Synthesis and Evaluation of Boronated Chitosan as a Mucoadhesive Polymer for Intravesical Drug Delivery

Recent advances in modified chitosan-based drug delivery systems for transmucosal applications: A comprehensive review

Recently, transmucosal drug delivery systems (TDDSs) have been extensively studied because they protect therapeutic agents from degradation; improve drug residence time at the mucosal membranes; and facilitate sustained drug release for a prolonged period. Chitosan is a well-researched polymeric excipient due to its biocompatibility, non-toxicity, biodegradability, mucoadhesive, antimicrobial, and low immunogenicity. Its limited mucoadhesiveness in the physiological environment necessitated its chemical modification. This review highlights the recent advances in the chemical modification of chitosan with various chemical groups to generate various functionalized chitosan derivatives, such as thiolated, acrylated, methacrylated, boronated, catechol, and maleimide-functionalized chitosans with superior mucoadhesive capabilities compared to the parent chitosan. Moreover, it presents the different prepared dosage forms, such as tablets, hydrogels, films, micro/nanoparticles, and liposomes/niosomes for drug administration within various mucosal routes including oral, buccal, nasal, ocular, colonic, intravesical, and vaginal routes. The reported data from preclinical studies of these pharmaceutical formulations have revealed the controlled and target-specific delivery of therapeutics because of their formation of covalent bonds with thiol groups on the mucosal surface. All functionalized chitosan derivatives exhibited long drug residence time on mucosal surfaces and sustainable drug release with excellent cellular permeability, drug efficacy, and biocompatibility. These promising data could be translated from the research laboratories to the clinics with consistent and intensive research effort.

Enhancing Mucoadhesive Properties of Gelatin through Chemical Modification with Unsaturated Anhydrides

Gelatin is a water-soluble natural polyampholyte with poor mucoadhesive properties. It has traditionally been used as a major ingredient in many pharmaceuticals, including soft and hard capsules, suppositories, tissue engineering, and regenerative medicine. The mucoadhesive properties of gelatin can be improved by modifying it through conjugation with specific adhesive unsaturated groups. In this study, gelatin was modified by reacting with crotonic, itaconic, and methacrylic anhydrides in varying molar ratios to yield crotonoylated-, itaconoylated-, and methacryloylated gelatins (abbreviated as Gel-CA, Gel-IA, and Gel-MA, respectively). The successful synthesis was confirmed using 1H NMR, FTIR spectroscopies, and colorimetric TNBSA assay. The effect of chemical modification on the isoelectric point was studied through viscosity and electrophoretic mobility measurements. The evolution of the storage (G') and loss (G'') moduli was employed to determine thermoreversible gelation points of modified and unmodified gelatins. The safety of modified gelatin derivatives was assessed with an in vivo slug mucosal irritation test (SMIT) and an in vitro MTT assay utilizing human pulmonary fibroblasts cell line. Two different model dosage forms, such as physical gels and spray-dried microparticles, were prepared and their mucoadhesive properties were evaluated using a flow-through technique with fluorescent detection and a tensile test with ex vivo porcine vaginal tissues and sheep nasal mucosa. Gelatins modified with unsaturated groups exhibited superior mucoadhesive properties compared to native gelatin. The enhanced ability of gelatin modified with these unsaturated functional groups is due to the formation of covalent bonds with cysteine-rich subdomains present in the mucin via thiol-ene click Michael-type addition reactions occurring under physiologically relevant conditions.

Synthesis, properties, and applications of a polyampholyte hydroxypropyl chitosan derivative with the phenylboronic acid functional group

Phenylboronic acid (PBA) groups are effective in building glucose-responsive drug delivery systems. Chitosan (CS) offers distinct advantages in the construction of PBA-based biomaterials, such as biodegradability and biocompatibility. However, challenges still persist due to the limited solubility of CS. This study proposes an efficient approach to introduce PBA groups into CS chains within 1 h via the O-(7-azabenzotriazol-1-yl)-N,N,N',N'-tetramethyluronium hexafluorophosphate (HATU)-mediated amidation between 3-carboxyphenylboronic acid (CPBA) and O-hydroxypropyl chitosan (HPCS). The results showed that a wide range of substitution degrees, from 0.15 to 0.78, could be finely controlled by the amount of CPBA added. Furthermore, the obtained novel carboxyphenylboronic acid-grafted hydroxypropyl chitosan (PBA-HPCS) derivative showed enhanced crystallinity and thermostability compared to HPCS, and it demonstrated solubility in an alkaline solution. Based on the reversible bonding between the boronic acid group and cis-1,2/1,3-diols, PBA-HPCS was successfully used as an efficient crosslinker for the preparation of hydrogels incorporating sorbitol and polyhydroxy polymers, such as guar gum and polyvinyl alcohol. These hydrogels exhibited rapid gelation, rapid self-healing, injectability, and responsiveness to glucose and pH. These findings suggest that PBA-HPCS holds promise for advancing the development of PBA-based biomaterials.

