Assessment of the genotoxic and carcinogenic risks of p-nitrophenol when it is present as an impurity in a drug product

Biodegradation of phenolic pollutants and bioaugmentation strategies: A review of current knowledge and future perspectives

The widespread use of phenolic compounds renders their occurrence in various environmental matrices, posing ecological risks especially the endocrine disruption effects. Biodegradation-based techniques are efficient and cost-effective in degrading phenolic pollutants with less production of secondary pollution. This review focuses on phenol, 4-nonylphenol, 4-nitrophenol, bisphenol A and tetrabromobisphenol A as the representatives, and summarizes the current knowledge and future perspectives of their biodegradation and the enhancement strategy of bioaugmentation. Biodegradation and isolation of degrading microorganisms were mainly investigated under oxic conditions, where phenolic pollutants are typically hydroxylated to 4-hydroxybenzoate or hydroquinone prior to ring opening. Bioaugmentation efficiencies of phenolic pollutants significantly vary under different application conditions (e.g., increased degradation by 10-95% in soil and sediment). To optimize degradation of phenolic pollutants in different matrices, the factors that influence biodegradation capacity of microorganisms and performance of bioaugmentation are discussed. The use of immobilization strategy, indigenous degrading bacteria, and highly competent exogenous bacteria are proposed to facilitate the bioaugmentation process. Further studies are suggested to illustrate 1) biodegradation of phenolic pollutants under anoxic conditions, 2) application of microbial consortia with synergistic effects for phenolic pollutant degradation, and 3) assessment on the uncertain ecological risks associated with bioaugmentation, resulting from changes in degradation pathway of phenolic pollutants and alterations in structure and function of indigenous microbial community.

Occurrence and prioritization of non-volatile substances in recycled PET flakes produced in China

Recycled PET (rPET) is gaining popularity for use in the production of new food contact materials (FCMs) under the context of circular economy. However, the limited information on contaminants in rPET from China and concerns about their potential risk are major obstacles to their use in FCM in China. Fifty-five non-volatile compounds were tentatively identified in 126 batches of hot-washed rPET flakes aimed for food packaging applications in China. Although the 55 substances are not necessarily migratable and may not end up in the contacting media, their presence indicates a need for proper management and control across the value chain. For this reason, the 55 substances prioritized on the basis of level of concerns and in-silico genotoxicity profiler. Among them, dimethoxyethyl phthalate, dibutyl phthalate, bis(2-ethylhexyl) phthalate were classified as level V substances, and Michler's ketone and 4-nitrophenol were both categorized as level V substances and had the genotoxic structure alert, while 2,4,5-trimethylaniline was specified with genotoxic structure alert. The above substances have high priority and may pose a potential risk to human health, therefore special attention should be paid to their migration from rPET. Aside from providing valuable information on non-volatile contaminants present in hot-washed rPET flakes coming from China, this article proposed a prioritization workflow that can be of great help to identify priority substances deserving special attention across the value chain.

Phospholipid-derived Au and Au-Cu suspensions as efficient peroxide and borohydride activators for organic molecules degradation: Performance and sustainable catalytic mechanism

In the contemporary context, executing light-oxidant- and reductant-driven reactions in solution-phase processes remains challenging mainly due to the lack of general tools for understanding the reactive potential of nano-functional catalysts. In this study, dual-active nanometals (Au and Cu doped with Au) capped within soy lecithin (SL), were developed and characterized, combining flexibility with the catalytic advantages and stability of liquid-phase catalysts. The as-synthesized SL-Au (LG) and SL-Au-Cu (LGC) catalysts were efficiently degraded rhodamine B (RB, 100%) in the presence of H2O2 under light irradiation (350 W lamp) at wide pH range (3-7) within 4.5 h and p-nitrophenol (p-NP, >90% degradation at pH 7) in the presence of NaBH4 under normal stirring with slower kinetics (∼72 h). RB degradation followed a pseudo-second-order kinetic model with a higher r2, and p-NP degradation followed first-order kinetics. The active sites embedded within the structural order of SL arrangement displayed elevated catalytic activity, which was further enhanced by the movement of intermediate/excited states and charged elements within the metal suspended in the phospholipid (LG and LGC). The self-regulating tunability of the physicochemical characteristics of these catalysts provides a convenient and generalizable platform for the transformation of modern dual-active (redox) catalysts into dynamic homogeneous equivalents.

Green synthesis trends and potential applications of bimetallic nanoparticles towards the sustainable development goals 2030

The world faces threats that the United Nations has classified into 17 categories with different objectives as solutions for each challenge that are enclosed in the Sustainable Development Goals (SDGs). These actions involved the widespread use of science and technology as pathways to ensure their implementation. In this regard, sustainability science seeks the research community's contribution to addressing sustainable development challenges. Specifically, nanotechnology has been recognized as a key tool to provide disruptive and effective strategies to reach the SDGs. This review proposes the application of bimetallic nanoparticle substances capable of providing possible solutions to achieve target SDG 3: good health and well-being, SDG 6: clean water and sanitation, and SDG 12: responsible consumption and production. Furthermore, the term green nanotechnology is introduced in each section to exemplify how green synthesized bimetallic nanoparticles have been used to resolve each target SDG. This review also outlines the current scenario regarding the utilization of metallic nanomaterials in the market, together with the upscaling challenges and the lack of understanding of the long-term effects and hazards to the environment regarding bimetallic nanoparticles.

