Amphotericin B interactions with a DOPC monolayer. Electrochemical investigations

Interaction between polyene antifungal drug and saturated phospholipid monolayer regulated by calcium ions at the air-water interface

Amphotericin B (AmB) is a polyene antifungal drug, which could directly form pores on the sterol-free phospholipid monolayers. The interaction between AmB and phospholipid can be affected by calcium ions, but the mechanism is still unclear. DPPC is a saturated phospholipid with -PC group, which is often used to simulate the outer cell membrane leaflet. And DPPC is also the main constituent of pulmonary surfactants. In this work, the DPPC monolayer was used as a model membrane to study the effect of calcium ions on the interaction between AmB and phospholipid. The influence of different concentration of calcium ions on the elastic modulus, mean molecular area increment, excess Gibbs free energy and stability of the AmB/DPPC mixed monolayer has been researched at the surface pressure of 7.5 mN/m, 12.5 mN/m and 22.5 mN/m. The AmB/DPPC monolayers at the air-water interface have been observed in real-time by Brewster angle microscope and the microstructure of the Langmuir-Blodgett monolayer films transferred onto the mica have been researched by scanning electron microscope and atomic force microscope. The results showed that calcium ions had a significant influence on the elastic modulus, mean molecular area increment, excess Gibbs free energy, stability and microstructure of the AmB/DPPC monolayer. It has been indicated that the influence of calcium ions on the interaction between AmB and DPPC molecules mainly depended on the effect of calcium ions on the orientation of AmB molecules. The calcium ions could regulate the effect of AmB to the stability of the DPPC monolayer. This regulatory role changed with the different concentrations of calcium ions and the different phase states of the monolayer. This work provides useful information to further understand the influence mechanism of calcium ions on the interaction between AmB and saturated phospholipid with -PC group, which is helpful to find out the effect mechanism of calcium ion on the interaction between AmB and the outer layer of cell membrane or pulmonary surfactants in different phase states and to understand the toxicity mechanism of AmB on the cell membrane or lungs.

Electrochemical Response of Saccharomyces cerevisiae Corresponds to Cell Viability upon Exposure to Dioclea reflexa Seed Extracts and Antifungal Drugs

Dioclea reflexa bioactive compounds have been shown to contain antioxidant properties. The extracts from the same plant are used in traditional medical practices to treat various diseases with impressive outcomes. In this study, ionic mobility in Saccharomyces cerevisiae cells in the presence of D. reflexa seed extracts was monitored using electrochemical detection methods to link cell death to ionic imbalance. Cells treated with ethanol, methanol, and water extracts were studied using cyclic voltammetry and cell counting to correlate electrochemical behavior and cell viability, respectively. The results were compared with cells treated with pore-forming Amphotericin b (Amp b), as well as Fluconazole (Flu) and the antimicrobial drug Rifampicin (Rif). The D. reflexa seed water extract (SWE) revealed higher anodic peak current with 58% cell death. Seed methanol extract (SME) and seed ethanol extract (SEE) recorded 31% and 22% cell death, respectively. Among the three control drugs, Flu revealed the highest cell death of about 64%, whereas Amp b and Rif exhibited cell deaths of 35% and 16%, respectively, after 8 h of cell growth. It was observed that similar to SWE, there was an increase in the anodic peak current in the presence of different concentrations of Amp b, which also correlated with enhanced cell death. It was concluded from this observation that Amp b and SWE might follow similar mechanisms to inhibit cell growth. Thus, the individual bioactive compounds from the water extracts of D. reflexa seeds could further be purified and tested to validate their potential therapeutic application. The strategy to link electrochemical behavior to biochemical responses could be a simple, fast, and robust screening technique for new drug targets and to understand the mechanism of action of such drugs against disease models.

