Interaction of human serum albumin with membranes containing polymer-grafted lipids: spin-label ESR studies in the mushroom and brush regimes

Surface Mineralization of Engineered Bacterial Outer Membrane Vesicles to Enhance Tumor Photothermal/Immunotherapy

Gram-negative bacteria can naturally produce nanosized spherical outer membrane vesicles (OMVs) with a lipid bilayer membrane, possessing immunostimulatory capabilities to be potentially applied in tumor therapy. However, the systemic toxicity induced by pathogen-associated molecular patterns (PAMPs) of OMVs is the main obstacle for their clinical translation. Herein, melanin-loaded OMVs were produced with a genetic engineering strategy and further coated with calcium phosphate (CaP) to reduce their toxicity to enhance tumor treatment effects. Wild-type bacterium Escherichia coli Nissle 1917 (EcN) was genetically engineered to highly express tyrosinase to catalyze the intracellular synthesis of melanin, giving melanin-loaded OMVs (OMVMel). To reduce the systemic toxicity in tumor therapy, OMVMel was coated with CaP by surface mineralization to obtain OMVMel@CaP. In comparison with OMVMel, OMVMel@CaP showed lower systemic inflammatory responses in healthy mice and less damage to the liver, spleen, lung, and kidney, so the administration dose could be increased to enhance the antitumor effect. In the acidic tumor microenvironment, the CaP shell disintegrated to release OMVMel to trigger antitumor immune responses. Under costimulation of OMVMel acting as immunoadjuvants and the damage-associated molecular patterns (DAMPs) released by the photothermal effect, the efficiency of tumor photothermal/immunotherapy was largely boosted through promoting the infiltration of matured DCs, M1 macrophages, and activated CD8+ T cells, decreasing the ratio of MDSCs in tumors.

Structural and mechanical properties of folded protein hydrogels with embedded microbubbles

Globular folded proteins are powerful building blocks to create biomaterials with mechanical robustness and inherent biological functionality. Here we explore their potential as advanced drug delivery scaffolds, by embedding microbubbles (MBs) within a photo-activated, chemically cross-linked bovine serum albumin (BSA) protein network. Using a combination of circular dichroism (CD), rheology, small angle neutron scattering (SANS) and microscopy we determine the nanoscale and mesoscale structure and mechanics of this novel multi-composite system. Optical and confocal microscopy confirms the presence of MBs within the protein hydrogel, their reduced diffusion and their effective rupture using ultrasound, a requirement for burst drug release. CD confirms that the inclusion of MBs does not impact the proportion of folded proteins within the cross-linked protein network. Rheological characterisation demonstrates that the mechanics of the BSA hydrogels is reduced in the presence of MBs. Furthermore, SANS reveals that embedding MBs in the protein hydrogel network results in a smaller number of clusters that are larger in size (∼16.6% reduction in number of clusters, 17.4% increase in cluster size). Taken together, we show that MBs can be successfully embedded within a folded protein network and ruptured upon application of ultrasound. The fundamental insight into the impact of embedded MBs in protein scaffolds at the nanoscale and mesoscale is important in the development of future platforms for targeted and controlled drug delivery applications.

Thermotropic effects of PEGylated lipids on the stability of HPPH-encapsulated lipid nanoparticles (LNP)

In this work, we demonstrate the enhanced thermal and steric stability of lipid-based formulations in the presence of encapsulated HPPH that have demonstrated potential cancer applications in previously presented in vivo studies. Differential scanning calorimeter (DSC) was used to study the phase transitions, and domain formations, and to qualify the thermodynamic properties associated with change in lipid bilayer behavior due to the presence of PEGylated at varying concentrations and sizes, and the encapsulated HPPH molecules. Thermal instability was quantified by dramatic changes in calculated enthalpy, and the shape of the melting peak or calculated half width of melting peak. This systematic study focused on understanding the effects of varying molecular mass and concentrations of PEG polymers in the photopolymerizable lipid DC_{8, 9}PC lipid bilayer matrix for four weeks at room temperature of 25 °C. The major findings include increased thermal stability of the lipid bilayer due to the presence of PEG-2 K and the HPPH that resulted from the van der Waals forces between various molecular species, and the change in bilayer curvature confirmed via mathematical correlations. It is demonstrated that the encapsulation of therapeutics in lipid formulations can alter their overall thermal behavior, and therefore, it is imperative to consider calorimetric effects while designing lipid-based vaccines. The presented research methodologies and findings presented can predict the stability of lipid-based vaccines that are under development such as COVID-19 during their storage, transport, and distribution.

