Mechanical properties of human saphenous veins from normotensive and hypertensive patients

Comparison of the mechanical properties of bypass grafts: Experimental assays

OBJECTIVE

One prevalent therapeutic strategy for addressing atherosclerosis is using an alternative blood supply route to the heart, referred to as bypass surgery. In these surgeries, the saphenous vein, radial artery, and internal mammary artery are commonly used to create this bypass route. Unfortunately, due to negligence regarding the compatibility of the graft with the host tissue, reoperation is often required after several years. One method that can aid in selecting a suitable vein for bypass is simulating the solid-fluid interaction, and performing such simulations requires knowledge of the mechanical properties of bypass grafts. Therefore, extracting the mechanical properties of bypass grafts is essential.

METHODS

In this study, human bypass grafts were subjected to uniaxial tensile testing, and their elastic modulus was extracted and compared. Additionally, the hyperelastic properties of these grafts were extracted using the Mooney-Rivlin model for use in numerical software.

RESULTS

The average elastic modulus in the circumferential direction for radial artery, mammary artery, and saphenous vein samples were determined to be 1.384 ± 0.268 MPa, 3.108 ± 1.652 MPa, and 7.912 ± 2.509 MPa, respectively. Based on the results of uniaxial tests, the saphenous vein exhibited the highest stiffness among the three vascular tissues.

CONCLUSION

The mechanical characterization results of the bypass vessels can be applied to the clinical studies of heart diseases. They may help develop an appropriate treatment approach.

Biomechanics and Mechanobiology of Saphenous Vein Grafts

Within several weeks of use as coronary artery bypass grafts (CABG), saphenous veins (SV) exhibit significant intimal hyperplasia (IH). IH predisposes vessels to thrombosis and atherosclerosis, the two major modes of vein graft failure. The fact that SV do not develop significant IH in their native venous environment coupled with the rapidity with which they develop IH following grafting into the arterial circulation suggests that factors associated with the isolation and preparation of SV and/or differences between the venous and arterial environments contribute to disease progression. There is strong evidence suggesting that mechanical trauma associated with traditional techniques of SV preparation can significantly damage the vessel and might potentially reduce graft patency though modern surgical techniques reduces these injuries. In contrast, it seems possible that modern surgical technique, specifically endoscopic vein harvest, might introduce other mechanical trauma that could subtly injure the vein and perhaps contribute to the reduced patency observed in veins harvested using endoscopic techniques. Aspects of the arterial mechanical environment influence remodeling of SV grafted into the arterial circulation. Increased pressure likely leads to thickening of the medial wall but its role in IH is less clear. Changes in fluid flow, including increased average wall shear stress, may reduce IH while disturbed flow likely increase IH. Nonmechanical stimuli, such as exposure to arterial levels of oxygen, may also have a significant but not widely recognized role in IH. Several potentially promising approaches to alter the mechanical environment to improve graft patency are including extravascular supports or altered graft geometries are covered.

A comparative study on the mechanical properties of the healthy and varicose human saphenous vein under uniaxial loading

Saphenous Vein (SV) due to fatness, age, inactiveness, etc. can be afflicted with varicose. The main reason of the varicose vein is believed to be related to the leg muscle pump which is unable to return the blood to the heart in contradiction of the effect of gravity. As a result of the varicose vein, both the structure and mechanical properties of the vein wall would alter. However, so far there is a lack of knowledge on the mechanical properties of the varicose vein. In this study, a comparative study was carried out to measure the elastic and hyperelastic mechanical properties of the healthy and varicose SVs. Healthy and varicose SVs were removed at autopsy and surgery from seven individuals and then axial tensile load was applied to them up to the failure point. In order to investigate the mechanical behaviour of the vein, this study was benefitted from three different stress definitions, such as 2nd Piola-Kichhoff, engineering and true stresses and four different strain definitions, i.e. Almansi-Hamel, Green-St. Venant, engineering and true strains, to determine the linear mechanical properties of the SVs. A Digital Image Correlation (DIC) technique was used to measure the true strain of the vein walls during load bearing. The non-linear mechanical behaviour of the SVs was also computationally evaluated via the Mooney-Rivlin material model. The true/Cauchy stress-strain diagram exhibited the elastic modulus of the varicose SVs as 45.11% lower than that of the healthy ones. Furthermore, by variation of the stress a significant alteration on the maximum stress of the healthy SVs was observed, but then not for the varicose veins. Additionally, the highest stresses of 4.99 and 0.65 MPa were observed for the healthy and varicose SVs, respectively. These results indicate a weakness in the mechanical strength of the SV when it becomes varicose, owing to the degradation of the elastin and collagen content of the SV. The Mooney-Rivlin hyperelastic and the Finite Element (FE) data were finally well compared to the experimental data.