Transfer-based nuclear magnetic resonance uncovers unique mechanisms for protein-polymer and protein-nanoparticle binding behavior

Nanoparticle-based drug delivery systems have shown increasing popularity as a means to improve patient outcomes by improving the effectiveness of active pharmaceutical ingredients (APIs). Similarly, nanoparticles have shown success in targeting alternative routes of API administration, such as applying mucoadhesion or mucopenetration to mucosal drug delivery to enhance uptake. While there are many promising examples of mucoadhesive nanomedicines in literature, there are also many examples of contradictory mucoadhesive binding behavior, most prominently in cases using the same nanoparticle materials. We have uncovered mechanistic insights in polymer-protein binding systems using nOe transfer-based NMR and sought to leverage them to explore nanoparticle-protein interactions. We tested several polymer-coated nanoparticles and micellar polymer nanoparticles and evaluated their binding with mucin proteins. We uncovered that the composition and interaction intimacy of polymer moieties that promote mucin binding change when the polymers are incorporated onto nanoparticle surfaces compared to polymer in solution. This change from solution state to nanoparticle coating can enable switching of behavior of these materials from inert to binding, as we observed in polyvinyl pyrrolidone. We also found the nanoparticle core was influential in determining the binding fate of polymer materials, whereas the nanoparticle size did not possess a clear correlation in the ranges we tested (60-270 nm). These experiments demonstrate that identical polymers may switch their binding behavior to mucin as a function of conformational changes that are induced by incorporating the polymers onto the surface of nanoparticles. These NMR-derived insights could be further leveraged to optimize nanoparticle formulations and guide polymer-mediated mucoadhesion.

Benzoxaborole-grafted high molecular weight chitosan from prawn: Synthesis, characterization, target recognition and antibacterial properties

Boronated polymers are in the focus of dynamic functional materials due to the versatility of the B-O interactions and accessibility of precursors. Polysaccharides are highly biocompatible, and therefore, an attractive platform for anchoring boronic acid groups for further bioconjugation of cis-diol containing molecules. We report for the first time the introduction of benzoxaborole by amidation of the amino groups of chitosan improving solubility and introducing cis-diol recognition at physiological pH. The chemical structures and physical properties of the novel chitosan-benzoxaborole (CS-Bx) as well as two phenylboronic derivatives synthesized for comparison, were characterized by nuclear magnetic resonance (NMR), infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic light scattering (DLS), rheology and optical spectroscopic methods. The novel benzoxaborole grafted chitosan was perfectly solubilized in an aqueous buffer at physiological pH, extending the possibilities of boronated materials derived from polysaccharides. The dynamic covalent interaction between boronated chitosan and model affinity ligands, was studied by means of spectroscopy methods. A glycopolymer derived from poly(isobutylene-alt-anhydride) was also synthesized to study the formation of dynamic assemblies with benzoxaborole-grafted chitosan. A first approximation to apply fluorescence microscale thermophoresis for the interactions of the modified polysaccharide is also discussed. Additionally, the activity of CSBx against bacterial adhesion was studied.

Chitosan Particles Complexed with CA5-HIF-1α Plasmids Increase Angiogenesis and Improve Wound Healing

Wound therapies involving gene delivery to the skin have significant potential due to the advantage and ease of local treatment. However, choosing the appropriate vector to enable successful gene expression while also ensuring that the treatment's immediate material components are conducive to healing itself is critical. In this study, we utilized a particulate formulation of the polymer chitosan (chitosan particles, CPs) as a non-viral vector for the delivery of a plasmid encoding human CA5-HIF-1α, a degradation resistant form of HIF-1α, to enhance wound healing. We also compared the angiogenic potential of our treatment (HIF/CPs) to that of chitosan particles containing only the plasmid backbone (bb/CPs) and the chitosan particle vector alone (CPs). Our results indicate that chitosan particles exert angiogenic effects that are enhanced with the human CA5-HIF-1α-encoded plasmid. Moreover, HIF/CPs enhanced wound healing in diabetic db/db mice (p < 0.01), and healed tissue was found to contain a significantly increased number of blood vessels compared to bb/CPs (p < 0.01), CPs (p < 0.05) and no-treatment groups (p < 0.01). Thus, this study represents a method of gene delivery to the skin that utilizes an inherently pro-wound-healing polymer as a vector for plasmid DNA that has broad application for the expression of other therapeutic genes.