Influences of Mg-activation on sugarcane bagasse biochar characteristics and its PNP removing potentials from contaminated water

Biochar as a substitute eco-friendly and low-cost adsorbent is introduced for removing p-nitrophenol (PNP) one of the most important chemical contaminant that recognized as the main metabolite in many pesticides and an intermediate compound in many industries. Physicochemical characteristics of sugarcane bagasse biochar (SCBB) and its Mg-activation (ASCBB) generated at 500 °C for 30 min were investigate. Batch kinetic experiment was conducted (200 mg L-1 PNP) to evaluate sorption efficiency of both tested biochars. To study the reaction behavior of PNP adsorption on ASCBB, solution pH and isotherm experiment of different concentrations and dosages were as investigated. The results show that ASCBB had a higher biochar yield, ash content, pH, molar ratios (H/C and O/C), surface area, pore volume, mean pore diameter, and specific and thick wall structure than SCBB. The efficiency of ASCBB to remove PNP was higher than SCBB which reached 51.98% in the first 1 min., and pH 7 achieved the optimum adsorption. Pseudo-second-order model examination exhibited well fitted to explain the adsorption results depending on R2 value (1.00). The adsorption isotherm results were well described by the Elovich and Freundlich models depending on the R2, qm and n values, which means the formation of a multilayer of PNP on the ASCBB surface through the chemisorption reaction. The calculated qm (144.93 mg g-1) of 1g L-1 was relatively close with experimental value (142.03 mg g-1). The PNP adsorption mechanism on both biochar types was electrostatic attraction, hydrogen bonding, and π-π stacking interactions, which were confirmed by studying the surface reactions before and after adsorption. Overall, the current study provided a successful waste biomass-derived biochar as a conducive alternative eco-sorbent to eliminate p-nitrophenol from wastewater.

Cobalt-based conjugated coordination polymers with tunable dimensions for electrochemical sensing of p-nitrophenol

Using planar π-conjugated 2,5-diamino-1,4-benzenedithiol as organic ligand, Co-based conjugated coordination polymers (CoCCPs) with different morphology were prepared through controlling the injection rate of Co2+. When the injection rate decreases from 1.00 to 0.25 mL min-1, the obtained CoCCPs change from 2D nanosheets to quasi-1D nanorods. It is found that the different-shaped CoCCPs exhibit varying electrochemical sensing performance. The prepared CoCCPs-1 with quasi-1D nanowires and porous network structure possesses larger active area, faster electron transfer and higher accumulation ability. Moreover, the CoCCPs-1 is more active for the oxidation of p-nitrophenol (PNP), and greatly enhances its oxidation signal. Based on the morphology-tuned sensing performance of CoCCPs, a highly-sensitive electrochemical sensor has been developed for PNP, with detection limit of 0.00986 μM (9.86 nM). It was used in the analysis of wastewater samples, and the results is validated by other instrumental method.

Molecularly Imprinted Polymers for Pharmaceutical Impurities: Design and Synthesis Methods

The safety of a medicinal product is determined by its pharmacological and toxicological profile, which depends not only on the active substance's toxicological properties, but also on the impurities it contains. Because impurities are a problem that must be considered to ensure the safety of a drug product, many studies have been conducted regarding the separation or purification of active pharmaceutical ingredients (APIs) and the determination of impurities in APIs and drug products. Several studies have applied molecularly imprinted polymers (MIPs) to separate impurities in active ingredients and as adsorbents in the sample preparation process. This review presents the design of MIPs and the methods used to synthesise MIPs to separate impurities in APIs and drug product samples, the application of MIPs to separate impurities, and a view of future studies involving MIPs to remove impurities from pharmaceutical products. Based on a comparison of the bulk and surface-imprinting polymerisation methods, the MIPs produced by the surface-imprinting polymerisation method have a higher adsorption capacity and faster adsorption kinetics than the MIPs produced by the bulk polymerisation method. However, the application of MIPs in the analysis of APIs and drug products are currently only related to organic compounds. Considering the advantages of MIPs to separate impurities, MIPs for other impurities still need to be developed, including multi-template MIPs for simultaneous separation of multiple impurities.

Incorporation of g-C3N4 nanosheets and CuO nanoparticles on polyester fabric for the dip-catalytic reduction of 4 nitrophenol

In the present work, we present the preparation of a new emerged heterogeneous catalyst (PE/g-C3N4/CuO) by in situ deposition of copper oxide nanoparticles (CuO) over the graphitic carbon nitride (g-C3N4) as the active catalyst and polyester (PE) fabric as the inert support. The synthesized sample (PE/g-C3N4/CuO) "dip catalyst" was studied by using various analytical techniques (Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy and dispersive X-ray spectroscopy (SEM/EDX), and transmission electron microscopy (TEM). The nanocomposite is utilized as heterogeneous catalysts for the 4-nitrophenol reduction in the presence of NaBH4, in aqueous solutions. According to experimental results, PE/g-C3N4/CuO with a surface of 6 cm2 (3 cm × 2 cm) demonstrated the catalyst exhibit excellent catalytic activity with 95% reduction efficiency for only 4 min of reaction and an apparent reaction rate constant (Kapp) of 0.8027 min-1. Further evidence that this catalyst based on prepared PE support can be a good contender for long-lasting chemical catalysis comes from the remarkable stability after 10 repetitions reaction cycles without a noticeably loss in catalytic activity. The novelty of this work consists to fabricate of catalyst based of CuO nanoparticles stabilized with g-C3N4 on the surface of an inert substrate PE, which results in an heterogenous dip-catalyst that can be easily introduced and isolated from the reaction solution with good retention of high catalytic performance in the reduction of 4-nitrophenol.

