Precise metabolic engineering of carotenoid biosynthesis in Escherichia coli towards a low-cost biosensor

Development of lycopene-based whole-cell biosensors for the visual detection of trace explosives and heavy metals

Residual explosives in conflicting zones have caused irreversible damage to human safety and the environment. Whole-cell biosensors can to detect remnants of buried explosives, such as 2,4-dinitrotoluene (DNT), a stable and highly volatile compound in explosives. However, all the reported whole-cell biosensors utilize fluorescence or luminescence as the biological markers, making their detection difficult in real minefields. Here, we presented a lycopene-based whole-cell biosensor in Escherichia coli to output visible signals in response to DNT, which can help in the visual detection of buried explosives. To construct the whole-cell biosensor, the DNT-responsive promoter yqjF was used as the sensing element, and the lycopene synthetic gene cassette crtEBI was served as the reporting element. Then, the metabolic flux for lycopene production was enhanced to improve the output signal of the whole-cell biosensor, and a terminator was utilized to reduce the background interference. The optimized biosensor LSZ05 could perceive at least 1 mg/L DNT. The DNT-specificity and robust performance of the biosensor under different environmental factors were confirmed. Our results showed that converting the biosensor into a lyophilized powder was an effective storage method. The biosensor LSZ05 could effectively detect DNT in two kinds of soil samples. The lycopene-based whole-cell biosensor could also be used to visually detect heavy metals. Our findings laid the foundation for visually detecting buried explosives in minefields, which was a valuable supplement to the reported biosensors. The methods used for optimizing the lycopene-based whole-cell biosensor, including the improvement of the output signal and reduction of background interference, were quite effective.

Transcription factor-based biosensors for screening and dynamic regulation

Advances in synthetic biology and genetic engineering are bringing into the spotlight a wide range of bio-based applications that demand better sensing and control of biological behaviours. Transcription factor (TF)-based biosensors are promising tools that can be used to detect several types of chemical compounds and elicit a response according to the desired application. However, the wider use of this type of device is still hindered by several challenges, which can be addressed by increasing the current metabolite-activated transcription factor knowledge base, developing better methods to identify new transcription factors, and improving the overall workflow for the design of novel biosensor circuits. These improvements are particularly important in the bioproduction field, where researchers need better biosensor-based approaches for screening production-strains and precise dynamic regulation strategies. In this work, we summarize what is currently known about transcription factor-based biosensors, discuss recent experimental and computational approaches targeted at their modification and improvement, and suggest possible future research directions based on two applications: bioproduction screening and dynamic regulation of genetic circuits.

Strategies for Improving Small-Molecule Biosensors in Bacteria

In recent years, small-molecule biosensors have become increasingly important in synthetic biology and biochemistry, with numerous new applications continuing to be developed throughout the field. For many biosensors, however, their utility is hindered by poor functionality. Here, we review the known types of mechanisms of biosensors within bacterial cells, and the types of approaches for optimizing different biosensor functional parameters. Discussed approaches for improving biosensor functionality include methods of directly engineering biosensor genes, considerations for choosing genetic reporters, approaches for tuning gene expression, and strategies for incorporating additional genetic modules.

Gold-Specific Biosensor for Monitoring Wastewater Using Genetically Engineered Cupriavidus metallidurans CH34

Transcription factor-based whole-cell biosensors have recently become promising alternatives to conventional analytical methods due to their advantage of simplicity, cost-effectiveness, and environmental friendliness. In this study, we used genetic engineering to develop a whole-cell biosensor based on the activation of promoters by CupR via interactions with gold ions, leading to the expression of reporter genes that yield output signals. Altering the promoter sequences was shown to significantly improve the performance of the biosensor strain in terms of gold-specificity. The detection sensitivity of our engineered strains was 42-fold higher than that of wild-type strains. The linear range of the purposed sensor was 125-1000 nM with a limit of detection at 46.5 nM. The effectiveness of the sensor strain was verified in wastewater samples.

Gut Microbes and Eye Disease

Microbial symbionts in the gut are increasingly recognized as having important effects on health and disease, but have only recently begun to be linked to diseases of the eye. We review current research on the intestinal microbiota's relationship to ocular disease, focusing on autoimmune uveitis, diabetic retinopathy, age-related macular degeneration, and primary-open angle glaucoma. We discuss findings and limitations of this exciting new area of ophthalmology research and explore possible future disease-modifying treatments.