Comparison between mechanical properties of human saphenous vein and umbilical vein

Background

As a main cause of mortality in developed countries, Coronary Artery Disease (CAD) is known as silent killer with a considerable cost to be dedicated for its treatment. Coronary Artery Bypass Graft (CABG) is a common remedy for CAD for which different blood vessels are used as a detour. There is a lack of knowledge about mechanical properties of human blood vessels used for CABG, and while these properties have a great impact on long-term patency of a CABG. Thus, studying these properties, especially those of human umbilical veins which have not been considered yet, looks utterly necessary.

Methods

Umbilical vein, as well as human Saphenous vein, are respectively obtained after cesarean and CABG. First, histological tests were performed to investigate different fiber contents of the samples. Having prepared samples carefully, force-displacement results of samples were rendered to real stress–strain measurements and then a fourth-order polynomial was used to prove the non-linear behavior of these two vessels.

Results

Results were analyzed in two directions, i.e. circumferentially and longitudinally, which then were compared with each other. The comparison between stiffness and elasticity of these veins showed that Saphenous vein’s stiffness is much higher than that of umbilical vein and also, it is less stretchable. Furthermore, for both vessels, longitudinal stiffness was higher than that of circumferential and in stark contrast, stretch ratio in circumferential direction came much higher than longitudinal orientation.

Conclusion

Blood pressure is very high in the region of aorta, so there should be a stiff blood vessel in this area and previous investigations showed that stiffer vessels would have a better influence on the flow of bypass. To this end, the current study has made an attempt to compare these two blood vessels’ stiffness, finding that Saphenous vein is stiffer than umbilical vein which is somehow as stiff as rat aortic vessels. As blood vessel’s stiffness is directly related to elastin and mainly collagen content, results showed the lower amount of these two contents in umbilical vein regarding Saphenous vein.

Cyclic stretch upregulates SDF-1alpha/CXCR4 axis in human saphenous vein smooth muscle cells

Cyclic stretch (CS) mediates different cellular functions in vascular smooth muscle cells and involves in neointimal hyperplasia and subsequent atherosclerosis of vein grafts. Here, we investigated whether CS can modulate stromal cell-derived factor-1alpha (SDF-1alpha)/CXCR4 axis in human saphenous vein smooth muscle cells. We found CS induced the upregulation of SDF-1alpha and CXCR4 in human saphenous vein smooth muscle cells in vitro, which was dependent on PI3K/Akt/mTOR pathway. Furthermore, CS augmented human saphenous vein smooth muscle migration and focal adhesion kinase (FAK) activation by PI3K/Akt/mTOR pathway. Interestingly, the upregulation of SDF-1alpha/CXCR4 axis was instrumental in CS-induced saphenous vein smooth muscle cell migration and FAK activation, as showed by AMD3100, an inhibitor of SDF-1alpha/CXCR4 axis, partially but significantly blocked the CS-induced cellular effects. Thus, those data suggested SDF-1alpha/CXCR4 axis involves in CS-mediated cellular functions in human saphenous vein smooth muscle cells.

A procedure to simulate coronary artery bypass graft surgery

In coronary artery bypass graft (CABG) surgery the involved tissues are overstretched, which may lead to intimal hyperplasia and graft failure. We propose a computational methodology for the simulation of traditional CABG surgery, and analyze the effect of two clinically relevant parameters on the artery and graft responses, i.e., incision length and insertion angle for a given graft diameter. The computational structural analyses are based on actual three-dimensional vessel dimensions of a human coronary artery and a human saphenous vein. The analyses consider the structure of the end-to-side anastomosis, the residual stresses and the typical anisotropic and nonlinear vessel behaviors. The coronary artery is modeled as a three-layer thick-walled tube. The finite element method is employed to predict deformation and stress distribution at various stages of CABG surgery. Small variations of the arterial incision have relatively big effects on the size of the arterial opening, which depends solely on the residual stress state. The incision length has a critical influence on the graft shape and the stress in the graft wall. Stresses at the heel region are higher than those at the toe region. The changes in the mechanical environment are severe along all transitions between the venous tissue and the host artery. Particular stress concentrations occur at the incision ends. The proposed computational methodology may be useful in designing a coronary anastomotic device for reducing surgical trauma. It may improve the quantitative knowledge of vessel diseases and serve as a tool for virtual planning of vascular surgery.

