Advancing organelle genome transformation and editing for crop improvement

The complete chloroplast genome sequence of Lilium saccatum S. Yun Liang (Liliaceae, Lilieae) and its phylogenetic analysis

Lilium saccatum is a species of ornamental plant found in southeastern Xizang, China. In the present study, the complete chloroplast (cp) genome of L. saccatum was sequenced using next-generation sequencing (NGS). The de novo assembled cp genome was 151,839 bp in length, including a pair of inverted repeat regions (IRs; 26,421 bp), a small single-copy region (SSC; 17,528 bp), and a large single-copy region (LSC; 81,469 bp). The cp genome encodes 113 unique genes, including 79 protein-coding genes (PCGs), 30 tRNA genes, and four rRNA genes. The total GC content of the cp genome was 37.0%. Phylogenetic analysis of 24 cp genomes revealed that L. saccatum was closely related to L. souliei. This study could provide fundamental information for the phylogenomics and utilization of Lilium.

Drought stress enhances plastid-mediated RNA interference for efficient the willow leaf beetle management

Plastid-mediated RNA interference has emerged as a promising and effective approach for pest management. By expressing high levels of double-stranded RNAs (dsRNAs) in plastid that target essential pest genes, it has been demonstrated to effectively control certain herbivorous beetles and spider mites. However, as plants are sessile organisms, they frequently experience a combination of biotic and abiotic stresses. It remains unclear whether abiotic stress, such as drought stress, influences the accumulation of dsRNAs produced in plastids and its effectiveness in controlling pests. In this study, we aimed to investigate the effects of drought stress on dsACT expression in transplastomic poplar plants and its control efficiency against the willow leaf beetle (Plagiodera versicolora). Our findings revealed that drought stress did not significantly affect the dsRNA contents in transplastomic poplar plants, but it did lead to higher mortality of insect larvae. This increased mortality may be attributed to increased levels of jasmonic acid and cysteine proteinase inhibitor induced by water deficit. These results contribute to understanding of the mechanisms linking water deficit in plants to insect performance and provide valuable insights for implementing appropriate pest control strategies under drought stress conditions.

Chlomito: a novel tool for precise elimination of organelle genome contamination from nuclear genome assembly

Introduction

Accurate reference genomes are fundamental to understanding biological evolution, biodiversity, hereditary phenomena and diseases. However, many assembled nuclear chromosomes are often contaminated by organelle genomes, which will mislead bioinformatic analysis, and genomic and transcriptomic data interpretation.

Methods

To address this issue, we developed a tool named Chlomito, aiming at precise identification and elimination of organelle genome contamination from nuclear genome assembly. Compared to conventional approaches, Chlomito utilized new metrics, alignment length coverage ratio (ALCR) and sequencing depth ratio (SDR), thereby effectively distinguishing true organelle genome sequences from those transferred into nuclear genomes via horizontal gene transfer (HGT).

Results

The accuracy of Chlomito was tested using sequencing data from Plum, Mango and Arabidopsis. The results confirmed that Chlomito can accurately detect contigs originating from the organelle genomes, and the identified contigs covered most regions of the organelle reference genomes, demonstrating efficiency and precision of Chlomito. Considering user convenience, we further packaged this method into a Docker image, simplified the data processing workflow.

Discussion

Overall, Chlomito provides an efficient, accurate and convenient method for identifying and removing contigs derived from organelle genomes in genomic assembly data, contributing to the improvement of genome assembly quality.

Piece and parcel of gymnosperm organellar genomes

MAIN CONCLUSION

Significant past, present, and potential future research into the organellar (plastid and mitochondrial) genomes of gymnosperms that can provide insight into the unknown origin and evolution of plants is highlighted. Gymnosperms are vascular seed plants that predominated the ancient world before their sister clade, angiosperms, took over during the Late Cretaceous. The divergence of gymnosperms and angiosperms took place around 300 Mya, with the latter evolving into the diverse group of flowering plants that dominate the plant kingdom today. Although gymnosperms have reportedly made some evolutionary innovations, the literature on their genome advances, particularly their organellar (plastid and mitochondrial) genomes, is relatively scattered and fragmented. While organellar genomes can shed light on plant origin and evolution, they are frequently overlooked, due in part to their limited contribution to gene expression and lack of evolutionary dynamics when compared to nuclear genomes. A better understanding of gymnosperm organellar genomes is critical because they reveal genetic changes that have contributed to their unique adaptations and ecological success, potentially aiding in plant survival, enhancement, and biodiversity conservation in the face of climate change. This review reveals significant information and gaps in the existing knowledge base of organellar genomes in gymnosperms, as well as the challenges and research needed to unravel their complexity.

The complete chloroplast genome sequence of Rhododendron farrerae Tate ex Sweet (Ericaceae)

Rhododendron farrerae Tate ex Sweet 1831 is a species of ornamental plant found in southern China. In the present study, the complete chloroplast genome of R. farrerae was sequenced. The genome was 149,453 bp in length and lacked the typical quadripartite structure. The plastid genome contained 112 genes, including 74 protein-coding genes, 34 tRNA genes, and 4 rRNA genes. The overall GC content of the genome was 35.65%. Phylogenetic analysis of 25 chloroplast genomes revealed that R. farrerae was closely related to Rhododendron huadingense. This study could provide fundamental information for the distribution, utilization, and phylogenomics of Rhododendron.

