Lag-burst kinetics in phospholipase A(2) hydrolysis of DPPC bilayers visualized by atomic force microscopy

Persistent organic pollutants in model fungal membranes. Effects on the activity of phospholipases

Soils are the final sink for multiple organic pollutants emitted to the environment. Some of these chemicals which are toxic, recalcitrant and can bioaccumulate in living organism and biomagnify in trophic chains are classified persistent organic pollutants (POP). Vast areas of arable land have been polluted by POPs and the only economically possible means of decontamination is bioremediation, that is the utilization of POP-degrading microbes. Especially useful can be non-ligninolytic fungi, as their fast-growing mycelia can reach POP molecules strongly bond to soil minerals or humus fraction inaccessible to bacteria. The mobilized POP molecules are incorporated into the fungal plasma membrane where their degradation begins. The presence of POP molecules in the membranes can change their physical properties and trigger toxic effects to the cell. To avoid these phenomena fungi can quickly remodel the phospholipid composition of their membrane with employing different phospholipases and acyltransferases. However, if the presence of POP downregulates the phospholipases, toxic effects and the final death of microbial cells are highly probable. In our studies we applied multicomponent Langmuir monolayers with their composition mimicking fungal plasma membranes and studied their interactions with two different microbial phospholipases: phospholipase C (α-toxin) and phospholipase A1 (Lecitase ultra). The model membranes were doped with selected POPs that are frequently found in contaminated soils. It turned out that most of the employed POPs do not downregulate considerably the activity of phospholipases, which is a good prognostics for the application of non-ligninolytic fungi in bioremediation.

sPLA2 Wobbles on the Lipid Bilayer between Three Positions, Each Involved in the Hydrolysis Process

Secreted phospholipases A2 (sPLA2s) are peripheral membrane enzymes that hydrolyze phospholipids in the sn-2 position. The action of sPLA2 is associated with the work of two active sites. One, the interface binding site (IBS), is needed to bind the enzyme to the membrane surface. The other one, the catalytic site, is needed to hydrolyze the substrate. The interplay between sites, how the substrate protrudes to, and how the hydrolysis products release from, the catalytic site remains in the focus of investigations. Here, we report that bee venom PLA2 has two additional interface binding modes and enzyme activity through constant switching between three different orientations (modes of binding), only one of which is responsible for substrate uptake from the bilayer. The finding was obtained independently using atomic force microscopy and molecular dynamics. Switching between modes has biological significance: modes are steps of the enzyme moving along the membrane, product release in biological milieu, and enzyme desorption from the bilayer surface.

Membrane composition and successful bioaugmentation. Studies of the interactions of model thylakoid and plasma cyanobacterial and bacterial membranes with fungal membrane-lytic enzyme Lecitase ultra

Cyanobacterial/bacterial consortia are frequently inoculated to soils to increase the soil fertility and to accelerate the biodegradation of organic pollutants. Moreover, such consortia can also be successfully applied in landfills especially for the biodegradation of plastic wastes. However, the bioaugmentation techniques turn out frequently inefficient due to the competition of the indigenous microorganisms attacking directly these inoculated or secreting to their surroundings cell wall and membrane-lytic enzymes. It can be hypothesized that the resistance of the microbial membrane to the enzymatic degradation is correlated with its lipid composition. To verify this hypothesis glycolipid and phospholipid Langmuir monolayers were applied as models of thylakoid and plasma cyanobacterial and bacterial membranes. Hybrid fungal enzyme Lecitase ultra joining the activity of lipase and phospholipase A1 was applied as the model of fungal membrane-lytic enzyme. It turned out that anionic thylakoid lipids sulfoquinovosyldiacylglycerol and phosphatidylglycerols were the main targets of Lecitase ultra in the model multicomponent thylakoid membranes. The resistance of the model plasma bacterial membranes to enzymatic degradation depended significantly to their composition. The resistance increased generally when the unsaturated lipids were exchanged to their saturated counterparts. However, most resistant turned out the membranes composed of unsaturated phosphatidylamine and saturated anionic phospholipids.

