs) in the advanced oxidation of ultraviolet-activated sodium percarbonate (UV/SPC-AOP) and the release characteristics of MP-DOM. The DBP formation potential of MP-DOM was also investigated. As a result, UV/SPC significantly enhanced the aging and fragmentation of PSMPs. Under UV irradiation, the fluorescence peak intensity and position of humus-like and protein-like components of MP-DOM were correlated with SPC concentration. The aging MP suspension was analyzed by gas chromatography-mass spectrometry (GC-MS), and various alkyl-cleavage and oxidation products were identified. Quenching experiments and electron paramagnetic resonance (EPR) detection confirmed that carbonate and hydroxyl radicals jointly dominated the conversion of PSMPs. The formation of DBP was related to the components of MP-DOM. Overall, these results help to understand the aging behavior of MPs in AOP. Moreover, MP-DOM released by MPs after AOP oxidation may be a precursor of DBPs, which deserved more attention.

Innovations in chemical degradation technologies for the removal of micro/nano-plastics in water: A comprehensive review

Micro/nanoplastics (M/NPs) in water have raised global concern due to their potential environmental risks. To reestablish a M/NPs free world, enormous attempts have been made toward employing chemical technologies for their removal in water. This review comprehensively summarizes the advances in chemical degradation approaches for M/NPs elimination. It details and discusses promising techniques, including photo-based technologies, Fenton-based reaction, electrochemical oxidation, and novel micro/nanomotors approaches. Subsequently, critical influence factors, such as properties of M/NPs and operating factors, are analyzed in this review specifically. Finally, it concludes by addressing the current challenges and future perspectives in chemical degradation. This review will provide guidance for scientists to further explore novel strategies and develop feasible chemical methods for the improved control and remediation of M/NPs in the future.

Aging of plastics in aquatic environments: Pathways, environmental behavior, ecological impacts, analyses and quantifications

The ubiquity of plastics in our environment has brought about pressing concerns, with their aging processes, photo-oxidation, mechanical abrasion, and biodegradation, being at the forefront. Microplastics (MPs), whether originating from plastic degradation or direct anthropogenic sources, further complicate this landscape. This review delves into the intricate aging dynamics of plastics in aquatic environments under various influential factors. We discuss the physicochemical changes that occur in aged plastics and the release of oxidation products during their degradation. Particular attention is given to their evolving environmental interactions and the resulting ecotoxicological implications. A rigorous evaluation is also conducted for methodologies in the analysis and quantification of plastics aging, identifying their merits and limitations and suggesting potential avenues for future research. This comprehensive review is able to illuminate the complexities of plastics aging, charting a path for future research and aiding in the formulation of informed policy decisions.

Sulfate radical-based advanced oxidation process effects on tire wear particles aging and ecotoxicity

Tire wear particles (TWPs) are widely distributed in natural water and pose as major pollutants in aquatic environments. In this study, heat-activated persulfate (HPT) and ultraviolet-activated persulfate treatments (UPT) were employed to investigate the influence of sulfate radical (SO4-•)-based advanced oxidation process (SAOPs) on TWP physicochemical properties and to clarify their ecotoxic effects in laboratory-level studies. Results showed that the specific surface areas of TWPs increased after UPT but decreased after HPT. In terms of chemical properties, the increase of oxygen-containing functional groups on the surfaces of TWPs was more evident in UPT than that in HPT. The atrazine (ATZ) adsorption capacity of TWPs after HPT and UPT was increased compared with the untreated TWPs. Atrazine adsorbed by TWPs was easily resolved and released in artificial intestinal fluid (1.89-2.08 mg/g) and artificial gastric fluid (1.60-2.04 mg/g) conditions. Acute toxicity experiments of Photobacterium phosphoreum and SEM-EDS detection results suggested that various heavy metals (e.g., Zn2+, Cu2+) in the TWPs would be released into the water system in SAOPs. ATZ released from TWPs that adsorbed ATZ herbicide, rather than TWPs themselves, had a negative effect on aquatic plant growth (e.g., C. vulgaris). The leaching solution of oxidized TWPs (after HPT and UPT) showed a more significant inhibition effect on the zebrafish survival compared with that of untreated TWPs, which was possibly caused by the generation of oxidation byproducts such as N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone.