The applications of CRISPR/Cas-mediated microRNA and lncRNA editing in plant biology: shaping the future of plant non-coding RNA research

MAIN CONCLUSION

CRISPR/Cas technology has greatly facilitated plant non-coding RNA (ncRNA) biology research, establishing itself as a promising tool for ncRNA functional characterization and ncRNA-mediated plant improvement. Throughout the last decade, the promising genome editing tool clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated proteins (Cas; CRISPR/Cas) has allowed unprecedented advances in the field of plant functional genomics and crop improvement. Even though CRISPR/Cas-mediated genome editing system has been widely used to elucidate the biological significance of a number of plant protein-coding genes, this technology has been barely applied in the functional analysis of those non-coding RNAs (ncRNAs) that modulate gene expression, such as microRNAs (miRNAs) and long non-coding RNAs (lncRNAs). Nevertheless, compelling findings indicate that CRISPR/Cas-based ncRNA editing has remarkable potential for deciphering the biological roles of ncRNAs in plants, as well as for plant breeding. For instance, it has been demonstrated that CRISPR/Cas tool could overcome the challenges associated with other approaches employed in functional genomic studies (e.g., incomplete knockdown and off-target activity). Thus, in this review article, we discuss the current status and progress of CRISPR/Cas-mediated ncRNA editing in plant science in order to provide novel prospects for further assessment and validation of the biological activities of plant ncRNAs and to enhance the development of ncRNA-centered protocols for crop improvement.

Crops under past diversification and ongoing climate change: more than just selection of nuclear genes for flowering

Diversification and breeding following domestication and under current climate change across the globe are the two most significant evolutionary events experienced by major crops. Diversification of crops from their wild ancestors has favored dramatic changes in the sensitivity of the plants to the environment, particularly significantly in transducing light inputs to the circadian clock, which has allowed the growth of major crops in the relatively short growing season experienced in the Northern Hemisphere. Historically, mutants and the mapping of quantitative trait loci (QTL) have facilitated the identification and the cloning of genes that underlie major changes of the clock and the regulation of flowering. Recent studies have suggested that the thermal plasticity of the circadian clock output, and not just the core genes that follow temperature compensation, has also been under selection during diversification and breeding. Wild alleles that accelerate output rhythmicity could be beneficial for crop resilience. Furthermore, wild alleles with beneficial and flowering-independent effects under stress indicate their possible role in maintaining a balanced source-sink relationship, thereby allowing productivity under climatic change. Because the chloroplast genome also regulates the plasticity of the clock output, mapping populations including cytonuclear interactions should be utilized within an integrated field and clock phenomics framework. In this review, we highlight the need to integrate physiological and developmental approaches (physio-devo) to gain a better understanding when re-domesticating wild gene alleles into modern cultivars to increase their robustness under abiotic heat and drought stresses.

Pangenome-based trajectories of intracellular gene transfers in Poaceae unveil high cumulation in Triticeae

Intracellular gene transfers (IGTs) between the nucleus and organelles, including plastids and mitochondria, constantly reshape the nuclear genome during evolution. Despite the substantial contribution of IGTs to genome variation, the dynamic trajectories of IGTs at the pangenomic level remain elusive. Here, we developed an approach, IGTminer, that maps the evolutionary trajectories of IGTs using collinearity and gene reannotation across multiple genome assemblies. We applied IGTminer to create a nuclear organellar gene (NOG) map across 67 genomes covering 15 Poaceae species, including important crops. The resulting NOGs were verified by experiments and sequencing data sets. Our analysis revealed that most NOGs were recently transferred and lineage specific and that Triticeae species tended to have more NOGs than other Poaceae species. Wheat (Triticum aestivum) had a higher retention rate of NOGs than maize (Zea mays) and rice (Oryza sativa), and the retained NOGs were likely involved in photosynthesis and translation pathways. Large numbers of NOG clusters were aggregated in hexaploid wheat during 2 rounds of polyploidization, contributing to the genetic diversity among modern wheat accessions. We implemented an interactive web server to facilitate the exploration of NOGs in Poaceae. In summary, this study provides resources and insights into the roles of IGTs in shaping interspecies and intraspecies genome variation and driving plant genome evolution.