Washing Performance of Detergent Formulations with Sodium Oxalate as Builder in Presence of Different Enzymes

In this work, we have investigated the washing performance of sodium oxalate-based detergents containing different enzymes (protease, lipase and cellulase). The results show that sodium oxalate-based detergents with enzymes have a better washing performance than formulations containing the conventional builder STPP and zeolite 4A. For sodium oxalate-based with protease, the amount of sodium oxalate and protease have a significant effect on the detergency. Lipase can improve detergency of sodium oxalate-based detergents after “first washing” in the presence of different anionic surfactant (LAS, MES and AES). For cellulase, only sodium oxalate in the presence of LAS has a detergency increase.

Illustrating Interfacial Interaction between Honey Bee Venom Phospholipase A2 and Supported Negatively Charged Lipids with Sum Frequency Generation and Laser Scanning Confocal Microscopy

Phospholipase A₂ is an important enzyme species which can widely be found in animals, plants, bacteria, and so on. A large number of studies have shown that phospholipase A₂ is highly catalytic toward the lipids. Here, sum frequency generation (SFG) vibrational spectroscopy and laser scanning confocal microscopy (LSCM) were applied to study the interaction between honey bee venom phospholipase A₂ (bvPLA₂) and the negatively charged DPPG bilayer. In both cases without and with the calcium ions (Ca²⁺), the bvPLA₂ molecules were adsorbed onto the outer leaflet surface with the orientational order, and the adsorbed bvPLA₂ molecules damaged the order of the packed outer leaflet. In comparison to the case without Ca²⁺, the addition of Ca²⁺ can accelerate the attaching process of bvPLA₂ to the outer leaflet surface and decelerate the process of damaging the outer leaflet order. The experimental result also confirmed, with the help of the Ca²⁺, the DPPG molecules in the outer leaflet were hydrolyzed, with both hydrolysates, that is, lysophospholipids and fatty acids, remaining at the interface, showing a distinct difference from previous published literatures regarding neutral lipids [Phys. Chem. Chem. Phys. 2018, 20, 63-67] and PLA₁ [Langmuir 2019, 35, 12831-12838].

The role of phospholipid composition and ergosterol presence in the adaptation of fungal membranes to harsh environmental conditions-membrane modeling study

Soil fungi play an important role in the environment decomposing dead organic matter and degrading persistent organic pollutants (POP). The presence of hydrophobic POP in the soil and membrane-lytic substances excreted by competing microorganism to the soil solution is the constant threat to these organisms. To survive in the harsh environment and counteract these hazards the fungal cells have to strictly control the composition of the lipids in their cellular membranes. However, in the case of fungal membranes the correlation between their composition and physical properties is not fully understood. In our studies we applied Langmuir monolayers formed by phospholipids typical to fungal membranes and ergosterol as versatile model membranes. These membranes were characterized by the Langmuir technique, Brewster Angle Microscopy and Grazing Incidence X-ray Diffraction, as well as were exposed to the action of phospholipase A2 treated as a model membrane-lytic protein. We started our studies from the equimolar mixture of phosphatidylethanolamine with phosphatidylcholine and doped this matrix with phosphatidylserine (PS) or phosphatidylinositol (PI). It turned out that the membranes with PS were much more condensed at the mesoscale and periodically organized at the molecular level. Starting from these models we derived two families of model fungal membranes adding to these phospholipid matrices ergosterol. It turned out that the level of ergosterol content is of crucial importance for the model membrane structure and its durability. Changing the ergosterol mole ratio from 0 to 0.5 we defined and described in detail four different 2D crystalline phases.

