Cyclic mechanical strain maintains Nanog expression through PI3K/Akt signaling in mouse embryonic stem cells

Impact of Uniaxial Static Strain on Myoblast Differentiation in Collagen-Coated PCL Microfilament Scaffolds: Role of Onset Time of Mechanical Stimulation

Tissue engineering endeavors to create in vitro constructs that replicate the properties of native tissue, such as skeletal muscle. This study investigated the use of mechanical stimulation to promote myogenic differentiation and enhance the functionality of bioengineered tissues. Specifically, it aimed to facilitate the differentiation of myoblasts within a three-dimensional scaffold using a defined pattern of mechanical stimulation. C2C12 cells were cultured on a collagen-coated PCL microfilament scaffold and subjected to 24 h of uniaxial static strain using a biomechanical stimulation system. Two onset times of stimulation, 72 h and 120 h post-seeding, were evaluated. Cell proliferation, myogenic marker expression, and alterations in cell morphology and orientation were assessed. Results indicate that static strain on the scaffold promoted myoblast differentiation, evidenced by morphological and molecular changes. Notably, strain initiated at 72 h induced an early differentiation stage marked by MyoD expression, whereas stimulation beginning at 120 h led to a mid-stage differentiation characterized by the co-expression of MyoD and Myogenin, culminating in myotube formation. These results highlight the critical influence of myoblast maturity at the time of strain application on the differentiation outcome. This study provides insights that could guide the optimization of mechanical stimulation protocols in tissue engineering applications.

Effect of Static and Dynamic Stretching on Corneal Fibroblast Cell

A strain gradient was created by punching a hole in the center of a stretched elastic polydimethylsiloxane membrane to determine the effect of different strains on cultured human keratocytes (HK). In this study, two stretching methods were used: continuous stretching and cyclic stretching. Continuous stretching is relatively static, while acyclic stretching is relatively dynamic. These methods, respectively, represented the effects of high intraocular pressure and rubbing of the eyes on corneal cells. Image processing codes were developed to observe the effects of stress concentration, shear stress, continuous stretching, and cyclic stretching on HKs. The results demonstrate that stretching and shear stress are not conducive to the proliferation of corneal cells and instead cause cell death. A 10% strain had greater inhibitory effects than a 3% strain on cell proliferation. Cell survival rates for continuous stretching (static) were higher than those for cyclic stretching (dynamic). The stretching experiment revealed that cyclic stretching has a greater inhibitory effect on the growth and proliferation of corneal cells than continuous stretching. Accordingly, it shows that cyclic loading is more harmful than high intraocular pressure (static loading) to corneal cells.

A Novel In Vitro Simulator to Investigate Promotion of Reconstruction of Damaged Neuronal Cell Colony Differentiated from iPS Cells with the Aid of Micro Dynamic Stimulation

Neuronal cells are equipped with the function of a sensor that senses stimulation and elongates neurites to connect nearby neuronal cells in forming a neuronal network, as they are generally said to be hard to recover from physical damage, such as in the case of a spinal cord injury. Therefore, in this study, a novel in vitro simulator in which micro dynamic stimulations are applied to a damaged neuronal cell colony artificially is proposed to investigate the possibility of promoting the reconstruction of damaged neuronal cells on a colony basis. A neuronal cell colony differentiated from iPS cells is physically damaged by cutting off treatment, and micro dynamic stimulations are applied to the colony by utilizing a developed mini-vibration table system. NeuroFluor NeuO is used to establish a method for fluorescent staining of the living neuronal cells, and morphologies of the reconstructing neurons are analysed, revealing a relationship between the stimulation and the reconstructing process of the damaged neurons. It is found that significant differences are observed in the reconstructing efficiency between the statically cultured damaged neuronal cell colony and the dynamically stimulated one. The results suggest that applying appropriate micro dynamic stimulations is a promising approach to promote the reconstruction of a damaged neuronal cell colony.

Mechanical loading and the control of stem cell behavior

OBJECTIVE

Mechanical stimulation regulates many cell responses. The present study describes the effects of different in vitro mechanical stimulation approaches on stem cell behavior.

DESIGN

The narrative review approach was performed. The articles published in English language that addressed the effects of mechanical force on stem cells were searched on Pubmed and Scopus database. The effects of extrinsic mechanical force on stem cell response was reviewed and discussed.