Supplementing the Nuclear-Encoded PSII Subunit D1 Induces Dramatic Metabolic Reprogramming in Flag Leaves during Grain Filling in Rice

Our previous study has demonstrated that the nuclear-origin supplementation of the PSII core subunit D1 protein stimulates growth and increases grain yields in transgenic rice plants by enhancing photosynthetic efficiency. In this study, the underlying mechanisms have been explored regarding how the enhanced photosynthetic capacity affects metabolic activities in the transgenic plants of rice harboring the integrated transgene RbcSPTP-OspsbA cDNA, cloned from rice, under control of the AtHsfA2 promoter and N-terminal fused with the plastid-transit peptide sequence (PTP) cloned from the AtRbcS. Here, a comparative metabolomic analysis was performed using LC-MS in flag leaves of the transgenic rice plants during the grain-filling stage. Critically, the dramatic reduction in the quantities of nucleotides and certain free amino acids was detected, suggesting that the increased photosynthetic assimilation and grain yield in the transgenic plants correlates with the reduced contents of free nucleotides and the amino acids such as glutamine and glutamic acid, which are cellular nitrogen sources. These results suggest that enhanced photosynthesis needs consuming more free nucleotides and nitrogen sources to support the increase in biomass and yields, as exhibited in transgenic rice plants. Unexpectedly, dramatic changes were measured in the contents of flavonoids in the flag leaves, suggesting that a tight and coordinated relationship exists between increasing photosynthetic assimilation and flavonoid biosynthesis. Consistent with the enhanced photosynthetic efficiency, the substantial increase was measured in the content of starch, which is the primary product of the Calvin-Benson cycle, in the transgenic rice plants under field growth conditions.

Research Progress of Nucleic Acid Detection Technology for Genetically Modified Maize

Genetically modified (GM) maize is one of the earliest GM crops to have achieved large-scale commercial cultivation globally, and it is of great significance to excel in the development and implementation of safety policy regarding GM, and in its technical oversight. This article describes the general situation regarding genetically modified maize, including its varieties, applications, relevant laws and regulations, and so on. From a technical point of view, we summarize and critically analyze the existing methods for detecting nucleic acid levels in genetically modified maize. The nucleic acid extraction technology used for maize is explained, and the introduction of traditional detection techniques, which cover variable-temperature and isothermal amplification detection technology and gene chip technology, applications in maize are described. Moreover, new technologies are proposed, with special attention paid to nucleic acid detection methods using sensors. Finally, we review the current limitations and challenges of GM maize nucleic acid testing and share our vision for the future direction of this field.

Particle bombardment-assisted peptide-mediated gene transfer for highly efficient transient assay

OBJECTIVE

A centrifugation-assisted peptide-mediated gene transfer (CAPT) method was recently developed as an efficient system for gene delivery into plant cells. However, the gene transfer efficiency of CAPT into plant cells was not entirely satisfactory for detecting transient expression of a transgene driven into mitochondria. Here, we report a new gene delivery system using a method called particle bombardment-assisted peptide-mediated gene transfer (PBPT).

RESULTS

We investigated various parameters of the PBPT method to increase transient gene expression efficiency in Brassica campestris. The optimal conditions for PBPT were a single bombardment with gold particles coated with a DNA‒peptide complex (6 µg of DNA and 2 µg of peptide) at an acceleration pressure of 5 kg/cm² and a target distance of 12.5 cm. Moreover, bombardment under the optimal conditions successfully transferred the transgene into the cells of other plant species, namely B. juncea and tomato. Thus, we developed a PBPT method for highly efficient delivery of a DNA‒peptide complex into plant mitochondria.

The complete chloroplast genome sequence of Bambusa tuldoides f. swolleninternode (Poaceae: Bambuseae)

Bambusa tuldoides f. swolleninternode is an attractive ornamental bamboo species of southern China, with highly shortened and swollen at the base of internodes. In this study, the complete chloroplast genome of B. tuldoides was sequenced and reported for the first time. The complete genome size is 139,460 base pairs (bp), including a large single-copy (LSC) region of 82,996 bp, a small single-copy (SSC) region of 12,876 bp and a pair of invert repeats (IR) regions of 21,794 bp. The plastid genome contained 132 genes, including 86 protein-coding genes, 38 tRNA genes and 8 rRNA genes. The overall GC content of the genome is 39%. The phylogenetic analysis revealed that B. tuldoides is closely related to B. dolichoclada, B. pachinensis var. hirsutissima, and B. utilis, three species in Bambusa based on 16 chloroplast genomes.

Biolistic Transformation of Chlamydomonas reinhardtii and Saccharomyces cerevisiae Mitochondria

Chlamydomonas reinhardtii and Saccharomyces cerevisiae are currently the two micro-organisms in which genetic transformation of mitochondria is routinely performed. The generation of a large variety of defined alterations as well as the insertion of ectopic genes in the mitochondrial genome (mtDNA) are possible, especially in yeast. Biolistic transformation of mitochondria is achieved through the bombardment of microprojectiles coated with DNA, which can be incorporated into mtDNA thanks to the highly efficient homologous recombination machinery present in S. cerevisiae and C. reinhardtii organelles. Despite a low frequency of transformation, the isolation of transformants in yeast is relatively quick and easy, since several natural or artificial selectable markers are available, while the selection in C. reinhardtii remains long and awaits new markers. Here, we describe the materials and techniques used to perform biolistic transformation, in order to mutagenize endogenous mitochondrial genes or insert novel markers into mtDNA. Although alternative strategies to edit mtDNA are being set up, so far, insertion of ectopic genes relies on the biolistic transformation techniques.

