Evidence from pharmacology and pathophysiology suggests that chemicals with dissimilar mechanisms of action could be of bigger concern in the toxicological risk assessment of chemical mixtures than chemicals with a similar mechanism of action

Risk assessment of the asthma-induction potential of substances in spray products for car cabin detailing - based on EU's Chemical Agents Directive, using harmonised classifications and quantitative structure-activity relationship (QSAR)

Exposure to spray-formulated products for car cabin detailing is a potential risk for asthma induction. With a focus on the asthma-related endpoints sensitisation and irritation of the lungs, we performed an occupational risk assessment based on requirements in the EU Chemical Agents Directive. We identified 71 such spray products available in Denmark. We identified ingredient substances in safety data sheets and screened for harmonised classifications of respiratory sensitisation and airway irritation. For respiratory sensitisation, we also applied quantitative structure-activity relationship (QSAR). We modelled the exposure during 15 min of work inside a car cabin, and determined the risk ratio of the products by further applying occupational exposure limits - mainly derived no-effect levels (DNELs) from the European Chemicals Agency (ECHA) set on respiratory irritation. Four substances had a harmonised classification for respiratory irritation (bronopol, 2-phenoxyethanol, 2-methoxypropanol, and butan-1-ol). Seven substances were positive in the QSAR model for respiratory sensitisation (monoethanolamine, bronopol, glycerol, methyl salicylate, benzoic acid, ammonium benzoate, and sodium benzoate). Two vinyl treatment products had a risk ratio > 1 based on the level of sodium benzoate and its DNEL set on respiratory irritation. Two products had risk ratios of 0.69 and 0.73, respectively, based on 2-methyl-2 H-isothiazol-3-one and its acute DNEL set on respiratory irritation. In conclusion, 10 substances that may pose a risk for asthma induction were identified in the products. Two of the 71 products had a risk ratio > 1, meaning they may pose an asthma-induction risk in the modelled exposure scenario and using respiratory irritation DNELs from ECHA.

Toxicity dose descriptors from animal inhalation studies of 13 nanomaterials and their bulk and ionic counterparts and variation with primary particle characteristics

This study collects toxicity data from animal inhalation studies of some nanomaterials and their bulk and ionic counterparts. To allow potential grouping and interpretations, we retrieved the primary physicochemical and exposure data to the extent possible for each of the materials. Reviewed materials are compounds (mainly elements, oxides and salts) of carbon (carbon black, carbon nanotubes, and graphene), silver, cerium, cobalt, copper, iron, nickel, silicium (amorphous silica and quartz), titanium (titanium dioxide), and zinc (chemical symbols: Ag, C, Ce, Co, Cu, Fe, Ni, Si, Ti, TiO₂, and Zn). Collected endpoints are: a) pulmonary inflammation, measured as neutrophils in bronchoalveolar lavage (BAL) fluid at 0-24 hours after last exposure; and b) genotoxicity/carcinogenicity. We present the dose descriptors no-observed-adverse-effect concentrations (NOAECs) and lowest-observed-adverse-effect concentrations (LOAECs) for 88 nanomaterial investigations in data-library and graph formats. We also calculate 'the value where 25% of exposed animals develop tumors' (T25) for carcinogenicity studies. We describe how the data may be used for hazard assessment of the materials using carbon black as an example. The collected data also enable hazard comparison between different materials. An important observation for poorly soluble particles is that the NOAEC for neutrophil numbers in general lies around 1 to 2 mg/m³. We further discuss why some materials' dose descriptors deviate from this level, likely reflecting the effects of the ionic form and effects of the fiber-shape. Finally, we discuss that long-term studies, in general, provide the lowest dose descriptors, and dose descriptors are positively correlated with particle size for near-spherical materials.