RESULTS

Cells sense mechanical stimuli by the function of mechanoreceptors and further transduce force stimulation into intracellular signaling. Cell responses to mechanical stimuli depend on several factors including type, magnitude, and duration. Further, similar mechanical stimuli exhibit distinct cell responses based on numerous factors including cell type and differentiation stage. Various mechanical applications modulate stemness maintenance and cell differentiation toward specific lineages.

CONCLUSIONS

Mechanical force application modulates stemness maintenance and differentiation. Modification of force regimens could be utilized to precisely control appropriate stem cell behavior toward specific applications.

A Shaking-Culture Method for Generating Bone Marrow Derived Mesenchymal Stromal/Stem Cell-Spheroids With Enhanced Multipotency in vitro

Mesenchymal stromal/stem cells (MSCs), which generally expand into adherent monolayers, readily lose their proliferative and multilineage potential following repeated passages. Floating culture systems can be used to generate MSC spheroids, which are expected to overcome limitations associated with conventional adherent cultures while facilitating scaffold-free cell transplantation. However, the phenotypic characteristics of spheroids after long-term culture are unknown. In addition, regenerative therapies require new culture systems to maintain their undifferentiated state. In this study, we established a novel culture method employing three-dimensional (3D) “shaking” to generate MSC spheroids using bone marrow derived MSCs. Floating 3D cultures of mouse or human MSCs formed spheroids after shaking (85–95 rpm), within 1 month. These spheroids maintained their osteogenic-, adipogenic-, and chondrogenic-differentiation capacity. The adipogenic-differentiation capacity of adherent cultured mouse and human MSCs, which is lost following several passages, was remarkedly restored by shaking-culture. Notably, human MSC spheroids exhibited a renewable “undifferentiated MSC-pool” property, wherein undifferentiated MSCs grew from spheroids seeded repeatedly on a plastic culture dish. These data suggest that the shaking-culture method maintains and restores multipotency that is lost following monolayer expansion and thereby shows potential as a promising strategy for regenerative therapies with mesenchymal tissues.

Mechanomics analysis of hESCs under combined mechanical shear, stretch, and compression

Human embryonic stem cells (hESCs) can differentiate to three germ layers within biochemical and biomechanical niches. The complicated mechanical environments in vivo could have diverse effects on the fate decision and biological functions of hESCs. To globally screen mechanosensitive molecules, three typical types of mechanical stimuli, i.e., tensile stretch, shear flow, and mechanical compression, were applied in respective parameter sets of loading pattern, amplitude, frequency, and/or duration, and then, iTRAQ proteomics test was used for identifying and quantifying differentially expressed proteins in hESCs. Bioinformatics analysis identified 37, 41, and 23 proteins under stretch pattern, frequency, and duration, 13, 18, and 41 proteins under shear pattern, amplitude, and duration, and 4, 0, and 183 proteins under compression amplitude, frequency, and duration, respectively, where distinct parameters yielded the differentially weighted preferences under each stimulus. Ten mechanosensitive proteins were commonly shared between two of three mechanical stimuli, together with numerous proteins identified under single stimulus. More importantly, functional GSEA and WGCNA analyses elaborated the variations of the screened proteins with loading parameters. Common functions in protein synthesis and modification were identified among three stimuli, and specific functions were observed in skin development under stretch alone. In conclusion, mechanomics analysis is indispensable to map actual mechanosensitive proteins under physiologically mimicking mechanical environment, and sheds light on understanding the core hub proteins in mechanobiology.

Low intensity pulsed ultrasound (LIPUS) maintains osteogenic potency by the increased expression and stability of Nanog through spleen tyrosine kinase (Syk) activation

Mesenchymal stem cells (MSCs) are a powerful tool for cell-based, clinical therapies like bone regeneration. Therapeutic use of cell transplantation requires many cells, however, the expansion process needed to produce large quantities of cells reduces the differentiation potential of MSCs. Here, we examined the protective effects of low intensity pulsed ultrasound (LIPUS) on the maintenance of osteogenic potency. Primary osteoblastic cells were serially passaged between 2 and 12 times with daily LIPUS treatment. We found that LIPUS stimulation maintains osteogenic differentiation capacity in serially passaged cells, as characterized by improved matrix mineralization and Osteocalcin mRNA expression. Decreased expression of Nanog, Sox2, and Msx2, and increased expression of Pparg2 from serial passaging was recovered in LIPUS-stimulated cells. We found that LIPUS stimulation not only increased but also sustained expression of Nanog in primary osteoblasts and ST2 cells, a mouse mesenchymal stromal cell line. Nanog overexpression in serially passaged cells mimicked the recuperative effects of LIPUS on osteogenic potency, highlighting the important role of Nanog in LIPUS stimulation. Additionally, we found that spleen tyrosine kinase (Syk) is an important signaling molecule to induce Nanog expression in LIPUS-stimulated cells. Syk activation was regulated by both Rho-associated kinase 1 (ROCK1) and extracellular ATP in a paracrine manner. Interestingly, the LIPUS-induced increase in Nanog mRNA expression was regulated by ATP-P2X4-Syk Y323 activation, while the improvement of Nanog protein stability was controlled by the ROCK1-Syk Y525/526 pathway. Taken together, these results indicate that LIPUS stimulation recovers and maintains the osteogenic potency of serially passaged cells through a Syk-Nanog axis.