Dendronized vesicles: formation, self-organization of dendron-grafted amphiphiles and stability

Fundamental bacterial functions like quorum sensing can be targeted to replace conventional antibiotic therapies. Nanoparticles or vesicles that bind interfacially to charged biomolecules could be used to block quorum sensing pathways in bacteria. Towards this goal, dendronized vesicles (DVs) encompassing polyamidoamine dendron-grafted amphiphiles (PDAs) and dipalmitoyl-sn-glycero-3-phosphocholine lipids are investigated using the molecular dynamics simulation technique in conjunction with an explicit solvent coarse-grained force field. The key physical factors determining the stability of DVs as a function of the dendron generation and relative concentration are identified. The threshold concentration of each dendron generation that yields stable DVs is determined. Dendrons with lower generations rupture the DVs at high relative concentrations due to the electrostatic repulsions between the terminally protonated amines. Whereas, dendrons with intermediate generations demonstrate a mushroom-to-brush transition. Conformational changes in the dendrons expand the outer DV surface, resulting in instability in the DV bilayer. DVs encompassing dendrons with higher generations incur stresses on the bilayer due to their high charge density and spontaneous curvature. The self-organization of PDAs on the DV surface are examined to understand how the asymmetric stresses are minimized across the bilayer. A set of conditions are determined to be conducive for the formation of a single cluster of PDAs that decorates the DV surface like a mesh. Results from this study can potentially guide the design and synthesis of nanoparticles which target quorum sensing pathways in bacteria towards the prevention and treatment of bacterial infections. Furthermore, these nanoparticles can be used in diverse applications in biomedicine, energy or electronics that require synthetic dendronized cells or the adsorption and transport of charged species.

Cryogenically frozen PEGylated liposomes and micelles: Water penetration and polarity profiles

Poly(ethylene glycol) (PEG)-grafted lipid dispersions are widely investigated in fundamental and biotechnological research for their successful use in drug-delivery. Here, we consider mixtures of the bilayer-forming lipid dipalmitoylphosphatidylcholine (DPPC) with the micelle-forming lipid PEG:2000-phosphatidilethanolamine (PEG:2000-DPPE) fully hydrated in D₂O and measured at 77 K. Electron Spin Echo Envelope Modulation and continuous wave Electron Paramagnetic Resonance of chain-labelled lipids are employed to detect the extent of solvent permeation and the environmental polarity, respectively, across the hydrocarbon regions of the lipid assemblies. Sigmoidal water penetration and polarity profiles are described in sterically stabilized liposomes (SSL) formed at submicellar content of PEG:2000-DPPE incorporated in DPPC. Compared to DPPC bilayers, SSL show increased hydrophobicity at both the polar/apolar interface and the chain termini, and a broader transition that is shifted toward the interface. Solvent exposure and polarity decrease on going down the chain in PEG:2000-DPPE micelles. However, compared to SSL, polymer-lipid micelles show higher solvent permeation at any chain segment and the chain termini are accessible to water. In any sample, heterogeneity is found in H-bond formation between the spin-label nitroxide groups and the solvent molecules. The results at cryogenic temperature add new insights into the biophysico-chemical characterization of PEGylated lipid dispersions.

Molecular Simulations of PEGylated Biomolecules, Liposomes, and Nanoparticles for Drug Delivery Applications

Since the first polyethylene glycol (PEG)ylated protein was approved by the FDA in 1990, PEGylation has been successfully applied to develop drug delivery systems through experiments, but these experimental results are not always easy to interpret at the atomic level because of the limited resolution of experimental techniques. To determine the optimal size, structure, and density of PEG for drug delivery, the structure and dynamics of PEGylated drug carriers need to be understood close to the atomic scale, as can be done using molecular dynamics simulations, assuming that these simulations can be validated by successful comparisons to experiments. Starting with the development of all-atom and coarse-grained PEG models in 1990s, PEGylated drug carriers have been widely simulated. In particular, recent advances in computer performance and simulation methodologies have allowed for molecular simulations of large complexes of PEGylated drug carriers interacting with other molecules such as anticancer drugs, plasma proteins, membranes, and receptors, which makes it possible to interpret experimental observations at a nearly atomistic resolution, as well as help in the rational design of drug delivery systems for applications in nanomedicine. Here, simulation studies on the following PEGylated drug topics will be reviewed: proteins and peptides, liposomes, and nanoparticles such as dendrimers and carbon nanotubes.

Bacterial outer membrane vesicles as a platform for biomedical applications: An update

Outer membrane vesicles (OMVs) are produced by Gram-negative bacteria both in vitro and in vivo. OMVs are nano-sized spherical vehicles formed by lipid bilayer membranes and contain multiple parent bacteria-derived components. Based on the presence of bacterial antigens, pathogen-associated molecular patterns (PAMPs), adhesins, various proteins and the vesicle structure, OMVs have been developed for biomedical applications as bacterial vaccines, adjuvants, cancer immunotherapy agents, drug delivery vehicles, and anti-bacteria adhesion agents. In this review, we analyze the contributions of the structure and composition of OMVs to their applications, summarize the methods used to isolate and characterize OMVs, and highlight recent progress and future perspectives of OMVs in biomedical applications.

