Symmetry in F1-type ATPases

Catalytic mechanism of F1-ATPase

The structure of the core catalytic unit of ATP synthase, alpha 3 beta 3 gamma, has been determined by X-ray crystallography, revealing a roughly symmetrical arrangement of alternating alpha and beta subunits around a central cavity in which helical portions of gamma are found. A low-resolution structural model of F0, based on electron spectroscopic imaging, locates subunit a and the two copies of subunit b outside of a subunit c oligomer. The structures of individual subunits epsilon and c (largely) have been solved by NMR spectroscopy, but the oligomeric structure of c is still unknown. The structures of subunits a and delta remain undefined, that of b has not yet been defined but biochemical evidence indicates a credible model. Subunits gamma, epsilon, b, and delta are at the interface between F1 and F0; gamma epsilon complex forms one element of the stalk, interacting with c at the base and alpha and beta at the top. The locations of b and delta are less clear. Elucidation of the structure F0, of the stalk, and of the entire F1F0 remains a challenging goal.

Synthesis of a self-contained concept of the molecular mechanism of energy interconversion by H(+)-transporting ATP synthase

The original aim of the review has been to probe into the validity of the paradigm on the high energy-carrier function of ATP. It seemed to be called into question on the basis of findings with H(+)-transporting ATP synthase suggesting the formation of ATP from ADP and Pi without energy input. Thus, ATP appeared as a low-energy compound. Starting from the current, rich knowledge of the molecular structure and the inviting thinking on the mechanism of H(+)-transporting ATP synthase, we have endeavoured to freshly interpret and integrate the pertinent observations in the light of the comprehensively derived model of the molecular mechanism of energy interconversion by Na+/K(+)-transporting ATPase. In this way, we have uncovered the common mechanistic elements of the two energy-interconverting enzymes. The emerging purpose of the present paper has been the 'synthesis' of a self-contained concept of the molecular mechanism of the interconversion of electrochemical and chemical Gibbs energies by H(+)-transporting ATP synthase. The outcome is reflected in the following tentative evaluations. 1. In ATP hydrolysis, the great Gibbs energy change which is observed in solution, is largely conserved by the F1 sector of ATP synthase as mechanical Gibbs energy in the enzyme's protein fabric, so that it can be utilized in the resynthesis of ATP from enzyme-bound ADP and Pi. The plainly measured low Gibbs energy change results from large compensating enthalpy and entropy changes that reflect the underlying changes in protein conformation. 2. In stoichiometric ATP synthesis by F1 sector from ADP and Pi bound to the catalytic centre, their intrinsic binding energy brings about a loss of peptide chain entropy that makes possible an entropy-driven ATP formation. 3. The driving force for ATP synthesis cannot be the high Gibbs energy change on binding of product ATP; the tight ATP-enzyme complex rather is a low Gibbs energy intermediate from which escape is difficult. 4. The catalytic centre exists either in an open state unable to firmly bind the substrate-product couple, or in a closed state protecting formed ATP from facile hydrolysis by ambient water. 5. The cleft closure, induced by binding of Pi and ADP or ATP, does not necessarily need external energy supply, because the cleft closure proceeds from rigid domain rotations which can occur rather spontaneously. In further analogy to adenylate kinase, the driving force of this domain movement presumably comes from the electrostatic interactions between phosphate moieties and arginine side chains in the catalytic centre.(ABSTRACT TRUNCATED AT 400 WORDS)

Proton slip of the chloroplast ATPase: its nucleotide dependence, energetic threshold, and relation to an alternating site mechanism of catalysis