Genotoxicity in the absence of inflammation after tungsten inhalation in mice

Tungsten is used in several applications and human exposure may occur. To assess its pulmonary toxicity, we exposed male mice to nose-only inhalation of tungsten particles at 9, 23 or 132 mg/m³ (Low, Mid and High exposure) (45 min/day, 5 days/week for 2 weeks). Increased genotoxicity (assessed by comet assay) was seen in bronchoalveolar (BAL) fluid cells at Low and High exposure. We measured acellular ROS production, and cannot exclude that ROS contributed to the observed genotoxicity. We saw no effects on body weight gain, pulmonary inflammation, lactate dehydrogenase or protein in BAL fluid, pathology of liver or kidney, or on sperm counts. In conclusion, tungsten showed non-dose dependent genotoxicity in the absence of inflammation and therefore interpreted to be primary genotoxicity. Based on genotoxicity, a Lowest Observed Adverse Effect Concentration (LOAEC) could be set at 9 mg/m³. It was not possible to establish a No Adverse Effect Concentration (NOAEC).

Identification of substances with a carcinogenic potential in spray-formulated engine/brake cleaners and lubricating products, available in the European Union (EU) - based on IARC and EU-harmonised classifications and QSAR predictions

Spray-formulated engine/brake cleaners and lubricating agents are widely used to maintain machines. The occupational exposure to their aerosols is evident. To assess the carcinogenic potential of these products, we identified such products available in the European Union (EU). We built a database with CAS numbers of 1) mono-constituent substances, and 2) multi-constituent-substances, and unknown-or-variable-composition,-complex-reaction-products-and-biological-materials (multi-constituent/UVCBs). The compositions of multi-constituent/UVCBs were unravelled with European Chemicals Agency (ECHA) registration dossiers. To identify carcinogenic potentials, we searched for 1) International Agency for Research on Cancer (IARC) classification; 2) Harmonised classifications in Annex VI to the EU classification, labelling and packaging (CLP) Regulation; and 3) whether they had a Danish Environmental Protection Agency advisory CLP self-classification based on quantitative structure-activity relationships (QSARs) for genotoxicity and carcinogenicity in the Danish (Q)SAR Database. In 82 products, we identified 332 mono-constituent substances and 44 multi-constituent/UVCBs. Six substances were either IARC 1 or 2B classified. Twelve mono-constituent substances and 22 multi-constituent/UVCBs had harmonised classifications as Carcinogenic Category 1A, 1B or 2, while nine substances fulfilled the QSAR-based advisory self-classification algorithms for mutagenicity or carcinogenicity. At the product level, 39 products contained substances of carcinogenic concern by either IARC, harmonised classification or QSAR. We conclude that in the investigated EU marketed spray-formulated engine/brake cleaners and lubricants, 24 of 332 mono-constituent substances and 28 of 44 multi-constituent/UVCBs had a carcinogenic potential. At the product level, 39 of 82 contained substances with an identified carcinogenic potential. Regulators and manufacturers can use this determination of carcinogenic potential to decrease occupational risk.

Risk assessment of consumer spray products using in vitro lung surfactant function inhibition, exposure modelling and chemical analysis

Consumer spray products release aerosols that can potentially be inhaled and reach the deep parts of the lungs. A thin layer of liquid, containing a mixture of proteins and lipids known as lung surfactant, coats the alveoli. Inhibition of lung surfactant function can lead to acute loss of lung function. We focused on two groups of spray products; 8 cleaning and 13 impregnation products, and in the context of risk assessment, used an in vitro method for assessing inhibition of lung surfactant function. Original spray-cans were used to generate aerosols to measure aerodynamic particle size distribution. We recreated a real-life exposure scenario to estimate the alveolar deposited dose. Most impregnation products inhibited lung surfactant function at the lowest aerosolization rate, whereas only two cleaning products inhibited function at the highest rates. We used inhibitory dose and estimated alveolar deposition to calculate the margin of safety (MoS). The MoS for the inhibitory products was ≤1 for the impregnation products, while much larger for the cleaning products (>880). This risk assessment focused on the risk of lung surfactant function disruption and provides knowledge on an endpoint of lung toxicity that is not investigated by the currently available OECD test guidelines.