Protein corona variation in nanoparticles revisited: A dynamic grouping strategy

Bio-nano interface investigation models are mainly based on the type of proteins present on corona, bio-nano interaction responses and the evaluation of final outcomes. Due to the extensive diversity in correlative models for investigation of nanoparticles biological responses, a comprehensive model considering different aspects of bio-nano interface from nanoparticles properties to protein corona fingerprints appeared to be essential and cannot be ignored. In order to minimize divergence in studies in the era of bio-nano interface and protein corona with following therapeutic implications, a useful investigation model on the basis of RADAR concept is suggested. The contents of RADAR concept consist of five modules: 1- Reshape of our strategy for synthesis of nanoparticles (NPs), 2- Application of NPs selected based on human fluid, 3- Delivery strategy of NPs selected based on target tissue, 4- Analysis of proteins present on corona using correct procedures and 5- Risk assessment and risk reduction upon the collection and analysis of results to increase drug delivery efficiency and drug efficacy. RADAR grouping strategy for revisiting protein corona phenomenon as a key of success will be discussed with respect to the current state of knowledge.

How Low Can You Go? Low Densities of Poly(ethylene glycol) Surfactants Attract Stealth Proteins

It is now well-established that the surface chemistry and "stealth" surface functionalities such as poly(ethylene glycol) (PEG) chains of nanocarriers play an important role to decrease unspecific protein adsorption of opsonizing proteins, to increase the enrichment of specific stealth proteins, and to prolong the circulation times of the nanocarriers. At the same time, PEG chains are used to provide colloidal stability for the nanoparticles. However, it is not clear how the chain length and density influence the unspecific and specific protein adsorption keeping at the same time the stability of the nanoparticles in a biological environment. Therefore, this study aims at characterizing the protein adsorption patterns depending on PEG chain length and density to define limits for the amount of PEG needed for a stealth effect by selective protein adsorption as well as colloidal stability during cell experiments. PEG chains are introduced using the PEGylated Lutensol AT surfactants, which allow easy modification of the nanoparticle surface. These findings indicate that a specific enrichment of stealth proteins already occurs at low PEG concentrations; for the decrease of unspecific protein adsorption and finally the colloidal stability a full surface coverage is advised.

Safety of Nanoparticles in Medicine

Nanomedicine involves the use of nanoparticles for therapeutic and diagnostic purposes. During the past two decades, a growing number of nanomedicines have received regulatory approval and many more show promise for future clinical translation. In this context, it is important to evaluate the safety of nanoparticles in order to achieve biocompatibility and desired activity. However, it is unwarranted to make generalized statements regarding the safety of nanoparticles, since the field of nanomedicine comprises a multitude of different manufactured nanoparticles made from various materials. Indeed, several nanotherapeutics that are currently approved, such as Doxil and Abraxane, exhibit fewer side effects than their small molecule counterparts, while other nanoparticles (e.g. metallic and carbon-based particles) tend to display toxicity. However, the hazardous nature of certain nanomedicines could be exploited for the ablation of diseased tissue, if selective targeting can be achieved. This review discusses the mechanisms for molecular, cellular, organ, and immune system toxicity, which can be observed with a subset of nanoparticles. Strategies for improving the safety of nanoparticles by surface modification and pretreatment with immunomodulators are also discussed. Additionally, important considerations for nanoparticle safety assessment are reviewed. In regards to clinical application, stricter regulations for the approval of nanomedicines might not be required. Rather, safety evaluation assays should be adjusted to be more appropriate for engineered nanoparticles.

Polyethylene glycol (PEG)-dendron phospholipids as innovative constructs for the preparation of super stealth liposomes for anticancer therapy

Pegylation of nanoparticles has been widely implemented in the field of drug delivery to prevent macrophage clearance and increase drug accumulation at a target site. However, the shielding effect of polyethylene glycol (PEG) is usually incomplete and transient, due to loss of nanoparticle integrity upon systemic injection. Here, we have synthesized unique PEG-dendron-phospholipid constructs that form super stealth liposomes (SSLs). A β-glutamic acid dendron anchor was used to attach a PEG chain to several distearoyl phosphoethanolamine lipids, thereby differing from conventional stealth liposomes where a PEG chain is attached to a single phospholipid. This composition was shown to increase liposomal stability, prolong the circulation half-life, improve the biodistribution profile and enhance the anticancer potency of a drug payload (doxorubicin hydrochloride).