The F-ATPase of chloroplasts couples proton flow to ATP synthesis, but is leaky to protons in the absence of nucleotides. This "proton slip" can be blocked by small concentrations of ADP or by inhibitors of the channel portion, CF0. We studied charge flow through the ATPase by flash spectrophotometry and analyzed the inhibition of proton slip by nucleotides, phosphate/arsenate, and insufficient proton motive force. The following inhibition constants (at given background concentrations) were observed: ADP, 0.2 microM (0.5 mM P(i)); ADP, 13.4 microM (no P(i)); P(i), 43 microM (1 microM ADP); GDP, 2.5 microM (0.5 mM P(i)); ATP, 2 microM. ADP and P(i) mutually lowered their respective inhibition constants. Phosphate could be replaced by arsenate. Proton slip occurred only if the proton motive force exceeded a certain threshold, similar to that for ATP synthesis. The inhibition of proton slip by ADP and GDP qualified the respective nucleotide binding sites as belonging to the subset of two (or three) potentially catalytic sites out of the total of six. We interpreted the ADP-induced transition between different conduction states of the ATPase from "slipping" to "closed" to "coupled" as a consequence of the alternating site mechanism of catalysis. Whereas the proton translocator idles in the absence of nucleotides, the high-affinity binding of the first ADP/P(i) couple to one site clutches proton flow to some (conformational) change that can only be executed after the binding of another ADP/P(i) couple to a second site. From there on these sites alternate in the catalytic cycle. An entropic machine is presented which likewise models proton slip, unisite, and multisite ATP synthesis and hydrolysis.

Principles of functional and structural organization in the bacterial cell: 'compartments' and their enzymes

Most bacteria lack obvious compartmentation, i.e., structural partition of the cell into functional entities (organelles) formed by a closed biological membrane. Nevertheless, these organisms exhibit sophisticated regulation and interactions of their catabolic and anabolic pathways; they are able to exploit a great variety of carbon and energy sources, and they conserve and transform energy in an efficient manner. In a less stringent sense, 'compartments' are also present in bacteria if one accepts that bacterial 'compartments' are not necessarily surrounded by a membrane, but are rather defined as mere functional entities characterized by their structural components, their enzymes and other functional proteins such as binding proteins. This view would mean that the bacterial cell can be described as a highly organized structured system comprised of these functional entities. Regulated transport processes within 'compartments' and across boundaries involving low and high molecular mass compounds, solutes, and ions take place within the 'framework' constituted by this structured system. Special emphasis is given to the fact that many of the transport processes take place involving the functional entity 'energized membrane'. This 'framework', the structural basis for the functional potential of a bacterial cell, can be studied by electron microscopy. Advanced sample preparation techniques and imaging modes are available which keep the danger of artefact formation low; they can be applied at cellular and macromolecular levels. Recent developments in immunoelectron microscopy and affinity labelling techniques provide tools which allow to unequivocally locate enzymes and other antigens in the cell and to identify polypeptide chains in enzyme complexes. Application of these approaches in studies on cellular and macromolecular organization of bacteria and their enzyme systems confirmed some old views but also extended our knowledge. This is exemplified by a description of selected enzyme complexes located in the bacterial cytoplasm, in the cytoplasmic membrane or attached to it, in the periplasmic space, and attached to the cell wall or set free into the surrounding medium.

Steady-state kinetic properties of FoF1-ATPase: the pH effect

1. The kinetic properties of FoF1-ATPase from submitochondrial particles isolated from rat heart were studied, with emphasis to the pH effect. The velocity data were treated according to the Hill equation, and the results were discussed on the basis of the knowledge on the soluble F1-ATPase properties. 2. Three kinetic phases were observed in the range of pH 6.0-8.5, with apparent dissociation constant values (K0.5) of 0.001, 0.04 and 1.5 mM (respectively sites I, II and III) at pH 7.0. Their contribution to the total activity of the enzyme were pH-dependent on the range of 6.0-7.0, but not from 7.0 to 8.5, where the maximal velocity (V) for site III was some 4-fold larger than for site II, and the total V of sites II and III was some 40-fold larger than V assumed for site I. Therefore, two catalytic sites seem to participate significantly in the catalysis at steady-state condition. 3. Azide increased the sites II and III K0.5 values as well as decreased the site III V. In the presence of bicarbonate these two sites were not distinguishable, and the kinetic parameters at pH 7.0 were similar to those for sites II and III combined. Both azide and bicarbonate did not have a significant effect on site I, and this behavior was not pH-dependent. 4. The studies on the effect of pH on the kinetic parameters showed the following results: (1) the optimum pH for V was around 8.5; (2) decrease in the K0.5 values at pH below 7.0 for site II, and increase at pH over 7.0 for sites II and III; (3) in the pH range of 6.0-8.5 the Hill coefficient increased for site II, decreased for site III, and an intermediary effect was observed for the sites II and III combined, with a Michaelis-Menten behavior in the highest affinity pH, which was found in the physiological range.