Dynamic Control of Gene Expression with Riboregulated Switchable Feedback Promoters

One major challenge in synthetic biology is the deleterious impacts of cellular stress caused by expression of heterologous pathways, sensors, and circuits. Feedback control and dynamic regulation are broadly proposed strategies to mitigate this cellular stress by optimizing gene expression levels temporally and in response to biological cues. While a variety of approaches for feedback implementation exist, they are often complex and cannot be easily manipulated. Here, we report a strategy that uses RNA transcriptional regulators to integrate additional layers of control over the output of natural and engineered feedback responsive circuits. Called riboregulated switchable feedback promoters (rSFPs), these gene expression cassettes can be modularly activated using multiple mechanisms, from manual induction to autonomous quorum sensing, allowing control over the timing, magnitude, and autonomy of expression. We develop rSFPs in Escherichia coli to regulate multiple feedback networks and apply them to control the output of two metabolic pathways. We envision that rSFPs will become a valuable tool for flexible and dynamic control of gene expression in metabolic engineering, biological therapeutic production, and many other applications.

Translating New Synthetic Biology Advances for Biosensing Into the Earth and Environmental Sciences

The rapid diversification of synthetic biology tools holds promise in making some classically hard-to-solve environmental problems tractable. Here we review longstanding problems in the Earth and environmental sciences that could be addressed using engineered microbes as micron-scale sensors (biosensors). Biosensors can offer new perspectives on open questions, including understanding microbial behaviors in heterogeneous matrices like soils, sediments, and wastewater systems, tracking cryptic element cycling in the Earth system, and establishing the dynamics of microbe-microbe, microbe-plant, and microbe-material interactions. Before these new tools can reach their potential, however, a suite of biological parts and microbial chassis appropriate for environmental conditions must be developed by the synthetic biology community. This includes diversifying sensing modules to obtain information relevant to environmental questions, creating output signals that allow dynamic reporting from hard-to-image environmental materials, and tuning these sensors so that they reliably function long enough to be useful for environmental studies. Finally, ethical questions related to the use of synthetic biosensors in environmental applications are discussed.

Improvement of l-Valine Production by Atmospheric and Room Temperature Plasma Mutagenesis and High-Throughput Screening in Corynebacterium glutamicum

As one of the branched-chain amino acids, l-valine is an essential nutrient for most mammalian species. In this study, the l-valine producer Corynebacterium glutamicum ΔppcΔaceEΔalatΔpqo was first constructed. Additionally, an improved biosensor based on the Lrp-type transcriptional regulator and temperature-sensitive replication was built. Then, the C. glutamicum strain was mutagenized by atmospheric and room temperature plasma. A sequential three-step procedure was carried out to screen l-valine-producing strains, including the fluorescence-activated cell sorting (FACS), 96-well plate screening, and flask fermentation. The final mutant HL2-7 obtained by screening produced 3.20 g/L of l-valine, which was 21.47% higher than the titer produced by the starting strain. This study demonstrates that the l-valine-producing mutants can be successfully isolated based on the Lrp sensor system in combination with FACS screening after random mutagenesis.

Dynamic and tunable metabolite control for robust minimal-equipment assessment of serum zinc

Bacterial biosensors can enable programmable, selective chemical production, but difficulties incorporating metabolic pathways into complex sensor circuits have limited their development and applications. Here we overcome these challenges and present the development of fast-responding, tunable sensor cells that produce different pigmented metabolites based on extracellular concentrations of zinc (a critical micronutrient). We create a library of dual-input synthetic promoters that decouple cell growth from zinc-specific metabolite production, enabling visible cell coloration within 4 h. Using additional transcriptional and metabolic control methods, we shift the response thresholds by an order of magnitude to measure clinically relevant zinc concentrations. The resulting sensor cells report zinc concentrations in individual donor serum samples; we demonstrate that they can provide results in a minimal-equipment fashion, serving as the basis for a field-deployable assay for zinc deficiency. The presented advances are likely generalizable to the creation of other types of sensors and diagnostics.

Tightly controlling cell output is challenging, which has limited development and applications of bacterial sensors. Here the authors develop tunable, fast-responding sensors to control production of metabolic pigments and use them to assess zinc deficiency in a low-cost, minimal equipment fashion.