Surface-initiated hyperbranched polyglycerol as an ultralow-fouling coating on glass, silicon, and porous silicon substrates

Anionic ring-opening polymerization of glycidol was initiated from activated glass, silicon, and porous silicon substrates to yield thin, ultralow-fouling hyperbranched polyglycerol (HPG) graft polymer coatings. Substrates were activated by deprotonation of surface-bound silanol functionalities. HPG polymerization was initiated upon the addition of freshly distilled glycidol to yield films in the nanometer thickness range. X-ray photoelectron spectroscopy, contact angle measurements, and ellipsometry were used to characterize the resulting coatings. The antifouling properties of HPG-coated surfaces were evaluated in terms of protein adsorption and the attachment of mammalian cells. The adsorption of bovine serum albumin and collagen type I was found to be reduced by as much as 97 and 91%, respectively, in comparison to untreated surfaces. Human glioblastoma and mouse fibroblast attachment was reduced by 99 and 98%, respectively. HPG-grafted substrates outperformed polyethylene glycol (PEG) grafted substrates of comparable thickness under the same incubation conditions. Our results demonstrate the effectiveness of antifouling HPG graft polymer coatings on a selected range of substrate materials and open the door for their use in biomedical applications.

Evaluation of anticancer activity of celastrol liposomes in prostate cancer cells

CONTEXT

Celastrol, a natural compound derived from the herb Tripterygium wilfordii, is known to have anticancer activity, but is not soluble in water.

OBJECTIVE

Formation of celastrol liposomes, to avoid the use of toxic solubilising agents.

MATERIALS AND METHODS

Two different formulations of PEGylated celastrol liposomes were fabricated. Liposomal characteristics and serum stability were determined using dynamic light scattering. Drug entrapment efficacy and drug release were measured spectrophotometrically. Cellular internalisation and anticancer activity was measured in prostate cancer cells.

RESULTS

Liposomal celastrol displayed efficient serum stability, cellular internalisation and anticancer activity, comparable to that of the free drug reconstituted in dimethyl sulfoxide.

DISCUSSION AND CONCLUSION

Liposomal celastrol can decrease the viability of prostate cancer cells, while eliminating the need for toxic solubilising agents.

The nano-plasma interface: Implications of the protein corona

The interactions between nanoparticles and macromolecules in the blood plasma dictate the biocompatibility and efficacy of nanotherapeutics. Accordingly, the properties of nanoparticles and endogenous biomolecules change at the nano-plasma interface. Here, we review the implications of such changes including toxicity, immunological recognition, molecular targeting, biodistribution, intracellular uptake, and drug release. Although this interface poses several challenges for nanomedicine, it also presents opportunities for exploiting nanoparticle-protein interactions.

Experimental aspects of colloidal interactions in mixed systems of liposome and inorganic nanoparticle and their applications

In the past few years, growing attention has been devoted to the study of the interactions taking place in mixed systems of phospholipid membranes (for instance in the form of vesicles) and hard nanoparticles (NPs). In this context liposomes (vesicles) may serve as versatile carriers or as a model system for biological membranes. Research on these systems has led to the observation of novel hybrid structures whose morphology strongly depends on the charge, composition and size of the interacting colloidal species as well as on the nature (pH, ionic strength) of their dispersing medium. A central role is played by the phase behaviour of phospholipid bilayers which have a tremendous influence on the liposome properties. Another central aspect is the incorporation of nanoparticles into vesicles, which is intimately linked to the conditions required for transporting a nanoparticle through a membrane. Herein, we review recent progress made on the investigations of the interactions in liposome/nanoparticle systems focusing on the particularly interesting structures that are formed in these hybrid systems as well as their potential applications.

Single component and selective competitive protein adsorption in a patchy polymer brush: opposition between steric repulsions and electrostatic attractions

This work explores the use of "patchy" polymer brushes to control protein adsorption rates on engineered surfaces and to bind targeted species from protein mixtures with high selectivity but without invoking molecular recognition. The brushes of interest contain embedded cationic "patches" composed of isolated adsorbed poly(l-lysine) coils (PLL) that are about 10 nm in diameter and are randomly arranged on a silica substrate. Around these patches is a protein-resistant poly(ethylene glycol) (PEG) brush that is formed from the adsorption of a PLL-g-PEG graft copolymer on the remaining silica surface. Electrostatic attractions between individual cationic patches and the negative regions of approaching proteins may be energetically insufficient to bind proteins. Furthermore, protein-patch attractions are reduced by steric repulsions between proteins and the PEG brush. We show that protein adsorption, gauged by ultimate short-term coverages and by the initial protein adsorption rate, exhibits an adhesion threshold: pure PEG brushes of the architectures employed here and brushes containing sparse loadings of PLL patches do not adsorb protein. Above a critical PLL patch loading or threshold, protein adsorption proceeds, often dramatically. The PLL patch thresholds are specific to the protein of interest, allowing surfaces to be engineered to adhesively discriminate different proteins within a mixture. The separation achieved is remarkably sharp: one protein adsorbs, but the second is completely rejected from the interface. The surfaces in this study, by virtue of their well-controlled and well-characterized patchy nature, distinguish themselves from multicomponent brushes or brushes used to end-tether peptide sequences and nucleotides.