The iron matters: Aged microplastics disrupted the iron homeostasis in the liver organoids

Plastic products undergo artificial and unintentional aging during daily use, causing the presence of aged microplastics (aMP). Humans are inevitably exposed to aMP. Liver is one of the critical target organs of MP through oral intake, however, limited research has focused on the hepatic toxicity of aMP compared to pristine MP (pMP). We utilized the human pluripotent stem cells-derived liver organoids (LOs) to compare the cytotoxicity of pristine polystyrene microplastics (pPS) (1 μm, carbonyl index 0.08) and aged polystyrene microplastics (aPS) (1 μm, carbonyl index 0.20) ranged from 20 to 200 ng/mL. Our findings indicate that aPS was more cytotoxic than pPS. We explored the disrupted iron homeostasis in terms of the [Fe2+] and [Fe3+] levels, iron storage and transport. A "vector-like effect" induced by aPS has been preliminarily suggested by the correlated change in total iron level and co-localization of PS and ferritin light chain (FTL) in the LOs following exposure to aPS and ferric ammonium citrate (FAC) individually and combinedly. In addition, we observed abnormal mitochondrial morphology, elevated lipid peroxidation, and declined GSH peroxidase activity, together with the declined expression of transferrin receptor (TFRC) and elevated expressions of SLC7A11, FTL. The gene handled iron transport and iron use were disrupted by aPS. Moreover, we employed FAC to introduce iron overload and Nacetylcysteine (NAC) to protect the lipid peroxidation. In aPS + FAC group, aggravated effects could be observed in aspects of [Fe2+] level, lipid peroxidation, and compromised expression levels of iron homeostasis-related markers, in contrast, in aPS + NAC group, most of changes recovered but the hepatocytoxicity remained. Specifically, a dimorphic change in elevated FTL and decreased ferritin heavy chain (FTH1) caused by 50 ng/mL aMP (57.33 ± 3.57 items/mL, equivalent to human intake level), indicated a specific response to low-dose aMP.

Concentration-Dependent Layer Exfoliation of Black Phosphorus by Human Serum Albumin and Its Corresponding Biocompatibility Change

Layered black phosphorus (LBP) is drawing increasing attention because of its excellent potential in biomedical applications. Properties and bioeffects of LBP depend on its layer number (LN). However, the variation of LN during applications, especially in organisms, is largely unknown. Herein, LBP is found to be exfoliated by human serum albumin (HSA) after the formation of protein coronas. The sorption of HSA on LBP exhibits multiple intermediate equilibrium and size-dependent capacity and is distinguished from traditional multilayer sorption. The loss of LN for LBP increases with the increase of HSA concentrations, e.g., 2, 4, and 6 layers of LBP are exfoliated at 35, 135, and 550 mg/L HSA, respectively. The energy distribution shows that at low HSA concentrations, exfoliation is mainly driven by electrostatic and hydrogen bond interactions. With middle or high HSA concentrations, exfoliation is mainly driven by p-π or hydrophobic interactions, respectively. Layer exfoliation causes the continuous emergence of an unsaturated LBP surface available for adsorbing further HSA, breaking previous sorption saturations. The complete exfoliation of LBP weakens cytotoxicity and promotes internalization to the A-549 cell line compared with pristine or less exfoliated LBP. This finding unveils the exfoliation mechanism of proteins toward LBP and is of benefit to evaluating application performance and biosafety of LBP.

High salinity promotes the photoaging of polystyrene microplastics with humic acid in seawater

The photoaging of microplastics (MPs) accumulated in the sea can be influenced by humic acid (HA). However, the role of salinity cannot be ignored, as it may potentially disrupt the interaction between MPs and HA, thereby altering the photoaging of MPs. Herein, this study investigated how salinity influences the effect of humic acid (HA, derived from lignite) on the photoaging of polystyrene microplastics (PS MPs) in artificial and natural seawater. The results revealed that HA promoted the photoaging of PS MPs under both low (5 PSU) and high salinity (35 PSU) in light conditions (L), reflected in the formation of fragments, the production of oxygen-containing functional groups (OH, CO, and OCO), and the increase in hydrophilicity of PS MPs. Furthermore, high salinity promoted the photoaging of PS MPs with HA more significantly, as evidenced by the similar indicators and the order of oxygen/carbon atom ratio (O/C): L-HA-High (0.15) > L-HA-Low (0.10) > Unaged (0.02). Interestingly, due to the reduction of electrostatic repulsion, the adsorption of HA on photoaged PS MPs in natural and artificial high salinity seawater was 1.77 mg/g and 0.39 mg/g, respectively, which was significantly higher than those PS MPs photoaged in the low salinity seawater. Furthermore, the electron spin resonance (ESR) results confirmed that more hydroxyl radicals (OH) were generated after adsorbing HA under high salinity conditions, thus promoting the fragmentation and oxidation of PS MPs. Overall, our findings highlight the crucial role of salinity in influencing the photoaging of MPs with HA and help to assess the marine risk of MPs accurately.