Formulation and evaluation of paclitaxel-loaded boronated chitosan/alginate nanoparticles as a mucoadhesive system for localized cervical cancer drug delivery

Cervical cancer remains a significant global health challenge, and there is a need for innovative drug delivery systems to improve the efficacy of anticancer drugs. In this study, we developed and evaluated boronated chitosan/alginate nanoparticles (BCHIALG NPs) as a localized mucoadhesive drug delivery system for cervical cancer. Boronated chitosan (BCHI) was synthesized by incorporating 4-carboxyphenylboronic acid onto chitosan (CHI), and boronated chitosan/alginate nanoparticles (BCHIALG NPs) with varying polymer ratios were prepared using an ionic gelation method. The physical properties, drug loading capacity/encapsulation efficiency, mucoadhesive properties, and in vitro drug release profile of the nanoparticles were evaluated. The BCHIALG NPs exhibited a size of less than 390 nm and demonstrated high drug encapsulation efficiency (98.1 - 99.8%) and loading capacity (326.9 - 332.7 μg/mg). Remarkably, the BCHIALG NPs containing 0.03% boronated chitosan and 0.07% alginate showed superior mucoadhesive capability compared to CHIALG NPs, providing sustained drug release and they showed the most promising results as a transmucosal drug delivery system for hydrophobic drugs like paclitaxel (PTX). To the best of our knowledge, this is the first report investigating BCHIALG NPs for cervical drug delivery. The new mucoadhesive paclitaxel formulation could offer an innovative strategy for improving cervical cancer treatment.

Tannic acid-coated cellulose nanocrystals with enhanced mucoadhesive properties for aquaculture

Mucoadhesion can be exploited as a strategy to target drug and nutrient delivery to the outer mucosal layers of fish in aquaculture farms. Cellulose nanocrystals (CNC) derived from cellulose pulp fibers can interact with the mucosal membranes via hydrogen bonding, however, their mucoadhesive properties are weak and should be enhanced. In this study, CNC were coated with tannic acid (TA), a plant polyphenol with excellent wet-resistant bioadhesive properties, to strengthen their mucoadhesive capability. The optimal CNC:TA mass ratio was determined to be 20:1. The modified CNCs were 190 ± 40 nm in length and 21 ± 4 nm wide and displayed excellent colloidal stability, with a zeta potential of -35 mV. Turbidity titrations and rheological measurements revealed that the modified CNC possessed superior mucoadhesive properties compared to pristine CNC. Modification with tannic acid introduced additional functional groups for stronger hydrogen bond formation and hydrophobic interactions with mucin, which was confirmed by a large reduction in viscosity enhancement values in the presence of chemical blockers (urea and Tween80). The enhanced mucoadhesion of the modified CNC could be utilized for the fabrication of a mucoadhesive drug delivery system to promote sustainable aquaculture practices.

Preparation of mucoadhesive methacrylated chitosan nanoparticles for delivery of ciprofloxacin

Mucoadhesive polymers and their nanoparticles have attracted a lot of attention in pharmaceutical applications, especially transmucosal drug delivery (TDD). Mucoadhesive polysaccharide-based nanoparticles, particularly chitosan, and its derivatives, are widely used for TDD owing to their outstanding features such as biocompatibility, mucoadhesive, and absorption-enhancing properties. Herein, this study aimed to design potential mucoadhesive nanoparticles for the delivery of ciprofloxacin based on methacrylated chitosan (MeCHI) using the ionic gelation method in the presence of sodium tripolyphosphate (TPP) and compared them with the unmodified chitosan nanoparticles. In this study, different experimental conditions including the polymer to TPP mass ratios, NaCl, and TPP concentration were changed to achieve unmodified and MeCHI nanoparticles with the smallest particle size and lowest polydispersity index. At 4:1 polymer /TPP mass ratio, both chitosan and MeCHI nanoparticles had the smallest size (133 ± 5 nm and 206 ± 9 nm, respectively). MeCHI nanoparticles were generally larger and slightly more polydisperse than the unmodified chitosan nanoparticles. Ciprofloxacin-loaded MeCHI nanoparticles had the highest encapsulation efficiency (69 ± 13 %) at 4:1 MeCHI /TPP mass ratio and 0.5 mg/mL TPP, but similar encapsulation efficiency to that of their chitosan counterpart at 1 mg/mL TPP. They also provided a more sustained and slower drug release compared to their chitosan counterpart. Additionally, the mucoadhesion (retention) study on sheep abomasum mucosa showed that ciprofloxacin-loaded MeCHI nanoparticles with optimized TPP concentration had better retention than the unmodified chitosan counterpart. The percentage of the remained ciprofloxacin-loaded MeCHI and chitosan nanoparticles on the mucosal surface was 96 % and 88 %, respectively. Therefore, MeCHI nanoparticles have an excellent potential for applications in drug delivery.

