Green luminescent iridium(III) complex immobilized in fluoropolymer film as optical oxygen-sensing material

Effects of excitation power density on the Stern-Volmer constant measurement

The Stern-Volmer constant (KSV) is an important parameter to describe the capability of energy transfer to oxygen for porphyrin and its derivatives. By fitting Stern-Volmer equation, IP0/IP = 1 + KSV[O2], the KSV is generally determined through phosphorescence intensities (IP) under aerobic and oxygen-free conditions. In this work, the effect of excitation power density on the KSV measurement is theoretically analyzed and experimentally studied, using palladium octaethylporphyrin (PdOEP) as an example. The IP of PdOEP increased nonlinearly with excitation power density, and the power dependent slope of IP0/IP could be obtained. By way of the functional relationship between the slope of IP0/IP and power density, the real KSV of PdOEP was fitted to be 58 ± 2 kPa-1. The oxygen-dependent phosphorescence lifetimes (τP) and IP under a weak excitation power are also measured to calculate the real KSV, which verifies our analysis.

Porous matrix materials in optical sensing of gaseous oxygen

The review provides comparison of porous materials that act as a matrix for luminescent oxygen indicators. These include silica-gels, sol–gel materials based on silica and organically modified silica (Ormosils), aerogels, electrospun polymeric nanofibers, metal–organic frameworks, anodized alumina, and various other microstructured sensor matrices. The influence of material structure and composition on the efficiency of oxygen quenching and dynamic response times is compared and the advantages and disadvantages of the materials are summarized to give a guide for design and practical application of sensors with desired sensitivity and response time.

Enantiopure, luminescent, cyclometalated Ir(III) complexes with N-heterocyclic carbene-naphthalimide chromophore: design, vibrational circular dichroism and TD-DFT calculations

A series of chiral cyclometalated iridium complexes of the type [Ir(C^N)₂(C^C:)], {(C^N) = ppy (2); dfppy (3)} featuring a naphthalimide N-heterocyclic carbene ligand (C^C:) = (Naphthalimide-NHC) are described and fully characterized. The racemic complexes rac-2 and rac-3 were resolved via chiral column chromatography techniques into their corresponding enantiopure species Δ-2, Λ-2, Δ-3, Λ-3 as confirmed by their CD curves. This unique class of molecules containing organic and inorganic chromophores might be used as a platform to probe the stereochemical effect on the photophysical properties. Vibrational circular dichroism (VCD) was used as an important tool to assign successfully the stereochemistry of the enantiomers. TD-DFT calculations are also advanced to support the experimental studies and to rationalize the observed results.

Multiresponsive Tetradentate Phosphorescent Metal Complexes as Highly Sensitive and Robust Luminescent Oxygen Sensors: Pd(II) Versus Pt(II) and 1,2,3-Triazolyl Versus 1,2,4-Triazolyl

Two Pd(II) complexes based on tetradentate chelate ligands with either a 1,2,4-triazolyl (Pd1) or 1,2,3-triazolyl (Pd2) unit were synthesized, and their structure-property relationships were studied. Both Pd1 and Pd2 are rare bright deep blue Pd(II) phosphors with contrasting properties. Pd1 displays stimuli-responsive luminescence in response to UV irradiation, concentration, or temperature change, which is ascribed to the facile switching of monomer to excimer emission. In contrast, a similar stimuli-responsive luminescence was not observed for Pd2. Crystal structures and time-dependent density functional theory computational studies established that the excimer formation of Pd1 is caused by electronically favored intermolecular π-π interactions and less steric protection of the Pd core because of the position of its alkyl chains, compared to Pd2. In solution, the excimer emission of Pd1 shows a much greater sensitivity toward oxygen than the monomer emission with a very large Stern-Volmer constant ( K_sv) that is more than twice that of the monomer emission. Both Pd(II) complexes are found to be outstanding oxygen sensors in ethyl cellulose films with superior sensitivity ( K_sv^app = 0.228-0.346 Torr^-1) over their Pt(II) equivalents ( K_sv^app = 0.00674-0.0110 Torr^-1), owing to their long phosphorescence decay lifetimes. Furthermore, Pd1 shows an excellent photostability, compared to the Pt(II) analogue, making it one of the best and highly robust oxygen sensors based on cyclometalated metal complexes.