Sequentially modified carbon felt for enhanced p-nitrophenol biodegradation through direct interspecific electron transfer

The widely applied aromatic nitration in modern industry leads to toxic p-nitrophenol (PNP) in environment. Exploring its efficient degradation routes is of great interests. In this study, a novel four-step sequential modification procedure was developed to increase the specific surface area, functional group, hydrophilicity, and conductivity of carbon felt (CF). The implementation of the modified CF promoted reductive PNP biodegradation, attaining 95.2 ± 0.8% of removal efficiency with less accumulation of highly toxic organic intermediates (e.g., p-aminophenol), compared to carrier-free and CF-packed biosystems. The constructed anaerobic-aerobic process with modified CF in 219-d continuous operation achieved further removal of carbon and nitrogen containing intermediates and partial mineralization of PNP. The modified CF promoted the secretion of extracellular polymeric substances (EPS) and cytochrome c (Cyt c), which were essential components to facilitate direct interspecies electron transfer (DIET). Synergistic relationship was deduced that glucose was converted into volatile fatty acids by fermenters (e.g., Longilinea and Syntrophobacter), which donated electrons to the PNP degraders (e.g., Bacteroidetes_vadinHA17) through DIET channels (CF, Cyt c, EPS) to complete PNP removal. This study proposes a novel strategy using engineered conductive material to enhance the DIET process for efficient and sustainable PNP bioremediation.

Green preparation of silver nanocluster composite AgNCs@CF-g-PAA and its application: 4-NP catalytic reduction and hydrogen production

4-Nitrophenol (4-NP) is a serious organic environmental pollutant. Conversion of 4-nitrophenol to 4-aminophenol (4-AP) by catalytic hydrogenation is an effective solution. In this work, a catalyst (AgNCs@CF-g-PAA) loaded with silver nanoclusters (AgNCs) was prepared by radiation technique. Firstly, the template polyacrylic acid (PAA) was grafted onto the cotton fiber (CF) by radiation grafting technique to obtain a solid template (CF-g-PAA). After that, AgNCs were synthesized in situ on CF-g-PAA by radiation reduction, and the composite material AgNCs@CF-g-PAA was obtained directly. AgNCs@CF-g-PAA has an obvious photoluminescence phenomenon, which is attributed to the stable AgNCs binding to the carboxyl on the PAA molecular chain. Due to the extremely small size of AgNCs, AgNCs@CF-g-PAA has good catalytic characteristics. The prepared AgNCs@CF-g-PAA catalyst has a very high catalytic rate for the hydrogenation of 4-NP. Even at high concentrations of 4-NP, AgNCs@CF-g-PAA can still maintain a high catalytic rate. At the same time, the AgNCs@CF-g-PAA catalyst can also be used to catalyze the rapid hydrolysis of sodium borohydride, which is conducive to hydrogen production. In summary, we have prepared a practical catalyst AgNCs@CF-g-PAA with high catalytic performance based on cheap raw materials and a simple synthesis route, which provides a catalyst candidate for the treatment of water contaminant 4-NP and the production of hydrogen from sodium borohydride.

The mechanism of p-nitrophenol degradation by dissolved organic matter derived from biochar

Recently, p-nitrophenol (PNP), a common organic environmental pollutant, has been reported to be degraded by biochar. Although the degradation mechanism of PNP by biochar has been explored, the role of biochar-derived dissolved organic matter (BDOM) in PNP degradation remains unclear. Two BDOM samples were prepared in this study, and their PNP degradation performance was analyzed. BDOM5 (prepared at 500 °C) exhibited higher PNP degradation ratio than BDOM7 (prepared at 700 °C). The extent of PNP degradation per unit of BDOM5 and BDOM7 reached 9.54 and 4.19 mg/mg, respectively. Gas chromatography-mass spectrometry (GC-MS) analysis showed that both oxidative and reductive processes contributed to the PNP degradation by BDOM. Compared with BDOM7, the higher PNP removal of BDOM5 was due to the higher electron exchange capacity. Furthermore, hydroxyl radicals (OH) played a critical role in the oxidative degradation process of PNP by BDOM. This study sheds light on the phenomenon of PNP degradation by BDOM and these results may be useful for accurately assessing the environmental impact of biochar application.

Nitroso Impurities in Drug Products: An Overview of Risk Assessment, Regulatory Milieu, and Control Strategy

Many nitrosamines have been recognized to be carcinogenic for many decades. Despite the fact that several nitrosamine precursors are frequently used in the manufacturing of pharmaceutical products, their potential presence in pharmaceutical products has previously been overlooked due to a lack of understanding on how they form during the manufacturing process. From the risk assessment, it is clear that nitrosamines or their precursors may be present in any component of the finished dosage form. As a risk mitigation strategy, components with a high potential to form nitrosamine should be avoided. In the absence of suitable alternatives, sufficient measures to maintain nitrosamines below acceptable intake levels must be applied. Excipient manufacturing pathways must be extensively studied in order to identify probable excipient components that may contribute to nitrosamine formation. The manufacturers must not solely rely on pharmacopeial specifications for APIs and excipients, rather, they should also develop and implement additional strategies to control nitrosamine impurities. The formulation can be supplemented with nitrosating inhibitors, such as vitamin C, to stop the generation of nitrosamine. The purpose of this review is to identify key risk factors with regard to nitrosamine formation in pharmaceutical dosage forms and provide an effective control strategy to contain them below acceptable daily intake limits.