Point-of-care biomarker quantification enabled by sample-specific calibration

Easy-to-perform, relatively inexpensive blood diagnostics have transformed at-home healthcare for some patients, but they require analytical equipment and are not easily adapted to measuring other biomarkers. The requirement for reliable quantification in complex sample types (such as blood) has been a critical roadblock in developing and deploying inexpensive, minimal-equipment diagnostics. Here, we developed a platform for inexpensive, easy-to-use diagnostics that uses cell-free expression to generate colored readouts that are visible to the naked eye, yet quantitative and robust to the interference effects seen in complex samples. We achieved this via a parallelized calibration scheme that uses the patient sample to generate custom reference curves. We used this approach to quantify a clinically relevant micronutrient and to quantify nucleic acids, demonstrating a generalizable platform for low-cost quantitative diagnostics.

Heterologous Production of Squalene from Glucose in Engineered Corynebacterium glutamicum Using Multiplex CRISPR Interference and High-Throughput Fermentation

The sustainable production of squalene has driven the development of microbial cell factories due to the limitation of low-yielding bioprocesses from plants and illegal harvesting shark liver. We report the metabolic engineering of Corynebacterium glutamicum to produce squalene from glucose. Combinatorial metabolic engineering strategies for precursor rebalancing, redox balancing, and blocking the competing pathway for the isopentenyl diphosphate availabilities were applied by repressing the target genes using the CRISPR interference. The best engineered strain using high-throughput fermentation produced squalene from glucose at 5.4 ± 0.3 mg/g dry cell weight (DCW) and 105.3 ± 3.0 mg/L, which was a 5.2-fold increase over the parental strain. In addition, flask cultivation of C. glutamicum overexpressing the dxs and idi genes with squalene synthase gene and repressing the idsA gene resulted in production of squalene at 5.8 ± 0.4 mg/g DCW and 82.8 ± 6.2 mg/L, which was a 3.4-fold increase over the parental strain.

In vivo biosensors: mechanisms, development, and applications

In vivo biosensors can recognize and respond to specific cellular stimuli. In recent years, biosensors have been increasingly used in metabolic engineering and synthetic biology, because they can be implemented in synthetic circuits to control the expression of reporter genes in response to specific cellular stimuli, such as a certain metabolite or a change in pH. There are many types of natural sensing devices, which can be generally divided into two main categories: protein-based and nucleic acid-based. Both can be obtained either by directly mining from natural genetic components or by engineering the existing genetic components for novel specificity or improved characteristics. A wide range of new technologies have enabled rapid engineering and discovery of new biosensors, which are paving the way for a new era of biotechnological progress. Here, we review recent advances in the design, optimization, and applications of in vivo biosensors in the field of metabolic engineering and synthetic biology.

Metabolomics Analysis of the Toxic Effects of the Production of Lycopene and Its Precursors

Using cells as microbial factories enables highly specific production of chemicals with many advantages over chemical syntheses. A number of exciting new applications of this approach are in the area of precision metabolic engineering, which focuses on improving the specificity of target production. In recent work, we have used precision metabolic engineering to design lycopene-producing Escherichia coli for use as a low-cost diagnostic biosensor. To increase precursor availability and thus the rate of lycopene production, we heterologously expressed the mevalonate pathway. We found that simultaneous induction of these pathways increases lycopene production, but induction of the mevalonate pathway before induction of the lycopene pathway decreases both lycopene production and growth rate. Here, we aim to characterize the metabolic changes the cells may be undergoing during expression of either or both of these heterologous pathways. After establishing an improved method for quenching E. coli for metabolomics analysis, we used two-dimensional gas chromatography coupled to mass spectrometry (GCxGC-MS) to characterize the metabolomic profile of our lycopene-producing strains in growth conditions characteristic of our biosensor application. We found that the metabolic impacts of producing low, non-toxic levels of lycopene are of much smaller magnitude than the typical metabolic changes inherent to batch growth. We then used metabolomics to study differences in metabolism caused by the time of mevalonate pathway induction and the presence of the lycopene biosynthesis genes. We found that overnight induction of the mevalonate pathway was toxic to cells, but that the cells could recover if the lycopene pathway was not also heterologously expressed. The two pathways appeared to have an antagonistic metabolic effect that was clearly reflected in the cells’ metabolic profiles. The metabolites homocysteine and homoserine exhibited particularly interesting behaviors and may be linked to the growth inhibition seen when the mevalonate pathway is induced overnight, suggesting potential future work that may be useful in engineering increased lycopene biosynthesis.