Rapid "turn-on" photoluminescence detection of bisulfite in wines and living cells with a formyl bearing bis-cyclometalated Ir(iii) complex

A new photoluminescence (PL) probe based on a formyl bearing bis-cyclometalated Ir(iii) complex, [Ir(ppy)2phen-CHO]+PF6- (1), is synthesized and applied to the selective detection of a bisulfite anion (HSO3-). Probe 1 is prepared using 2-phenylpyridine (ppy) as the C^N main ligand and 1,10-phenanthroline-5-carboxaldehyde (phen-CHO) as the N^N ancillary ligand. Probe 1 displayed excellent selective PL enhancement in response to HSO3- in acetic acid-sodium acetate buffer solution (pH = 5.0). The increase of PL signal is directly proportional to the concentration of HSO3- in the range of 2 μM to 45 μM with a detection limit of 0.9 μM using 50 μM probe 1 and in the range of 0.5 μM to 6 μM with a detection limit of 0.3 μM using 10 μM probe 1. More importantly, probe 1 can respond to HSO3- rapidly within 40 s. Furthermore, probe 1 was successfully applied to detect HSO3- in real white wines and the bioimaging of HSO3- in living cells. The superior properties of probe 1 make it of great potential use for studying the effects of HSO3- in other biosystems.

Oxygen Sensing, Hypoxia Tracing and in Vivo Imaging with Functional Metalloprobes for the Early Detection of Non-communicable Diseases

Hypoxia has been identified as one of the hallmarks of tumor environments and a prognosis factor in many cancers. The development of ideal chemical probes for imaging and sensing of hypoxia remains elusive. Crucial characteristics would include a measurable response to subtle variations of pO2 in living systems and an ability to accumulate only in the areas of interest (e.g., targeting hypoxia tissues) whilst exhibiting kinetic stabilities in vitro and in vivo. A sensitive probe would comprise platforms for applications in imaging and therapy for non-communicable diseases (NCDs) relying on sensitive detection of pO2. Just a handful of probes for the in vivo imaging of hypoxia [mainly using positron emission tomography (PET)] have reached the clinical research stage. Many chemical compounds, whilst presenting promising in vitro results as oxygen-sensing probes, are facing considerable disadvantages regarding their general application in vivo. The mechanisms of action of many hypoxia tracers have not been entirely rationalized, especially in the case of metallo-probes. An insight into the hypoxia selectivity mechanisms can allow an optimization of current imaging probes candidates and this will be explored hereby. The mechanistic understanding of the modes of action of coordination compounds under oxygen concentration gradients in living cells allows an expansion of the scope of compounds toward in vivo applications which, in turn, would help translate these into clinical applications. We summarize hereby some of the recent research efforts made toward the discovery of new oxygen sensing molecules having a metal-ligand core. We discuss their applications in vitro and/or in vivo, with an appreciation of a plethora of molecular imaging techniques (mainly reliant on nuclear medicine techniques) currently applied in the detection and tracing of hypoxia in the preclinical and clinical setups. The design of imaging/sensing probe for early-stage diagnosis would longer term avoid invasive procedures providing platforms for therapy monitoring in a variety of NCDs and, particularly, in cancers.