The first evidence of microplastic occurrence in mine water: The largest black coal mining area in the Czech Republic

Climate change is creating new challenges for water supply worldwide, making the search for new sources of water vital. As mine water could serve as a potential source, this study investigated the presence of microplastics in water from terminated deep mines in the largest coal basin in the Czech Republic, as well as in water from nearby shallow wells. The particles found were analyzed for size, polymer composition, color and morphology using the ImageJ tool, infrared spectroscopy with Fourier transform (FTIR) and an optical stereomicroscope with a digital camera. Microplastics were detected in all tested sites. Their range accounted for 2.5-17.5 items/L for mine water samples and 2.5-20 items/L for well samples, with fibers being the dominant type. The average width of particles from mine water and wells amounted to 58 µm; 71 µm, length to 655 µm; 501 µm and area to 22,067 µm2; 28,613 µm2, respectively. Blue color was prevalent, among materials, in both cases, plastic coated paper was found dominant to Polyethylene terephthalate (PET), Polyester (PES), Tetrafluoroethylene-perfluoro (Propyl Vinyl Ether) - Copolymer (TFE-PPVE), and polypropylene (PP). The research provides the first evidence of microplastics' presence in underground waters from deep mines and shallow wells in the same area. The data suggest that it is almost impossible to find underground water sources free of microplastic contamination. In this context, atmospheric contamination from mine ventilation and infiltration through terminated mines were identified as potential sources, while infiltration through soil and rock formations is unlikely given the geological composition. The results of this study can serve as a relevant basis for further research on microplastics in mine waters. Additionally, the conclusions can advance the development in remediation technologies of microplastics from deep underground waters and their implementation in practice, particularly in light of upcoming legislation.

Aging behavior of biodegradable polylactic acid microplastics accelerated by UV/H2O2 processes

The usage of biodegradable plastics is expanding annually due to worldwide plastic limits, resulting in a substantial number of microplastics (MPs) particles formed from biodegradable plastic products entering the aquatic environment. Until now, the environmental behaviors of these plastic product-derived MPs (PPDMPs) have remained unclear. In this work, commercially available polylactic acid (PLA) straws and PLA food bags were used to evaluate the dynamic aging process and environmental behavior of PLA PPDMPs under UV/H2O2 conditions. By combining scanning electron microscopy, two-dimensional (2D) Fourier transform infrared correlation spectroscopy (COS) and X-ray photoelectron spectroscopy, it was determined that the aging process of the PLA PPDMPs was slower than that of pure MPs. The 2D-COS analysis revealed that the response orders for the functional groups on the PLA MPs differed during the aging process. The results demonstrated that the oxygen-containing functional groups of the PLA PPDMPs were the first to react. Subsequently, the -C-H and -C-C- structural responses began, and the polymer backbone was ruptured by the aging process. However, the aging of the pure-PLA MPs started with a brief oxidation process and then breakage of the polymer backbones, followed by continuous oxidation. Moreover, compared to the PLA PPDMPs, the pure-PLA MPs exhibited a greater adsorption capacity, which was increased by 88% after aging, whereas those of the two PPDMPs only increased by 64% and 56%, respectively. This work provides new insights into the behaviors of biodegradable PLA MPs in aquatic environments, which is critical for assessing the environmental risks and management policies for degradable MPs.

Laboratory Studies about Microplastic Aging and Its Effects on the Adsorption of Chlorpyrifos

The constant change in microplastics (MP) due to exposure to environmental conditions leads to physical and chemical changes that enhance their ability to transport other pollutants, increasing the concern about their widespread presence in the environment. This work aimed to simulate the aging process of six MP (polyamide 6, unplasticized polyvinyl chloride, low-density polyethylene, polystyrene, polyethylene-co-vinyl acetate, polypropylene) in freshwater and seawater ecosystems at laboratory scale and evaluate its effects through optical microscope observation, Fourier transform infrared spectroscopy-Attenuated Total Reflectance (FTIR-ATR), Raman spectroscopy, and thermal gravimetric analysis (TGA). Through a combined experimental study of aged MP, the degradation by UV interaction was evidenced by the appearance of new infrared bands in the FTIR spectra assigned to ketones and hydroxyl groups. While Raman analysis and microscope images reveal the appearance of pores, wrinkles, and roughness in the MP surfaces. Variations in the temperature of the maximum weight loss of the MP were observed in the TGA analysis. The adsorption of chlorpyrifos (CPF), a common pesticide widely used in agriculture, by the pristine and aged MP was also studied. The highest affinity for CPF was observed for pristine LDPE and the lowest for PP. The batch adsorption studies revealed an increase in adsorption capacity as a consequence of the aging process for both MP. These results proved that the weathering effects caused changes in the behavior of MP, namely in the interaction with other pollutants.