Optimization of fluorogenic RNA-based biosensors using droplet-based microfluidic ultrahigh-throughput screening

FluorMango, an RNA-Based Fluorogenic Biosensor for the Direct and Specific Detection of Fluoride

Nucleic acids are not only essential actors of cell life but also extremely appealing molecular objects in the development of synthetic molecules for biotechnological application, such as biosensors to report on the presence and concentration of a target ligand by emission of a measurable signal. In this work, FluorMango, a fluorogenic ribonucleic acid (RNA)-based biosensor specific for fluoride is introduced. The molecule consists of two RNA aptamer modules, a fluoride-specific sensor derived from the crcB riboswitch which changes its structure upon interaction with the target ion, and the light-up RNA Mango-III that emits fluorescence when complexed with a fluorogen. The two modules are connected by an optimized communication module identified by ultrahigh-throughput screening, which results in extremely high fluorescence of FluorMango in the presence of fluoride, and background fluorescence in its absence. The value and efficiency of this biosensor by direct monitoring of defluorinase activity in living bacterial cells is illustrated, and the use of this new tool in future screening campaigns aiming at discovering new defluorinase activities is discussed.

High-Throughput Development and Optimization of RNA-Based Fluorogenic Biosensors of Small Molecules Using Droplet-Based Microfluidics

Small-molecule sensing is a major issue as they can serve both in fundamental science and as makers of various diseases, contaminations, or even environment pollution. RNA aptamers are single-stranded nucleic acids that can adopt different conformations and specifically recognize a wide range of ligands, making them good candidates to develop biosensors of small molecules. Recently, light-up RNA aptamers have been introduced and used as starting building blocks of RNA-based fluorogenic biosensors. They are typically made of three domains: a reporter domain (a light-up aptamer), connected to a sensor domain (another aptamer) via a communication module. The latter is instrumental as being in charge of information transmission between the sensor and the reporting domains. Here we present an ultrahigh-throughput screening procedure to develop RNA-based fluorogenic biosensors by selecting optimized communication modules through an exhaustive functional exploration of every possible sequence permutation using droplet-based microfluidics and next-generation sequencing.

Cell-Free Production Systems in Droplet Microfluidics

The use of cell-free production systems in droplet microfluidic devices has gained significant interest during the last decade. Encapsulating DNA replication, RNA transcription, and protein expression systems in water-in-oil drops allows for the interrogation of unique molecules and high-throughput screening of libraries of industrial and biomedical interest. Furthermore, the use of such systems in closed compartments enables the evaluation of various properties of novel synthetic or minimal cells. In this chapter, we review the latest advances in the usage of the cell-free macromolecule production toolbox in droplets, with a special emphasis on new on-chip technologies for the amplification, transcription, expression, screening, and directed evolution of biomolecules.

Fluorogenic RNA-Based Biosensor to Sense the Glycolytic Flux in Mammalian Cells

The visualization of metabolic flux in real time requires sensor molecules that transduce variations of metabolite concentrations into an appropriate output signal. In this regard, fluorogenic RNA-based biosensors are promising molecular tools as they fluoresce only upon binding to another molecule. However, to date no such sensor is available that enables the direct observation of key metabolites in mammalian cells. Toward this direction, we selected and characterized an RNA light-up sensor designed to respond to fructose 1,6-bisphosphate and applied it to probe glycolytic flux variation in mammal cells.

Directed Evolution in Drops: Molecular Aspects and Applications

The process of optimizing the properties of biological molecules is paramount for many industrial and medical applications. Directed evolution is a powerful technique for modifying and improving biomolecules such as proteins or nucleic acids (DNA or RNA). Mimicking the mechanism of natural evolution, one can enhance a desired property by applying a suitable selection pressure and sorting improved variants. Droplet-based microfluidic systems offer a high-throughput solution to this approach by helping to overcome the limiting screening steps and allowing the analysis of variants within increasingly complex libraries. Here, we review cases where successful evolution of biomolecules was achieved using droplet-based microfluidics, focusing on the molecular processes involved and the incorporation of microfluidics to the workflow. We highlight the advantages and limitations of these microfluidic systems compared to low-throughput methods and show how the integration of these systems into directed evolution workflows can open new avenues to discover or improve biomolecules according to user-defined conditions.

