Development of a Rational Design Space for Optimizing Mixing Conditions for Formation of Adhesive Mixtures for Dry-Powder Inhaler Formulations

Emerging Process Modeling Capabilities for Dry Powder Operations for Inhaled Formulations

Dry powder inhaler (DPI) products are commonly formulated as a mixture of micronized drug particles and large carrier particles, with or without additional fine particle excipients, followed by final powder filling into dose containment systems such as capsules, blisters, or reservoirs. DPI product manufacturing consists of a series of unit operations, including particle size reduction, blending, and filling. This review provides an overview of the relevant critical process parameters used for jet milling, high-shear blending, and dosator/drum capsule filling operations across commonly utilized instruments. Further, this review describes the recent achievements regarding the application of empirical and mechanistic models, especially discrete element method (DEM) simulation, in DPI process development. Although to date only limited modeling/simulation work has been accomplished, in the authors' perspective, process design and development are destined to be more modeling/simulation driven with the emphasis on evaluating the impact of material attributes/process parameters on process performance. The advancement of computational power is expected to enable modeling/simulation approaches to tackle more complex problems with better accuracy when dealing with real-world DPI process operations.

Exploring the influence of magnesium stearate content and mixing modality on the rheological properties and in vitro aerosolization of dry powder inhaler

Since carrier-based dry powder inhalers (DPIs) suffer from inadequate drug deposition in the lung, an increasing number of marketed products have added magnesium stearate (MgSt) to improve the aerosolization, dispersion, and stability against moisture of DPI. However, for carrier-based DPI, there is a lack of examination of the optimal MgSt content as well as the mixing modality, and there is also a need to verify the applicability of rheological properties to predict the in vitro aerosolization of DPI formulations containing MgSt. Therefore, in this work, DPI formulations were prepared using fluticasone propionate as a model drug and commercial crystalline lactose Respitose® SV003 as a carrier within 1% MgSt content, the effect of MgSt content on the rheological and aerodynamic properties were investigated. After the optimal MgSt content was determined, the effects of mixing modality, mixing order, and carrier size on formulation properties were further investigated. Meanwhile, correlations were established between rheological parameters and in vitro drug deposition parameters, and the contribution of rheological parameters were determined using principal component analysis (PCA). The results showed that the optimal content of MgSt in DPI formulations is 0.25%-0.5% under both high-shear and low-shear, using medium-sized carriers (D50 around 70 μm) and low-shear mixing are beneficial for improving in vitro aerosolization. Good linear relationships between powder rheological parameters such as basic flow energy (BFE), specific energy (SE), Permeability and fine particle fraction (FPF) were established, PCA showed that both flowability and adhesion are key properties affecting FPF. In conclusion, both MgSt content and mixing modality can influence rheological properties of the DPI, which can be used as a screeing tool for DPI formuluation and preparation process optimization.

Segregation in inhalable powders: Quantification of the effect of vibration on adhesive mixtures

The objective of this investigation was to study the effect of induced vibrations on adhesive mixtures containing budesonide and salbutamol sulphate as active pharmaceutical ingredients (APIs) and InhaLac 70 as carrier. A series of adhesive mixtures with varied API concentration (1-4%) was prepared for each API. Half of the adhesive mixture was stressed on a vibrating sieve under conditions resembling hopper flow. Based on scanning electron micrographs, it was concluded that InhaLac 70 contains particles of two distinct shapes, one irregular with groves and valleys and the other more regular with well defined edges. The dispersibility of the control and stressed mixtures was studied using a next generation impactor. The stressed mixtures containing 1 and 1.5% API displayed a significant reduction in fine particle dose (FPD) compared to the control. The reduction in FPD resulted from a loss of API from the adhesive mixture during vibration and as a consequence of restructuring and self agglomeration resulting in reduced dispersibility. However, no significant difference was observed for mixtures with larger weight fractions of API (2 and 4% API) but these have a drawback of reduced fine particle fraction (FPF). It is concluded that vibrations induced on the adhesive mixtures during handling potentially have a significant effect on the dispersibility of the API and the total amount of drug delivered to the lungs.