Kinetic studies of ATP synthase: the case for the positional change mechanism

The mitochondrial ATP synthases shares many structural and kinetic properties with bacterial and chloroplast ATP synthases. These enzymes transduce the energy contained in the membrane's electrochemical proton gradients into the energy required for synthesis of high-energy phosphate bonds. The unusual three-fold symmetry of the hydrophilic domain, F1, of all these synthases is striking. Each F1 has three identical beta subunits and three identical alpha subunits as well as three additional subunits present as single copies. The catalytic site for synthesis is undoubtedly contained in the beta subunit or an alpha, beta interface, and thus each enzyme appears to contain three identical catalytic sites. This review summarizes recent isotopic and kinetic evidence in favour of the concept, originally proposed by Boyer and coworkers, that energy from the proton gradient is exerted not directly for the reaction at the catalytic site, but rather to release product from a single catalytic site. A modification of this binding change hypotheses is favored by recent data which suggest that the binding change is due to a positional change in all three beta subunits relative to the remaining subunits of F1 and F0 and that the vector of rotation is influenced by energy. The positional change, or rotation, appears to be the slow step in the process of catalysis and it is accelerated in all F1F0 ATPases studied by substrate binding and by the proton gradient. However, in the mammalian mitochondrial enzyme, other types of allosteric rate regulation not yet fully elucidated seem important as well.

Inhibition of tonoplast ATPase from etiolated mung bean seedlings by fluorescein 5'-isothiocyanate

Fluorescein 5'-isothiocyanate (FITC) was used to modify the lysine residue in the active site of tonoplast H(+)-ATPase from etiolated mung-bean (Vigna radiata L.) seedlings. FITC caused marked inactivation of the enzyme activities of both membrane-bound and soluble ATPase and its associated H+ translocation. The SDS/PAGE pattern revealed that the FITC-binding site was in the large (A) subunit of ATPase. Inhibition could be substantially prevented by its physiological substrate ATP, pyrophosphate and nucleotides in the decreasing order: ATP greater than pyrophosphate greater than ADP greater than AMP greater than GTP greater than CTP greater than UTP. The mode of inhibition by FITC was competitive with respect to ATP. Loss of ATPase activity followed pseudo-first-order kinetics with a Ki of 0.33 mM, a minimum inactivation half-time of 110 s, and a first-order rate constant of 0.244 s-1. A double-logarithmic plot of apparent rate constant versus FITC concentration gave a slope of 0.913, indicating that inactivation results from reaction of at least one lysine residue at the catalytic site of the large subunit. Labelling studies indicated that the incorporation of approx. 1 mol of FITC/mol of ATPase is sufficient to inhibit ATPase completely. The enhancement and blue shift of emission maxima of FITC after modification of ATPase indicated that the labelled lysine residue was located in a relatively hydrophobic domain.