Cardiac and vascular effects of diltiazem, dobutamine and amrinone, drugs used after myocardial revascularization

Hemodynamic care during postoperative management of myocardial revascularization should include vasorelaxing drugs to insure adequate graft and coronary flow, and stimulation of stroke volume to maintain vascular perfusion pressure. We tested the cardiac (inotropic and lusitropic) and vascular (relaxant) effects of diltiazem (0.1 nM to 0.1 mM), dobutamine (10 microM to 10 mM) and amrinone (10 microM to 1 mM) on isolated rat atria and thoracic aorta, and also on isolated human saphenous vein (HSV) and human mammary artery (HMA). Dobutamine produced a maximal positive inotropic effect (+dF/dt max = 29 +/- 7%) at its ED50 for aortic relaxation (88 +/- 7 microM). Conversely, at their ED50 for aortic relaxation diltiazem depressed myocardial contractility and amrinone did not exhibit myocardial effects. In HSV and HMA contracted with 80 mM potassium, diltiazem and dobutamine (but not amrinone) had a vasorelaxant activity similar to that in rat aorta. Norepinephrine-contracted human vessels were significantly more sensitive than potassium-contracted vessels to the relaxant effect of amrinone (ED50 HMA = 15 +/- 5 microM, ED50 HSV = 72 +/- 31 microM, P < 0.05). We conclude that at concentrations still devoid of myocardial effects dobutamine and amrinone are effective dilators in graft segment vessels and rat aorta contracted by membrane depolarization. If the difference between aortic and myocardial tissue still holds in human tissues, at the appropriate concentrations these drugs should be expected to improve cardiac performance while still contributing to the maintenance of graft patency.

Influence of several methodological procedures utilized to obtain in vitro vascular preparations on endothelial activity

Several maneuvers usually employed to set up isolated vascular preparations could effect the endothelium-dependent relaxation (EDR). The effects of five such maneuvers were studied in rings of rat aorta: 1) Type of anesthesia, 2) Cold storage of the vessels, 3) Length of the stabilization period, 4) Repeated contractions during stabilization, and 5) Performance of washouts during stabilization. Repeated contractions with norepinephrine (NE) 0.1 microM after stabilization altered neither the contraction nor the EDR induced by acetylcholine (Ach) 1 microM. Pentobarbital anesthesia and cold storage of the preparations for 24 h significantly decreased the EDR without effecting the contractile response of the rings. The absence of washouts during stabilization increased the contractions to either NE 0.1 microM or KCl 80 mM by nearly 50%. This increase was prevented by endothelial disruption or, in the presence of intact endothelium, by repeated washouts or by incubation with Bosentan 22 microM. It is concluded that 1) Anesthesia of the animals and cold storage of the preparations can alter the EDR even in the absence of contractile changes in the smooth muscle, and 2) Accumulation of endothelin during the incubation period, even if not producing changes in the resting tension, can substantially alter the subsequent response to vasoactive interventions.

Biomechanical response of femoral vein to chronic elevation of blood pressure in rabbits

Venous diseases like iliofemoral deep vein thrombosis and valvular dysfunction induce venous hypertension. To know the effects of the hypertension on venous mechanics, blood pressure in the left femoral vein in the rabbit was chronically elevated by the constriction of the left external iliac vein. Wall dimensions and biomechanical properties of the femoral vein were studied in vitro at 1, 2, or 4 wk after surgery. Blood pressure measured immediately before the animal was killed was significantly higher in the left femoral vein than in the sham-operated, contralateral vein. Wall thickness was increased by blood pressure elevation even at 1 wk, which restored circumferential wall stress to a control level. The stress was kept at normal up to 4 wk. Vascular tone and vascular contractility were increased by the elevation of blood pressure; however, wall elasticity and compliance were kept at a normal level. These results are very similar to those observed in hypertensive arteries, indicating that not only arteries but veins optimally operate against blood pressure elevation.