Size-Dependent Cortical Compaction Induces Metabolic Adaptation in Mesenchymal Stem Cell Aggregates

IMPACT STATEMENT

This study reveals that multicellular aggregation induces metabolic reprogramming via mechanical compaction in lieu of formation of a hypoxic core. Utilizing biomechanical knowledge gained from planar culture, we set forth a novel three-dimensional (3D) model of size-dependent cortical compaction and demonstrated its role in metabolic reconfiguration. Ultimately, this study establishes mechanical compaction and its spatial gradients as key regulatory factors and design parameters in the development of 3D human adipose-derived mesenchymal stem cell aggregates.

Periostin plays role in force-induced stem cell potential by periodontal ligament stem cells

Mechanical stimuli have been shown to play an important role in directing stem cell fate and maintenance of tissue homeostasis. One of the functions of the mechanoresponsive tissue periodontal ligament (PDL) is to withstand the functional forces within the oral cavity. Periodontal ligament stem cells (PDLSCs) derived from periodontal tissue have been demonstrated to be able to respond directly to mechanical forces. However, the mechanisms of action of mechanical force on PDLSCs are not totally understood. The aim of this study was to investigate the mechanisms by which compressive force affects PDLSCs, especially their stemness properties. PDLSCs were established from extracted human third molars; their stem cell characteristics were validated by detecting the expression of stem cell markers and confirming their ability to differentiate into osteogenic and adipogenic lineages. PDLSCs were subjected to various magnitudes of static compressive force (0 [control], 0.5, 1.0, 1.5, or 2 g/cm² ). Application of 1.0 g/cm² compressive force significantly upregulated a panel of stem cell marker genes, including NANOG and OCT4. Conversely, higher force magnitudes downregulated these genes. Mechanical loading also upregulated periostin, a matrix protein that plays important roles in tissue morphogenesis. Interestingly, knockdown of periostin using siRNA abolished force-induced stem cell marker expression in PDLSCs. This study suggests a proper magnitude of compressive force could be one important factor involved in the modulation of the pluripotency of PDLSCs through the action of periostin. The precise mechanism by which periostin regulates stemness requires further detailed investigation.

Single cell analysis reveals a biophysical aspect of collective cell-state transition in embryonic stem cell differentiation

In the stem cell research field, the molecular regulatory network used to define cellular states has been extensively studied, however, the general driving force guiding the collective state dynamics remains to be identified from biophysical aspects. Here we monitored the time-development of the cell-state transition at the single-cell and colony levels, simultaneously, during the early differentiation process in mouse embryonic stem cells. Our quantitative analyses revealed that cellular heterogeneity was a result of spontaneous fluctuation of cellular state and cell-cell cooperativity. We considered that the cell state is like a ball fluctuating on a potential landscape, and found that the cooperativity affects the fluctuation. Importantly, the cooperativity temporarily decreased and increased in the intermediate state of cell differentiation, leading to cell-state transition in unison. This process can be explained using the mathematical equation of flashing-ratchet behaviour, which suggests that a general mechanism is driving the collective decision-making of stem cells.

Edges of human embryonic stem cell colonies display distinct mechanical properties and differentiation potential

In order to understand the mechanisms that guide cell fate decisions during early human development, we closely examined the differentiation process in adherent colonies of human embryonic stem cells (hESCs). Live imaging of the differentiation process reveals that cells on the outer edge of the undifferentiated colony begin to differentiate first and remain on the perimeter of the colony to eventually form a band of differentiation. Strikingly, this band is of constant width in all colonies, independent of their size. Cells at the edge of undifferentiated colonies show distinct actin organization, greater myosin activity and stronger traction forces compared to cells in the interior of the colony. Increasing the number of cells at the edge of colonies by plating small colonies can increase differentiation efficiency. Our results suggest that human developmental decisions are influenced by cellular environments and can be dictated by colony geometry of hESCs.

