Comparison of Strategies in Development and Manufacturing of Low Viscosity, Ultra-High Concentration Formulation for IgG1 Antibody

Stability of Protein Pharmaceuticals: Recent Advances

There have been significant advances in the formulation and stabilization of proteins in the liquid state over the past years since our previous review. Our mechanistic understanding of protein-excipient interactions has increased, allowing one to develop formulations in a more rational fashion. The field has moved towards more complex and challenging formulations, such as high concentration formulations to allow for subcutaneous administration and co-formulation. While much of the published work has focused on mAbs, the principles appear to apply to any therapeutic protein, although mAbs clearly have some distinctive features. In this review, we first discuss chemical degradation reactions. This is followed by a section on physical instability issues. Then, more specific topics are addressed: instability induced by interactions with interfaces, predictive methods for physical stability and interplay between chemical and physical instability. The final parts are devoted to discussions how all the above impacts (co-)formulation strategies, in particular for high protein concentration solutions.'

Poly(glutamic acid)-Based Viscosity Reducers for Concentrated Formulations of a Monoclonal IgG Antibody

Above a concentration threshold, the viscosity of solutions of proteins increases abruptly, which hampers the injectability of therapeutic formulations. Concentrations above 200 g/L are an ideal goal for subcutaneous application of antibodies. Molecular additives, such as amino acids (e.g., arginine) help decrease the viscosity, but they are used at concentrations as high as about 200 mmol/L. We addressed the question of whether poly(amino acids) could be more efficient than small molecular additives. We observed marked fluidification of a model therapeutic monoclonal antibody (mAb) solution by poly(d,l-glutamic acid) and poly(l-glutamic acid) derivatives added at concentrations of <6.5 g/L (i.e., a mAb/polymer chain molar ratio between 4:1 and 1:1 mol/mol). The bare poly(glutamate) parent chains were compared with polyethylene glycol-grafted chains as PEGylation is a common way to enhance stability. Viscosity could be decreased to ∼20 mPa s as compared to values of ∼100 mPa s in the absence of polymers at 200 g/L mAb. Formation of complexes between the mAb and the polyglutamates was characterized by capillary electrophoresis analysis in dilute solutions (1 g/L mAb) and by observation of phase separation at higher concentrations, suggesting tight association at about 2:1 mol/mol mAb/polymer. Altogether, these results show that polyglutamate derivatives hold an untapped potential as an excipient for fluidification of concentrated protein solutions.

The Osmolality and Hemolysis of High-Concentration Monoclonal Antibody Formulations

PURPOSES

Highly concentrated monoclonal antibody (mAb) formulations for subcutaneous administration are becoming increasingly preferred within the biopharmaceutical industry for ease of use and improved patient compliance. A common phenomenon observed in the industry is that osmolality detected via freezing-point depression (FPD) in high-concentration mAb formulations is much higher than the theoretical concentrations, yet the occurrence of this phenomenon and its possible safety issues have been rarely reported.

METHODS

The current study summarized theoretical osmolality of U.S. Food and Drug Administration approved high-concentration mAb formulations and evaluated effects of high osmolality on safety using hemolysis experiments for the first time. Two mAbs formulated at 150 mg/mL were used as models and configured into two isotonic solutions: a, a theoretically calculated molarity in the isotonic range (H) and b, an osmolality value measured via the FPD in the isotonic range (I). The H and I formulations of each mAb were individually subjected to hemolysis experiments, and the hemolysis rates of the two formulations of the same mAb were compared. Besides, the effect of mAb concentration on osmolality detected by FPD was explored as well.

RESULTS

The results indicated that the hemolysis rates were similar between the H and I formulations of mAbs at the same sample addition volume, and the osmolality values increased approximately linearly with the increase in mAb concentration.

CONCLUSIONS

High osmolality for high-concentration mAb formulations would not affect product safety and the excipients could be added at relatively high levels to maintain product stability, especially for labile products.

