Thallous ion movements through gramicidin channels incorporated in lipid monolayers supported by mercury

Electrochemical studies of the mitochondrial ROMK2 potassium channel activity reconstituted into the free-standing and tethered bilayer lipid membranes

The renal-outer-medullary‑potassium (ROMK2) channel modulates potassium transport in the kidney. It has been postulated that the ROMK2 is the pore-forming subunit of the mitochondrial ATP-sensitive potassium channel as a mediator of cardioprotection. In this study, cell-free synthesis of the ROMK2 was performed in presence of membrane scaffold protein (MSP1D1) nanodiscs. Activity measurements were achieved after channel reconstitution into the planar lipid bilayer and tethered bilayer lipid membranes. Both methods allowed for monitoring of channel function, verified with channel blocking and activation/re-activation experiments. The primary function of the mitochondrial potassium channels is to regulate the potential of the mitochondrial membrane, which allows them to play an important role in cytoprotection. This work focuses on obtaining the ROMK2 using a cell-free expression system, followed by the incorporation of the channel protein into the lipid bilayer and studying the influence of voltage changes and molecular modulators on channel activity. Channel activity was measured after its reconstitution into two models of lipid bilayers - BLM (Bilayer Lipid Membrane) and tBLM (Tethered Bilayer Lipid Membrane) deposited on a solid gold electrode. These two model membranes and electrochemical measurements made it possible to measure the flux of K⁺ ions in the presence of channel modulators.

Methods of Measuring Mitochondrial Potassium Channels: A Critical Assessment

In this paper, the techniques used to study the function of mitochondrial potassium channels are critically reviewed. The majority of these techniques have been known for many years as a result of research on plasma membrane ion channels. Hence, in this review, we focus on the critical evaluation of techniques used in the studies of mitochondrial potassium channels, describing their advantages and limitations. Functional analysis of mitochondrial potassium channels in comparison to that of plasmalemmal channels presents additional experimental challenges. The reliability of functional studies of mitochondrial potassium channels is often affected by the need to isolate mitochondria and by functional properties of mitochondria such as respiration, metabolic activity, swelling capacity, or high electrical potential. Three types of techniques are critically evaluated: electrophysiological techniques, potassium flux measurements, and biochemical techniques related to potassium flux measurements. Finally, new possible approaches to the study of the function of mitochondrial potassium channels are presented. We hope that this review will assist researchers in selecting reliable methods for studying, e.g., the effects of drugs on mitochondrial potassium channel function. Additionally, this review should aid in the critical evaluation of the results reported in various articles on mitochondrial potassium channels.

Interaction Study of Phospholipid Membranes with an N-Glucosylated β-Turn Peptide Structure Detecting Autoantibodies Biomarkers of Multiple Sclerosis

The interaction of lipid environments with the type I’ β-turn peptide structure called CSF114 and its N-glucosylated form CSF114(Glc), previously developed as a synthetic antigenic probe recognizing specific autoantibodies in a subpopulation of multiple sclerosis patients’ serum, was investigated by fluorescence spectroscopy and electrochemical experiments using large unilamellar vesicles, mercury supported lipid self-assembled monolayers (SAMs) and tethered bilayer lipid membranes (tBLMs). The synthetic antigenic probe N-glucosylated peptide CSF114(Glc) and its unglucosylated form interact with the polar heads of lipid SAMs of dioleoylphosphatidylcholine at nonzero transmembrane potentials, probably establishing a dual electrostatic interaction of the trimethylammonium  and phosphate groups of the phosphatidylcholine polar head with the Glu⁵ and His⁹ residues on the opposite ends of the CSF114(Glc) β-turn encompassing residues 6-9. His⁹ protonation at pH 7 eliminates this dual interaction. CSF114(Glc) is adsorbed on top of SAMs of mixtures of dioleoylphosphatidylcholine with sphingomyelin, an important component of myelin, whose proteins are hypothesized to undergo an aberrant N-glucosylation triggering the autoimmune response. Incorporation of the type I’ β-turn peptide structure CSF114 into lipid SAMs by potential scans of electrochemical impedance spectroscopy induces defects causing a slight permeabilization toward cadmium ions. The N-glucopeptide CSF114(Glc) does not affect  tBLMs to a detectable extent.