Effect of a PEGylated lipid on the dispersion stability and dynamic surface tension of aqueous DPPC and on the interactions with albumin

Dispersions of dipalmitoylphosphatidylcholine (DPPC) vesicles at 0.1 wt % (1000 ppm) in aqueous isotonic buffer solutions produced by extensive sonication were found to be colloidally stable for hours and days. They also had very low (<10 mN/m) dynamic surface tension minima (DSTM) under pulsating area conditions at 37 degrees C at 20 rpm area pulsation rate. When a 1000 ppm DPPC dispersion was mixed with a stable solution of 1000 ppm bovine serum albumin (BSA), it became colloidally unstable, aggregating within minutes, implying that heterocoagulation between lipid vesicles and albumin takes place. The heterocoagulated dispersion produced high DSTM because the lipid transport rate to the interface became slower. Moreover, the protein may have been transported to the surface faster and adsorbed more than the lipid at the surface. DPPC lipid vesicles were modified for reducing aggregation with other vesicles or with the protein with the addition of a small weight fraction of a neutral "PEGylated" lipid, with a covalently bonded poly(ethylene glycol) (PEG) group. The mixed vesicles were found to be quite more stable than the DPPC vesicles, remaining stable for months, apparently stabilized by steric forces. The colloidal stability at the initial stages of coagulation was evaluated quantitatively from the Fuchs-Smoluchowski stability ratio W. When the modified lipid vesicle dispersion was mixed with the albumin, the vesicles showed no tendency to aggregate with the albumin molecules for days, also probably because of steric repulsion between the PEGylated lipid and the protein. Finally, the mixed lipid dispersions maintained their low DSTM as did the DPPC vesicles without the albumin, and also in the presence of albumin. The results have implications on the use of DPPC or DPPC-based lipids in treating alveolar respiratory diseases without albumin inhibition of their surface tension lowering ability.

The role of hydrogen bonding in tethered polymer layers

A molecular theory to study the properties of end-tethered polymer layers, in which the polymers have the ability to form hydrogen bonds with water, is presented. The approach combines the ideas of the single-chain mean-field theory to treat tethered layers with the approach of Dormidontova (Macromolecules, 2002, 35, 987.) to include hydrogen bonds. The generalization includes the consideration of position-dependent polymer-water and water-water hydrogen bonds. The theory is applied to model poly(ethylene oxide) (PEO), and the predictions are compared with equivalent polymer layers that do not form hydrogen bonds. It is found that increasing the temperature lowers the solubility of the PEO and results in a collapse of the layer at high enough temperatures. The properties of the layer and their temperature dependence are shown to be the result of the coupling between the conformational entropy of the chains, the ability of the polymer to form hydrogen bonds, and the intermolecular interactions. The structural and thermodynamic properties of the PEO layers, such as the lateral pressure-area isotherms and polymer chemical potentials, are studied as a function of temperature and type of tethering surface. The possibility of phase separation of the PEO layer at high enough temperature is predicted due to the reduced solubility induced by breaking of polymer-water hydrogen bonds. A discussion of the advantages and limitations of the theory, together with how to apply the approach to different hydrogen-bonding polymers, is presented.

Self-assembled monothiol-terminated hyperbranched polyglycerols on a gold surface: a comparative study on the structure, morphology, and protein adsorption characteristics with linear poly(ethylene glycol)s

Monothiol-terminated hyperbranched polyglycerols (HPGs) were synthesized by ring-opening polymerization of glycidol from partially deprotonated 2,2'-dihydroxyethane disulfide as the initiator and subsequent reduction of the disulfide group. Two molecular weights of HPG thiols were synthesized. The molecular weights of the polymers were determined by MALDI-TOF analysis, and the presence of thiol was verified by Ellman's assay. The self-assembly of HPG thiols on gold was studied and compared with that of linear poly(ethylene glycol) (PEG) thiols utilizing various surface analysis techniques. Monothiol-functionalized HPGs readily adsorbed to a gold surface and formed highly uniform thin films on the surface. The graft density of the HPG layer decreased with an increase in the molecular weight of the polymer. The amount of polymer on the surface increased with increasing incubation concentration and saturated above 6 g/L polymer concentration. Generally, HPG thiols gave lower graft density compared to linear PEG thiols of similar molecular weight. AFM morphological studies showed that HPG thiols form more uniform and smooth surface films compared to PEG thiols. Incubation of a polymer-coated surface (HPG thiols and PEG thiols) with bovine serum albumin and immunoglobulin showed that the high molecular weight hyperbranched polyglycerol was more resistant to protein adsorption than linear PEG of similar molecular weight or lower molecular weight HPG. The protein adsorption decreased with increasing graft density of the HPG chains on the surface. Our results show that HPG could be a good alternative to PEG in the development of nonfouling functional surfaces.