Twin-Screw Continuous Mixing Can Produce Dry Powder Inhalation Mixtures for Pulmonary Delivery

The feasibility of twin-screw corotating extruder as a continuous process mixer to prepare dry powder inhalation (DPI) powders was investigated. Interactive mixtures of 1% micronized budesonide, 0.3% magnesium stearate and 98.7% alpha-lactose monohydrate were manufactured using a Leistritz Nano-16 extruder at various processing conditions. One set of GFM (grooved mixing) elements were included in the screw profile to provide distributive mixing of conveyed powders with the goal of resulting in a homogeneous mixture. Residence time in the twin-screw mixer was modelled to quantify mixing efficiency. Comparative powders were also prepared using either low or high-shear batch mixing to compare the effect of mixing methods on the properties of the budesonide dry powder inhalation formulation. Twin screw mixing results in homogeneous mixtures with aerosol performance comparable to that of high-shear batch mixing. Scanning electron microscopy confirmed that twin screw mixing produces particles with morphology like that of low and high-shear batch mixing. X-ray diffraction (XRD) analysis verified that there was no form change of the drug due to twin-screw processing. Statistical regression was used to probe the relationship between twin screw mixing process parameters such as screw speed and feed rate and aerosol performance. The twin screw mixing process was found to be robust, as no significant differences in aerosol performance were found for various processing parameters.

Recent developments in lactose blend formulations for carrier-based dry powder inhalation

Lactose is the most commonly used excipient in carrier-based dry powder inhalation (DPI) formulations. Numerous inhalation therapies have been developed using lactose as a carrier material. Several theories have described the role of carriers in DPI formulations. Although these theories are valuable, each DPI formulation is unique and are not described by any single theory. For each new formulation, a specific development trajectory is required, and the versatility of lactose can be exploited to optimize each formulation. In this review, recent developments in lactose-based DPI formulations are discussed. The effects of varying the material properties of lactose carrier particles, such as particle size, shape, and morphology are reviewed. Owing to the complex interactions between the particles in a formulation, processing adhesive mixtures of lactose with the active ingredient is crucial. Therefore, blending and filling processes for DPI formulations are also reviewed. While the role of ternary agents, such as magnesium stearate, has increased, lactose remains the excipient of choice in carrier-based DPI formulations. Therefore, new developments in lactose-based DPI formulations are crucial in the optimization of inhalable medicine performance.

Mixing of dry powders for inhalation: A review

The process of solids mixing is applied across a considerable range of industries. Pharmaceutical science is one of those industries that utilizes solids mixing extensively. Specifically, solids mixing as a key factor in the preparation of dry powder inhalers using the ordered mixing process will be discussed here. This review opens with a history of dry powder mixing theory, continues to ordered mixing in the preparation for dry powder inhalers, details key interparticulate interactions, explains formulation components for dry powder blends, and finally discusses different types of mixers used in the production of dry powder blends for inhalation. Lastly, the authors offer some suggestions for future work on this topic.

Effect of magnesium stearate surface coating method on the aerosol performance and permeability of micronized fluticasone propionate

In this study, we evaluated the aerodynamic performance, dissolution, and permeation behavior of micronized fluticasone propionate (FP) and magnesium stearate (MgSt) binary mixtures. Micronized FP was dry mixed with 2% w/w MgSt using a tumble mixer and a resonant acoustic mixer (RAM) with and without heating. The mixing efficacy was determined by X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) analysis. Additional techniques were used to determine powder properties such as the dynamic vapor sorption (DVS), particle size distribution (PSD) by laser diffraction light scattering, and particle surface properties by scanning electron microscope (SEM). The aerodynamic performance was studied by the next-generation impactor (NGI) using drug-loaded capsules in a PlastiApi® device. Physiochemical properties such as porosity, particle size distribution, and surface area of the formulations were studied with adsorption and desorption curves fitted to several well-known models including Brunauer-Emmett-Teller (BET), Barret Joyner Halenda (BJH), and the density functional theory (DFT). The dissolution behavior of the formulations collected on the transwell inserts incorporated into stages 3, 5, and 7 of the NGI with a membrane providing an air interface was evaluated. Drug permeability of formulations was assessed by directly depositing particles on Calu-3 cells at the air-liquid interface (ALI). Drug concentration was determined by LC-MS/MS. A better MgSt mixing on micronized FP particles was achieved by mixing with a RAM with and without heating than with a tumble mixer. A significant concomitant increase in the % of emitted dose and powder aerosol performance was observed after MgSt mixing. Formulation 4 (RAM mixing at room temperature) showed the highest rate of permeability and correlation with dissolution profile. The results show that the surface enrichment of hydrophobic MgSt improved aerosolization properties and the dissolution and permeability rate of micronized FP by reducing powder agglomerations. A simple low-shear acoustic dry powder mixing method was found to be efficient and substantially improved the powder aerosolization properties and enhanced dissolution and permeability rate.