Mucoadhesive drug delivery systems: a promising noninvasive approach to bioavailability enhancement. Part II: formulation considerations

INTRODUCTION

Mucoadhesive drug delivery systems (MDDS) are specifically designed to interact and bind to the mucosal layer of the epithelium for localized, prolonged, and/or targeted drug delivery. Over the past 4 decades, several dosage forms have been developed for localized as well as systemic drug delivery at different anatomical sites.

AREAS COVERED

The objective of this review is to provide a detailed understanding of the different aspects of MDDS. Part II describes the origin and evolution of MDDS, followed by a discussion of the properties of mucoadhesive polymers. Finally, a synopsis of the different commercial aspects of MDDS, recent advances in the development of MDDS for biologics and COVID-19 as well as future perspectives are provided.

EXPERT OPINION

A review of the past reports and recent advances reveal MDDS as highly versatile, biocompatible, and noninvasive drug delivery systems. The rise in the number of approved biologics, the introduction of newer highly efficient thiomers, as well as the recent advances in the field of nanotechnology have led to several excellent applications of MDDS, which are predicted to grow significantly in the future.

Mechanisms and strategies to enhance penetration during intravesical drug therapy for bladder cancer

Bladder cancer (BCa) is one of the most prevalent cancers worldwide. The effectiveness of intravesical therapy for bladder cancer, however, is limited due to the short dwell time and the presence of permeation barriers. Considering the histopathological features of BCa, the permeation barriers for drugs to transport across consist of a mucus layer and a nether tumor physiological barrier. Mucoadhesive delivery systems or mucus-penetrating delivery systems are developed to enhance their retention in or penetration across the mucus layer, but delivery systems that are capable of mucoadhesion-to-mucopenetration transition are more efficient to deliver drugs across the mucus layer. For the tumor physiological barrier, delivery systems mainly rely on four types of penetration mechanisms to cross it. This review summarizes the classical and latest approaches to intravesical drug delivery systems to penetrate BCa.

Surface Modification of Silica Particles with Adhesive Functional Groups or Their Coating with Chitosan to Improve the Retention of Toothpastes in the Mouth

Silica is widely used in the oral care formulations to act as an abrasive and to give the products its distinct physical properties. In this study, silica particles were synthesized using a co-condensation of tetraethyl orthosilicate with a series of functional silane compounds [(3-mercaptopropyl)trimethoxysilane, (3-glycidyloxypropyl)trimethoxysilane, and (3-acryloxypropyl)trimethoxysilane)]. The surface of the particles based on tetraethyl orthosilicate and (3-glycidyloxypropyl)trimethoxysilane was then further modified with 3-aminophenylboronic acid. Commercial Aerosil R972 Pharma silica particles were also coated with chitosan. Additionally, commercially available (3-maleimido)propyl-functionalized silica particles were used in this study. All these functionalized silica particles were incorporated into toothpaste formulations, and their retentive properties were tested on ex vivo sheep tongue mucosa models using fluorescent microscopy-based flow-through techniques. Those surfaces with chitosan, phenylboronic acid, and acryloyl groups were shown to provide a significant improvement in the retention of the oral care formulations during the retention testing. The retention of toothpastes containing silica functionalized with maleimide and thiol groups was also superior compared to that of unmodified silica particles. This study synthesized and tested a range of silica particles and demonstrated that the functionalized silica incorporated into toothpastes can significantly improve the retention of these formulations on oral mucosal surfaces.

The Progress of Chitosan-Based Nanoparticles for Intravesical Bladder Cancer Treatment

Bladder cancer (BC) is the most frequently occurring cancer of the urinary system, with non-muscle-invasive bladder cancer (NMIBC) accounting for 75-85% of all the bladder cancers. Patients with NMIBC have a good survival rate but are at high risk for tumor recurrence and disease progression. Intravesical instillation of antitumor agents is the standard treatment for NMIBC following transurethral resection of bladder tumors. Chemotherapeutic drugs are broadly employed for bladder cancer treatment, but have limited efficacy due to chemo-resistance and systemic toxicity. Additionally, the periodic voiding of bladder and low permeability of the bladder urothelium impair the retention of drugs, resulting in a weak antitumoral response. Chitosan is a non-toxic and biocompatible polymer which enables better penetration of specific drugs to the deeper cell layers of the bladder as a consequence of temporarily abolishing the barrier function of urothelium, thus offering multifaceted biomedical applications in urinary bladder epithelial. Nowadays, the rapid development of nanoparticles significantly improves the tumor therapy with enhanced drug transport. This review presents an overview on the state of chitosan-based nanoparticles in the field of intravesical bladder cancer treatment.