Poaceae Chloroplast Genome Sequencing: Great Leap Forward in Recent Ten Years

The first complete chloroplast genome of rice (Oryza sativa) was published in 1989, ushering in a new era of studies of chloroplast genomics in Poaceae. Progresses in Next-Generation Sequencing (NGS) and Third-Generation Sequencing (TGS) technologiesand in the development of genome assembly software, have significantly advanced chloroplast genomics research. Poaceae is one of the most targeted families in chloroplast genome research because of its agricultural, ecological, and economic importance. Over the last 30 years, 2,050 complete chloroplast genome sequences from 40 tribes and 282 genera have been generated, most (97%) of them in the recent ten years. The wealth of data provides the groundwork for studies on species evolution, phylogeny, genetic transformation, and other aspects of Poaceae chloroplast genomes. As a result, we have gained a deeper understanding of the properties of Poaceae chloroplast genomes. Here, we summarize the achievements of the studies of the Poaceae chloroplast genomes and envision the challenges for moving the area ahead.

CRISPR-Cas: A robust technology for enhancing consumer-preferred commercial traits in crops

The acceptance of new crop varieties by consumers is contingent on the presence of consumer-preferred traits, which include sensory attributes, nutritional value, industrial products and bioactive compounds production. Recent developments in genome editing technologies provide novel insight to identify gene functions and improve the various qualitative and quantitative traits of commercial importance in plants. Various conventional as well as advanced gene-mutagenesis techniques such as physical and chemical mutagenesis, CRISPR-Cas9, Cas12 and base editors are used for the trait improvement in crops. To meet consumer demand, breakthrough biotechnologies, especially CRISPR-Cas have received a fair share of scientific and industrial interest, particularly in plant genome editing. CRISPR-Cas is a versatile tool that can be used to knock out, replace and knock-in the desired gene fragments at targeted locations in the genome, resulting in heritable mutations of interest. This review highlights the existing literature and recent developments in CRISPR-Cas technologies (base editing, prime editing, multiplex gene editing, epigenome editing, gene delivery methods) for reliable and precise gene editing in plants. This review also discusses the potential of gene editing exhibited in crops for the improvement of consumer-demanded traits such as higher nutritional value, colour, texture, aroma/flavour, and production of industrial products such as biofuel, fibre, rubber and pharmaceuticals. In addition, the bottlenecks and challenges associated with gene editing system, such as off targeting, ploidy level and the ability to edit organelle genome have also been discussed.

Chemical synthesis of left arm of Chlamydomonas reinhardtii mitochondrial genome and in vivo functional analysis

Chlamydomonas reinhardtii is a photosynthetic eukaryote showing great industrial potential. The synthesis and in vivo function of the artificial C. reinhardtii genome not only promotes the development of synthetic biology technology but also supports industries that utilize this algae. Mitochondrial genome (MtG) is the smallest and simplest genome of C. reinhardtii that suits synthetic exploration. In this article, we designed and assembled a synthetic mitochondria left arm (syn-LA) genome sharing >92% similarity to the original mitochondria genome (OMtG) left arm, transferred it into the respiratory defect strain cc-2654, screened syn-LA containing transformants from recovered dark-growth defects using PCR amplification, verified internal function of syn-LA via western blot, detected heteroplasmic ratio of syn-LA, tried promoting syn-LA into homoplasmic status with paromomycin stress, and discussed the main limitations and potential solutions for this area of research. This research supports the functionalization of a synthetic mitochondrial genome in living cells. Although further research is needed, this article nevertheless provides valuable guidance for the synthesis of eukaryotic organelle genomes and opens possible directions for future research.

A simple technology for plastid transformation with fragmented DNA

Plastid engineering has several unique advantages such as high expression of transgenes due to high polyploidy of plastid genomes and environmental biosafety because of maternal inheritance of transgenes, and has become a promising tool for molecular farming, metabolic engineering, and genetic improvement. However, there are no standard vectors available for plastid transformation. Moreover, the construction of plastid transformation vectors containing long operons or genes encoding proteins that are toxic to Escherichia coli was tedious or difficult. Here, we developed a simple plastid transformation technology without the need for in vitro vector construction by using multiple linear DNA fragments which share homologous sequences (HSs) at their ends. The strategy is based on homologous recombination between HSs of DNA fragments via endogenous recombination machinery in plastids, which subsequently are integrated into the plastid genome. We found that HSs of 200 bp or longer were sufficient for mediating the integration into the plastid genome with at least similar efficiency to that of plasmid DNA-based plastid transformation. Furthermore, we successfully used this method to introduce a phage lysin-encoding gene and a long operon into a tobacco plastid genome. The establishment of this technology simplifies the plastid transformation procedure and provides a novel solution for expressing proteins, which are either toxic to the cloning host or large operons in plastids, without need of vector cloning.

