Novel composite trachea grafts using 3-dimensional printing

Challenges and Opportunities in Developing Tracheal Substitutes for the Recovery of Long-Segment Defects

Tracheal resection and reconstruction procedures are necessary when stenosis, tracheomalacia, tumors, vascular lesions, or tracheal injury cause a tracheal blockage. Replacement with a tracheal substitute is often recommended when the trauma exceeds 50% of the total length of the trachea in adults and 30% in children. Recently, tissue engineering and other advanced techniques have shown promise in fabricating biocompatible tracheal substitutes with physical, morphological, biomechanical, and biological characteristics similar to native trachea. Different polymers and biometals are explored. Even with limited success with tissue-engineered grafts in clinical settings, complete healing of tracheal defects remains a substantial challenge due to low mechanical strength and durability of the graft materials, inadequate re-epithelialization and vascularization, and restenosis. This review has covered a range of reconstructive and regenerative techniques, design criteria, the use of bioprostheses and synthetic grafts for the recovery of tracheal defects, as well as the traditional and cutting-edge methods of their fabrication, surface modification for increased immuno- or biocompatibility, and associated challenges.

Identifying Molecular Pathophysiology and Potential Therapeutic Options in Iatrogenic Tracheal Stenosis

INTRODUCTION

While most patients with iatrogenic tracheal stenosis (ITS) respond to endoscopic ablative procedures, approximately 15% experience a recalcitrant, recurring disease course that is resistant to conventional management. We aimed to explore genetic profiles of patients with recalcitrant ITS to understand underlying pathophysiology and identify novel therapeutic options.

METHODS

We collected 11 samples of granulation tissue from patients with ITS and performed RNA sequencing. We identified the top 10 most highly up- and down-regulated genes and cellular processes that these genes corresponded to. For the most highly dysregulated genes, we identified potential therapeutic options that favorably regulate their expression.

RESULTS

The dysregulations in gene expression corresponded to hyperkeratinization (upregulation of genes involved in keratin production and keratinocyte differentiation) and cellular proliferation (downregulation of cell cycle regulating and pro-apoptotic genes). Genes involved in retinoic acid (RA) metabolism and signaling were dysregulated in a pattern suggesting local cellular RA deficiency. Consequently, RA also emerged as the most promising potential therapeutic option for ITS, as it favorably regulated seven of the ten most highly dysregulated genes.

CONCLUSION

This is the first study to characterize the role of hyperkeratinization and dysregulations in RA metabolism and signaling in the disease pathophysiology. Given the ability of RA to favorably regulate key genes involved in ITS, future studies must explore its efficacy as a potential therapeutic option for patients with recalcitrant ITS.

Recent Advances in the Application of 3D-Printing Bioinks Based on Decellularized Extracellular Matrix in Tissue Engineering

In recent years, 3D bioprinting with various types of bioinks has been widely used in tissue engineering to fabricate human tissues and organs with appropriate biological functions. Decellularized extracellular matrix (dECM) is an excellent bioink candidate because it is enriched with a variety of bioactive proteins and bioactive factors and can provide a suitable environment for tissue repair or tissue regeneration while reducing the likelihood of severe immune rejection. In this Review, we systematically review recent advances in 3D bioprinting and decellularization technologies and comprehensively detail the latest research and applications of dECM as a bioink for tissue engineering in various systems, with the aim of providing a reference for researchers in tissue engineering to better understand the properties of dECM bioinks.

Enhancing cartilage regeneration and repair through bioactive and biomechanical modification of 3D acellular dermal matrix

Acellular dermal matrix (ADM) shows promise for cartilage regeneration and repair. However, an effective decellularization technique that removes cellular components while preserving the extracellular matrix, the transformation of 2D-ADM into a suitable 3D scaffold with porosity and the enhancement of bioactive and biomechanical properties in the 3D-ADM scaffold are yet to be fully addressed. In this study, we present an innovative decellularization method involving 0.125% trypsin and 0.5% SDS and a 1% Triton X-100 solution for preparing ADM and converting 2D-ADM into 3D-ADM scaffolds. These scaffolds exhibit favorable physicochemical properties, exceptional biocompatibility and significant potential for driving cartilage regeneration in vitro and in vivo. To further enhance the cartilage regeneration potential of 3D-ADM scaffolds, we incorporated porcine-derived small intestinal submucosa (SIS) for bioactivity and calcium sulfate hemihydrate (CSH) for biomechanical reinforcement. The resulting 3D-ADM+SIS scaffolds displayed heightened biological activity, while the 3D-ADM+CSH scaffolds notably bolstered biomechanical strength. Both scaffold types showed promise for cartilage regeneration and repair in vitro and in vivo, with considerable improvements observed in repairing cartilage defects within a rabbit articular cartilage model. In summary, this research introduces a versatile 3D-ADM scaffold with customizable bioactive and biomechanical properties, poised to revolutionize the field of cartilage regeneration.