Lysophospholipids Facilitate COPII Vesicle Formation

Coat protein complex II (COPII) proteins form vesicles from the endoplasmic reticulum to export cargo molecules to the Golgi apparatus. Among the many proteins involved in this process, Sec12 is a key regulator, functioning as the guanosine diphosphate (GDP) exchange factor for Sar1p, the small guanosine triphosphatase (GTPase) that initiates COPII assembly. Here we show that overexpression of phospholipase B3 in the thermosensitive sec12-4 mutant partially restores growth and protein transport at non-permissive temperatures. Lipidomics analyses of these cells show a higher content of lysophosphatidylinositol (lysoPI), consistent with the lipid specificity of PLB3. Furthermore, we show that lysoPI is specifically enriched in COPII vesicles isolated from in vitro budding assays. As these results suggested that lysophospholipids could facilitate budding under conditions of defective COPII coat dynamics, we reconstituted COPII binding onto giant liposomes with purified proteins and showed that lysoPI decreases membrane rigidity and enhances COPII recruitment to liposomes. Our results support a mechanical facilitation of COPII budding by lysophospholipids.

•

COPII mutant sec12-4 is rescued by the overexpression of an ER resident phospholipase

•

Lipidomic analysis of COPII vesicles shows enrichment in lysophospholipids

•

Recruitment of COPII proteins to liposomes increases in presence of lysophospholipids

•

Lysophosphatidylinositol lowers the rigidity of membranes in vitro

Nonspecific Binding Domains in Lipid Membranes Induced by Phospholipase A2

Phospholipase A2 (PLA2) is a peripheral membrane protein that can hydrolyze phospholipids to produce lysolipids and fatty acids. It has been found to play crucial roles in various cellular processes and is thought as a potential candidate for triggering drug release from liposomes for medical treatment. Here, we directly observed that PLA2 hydrolysis reaction can induce the formation of PLA2-binding domains at lipid bilayer interface and found that the formation was significantly influenced by the fluidity of the lipid bilayer. We prepared supported lipid bilayers (SLBs) with various molar ratios of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) to adjust the reactivity and fluidity of the lipid bilayers. A significant amount of the PLA2-induced domains was observed in mixtures of DPPC and DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine) but not in either pure DPPC or pure DOPC bilayer, which might be the reason that previous studies rarely observed these domains in lipid bilayer systems. The fluorescently labeled PLA2 experiment showed that newly formed domains acted as binding templates for PLA2. The AFM result showed that the induced domain has stepwise plateau structure, suggesting that PLA2 hydrolysis products may align as bilayers and accumulate layer by layer on the support, and the hydrophobic acyl chains at the side of the layer structure may be exposed to the outside aqueous environment. The introduced hydrophobic region could have hydrophobic interactions with proteins and therefore can attract the binding of not only PLA2 but also other types of proteins such as proteoglycans and streptavidin. The results suggest that the formation of PLA2-induced domains may convert part of a zwitterionic nonsticky lipid membrane to a site where biomolecules can nonspecifically bind.

Membrane remodeling processes induced by phospholipase action

Important cellular events such as division require drastic changes in the shape of the membrane. These remodeling processes can be triggered by the binding of specific proteins or by changes in membrane composition and are linked to phospholipid metabolism for which dedicated enzymes, named phospholipases, are responsible. Here wide-field fluorescence microscopy is used to visualize shape changes induced by the action of phospholipase A1 on dye-labeled supported membranes of POPC (1-palmitoyl-2-oleoly-sn-glycero-3-phosphocholine). Time-lapse imaging demonstrates that layers either shrink and disappear or fold and collapse into vesicles. These vesicles can undergo further transformations such as budding, tubulation, and pearling within 5 min of formation. Using dye-labeled phospholipases, we can monitor the presence of the enzyme at specific positions on the membrane as the shape transformations occur. Furthermore, incorporating the products of hydrolysis into POPC membranes is shown to induce transformations similar to those observed for enzyme action. The results suggest that phospholipase-mediated hydrolysis plays an important role in membrane transformations by altering the membrane composition, and a model is proposed for membrane curvature based on the presence and shape of hydrolysis products.