µIVC-Useq: a microfluidic-assisted high-throughput functionnal screening in tandem with next generation sequencing and artificial neural network to rapidly characterize RNA molecules

The function of an RNA is intimately linked to its three-dimensional structure. X-ray crystallography or NMR allow the fine structural characterization of small RNA (e.g., aptamers) with a precision down to atomic resolution. Yet, these technics are time consuming, laborious and do not inform on mutational robustness and the extent to which a sequence can be modified without altering RNA function, an important set of information to assist RNA engineering. On another hand, thought powerful, in silico predictions still lack the required accuracy. These limitations can be overcome by using high-throughput microfluidic-assisted functional screening technologies, as they allow exploring large mutant libraries in a rapid and cost-effective manner. Among them, we recently introduced the microfluidic-assisted In Vitro Compartmentalization (µIVC), an efficient screening strategy in which reactions are performed in picoliter droplets at rates of several thousand per second. We later improved µIVC efficiency by using in tandem with high throughput sequencing, thought a laborious bioinformatic step was still required at the end of the process. In the present work, we strongly increased the automation level of the pipeline by implementing an artificial neural network enabling unsupervised bioinformatic analysis. We demonstrate the efficiency of this "µIVC-Useq" technology by rapidly identifying a set of sequences readily accepted by a key domain of the light-up RNA aptamer SRB-2. This work not only shed some new light on the way this aptamer can be engineered, but it also allowed us to easily identify new variants with an up-to 10-fold improved performance.

A malachite green light-up aptasensor for the detection of theophylline

Biosensors are of interest for the quantitative detection of small molecules (metabolites, drugs and contaminants for instance). To this end, fluorescence is a widely used technique that is easily associated to aptamers. Light-up aptamers constitute a particular class of oligonucleotides that, specifically induce fluorescence emission when binding to cognate fluorogenic ligands such as malachite green (MG). We engineered a dual aptasensor for theophylline (Th) based on the combination of switching hairpin aptamers specific for MG on the one hand and for Th on the other hand, hence their names: malaswitch (Msw) and theoswitch (Thsw). The two aptaswitches form a loop-loop or kissing Msw-Thsw complex only in the presence of theophylline, allowing binding of MG, subsequently generating a fluorescent signal. The combination of the best Msw and Thsw variants, MswG12 and Thsw19.1, results in a 20-fold fluorescence enhancement of MG at saturating theophylline concentration. This aptasensor discriminates between theophylline and its analogues caffeine and theobromine. Kissing aptaswitches derived from light-up aptamers constitute a novel sensing device.

μIVC-Seq: A Method for Ultrahigh-Throughput Development and Functional Characterization of Small RNAs

For a long time, artificial RNAs have been developed by in vitro selection methodologies like Systematic Evolution of Ligands by EXponential enrichment (SELEX). Yet, even though this technology is extremely powerful to isolate specific and high-affinity binders, it is less suited for the isolation of RNAs optimized for more complex functions such as fluorescence emission or multiple-turnover catalysis. Whereas such RNAs should ideally be developed by screening approaches, conventional microtiter plate assays become rapidly cost-prohibitive. However, the advent of droplet-based microfluidics recently enabled us to devise microfluidic-assisted In Vitro Compartmentalization (μIVC), a strongly miniaturized and highly parallelized screening technology allowing to functionally screen millions of mutants in a single day while using a very low amount of reagent. Used in combination with high-throughput sequencing, the resulting μIVC-seq pipeline described in this chapter now allows rapid and semiautomated screening to be performed at low cost and in an ultrahigh-throughput regime.

Development and Applications of Fluorogen/Light-Up RNA Aptamer Pairs for RNA Detection and More

The central role of RNA in living systems made it highly desirable to have noninvasive and sensitive technologies allowing for imaging the synthesis and the location of these molecules in living cells. This need motivated the development of small pro-fluorescent molecules called "fluorogens" that become fluorescent upon binding to genetically encodable RNAs called "light-up aptamers." Yet, the development of these fluorogen/light-up RNA pairs is a long and thorough process starting with the careful design of the fluorogen and pursued by the selection of a specific and efficient synthetic aptamer. This chapter summarizes the main design and the selection strategies used up to now prior to introducing the main pairs. Then, the vast application potential of these molecules for live-cell RNA imaging and other applications is presented and discussed.