Asthma-inducing potential of 28 substances in spray cleaning products-Assessed by quantitative structure activity relationship (QSAR) testing and literature review

Exposure to spray cleaning products constitutes a potential risk for asthma induction. We set out to review whether substances in such products are potential inducers of asthma. We identified 101 spray cleaning products for professional use. Twenty‐eight of their chemical substances were selected. We based the selection on (a) positive prediction for respiratory sensitisation in humans based on quantitative structure activity relationship (QSAR) in the Danish (Q)SAR Database, (b) positive QSAR prediction for severe skin irritation in rabbits and (c) knowledge on the substances' physico‐chemical characteristics and toxicity. Combining the findings in the literature and QSAR predictions, we could group substances into four classes: (1) some indication in humans for asthma induction: chloramine, benzalkonium chloride; (2) some indication in animals for asthma induction: ethylenediaminetetraacetic acid (EDTA), citric acid; (3) equivocal data: hypochlorite; (4) few or lacking data: nitriloacetic acid, monoethanolamine, 2‐(2‐aminoethoxy)ethanol, 2‐diethylaminoethanol, alkyldimethylamin oxide, 1‐aminopropan‐2‐ol, methylisothiazolinone, benzisothiazolinone and chlormethylisothiazolinone; three specific sulphonates and sulfamic acid, salicylic acid and its analogue sodium benzoate, propane‐1,2‐diol, glycerol, propylidynetrimethanol, lactic acid, disodium malate, morpholine, bronopol and benzyl alcohol. In conclusion, we identified an asthma induction potential for some of the substances. In addition, we identified major knowledge gaps for most substances. Thus, more data are needed to feed into a strategy of safe‐by‐design, where substances with potential for induction of asthma are avoided in future (spray) cleaning products. Moreover, we suggest that QSAR predictions can serve to prioritise substances that need further testing in various areas of toxicology.

We reviewed whether substances in spray cleaning products constitute a potential risk for asthma induction. For this, we identified 101 spray cleaning products for professional use and prioritised their ingredient substances by use of quantitative structure activity relationship (QSAR). We provide a review of 28 selected substances: we give conclusions on their asthma induction potential, as well as a discussion on the use of QSAR for prioritisation of substances, and the major knowledge gaps we encountered.

Identification of chemical mixtures to which women are exposed through the diet: Results from the French E3N cohort

Due to the large number of chemical food contaminants, consumers are exposed simultaneously to a wide range of chemicals which can interact and have a negative impact on health. Nevertheless, due to the multitude of possible chemical combinations it is unrealistic to test all combined toxicological effects. It is therefore essential to identify the most relevant mixtures to which the population is exposed through the diet and investigate their impact on heath. The present study aims to identify and describe the main chemical mixtures to which women enrolled in the E3N study, a large French prospective cohort, are chronically exposed through the diet. 74522 women who had answered a validated semi-quantitative food frequency questionnaire in 1993, were included in the present study. Dietary exposure to chemical contaminates was estimated based on the food contamination measured in 186 core food in France collected between 2007 and 2009 by the French agency for food, environment and occupational health, and safety (ANSES) in the framework of the second French total diet study (2TDS). The sparse non-negative matrix under-approximation (SNMU) was used to identify mixtures of chemical substances. A k-means clustering classification of the whole study population was then performed to define clusters with similar co-exposure profiles. Overall, 8 mixtures which explained 83% of the total variance, were retained. The first mixture, entitled "Minerals, inorganic contaminants, and furans", explained the highest proportion of the total variance (38%), and was correlated in particular with the consumption of "Offal" (rho = 0.22), "Vegetables except roots" (rho = 0.20), and "Eggs" (rho = 0.19). The other seven mixtures explained between 17% and 1% of the variance. Finally, 5 clusters were identified based on the adherence to the 8 mixtures. This study, being the largest ever conducted to identify dietary exposure to chemical mixtures, represents a concrete attempt to prioritize mixtures for which it is essential to investigate combined health effects based on exposure.

Pulmonary toxicity of synthetic amorphous silica - effects of porosity and copper oxide doping