Phenylboronic acid modified hydrogel materials and their potential for use in contact lens based drug delivery

The use of hydrogel-based contact lens materials holds promise for ophthalmic drug delivery by increasing drug residence time, improving drug bioavailability, reducing administration frequency, and enhancing special site targeting. Issues such as ease of manufacturing, lens comfort and appropriate release kinetics must be considered. Furthermore, the high water content of hydrogel materials can result in rapid and poorly controlled release kinetics. Herein, we modified common hydrogels used in contact lens manufacturing with phenylboronic acid (PBA). PBA addresses these material design issues since boronate esters are easily formed when boron acid and diols interact, opening up a pathway for simple modification of the model lens materials with saccharide based wetting agents. The wetting agents have the potential to improve lens comfort. Furthermore, the hydrophobicity of PBA and the presence of diols can be useful to help control drug release kinetics. In this work, polymerizable 3-(acrylamido)phenylboronic acid (APBA) was synthesized and incorporated into various hydrogels used in contact lens applications, including poly(2-hydroxyethylmethacrylate) (PHEMA), polyvinylpyrrolidone (PVP) and poly(N,N-dimethyl acrylamide) (PDMA) using UV induced free radical polymerization. The APBA structure and its incorporation into the hydrogel materials were confirmed by NMR and FTIR. The materials were shown to interact with and bind wetting agents such as hyaluronan (HA) and hydroxypropyl guar (HPG) by simple soaking in an aqueous solution. The equilibrium water content of the modified materials was characterized, demonstrating that most materials are still in the appropriate range after the introduction of the hydrophobic PBA. The release of three model ophthalmic drugs with varying hydrophilicity, atropine, atropine sulfate and dexamethasone, was examined. The presence of PBA in the materials was found to promote sustained drug release due to its hydrophobic nature. The results suggest that the modification of the materials with PBA was able to not only provide a mucoadhesive property that enhanced wetting agent interactions with the materials, but had the potential to alter drug release. Thus, the modification of contact lens materials with mucoadhesive functionality may be useful in the design of hydrogel contact lenses for ophthalmic drug release and wetting agent binding.

Mucoadhesive Polymers and Their Applications in Drug Delivery Systems for the Treatment of Bladder Cancer

Bladder cancer (BC) is the tenth most common type of cancer worldwide, affecting up to four times more men than women. Depending on the stage of the tumor, different therapy protocols are applied. Non-muscle-invasive cancer englobes around 70% of the cases and is usually treated using the transurethral resection of bladder tumor (TURBIT) followed by the instillation of chemotherapy or immunotherapy. However, due to bladder anatomy and physiology, current intravesical therapies present limitations concerning permeation and time of residence. Furthermore, they require several frequent catheter insertions with a reduced interval between doses, which is highly demotivating for the patient. This scenario has encouraged several pieces of research focusing on the development of drug delivery systems (DDS) to improve drug time residence, permeation capacity, and target release. In this review, the current situation of BC is described concerning the disease and available treatments, followed by a report on the main DDS developed in the past few years, focusing on those based on mucoadhesive polymers as a strategy. A brief review of methods to evaluate mucoadhesion properties is also presented; lastly, different polymers suitable for this application are discussed.

Nano-Formulation Based Intravesical Drug Delivery Systems: An Overview of Versatile Approaches to Improve Urinary Bladder Diseases

Intravesical drug delivery is a direct drug delivery approach for the treatment of various bladder diseases. The human urinary bladder has distinctive anatomy, making it an effective barrier against any toxic agent seeking entry into the bloodstream. This screening function of the bladder derives from the structure of the urothelium, which acts as a semi-permeable barrier. However, various diseases related to the urinary bladder, such as hyperactive bladder syndrome, interstitial cystitis, cancer, urinary obstructions, or urinary tract infections, can alter the bladder’s natural function. Consequently, the intravesical route of drug delivery can effectively treat such diseases as it offers site-specific drug action with minimum side effects. Intravesical drug delivery is the direct instillation of medicinal drugs into the urinary bladder via a urethral catheter. However, there are some limitations to this method of drug delivery, including the risk of washout of the therapeutic agents with frequent urination. Moreover, due to the limited permeability of the urinary bladder walls, the therapeutic agents are diluted before the process of permeation, and consequently, their efficiency is compromised. Therefore, various types of nanomaterial-based delivery systems are being employed in intravesical drug delivery to enhance the drug penetration and retention at the targeted site. This review article covers the various nanomaterials used for intravesical drug delivery and future aspects of these nanomaterials for intravesical drug delivery.

