Na(+) transport, and the E(1)P-E(2)P conformational transition of the Na(+)/K(+)-ATPase

Kinetic contribution to extracellular Na+/K+ selectivity in the Na+/K+ pump

The sodium potassium pump (Na⁺,K⁺‐ATPase) shows a high selectivity for K⁺ over Na⁺ binding from the extracellular medium. To understand the K⁺ selectivity in the presence of a high concentration of competing Na⁺ ions requires consideration of more than just ion binding affinities. Here, equilibrium‐based calculations of the extracellular occupation of the Na⁺,K⁺‐ATPase transport sites by Na⁺ and K⁺ are compared to fluxes through Na⁺ and K⁺ transport pathways. The results show that, under physiological conditions, there is a 332‐fold selectivity for pumping of K⁺ from the extracellular medium into the cytoplasm relative to Na⁺, whereas equilibrium calculations alone predict only a 7.5‐fold selectivity for K⁺. Thus, kinetic effects make a major contribution to the determination of extracellular K⁺ selectivity.

Dipole-Potential-Mediated Effects on Ion Pump Kinetics

The kinetics of conformational changes of P-type ATPases necessary for the occlusion or deocclusion of transported ions are known to be sensitive to the composition of the surrounding membrane, e.g., phospholipid content, mole percentage of cholesterol, and the presence of lipid-bound anions. Research has shown that many membrane components modify the dipole potential of the lipid head-group region. Based on the observation that occlusion/deocclusion reactions of ion pumps perturb the membrane surrounding the protein, a mechanism is suggested whereby dipole potential modifiers induce preferential stabilization or destabilization of occluded or nonoccluded states of the protein, leading to changes in the forward and backward rate constants for the transition. The mechanism relies on the assumption that conformational changes of the protein are associated with changes in its hydrophobic thickness that requires a change in local lipid packing density to allow hydrophobic matching with the membrane. The changes in lipid packing density cause changes in local lipid dipole potential that are responsible for the dependence of conformational kinetics on dipole potential modifiers. The proposed mechanism has the potential to explain effects of lipid composition on the kinetics of any membrane protein undergoing significant changes in its membrane cross-sectional area during its activity.

Identification of electric-field-dependent steps in the Na(+),K(+)-pump cycle

The charge-transporting activity of the Na(+),K(+)-ATPase depends on its surrounding electric field. To isolate which steps of the enzyme's reaction cycle involve charge movement, we have investigated the response of the voltage-sensitive fluorescent probe RH421 to interaction of the protein with BTEA (benzyltriethylammonium), which binds from the extracellular medium to the Na(+),K(+)-ATPase's transport sites in competition with Na(+) and K(+), but is not occluded within the protein. We find that only the occludable ions Na(+), K(+), Rb(+), and Cs(+) cause a drop in RH421 fluorescence. We conclude that RH421 detects intramembrane electric field strength changes arising from charge transport associated with conformational changes occluding the transported ions within the protein, not the electric fields of the bound ions themselves. This appears at first to conflict with electrophysiological studies suggesting extracellular Na(+) or K(+) binding in a high field access channel is a major electrogenic reaction of the Na(+),K(+)-ATPase. All results can be explained consistently if ion occlusion involves local deformations in the lipid membrane surrounding the protein occurring simultaneously with conformational changes necessary for ion occlusion. The most likely origin of the RH421 fluorescence response is a change in membrane dipole potential caused by membrane deformation.

Electrophysiological characterization of membrane transport proteins

Active transport in biological membranes has been traditionally studied using a variety of biochemical and biophysical techniques, including electrophysiology. This review focuses on aspects of electrophysiological methods that make them particularly suited for the investigation of transporter function. Two major approaches to electrical recording of transporter activity are discussed: (a) artificial planar lipid membranes, such as the black lipid membrane and solid supported membrane, which are useful for studies on bacterial transporters and transporters of intracellular compartments, and (b) patch clamp and voltage clamp techniques, which investigate transporters in native cellular membranes. The analytical power of these methods is highlighted by several examples of mechanistic studies of specific membrane proteins, including cytochrome c oxidase, NhaA Na(+)/H(+) exchanger, ClC-7 H(+)/Cl(-) exchanger, glutamate transporters, and neutral amino acid transporters. These examples reveal the wealth of mechanistic information that can be obtained when electrophysiological methods are used in combination with rapid perturbation approaches.