Materials can be modified for improved functionality. Our aim was to test whether pulmonary toxicity of silica nanomaterials is increased by the introduction of: a) porosity; and b) surface doping with CuO; and whether c) these modifications act synergistically. Mice were exposed by intratracheal instillation and for some doses also oropharyngeal aspiration to: 1) solid silica 100 nm; 2) porous silica 100 nm; 3) porous silica 100 nm with CuO doping; 4) solid silica 300 nm; 5) porous silica 300 nm; 6) solid silica 300 nm with CuO doping; 7) porous silica 300 nm with CuO doping; 8) CuO nanoparticles 9.8 nm; or 9) carbon black Printex 90 as benchmark. Based on a pilot study, dose levels were between 0.5 and 162 µg/mouse (0.2 and 8.1 mg/kg bw). Endpoints included pulmonary inflammation (neutrophil numbers in bronchoalveolar fluid), acute phase response, histopathology, and genotoxicity assessed by the comet assay, micronucleus test, and the gamma-H2AX assay. The porous silica materials induced greater pulmonary inflammation than their solid counterparts. A similar pattern was seen for acute phase response induction and histologic changes. This could be explained by a higher specific surface area per mass unit for the most toxic particles. CuO doping further increased the acute phase response normalized according to the deposited surface area. We identified no consistent evidence of synergism between surface area and CuO doping. In conclusion, porosity and CuO doping each increased the toxicity of silica nanomaterials and there was no indication of synergy when the modifications co-occurred.

An Overview of Literature Topics Related to Current Concepts, Methods, Tools, and Applications for Cumulative Risk Assessment (2007-2016)

Cumulative risk assessments (CRAs) address combined risks from exposures to multiple chemical and nonchemical stressors and may focus on vulnerable communities or populations. Significant contributions have been made to the development of concepts, methods, and applications for CRA over the past decade. Work in both human health and ecological cumulative risk has advanced in two different contexts. The first context is the effects of chemical mixtures that share common modes of action, or that cause common adverse outcomes. In this context two primary models are used for predicting mixture effects, dose addition or response addition. The second context is evaluating the combined effects of chemical and nonchemical (e.g., radiation, biological, nutritional, economic, psychological, habitat alteration, land-use change, global climate change, and natural disasters) stressors. CRA can be adapted to address risk in many contexts, and this adaptability is reflected in the range in disciplinary perspectives in the published literature. This article presents the results of a literature search and discusses a range of selected work with the intention to give a broad overview of relevant topics and provide a starting point for researchers interested in CRA applications.

Regulating chemicals: law, science, and the unbearable burdens of regulation

The challenges of regulating industrial chemicals remain unresolved in the United States. The Toxic Substances Control Act (TSCA) of 1976 was the first legislation to extend coverage to the regulation of industrial chemicals, both existing and newly registered. However, decisions related to both law and science that were made in passing this law inevitably rendered it ineffectual. Attempts to fix these shortcomings have not been successful. In light of the European Union's passage of innovative principles and requirements for chemical regulation, it is no longer possible to deny the opportunity and need for reform in US law and practice.

In vitro screening for population variability in toxicity of pesticide-containing mixtures

Population-based human in vitro models offer exceptional opportunities for evaluating the potential hazard and mode of action of chemicals, as well as variability in responses to toxic insults among individuals. This study was designed to test the hypothesis that comparative population genomics with efficient in vitro experimental design can be used for evaluation of the potential for hazard, mode of action, and the extent of population variability in responses to chemical mixtures. We selected 146 lymphoblast cell lines from 4 ancestrally and geographically diverse human populations based on the availability of genome sequence and basal RNA-seq data. Cells were exposed to two pesticide mixtures - an environmental surface water sample comprised primarily of organochlorine pesticides and a laboratory-prepared mixture of 36 currently used pesticides - in concentration response and evaluated for cytotoxicity. On average, the two mixtures exhibited a similar range of in vitro cytotoxicity and showed considerable inter-individual variability across screened cell lines. However, when in vitro-to-in vivo extrapolation (IVIVE) coupled with reverse dosimetry was employed to convert the in vitro cytotoxic concentrations to oral equivalent doses and compared to the upper bound of predicted human exposure, we found that a nominally more cytotoxic chlorinated pesticide mixture is expected to have greater margin of safety (more than 5 orders of magnitude) as compared to the current use pesticide mixture (less than 2 orders of magnitude) due primarily to differences in exposure predictions. Multivariate genome-wide association mapping revealed an association between the toxicity of current use pesticide mixture and a polymorphism in rs1947825 in C17orf54. We conclude that a combination of in vitro human population-based cytotoxicity screening followed by dosimetric adjustment and comparative population genomics analyses enables quantitative evaluation of human health hazard from complex environmental mixtures. Additionally, such an approach yields testable hypotheses regarding potential toxicity mechanisms.