On the interaction of the highly charged peptides casocidins with biomimetic membranes

Casocidin I and II (CI and CII) are structurally related antimicrobial peptides made of 39 and 31 amino acids, respectively, which derive from natural proteolytic processing of α_s2-casein and adopt an ordered α-helical structure in biomimetic membranes. Their putative membrane-permeabilizing activity was investigated at Hg-supported self-assembled monolayers (SAMs) and at tethered bilayer lipid membranes (tBLMs); the latter consisted of a monolayer of 2,3,di-O-phytanyl-sn-glycerol-1-tetraethylene-glycol-d,l-α lipoic acid ester thiolipid (DPTL), with a dioleoylphosphatidylcholine (DOPC) or dioleoylphosphatidylserine (DOPS) monolayer on top of it. Interaction of CI and CII with these biomimetic membranes was studied by four electrochemical techniques at pH 3, 5.4 and 6.8. Peptide incorporation in tBLMs was attempted via scans of electrochemical impedance spectra. Experiments demonstrated that CI and CII penetrate SAMs as well as the distal DOPC monolayer of DPTL/DOPC tBLMs, but not the proximal phytanyl monolayer, with the only exception of CII at pH 5.4. Conversely, CII permeabilized DPTL/DOPS tBLMs to a moderate extent at all investigated pH values by forming holes across the membrane, but not ion channels. Structural distribution of charged residues seemed to prevent CII from having a hydrophobic side of the α-helix capable of stabilizing a regular ion channel in the lipid matrix.

Interaction Study of Phospholipid Membranes with an N-Glucosylated β-Turn Peptide Structure Detecting Autoantibodies Biomarkers of Multiple Sclerosis

The interaction of lipid environments with the type I’ β-turn peptide structure called CSF114 and its N-glucosylated form CSF114(Glc), previously developed as a synthetic antigenic probe recognizing specific autoantibodies in a subpopulation of multiple sclerosis patients’ serum, was investigated by fluorescence spectroscopy and electrochemical experiments using large unilamellar vesicles, mercury supported lipid self-assembled monolayers (SAMs) and tethered bilayer lipid membranes (tBLMs). The synthetic antigenic probe N-glucosylated peptide CSF114(Glc) and its unglucosylated form interact with the polar heads of lipid SAMs of dioleoylphosphatidylcholine at nonzero transmembrane potentials, probably establishing a dual electrostatic interaction of the trimethylammonium  and phosphate groups of the phosphatidylcholine polar head with the Glu⁵ and His⁹ residues on the opposite ends of the CSF114(Glc) β-turn encompassing residues 6-9. His⁹ protonation at pH 7 eliminates this dual interaction. CSF114(Glc) is adsorbed on top of SAMs of mixtures of dioleoylphosphatidylcholine with sphingomyelin, an important component of myelin, whose proteins are hypothesized to undergo an aberrant N-glucosylation triggering the autoimmune response. Incorporation of the type I’ β-turn peptide structure CSF114 into lipid SAMs by potential scans of electrochemical impedance spectroscopy induces defects causing a slight permeabilization toward cadmium ions. The N-glucopeptide CSF114(Glc) does not affect  tBLMs to a detectable extent.

Dermcidin, an anionic antimicrobial peptide: influence of lipid charge, pH and Zn2+ on its interaction with a biomimetic membrane

The mechanism of membrane permeabilization by dermcidin (DCD-1L), an antimicrobial peptide present in human sweat, was investigated at a mercury-supported monolayer of dioleoylphosphatidylcholine (DOPC) or dioleoylphosphatidylserine (DOPS) and at a mercury-supported tethered bilayer lipid membrane (tBLM) consisting of a thiolipid (DPTL) with a DOPC or DOPS monolayer self-assembled on top of it. In an unbuffered solution of pH 5.4, DCD-1L is almost neutral and permeabilizes a DPTL/DOPS tBLM at transmembrane potentials, ϕtrans, which are physiological. In a pH 7 buffer solution DCD-1L bears two negative charges and has no effect on a DPTL/DOPC tBLM, whereas it permeabilizes a DPTL/DOPS tBLM only outside the physiological ϕtrans range; however, the presence of zinc ion induces DCD-1L to permeabilize the DPTL/DOPS tBLM at physiological ϕtrans values. The effect of zinc ions suggests a DCD-1L conformation with its positive N-terminus embedded in the lipid bilayer and the negative C terminus floating on the membrane surface. This conformation can be stabilized by a zinc ion bridge between the His(38) residue of the C terminus and the carboxyl group of DOPS. Chronocoulometric potential jumps from ϕtrans ≅ +160 mV to sufficiently negative values yield charge transients exhibiting a sigmoidal shape preceded by a relatively long "foot". This behavior is indicative of ion-channel formation characterized by disruption of DCD-1L clusters adsorbed on top of the lipid bilayer, incorporation of the resulting monomers and their aggregation into hydrophilic pores by a mechanism of nucleation and growth.