Dermcidin, an anionic antimicrobial peptide: influence of lipid charge, pH and Zn2+ on its interaction with a biomimetic membrane

The mechanism of membrane permeabilization by dermcidin (DCD-1L), an antimicrobial peptide present in human sweat, was investigated at a mercury-supported monolayer of dioleoylphosphatidylcholine (DOPC) or dioleoylphosphatidylserine (DOPS) and at a mercury-supported tethered bilayer lipid membrane (tBLM) consisting of a thiolipid (DPTL) with a DOPC or DOPS monolayer self-assembled on top of it. In an unbuffered solution of pH 5.4, DCD-1L is almost neutral and permeabilizes a DPTL/DOPS tBLM at transmembrane potentials, ϕtrans, which are physiological. In a pH 7 buffer solution DCD-1L bears two negative charges and has no effect on a DPTL/DOPC tBLM, whereas it permeabilizes a DPTL/DOPS tBLM only outside the physiological ϕtrans range; however, the presence of zinc ion induces DCD-1L to permeabilize the DPTL/DOPS tBLM at physiological ϕtrans values. The effect of zinc ions suggests a DCD-1L conformation with its positive N-terminus embedded in the lipid bilayer and the negative C terminus floating on the membrane surface. This conformation can be stabilized by a zinc ion bridge between the His(38) residue of the C terminus and the carboxyl group of DOPS. Chronocoulometric potential jumps from ϕtrans ≅ +160 mV to sufficiently negative values yield charge transients exhibiting a sigmoidal shape preceded by a relatively long "foot". This behavior is indicative of ion-channel formation characterized by disruption of DCD-1L clusters adsorbed on top of the lipid bilayer, incorporation of the resulting monomers and their aggregation into hydrophilic pores by a mechanism of nucleation and growth.

Mercury-supported biomimetic membranes for the investigation of antimicrobial peptides

Tethered bilayer lipid membranes (tBLMs) consist of a lipid bilayer interposed between an aqueous solution and a hydrophilic "spacer" anchored to a gold or mercury electrode. There is great potential for application of these biomimetic membranes for the elucidation of structure-function relationships of membrane peptides and proteins. A drawback in the use of mercury-supported tBLMs with respect to gold-supported ones is represented by the difficulty in applying surface sensitive, spectroscopic and scanning probe microscopic techniques to gather information on the architecture of these biomimetic membranes. Nonetheless, mercury-supported tBLMs are definitely superior to gold-supported biomimetic membranes for the investigation of the function of membrane peptides and proteins, thanks to a fluidity and lipid lateral mobility comparable with those of bilayer lipid membranes interposed between two aqueous phases (BLMs), but with a much higher robustness and resistance to electric fields. The different features of mercury-supported tBLMs reconstituted with functionally active membrane proteins and peptides of bacteriological or pharmacological interest may be disclosed by a judicious choice of the most appropriate electrochemical techniques. We will describe the way in which electrochemical impedance spectroscopy, potential-step chronocoulometry, cyclic voltammetry and phase-sensitive AC voltammetry are conveniently employed to investigate the structure of mercury-supported tBLMs and the mode of interaction of antimicrobial peptides reconstituted into them.

Potential-dependent interaction of DOPC liposomes with an octadecanol-covered Au(111) surface investigated using electrochemical methods coupled with in situ fluorescence microscopy

The potential-controlled incorporation of DOPC liposomes (100 nm diameter) into an adsorbed octadecanol layer on Au(111) was studied using electrochemical and in situ fluorescence microscopy. The adsorbed layer of octadecanol included a small amount of a lipophilic fluorophore-octadecanol modified with BODIPY-to enable fluorescence imaging. The deposited octadecanol layer was found not to allow liposomes to interact unless the potential was less than -0.4 V/SCE, which introduces defects into the adsorbed layer. Small increases in the capacitance of the adsorbed layer were measured after introducing the defects, allowing the liposomes to interact with the defects and then annealing the defects at 0 V/SCE. A change in the adsorbed layer was also signified by a more positive desorption potential for the liposome-modified adsorbed layer as compared to that for an adsorbed layer that was porated in a similar fashion but without liposomes present in the electrolyte. These subtle changes in capacitance are difficult to interpret, so an in situ spectroscopic study was performed to provide a more direct measure of the interaction. The incorporation of liposomes should result in an increase in the fluorescence measured because the fluorophore should become further separated from the gold surface, reducing the efficiency of fluorescence quenching. No significant increase in the fluorescence of the adsorbed layer was observed during the potential pulses used in the poration procedure in the absence of liposomes. In the presence of liposomes, the fluorescence intensity was found to depend on the potential and time used for poration. At 0 V/SCE, no significant change in the fluorescence was observed for defect-free adsorbed layers. Changing the poration potential to -0.4 V/SCE caused significant increases in the fluorescence and the appearance of new structural features in the adsorbed layers that were more easily observed during the desorption procedure. The extent of fluorescence changes was found to be strongly dependent on the nature of the adsorbed layer under investigation, which suggests that the poration and liposome interaction are dependent on the quality of the adsorbed layer and its ease of poration through changes in the electrode potential.