Kinetic comparisons of heart and kidney Na+,K(+)-ATPases

Most kinetic measurements of the partial reactions of Na(+),K(+)-ATPase have been conducted on enzyme from mammalian kidney. Here we present a kinetic model that is based on the available equilibrium and kinetic parameters of purified kidney enzyme, and allows predictions of its steady-state turnover and pump current in intact cells as a function of ion and ATP concentrations and the membrane voltage. Using this model, we calculated the expected dependence of the pump current on voltage and extracellular Na(+) concentration. The simulations indicate a lower voltage dependence at negative potentials of the kidney enzyme in comparison with heart muscle Na(+),K(+)-ATPase, in agreement with experimental results. The voltage dependence is enhanced at high extracellular Na(+) concentrations. This effect can be explained by a voltage-dependent depopulation of extracellular K(+) ion binding sites on the E2P state and an increase in the proportion of enzyme in the E1P(Na(+))(3) state in the steady state. This causes a decrease in the effective rate constant for occlusion of K(+) by the E2P state and hence a drop in turnover. Around a membrane potential of zero, negligible voltage dependence is observed because the voltage-independent E2(K(+))(2) → E1 + 2K(+) transition is the major rate-determining step.

Charge transfer in P-type ATPases investigated on planar membranes

Planar lipid bilayers, e.g., black lipid membranes (BLM) and solid supported membranes (SSM), have been employed to investigate charge movements during the reaction cycle of P-type ATPases. The BLM/SSM method allows a direct measurement of the electrical currents generated by the cation transporter following chemical activation by a substrate concentration jump. The electrical current transients provides information about the reaction mechanism of the enzyme. In particular, the BLM/SSM technique allows identification of electrogenic steps which in turn may be used to localize ion translocation during the reaction cycle of the pump. In addition, using the high time resolution of the technique, especially when rapid activation via caged ATP is employed, rate constants of electrogenic and electroneutral steps can be determined. In the present review, we will discuss the main results obtained by the BLM and SSM methods and how they have contributed to unravel the transport mechanism of P-type ATPases.

Identification of potential regulatory sites of the Na+,K+-ATPase by kinetic analysis

Kinetic models are presented that allow the Na(+),K(+)-ATPase steady-state turnover number to be estimated at given intra- and extracellular concentrations of Na(+), K(+), and ATP. Based on experimental transient kinetic data, the models utilize either three or four steps of the Albers-Post scheme, that is, E(2) --> E(1), E(1) --> E(2)P (or E(1) --> E(1)P and E(1)P --> E(2)P), and E(2)P --> E(2), which are the major rate-determining steps of the enzyme cycle. On the time scale of these reactions, the faster binding steps of Na(+), K(+), and ATP to the enzyme are considered to be in equilibrium. Each model was tested by comparing calculations of the steady-state turnover from rate constants and equilibrium constants for the individual partial reactions with published experimental data of the steady-state activity at varying Na(+) and K(+) concentrations. To provide reasonable agreement between the calculations and the experimental data, it was found that Na(+)/K(+) competition for cytoplasmic binding sites was an essential feature required in the model. The activity was also very dependent on the degree of K(+)-induced stimulation of the reverse reaction E(1) --> E(2). Taking into account the physiological substrate concentrations, the models allow the most likely potential sites of short-term Na(+),K(+)-ATPase regulation to be identified. These were found to be (a) the cytoplasmic Na(+) and K(+) binding sites, via changes in Na(+) or K(+) concentration or their dissociation constants, (b) ATP phosphorylation (as a substrate), via a change in its rate constant, and (c) the position of the E(2)<==>E(1) equilibrium.

Functional consequences of alterations to Ile279, Ile283, Glu284, His285, Phe286, and His288 in the NH2-terminal part of transmembrane helix M3 of the Na+,K(+)-ATPase