Nitrogen and sulfur dual doped porous carbon as metal-free catalyst for oxidative degradation of 4-nitrophenol by persulfate activation

The replacement of metals in catalytic processes is highly demanded to improve sustainability and economic growth. Poor stability and metal leaching are the main drawbacks of metal-based catalytic reactions. This work represented the use of nitrogen and sulfur-co-doped mesoporous carbon material ((N, S)-MPC) as a metal-free catalyst for the degradation of 4-nitrophenol (4-NP) as a priority pollutant announced by the Environmental Protection Agency through the persulfate-based advanced oxidation process. A low amount of (N, S)-MPC catalyst (0.3 g/L) exhibited superior performance for the degradation of 4-NP within 3 h at room temperature and unadjusted pH. The COD removal was calculated to be 76% using (N, S)-MPC catalyst. Interestingly, the degradations kinetics of 4-NP followed the zero-order kinetics with the rate constant of 0.505 min^-1. The radical quenching experiment was accomplished to investigate the activation pathway of degradation. A real sample from an oil and gas company was treated with the (N, S)-MPC catalyst, which showed excellent total decontamination of 61%. The recyclability and stability of the catalyst have been evaluated for three runs. Owing to the obvious benefits such as high efficiency, metal-free nature, and recyclability, the presented catalyst can improve pollutant removal from aqueous media and practical environmental remediation.

Influence of Synthesis Conditions on Physicochemical and Photocatalytic Properties of Ag Containing Nanomaterials

Silver (Ag) containing nanomaterials were successfully prepared by varying synthesis conditions to understand the influence of preparation conditions on the physicochemical and photocatalytic properties of these materials. Different analytical techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), Diffuse reflectance UV-vis spectra (DR UV-vis), X-ray photoelectron spectroscopy (XPS) measurements, and N2-physisorption were used to investigate the physicochemical properties of synthesized Ag containing nanomaterials. The samples (Ag-1 and Ag-2) prepared using AgNO3, NaHCO3, and polyvinylpyrrolidone (PVP) template exhibited pure Ag metal nanorods and nanoparticles; the morphology of Ag metal is influenced by the hydrothermal treatment. The Ag-3 sample prepared without PVP template and calcined at 250 °C showed the presence of a pure Ag2O phase. However, the same sample dried at 50 °C (Ag-4) showed the presence of a pure Ag2CO3 phase. Interestingly, subjecting the sample to hydrothermal treatment (Ag-5) has not resulted in any change in crystal structure, but particle size was increased. All the synthesized Ag containing nanomaterials were used as photocatalysts for p-nitrophenol (p-NP) degradation under visible light irradiation. The Ag-4 sample (pure Ag2CO3 with small crystallite size) exhibited high photocatalytic activity (86% efficiency at pH 10, p-NP concentration of 16 mg L−1, 120 min and catalyst mass of 100 mg) compared to the other synthesized Ag containing nanomaterials. The high photocatalytic activity of the Ag-4 sample is possibly due to the presence of a pure Ag2CO3 crystal structure with nanorod morphology with a low band gap energy of 1.96 eV and relative high surface area.

Cytotoxicity and oxidative stress induced by atmospheric mono-nitrophenols in human lung cells

Nitrophenols (NPs) are hazardous pollutants found in various environmental matrices, including ambient fine particulate matter (PM_2.5), agricultural residues, rainwater, wildfires, and industrial wastes. This study showed for the first time the effect of three pure nitrophenols and their mixture on human lung cells to provide basic understanding of the NP influence on cell elements and processes. We identified NPs in ambient PM_2.5 and secondary organic aerosol (SOA) particles generated from the photooxidation of monocyclic aromatic hydrocarbons in the U.S. EPA smog chamber. We assessed the toxicity of identified NPs and their equimolar mixture in normal bronchial epithelial (BEAS-2B) and alveolar epithelial cancer (A549) lung cell lines. The inhibitory concentration-50 (IC₅₀) values were highest and lowest in BEAS-2B cells treated with 2-nitrophenol (2NP) and 4-nitrophenol (4NP), respectively, at 24 h of exposure. The lactate dehydrogenase (LDH) assay showed that 4NP, the most abundant NP we identified in PM_2.5, was the most cytotoxic NP examined in both cell lines. The annexin-V/fluorescein isothiocyanate (FITC) analysis showed that the populations of late apoptotic/necrotic BEAS-2B and A549 cells exposed to 3NP, 4NP, and NP equimolar mixture increased between 24 and 48 h. Cellular reactive oxygen species (ROS) buildup led to cellular death post exposure to 3NP, 4NP and the NP mixtures, while 2NP induced the lowest ROS buildup. An increased mitochondrial ROS signal following NP exposure occurred only in BEAS-2B cells. The tetramethylrhodamine, methyl ester, perchlorate (TMRM) assay showed that exposed cells exhibited collapse of the mitochondrial membrane potential. TMRM signals decreased significantly only in BEAS-2B cells, and most strongly with 4NP exposures. Our results suggest that acute atmospheric exposures to NPs may be toxic at high concentrations, but not at ambient PM_2.5 concentrations. Further chronic studies with NP and NP-containing PM_2.5 are warranted to assess their contribution to lung pathologies.

