Novel anticoagulant polyethylenimine: inhibition of thrombin-catalyzed fibrin formation

Polyester urethane urea (PEUU) functionalization for enhanced anti-thrombotic performance: advancing regenerative cardiovascular devices through innovative surface modifications

Introduction: Thrombogenesis, a major cause of implantable cardiovascular device failure, can be addressed through the use of biodegradable polymers modified with anticoagulating moieties. This study introduces a novel polyester urethane urea (PEUU) functionalized with various anti-platelet deposition molecules for enhanced antiplatelet performance in regenerative cardiovascular devices. Methods: PEUU, synthesized from poly-caprolactone, 1,4-diisocyanatobutane, and putrescine, was chemically oxidized to introduce carboxyl groups, creating PEUU-COOH. This polymer was functionalized in situ with polyethyleneimine, 4-arm polyethylene glycol, seleno-L-cystine, heparin sodium, and fondaparinux. Functionalization was confirmed using Fourier-transformed infrared spectroscopy and X-ray photoelectron spectroscopy. Bio-compatibility and hemocompatibility were validated through metabolic activity and hemolysis assays. The anti-thrombotic activity was assessed using platelet aggregation, lactate dehydrogenase activation assays, and scanning electron microscopy surface imaging. The whole-blood clotting time quantification assay was employed to evaluate anticoagulation properties. Results: Results demonstrated high biocompatibility and hemocompatibility, with the most potent anti-thrombotic activity observed on pegylated surfaces. However, seleno-L-cystine and fondaparinux exhibited no anti-platelet activity. Discussion: The findings highlight the importance of balancing various factors and addressing challenges associated with different approaches when developing innovative surface modifications for cardiovascular devices.

Polyphosphate as an antithrombotic target and hemostatic agent

Polyphosphate (PolyP) is a polymer comprised of linear phosphate units connected by phosphate anhydride bonds. PolyP exists in a diverse range of eukaryotes and prokaryotes with varied chain lengths ranging from six to thousands of phosphate units. Upon activation, human platelets and neutrophils release short-chain PolyP, along with other components, to initiate the coagulation pathway. Long-chain PolyP derived from cellular or bacterial organelles exhibits higher proinflammatory and procoagulant effects compared to short-chain PolyP. Notably, PolyP has been identified as a low-hemorrhagic antithrombotic target since neutralizing plasma PolyP suppresses the thrombotic process without impairing the hemostatic functions. As an inorganic polymer without uniform steric configuration, PolyP is typically targeted by cationic polymers or recombinant polyphosphatases rather than conventional antibodies, small-molecule compounds, or peptides. Additionally, because of its procoagulant property, PolyP has been incorporated in wound-dressing materials to facilitate blood hemostasis. This review summarizes current studies on PolyP as a low-hemorrhagic antithrombotic target and the development of hemostatic materials based on PolyP.

Exploring microplastic impact on whole blood clotting dynamics utilizing thromboelastography

This study investigates the influence of microplastics on blood clotting. It addresses the lack of comprehensive research on the effects of microplastic size and surface modification on clotting dynamics in human whole blood. Thromboelastography was used to examine aminated (aPS), carboxylated (cPS), and non-functionalized (nPS) polystyrene particles with sizes of 50, 100, and 500  nm. Results show that cPS consistently activated the clotting cascade, demonstrating increased fibrin polymerization rates, and enhanced clot strength in a size and concentration-dependent manner. nPS had minimal effects on clotting dynamics except for 50  nm particles at the lowest concentration. The clotting effects of aPS (100  nm particles) resembled those of cPS but were diminished in the 500  nm aPS group. These findings emphasize the importance of microplastic surface modification, size, concentration, and surface area on in-vitro whole blood clotting dynamics.

A Positively Charged Surface Triggers Coagulation Activation Through Factor VII Activating Protease (FSAP)