Development of a Pigment-Based Whole-Cell Zinc Biosensor for Human Serum

Deficiencies in vitamins and minerals (micronutrients) are a critical global health concern, in part due to logistical difficulties in assessing population micronutrient status. Whole-cell biosensors offer a unique opportunity to address this issue, with the potential to move sample analysis from centralized, resource-intensive clinics to minimal-resource, on-site measurement. Here, we present a proof-of-concept whole-cell biosensor in Escherichia coli for detecting zinc, a micronutrient for which deficiencies are a significant public health burden. Importantly, the whole-cell biosensor produces readouts (pigments) that are visible to the naked eye, mitigating the need for measurement equipment and thus increasing feasibility for sensor field-friendliness and affordability at a global scale. Two zinc-responsive promoter/transcription factor systems are used to differentially control production of three distinctly colored pigments in response to zinc levels in culture. We demonstrate strategies for tuning each zinc-responsive system to turn production of the different pigments on and off at different zinc levels, and we demonstrate production of three distinct color regimes over a concentration range relevant to human health. We also demonstrate the ability of the sensor cells to grow and produce pigment when cultured in human serum, the ultimate target matrix for assessing zinc nutritional status. Specifically, we present approaches to overcome innate immune responses that would otherwise hinder bacterial sensor survival, and we demonstrate production of multiple pigment regimes in human serum with different zinc levels. This work provides proof of principle for the development of low-cost, minimal-equipment, field-deployable biosensors for nutritional epidemiology applications.

Enabling Graded and Large-Scale Multiplex of Desired Genes Using a Dual-Mode dCas9 Activator in Saccharomyces cerevisiae

Standard approaches for dCas9-based modification of gene expression are limited in the ability to multiplex targets, establish streamlined cassettes, and utilize commonly studied Pol II promoters. In this work, we repurpose the dCas9-VPR activator to act as a dual-mode activator/repressor that can be programmed solely on the basis of target position at gene loci. Furthermore, we implement this approach using a streamlined Pol II-ribozyme system that allows expression of many sgRNAs from a single transcript. By "stepping" dCas9-VPR within the promoter region and ORF we create graded activation and repression (respectively) of target genes, allowing precise control over multiplexed gene modulation. Expression from the Pol II system increased the net amount of sgRNA production in cells by 3.88-fold relative to the Pol III SNR52 promoter, leading to a significant improvement in dCas9-VPR repression strength. Finally, we utilize our Pol II system to create galactose-inducible switching of gene expression states and multiplex constructs capable of modulating up to 4 native genes from a single vector. Our approach represents a significant step toward minimizing DNA required to assemble CRISPR systems in eukaryotes while enhancing the efficacy (greater repression strength), scale (more sgRNAs), and scope (inducibility) of dCas9-mediated gene regulation.

Small molecule signaling, regulation, and potential applications in cellular therapeutics

Small molecules have many important roles across the tree of life: they regulate processes from metabolism to transcription, they enable signaling within and between species, and they serve as the biochemical building blocks for cells. They also represent valuable phenotypic endpoints that are promising for use as biomarkers of disease states. In the context of engineering cell-based therapeutics, they hold particularly great promise for enabling finer control over the therapeutic cells and allowing them to be responsive to extracellular cues. The natural signaling and regulatory functions of small molecules can be harnessed and rewired to control cell activity and delivery of therapeutic payloads, potentially increasing efficacy while decreasing toxicity. To that end, this review considers small molecule-mediated regulation and signaling in bacteria. We first discuss some of the most prominent applications and aspirations for responsive cell-based therapeutics. We then describe the transport, signaling, and regulation associated with three classes of molecules that may be exploited in the engineering of therapeutic bacteria: amino acids, fatty acids, and quorum-sensing signaling molecules. We also present examples of existing engineering efforts to generate cells that sense and respond to levels of different small molecules. Finally, we discuss future directions for how small molecule-mediated regulation could be harnessed for therapeutic applications, as well as some critical considerations for the ultimate success of such endeavors. WIREs Syst Biol Med 2018, 10:e1405. doi: 10.1002/wsbm.1405 This article is categorized under: Biological Mechanisms > Cell Signaling Biological Mechanisms > Metabolism Translational, Genomic, and Systems Medicine > Therapeutic Methods.