Using synthetic biology to improve photosynthesis for sustainable food production

Photosynthesis is responsible for the primary productivity and maintenance of life on Earth, boosting biological activity and contributing to the maintenance of the environment. In the past, traditional crop improvement was considered sufficient to meet food demands, but the growing demand for food coupled with climate change has modified this scenario over the past decades. However, advances in this area have not focused on photosynthesis per se but rather on fixed carbon partitioning. In short, other approaches must be used to meet an increasing agricultural demand. Thus, several paths may be followed, from modifications in leaf shape and canopy architecture, improving metabolic pathways related to CO₂ fixation, the inclusion of metabolic mechanisms from other species, and improvements in energy uptake by plants. Given the recognized importance of photosynthesis, as the basis of the primary productivity on Earth, we here present an overview of the latest advances in attempts to improve plant photosynthetic performance. We focused on points considered key to the enhancement of photosynthesis, including leaf shape development, RuBisCO reengineering, Calvin-Benson cycle optimization, light use efficiency, the introduction of the C₄ cycle in C₃ plants and the inclusion of other CO₂ concentrating mechanisms (CCMs). We further provide compelling evidence that there is still room for further improvements. Finally, we conclude this review by presenting future perspectives and possible new directions on this subject.

Advances in plastid transformation for metabolic engineering in higher plants

The plastid (chloroplast) genome of higher plants is an appealing target for metabolic engineering via genetic transformation. Although the bacterial-type plastid genome is small compared with the nuclear genome, it can accommodate large quantities of foreign genes that precisely integrate through homologous recombination. Engineering complex metabolic pathways in plants often requires simultaneous and concerted expression of multiple transgenes, the possibility of stacking several transgenes in synthetic operons makes the transplastomic approach amazing. The potential for extraordinarily high-level transgene expression, absence of epigenetic gene silencing and transgene containment due to the exclusion of plastids from pollen transmission in most angiosperm species further add to the attractiveness of plastid transformation technology. This minireview describes recent advances in expanding the toolboxes for plastid genome engineering, and highlights selected high-value metabolites produced using transplastomic plants, including artemisinin, astaxanthin and paclitaxel.

Engineering the plastid and mitochondrial genomes of flowering plants

Engineering the plastid genome based on homologous recombination is well developed in a few model species. Homologous recombination is also the rule in mitochondria, but transformation of the mitochondrial genome has not been realized in the absence of selective markers. The application of transcription activator-like (TAL) effector-based tools brought about a dramatic change because they can be deployed from nuclear genes and targeted to plastids or mitochondria by an N-terminal targeting sequence. Recognition of the target site in the organellar genomes is ensured by the modular assembly of TALE repeats. In this paper, I review the applications of TAL effector nucleases and TAL effector cytidine deaminases for gene deletion, base editing and mutagenesis in plastids and mitochondria. I also review emerging technologies such as post-transcriptional RNA modification to regulate gene expression, Agrobacterium- and nanoparticle-mediated organellar genome transformation, and self-replicating organellar vectors as production platforms.

Modification of Chloroplast Antioxidant Capacity by Plastid Transformation

As immobile organisms, green plants must be frequently challenged by a broad range of environmental stresses. During these constantly adverse conditions, reactive oxygen species (ROS) levels can rise extremely in plants, leading to cellular dysfunction and cell death presumably due to irreversible protein overoxidation. Once considered merely as deleterious molecules, cells seek to remove them as efficiently as possible. To enhance ROS scavenging capacity, genes encoding antioxidative enzymes can be directly expressed from the genome of plastid (chloroplast), a major compartment for ROS production in photosynthetic organisms. Thus, overexpression of antioxidant enzymes by plastid engineering may provide an alternative to enhance plant's tolerance to stressful conditions specifically related with chloroplast-derived ROS. Here, we describe basic procedures for expressing glutathione reductase, a vital component of ascorbate-glutathione pathway, in tobacco via plastid transformation technology.

Spatial Features and Functional Implications of Plant 3D Genome Organization

The advent of high-throughput sequencing-based methods for chromatin conformation, accessibility, and immunoprecipitation assays has been a turning point in 3D genomics. Altogether, these new tools have been pushing upward the interpretation of pioneer cytogenetic evidence for a higher order in chromatin packing. Here, we review the latest development in our understanding of plant spatial genome structures and different levels of organization and discuss their functional implications. Then, we spotlight the complexity of organellar (i.e., mitochondria and plastids) genomes and discuss their 3D packing into nucleoids. Finally, we propose unaddressed research axes to investigate functional links between chromatin-like dynamics and transcriptional regulation within organellar nucleoids.

Evaluation of protein production in rice seedlings under dark conditions

Although plants have several advantages for foreign protein production, cultivation of transgenic plants in artificial plant growth facilities involves the use of a great amount of electricity for lightning and air conditioning, reducing cost-effectiveness. Protein production in plants grown in darkness can overcome this problem, but the amount of protein produced in the dark is unknown. In this study, the total amount of soluble protein produced in rice seedlings germinated and grown in light or darkness were examined at several time points after germination and under different temperature, nutritional, and seedling density conditions. Our results indicate that rice seedlings grown in darkness produce a comparable amount of total soluble protein to those grown in light. Furthermore, we found that the best conditions for protein production in dark-grown rice seedlings are large seeds germinated and grown for 10-12 days at 28 °C supplemented with Murashige and Skoog medium and 30 g/l sucrose in dense planting. Therefore, our results suggest that foreign proteins can be produced in rice seedlings in the dark, with a reduced electricity use and an increase in cost-effectiveness.