Application of electrochemical impedance spectroscopy to the study of surface processes

The application of Electrochemical Impedance Spectroscopy to the study of surface electrode processes is reviewed. The impedance expressions and the physical meaning of the parameters included in them are shown for three surface processes: adsorption kinetics, diffusion towards partially blocked electrodes and surface confined redox reactions. The models are applied to selected examples, showing the capability of Electrochemical Impedance Spectroscopy to obtain fundamental kinetic information of these processes. A review with 83 references.

Electrochemical modeling of the silica nanoparticle-biomembrane interaction

The interaction of amorphous colloidal silica (SiO(2)) nanoparticles of well-defined sizes with a dioleoyl phosphatidylcholine (DOPC) monolayer on a mercury (Hg) film electrode has been investigated. It was shown using electrochemical methods and microcalorimetry that particles interact with the monolayer, and the electrochemical data shows that the extent of interaction is inversely proportional to the particle size. Scanning electron microscopy (SEM) images of the electrode-supported monolayers following exposure to the particles shows that the nanoparticles bind to the DOPC monolayer irrespective of their size, forming a particle monolayer on the DOPC surface. A one-parameter model was developed to describe the electrochemical results where the fitted parameter is an interfacial layer thickness (3.2 nm). The model is based on the adsorptive interactions operating within this interfacial layer that are independent of the solution pH and solution ionic strength. The evidence implies that the most significant forces determining the interactions are van der Waals in character.

Natural and artificial ion channels for biosensing platforms

The single-molecule selectivity and specificity of the binding process together with the expected intrinsic gain factor obtained when utilizing flow through a channel have attracted the attention of analytical chemists for two decades. Sensitive and selective ion channel biosensors for high-throughput screening are having an increasing impact on modern medical care, drug screening, environmental monitoring, food safety, and biowarefare control. Even virus antigens can be detected by ion channel biosensors. The study of ion channels and other transmembrane proteins is expected to lead to the development of new medications and therapies for a wide range of illnesses. From the first attempts to use membrane proteins as the receptive part of a sensor, ion channels have been engineered as chemical sensors. Several other types of peptidic or nonpeptidic channels have been investigated. Various gating mechanisms have been implemented in their pores. Three technical problems had to be solved to achieve practical biosensors based on ion channels: the fabrication of stable lipid bilayer membranes, the incorporation of a receptor into such a structure, and the marriage of the modified membrane to a transducer. The current status of these three areas of research, together with typical applications of ion-channel biosensors, are discussed in this review.

Effect of the structure of cholesterol-based tethered bilayer lipid membranes on ionophore activity

Tethered bilayer lipid membranes (tBLM) are formed on 1) pure tether lipid triethyleneoxythiol cholesterol (EO(3)C) or on 2) mixed self-assembled monolayers (SAMs) of EO(3)C and 6-mercaptohexanol (6MH). While EO(3)C is required to form a tBLM with high resistivity, 6MH dilutes the cholesterol content in the lower leaflet of the bilayer forming ionic reservoirs required for submembrane hydration. Here we show that these ionic reservoirs are required for ion transport through gramicidin or valinomycin, most likely due to the thermodynamic requirements of ions to be solvated once transported through the membrane. Unexpectedly, electrochemical impedance spectroscopy (EIS) shows an increase of capacitance upon addition of gramicidin, while addition of valinomycin decreases the membrane resistance in the presence of K(+) ions. We hypothesise that this is due to previously reported phase separation of EO(3)C and 6MH on the surface. This results in ionic reservoirs on the nanometre scale, which are not fully accounted for by the equivalent circuits used to describe the system.