Influence of poly(ethylene glycol) grafting density and polymer length on liposomes: Relating plasma circulation lifetimes to protein binding

The incorporation of poly(ethylene glycol) (PEG)-conjugated lipids in lipid-based carriers substantially prolongs the circulation lifetime of liposomes. However, the mechanism(s) by which PEG-lipids achieve this have not been fully elucidated. It is believed that PEG-lipids mediate steric stabilization, ultimately reducing surface-surface interactions including the aggregation of liposomes and/or adsorption of plasma proteins. The purpose of the studies described here was to compare the effects of PEG-lipid incorporation in liposomes on protein binding, liposome-liposome aggregation and pharmacokinetics in mice. Cholesterol-free liposomes were chosen because of their increasing importance as liposomal delivery systems and their marked sensitivity to protein binding and aggregation. Specifically, liposomes containing various molecular weight PEG-lipids at a variety of molar proportions were analyzed for in vivo clearance, aggregation state (size exclusion chromatography, quasi-elastic light scattering, cryo-transmission and freeze fracture electron microscopy) as well as in vitro and in vivo protein binding. The results indicated that as little as 0.5 mol% of 1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine (DSPE) modified with PEG having a mean molecular weight of 2000 (DSPE-PEG(2000)) substantially increased plasma circulation longevity of liposomes prepared of 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC). Optimal plasma circulation lifetimes could be achieved with 2 mol% DSPE-PEG(2000). At this proportion of DSPE-PEG(2000), the aggregation of DSPC-based liposomes was completely precluded. However, the total protein adsorption and the protein profile was not influenced by the level of DSPE-PEG(2000) in the membrane. These studies suggest that PEG-lipids reduce the in vivo clearance of cholesterol-free liposomal formulations primarily by inhibition of surface interactions, particularly liposome-liposome aggregation.

Electron spin-echo studies of spin-labelled lipid membranes and free fatty acids interacting with human serum albumin

Human serum albumin (HSA) is an abundant plasma protein that transports fatty acids and also binds a wide variety of hydrophobic pharmacores. Echo-detected (ED) EPR spectra and D(2)O-electron spin echo envelope modulation (ESEEM) Fourier-transform spectra of spin-labelled free fatty acids and phospholipids were used jointly to investigate the binding of stearic acid to HSA and the adsorption of the protein on dipalmitoyl phosphatidylcholine (DPPC) membranes. In membranes, torsional librations are detected in the ED-spectra, the intensity of which depends on chain position at low temperature. Water penetration into the membrane is seen in the D(2)O-ESEEM spectra, the intensity of which decreases greatly at the middle of the membrane. Both the chain librational motion and the water penetration are only little affected by adsorption of serum albumin at the DPPC membrane surface. In contrast, both the librational motion and the accessibility of the chains to water are very different in the hydrophobic fatty acid binding sites of HSA from those in membranes. Indeed, the librational motion of bound fatty acids is suppressed at low temperature, and is similar for the different chain positions, at all temperatures. Correspondingly, all segments of the bound chains are accessible to water, to rather similar extents.

Protein adsorption on polymer-modified silica particle surface

Silicon substrate surface and silica particle surface were modified with five kinds of polymers, poly(2-methoxyethyl methacrylate) (pMEMA), poly(2-hydroxyethyl methacrylate) (pHEMA), poly(acrylamide) (pAAm), poly(methyl methacrylate) (pMMA), and poly(styrene) (pSt), using a combined polymerization of surface-initiated polymerization that gives dense polymer chain layers and atom transfer radical polymerization (ATRP) that yields polymers with a narrow molecular weight distribution. Measurements of water contact angle and polymer chain amount on the modified silicon substrate surface and adsorption amounts of proteins (albumin and fibrinogen) on the modified silica particle surface revealed that the amount of polymer on the modified surface greatly affects the suppression of protein adsorption on the surface.