Multiple sgRNAs for one-step inactivation of the duplicated acetyl-coenzyme A carboxylase 2 (ACC2) genes in Brassica napus

Efficient plastid transformation in Arabidopsis (Arabidopsis thaliana) requires genetic lines that are hypersensitive to spectinomycin due to the absence of a chloroplast acetyl-coenzyme A carboxylase (ACCase) encoded in the acetyl-coenzyme A carboxylase 2 (ACC2) nuclear gene. To obtain plastid transformation-competent oilseed rape (Brassica napus), we inactivated all nuclear encoded, chloroplast targeted ACCase copies using CRISPR-Cas9. Brassica napus (2n = 38, AACC) is a recent interspecific hybrid of Brassica rapa (2n = 20, AA) and B. oleracea (2n = 18, CC) and is expected to have at least two ACC2 copies, one from each parent. The sequenced genome has two ACC2 copies, one that is B. rapa-like and one that is B. oleracea-like. We designed single-guide RNAs (sgRNAs) that could simultaneously inactivate both nuclear ACC2 copies. We expressed Cas9 from a chimeric egg cell promoter 1.2 (EC1.2p) known to yield homozygous or biallelic mutants in Arabidopsis in the T1 generation. To maximize the probability of functionally inactivating both orthologs in a single step, each of the two vectors carried four sgRNAs. Four T0 transgenic lines were obtained by Agrobacterium tumefaciens-mediated hypocotyl transformation. Amplicon sequencing confirmed mutations in ACC2 genes in 10 T1 progeny, in seven of which no wild-type (WT) copy remained. The B. napus T2 seedlings lacking WT ACC2 gene copies exhibited a spectinomycin hypersensitive phenotype, suggesting that they will be a useful resource for chloroplast genome transformation.

Improvement of base editors and prime editors advances precision genome engineering in plants

Clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR associated protein (Cas)-mediated gene disruption has revolutionized biomedical research as well as plant and animal breeding. However, most disease-causing mutations and agronomically important genetic variations are single base polymorphisms (single-nucleotide polymorphisms) that require precision genome editing tools for correction of the sequences. Although homology-directed repair of double-stranded breaks (DSBs) can introduce precise changes, such repairs are inefficient in differentiated animal and plant cells. Base editing and prime editing are two recently developed genome engineering approaches that can efficiently introduce precise edits into target sites without requirement of DSB formation or donor DNA templates. They have been applied in several plant species with promising results. Here, we review the extensive literature on improving the efficiency, target scope, and specificity of base editors and prime editors in plants. We also highlight recent progress on base editing in plant organellar genomes and discuss how these precision genome editing tools are advancing basic plant research and crop breeding.

The Development of Mitochondrial Gene Editing Tools and Their Possible Roles in Crop Improvement for Future Agriculture

We are living in the era of genome editing. Nowadays, targeted editing of the plant nuclear DNA is prevalent in basic biological research and crop improvement since its first establishment a decade ago. However, achieving the same accomplishment for the plant mitochondrial genome has long been deemed impossible. Recently, the pioneer studies on editing plant mitogenome have been done using the mitochondria-targeted transcription activator-like effector nucleases (mitoTALENs) in rice, rapeseed, and Arabidopsis. It is well documented that mitochondria play essential roles in plant development and stress tolerance, particularly, in cytoplasmic male sterility widely used in production of hybrids. The success of mitochondrial genome editing enables studying the fundamentals of mitochondrial genome. Furthermore, mitochondrial RNA editing (mostly by nuclear-encoded pentatricopeptide repeat (PPR) proteins) in a sequence-specific manner can simultaneously change the production of translatable mitochondrial mRNA. Moreover, direct editing of the nuclear-encoding mitochondria-targeted factors required for plant mitochondrial genome dynamics and recombination may facilitate genetic manipulation of plant mitochondria. Here, the present state of knowledge on editing the plant mitochondrial genome is reviewed.

Improving Protein Quantity and Quality—The Next Level of Plant Molecular Farming

Plants offer several unique advantages in the production of recombinant pharmaceuticals for humans and animals. Although numerous recombinant proteins have been expressed in plants, only a small fraction have been successfully put into use. The hugely distinct expression systems between plant and animal cells frequently cause insufficient yield of the recombinant proteins with poor or undesired activity. To overcome the issues that greatly constrain the development of plant-produced pharmaceuticals, great efforts have been made to improve expression systems and develop alternative strategies to increase both the quantity and quality of the recombinant proteins. Recent technological revolutions, such as targeted genome editing, deconstructed vectors, virus-like particles, and humanized glycosylation, have led to great advances in plant molecular farming to meet the industrial manufacturing and clinical application standards. In this review, we discuss the technological advances made in various plant expression platforms, with special focus on the upstream designs and milestone achievements in improving the yield and glycosylation of the plant-produced pharmaceutical proteins.