Membrane restructuring by phospholipase A2 is regulated by the presence of lipid domains

Secretory phospholipase A(2) (sPLA(2)) catalyzes the hydrolysis of glycerophospholipids. This enzyme is sensitive to membrane structure, and its activity has been shown to increase in the presence of liquid-crystalline/gel (L(α)/L(β)) lipid domains. In this work, we explore whether lipid domains can also direct the activity of the enzyme by inducing hydrolysis of certain lipid components due to preferential activity of the enzyme toward lipid domains susceptible to sPLA(2). Specifically, we show that the presence of L(α)/L(β) and L(α)/P(β') phase coexistence in a 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/1,2 distearoyl-sn-glycero-3-phosphocholine (DSPC) system results in the preferential hydrolysis of the shorter-chained lipid component in the mixture, leading to an enrichment in the longer-chained component. The restructuring process is monitored by atomic force microscopy on supported single and double bilayers formed by vesicle fusion. We observe that during preferential hydrolysis of the DMPC-rich L(α) regions, the L(β) and P(β') regions grow and reseal, maintaining membrane integrity. This result indicates that a sharp reorganization of the membrane structure can occur during sPLA(2) hydrolysis without necessarily destroying the membrane. We confirm by high-performance liquid chromatography the preferential hydrolysis of DMPC within the phase coexistence region of the DMPC/DSPC phase diagram, showing that this preferential hydrolysis is accentuated close to the solidus phase boundary. Differential scanning calorimetry results show that this preferential hydrolysis in the presence of lipid domains leads to a membrane system with a higher-temperature melting profile due to enrichment in DSPC. Together, these results show that the presence of lipid domains can induce specificity in the hydrolytic activity of the enzyme, resulting in marked differences in the physical properties of the membrane end-product.

Magnetoliposomes as magnetic resonance imaging contrast agents

Among the wide variety in iron oxide nanoparticles which are routinely used as magnetic resonance imaging (MRI) contrast agents, magnetoliposomes (MLs) take up a special place. In the present work, the two main types (large and small MLs) are defined and their specific features are commented. For both types of MLs, the flexibility of the lipid coating allows for efficient functionalization, enabling bimodal imaging (e.g., MRI and fluorescence) or the use of MLs as theranostics. These features are especially true for large MLs, where several magnetite cores are encapsulated within a single large liposome, which were found to be highly efficient theranostic agents. By carefully fine-tuning the number of magnetite cores and attaching Gd(3+) -complexes onto the liposomal surface, the large MLs can be efficiently optimized for dynamic MRI. A special type of MLs, biogenic MLs, can also be efficiently used in this regard, with potential applications in cancer treatment and imaging. Small MLs, where the lipid bilayer is immediately attached onto a solid magnetite core, give a very high r2 /r1 ratio. The flexibility of the lipid bilayer allows the incorporation of poly(ethylene glycol)-lipid conjugates to increase blood circulation times and be used as bone marrow contrast agents. Cationic lipids can also be incorporated, leading to high cell uptake and associated strong contrast generation in MRI of implanted cells. Unique for these small MLs is the high resistance the particles exhibit against intracellular degradation compared with dextran- or citrate-coated particles. Additionally, intracellular clustering of the iron oxide cores enhances negative contrast generation and enables longer tracking of labeled cells in time.

Comparison of n-tetradecane/electrolyte emulsions properties stabilized by DPPC and DPPC vesicles in the electrolyte solution

The properties of n-tetradecane/electrolyte emulsions with DPPC or DPPC vesicles in the electrolyte solution were investigated. The DPPC molecules form different aggregates, which possess different surface affinity, size and structure, and therefore we assumed some differences in the adsorption at the oil droplet/water interface. The n-tetradecane emulsions in 1:1, 1:2 and 1:3 electrolytes were prepared by mechanical stirring in the presence of DPPC at natural pH. Electrokinetic properties of the systems were investigated taking into account the effective diameter and multimodal size distribution of the droplets as well as the zeta potentials using the dynamic light scattering technique. The zeta potential of the droplets was negative in all systems with NaCl. In the emulsions with CaCl(2) at a higher concentration of electrolyte and emulsions with LaCl(3) with all investigated concentrations, positive values were observed. Similar measurements were performed for DPPC vesicles in the electrolyte solution. The pH and ionic strength changes induce those in the electrical charge of DPPC layer or vesicle surface. This is due to the fact that the DPPC molecule contains -PO(-) and -N(CH(3))(3) groups, which are in equilibrium with H(+) and OH(-), as well as other ions present in the solution, i.e. Na(+), Ca(2+), La(3+) or Cl(-). In the n-tetradecane/electrolyte emulsion stabilized by DPPC or DPPC vesicles the zeta potential may be also related to acid-base interactions. The effect of the ions from the solution on the DPPC layer adsorbed on n-tetradecane droplets or DPPC vesicles is discussed.