Contact between biomedical materials and blood often initiates undesirable pro-coagulant and pro-inflammatory processes. On negatively charged materials, blood coagulation is known to be triggered through autoactivation of Factor XII, while activation on cationic surfaces follows a distinct and so far enigmatic mechanism. Because Factor VII activating protease (FSAP) is known to be activated on positively and on negatively charged macromolecules in plasma, we have investigated its interaction with charged biomaterials and its consequences for coagulation. Several activation processes in blood and plasma were characterized after contact with material surfaces with varied charge. FSAP was found to be exclusively activated by the positively charged surfaces polyethylenimine (PEI) and poly-l-lysine (PLL), not by the negatively charged glass or self-assembled monolayer with carboxyl group termination (SAM-COOH), as well as uncharged (Teflon AF) surfaces. Whole blood incubation on PEI showed that this activation was concomitant with coagulation as determined by thrombin and fibrin formation, which was high for glass (F1+2, 138 nM) and PEI (F1+2, 44 nM) but low for Teflon AF (F1+2, 3.3 nM) and SAM COOH (F1+2, 5.8 nM). Contact phase inhibitor diminished coagulation to background levels for all surfaces except PEI (F1+2: ^PEI 43 to 25 nM; glass, 58 to 1.5 nM) indicating that coagulation activation is not dependent on FXII activation on the PEI surface. A decisive role of endogenous FSAP for coagulation however was confirmed with the use of FSAP inhibitory antibodies which showed no influence on Teflon AF, glass and SAM COOH but diminished F1+2 on PEI to less than 50%. We propose that FSAP activation could be a novel mechanism of surface-driven coagulation. An inhibition of this protease might improve hemocompatibility of cationic surfaces and therefore facilitate the application of polycationic surfaces in blood.

Interaction of blood components with cathelicidins and their modified versions

Cationic antimicrobial peptides (cAMPs) serve as effective components of the innate host defense against microbial infections. cAMPs often show broad-spectrum antimicrobial activity, but narrow-band activity is also observed. Despite their great potential, the polycationic nature of cAMPs could cause serious side effects once in the bloodstream which may limit their applications. However, there is very limited knowledge available on AMPs interaction with blood components in spite of the fact that the most likely route of administration to treat systemic microbial infections for these peptides is intravenous, where they immediately come in contact with all blood components. In order to evaluate the therapeutic potential of cAMPs as new alternative to antibiotics, we investigated the impact of cathelicidin related cAMPs on red blood cell lysis, aggregation, platelet activation, blood coagulation, and complement activation. The influence of cAMPs on blood depends on hydrophobicity and number of charges in the peptides. The hemolytic activity of cathelicidin (bactenecin) variants was much less than that of indolicidin due to their lower hydrophobicity. Except indolicidin, none of the peptides induce platelet activation. Some of bactenecin variants (R3, Sub3 and W3) with higher charge inhibited the blood coagulation. The cAMPs did not activate or inhibit complement at the concentrations studied, expect for the peptide (Sub3). Our data shows that it is important to investigate cAMP-based drug candidates regarding their interaction with blood components early on in the development process. We anticipate that this new knowledge on blood interaction of antimicrobial peptides will help to design peptides with a better therapeutic window and with less side effects.

Antithrombotic effect of a novel protein from Fusarium sp. CPCC 480097 in a rat model of artery-vein bypass thrombosis

CONTEXT

The incidence and mortality of thrombotic disorders are rapidly increasing throughout the world. Therefore, attempts have been made to develop new anticoagulant and antithrombotic drugs. Our previous studies showed that a novel protein, named Fu-P, had fibrinogenolytic activity and much higher fibrinolytic activity on the fibrin plate than urokinase in vitro.

OBJECTIVE

The antithrombotic activities of Fu-P in vivo are investigated here for the first time.

MATERIALS AND METHODS

Antithrombotic activity of Fu-P was studied in a rat model of artery-vein bypass thrombosis. The anticoagulant activity of Fu-P was measured by clotting assay of activated partial thrombinplastin time and prothrombin time (PT). The effects of Fu-P on the factor Xa and thrombin were assayed using the chromogenic substrate S-2765 and S-2238.

RESULTS

Intravenous injection of Fu-P produced a 58.4% inhibition ratio of thrombus formation at 0.1 mg/kg body weight, while heparin produced 42.5% inhibition ratio of thrombus formation at 0.6 mg/kg body weight. Fu-P significantly prolonged fibrinogen clotting time, activated partial thrombinplastin time and thrombin time, which also prolonged PT. The inhibition assay of the coagulant factors using chromogenic substrates S-2238 and S-2765 showed that Fu-P was not the inhibitor of the thrombin and Xa.

DISCUSSION AND CONCLUSION

These findings demonstrated that the novel fibrinolytic enzyme (Fu-P) might also be used as a natural agent for thrombolytic therapy or thrombosis prevention.

Screening of endophytic fungi with antithrombotic activity and identification of a bioactive metabolite from the endophytic fungal strain CPCC 480097

Fermentation extracts from 1,075 endophytic fungi were screened by the Markwardt method. The endophytic strain CPCC 480097 had the strongest antithrombotic activity and was identified as Fusarium sp. based on morphologic tests and internal transcriptional spacer sequence analysis. The target of the antithrombotic agent from the endophytic strain CPCC 480097 was identified by analysis of the fibrinogen clotting time, amidolytic activity, and fibrinolytic assay. The results showed that this antithrombotic agent is a 28-kDa single-chain fibrinolytic enzyme. The identification of this fibrinolytic enzyme was performed by liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS). The two internal sequences of this enzyme were obtained, and these showed no homology with those of other known fibrinolytic enzymes.