Kinetics of protein adsorption and desorption on surfaces with grafted polymers

The kinetics of protein adsorption are studied using a generalized diffusion approach which shows that the time-determining step in the adsorption is the crossing of the kinetic barrier presented by the polymers and already adsorbed proteins. The potential of mean-force between the adsorbing protein and the polymer-protein surface changes as a function of time due to the deformation of the polymer layers as the proteins adsorb. Furthermore, the range and strength of the repulsive interaction felt by the approaching proteins increases with grafted polymer molecular weight and surface coverage. The effect of molecular weight on the kinetics is very complex and different than its role on the equilibrium adsorption isotherms. The very large kinetic barriers make the timescale for the adsorption process very long and the computational effort increases with time, thus, an approximate kinetic approach is developed. The kinetic theory is based on the knowledge that the time-determining step is crossing the potential-of-mean-force barrier. Kinetic equations for two states (adsorbed and bulk) are written where the kinetic coefficients are the product of the Boltzmann factor for the free energy of adsorption (desorption) multiplied by a preexponential factor determined from a Kramers-like theory. The predictions from the kinetic approach are in excellent quantitative agreement with the full diffusion equation solutions demonstrating that the two most important physical processes are the crossing of the barrier and the changes in the barrier with time due to the deformation of the polymer layer as the proteins adsorb/desorb. The kinetic coefficients can be calculated a priori allowing for systematic calculations over very long timescales. It is found that, in many cases where the equilibrium adsorption shows a finite value, the kinetics of the process is so slow that the experimental system will show no adsorption. This effect is particularly important at high grafted polymer surface coverage. The construction of guidelines for molecular weight/surface coverage necessary for kinetic prevention of protein adsorption in a desired timescale is shown. The time-dependent desorption is also studied by modeling how adsorbed proteins leave the surface when in contact with a pure water solution. It is found that the kinetics of desorption are very slow and depend in a nonmonotonic way in the polymer chain length. When the polymer layer thickness is shorter than the size of the protein, increasing polymer chain length, at fixed surface coverage, makes the desorption process faster. For polymer layers with thickness larger than the protein size, increases in molecular weight results in a longer time for desorption. This is due to the grafted polymers trapping the adsorbed proteins and slowing down the desorption process. These results offer a possible explanation to some experimental data on adsorption. Limitations and extension of the developed approaches for practical applications are discussed.

A method to evaluate the effect of liposome lipid composition on its interaction with the erythrocyte plasma membrane

Lipid aggregates are considered promising carriers for macromolecules and toxic drugs. In order to fulfill this function, aggregates should have properties that ensure the efficient delivery of their cargo to the desired location. One of these properties is their stability in blood when accumulating in the targeted tissue. This stability may be affected by a number of factors, including enzymatic activity, protein adsorption, and non-specific lipid exchange between the aggregate and morphological blood components. Since blood cells in the majority consist of erythrocytes, their interaction with aggregates should be carefully analyzed. In this paper, we present a method that allows the exchange of lipid between liposomes and the erythrocyte plasma membrane to be evaluated. The extent of this exchange was measured in terms of the toxicity of a cationic lipid (DOTAP) incorporated into the liposome lipid bilayer, evaluated by plasma membrane mechanical properties. After liposomes were formed from DOTAP/PC or DOTAP/PE mixtures, erythrocyte plasma membranes were destabilized in a manner dependent on DOTAP concentration. A constant quantity of DOTAP mixed with various proportions of SM caused no such effect, indicating very limited lipid exchange with the cell membrane for such liposome formulations.

Transfer of stearic acids from albumin to polymer-grafted lipid containing membranes probed by spin-label electron spin resonance

Human serum albumin (HSA) has been spin-labelled with stearic acids having the nitroxide moiety attached to the hydrocarbon chain either at the 5th or at the 16th carbon atom (n-SASL, n = 5 and 16, respectively) with respect to the carboxyl groups. Its interaction with sterically stabilized liposomes (SSL) composed of dipalmitoylphosphatidylcholine (DPPC) mixed with submicellar content of poly(ethylene glycol:2000)-grafted dipalmitoyl phosphatidylethanolamine (PEG:2000-DPPE) has been studied by conventional electron spin resonance (ESR) spectroscopy. In the absence of bilayer membranes, the ESR spectra of nitroxide stearic acids non-covalently bound to HSA are single component powder patterns, indicative of spin labels undergoing temperature dependent anisotropic motion in the slow motional regime on the conventional ESR timescale. The adsorption of HSA to DPPC bilayers results in two component ESR spectra. Indeed, superimposed to an anisotropic protein-signal appears a more isotropic signal due to the labels in the lipid environment. This accounts for the transfer of fatty acids from the protein to DPPC bilayers. Two spectral components with different rotational mobility are also singled out in the spectra of n-SASL bound to HSA when DPPC/PEG:2000-DPPE mixtures are present in the dispersion medium. The fraction, f(L)(16-SASL), of spin labels transferred from the protein to lipid/polymer-lipid lamellar membranes has been quantified performing spectral subtraction. It is found that f(L)(16-SASL) decreases on increasing the content of the polymer-lipid mixed with DPPC. It is strongly reduced in the low-density mushroom regime and levels off in the high-density brush regime of the polymer-lipid content as a result of the steric stabilization exerted by the PEG-lipids. Moreover, the fraction of transferred fatty acids from HSA to SSL is dependent on the physical state of the lipid bilayers. It progressively increases with increasing the temperature from the gel to the liquid-crystalline lamellar phases of the mixed lipid/polymer-lipid membranes, although such a dependence is much weaker in the brush regime.