Influence of lipid heterogeneity and phase behavior on phospholipase A2 action at the single molecule level

We monitored the action of phospholipase A(2) (PLA(2)) on L- and D-dipalmitoyl-phosphatidylcholine (DPPC) Langmuir monolayers by mounting a Langmuir-trough on a wide-field fluorescence microscope with single molecule sensitivity. This made it possible to directly visualize the activity and diffusion behavior of single PLA(2) molecules in a heterogeneous lipid environment during active hydrolysis. The experiments showed that enzyme molecules adsorbed and interacted almost exclusively with the fluid region of the DPPC monolayers. Domains of gel state L-DPPC were degraded exclusively from the gel-fluid interface where the buildup of negatively charged hydrolysis products, fatty acid salts, led to changes in the mobility of PLA(2). The mobility of individual enzymes on the monolayers was characterized by single particle tracking. Diffusion coefficients of enzymes adsorbed to the fluid interface were between 3.2 microm(2)/s on the L-DPPC and 4.9 microm(2)/s on the D-DPPC monolayers. In regions enriched with hydrolysis products, the diffusion dropped to approximately 0.2 microm(2)/s. In addition, slower normal and anomalous diffusion modes were seen at the L-DPPC gel domain boundaries where hydrolysis took place. The average residence times of the enzyme in the fluid regions of the monolayer and on the product domain were between approximately 30 and 220 ms. At the gel domains it was below the experimental time resolution, i.e., enzymes were simply reflected from the gel domains back into solution.

Effect of phospholipase A2 hydrolysis products on calcium oxalate precipitation at lipid interfaces

Urinary stones are commonly composed of an inorganic component, calcium oxalate, or calcium phosphate and an organic matrix of lipids, carbohydrates, and proteinaceous matter. Of interest is the role that the organic matrix elements may play as catalysts for the heterogeneous nucleation of the calcium salts, and a number of studies have examined the role of lipids in calcium oxalate monohydrate (COM) formation. In this study, products of lipid hydrolysis from phospholipase A(2) (PLA(2)) are examined for their effect on COM formation using Langmuir monolayers as model lipid membrane assemblies. The enzyme PLA(2) hydrolyzes DPPC monolayers in the presence of a supersaturated calcium oxalate subphase, inducing the rapid and plentiful nucleation of calcium oxalate at the lipid interface. To investigate the cause of increased crystal formation in the presence of the enzyme, Langmuir monolayers modeling the hydrolysis products were investigated. Calcium oxalate crystal growth at a ternary monolayer of dipalmitoylphosphatidylcholine (DPPC), palmitic acid (PA), and a 22-carbon chain lysophospholipid (22:0 Lyso PC) dramatically increases relative to monolayers of just DPPC. Binary monolayers of DPPC with either PA or the 22:0 Lyso PC and single-component monolayers of PA were also studied. It is demonstrated that the fatty acid generated during lipid hydrolysis causes a significant increase in the extent of heterogeneous nucleation of calcium oxalate from supersaturated solutions. The results imply a possible link between increased phospholipase activity, which is associated with hyperoxaluria, and calcium oxalate precipitation.