Bioremediation of phenolic pollutants by algae - current status and challenges

Industrial production processes, especially petroleum processing, will produce high concentration phenolic wastewater. Traditional wastewater treatment technology is costly and may lead to secondary pollution. In order to avoid the adverse effects of incompletely treated phenolics, more advanced methods are required. Algae bioremediate phenolics through green pathways such as adsorption, bioaccumulation, biodegradation, and photodegradation. At the same time, the natural carbon fixation capacity of algae and its potential to produce high-value products make algal wastewater treatment technology economically feasible. This paper reviews the environmental impact of several types of phenolic pollutants in wastewater and different strategies to improve bioremediation efficiency. This paper focuses on the progress of algae removing phenols by different mechanisms and the potential of algae biomass for further biofuel production. This technology holds great promise, but more research on practical wastewater treatment at an industrial scale is needed in the future.

Sustainable Liquid Chromatographic Determination and Purity Assessment of a Possible Add-on Triple-Action Over-the-counter Pharmaceutical Combination in COVID-19

Nowadays, all researchers are focused on combating the pandemic COVID-19. According to recent statistics, most patients are managed at home. An over-the-counter (OTC) triple action formula containing paracetamol (PAR), aspirin (ASP), and diphenhydramine (DIPH) is widely prescribed for pain, fever and as night-time sleep aid. For COVID-19 patients, this combination is now suggested as part of symptomatic therapy and prophylaxis. In this work, two simple liquid chromatographic approaches were designed for simultaneous determination of PAR, ASP, and DIPH in Excedrin® PM caplets, beside three specified official toxic impurities, namely, p-aminophenol, p-nitrophenol, and salicylic acid. The first method comprised high-performance thin-layer chromatographic separation coupled with densitometric quantification, on silica gel HPTLC 60 F₂₅₄ aluminium sheets as the stationary phase, ethyl acetate–methanol-aqueous ammonium hydroxide (10.0: 2.0: 0.1, by volume) as the developing system and scanning was performed at 210.0 nm. The second one is a high-performance liquid chromatography coupled with diode array detector. Successful separation of the six components was performed on XTerra C₁₈ column with isocratic elution of mobile phase 0.1% triethylamine acidified water: methanol (70:30, v/v) adjusted with o-phosphoric acid to pH 3.0 and methanol (90:10, v/v) with flow rate programming and detection at 210.0 nm. Validation of the proposed methods was performed according to ICH guidelines. Both methods were successfully used for quality control of the cited drugs in their marketed formulation. Moreover, the in-vitro release study was monitored using the proposed HPLC-DAD method. The greenness profile of the proposed methods was assessed and comparatively evaluated through various assessment tools, specifically; the analytical eco-scale system, national environmental method index (NEMI), green analytical procedure index (GAPI) and analytical greenness (AGREE) metric.

Environmental occurrence, toxicity concerns, and remediation of recalcitrant nitroaromatic compounds

Nitroaromatic compounds (NACs) are considered important groups of chemicals mainly produced by human and industrial activities. The large-scale application of these xenobiotics creates contamination of the water and soil environment. Despite applicability, NACs have been caused severe hazardous side effects in animals and human systems like different cancers, anemia, skin irritation, liver damage and mutagenic effects. The effective remediation of the NACs from the environment is a significant concern. Researchers have implemented physicochemical and biological methods for the remediation of NACs from the environment. Most of the applied methods are based on adsorption and degradation approaches. Among these methods, degradation is considered a versatile method for the subsequent removal of NACs due to its exceptional properties like simplicity, easy operation, cost-effectiveness, and availability. Most importantly, the degradation process does not generate hazardous side products and wastes compared to other methods. Hence, the importance of NACs, their remediation, and supreme attributes of the degradation method have encouraged us to review the recent progress and development for the removal of these perilous materials using degradation as a versatile method. Therefore, in this review, (i) NACs, physicochemical properties, and their hazardous side effects on humans and animals are discussed; (ii) Physicochemical methods, microbial, anaerobic bioremediation, mycoremediation, and aerobic degradation approaches for the degradation of NACs were thoroughly vetted; (iii) The possible mechanisms for degradation of NACs were investigated and discussed. (iv) The applied kinetic models for evaluation of the rate of degradation were also assessed and discussed. Finally, (vi) current challenges and future prospects of proposed methods for degradation and removal of NACs were also directed.