Aptamer-Functionalized Microdevices for Bioanalysis

Aptamers have drawn great attention in the field of biological research and disease diagnosis for the remarkable advantages as recognition elements. They show unique superiority for facile selection, desirable thermal stability, flexible engineering, and low immunogenicity, complementing the use of conventional antibodies. Aptamer-functionalized microdevices offer promising properties for bioanalysis applications because of the compact sizes, minimal reaction volume, high throughput, operational feasibility, and controlled preciseness. In this review, we first introduce the innovative technologies in the selection of aptamers with microdevices and then highlight some advanced applications of aptamer-functionalized microdevices in bioanalysis field for diverse targets. Aptamer-functionalized microfluidic devices, microarrays, and paper-based and other interface-based microdevices are all bioanalysis platforms with huge potential in the near future. Finally, the major challenges of these microdevices applied in bioanalysis are discussed and future perspectives are also envisioned.

Characterizing microfluidic approaches for a fast and efficient reagent exchange in single-molecule studies

Single-molecule experiments usually take place in flow cells. This experimental approach is essential for experiments requiring a liquid environment, but is also useful to allow the exchange of reagents before or during measurements. This is crucial in experiments that need to be triggered by ligands or require a sequential addition of proteins. Home-fabricated flow cells using two glass coverslips and a gasket made of paraffin wax are a widespread approach. The volume of the flow cell can be controlled by modifying the dimensions of the channel while the reagents are introduced using a syringe pump. In this system, high flow rates disturb the biological system, whereas lower flow rates lead to the generation of a reagent gradient in the flow cell. For very precise measurements it is thus desirable to have a very fast exchange of reagents with minimal diffusion. We propose the implementation of multistream laminar microfluidic cells with two inlets and one outlet, which achieve a minimum fluid switching time of 0.25 s. We additionally define a phenomenological expression to predict the boundary switching time for a particular flow cell cross section. Finally, we study the potential applicability of the platform to study kinetics at the single molecule level.

Illuminating Cellular Biochemistry: Fluorogenic Chemogenetic Biosensors for Biological Imaging

Cellular activity is defined by the precise spatiotemporal regulation of various components, such as ions, small molecules, or proteins. Studying cell physiology consequently requires the optical recording of these processes, notably by using fluorescent biosensors. The recent development of various fluorogenic systems greatly expanded the palette of reporters to be included in these sensors design. Fluorogenic reporters consist of a protein or RNA tag that can complex either an endogenous or a synthetic fluorogenic dye (so-called fluorogen). The intrinsic nature of these tags, along with the high tunability of their cognate chromophore provide interesting features such as far-red to near-infrared emission, oxygen independence, or unprecedented color versatility. These engineered photoreceptors, self-labelling proteins, or noncovalent aptamers and protein tags were rapidly identified as promising reporters to observe biological events. This Minireview focuses on the new perspectives they offer to design unique and innovative biosensors, thus pushing the boundaries of cellular imaging.

Engineering Light-Up Aptamers for the Detection of RNA Hairpins through Kissing Interaction

Aptasensors are biosensors that include aptamers for detecting a target of interest. We engineered signaling aptasensors for the detection of RNA hairpins from the previously described malachite green (MG) RNA aptamer. The top part of this imperfect hairpin aptamer was modified in such a way that it can engage loop-loop (so-called kissing) interactions with RNA hairpins displaying partly complementary apical loops. These newly derived oligonucleotides named malaswitches bind their cognate fluorogenic ligand (MG) exclusively when RNA-RNA kissing complexes are formed, whereas MG does not bind to malaswitches alone. Consequently, the formation of the ternary target RNA-malaswitch RNA-MG complex results in fluorescence emission, and malaswitches constitute sensors for detecting RNA hairpins. Malaswitches were designed that specifically detect precursors of microRNAs let7b and miR-206.

Next-Generation Fluorogen-Based Reporters and Biosensors for Advanced Bioimaging

Our ability to observe biochemical events with high spatial and temporal resolution is essential for understanding the functioning of living systems. Intrinsically fluorescent proteins such as the green fluorescent protein (GFP) have revolutionized the way biologists study cells and organisms. The fluorescence toolbox has been recently extended with new fluorescent reporters composed of a genetically encoded tag that binds endogenously present or exogenously applied fluorogenic chromophores (so-called fluorogens) and activates their fluorescence. This review presents the toolbox of fluorogen-based reporters and biosensors available to biologists. Various applications are detailed to illustrate the possible uses and opportunities offered by this new generation of fluorescent probes and sensors for advanced bioimaging.