Bottom-Up Forces in Agroecosystems and Their Potential Impact on Arthropod Pest Management

Bottom-up effects are major ecological forces in crop-arthropod pest-natural enemy multitrophic interactions. Over the past two decades, bottom-up effects have been considered key levers for optimizing integrated pest management (IPM). Irrigation, fertilization, crop resistance, habitat manipulation, organic management practices, and landscape characteristics have all been shown to trigger marked bottom-up effects and thus impact pest management. In this review, we summarize current knowledge on the role of bottom-up effects in pest management and the associated mechanisms, and discuss several key study cases showing how bottom-up effects practically promote natural pest control. Bottom-up effects on IPM also contribute to sustainable intensification of agriculture in the context of agricultural transition and climate change. Finally, we highlight new research priorities in this important area. Together with top-down forces (biological control), future advances in understanding ecological mechanisms underlying key bottom-up forces could pave the way for developing novel pest management strategies and new optimized IPM programs.

Challenges Facing CRISPR/Cas9-Based Genome Editing in Plants

The development of plant varieties with desired traits is imperative to ensure future food security. The revolution of genome editing technologies based on the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated nuclease 9 (Cas9) system has ushered in a new era in plant breeding. Cas9 and the single-guide RNA (sgRNA) form an effective targeting complex on a locus or loci of interest, enabling genome editing in all plants with high accuracy and efficiency. Therefore, CRISPR/Cas9 can save both time and labor relative to what is typically associated with traditional breeding methods. However, despite improvements in gene editing, several challenges remain that limit the application of CRISPR/Cas9-based genome editing in plants. Here, we focus on four issues relevant to plant genome editing: (1) plant organelle genome editing; (2) transgene-free genome editing; (3) virus-induced genome editing; and (4) editing of recalcitrant elite crop inbred lines. This review provides an up-to-date summary on the state of CRISPR/Cas9-mediated genome editing in plants that will push this technique forward.

Genome editing techniques in plants: a comprehensive review and future prospects toward zero hunger

Promoting sustainable agriculture and improving nutrition are the main united nation sustainable development goals by 2030. New technologies are required to achieve zero hunger, and genome editing technology is the most promising one. In the last decade, genome editing (GE) using the CRISPR/Cas system has attracted researchers as a safer and easy tool for genome editing in several living organisms. GE has revolutionized the field of agriculture by improving biotic and abiotic stresses and yield improvement. GE technologies were developed fast lately to avoid the obstacles that face GM crops. GE technology, depending on site directed nuclease (SDN), is divided into three categories according to the modification methods. Developing transgenic-free edited plants without introducing foreign DNA meet the acceptance and regulatory ratification of several countries. There are several ongoing efforts from different countries that are rapidly expanding to adopt the current technological innovations. This review summarizes the different GE technologies and their application as a way to help in ending hunger.

Assessment on effects of transplastomic potato plants expressing Colorado potato beetle β-Actin double-stranded RNAs for three non-target pests

RNA interference has been proved as an efficient technology for pest control through the silencing of essential genes of targeted insects. We had previously shown that the expression of double-stranded RNAs (dsRNAs) in plastids of plants offers a great potential for efficiently controlling Colorado potato beetle (CPB, Leptinotarsa decemlineata) (Coleoptera, Chrysomelidae). However, whether these transplastomic plants have an impact on other non-target pests was not investigated. In this study, we evaluated the potential effects of transplastomic plants expression dsRNAs target CPB β-Actin (referred to as ACT plants) on three other potato pests: Myzus persicae (Hemiptera, Aphididae), Henosepilachna vigintioctopunctata (Coleoptera, Coccinellidae), and Spodoptera litura (Lepidoptera, Noctuidae). Although no effects on M. persicae or S. litura were observed by feeding ACT plants, we found that feeding H. vigintioctopunctata with ACT plants can result in its growth retardation and suppressing the gene expression of HvACT, which has 91.7% identity to CPB β-Actin and shared 66 potential 21-mer matches. Taking together, these results indicated that ACT plants had cross-resistance to H. vigintioctopunctata, another coleopteran insect with the highly conserved nucleotide sequence of β-Actin gene. It also provided an opportunity to simultaneously control L. decemlineata and H. vigintioctopunctata by RNAi induced by intermediate dsRNAs with optimized sequences.

Advances in application of genome editing in tomato and recent development of genome editing technology

Genome editing, a revolutionary technology in molecular biology and represented by the CRISPR/Cas9 system, has become widely used in plants for characterizing gene function and crop improvement. Tomato, serving as an excellent model plant for fruit biology research and making a substantial nutritional contribution to the human diet, is one of the most important applied plants for genome editing. Using CRISPR/Cas9-mediated targeted mutagenesis, the re-evaluation of tomato genes essential for fruit ripening highlights that several aspects of fruit ripening should be reconsidered. Genome editing has also been applied in tomato breeding for improving fruit yield and quality, increasing stress resistance, accelerating the domestication of wild tomato, and recently customizing tomato cultivars for urban agriculture. In addition, genome editing is continuously innovating, and several new genome editing systems such as the recent prime editing, a breakthrough in precise genome editing, have recently been applied in plants. In this review, these advances in application of genome editing in tomato and recent development of genome editing technology are summarized, and their leaving important enlightenment to plant research and precision plant breeding is also discussed.