Greenness profile assessment of selective liquid chromatographic methods for determination of a quaternary antimigraine combination along with three of their related official impurities

Two selective, sensitive and environmentally safe LC methods were developed and validated for determination of paracetamol, caffeine, ergotamine tartrate and metoclopramide in coformulated antimigraine tablets along with p-aminophenol, p-nitrophenol and theophylline as officially specified impurities. The first is based on high-performance thin-layer chromatography (HPTLC) coupled with densitometric quantitation. Separation was achieved on HPTLC silica gel 60 F₂₅₄ plates as stationary phase using ethyl acetate:aqueous ammonium hydroxide solution:glacial acetic acid (10.0:0.4:0.1, by volume) as a developing system followed by scanning of the separated bands at 210.0 nm. The subsequent method depends on HPLC with diode array detection. The LC separation was accomplished on a Scharlau C₁₈ (250 × 4.6 mm, 5 μm) column using a mixture of 20.0 mm sodium dihydrogen phosphate, pH 3.0, adjusted with o-phosphoric acid and methanol, at a flow rate of 1.3 mL/min in a gradient elution program. The separated peaks were detected at 210.0 nm. The proposed methods have been validated and proven to meet the requirements outlined in the International Council for Harmonisation (ICH) guidelines. The greenness profile evaluation was carried out using three tools, namely, the National Environmental Method Index, the Analytical EcoScale and the Green Analytical Procedure Index tool, and a comparative study was then conducted. Successful application of the developed methods for determination of the cited quaternary mixture in Metograine tablets confirms their suitability regarding the analytical performance and ecological impact in quality control assay and impurity profiling purposes.

Bio-inspired synthesis of palladium nanoparticles fabricated magnetic Fe3O4 nanocomposite over Fritillaria imperialis flower extract as an efficient recyclable catalyst for the reduction of nitroarenes

This current research is based on a bio-inspired procedure for the synthesis of biomolecule functionalized hybrid magnetic nanocomposite with the Fe3O4 NPs at core and Pd NPs at outer shell. The central idea was the initial modification of magnetic NP by the phytochemicals from Fritillaria imperialis flower extract, which was further exploited in the green reduction of Pd2+ ions into Pd NPs, in situ. The flower extract also acted as a capping agent for the obtained Pd/Fe3O4 composite without the need of additional toxic reagents. The as-synthesized Fe3O4@Fritillaria/Pd nanocomposite was methodically characterized over different physicochemical measures like FT-IR, ICP-AES, FESEM, EDX, TEM, XPS and VSM analysis. Thereafter, its catalytic potential was evaluated in the reduction of various nitrobenzenes to arylamines applying hydrazine hydrate as reductant in ethanol/water (1:2) medium under mild conditions. Furthermore, the nanocatalyst was retrieved using a bar magnet and recycled several times without considerable leaching or loss of activity. This green, bio-inspired ligand-free protocol has remarkable advantages like environmental friendliness, high yields, easy workup and reusability of the catalyst.

Ultrasound assisted synthesis of Pd NPs decorated chitosan-starch functionalized Fe3O4 nanocomposite catalyst towards Suzuki-Miyaura coupling and reduction of 4-nitrophenol

In recent days the nanomagnetic biocomposites have been evolved as sustainable green catalysts. In that context, we are prompted to design and synthesize a novel Pd NP adorned chitosan-starch dual biopolymer encapsulated core-shell type magnetic nanocomposite (Fe₃O₄@CS-Starch/Pd) in an eco-friendly pathway applying ultrasound irradiations. The morphological and physicochemical features of the material were determined using several advanced techniques like FT-IR, FESEM, HRTEM, EDX, atomic mapping, VSM, XRD and ICP-OES. Catalytic efficiency of the material was investigated in the ultrasound assisted classical Suzuki-Miyaura coupling towards the synthesis of diverse range of biaryl derivatives and in the catalytic reduction of 4-Nitrophenol.In both the protocols the catalyst exhibited excellent performances. Sonication had a significant role in enhancing the catalytic performances in both the reactions as compared to conventional heating. Due to super-paramagnetism, the catalyst was easily magnetically isolable and reused in 11 cycles without considerable leaching and change in reactivity.

Fabrication of covalent organic frameworks and its selective extraction of fluoronitrobenzenes from environmental samples

In this study, porous covalent organic frameworks (COFs, named as COFs-SWMU) were synthesized for the first time via a facile approach by using 4,4',4''-methylidynetri-anilin and 2,5-dihydroxy-1,4-benzenedicarboxaldehyde as precursors under ambient temperature. The COFs-SWMU were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy, thermogravimetric analysis, etc. The COFs-SWMU exhibited a relatively high specific surface area and desirable thermal stability. The adsorption performance of COFs-SWMU towards fluoronitrobenzenes (FNBs, including 1-fluoro-2-nitrobenzene, 1-fluoro-3-nitrobenzene, 1-fluoro-4-nitrobenzene, 2,4-difluoronitrobenzene, 3,4-difluoronitrobenzene, and 3,4-dinitrofluorobenzene) was investigated on the basis of adsorption capacity and partition coefficient (PC). The adsorption kinetics and isotherm of COFs-SWMU for FNBs were studied in detail. Further, a simple, fast and sensitive method which combined COFs-SWMU based extraction with high-performance liquid chromatography-diode array detection, was proposed for the analysis of FNBs in environmental samples. Desirable linearity (R²>0.9998) in the range of 0.1-100 μg•mL^-1, low limits of detection (LODs; 0.1‒0.15 μg•mL^‒1), low limits of quantitation (LOQs; 0.28‒0.40 μg•mL^‒1), and desirable precision (RSDs, 0.24-2.83% for intraday and 1.13-6.92% for interday) are obtained. Finally, the COFs-SWMU were applied to the effective extraction of FNBs from environmental samples, and desirable recovery results were obtained.