Interfacial binding dynamics of bee venom phospholipase A2 investigated by dynamic light scattering and quartz crystal microbalance

Bee venom phospholipase A(2) (bvPLA(2)) is part of the secretory phospholipase A(2) (sPLA(2)) family whose members are active in biological processes such as signal transduction and lipid metabolism. While controlling sPLA(2) activity is of pharmaceutical interest, the relationship between their mechanistic actions and physiological functions is not well understood. Therefore, we investigated the interfacial binding process of bvPLA(2) to characterize its biophysical properties and gain insight into how membrane binding affects interfacial activation. Attention was focused on the role of membrane electrostatics in the binding process. Although dynamic light scattering experiments indicated that bvPLA(2) does not lyse lipid vesicles, a novel, nonhydrolytic activity was discovered. We employed a supported lipid bilayer platform on the quartz crystal microbalance with dissipation sensor to characterize this bilayer-disrupting behavior and determined that membrane electrostatics influence this activity. The data suggest that (1) adsorption of bvPLA(2) to model membranes is not primarily driven by electrostatic interactions; (2) lipid desorption can follow bvPLA(2) adsorption, resulting in nonhydrolytic bilayer-disruption; and (3) this desorption is driven by electrostatic interactions. Taken together, these findings provide evidence that interfacial binding of bvPLA(2) is a dynamic process, shedding light on how membrane electrostatics can modulate interfacial activation.

Methods for detection and characterization of lipases: A comprehensive review

Microbial lipases are very prominent biocatalysts because of their ability to catalyze a wide variety of reactions in aqueous and non-aqueous media. The chemo-, regio- and enantio-specific behaviour of these enzymes has caused tremendous interest among scientists and industrialists. Lipases from a large number of bacterial, fungal and a few plant and animal sources have been purified to homogeneity. This article presents a critical review of different strategies which have been employed for the detection, purification and characterization of microbial lipases.

Kinetics membrane disruption due to drug interactions of chlorpromazine hydrochloride

Drug-membrane interactions assume considerable importance in pharmacokinetics and drug metabolism. Here, we present the interaction of chlorpromazine hydrochloride (CPZ) with supported phospholipid bilayers. It was demonstrated that CPZ binds rapidly to phospholipid bilayers, disturbing the molecular ordering of the phospholipids. These interactions were observed to follow first order kinetics, with an activation energy of approximately 420 kJ mol(-1). Time-dependent membrane disruption was also observed for the interaction with CPZ, such that holes appeared in the phospholipid bilayer after the interaction of CPZ. For this process of membrane disruption, "lag-burst" kinetics was demonstrated.

Effect of temperature on n-tetradecane emulsion in the presence of phospholipid DPPC and enzyme lipase or phospholipase A2

Zeta potentials and effective diameters of n-tetradecane emulsions in 1 M ethanol were investigated in the presence of 1,2-dipalmitoyl- sn-glycero-3-phosphocholine (DPPC) (1 mg/100 mL), Candida cylindracea lipase (CCL), and phospholipase PLA2 (1 mg/100 mL) at 20, 37, and 45 degrees C. The enzyme was added at the beginning of mechanical emulsion homogenization or 1 min before the end of stirring for 10 min at 10,000 rpm. It was found that DPPC decreases the negative zeta potentials at all three temperatures. The decrease was largest at 20 degrees C and smallest at 45 degrees C. The influence of the enzymes on the zeta potentials depended on the enzyme kind, time of its injection, and temperature. More negative values of the zeta potentials relative to n-C14H30/DPPC droplets were obtained if the lipase was present. Generally, the effective diameters correlate with the zeta potentials, i.e., lower zeta potential corresponds with bigger effective diameter. Possible reasons for the observed changes of the measured parameters are discussed.