Mixing of low-dose cohesive drug and overcoming of pre-blending step using a new gentle-wing high-shear mixer granulator

The objective of this study was to examine the influence of drug amount and mixing time on the homogeneity and content uniformity of a low-dose drug formulation during the dry mixing step using a new gentle-wing high-shear mixer. Moreover, the study investigated the influence of drug incorporation mode on the content uniformity of tablets manufactured by different methods. Albuterol sulfate was selected as a model drug and was blended with the other excipients at two different levels, 1% w/w and 5% w/w at impeller speed of 300 rpm and chopper speed of 3000 rpm for 30 min. Utilizing a 1 ml unit side-sampling thief probe, triplicate samples were taken from nine different positions in the mixer bowl at selected time points. Two methods were used for manufacturing of tablets, direct compression and wet granulation. The produced tablets were sampled at the beginning, middle, and end of the compression cycle. An analysis of variance analysis indicated the significant effect (p < .05) of drug amount on the content uniformity of the powder blend and the corresponding tablets. For 1% w/w and 5% w/w formulations, incorporation of the drug in the granulating fluid provided tablets with excellent content uniformity and very low relative standard deviation (∼0.61%) during the whole tableting cycle compared to direct compression and granulation method with dry incorporation mode of the drug. Overall, gentle-wing mixer is a good candidate for mixing of low-dose cohesive drug and provides tablets with acceptable content uniformity with no need for pre-blending step.

Relationships between surface coverage ratio and powder mechanics of binary adhesive mixtures for dry powder inhalers

The aim of this paper was to study relationships between the content of fine particles and the powder mechanics of binary adhesive mixtures and link these relationships to the blend state. Mixtures with increasing amounts of fine particles (increasing surface coverage ratios (SCR)) were prepared using Lactopress SD as carrier and micro particles of lactose as fines (2.7 µm). Indicators of unsettled bulk density, compressibility and flowability were derived and the blend state was visually examined by imaging. The powder properties studied showed relationships to the SCR characterised by stages. At low SCR, the fine particles predominantly gathered in cavities of the carriers, giving increased bulk density and unchanged or improved flow. Thereafter, increased SCR gave a deposition of particles at the enveloped carrier surface with a gradually more irregular adhesion layer leading to a reduced bulk density and a step-wise reduced flowability. The mechanics of the mixtures at a certain stage were dependent on the structure and the dynamics of the adhesion layer and transitions between the stages were controlled by the evolution of the adhesion layer. It is advisable to use techniques based on different types of flow in order to comprehensively study the mechanics of adhesive mixtures.

A New Role of Fine Excipient Materials in Carrier-Based Dry Powder Inhalation Mixtures: Effect on Deagglomeration of Drug Particles During Mixing Revealed

The potential of fine excipient materials to improve the performance of carrier-based dry powder inhalation mixtures is well acknowledged. The mechanisms underlying this potential are, however, open to question till date. Elaborate understanding of these mechanisms is a requisite for rational rather than empirical development of ternary dry powder inhalation mixtures. While effects of fine excipient materials on drug adhesion to and detachment from surfaces of carrier particle have been extensively investigated, effects on other processes, such as carrier-drug mixing, capsule/blister/device filling, or aerosolization in inhaler devices, have received little attention. We investigated the influence of fine excipient materials on the outcome of the carrier-drug mixing process. We studied the dispersibility of micronized fluticasone propionate particles after mixing with α-lactose monohydrate blends comprising different fine particle concentrations. Increasing the fine (D < 10.0 μm) excipient fraction from 1.84 to 8.70% v/v increased the respirable drug fraction in the excipient-drug mixture from 56.42 to 67.80% v/v (p < 0.05). The results suggest that low concentrations of fine excipient particles bind to active sites on and fill deep crevices in coarse carrier particles. As the concentration of fine excipient particles increases beyond that saturating active sites, they fill the spaces between and adhere to the surfaces of coarse carrier particles, creating projections and micropores. They thereby promote deagglomeration of drug particles during carrier-drug mixing. The findings pave the way for a comprehensive understanding of contributions of fine excipient materials to the performance of carrier-based dry powder inhalation mixtures.

Mechanistic investigation of mixing and segregation of ordered mixtures: experiments and numerical simulations

Pulmonary delivery of cohesive and micronized drugs through dry powder inhalers (DPIs) is traditionally achieved through the formation of ordered mixtures. In order to improve the mechanistic understanding of formation of ordered mixtures, the system consisting of micronized lactose (AZFL, representative of an active pharmaceutical ingredient) and a coarse particle carrier (LH100) is investigated as a function of different process and material variables in a high shear mixer (HSM) and in a low shear double cone (DCN) blender, using both experimental and numerical methods. Process insight is developed using a Discrete Element Method (DEM) based numerical model which could predict the formation of ordered mixtures in the two blenders and was verified against experimental determinations. Spatial and temporal evolution of granular flow are visualized and quantified in silico to reveal distinguishing features of both blenders to aid in rational selection of blenders and process parameters.