Liposomes, disks, and spherical micelles: aggregate structure in mixtures of gel phase phosphatidylcholines and poly(ethylene glycol)-phospholipids

Poly(ethylene glycol) (PEG) decorated lipid bilayers are widely used in biomembrane and pharmaceutical research. The success of PEG-lipid stabilized liposomes in drug delivery is one of the key factors for the interest in these polymer/lipid systems. From a more fundamental point of view, it is essential to understand the effect of the surface grafted polymers on the physical-chemical properties of the lipid bilayer. Herein we have used cryo-transmission electron microscopy and dynamic light scattering to characterize the aggregate structure and phase behavior of mixtures of PEG-lipids and distearoylphosphatidylcholine or dipalmitoylphosphatidylcholine. The PEG-lipids contain PEG of molecular weight 2000 or 5000. We show that the transition from a dispersed lamellar phase (liposomes) to a micellar phase consisting of small spherical micelles occurs via the formation of small discoidal micelles. The onset of disk formation already takes place at low PEG-lipid concentrations (<5 mol %) and the size of the disks decreases as more PEG-lipid is added to the lipid mixture. We show that the results from cryo-transmission electron microscopy correlate well with those obtained from dynamic light scattering and that the disks are well described by an ideal disk model. Increasing the temperature, from 25 degrees C to above the gel-to-liquid crystalline phase transition temperature for the respective lipid mixtures, has a relatively small effect on the aggregate structure.

Association of sugar-based carboranes with cationic liposomes: an electron spin resonance and light scattering study

The possibility of cationic (di-oleoyltrimethylammonium propane, DOTAP)/(L-alpha-dioleoylphosphatidyl-ethanolamine, DOPE) liposomes to act as carriers of boronated compounds such as 1,2-dicarba-closo-dodecaboran(12)-1-ylmethyl](beta-D-galactopyranosyl)-(1-->4)-beta-D-glucopyranoside and 1,2-di-(beta-D-gluco-pyranosyl-ox)methyl-1,2-dicarba-closo-dodeca-borane(12) has been investigated by Electron Spin Resonance (ESR) of n-doxyl stearic acids (n-DSA) and Quasi-Elastic Light Scattering (QELS). Both these carboranes have potential use in Boron Neutron Capture Therapy (BNCT), which is a targeted therapy for the treatment of radiation resistant tumors. They were shown to give aggregation both in plain water and in saline solution. Carborane aggregates were, however, disrupted when DOTAP/DOPE liposome solutions were used as dispersing agents. The computer analysis of the ESR spectra from carborane-loaded liposomes allowed to establish an increase of the order degree in the liposome bilayer with increasing carborane concentration, together with a decreased mobility. The same discontinuities of both correlation time and order parameter with respect to temperature variations were observed in carborane-containing and carborane-free liposomes. This suggested that a homogeneous dispersion of nitroxides and carboranes occurred in the liposome bilayer. The ESR line shape analysis proved that no dramatic changes were induced in the liposome environment by carborane insertion. QELS data showed that the overall liposome structure was preserved, with a slight decrease in the mean hydrodynamic radius and increase in polydispersity caused by the guest molecules.

Lipid membranes with grafted polymers: physicochemical aspects

Membranes grafted with water-soluble polymers resist protein adsorption and adhesion to cellular surfaces. Liposomes with surface-grafted polymers therefore find applications in drug delivery. The physicochemical properties of polymer-grafted lipid membranes are reviewed with mean-field and scaling theories from polymer physics. Topics covered are: mushroom-brush transitions, membrane expansion and elasticity, bilayer-micelle transitions, membrane-membrane interactions and protein-membrane interactions.

Shifts in chain-melting transition temperature of liposomal membranes by polymer-grafted lipids

The chain-melting transition temperature of dipalmitoyl phosphatidylcholine (DPPC) bilayer membranes containing poly(ethylene glycol)-grafted dipalmitoyl phosphatidylethanolamine (PEG-DPPE) was determined by optical turbidity measurements. The dependence on content, Xp, of PEG-DPPE lipid was studied for different polar headgroup sizes, np, of the polymer lipid, throughout the lamellar phase of the mixtures with DPPC. Mean-field theory for the polymer brush regime predicts that the downward shift in transition temperature should vary with polymer size and content as npXp(5/3) (approximately npXp(11/6) for scaling theory). Any shift induced by the charge on PEG-lipids is independent of polymer size. These predictions are reasonably borne out for the longer polymer lipids (PEG molecular masses 750, 2000 and 5000 Da). Transition temperature shifts in the lamellar phase, before the onset of micellisation, are in the region of -1 to -2 degrees C (+/-0.1-0.2 degrees C) in reasonable accord with theoretical estimates of the lateral pressure exerted by the polymer brush. Shifts of this size are significant to the design of liposomes for controlled release of contents by mild hyperthermia.