Variable domain mutational analysis to probe the molecular mechanisms of high viscosity of an IgG1 antibody

Subcutaneous injection is the preferred route of administration for many antibody therapeutics for reasons that include its speed and convenience. However, the small volume limit (typically ≤ 2 mL) for subcutaneous delivery often necessitates antibody formulations at high concentrations (commonly ≥100 mg/mL), which may lead to physicochemical problems. For example, antibodies with large hydrophobic or charged patches can be prone to self-interaction giving rise to high viscosity. Here, we combined X-ray crystallography with computational modeling to predict regions of an anti-glucagon receptor (GCGR) IgG1 antibody prone to self-interaction. An extensive mutational analysis was undertaken of the complementarity-determining region residues residing in hydrophobic surface patches predicted by spatial aggregation propensity, in conjunction with residue-level solvent accessibility, averaged over conformational ensembles from molecular dynamics simulations. Dynamic light scattering (DLS) was used as a medium throughput screen for self-interaction of ~ 200 anti-GCGR IgG1 variants. A negative correlation was found between the viscosity determined at high concentration (180 mg/mL) and the DLS interaction parameter measured at low concentration (2-10 mg/mL). Additionally, anti-GCGR variants were readily identified with reduced viscosity and antigen-binding affinity within a few fold of the parent antibody, with no identified impact on overall developability. The methods described here may be useful in the optimization of other antibodies to facilitate their therapeutic administration at high concentration.

Application of Formulation Principles to Stability Issues Encountered During Processing, Manufacturing, and Storage of Drug Substance and Drug Product Protein Therapeutics

The field of formulation and stabilization of protein therapeutics has become rather extensive. However, most of the focus has been on stabilization of the final drug product. Yet, proteins experience stress and degradation through the manufacturing process, starting with fermentaition. This review describes how formulation principles can be applied to stabilize biopharmaceutical proteins during bioprocessing and manufacturing, considering each unit operation involved in prepration of the drug substance. In addition, the impact of the container on stabilty is discussed as well.

From cell factories to patients: Stability challenges in biopharmaceuticals manufacturing and administration with mitigation strategies

Active ingredients of biopharmaceuticals consist of a wide array of biomolecular structures, including those of enzymes, monoclonal antibodies, nucleic acids, and recombinant proteins. Recently, these molecules have dominated the pharmaceutical industry owing to their safety and efficacy. However, their manufacturing is hindered by high cost, inadequate batch-to-batch equivalence, inherent instability, and other quality issues. This article is an up-to-date review of the challenges encountered during different stages of biopharmaceutical production and mitigation of problems arising during their development, formulation, manufacturing, and administration. It is a broad overview discussion of stability issues encountered during product life cycle i.e., upstream processing (aggregation, solubility, host cell proteins, color change), downstream bioprocessing (aggregation, fragmentation), formulation, manufacturing, and delivery to patients.

Biophysical Determinants for the Viscosity of Concentrated Monoclonal Antibody Solutions

Monoclonal antibodies (mAbs) are particularly relevant for therapeutics due to their high specificity and versatility, and mAb-based drugs are hence used to treat numerous diseases. The increased patient compliance of self-administration motivates the formulation of products for subcutaneous (SC) administration. The associated challenge is to formulate highly concentrated antibody solutions to achieve a significant therapeutic effect, while limiting their viscosity and preserving their physicochemical stability. Protein-protein interactions (PPIs) are in fact the root cause of several potential problems concerning the stability, manufacturability, and delivery of a drug product. The understanding of macroscopic viscosity requires an in-depth knowledge on protein diffusion, PPIs, and self-association/aggregation. Here, we study the self-diffusion of different mAbs of the IgG1 subtype in aqueous solution as a function of the concentration and temperature by quasi-elastic neutron scattering (QENS). QENS allows us to probe the short-time self-diffusion of the molecules and therefore to determine the hydrodynamic mAb cluster size and to gain information on the internal mAb dynamics. Small-angle neutron scattering (SANS) is jointly employed to probe structural details and to understand the nature and intensity of PPIs. Complementary information is provided by molecular dynamics (MD) simulations and viscometry, thus obtaining a comprehensive picture of mAb diffusion.