A fibrin glue composition as carrier for nucleic acid vectors

PURPOSE

Gene delivery from biomaterials has become an important tool in tissue engineering. The purpose of this study was to generate a gene vector-doted fibrin glue as a versatile injectable implant to be used in gene therapy supported tissue regeneration.

METHODS

Copolymer-protected polyethylenimine(PEI)-DNA vectors (COPROGs), naked DNA and PEI-DNA were formulated with the fibrinogen component of the fibrin glue TISSUCOL and lyophilized. Clotting parameters upon rehydration and thrombin addition were measured, vector release from fibrin clots was determined. Structural characterizations were carried out by electron microscopy. Reporter and growth factor gene delivery to primary keratinocytes and chondrocytes in vitro was examined. Finally,chondrocyte colonized clots were tested for their potency in cartilage regeneration in a osteochondral defect model.

RESULTS

The optimized glue is based on the fibrinogen component of TISSUCOL, a fibrin glue widely used in the clinics, co-lyophilized with copolymer-protected polyethylenimine(PEI)- DNA vectors (COPROGs). This material, when rehydrated, forms vector-containing clots in situ upon thrombin addition and is suitable to mediate growth factor gene delivery to primary keratinocytes and primary chondrocytes admixed before clotting. Unprotected PEI-DNA in the same setup was comparatively unsuitable for clot formation while naked DNA was ineffective in transfection. Naked DNA was released rapidly from fibrin clots (>70% within the first seven days) in contrast to COPROGs which remained tightly immobilized over extended periods of time (0.29% release per day). Electron microscopy of chondrocytecolonized COPROG-clots revealed avid endocytotic vector uptake. In situ BMP-2 gene transfection and subsequent expression in chondrocytes grown in COPROG clots resulted in the upregulation of alkaline phosphatase expression and increased extracellular matrix formation in vitro. COPROG-fibrinogen preparations with admixed autologous chondrocytes when clotted in situ in osteochondral defects in the patellar grooves of rabbit femura gave rise to luciferase reporter gene expression detectable for two weeks (n=3 animals per group). However, no significant improvement in cartilage formation in osteochondral defects filled with autologous chondrocytes in BMP-2-COPROG clots was achieved in comparison to controls (n=8 animals per group).

CONCLUSIONS

COPROGs co-lyophilized with fibrinogen are a simple basis for an injectable fibrin gluebased gene-activated matrix. The preparation can be used is complete analogy to fibrin glue preparations that are used in the clinics. However, further improvements in transgene expression levels and persistence are required to yield cartilage regeneration in the osteochondral defect model chosen in this study.

Gastrodin Interaction with Human Fibrinogen: Anticoagulant Effects and Binding Studies

In an effort to identify the anticoagulant activity of gastrodin (GAS) and to investigate the possibility of its use as a novel anticoagulant drug, the binding characteristics of GAS to human fibrinogen (Fg) were studied by using a quartz crystal microbalance (QCM) biosensor, anticoagulant animal experiments, and a molecular docking simulation. Real-time kinetic analysis with the QCM biosensor revealed that the in vitro binding of GAS to Fg was strong under physiological ionic conditions as the determined equilibrium dissociation constant (KD) was 1.94 x 10(-6) M. To check whether this strong binding may influence the natural coagulation function of Fg, the in vivo effect of GAS on the coagulation system of rats was examined. The results showed that GAS can significantly prolong the coagulation time (CT) and decrease the Fg content, while it had no effect on the activated kaolin partial thromboplastin time (KPTT) or prothrombin time (PT) in rats. To clarify the mechanism of the specific interaction, a molecular docking simulation was also performed to provide reasonable binding models for the interaction of GAS with Fg at the atomic level. GAS binds strongly to the inherent polymerization sites "a" and "b" (holes) on the Fg molecule with similar binding free energies of about -34 kJ mol(-1). Altogether, these findings confirmed first that GAS possesses anticoagulant activity and that the possible anticoagulation mechanism of GAS mainly involves its interference with the knob-to-hole interactions between fibrin molecules, thereby effectively inhibiting the formation of clots and decreasing the risk of thrombosis. The study has also shown the potential usefulness of QCM biosensor technology for the rapid screening of drug-protein interactions.