An Insight Into the Mechanism of Plant Organelle Genome Maintenance and Implications of Organelle Genome in Crop Improvement: An Update

Besides the nuclear genome, plants possess two small extra chromosomal genomes in mitochondria and chloroplast, respectively, which contribute a small fraction of the organelles’ proteome. Both mitochondrial and chloroplast DNA have originated endosymbiotically and most of their prokaryotic genes were either lost or transferred to the nuclear genome through endosymbiotic gene transfer during the course of evolution. Due to their immobile nature, plant nuclear and organellar genomes face continuous threat from diverse exogenous agents as well as some reactive by-products or intermediates released from various endogenous metabolic pathways. These factors eventually affect the overall plant growth and development and finally productivity. The detailed mechanism of DNA damage response and repair following accumulation of various forms of DNA lesions, including single and double-strand breaks (SSBs and DSBs) have been well documented for the nuclear genome and now it has been extended to the organelles also. Recently, it has been shown that both mitochondria and chloroplast possess a counterpart of most of the nuclear DNA damage repair pathways and share remarkable similarities with different damage repair proteins present in the nucleus. Among various repair pathways, homologous recombination (HR) is crucial for the repair as well as the evolution of organellar genomes. Along with the repair pathways, various other factors, such as the MSH1 and WHIRLY family proteins, WHY1, WHY2, and WHY3 are also known to be involved in maintaining low mutation rates and structural integrity of mitochondrial and chloroplast genome. SOG1, the central regulator in DNA damage response in plants, has also been found to mediate endoreduplication and cell-cycle progression through chloroplast to nucleus retrograde signaling in response to chloroplast genome instability. Various proteins associated with the maintenance of genome stability are targeted to both nuclear and organellar compartments, establishing communication between organelles as well as organelles and nucleus. Therefore, understanding the mechanism of DNA damage repair and inter compartmental crosstalk mechanism in various sub-cellular organelles following induction of DNA damage and identification of key components of such signaling cascades may eventually be translated into strategies for crop improvement under abiotic and genotoxic stress conditions. This review mainly highlights the current understanding as well as the importance of different aspects of organelle genome maintenance mechanisms in higher plants.

Codon usage pattern and genetic diversity in chloroplast genomes of Panicum species

Exploring the molecular identities and the genetic diversity of a plant species is crucial in figuring out the evolutionary pressure of genes as well as in molecular breeding application. Nineteen chloroplast genomes of Panicum species in the National Center for Biotechnology Information database were downloaded and analyzed. The base composition, the effective number of codons, the relative synonymous codon usage, the codon bias index and the codon adaptation index of all genes in all chloroplast genomes, as well as the correlation coefficient among them, were calculated and discussed. The correspondence analysis and the clustering characteristics among nineteen genomes base on the relative synonymous codon usage values of nineteen chloroplast genomes were calculated and analyzed. In order to figuring out the evolutionary diversity of certain genes, the codon usage pattern of forty-one typical genes were separately counted and compared. Summations of their standard deviations were considered to evaluate their genetic diversities. The results of codon usage pattern showed that all genes were obvious AU-rich ones in chloroplast genomes of Panicum species, revealing that the natural selection was the main factor that influenced their evolutionary process. The correspondence and clustering analysis among nineteen chloroplast genomes showed that the overall evolutionary differences among them were not significant. However, the analysis on the genetic diversity of tyical genes showed that the degrees of diversity are different, and that the shorter sequences are more prone to instability. These findings would improve our understanding on the evolution of chloroplast genomes of Panicum species and be useful for further study on their evolutionary phenomenon.

Reference-based assembly of chloroplast genome from leaf transcriptome data of Pterocarpus santalinus

Chloroplast genome sequencing is an essential tool to understand genome evolution and phylogenetic relationship. The available methods for constructing chloroplast genome include chloroplast enrichment followed by long overlapping PCR or extraction and assembly of chloroplast-specific reads from whole-genome datasets. In the present study, we propose an alternate strategy of extraction and assembly of chloroplast-specific reads from leaf transcriptome data of Pterocarpus santalinus using bowtie2 aligner program. The assembled genome was compared with the published chloroplast genome of P. santalinus for genome size, number of predicted genes, microsatellite repeat motifs, and nucleotide repeats. A near-complete chloroplast genome was assembled from the transcriptome reads. The proposed method requires less computational time and know-how, limited virtual memory, and is cost-effective when compared to whole-genome sequencing. Assembly of Cp genome from transcriptome data will enhance the resolution of phylogenetic studies through comparative plastome analysis, facilitate accurate species/genotype discrimination and accelerate the development of transplastomic plants with enhanced biotic and abiotic tolerance.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02943-0.