Monoclonal antibody and protein therapeutic formulations for subcutaneous delivery: high-concentration, low-volume vs. low-concentration, high-volume

Biologic drugs are used to treat a variety of cancers and chronic diseases. While most of these treatments are administered intravenously by trained healthcare professionals, a noticeable trend has emerged favoring subcutaneous (SC) administration. SC administration of biologics poses several challenges. Biologic drugs often require higher doses for optimal efficacy, surpassing the low volume capacity of traditional SC delivery methods like autoinjectors. Consequently, high concentrations of active ingredients are needed, creating time-consuming formulation obstacles. Alternatives to traditional SC delivery systems are therefore needed to support higher-volume biologic formulations and to reduce development time and other risks associated with high-concentration biologic formulations. Here, we outline key considerations for SC biologic drug formulations and delivery and explore a paradigm shift: the flexibility afforded by low-to-moderate-concentration drugs in high-volume formulations as an alternative to the traditionally difficult approach of high-concentration, low-volume SC formulation delivery.

TRYBE®: an Fc-free antibody format with three monovalent targeting arms engineered for long in vivo half-life

TrYbe® is an Fc-free therapeutic antibody format, capable of engaging up to three targets simultaneously, with long in vivo half-life conferred by albumin binding. This format is shown by small-angle X-ray scattering to be conformationally flexible with favorable 'reach' properties. We demonstrate the format's broad functionality by co-targeting of soluble and cell surface antigens. The benefit of monovalent target binding is illustrated by the lack of formation of large immune complexes when co-targeting multivalent antigens. TrYbes® are manufactured using standard mammalian cell culture and protein A affinity capture processes. TrYbes® have been formulated at high concentrations and have favorable drug-like properties, including stability, solubility, and low viscosity. The unique functionality and inherent developability of the TrYbe® makes it a promising multi-specific antibody fragment format for antibody therapy.

US FDA-approved therapeutic antibodies with high-concentration formulation: summaries and perspectives

Thirty four (34) of the total US FDA approved 103 therapeutic antibody drugs, accounts for one third of the total approved mAbs, are formulated with high protein concentration (100 mg/mL or above) which are the focus of this article. The highest protein concentration of these approved mAbs is 200 mg/mL. The dominant administration route is subcutaneous (76%). Our analysis indicates that it may be rational to implement a platform formulation containing polysorbate, histidine and sucrose to accelerate high concentration formulation development for antibody drugs. Since 2015, the FDA approval numbers are significantly increased which account for 76% of the total approval numbers, i.e., 26 out of 34 highly concentrated antibodies. Thus, we believe that the high concentration formulations of antibody drugs will be the future trend of therapeutic antibody formulation development, regardless of the challenges of highly concentrated protein formulations.

Formative and Validation Human Factors studies of a new disposable autoinjector for subcutaneous delivery of chronic disease therapies

BACKGROUND

Use-related risks related to autoinjector devices have been previously identified. To minimize these problems, the identification of potential use errors is a critical task during device development.

METHODS

This article presents iterative human factor studies, which aim to assess user interaction with the tested push-on-skin BD Intevia™ 1 mL Disposable Autoinjector, across a wide range of indications, and a broad user population.

RESULTS

Through the different human factor studies, use errors were recorded when the participants completed the critical tasks, but their occurrence continuously decreased. First, the incidence of use errors was reduced when the participants read the IFU. In addition, the IFU updates and design change implemented contributed to improve the usability performance. During the validation study, some use errors were still observed, mainly during the first uses. Nevertheless, providing a training to the participants almost fully eliminated the remaining use errors.

CONCLUSION

Thus, these results demonstrated that this new autoinjector can be safely and efficiently used for its intended uses and under the expected use conditions by all tested user groups.