In vitro skin penetration of bronidox, bronopol and formaldehyde from cosmetics

Fluorimetric determination of aqueous formaldehyde employing heating and ultrasound-assisted approach through its derivatization with a ß-diketone-nickel(2+) complex immobilized in a PMMA flow cell

Formaldehyde (FA) is a highly toxic substance present in many matrices, including freshwater as well as found in natural mechanisms such as rainfall and combustion of organic matter. Consumption of water contaminated with high levels of FA can cause severe short-term or long-term health problems. Due to these health risks, procedures are necessary to determine and quantify FA in aqua sources This paper reports on a study of fluorimetric determination of FA using a nickel(2 + )-diketonate coordination compound immobilized as a solid precursor. The compound was characterized by electronic absorption, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetry (TG), optical microscopy (OM), and scanner electron microscopy (SEM). The methodology was based on the reaction of the synthesized compound with an ammoniacal buffer generating a selective reagent for formaldehyde: fluoral-P. The product of the reaction generates 3,5-diacetyl-1,4-dihydrolutidine (DDL), which is responsible for the fluorescence of the system. Several parameters such as temperature, duration of heating time, and dilution effect with the best effects were studied to carry out FA determination. Under the optimum experimental conditions, a linear response ranging from 1.0 to 10.0 mg/L FA (R = 0.997 and n = 10), and a detection (3σ criterion) and quantification (10 σ criterion) limit estimated at 0.129 and 0.389 mg/L, respectively were achieved. The FA analysis was able to be conducted in 05 min with a relative standard deviation estimated at 1.10 %.

A rapid method for detecting bronopol in fresh fish, shrimp, crab, and shellfish samples using liquid chromatography-tandem mass spectrometry

Fish farming plays a vital role in providing food, nutrition, and employment globally. However, this industry faces security challenges, necessitating the use of fungicides and preservatives, such as bronopol, to increase product yields. Bronopol (2‑bromo-2-nitropropan-1,3-diol; CAS:52-51-7) is widely used in various fields, including food production, cosmetics, and, more recently, aquaculture. Currently, there is a limited number of techniques available for detecting bronopol in aquaculture products. This is primarily due to bronopol's instability, susceptibility to degradation, and tendency to form precipitates that pose challenges in extraction from aquaculture products. For this issue, this study presents a comprehensive method for detecting bronopol content in aquaculture tissues using liquid chromatography-tandem mass spectrometry (LC‒MS/MS). The methodology was optimized, involving extraction with Cu-Zn precipitant, cleanup using a small HLB column, separation on a T3 column, and gradient elution with water and acetonitrile mobile phases. The quantitative approach was employed without the use of an internal standard, following the external standard method. The spiked recoveries at 3 fortification levels (0.1, 0.2, and 1 mg/kg) ranged from 87.1 % to 108.1 % with relative standard deviations RSD ≤ 9.0 %. By applying this method to fresh fish, shrimp, crab, and shellfish samples from a local supermarket, no residues of bronopol were detected, ensuring the reliability of the results. The simplicity, rapidity, and high sensitivity of the method make it a suitable alternative to conventional techniques for bronopol detection. Moreover, the successful validation of the method's recovery and precision supports its potential application in monitoring and preventing the misuse of bronopol in aquaculture, thereby safeguarding aquaculture product quality and protecting public health.

Electrochemical and Optical Sensors for the Detection of Chemical Carcinogens Causing Leukemia

The incidence and mortality due to neoplastic diseases have shown an increasing tendency over the years. Based on GLOBOCAN 2020 published by the International Agency for Research on Cancer (IARC), leukemias are the thirteenth most commonly diagnosed cancer in the world, with 78.6% of leukemia cases diagnosed in countries with a very high or high Human Development Index (HDI). Carcinogenesis is a complex process initiated by a mutation in DNA that may be caused by chemical carcinogens present in polluted environments and human diet. The IARC has identified 122 human carcinogens, e.g., benzene, formaldehyde, pentachlorophenol, and 93 probable human carcinogens, e.g., styrene, diazinone. The aim of the following review is to present the chemical carcinogens involved or likely to be involved in the pathogenesis of leukemia and to summarize the latest reports on the possibility of detecting these compounds in the environment or food with the use of electrochemical sensors.