Precise control of lycopene production to enable a fast-responding, minimal-equipment biosensor

Pigmented metabolites have great potential for use in biosensors that target low-resource areas, since sensor output can be interpreted without any equipment. However, full repression of pigment production when undesired is challenging, as even small amounts of enzyme can catalyze the production of large, visible amounts of pigment. The red pigment lycopene could be particularly useful because of its position in the multi-pigment carotenoid pathway, but commonly used inducible promoter systems cannot repress lycopene production. In this paper, we designed a system that could fully repress lycopene production in the absence of an inducer and produce visible lycopene within two hours of induction. We engineered Lac, Ara, and T7 systems to be up to 10 times more repressible, but these improved systems could still not fully repress lycopene. Translational modifications proved much more effective in controlling lycopene. By decreasing the strength of the ribosomal binding sites on the crtEBI genes, we enabled full repression of lycopene and production of visible lycopene in 3-4h of induction. Finally, we added the mevalonate pathway enzymes to increase the rate of lycopene production upon induction and demonstrated that supplementation of metabolic precursors could decrease the time to coloration to about 1.5h. In total, this represents over an order of magnitude reduction in response time compared to the previously reported strategy. The approaches used here demonstrate the disconnect between fluorescent and metabolite reporters, help enable the use of lycopene as a reporter, and are likely generalizable to other systems that require precise control of metabolite production.

Pathway optimization and key enzyme evolution of N-acetylneuraminate biosynthesis using an in vivo aptazyme-based biosensor

N-acetylneuraminate (NeuAc) biosynthesis has drawn much attention owing to its wide applications in many aspects. Previously, we engineered for the first time an artificial NeuAc biosynthetic pathway in Escherichia coli using glucose as sole substrate. However, rigorous requirements for the flux and cofactor balance make subsequent strain improvement rather difficult. In this study, an in vivo NeuAc biosensor was designed and applied for genetic screening the mutant library of NeuAc producer. Its NeuAc responsive manner was demonstrated using sfgfp as a reporter and a Ni²⁺-based selection system was developed to couple the cell growth with in vivo NeuAc concentration. Employing this selection system, the NeuAc biosynthesis pathway was optimized and the key enzyme NeuAc synthase was evolved, which improved the titer by 34% and 23%, respectively. The final strain produced up to 8.31g/L NeuAc in minimal medium using glucose as sole carbon source. This work demonstrated the effectiveness of NeuAc biosensor in genetic screening and great potential in metabolic engineering of other organisms.

Engineering Modular Biosensors to Confer Metabolite-Responsive Regulation of Transcription

Efforts to engineer microbial factories have benefitted from mining biological diversity and high throughput synthesis of novel enzymatic pathways, yet screening and optimizing metabolic pathways remain rate-limiting steps. Metabolite-responsive biosensors may help to address these persistent challenges by enabling the monitoring of metabolite levels in individual cells and metabolite-responsive feedback control. We are currently limited to naturally evolved biosensors, which are insufficient for monitoring many metabolites of interest. Thus, a method for engineering novel biosensors would be powerful, yet we lack a generalizable approach that enables the construction of a wide range of biosensors. As a step toward this goal, we here explore several strategies for converting a metabolite-binding protein into a metabolite-responsive transcriptional regulator. By pairing a modular protein design approach with a library of synthetic promoters and applying robust statistical analyses, we identified strategies for engineering biosensor-regulated bacterial promoters and for achieving design-driven improvements of biosensor performance. We demonstrated the feasibility of this strategy by fusing a programmable DNA binding motif (zinc finger module) with a model ligand binding protein (maltose binding protein), to generate a novel biosensor conferring maltose-regulated gene expression. This systematic investigation provides insights that may guide the development of additional novel biosensors for diverse synthetic biology applications.

Precision metabolic engineering: The design of responsive, selective, and controllable metabolic systems

Metabolic engineering is generally focused on static optimization of cells to maximize production of a desired product, though recently dynamic metabolic engineering has explored how metabolic programs can be varied over time to improve titer. However, these are not the only types of applications where metabolic engineering could make a significant impact. Here, we discuss a new conceptual framework, termed "precision metabolic engineering," involving the design and engineering of systems that make different products in response to different signals. Rather than focusing on maximizing titer, these types of applications typically have three hallmarks: sensing signals that determine the desired metabolic target, completely directing metabolic flux in response to those signals, and producing sharp responses at specific signal thresholds. In this review, we will first discuss and provide examples of precision metabolic engineering. We will then discuss each of these hallmarks and identify which existing metabolic engineering methods can be applied to accomplish those tasks, as well as some of their shortcomings. Ultimately, precise control of metabolic systems has the potential to enable a host of new metabolic engineering and synthetic biology applications for any problem where flexibility of response to an external signal could be useful.