Recent advances in functionally modified polymers for mucoadhesive drug delivery

Novel methods for the delivery of drugs other than the conventional method of oral administration have been a thrust area of research for a few decades. Mucoadhesive delivery of drugs opened up a new domain where rapid and patient-friendly delivery of drugs can be achieved. Delivery of drugs through the mucosal sites such as buccal, nasal, ocular, sublingual, rectal and vaginal facilitates bypassing the first-pass metabolism and the drug reaches the systemic circulation directly. This helps to increase the bioavailability of the drug. The study of the chemical characteristics of polymers with mucoadhesive properties and how the molecules or the pharmaceuticals are transported across the mucosa is very much needed for the advancement of research in this field. And at the same time, it is very pertinent to know about the anatomy and the physiology of the mucosal tissue and its variation in different regions of the body. In this review, we try to present a comprehensive understanding of relevant topics of mucoadhesion giving more emphasis on the mechanism of transport of drugs across mucosa, and different possible functional modifications of polymers to enhance the property of mucoadhesion.

Current Researches on Nanodrug Delivery Systems in Bladder Cancer Intravesical Chemotherapy

Bladder cancer is one of the most common malignant tumors in urinary system. Intravesical chemotherapy is a common adjuvant therapy after transurethral resection of bladder tumors. However, it has several disadvantages such as low drug penetration rate, short residence time, unsustainable action and inability to release slowly, thus new drug delivery and new modalities in delivery carriers need to be continuously explored. Nano-drug delivery system is a novel way in treatment for bladder cancer that can increase the absorption rate and prolong the duration of drug, as well as sustain the action by controlling drug release. Currently, nano-drug delivery carriers mainly included liposomes, polymers, and inorganic materials. In this paper, we reveal current researches in nano-drug delivery system in bladder cancer intravesical chemotherapy by describing the applications and defects of liposomes, polymers and inorganic material nanocarriers, and provide a basis for the improvement of intravesical chemotherapy drugs in bladder cancer.

Aldehyde-functional thermoresponsive diblock copolymer worm gels exhibit strong mucoadhesion

A series of thermoresponsive diblock copolymer worm gels is prepared via reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate using a water-soluble methacrylic precursor bearing pendent cis-diol groups. Selective oxidation using an aqueous solution of sodium periodate affords the corresponding aldehyde-functional worm gels. The aldehyde groups are located within the steric stabilizer chains and the aldehyde content can be adjusted by varying the periodate/cis-diol molar ratio. These aldehyde-functional worm gels are evaluated in terms of their mucoadhesion performance with the aid of a fluorescence microscopy-based assay. Using porcine urinary bladder mucosa as a model substrate, we demonstrate that these worm gels offer a comparable degree of mucoadhesion to that afforded by chitosan, which is widely regarded to be a ‘gold standard’ positive control in this context. The optimum degree of aldehyde functionality is approximately 30%: lower degrees of functionalization lead to weaker mucoadhesion, whereas higher values compromise the desirable thermoresponsive behavior of these worm gels.

Optimizing the aldehyde content of thermoresponsive diblock copolymer worm gels via periodate oxidation leads to mucoadhesion performance comparable to that of chitosan (a gold standard positive control) in a fluorescence assay using porcine mucosa.

Untangling Mucosal Drug Delivery: Engineering, Designing, and Testing Nanoparticles to Overcome the Mucus Barrier

Mucus is a complex viscoelastic gel and acts as a barrier covering much of the soft tissue in the human body. High vascularization and accessibility have motivated drug delivery to various mucosal surfaces; however, these benefits are hindered by the mucus layer. To overcome the mucus barrier, many nanomedicines have been developed, with the goal of improving the efficacy and bioavailability of drug payloads. Two major nanoparticle-based strategies have emerged to facilitate mucosal drug delivery, namely, mucoadhesion and mucopenetration. Generally, mucoadhesive nanoparticles promote interactions with mucus for immobilization and sustained drug release, whereas mucopenetrating nanoparticles diffuse through the mucus and enhance drug uptake. The choice of strategy depends on many factors pertaining to the structural and compositional characteristics of the target mucus and mucosa. While there have been promising results in preclinical studies, mucus-nanoparticle interactions remain poorly understood, thus limiting effective clinical translation. This article reviews nanomedicines designed with mucoadhesive or mucopenetrating properties for mucosal delivery, explores the influence of site-dependent physiological variation among mucosal surfaces on efficacy, transport, and bioavailability, and discusses the techniques and models used to investigate mucus-nanoparticle interactions. The effects of non-homeostatic perturbations on protein corona formation, mucus composition, and nanoparticle performance are discussed in the context of mucosal delivery. The complexity of the mucosal barrier necessitates consideration of the interplay between nanoparticle design, tissue-specific differences in mucus structure and composition, and homeostatic or disease-related changes to the mucus barrier to develop effective nanomedicines for mucosal delivery.