Mutations Ile279 --> Ala, Ile283 --> Ala, Glu284 --> Ala, His285 --> Ala, His285 --> Lys, His285 --> Glu, Phe286 --> Ala, and His288 --> Ala in transmembrane helix M3 of the Na+,K(+)-ATPase were studied. Except for His285 --> Ala, these mutations were compatible with cell viability, permitting analysis of their effects on the overall and partial reactions of the Na+,K(+)-transport cycle. In Ile279 --> Ala and Ile283 --> Ala, the E1 form accumulated, whereas in His285 --> Lys and His285 --> Glu, E1P accumulated. Phe286 --> Ala displaced the conformational equilibria of dephosphoenzyme and phosphoenzyme in parallel in favor of E2 and E2P, respectively, and showed a unique enhancement of the E1P --> E2P transition rate. These effects suggest that M3 undergoes significant rearrangements in relation to E1-E2 and E1P-E2P conformational changes. Because the E1-E2 and E1P-E2P conformational equilibria were differentially affected by some of the mutations, the phosphorylated conformations seem to differ significantly from the dephospho forms in the M3 region. Mutation of His285 furthermore increased the Na(+)-activated ATPase activity in the absence of K+ ("Na(+)-ATPase activity"). Ile279 --> Ala, Ile283 --> Ala, and His288 --> Ala showed reduced Na+ affinity of the E1 form. The rate of Na(+)-activated phosphorylation from ATP was reduced in Ile279 --> Ala and Ile283 --> Ala, and these mutants showed evidence similar to Glu329 --> Gln of destabilization of the Na(+)-occluded state.

Dependence of Na+-K+ pump current-voltage relationship on intracellular Na+, K+, and Cs+ in rabbit cardiac myocytes

To examine effects of cytosolic Na+, K+, and Cs+ on the voltage dependence of the Na+-K+ pump, we measured Na+-K+ pump current (Ip) of ventricular myocytes voltage-clamped at potentials (Vm) from 100 to +60 mV. Superfusates were designed to eliminate voltage dependence at extracellular pump sites. The cytosolic compartment of myocytes was perfused with patch pipette solutions with a Na+ concentration ([Na]pip) of 80 mM and a K+ concentration from 0 to 80 mM or with solutions containing Na+ in concentrations from 0.1 to 100 mM and K+ in a concentration of either 0 or 80 mM. When [Na]pip was 80 mM, K+ in pipette solutions had a voltage-dependent inhibitory effect on Ip and induced a negative slope of the Ip-Vm relationship. Cs+ in pipette solutions had an effect on Ip qualitatively similar to that of K+. Increases in Ip with increases in [Na]pip were voltage dependent. The dielectric coefficient derived from [Na]pip-Ip relationships at the different test potentials was 0.15 when pipette solutions included 80 mM K+ and 0.06 when pipette solutions were K+ free.

Electrogenic properties of the Na+,K+-ATPase probed by presteady state and relaxation studies

Electrical measurements on planar lipid bilayers, patch/voltage clamp experiments, and spectroscopic investigations involving a potential sensitive dye are reviewed. These experiments were performed to analyze the kinetics of charge translocation of the Na+,K+-ATPase. High time resolution was achieved by applying caged ATP, voltage-jump, and stopped-flow techniques, respectively. Kinetic parameters and the electrogenicity of the relevant transitions in the Na+,K+-ATPase reaction cycle are discussed.

Extracellular pH modulates kinetics of the Na(+),K(+)-ATPase

To investigate effects of pH on the Na(+),K(+)-ATPase, we used the Xenopus oocytes to measure transient charge movements in the absence of extracellular K(+), and steady-state currents mediated by the pump as well as ATPase activity. The activity of purified Na(+), K(+)-ATPase strongly depends on pH, which has been attributed to protonation of intracellular sites. The steady-state current reflects pump activity, the transient charge movement voltage-dependent interaction of external Na(+) ions with the pump molecule and/or conformational changes during Na(+)/Na(+) exchange. The steady-state current exhibits a characteristic voltage dependence with maximum at about 0 mV at low external K(+) (< or =2 mM) and with 50 Na(+). This dependency is not significantly affected by changes in external pH in the range from pH 9 to pH 6. Only below pH 6, the voltage dependence of pump current becomes less steep, and may be attributed to a pH-dependent inhibition of the forward pump cycle by external Na(+). External stimulation of the pump by K(+) in the absence of Na(+) can be described by a voltage-dependent K(m) value with an apparent valency z(K). At higher external pH the z(K) value is reduced. The transient current signal in the absence of external K(+) can be described by the sum of three exponentials with voltage-dependent time constants of about 50 ms, 700 micros and less than 100 micros during pulses to 0 mV. The charge distribution was calculated by integration of the transient current signals. The slowest component and the associated charge distributions do not significantly depend on external pH changes. The intermediate component of the transients is represented by a voltage-dependent rate constant which shows a minimum at about -120 mV and increases with decreasing pH. Nevertheless, the contribution to the charge movement is not altered by pH changes due to a simultaneous increase of the amplitude of this component. We conclude that reduction of external pH counteracts external K(+) and Na(+) binding.