Isoflurane inhibits embryonic stem cell self-renewal through retinoic acid receptor

The commonly used inhalation anesthetic isoflurane could permeate rapidly through the placental barrier and induce toxicity to the central nervous system of the developing fetus. However, the effects of isoflurane in utero during early gestation are unknown. We therefore treated pregnant mice with 1.4% isoflurane for 2h per day for three days at day3.5 (E3.5) to day6.5 (E6.5) to investigated the toxicity of isoflurane. Pregnant mice were executed and the fetal mice were weighed and observed. Mouse ESCs (E14) was exposed to 2% isoflurane for 6h. Twenty-four hours later, self-renewal was examined with AP staining. Effects of isoflurane on the expression of RAR-γ were examined using Western blot. As a result, anesthesia with 1.4% isoflurane for 2 hour per day for 3 days reduced fetal growth and development. Isoflurane decreased self-renewal and the expression stemness genes (Nanog, Oct4, Sox2, and Lin28) in mESCs. Vitamin A attenuated the effects of isoflurane inducing self-renewal inhibition. In summary, Anesthesia with 1.4% isoflurane for 2h per day for 3 days reduced fetal growth and development. Moreover, isoflurane inhibits mESCs self-renewal through retinoic acid receptor.

Isolation of adipose and bone marrow mesenchymal stem cells using CD29 and CD90 modifies their capacity for osteogenic and adipogenic differentiation

Mesenchymal stem cells isolated from rats are frequently used for tissue engineering research. However, considerable differences have been identified between rat mesenchymal stem cells and those derived from humans, and no defined panel of markers currently exists for the isolation of these cells. The aim of this study was to examine the effects of cell sorting for CD29⁺/CD90⁺ cells from rat adipose and bone marrow tissues on their differentiation and expression of stem cell–associated genes. Flow cytometry showed 66% and 78% CD29⁺/CD90⁺ positivity within passage 1 of adipose and bone marrow cultures, respectively. CD29⁺/CD90⁺ cells showed a reduction in both osteogenic and adipogenic differentiation when compared with unsorted cells, as determined by alizarin red and Oil Red-O staining, respectively. These findings could not entirely be explained by fluorescence-activated cell sorting–induced cell injury as sort recovery was only modestly affected in adipose-derived cells. Maintaining cells in fluorescence-activated cell sorting buffer did not affect adipose-derived cell viability, but a significant (p < 0.05) reduction was found in bone marrow–derived cell viability. Additionally, CD29⁺/CD90⁺ selection was associated with a significant decrease in the expression of Lin28, Sox2, Nanog and CD73 in adipose-derived cell cultures, whereas differences in stem cell–associated gene expression were not observed in sorted bone marrow–derived cell cultures. In summary, this study demonstrated that fluorescence-activated cell sorting had differential effects on adipose-derived cells and bone marrow–derived cells, and both CD29⁺/CD90⁺ cells displayed a significantly reduced capacity for osteogenic/adipogenic differentiation. In conclusion, we identify that maintaining heterogeneity within the mesenchymal stem cell population may be important for optimal differentiation.

Engineering myocardial tissue patches with hierarchical structure-function

Complex hierarchical organization is a hallmark of tissues and their subsequent integration into organs. A major challenge in tissue engineering is to generate arrays of cells with defined structural organization that display appropriate functional properties. Given what is known about cellular responses to physiochemical cues from the surrounding environment, we can build tissue structures that mimic these microenvironments and validate these platforms using both experimental and computational approaches. Tissue generation encompasses many methods and tissue types, but here we review layering cell sheets to create scaffold-less myocardial patches. We discuss surgical criteria that can drive the design of myocardial cell sheets and the methods used to fabricate, mechanically condition, and functionally test them. We also focus on how computational and experimental approaches could be integrated to optimize tissue mechanical properties by using measurements of biomechanical properties and tissue anisotropy to create predictive computational models. Tissue anisotropy and dynamic mechanical stimuli affect cell phenotype in terms of protein expression and secretion, which in turn, leads to compositional and structural changes that ultimately impact tissue function. Therefore, a combinatorial approach of design, fabrication, testing, and modeling can be carried out iteratively to optimize engineered tissue function.