Surgical Innovations in Tracheal Reconstruction: A Review on Synthetic Material Fabrication

Background and Objectives: The aim of this review is to explore the recent surgical innovations in tracheal reconstruction by evaluating the uses of synthetic material fabrication when dealing with tracheomalacia or stenotic pathologies, then discussing the challenges holding back these innovations. Materials and Methods: A targeted non-systematic review of published literature relating to tracheal reconstruction was performed within the PubMed database to help identify how synthetic materials are utilised to innovate tracheal reconstruction. Results: The advancements in 3D printing to aid synthetic material fabrication have unveiled promising alternatives to conventional approaches. Achieving successful tracheal reconstruction through this technology demands that the 3D models exhibit biocompatibility with neighbouring tracheal elements by encompassing vasculature, chondral foundation, and immunocompatibility. Tracheal reconstruction has employed grafts and scaffolds, showing a promising beginning in vivo. Concurrently, the integration of resorbable models and stem cell therapy serves to underscore their viability and application in the context of tracheal pathologies. Despite this, certain barriers hinder its advancement in surgery. The intricate tracheal structure has posed a challenge for researchers seeking novel approaches to support its growth and regeneration. Conclusions: The potential of synthetic material fabrication has shown promising outcomes in initial studies involving smaller animals. Yet, to fully realise the applicability of these innovative developments, research must progress toward clinical trials. These trials would ascertain the anatomical and physiological effects on the human body, enabling a thorough evaluation of post-operative outcomes and any potential complications linked to the materials or cells implanted in the trachea.

Biomaterials Adapted to Vat Photopolymerization in 3D Printing: Characteristics and Medical Applications

Along with the rapid and extensive advancements in the 3D printing field, a diverse range of uses for 3D printing have appeared in the spectrum of medical applications. Vat photopolymerization (VPP) stands out as one of the most extensively researched methods of 3D printing, with its main advantages being a high printing speed and the ability to produce high-resolution structures. A major challenge in using VPP 3D-printed materials in medicine is the general incompatibility of standard VPP resin mixtures with the requirements of biocompatibility and biofunctionality. Instead of developing completely new materials, an alternate approach to solving this problem involves adapting existing biomaterials. These materials are incompatible with VPP 3D printing in their pure form but can be adapted to the VPP chemistry and general process through the use of innovative mixtures and the addition of specific pre- and post-printing steps. This review's primary objective is to highlight biofunctional and biocompatible materials that have been adapted to VPP. We present and compare the suitability of these adapted materials to different medical applications and propose other biomaterials that could be further adapted to the VPP 3D printing process in order to fulfill patient-specific medical requirements.

Evaluation of a decellularized bronchial patch transplant in a porcine model

Biological scaffolds for airway reconstruction are an important clinical need and have been extensively investigated experimentally and clinically, but without uniform success. In this study, we evaluated the use of a decellularized bronchus graft for airway reconstruction. Decellularized left bronchi were procured from decellularized porcine lungs and utilized as grafts for airway patch transplantation. A tracheal window was created and the decellularized bronchus was transplanted into the defect in a porcine model. Animals were euthanized at 7 days, 1 month, and 2 months post-operatively. Histological analysis, immunohistochemistry, scanning electron microscopy, and strength tests were conducted in order to evaluate epithelialization, inflammation, and physical strength of the graft. All pigs recovered from general anesthesia and survived without airway obstruction until the planned euthanasia timepoint. Histological and electron microscopy analyses revealed that the decellularized bronchus graft was well integrated with native tissue and covered by an epithelial layer at 1 month. Immunostaining of the decellularized bronchus graft was positive for CD31 and no difference was observed with immune markers (CD3, CD11b, myeloperoxidase) at two months. Although not significant, tensile strength was decreased after one month, but recovered by two months. Decellularized bronchial grafts show promising results for airway patch reconstruction in a porcine model. Revascularization and re-epithelialization were observed and the immunological reaction was comparable with the autografts. This approach is clinically relevant and could potentially be utilized for future applications for tracheal replacement.

Current Status and Future Outlook of Additive Manufacturing Technologies for the Reconstruction of the Trachea

Tracheal stenosis and defects occur congenitally and in patients who have undergone tracheal intubation and tracheostomy due to long-term intensive care. Such issues may also be observed during tracheal removal during malignant head and neck tumor resection. However, to date, no treatment method has been identified that can simultaneously restore the appearance of the tracheal skeleton while maintaining respiratory function in patients with tracheal defects. Therefore, there is an urgent need to develop a method that can maintain tracheal function while simultaneously reconstructing the skeletal structure of the trachea. Under such circumstances, the advent of additive manufacturing technology that can create customized structures using patient medical image data provides new possibilities for tracheal reconstruction surgery. In this study, the three-dimensional (3D) printing and bioprinting technologies used in tracheal reconstruction are summarized, and various research results related to the reconstruction of mucous membranes, cartilage, blood vessels, and muscle tissue, which are tissues required for tracheal reconstruction, are classified. The prospects for 3D-printed tracheas in clinical studies are also described. This review serves as a guide for the development of artificial tracheas and clinical trials using 3D printing and bioprinting.