Metal-Organic Framework (MOF)-Derived Electron-Transfer Enhanced Homogeneous PdO-Rich Co3 O4 as a Highly Efficient Bifunctional Catalyst for Sodium Borohydride Hydrolysis and 4-Nitrophenol Reduction

Developing a bifunctional catalyst with low cost and high catalytic performance in NaBH₄ hydrolysis for H₂ generation and selective reduction of nitroaromatics will make a significant impact in the field of sustainable energy and water purification. Herein, a low-loading homogeneously dispersed Pd oxide-rich Co₃ O₄ polyhedral catalyst (PdO-Co₃ O₄ ) with concave structure is reported by using a metal-organic framework (MOF)-templated synthesis method. The results show that the PdO-Co₃ O₄ catalyst has an exceptional turnover frequency (3325.6 mol_H2  min^-1  mol_Pd ^-1 ), low activation energy (43.2 kJ mol^-1 ), and reasonable reusability in catalytic H₂ generation from NaBH₄ hydrolysis. Moreover, the optimized catalyst also shows excellent catalytic performance in the NaBH₄ selective reduction of 4-nitrophenol to 4-aminiphenol with a high first-order reaction rate of approximately 1.31 min^-1 . These excellent catalytic properties are mainly ascribed to the porous concave structure, monodispersed Pd oxide, as well as the unique synergy between PdO and Co₃ O₄ species, which result in a large specific surface area, high conductivity, and fast solute transport and gas emissions.

Fly ash supported Pd-Ag bimetallic nanoparticles exhibiting a synergistic catalytic effect for the reduction of nitrophenol

Coal fly ash (FA) supported Pd-Ag bimetallic nanoparticles (FA-Pd-Ag) were prepared by reducing Pd(II) and Ag(I) salts together onto the dispersed solid support in aqueous medium. Electron microscope analysis (FE-SEM, HRTEM) in combination with elemental mapping (EDS) suggests that the nanoparticles are well dispersed on fly ash with an average diameter of 6-8 nm. The powder XRD analysis indicates that alloying of the interface occurs between Pd and Ag nanoparticles in FA-Pd-Ag, while XPS reveals that charge transfer takes place between the Pd and Ag moieties that come into contact with each other. The FA-Pd-Ag in aqueous NaBH4 solution exhibits an efficient catalytic reduction of 4-nitrophenol into 4-aminophenol and follows pseudo-first-order reaction kinetics (kPd-Ag = 0.7176 min-1). The higher rate constant for FA-Pd-Ag compared to that for their monometallic analogues (FA-Pd (kPd = 0.5449 min-1)) and (FA-Ag (kAg = 0.5572 min-1)) as well as their physical mixture ((FA-Pd + FA-Ag) (kPd+Ag = 0.4075 min-1)) suggests the synergistic catalytic effect of the bimetallic system. Moreover, the present bimetallic nanocatalyst exhibits the highest normalized rate constant (KPd-Ag ≈ 51 100 min-1 mmol-1) compared to the reported bimetallic Pd-Ag nanocatalysts.

Theoretical insight into the degradation of p-nitrophenol by OH radicals synergized with other active oxidants in aqueous solution

The degradation of p-nitrophenol (p-NP) based on OH radicals (HO^∙), HO₂ radicals (HO₂^∙) and O₂ in aqueous solution was investigated using theoretical computational methods. The complete degradation mechanisms of reaction between p-NP and HO^∙ were explored by density functional theory (DFT) methods. The 4-nitrophenoxy radicals and 1,2-dihydroxy-4-nitrocylohexadienyl radicals are confirmed to be major intermediates of the HO^∙-initiated reactions in aqueous phase, which consistent with experimental results. The chemical structures of some products (2,4-dihydroxycyclohexa-2,4-dien-1-one and 4-nitrocyclohexa-3,5-diene-1,2-dione) which were not identified in the experiment are determined. New favorable formation channels for some intermediates were found. The primary reactions initiated by HO^∙ or HO₂^∙ with p-NP reveals that HO^∙-initiated degradation is the dominant reaction. HO₂^∙ and O₂ can enhance the degradation extent of p-NP in further reactions. Rate constants of the elementary reactions and overall rate constants were calculated. In addition, the HO^∙-initiated primary reactions in a water box of 500 water molecules were studied using Monte Carlo simulation. All the OH-addition reactions are barrierless and highly feasible. The observed dynamic reaction process is similar to the DFT calculation prediction. Furthermore, the eco-toxicity evaluation shows that important products are harmless or harmful to aquatic organisms, and are much less toxic than p-NP.