Topography design concept of a tissue engineering scaffold for controlling cell function and fate through actin cytoskeletal modulation

The physiological role of the actin cytoskeleton is well known: it provides mechanical support and endogenous force generation for formation of a cell shape and for migration. Furthermore, a growing number of studies have demonstrated another significant role of the actin cytoskeleton: it offers dynamic epigenetic memory for guiding cell fate, in particular, proliferation and differentiation. Because instantaneous imbalance in the mechanical homeostasis is adjusted through actin remodeling, a synthetic extracellular matrix (ECM) niche as a source of topographical and mechanical cues is expected to be effective at modulation of the actin cytoskeleton. In this context, the synthetic ECM niche determines cell migration, proliferation, and differentiation, all of which have to be controlled in functional tissue engineering scaffolds to ensure proper regulation of tissue/organ formation, maintenance of tissue integrity and repair, and regeneration. Here, with an emphasis on the epigenetic role of the actin cytoskeletal system, we propose a design concept of micro/nanotopography of a tissue engineering scaffold for control of cell migration, proliferation, and differentiation in a stable and well-defined manner, both in vitro and in vivo.

Differential regulation of morphology and stemness of mouse embryonic stem cells by substrate stiffness and topography

The maintenance of stem cell pluripotency or stemness is crucial to embryonic development and differentiation. The mechanical or physical microenvironment of stem cells, which includes extracellular matrix stiffness and topography, regulates cell morphology and stemness. Although a growing body of evidence has shown the importance of these factors in stem cell differentiation, the impact of these biophysical or biomechanical regulators remains insufficiently characterized. In the present study, we applied a micro-fabricated polyacrylamide hydrogel substrate with two elasticities and three topographies to systematically test the morphology, proliferation, and stemness of mESCs. The independent or combined impact of the two factors on specific cell functions was analyzed. Cells are able to grow effectively on both polystyrene and polyacrylamide substrates in the absence of feeder cells. Substrate stiffness is predominant in preserving stemness by enhancing Oct-4 and Nanog expression on a soft polyacrylamide substrate. Topography is also a critical factor for manipulating stemness via the formation of a relatively flattened colony on a groove or pillar substrate and a spheroid colony on a hexagonal substrate. Although topography is less effective on soft substrates, it plays a role in retaining cell stemness on stiff, hexagonal or pillar-shaped substrates. mESCs also form, in a timely manner, a 3D structure on groove or hexagonal substrates. These results further the understanding of stem cell morphology and stemness in a microenvironment that mimics physiological conditions.

Modulating the actin cytoskeleton affects mechanically induced signal transduction and differentiation in mesenchymal stem cells

Mechanical interactions of mesenchymal stem cells (MSC) with the environment play a significant role in controlling the diverse biological functions of these cells. Mechanical forces are transduced by integrins to the actin cytoskeleton that functions as a scaffold to switch mechanical signals into biochemical pathways. To explore the significance of cytoskeletal mechanisms in human MSC we modulated the actin cytoskeleton using the depolymerising drugs cytochalasin D (CytD) and latrunculin A (LatA), as well as the stabilizing drug jasplakinolide (Jasp) and examined the activation of the signalling molecules ERK and AKT during mechanical loading. All three drugs provoked significant changes in cell morphology and organisation of the cytoskeleton. Application of mechanical forces to β1-integrin receptors using magnetic beads without deformation of the cell shape induced a phosphorylation of ERK and AKT. Of the two drugs that inhibited the cytoskeletal polymerization, LatA completely blocked the activation of ERK and AKT due to mechanical forces, whereas CytD inhibited the activation of AKT but not of ERK. Activation of both signalling molecules by integrin loading was not affected due to cell treatment with the cytoskeleton stabilizing drug Jasp. To correlate the effects of the drugs on mechanically induced activation of AKT and ERK with parameters of MSC differentiation, we studied ALP activity as a marker for osteogenic differentiation and examined the uptake of fat droplets as marker for adipogenic differentiation in the presence of the drugs. All three drugs inhibited ALP activity of MSC in osteogenic differentiation medium. Adipogenic differentiation was enhanced by CytD and Jasp, but not by LatA. The results indicate that modulation of the cytoskeleton using perturbing drugs can differentially modify both mechanically induced signal transduction and MSC differentiation. In addition to activation of the signalling molecules ERK and AKT, other cytoskeletal mechanisms are involved in MSC differentiation.