Current trends in chitosan based nanopharmaceuticals for topical vaginal therapies

Large surface area, rich vascularisation, well defined mucous membrane, balanced pH and relatively low enzymatic activity makes vagina a suitable site for drugs associated with women's health issues like Urinary tract infection (UTI) and vaginal infections. Therapeutic performance of intravaginal dosage forms largely depends on the properties of polymers and drugs. Chitosan (CS) because of its unique physical, chemical, pharmaceutical and biopharmaceutical properties have received a great deal of attention as an essential component in vaginal drug delivery systems. Further the presence of free amino and hydroxyl groups on the chitosan skeleton allows easy derivatization under mild conditions to meet specific application requirements. Moreover, CS-based nanopharmaceuticals like nanoparticles, nanofiber, nanogel, nanofilm, liposomes and micelles are widely studied to improve therapeutic performance of vaginal formulations. However, susceptibility of CS to the acidic pH of vagina, poor loading of hydrophobic drugs, rapid mucosal turn over are the key issues need to be addressed for successful outcomes. In this review, we have discussed the application of CS and CS derivatives in vaginal drug delivery and also highlight the recent progress in chitosan based nanocarrier platforms in terms of their limitations and potentials.

Chitosan oleate-tripolyphosphate complex-coated calcium alginate bead: Physicochemical aspects of concurrent core-coat formation

This study designed chitosan species-coated calcium alginate beads through concurrent core-coat formation. Chitosan oleate was synthesized by carbodiimide chemistry and characterized by ¹H NMR and FTIR techniques. Chitosan or chitosan oleate was coated onto the forming alginate or alginate/tripolyphosphate core using vibratory nozzle extrusion-microencapsulation approach, followed by calcium crosslinking. Chlorpheniramine maleate served as a model water-soluble drug. The molecular characteristics, size, shape, morphology, swelling, erosion, water uptake, drug content and drug release profiles of beads were evaluated. Discrete spherical coated beads were obtained through minimizing successive bead adhesion through an interplay of nozzle vibrational frequency and polymeric solution flow rate. The tripolyphosphate ions in the core possessed higher diffusional kinetics than alginate and were better able to attract chitosan species onto bead surfaces to facilitate alginate-chitosan coacervation. Amphiphilic chitosan oleate formed smaller aggregates than chitosan. It interacted with greater ease with core alginate and tripolyphosphate. The gain in alginate/tripolyphosphate interaction with chitosan oleate at the core-coat interface enhanced bead robustness against swelling and water uptake with drug release consequently dependent on the loss of alginate-drug interaction.

A review: Gelatine as a bioadhesive material for medical and pharmaceutical applications

Bioadhesive polymers offer versatility to medical and pharmaceutical inventions. The incorporation of such materials to conventional dosage forms or medical devices may confer or improve the adhesivity of the bioadhesive systems, subsequently prolonging their residence time at the site of absorption or action and providing sustained release of actives with improved bioavailability and therapeutic outcomes. For decades, much focus has been put on scientific works to replace synthetic polymers with biopolymers with desirable functional properties. Gelatine has been considered one of the most promising biopolymers. Despite its biodegradability, biocompatibility and unique biological properties, gelatine exhibits poor mechanical and adhesive properties, limiting its end-use applications. The chemical modification and blending of gelatine with other biomaterials are strategies proposed to improve its bioadhesivity. Here we discuss the classical approaches involving a variety of polymer blends and composite systems containing gelatine, and gelatine modifications via thiolation, methacrylation, catechol conjugation, amination and other newly devised strategies. We highlight several of the latest studies on these strategies and their relevant findings.

Optimization of a floating poloxamer 407-based hydrogel using the Box-Behnken design: in vitro characterization and in vivo buoyancy evaluation for intravesical instillation

Intravesical instillation of a poloxamer 407 (PLX)-based hydrogel offers advantages such as thermo-sensitivity and sol-to-gel transition, but its utility is limited by urinary obstruction and insufficient bladder residence time. To overcome these obstacles, a floating PLX-hydrogel (FPH) was developed using sodium bicarbonate (BC) as a floating agent and hyaluronic acid (HA) as a gel strength modulator. The FPH composition was optimized using the Box-Behnken design with three independent variables: X₁ [PLX concentration, 23.91%], X₂ [BC concentration, 5.15%], and X₃ [HA concentration, 3.49%]. The quadratic model was the best fit (desirability function, 0.623), resulting in response parameters of Y₁ [floating time, 53.7 s], Y₂ [gelation temperature gap, 20.3°C], and Y₃ [duration time of gel, 396.7 min]. Rheological observations revealed the mechanical rigidity (storage modulus > loss modulus at elevated temperature) of the optimized FPH (phase transition temperature, 15.08°C). Gel erosion and drug release studies were performed using the gravimetric method; the remaining FPH fraction decreased exponentially with time, and gemcitabine release was biphasic and surface erosion-controlled. In vivo buoyancy was evaluated in rats using ultrasonography; these results were similar to those of the in vitro floating behavior. Thus, optimized FPH for intravesical instillation is a prospective option for bladder cancer treatment.