4-nitrophenol exposure in T24 human bladder cancer cells promotes proliferation, motilities, and epithelial-to-mesenchymal transition

Although health hazards of 4-nitrophenol (PNP) exposure have been reported, the adverse effects of PNP exposure on cancer biological features are still unknown. We investigated the effects of administration of PNP in T24 human bladder cancer cells. The results showed that PNP exposure promoted cellular proliferation, migration and invasion, inhibited adhesion and apoptosis in vitro. Using quantitative real-time PCR, we found that (1) the mRNA expression levels of cell-cycle regulators PCNA, cyclin D1 and COX-2 were increased in PNP-treated cells compared to controls, however, that of pro-apoptotic gene Bax was decreased; (2) the expression level of EMT-associated gene E-cadherin was decreased in PNP-treated cells, whereas those of N-cadherin, vimentin, snail, and slug were increased; (3) the expression levels of cancer-promoting genes HIF-1, IL-1β, VEGFα and K-Ras were enhanced, but those of tumor suppressors p53, PTEN and BRCA were decreased. There was a positive association between PNP exposure times and the promotion effects. Finally, we found that the expression level of PPARγ (γ1 isoform) was increased in PNP-treated T24 cells. GW9662, a specific PPARγ antagonist, attenuated PNP-induced cell migration and invasion. These findings indicate that PNP exposure may promote bladder cancer growth and progression involving PPARγ signaling. PPARγ is a potential target for development of novel intervention study on environment pollution. Environ. Mol. Mutagen. 61:316-328, 2020. © 2019 Wiley Periodicals, Inc.

Facile assembly of 2D α-zirconium phosphate supported silver nanoparticles: superior and recyclable catalysis

A novel, efficient and durable two-dimensional ZrP@PDA/Ag nanocatalyst for the reduction of 4-nitrophenol.

In vitro effects of PNP and PNMC on apoptosis and proliferation in the hen ovarian stroma and prehierarchal follicles

This study aimed to examine the mRNA expression, activity, and immunolocalisation of apoptosis/proliferation regulating factors following in vitro exposure of the stroma, white (WFs), and yellowish (YFs) follicles of the chicken ovary to 4-nitrophenol (PNP) or 3-methyl-4-nitrophenol (PNMC). PNMC increased the mRNA expression of caspase-3, -8, Apaf-1, and cytochrome c in the ovarian stroma. The activity of caspase-3, -8, and -9 decreased in WFs in both nitrophenol-treated groups. PNP reduced the number of caspase-3-positive cells in the stromal connective tissue (CT) and the theca interna and externa layers of WFs. In the stroma, the proliferating index decreased in the wall of primary follicles in both nitrophenol-treated groups, however, in the CT, the effect of PNMC was opposite. In the theca interna of WFs, PNP diminished the proliferating index. These results suggest that nitrophenols might impact the development of chicken ovarian follicles by affecting cell death and proliferation.

Integrating bioassays, chemical analysis and in silico techniques to identify genotoxicants in surface water

Identification of hazardous compounds, as the first step of water protection and regulation, is still challenged by the difficulty to establish a linkage between toxic effects and suspected contaminants. Genotoxic compounds are one type of highly relevant toxicants in surface water, which may attack the DNA and lead to cancer in individual organism, or even damaged germ cells to be passed on to future generations. Thus, the establishment of a linkage between genotoxic effects and genotoxicant is important for environmental toxicologists and chemists. For this purpose, in the present study in silico methods were integrated with bioassays, chemical analysis and literature information to identify genotoxicants in surface water. Large volume water samples from 22 sampling sites of the Danube were collected and subjected to biological and chemical analysis. Samples from the most toxic sites (JDS32, JDS44 and JDS63) induced significant genotoxic effects in the micronucleus assay, and two of them caused mutagenicity in the Ames fluctuation assay. Chemical analysis showed that 68 chemicals were detected in these most toxic samples. Literature findings and in silico techniques using the OECD QSAR Toolbox and the ChemProp software package revealed genotoxic potentials for 29 compounds out of 68 targeted chemicals. To confirm the integrative technical data, the micronucleus assay and the Ames fluctuation assay were applied with artificial mixtures of those compounds and the raw water sample extracts. The results showed that 18 chemicals explained 48.5% of the genotoxicity in the micronucleus assay. This study highlights the capability of in silico techniques in linking adverse biological effect to suspicious hazardous compounds for the identification of toxicity drivers, and demonstrates the genotoxic potential of pollutants in the Danube.

Atomic-scale engineering of MOF array confined Au nanoclusters for enhanced heterogeneous catalysis

A surface-engineered heterogeneous catalyst with a controllable catalytic interface is the most straightforward approach for boosting catalytic activity. However, changing the surface structure of nanocrystals and ensuring the exposure of active sites still face challenges. In this work, a three-dimensional self-supported catalyst with ultrathin Au nanoclusters encapsulated in Cu-doped ZIF-8 nanorod arrays on Ni foam (AuNC@ZIF-8(Cu) NRAs) is synthesized by a bottom-up strategy. This catalyst exhibits high catalytic activity with a 98% conversion of 4-nitrophenol to 4-aminophenol within 6 min. Meanwhile, it also has superior catalytic activity for other nitrobenzene compounds, such as 3-nitrophenol, 2-nitrophenol and p-nitroaniline. Furthermore, after 10 cycles, the catalytic performance and morphology of the catalyst have no obvious change. The excellent catalytic performance and stability of AuNC@ZIF-8(Cu) NRAs are attributed to the synergistic effect of ZIF-8(Cu) and AuNC. The doping of Cu in the ZIF-8 framework effectively alters the superficial electronic structure of encapsulated Au nanoclusters, which can dramatically promote the formation of gold hydride intermediates. The confinement effect of the porous ZIF-8 framework makes the AuNC active sites more stable and accessible to substrates. This method can be used to alter the activity of the catalyst by regulating the metal ion coordination of MOFs to influence the surface properties of encapsulated AuNC and opens the door to the rational design of new catalysts.