Mercury-supported biomimetic membranes for the investigation of antimicrobial peptides

Tethered bilayer lipid membranes (tBLMs) consist of a lipid bilayer interposed between an aqueous solution and a hydrophilic "spacer" anchored to a gold or mercury electrode. There is great potential for application of these biomimetic membranes for the elucidation of structure-function relationships of membrane peptides and proteins. A drawback in the use of mercury-supported tBLMs with respect to gold-supported ones is represented by the difficulty in applying surface sensitive, spectroscopic and scanning probe microscopic techniques to gather information on the architecture of these biomimetic membranes. Nonetheless, mercury-supported tBLMs are definitely superior to gold-supported biomimetic membranes for the investigation of the function of membrane peptides and proteins, thanks to a fluidity and lipid lateral mobility comparable with those of bilayer lipid membranes interposed between two aqueous phases (BLMs), but with a much higher robustness and resistance to electric fields. The different features of mercury-supported tBLMs reconstituted with functionally active membrane proteins and peptides of bacteriological or pharmacological interest may be disclosed by a judicious choice of the most appropriate electrochemical techniques. We will describe the way in which electrochemical impedance spectroscopy, potential-step chronocoulometry, cyclic voltammetry and phase-sensitive AC voltammetry are conveniently employed to investigate the structure of mercury-supported tBLMs and the mode of interaction of antimicrobial peptides reconstituted into them.

Bulk manufacture of concentrated oxygen gas-filled microparticles for intravenous oxygen delivery

Self-assembling, concentrated, lipid-based oxygen microparticles (LOMs) have been developed to administer oxygen gas when injected intravenously, preventing organ injury and death from systemic hypoxemia in animal models. Distinct from blood substitutes, LOMs are a one-way oxygen carrier designed to rescue patients who experience life-threatening hypoxemia, as caused by airway obstruction or severe lung injury. Here, we describe methods to manufacture large quantities of LOMs using an in-line, recycling, high-shear homogenizer, which can create up to 4 liters of microparticle emulsion in 10 minutes, with particles containing a median diameter of 0.93 microns and 60 volume% of gas phase. Using this process, we screen 30 combinations of commonly used excipients for their ability to form stable LOMs. LOMs composed of DSPC and cholesterol in a 1:1 molar ratio are stable for a 100 day observation period, and the number of particles exceeding 10 microns in diameter does not increase over time. When mixed with blood in vitro, LOMs fully oxygenate blood within 3.95 seconds of contact, and do not cause hemolysis or complement activation. LOMs can be manufactured in bulk by high shear homogenization, and appear to have a stability and size profile which merit further testing.

Amphotericin B-loaded poly(ethylene glycol)-poly(lactide) micelles: preparation, freeze-drying, and in vitro release

Polymeric micelles prepared from a series of poly(ethylene glycol)-poly(lactide) (PEG-PLA) diblock copolymers with various PLA chain lengths were designed as drug carriers for water insoluble drug amphotericin B (AmB). Physicochemical properties of AmB-loaded micelles were evaluated. Micelles were freeze-dried to obtain long-time stable formulations. The redispersibility of the freeze-dried samples was poor when the weight ratio of PLA block was bigger than the PEG block of the copolymer. Various types of lyoprotectants including saccharides and PEGs with different molecular weight were tested to improve the redispersion performance of the freeze-dried samples. PEG was proved to be more effective than saccharides on stabilizing the micelles during lyophilization when the weight ratio of PLA block was bigger than PEG block. The sustained release in vitro of AmB was evidenced. About 80% of AmB was released in 80 h. The in vitro release behavior could be best described by the first-order equation. The release rate was reduced as enhancing PLA chain length due to the stronger interaction between poorly water-soluble AmB and longer hydrophobic chain length of PLA.