Feasibility of chitosan-based nanoparticles approach for intranasal immunisation of live attenuated Japanese encephalitis vaccine

Intranasal (IN) administration, a non-invasive route, is explored to overcome the limitations of conventional subcutaneous (SC) injection for Japanese encephalitis (JE) immunisation. Mucoadhesive nanoparticles (NPs) are recognised for the benefits they offer via IN delivery, such as extended retention time of the vaccine on the mucosa. The purpose of this study was to evaluate immunisation effect of live attenuated Japanese encephalitis-chimeric virus vaccine (JE-CV)-loaded mucoadhesive NPs based on chitosan (CS) or chitosan maleimide (CM), a novel mucoadhesive polymer, via the IN route to improve the mucosal immunisation against JE. The results revealed that IN immunisation stimulated seroprotection following PRNT₅₀ evaluation. Moreover, compared with SC immunisation, IN immunisation in mice provided a higher sIgA level, leading to improved mucosal immune response. In addition, chitosan-based NPs showed an adjuvant effect on the IN vaccine due to their mucoadhesive and antigen-uptaken properties. CM NPs successfully induced sIgA. In contrast, SC JE-CV immunisation induced negligible mucosal immunity. These immunological advantages revealed that JE-CV-loaded mucoadhesive NPs are a promising approach for IN vaccination as an alternative route for JE protection due to the stimulatory effects on both mucosal and systemic immune responses.

Optimization of artificial urine formula for in vitro cellular study compared with native urine

Several artificial urine (AU) formulas have been developed to mimic the normal urine. Most of them are protein-free, particularly when secreted proteins (secretome) is to be analyzed. However, the normal urine actually contains a tiny amount of proteins. We hypothesized that urinary proteins at physiologic level play a role in preservation of renal cell biology and function. This study evaluated the effects from supplementation of 0-10% fetal bovine serum (FBS) into the well-established AU-Siriraj protocol on MDCK renal tubular cells. Time to deformation (T_D) was reduced by both native urine and AU-Siriraj without/with FBS compared with complete culture medium (control). Among the native urine and AU-Siriraj without/with FBS, the cells in AU-Siriraj+2.5% FBS had the longest T_D. Supplementation of FBS increased cell death in a dose-dependent manner (but still <10%). Transepithelial electrical resistance (TER) of the polarized cells in the native urine was comparable to the control, whereas that of the cells in AU-Siriraj+2.5% FBS had the highest TER. These data indicate that supplementation of 2.5% FBS into AU-Siriraj can prolong time to deformation and enhance polarization of renal tubular cells. Therefore, AU-Siriraj+2.5% FBS is highly recommended for in vitro study of cell biology and function (when secretome is not subjected to analysis).

Fabrication of chitosan-polyethylene glycol nanocomposite films containing ZIF-8 nanoparticles for application as wound dressing materials

Biocompatible nanocomposite films based on chitosan (CS) and polyethylene glycol (PEG) polymers containing cephalexin (CFX) antibiotic drug and zeolitic imidazolate framework-8 (ZIF-8) nanoparticles (NPs) were designed and fabricated to develop wound dressing materials capable of controlled drug release. Swelling experiment was performed in three acidic, neutral, and alkaline solutions. The tensile strength test reflected that upon increasing the NPs loading within the films, the tensile strength was enhanced but the elongation at break was diminished. The release of the CFX was intensively increased within approximately 3, 8, and 10 h (burst release) in acidic, neutral, and alkaline media, respectively while after that the CFX was smoothly released over time (sustained release). The antibacterial activities of all films were examined against Gram-positive (S. aureus, B. cereus) and Gram-negative (E. coli, P. aeruginosa, and Acinetobacter) bacteria frequently found in the infected wounds. Moreover, the MTT assay revealed that all films had high cell viabilities towards the L929 fibroblast cells confirming these nanocomposites could be used as favorable wound dressing materials. Finally, the film containing 4% ZIF-8 NPs (film 5) was chosen as the best sample due to it revealed appropriate mechanical properties, swelling, drug release and cell viability among all samples examined.

Recent Advancements in Using Polymers for Intestinal Mucoadhesion and Mucopenetration

Oral administration of actives is the most desired form of delivery, but the formulations need to overcome a variety of barriers including the intestinal mucus. This feature article summarizes the developments from the past 2-3 years in this context focusing on polymer-based formulations. The progress in assembling mucopenetrating nanoparticles is outlined considering coatings using noninteracting polymers as well as virus-like particles and charge-shifting particles. Next, polymers and their modification to enhance mucoadhesion are discussed, followed by providing examples of double-encapsulation systems that aim to combine mucopenetration with mucoadhesion in the same formulation. Finally, a short outlook is provided highlighting a few of the most pressing challenges to address.