Activation of phospholipase A2 by ternary model membranes

Formation of liquid-ordered domains in model membranes can be linked to raft formation in cellular membranes. The lipid stoichiometry has a governing influence on domain formation and consequently, biochemical hydrolysis of specific lipids has the potential to remodel domain features. Activation of phospholipase A(2) (PLA(2)) by ternary model membranes with three components (DOPC/DPPC/Cholesterol) can potentially change the domain structure by preferential hydrolysis of the phospholipids. Using fluorescence microscopy, this work investigates the changes in domain features that occur upon PLA(2) activation by such ternary membranes. Double-supported membranes are used, which have minimal interactions with the solid support. For membranes prepared in the coexistence region, PLA(2) induces a decrease of the liquid-disordered (L(d)) phase and an increase of the liquid-ordered (L(o)) phase. A striking observation is that activation by a uniform membrane in the L(d) phase leads to nucleation and growth of L(o)-like domains. This phenomenon relies on the initial presence of cholesterol and no PLA(2) activation is observed by membranes purely in the L(o) phase. The observations can be rationalized by mapping partially hydrolyzed islands onto trajectories in the phase diagram. It is proposed that DPPC is protected from hydrolysis through interactions with cholesterol, and possibly the formation of condensed complexes. This leads to specific trajectories which can account for the observed trends. The results demonstrate that PLA(2) activation by ternary membrane islands may change the global lipid composition and remodel domain features while preserving the overall membrane integrity.

Distribution of reaction products in phospholipase A2 hydrolysis

We have monitored the composition of supported phospholipid bilayers during phospholipase A(2) hydrolysis using specular neutron reflection and ellipsometry. Porcine pancreatic PLA(2) shows a long lag phase of several hours during which the enzyme binds to the bilayer surface, but only 5+/-3% of the lipids react before the onset of rapid hydrolysis. The amount of PLA(2), which resides in a 21+/-1 A thick layer at the water-bilayer interface, as well as its depth of penetration into the membrane, increase during the lag phase, the length of which is also proportional to the enzyme concentration. Hydrolysis of a single-chain deuterium labelled d(31)-POPC reveals for the first time that there is a significant asymmetry in the distribution of the reaction products between the membrane and the aqueous environment. The lyso-lipid leaves the membrane while the number of PLA(2) molecules bound to the interface increases with increasing fatty acid content. These results constitute the first direct measurement of the membrane structure and composition, including the location and amount of the enzyme during hydrolysis. These are discussed in terms of a model of fatty-acid mediated activation of PLA(2).

Ca2+-induced phase separation in the membrane of palmitate-containing liposomes and its possible relation to membrane permeabilization

A Ca(2+)-induced phase separation of palmitic acid (PA) in the membrane of azolectin unilamellar liposomes has been demonstrated with the fluorescent membrane probe nonyl acridine orange (NAO). It has been shown that NAO, whose fluorescence in liposomal membranes is quenched in a concentration-dependent way, can be used to monitor changes in the volume of lipid phase. The incorporation of PA into NAO-labeled liposomes increased fluorescence corresponding to the expansion of membrane. After subsequent addition of Ca(2+), fluorescence decreased, which indicated separation of PA/Ca(2+) complexes into distinct membrane domains. The Ca(2+)-induced phase separation of PA was further studied in relation to membrane permeabilization caused by Ca(2+) in the PA-containing liposomes. A supposition was made that the mechanism of PA/Ca(2+)-induced membrane permeabilization relates to the initial stage of Ca(2+)-induced phase separation of PA and can be considered as formation of fast-tightening lipid pores due to chemotropic phase transition in the lipid bilayer.

Hydrolysis characterization of phospholipid monolayers catalyzed by different phospholipases at the air-water interface

Combination of some newly developed microscopic and spectroscopic techniques with conventional Langmuir monolayer method can provide more quantitative information with the molecular orientation and reorganization process of spread amphiphilic molecules at the air/water interface. These techniques are extended to investigate the hydrolysis process of spreading lipid monolayer catalyzed by different enzymes, phospholipases A2, C and D, respectively. Synchrotron X-ray diffraction and infrared reflection absorption spectroscopy are able directly to give the structural information of the assembled monolayer, interfacial activity of amphiphiles and their components at the interface. Microscopic technique such as Brewster angle microscopy (BAM), fluorescence microscopy (FM) can be used to trace the morphological changes dynamically as the spreading lipid monolayer is hydrolyzed at the air/water interface. We summary here some latest progress in this filed and give a brief review over the hydrolysis features of phospholipid monolayer catalyzed by different enzymes. It is attempted to establish a model of membrane hydrolysis process in order to better understand the mechanism of membrane metabolism and signal transduction in a living system.