Vacuolar H(+)-translocating ATPases from plants: structure, function, and isoforms

The vacuolar H(+)-translocating ATPase (V-type ATPase) plays a central role in the growth and development of plant cells. In a mature cell, the vacuole is the largest intracellular compartment, occupying about 90% of the cell volume. The proton electrochemical gradient (acid inside) formed by the vacuolar ATPase provides the primary driving force for the transport of numerous ions and metabolites against their electrochemical gradients. The uptake and release of solutes across the vacuolar membrane is fundamental to many cellular processes, such as osmoregulation, signal transduction, and metabolic regulation. Vacuolar ATPases may also reside on endomembranes, such as Golgi and coated vesicles, and thus may participate in intracellular membrane traffic, sorting, and secretion. Plant vacuolar ATPases are large complexes (400-650 kDa) composed of 7-10 different subunits. The peripheral sector of 5-6 subunits includes the nucleotide-binding catalytic and regulatory subunits of approximately 70 and approximately 60 kDa, respectively. Six copies of the 16-kDa proteolipid together with 1-3 other subunits make up the integral sector that forms the H+ conducting pathway. Isoforms of plant vacuolar ATPases are suggested by the variations in subunit composition observed among and within plant species, and by the presence of a small multigene family encoding the 16-kDa and 70-kDa subunits. Multiple genes may encode isoforms with specific properties required to serve the diverse functions of vacuoles and endomembrane compartments.

The ATP synthase (F0-F1) complex in oxidative phosphorylation

The transmembrane electrochemical proton gradient generated by the redox systems of the respiratory chain in mitochondria and aerobic bacteria is utilized by proton translocating ATP synthases to catalyze the synthesis of ATP from ADP and P(i). The bacterial and mitochondrial H(+)-ATP synthases both consist of a membranous sector, F0, which forms a H(+)-channel, and an extramembranous sector, F1, which is responsible for catalysis. When detached from the membrane, the purified F1 sector functions mainly as an ATPase. In chloroplasts, the synthesis of ATP is also driven by a proton motive force, and the enzyme complex responsible for this synthesis is similar to the mitochondrial and bacterial ATP synthases. The synthesis of ATP by H(+)-ATP synthases proceeds without the formation of a phosphorylated enzyme intermediate, and involves co-operative interactions between the catalytic subunits.

Immunoelectron microscopy of enzymes, multienzyme complexes, and selected other oligomeric proteins

The collective term "immunoelectron microscopy" subsumes a number of techniques in which the biological material is decorated with specific antibodies, prior to being visualized in the electron microscope. In this article, we have reviewed literature on immunoelectron microscopy that focusses on the analysis of the molecular architecture of proteins, in particular of enzymes and of multienzyme complexes. Molecular immunoelectron microscopy has been remarkably successful with multi-subunit enzymes of complex quaternary structures, and in many cases the data have been the basis for the eventual development of detailed three-dimensional molecular models. The elucidation of subunit composition and juxtaposition of a given enzyme, an important accomplishment in itself, has in turn stimulated and guided discussions on the catalytic mechanism; illustrative examples include F1 ATPase and citrate lyase, among others. Here we have chosen a variety of enzymes, multienzyme complexes, and non-enzymatic proteins to demonstrate the versatility of immunoelectron microscopy, to illustrate methodological prerequisites and limitations, and to discuss significance and implications of individual immunoelectron microscopy studies.

Respiration and mitochondrial ATPase in energized mitochondria during isoproterenol-induced cell injury of myocardium

1. Respiration of mitochondria, membrane potential and mitochondrial ATPase under energized conditions were studied in rat myocardium during cell injury induced by treatment with isoproterenol. 2. Increase in the state 4 rate of respiration and ADP:O ratio, as well as decrease in the state 3 rate and Respiratory Control Ratio (RCR) were found. 3. The optimum pH for RCR and for maximum ATPase activity was shifted to lower values. 4. The state 3 respiration was more sensitive to oligomycin inhibition. 5. The mitochondria showed lower ability to generate membrane potential. 6. An increase in the K0.5 values for catalytic sites II and III of mitochondrial ATPase at pH 7.4 and 5.5 was found. 7. These results are consistent with alterations on the integrity of mitochondrial membrane, and corroborate with the hypothesis of changes on the mitochondrial ATPase during isoproterenol-induced cell injury of myocardium.