High perimeter impedance defibrillation electrodes reduce skin burns in transthoracic cardioversion

Design of electrodes and current limits for low frequency electrical impedance tomography of the brain

For the novel application of recording of resistivity changes related to neuronal depolarization in the brain with electrical impedance tomography, optimal recording is with applied currents below 100 Hz, which might cause neural stimulation of skin or underlying brain. The purpose of this work was to develop a method for application of low frequency currents to the scalp, which delivered the maximum current without significant stimulation of skin or underlying brain. We propose a recessed electrode design which enabled current injection with an acceptable skin sensation to be increased from 100 muA using EEG electrodes, to 1 mA in 16 normal volunteers. The effect of current delivered to the brain was assessed with an anatomically realistic finite element model of the adult head. The modelled peak cerebral current density was 0.3 A/m(2), which was 5 to 25-fold less than the threshold for stimulation of the brain estimated from literature review.

Incidencia de las alteraciones cutáneas secundarias a la cardioversión eléctrica externa

External electrical cardioversion is a technique basically used as treatment of choice in supraventricular arrhythmias, atrial fibrillation standing out for its frequency. This procedure consists in the application of one or several synchronized electrical discharges through the patient's chest to revert cardiac rhythm to sinus rhythm. One of the complications is generally the appearance of the skin alterations, pain or intense local heat. The objectives of this study were to describe the skin lesions that appeared after an external electrical cardioversion procedure and to evaluate the information received by the patients on discharge. A descriptive study was conducted, using a sample of 68 patients who underwent cardioversion between January 1 and December 30 1, 2004. Mean age was 62.71 years, of which 76.5% were males diagnosed of atrial fibrillation in 82.4% of the cases. Erythema appeared in more than 80% of the cases, with the mean duration of 4.76 days. A total of 13.2% developed second-degree burn. Although 92.5% considered written information on the care after the procedure necessary, less than 11% had received it. It is concluded that the prevalence of the skin alterations after cardioversion is elevated, one of the causal factors being lack of information. There is a significant deficiency of knowledge on skin care after the procedure.

A randomised controlled trial of the effect of biphasic or monophasic waveform on the incidence and severity of cutaneous burns following external direct current cardioversion

OBJECTIVE

Cutaneous burns are a common cause of morbidity following direct current (DC) cardioversion. We designed a prospective randomised double-blinded controlled study to determine the effect of biphasic or monophasic waveform on the pain and inflammation occurring after elective cardioversion.

MATERIALS AND METHODS

One hundred and thirty nine patients undergoing elective DC cardioversion were randomised to receive monophasic (HP Codemaster XL; 100, 200, 300, 360, and 360 J) or biphasic (Welch Allyn-MRL PIC defibrillator; 70, 100, 150, 200, and 300 J) waveforms. Two hours after DC cardioversion, skin temperature, erythema index and sensory threshold to light and sharp touch was measured at the centre and edge of paddle sites. Visual analogue pain score (VAS) was recorded at 2 and 24 h.

RESULTS

There was significantly less pain following biphasic cardioversion as assessed by VAS at both 2 h (p < 0.001; 95% confidence intervals of difference of medians (CI) 0.2-0.8 cm) and 24 h (p = 0.004; 95% CI 0.0-0.4 cm). There was significantly less erythema in patients receiving biphasic cardioversion at the edge of the sternal site (p = 0.046; 95% CI 0.41-4.5). There was no difference in any other variable at any site between biphasic and monophasic cardioversion.

CONCLUSION

The use of a biphasic waveform for DC cardioversion reduces the inflammation and pain of burns as measured by erythema index and visual analogue scale.

The effect of prophylactic topical steroid cream on the incidence and severity of cutaneous burns following external DC cardioversion

INTRODUCTION

Cutaneous burns are a common cause of morbidity following direct current (DC) cardioversion. We designed a prospective double-blinded controlled study to determine whether the application of steroid cream prior to cardioversion reduces their incidence and severity.

MATERIALS AND METHODS

Two hours before elective DC cardioversion, we applied betamethasone 0.1% cream or placebo cream over sternal and apical pad sites in 56 patients, with patients acting as their own controls. Two hours after cardioversion, a separate blinded observer measured the visual analogue pain score (VAS), sensory and pain detection thresholds, skin temperature and erythema index at sternal and apical pad sites.

RESULTS

The study had an 80% power to detect a 50% difference in VAS at 2 h, accepting an alpha error of 0.05. There was no difference between pain at 2 or 24 h, skin temperature, erythema index, sensory and pain detection thresholds at pad sites treated with steroid cream or control.

CONCLUSION

Topical betamethasone 0.1% cream applied 2 h before elective DC cardioversion is no more effective than placebo at reducing the pain and inflammation from cardioversion burns.

The effect of topical non-steroidal anti-inflammatory cream on the incidence and severity of cutaneous burns following external DC cardioversion

INTRODUCTION

Cutaneous burns are a common cause of morbidity following direct current (DC) cardioversion. We designed a study to determine whether the application of non-steroidal anti-inflammatory cream prior to cardioversion reduces their incidence and severity.