TDDFT study on recognition mechanism for the oxygen sensing of the cyclometalated platinum (II) complex

The influence of oxygen molecule on the luminescent properties of a cyclometalated Pt(II) complex Lxp1, was investigated using density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods. Analysis of frontier molecular orbitals and electronic configuration indicated that the highest-occupied molecular orbital of the Lxp1 has a significant mixture of metal Pt (d) as well as 2-phenylpyridine and acetyl acetone(π). The lowest-unoccupied orbital of the Lxp1 primarily locates on π* of 2-phenylpyridineligands. The emission mechanism of the cyclometalated Pt(II) complex Lxp1 is assigned to the mixing of ligand-to-metal charge transfer and ligand-to-ligand charge transfer. The emission mechanism of the Lxp1-O₂ complex can be attributed to the charge transfer from the oxygen molecule to the luminescent material Lxp1. Our study showed that intermolecular hydrogen bonding between the Lxp1 and oxygen molecule was strengthened by the calculation of electronic excitation, leading to a luminescence-decreasing phenomenon. The calculation of the radiative and non-radiative decay rate constants of the Lxp1 and the Lxp1-O₂ complex demonstrates that the phosphorescence from T₁-S₀ of the Lxp1 would alter to the internal conversion from T₁-T₀ of the Lxp1-O₂ complex. This alteration further explains the luminescence quenching phenomenon of the cyclometalated Pt(II) complex Lxp1 after interacting with oxygen molecule.

Single-Particle Ratiometric Pressure Sensing Based on "Double-Sensor" Colloidal Nanocrystals

Ratiometric pressure sensitive paints (r-PSPs) are all-optical probes for monitoring oxygen flows in the vicinity of complex or miniaturized surfaces. They typically consist of a porous binder embedding mixtures of a reference and a sensor chromophore exhibiting oxygen-insensitive and oxygen-responsive luminescence, respectively. Here, we demonstrate the first example of an r-PSP based on a single two-color emitter that removes limitations of r-PSPs based on chromophore mixtures such as different temperature dependencies of the two chromophores, cross-readout between the reference and sensor signals and phase segregation. In our approach, we utilize a novel "double-sensor" r-PSP that features two spectrally separated emission bands with opposite responses to the O₂ pressure, which boosts the sensitivity with respect to traditional reference-sensor pairs. Specifically, we use two-color-emitting dot-in-bulk CdSe/CdS core/shell nanocrystals, exhibiting red and green emission bands from their core and shell states, whose intensities are respectively enhanced and quenched in response to the increased oxygen partial pressure that effectively tunes the position of the nanocrystal's Fermi energy. This leads to a strong and reversible ratiometric response at the single particle level and an over 100% enhancement in the pressure sensitivity. Our proof-of-concept r-PSPs further exhibit suppressed cross-readout thanks to zero spectral overlap between the core and shell luminescence bands and a temperature-independent ratiometric response between 0 and 70 °C.

High sensitivity and accuracy dissolved oxygen (DO) detection by using PtOEP/poly(MMA-co-TFEMA) sensing film

Fluorinated acrylate polymer has received great interest in recent years due to its extraordinary characteristics such as high oxygen permeability, good stability, low surface energy and refractive index. In this work, platinum octaethylporphyrin/poly(methylmethacrylate-co-trifluoroethyl methacrylate) (PtOEP/poly(MMA-co-TFEMA)) oxygen sensing film was prepared by the immobilizing of PtOEP in a poly(MMA-co-TFEMA) matrix and the technological readiness of optical properties was established based on the principle of luminescence quenching. It was found that the oxygen-sensing performance could be improved by optimizing the monomer ratio (MMA/TFEMA=1:1), tributylphosphate(TBP, 0.05mL) and PtOEP (5μg) content. Under this condition, the maximum quenching ratio I0/I100 of the oxygen sensing film is obtained to be about 8.16, Stern-Volmer equation is I0/I=1.003+2.663[O2] (R(2)=0.999), exhibiting a linear relationship, good photo-stability, high sensitivity and accuracy. Finally, the synthesized PtOEP/poly(MMA-co-TFEMA) sensing film was used for DO detection in different water samples.

A long lifetime switch-on iridium(iii) chemosensor for the visualization of cysteine in live zebrafish

A long lifetime iridium(iii) complex chemosensor1for cysteine detection has been synthesized.