Potential Carcinogens in Makeup Cosmetics

Facial makeup cosmetics are commonly used products that are applied to the skin, and their ingredients come into contact with it for many years. Consequently, they should only contain substances that are considered safe or used within an allowable range of established concentrations. According to current European laws, all cosmetics approved for use should be entirely safe for their users, and the responsibility for this lies with manufacturers, distributors, and importers. However, the use of cosmetics can be associated with undesirable effects due to the presence of certain chemical substances. An analysis of 50 random facial makeup cosmetics commercially available on the European Union market and manufactured in six European countries was carried out, concerning the presence of substances with potential carcinogenic properties, as described in recent years in the literature. Nine types of facial makeup cosmetics were selected, and their compositions, as declared on the labels, were analyzed. The carcinogens were identified with information present in the European CosIng database and according to the Insecticide Resistance Action Committee's (IRAC) classification. As a result, the following potential carcinogens were identified: parabens (methylparaben, propylparaben, butylparaben, and ethylparaben), ethoxylated compounds (laureth-4, lautreth-7, or ethylene glycol polymers known as PEG), formaldehyde donors (imidazolidinyl urea, quaternium 15, and DMDM hydantoin), and ethanolamine and their derivatives (triethanolamine and diazolidinyl urea), as well as carbon and silica. In conclusion, all of the analyzed face makeup cosmetics contain potential carcinogenic substances. The literature review confirmed the suppositions regarding the potential carcinogenic effects of selected cosmetic ingredients. Therefore, it seems necessary to carry out studies on the long-term exposure of compounds present in cosmetics and perhaps introduce stricter standards and laws regulating the potential presence of carcinogens and their activity in cosmetics.

Dermal exposure to synthetic musks: Human health risk assessment, mechanism, and control strategy

Synthetic musks (SMs) have been widely used as odor additives in personal care products (PCPs). Dermal exposure to SMs is the main pathway of the accumulation of these chemicals in human kerateins and poses potential health risks. In this study, in silico methods were established to reduce the human health risk of SMs from dermal exposure by investigating the risk mechanisms, designing lower bioaccumulation ability SMs and suggesting proper PCP ingredients using molecular docking, molecular dynamics simulation, and quantitative structure-activity relationship (QSAR) models. The binding energy, a parameter reflecting the binding ability of SMs and human keratin protein (4ZRY), was used as the indicator to assess the human health risk of SMs. According to the mechanism analysis, total energy was found as the most influential molecular structural feature influencing the bioaccumulation ability of a SM, and as one of the main factors influencing the function (i.e., odor sensitivity) of an SM. The 3D-QSAR models were constructed to control the human health risk of SMs by designing lower-risk SMs derivatives. The phantolide (PHAN)- 58 was determined to be the optimum SM derivative with lower bioaccumulation ability (reduced 17.25%) and improved odor sensitivity (increased 7.91%). A further reduction of bioaccumulation ability of PHAN-58 was found when adding proper body wash ingredients (i.e., alkyl ethoxylate sulfate (AES), dimethyloldimethyl (DMDM), EDTA-Na4, ethylene glycol distearate (EGDS), hydroxyethyl cellulose (HEC), lemon yellow and octyl glucose), leading to a significant reduction of the bioaccumulation ability (42.27%) compared with that of PHAN. Results demonstrated that the proposed theoretical mechanism and control strategies could effectively reduce the human health risk of SMs from dermal exposure.

Skin interaction, permeation, and toxicity of silica nanoparticles: Challenges and recent therapeutic and cosmetic advances

Silica nanoparticles (SNPs) received more attention with the emergence of nanotechnology with the aim and promise of becoming innovative drug delivery systems. They have been fulfilling this objective with excellence and nowadays they play a central role in biomedical applications. New SNPs application routes are being explored such as the epidermal, dermal, and transdermal routes. With that, novel models of synthesis, functionalization, and applications constantly appear. However, it is essential that such innovations are accompanied by in-depth studies on permeation, biodistribution, metabolization, and elimination of the generated by-products. Such studies are still incipient, if not rare. This article reviews significant findings on SNPs and their skin interactions. An extensive literature review on SNPs synthesis and functionalization methodologies was performed, as well as on the skin characteristics, skin permeation mechanisms, and in vivo toxicity assessments. Furthermore, studies of the past 5 years on the main therapeutic and cosmetic products employing SNPs, with greater emphasis on in vivo and ex vivo studies were included.