MATERIALS AND METHODS

Two hours before elective DC cardioversion, we randomised 55 patients to receive ibuprofen 5% cream or placebo cream over sternal and apical pad sites, with patients acting as their own controls. Two hours after cardioversion an independent blinded observer measured skin temperature, erythema index, and minimum sensory and pain detection thresholds at sternal and apical pad sites. Visual analogue pain score (VAS) for each site was recorded at 2 h and 24 h post-cardioversion.

RESULTS

There was a statistically significant difference between pain measured by VAS, skin temperature and pain detection threshold measured at pad sites with pre-applied ibuprofen 5% cream and those with pre-applied aqueous cream, after elective DC cardioversion.

CONCLUSION

Prophylactic application of topical ibuprofen 5% cream 2h prior to elective DC cardioversion reduces pain and inflammation. Consideration should be given to use of prophylactic application of topical ibuprofen as routine treatment for elective DC cardioversion.

Impedance-gradient electrode reduces skin irritation induced by transthoracic defibrillation

A new type of disposable external defibrillation electrode has been developed to reduce the skin irritation commonly associated with defibrillation and synchronised cardioversion. This design employs an impedance gradient to reduce the proportion of current delivered to the electrode periphery. The temperature distribution under the new electrode was compared with that of four other types of commercially available electrodes after repeated high-energy biphasic defibrillation discharges to domestic swine. Skin temperature distributions were acquired using non-invasive thermography. Measurements of the maximum temperature rise at each electrode site, taken 3.6s after the fifth defibrillation discharge, demonstrated that the new impedance-gradient electrode produced 50-60% less skin heating than two of the three uniform-impedance electrode designs. Histological examination of erythematous sites excised 24 h after defibrillation quantified the associated skin damage using a scoring protocol developed for this study. In contrast to previous studies, histological examinations demonstrated second-degree skin burns following defibrillation. The new electrode design, however, induced 44-46% less skin damage than two of the traditional uniform-impedance electrodes.

The incidence and severity of cutaneous burns following external DC cardioversion

INTRODUCTION

Cutaneous burns are a common cause of morbidity following direct current (DC) cardioversion, but the incidence and severity have never been quantified.

MATERIALS AND METHODS

Two hours after elective DC cardioversion in 83 sequential patients, we measured skin temperature, erythema index, and minimum sensory and pain detection thresholds at paddle sites and control sites on the contralateral side. Visual analogue pain score (VAS) was recorded at 2 and 24h post-cardioversion.

RESULTS

Values for areas over paddle sites were higher (P < 0.05) than control site for all variables measured at 2h. Eighty-four percent patients experienced some pain and 23% patients experienced moderate to severe pain as assessed by VAS. Burns were greater at the edge than the centre of sternal sites and greater at sternal than apical sites. There were positive correlations between transthoracic impedance (TTI) and total energy delivered (r(2) = 0.048; P = 0.04); total energy and pain at 2 h (r(2) = 0.38; P < 0.0001) and 24 h (r(2) = 0.23; P < 0.0001); and number of shocks and pain at 2 h (r(2) = 0.36; P < 0.0001) and 24 h (r(2) = 0.19; P < 0.0001).

CONCLUSION

Elective DC cardioversion causes burns as measured by skin temperature, erythema index and sensory threshold to sharp touch. Pain experienced is related to the total energy and number of shocks delivered. To reduce burns, operators should apply optimal paddle force equally to both paddles, with the paddles applied so as to provide even contact along their edges. Burns may also be minimised by starting with lower energy shocks.

Estimation of current density distribution under electrodes for external defibrillation

BACKGROUND

Transthoracic defibrillation is the most common life-saving technique for the restoration of the heart rhythm of cardiac arrest victims. The procedure requires adequate application of large electrodes on the patient chest, to ensure low-resistance electrical contact. The current density distribution under the electrodes is non-uniform, leading to muscle contraction and pain, or risks of burning. The recent introduction of automatic external defibrillators and even wearable defibrillators, presents new demanding requirements for the structure of electrodes.

METHOD AND RESULTS

Using the pseudo-elliptic differential equation of Laplace type with appropriate boundary conditions and applying finite element method modeling, electrodes of various shapes and structure were studied. The non-uniformity of the current density distribution was shown to be moderately improved by adding a low resistivity layer between the metal and tissue and by a ring around the electrode perimeter. The inclusion of openings in long-term wearable electrodes additionally disturbs the current density profile. However, a number of small-size perforations may result in acceptable current density distribution.

CONCLUSION

The current density distribution non-uniformity of circular electrodes is about 30% less than that of square-shaped electrodes. The use of an interface layer of intermediate resistivity, comparable to that of the underlying tissues, and a high-resistivity perimeter ring, can further improve the distribution. The inclusion of skin aeration openings disturbs the current paths, but an appropriate selection of number and size provides a reasonable compromise.

Optimization of the defibrillation current density in the heart region by a two-layer segmented electrode

Transthoracic defibrillation is a procedure applying high intensity electrical current through the thorax region by electrodes, in order to simultaneously activate most of the myocardial cells, thus enforcing them to reinstate a normal rhythm. A solution is proposed for analysis and synthesis of the current density distribution field in the heart region. In an attempt to reach uniform excitation of the greatest possible quantity of myocardial cells, a field image is searched for, with the J-vector uniformity distribution as a criterion. The finite element method and the method of approximating functions are used, as well as nonlinear programming. This approach resulted in designing a two-layer defibrillation electrode, with the layer applied to to the thorax divided in three different resistivity regions.