Optical methods for sensing and imaging oxygen: materials, spectroscopies and applications

We review the current state of optical methods for sensing oxygen. These have become powerful alternatives to electrochemical detection and in the process of replacing the Clark electrode in many fields. The article (with 694 references) is divided into main sections on direct spectroscopic sensing of oxygen, on absorptiometric and luminescent probes, on polymeric matrices and supports, on additives and related materials, on spectroscopic schemes for read-out and imaging, and on sensing formats (such as waveguide sensing, sensor arrays, multiple sensors and nanosensors). We finally discuss future trends and applications and summarize the properties of the most often used indicator probes and polymers. The ESI† (with 385 references) gives a selection of specific applications of such sensors in medicine, biology, marine and geosciences, intracellular sensing, aerodynamics, industry and biotechnology, among others.

Photophysical behaviour of cyclometalated iridium(III) complexes with phosphino(terthiophene) ligands

Six new Ir(III) complexes containing the 3'-phosphino-2,2':5',2''-terthiophene (PT3) ligand in three different coordination modes are reported. The electronic properties of the complexes are characterized by cyclic voltammetry, absorption, emission and time-resolved transient absorption spectroscopies and DFT/TDDFT calculations. The electrochemical and photophysical behaviour of the complexes was found to be dominated by the PT3 ligand. For the complexes in which the PT3 ligand is coordinated in a bidentate P,S or P,C mode, the lowest energy absorption band is attributed to π-π* PT3 localized transitions consistent with observations from DFT calculations. Emission quantum yields are low in all cases (<0.07) and emission lifetimes are short (<50 ns). Intersystem crossing leads to a long-lived triplet state ((3)L) also localized on the PT3 group. In the complex where the PT3 ligand is coordinated only via the phosphine, TDDFT calculations suggest that there is some MLCT (and Cl-PT3 CT) character in the lowest energy transition.

Indicators for optical oxygen sensors

Continuous monitoring of oxygen concentration is of great importance in many different areas of research which range from medical applications to food packaging. In the last three decades, significant progress has been made in the field of optical sensing technology and this review will highlight the one inherent to the development of oxygen indicators. The first section outlines the bioanalytical fields in which optical oxygen sensors have been applied. The second section gives the reader a comprehensive summary of the existing oxygen indicators with a critical highlight on their photophysical and sensing properties. Altogether, this review is meant to give the potential user a guide to select the most suitable oxygen indicator for the particular application of interest.

Optical oxygen micro- and nanosensors for plant applications

Pioneered by Clark's microelectrode more than half a century ago, there has been substantial interest in developing new, miniaturized optical methods to detect molecular oxygen inside cells. While extensively used for animal tissue measurements, applications of intracellular optical oxygen biosensors are still scarce in plant science. A critical aspect is the strong autofluorescence of the green plant tissue that interferes with optical signals of commonly used oxygen probes. A recently developed dual-frequency phase modulation technique can overcome this limitation, offering new perspectives for plant research. This review gives an overview on the latest optical sensing techniques and methods based on phosphorescence quenching in diverse tissues and discusses the potential pitfalls for applications in plants. The most promising oxygen sensitive probes are reviewed plus different oxygen sensing structures ranging from micro-optodes to soluble nanoparticles. Moreover, the applicability of using heterologously expressed oxygen binding proteins and fluorescent proteins to determine changes in the cellular oxygen concentration are discussed as potential non-invasive cellular oxygen reporters.

Hybrid oxygen-responsive reflective Bragg grating platforms

Oxygen responsive sensor platforms were fabricated by pin printing tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) ([Ru(dpp)(3)](2+)) doped sols onto wavelength tuned reflective Bragg gratings. In an epi-luminescence configuration, these Bragg gratings (Gr) were designed to selectively reflect the O(2) responsive [Ru(dpp)(3)](2+) emission toward the detector to enhance the detected signal magnitude. The xerogel based sensors were formed onto (i) glass (XGl), (ii) directly on top of the grating (XGrGl), or (iii) on the glass substrate opposite the grating (XGlGr). The results show that all sensors exhibit linear, statistically equivalent O(2) sensitivities, and the XGrGl platform yields up to an 8-fold increase in relative detected analytical signal (RDAS) in comparison to the control (XGl) platform.