A new method to evaluate the surface dipole potential of thiol and disulfide self-assembled monolayers and its application to a disulfidated tetraoxyethylene glycol

A procedure to evaluate the surface dipole potential chi of thiol and disulfide self-assembled monolayers (SAMs) is described. The procedure consists of self-assembling the monolayers on a hanging mercury drop electrode and of measuring the charge involved in a progressive expansion of the mercury drop. This measurement is then combined with an estimate of the charge density q experienced by diffuse layer ions, obtained by measuring the diffuse layer capacitance of the SAM at different electrolyte concentrations by electrochemical impedance spectroscopy. These chi measurements, combined with chronocoulometric measurements of the total charge density sigma(M) against potential, indicate that SAMs of tetraoxyethylene glycol-D,L-alpha-lipoic acid ester (TEGL), 2,3-di-O-phytanyl-sn-glycerol-1-tetraoxyethylene glycol-D,L-alpha-lipoic ester (DPTL), and trioxyethyleneoxythiol (EO3) on mercury may undergo a reversal in the surface dipole potential of their polyoxyethylene chain with a change in the interfacial electric field. Moreover, TEGL and EO3 form stable SAMs without electron transfer to the metal, while no such conclusion can be drawn for DPTL.

An electrochemical study into the interaction between complement-derived peptides and DOPC mono- and bilayers

Electrochemical methods employing the hanging mercury drop electrode were used to study the interaction between variants of the complement-derived antimicrobial peptide CNY21 (CNYITELRRQH ARASHLGLAR) and dioleoyl phosphatidylcholine (DOPC) monolayers. Capacitance potential and impedance measurements showed that the CNY21 analogues investigated interact with DOPC monolayers coating the mercury drop. Increasing the peptide hydrophobicity by substituting the two histidine residues with leucine resulted in a deeper peptide penetration into the hydrophobic region of the DOPC monolayer, indicated by an increase in the dielectric constant of the lipid monolayer (Deltaepsilon = 2.0 after 15 min interaction). Increasing the peptide net charge from +3 to +5 by replacing the histidines by lysines, on the other hand, arrests the peptide in the lipid head group region. Reduction of electroactive ions (Tl+, Pb2+, Cd2+, and Eu3+) at the monolayer-coated electrode was employed to further characterize the types of defects induced by the peptides. All peptides studied permeabilize the monolayer to Tl+ to an appreciable extent, but this effect is more pronounced for the more hydrophobic peptide (CNY21L), which also allows penetration of larger ions and ions of higher valency. The results for the various ions indicate that charge repulsion rather than ion size is the determining factor for cation penetration through peptide-induced defects in the DOPC monolayer. The effects obtained for monolayers were compared to results obtained with bilayers from liposome leakage and circular dichroism studies for unilamellar DOPC vesicles, and in situ ellipsometry for supported DOPC bilayers. Trends in peptide-induced liposome leakage were similar to peptide effects on electrochemical impedance and permeability of electroactive ions for the monolayer system, demonstrating that formation of transmembrane pores alone does not constitute the mechanism of action for the peptides investigated. Instead, our results point to the importance of local packing defects in the lipid membrane in close proximity to the adsorbed peptide molecules.

Interpreting ion fluxes to channel arrays in monolayers

The exponentially decaying permeability model interprets the chronoamperometric currents arising from Tl+ reduction at a Hg electrode covered with a phospholipid monolayer (DOPC) containing gramicidin monomer by combining three processes: (i) the diffusion of an ion to a membrane surface with an array of channels, (ii) the conformational dynamics of the individual channels, and (iii) the passage of the ion through the channels. The introduction of a variable permeability allows us to uncouple the diffusion from the heterogeneous processes, given that the concentration of a species at the active surface can be obtained by semi-integration of the currents. Consideration of a reverse step for the dehydration process at the mouth of the channel allows the analysis of potential steps away from diffusion-limited conditions where a Nernstian-like behavior of the relevant parameter is observed. The model has been successfully applied to data with all trans retinol or benzo-alpha-pyrene as additive to the phospholipid monolayer and to monolayers without any additive at all.

Lipid monolayers on Hg as a valid experimental model for lipid membranes under electrical fields

Monolayers spread on Hg drops are shown as a suitable experimental set up to study the influence of external electric fields on the structure of lipid membranes. The electrical response exhibits a sharp transition at 24 degrees C, the transition temperature of DMPC. In addition, voltammetric response of monolayers of mixtures of DMPC/DMPE adsorbed on mercury, shows a similar trend to that found for dipole potential of monolayers of the same composition spread on an air-solution interface. It is concluded that a lipid monolayer adsorbed in a mercury-solution interface, has comparable properties as those found in other experimental models of lipid membranes in similar conditions. In addition, they constitute an ideal set up to study the effect of electrical fields on the dynamic conformation of lipids as a function of packing change produced by the condensation in the gel state or by the interaction of polar head groups.

Two Photobioelectrochemical Applications of Self-Assembled Films on Mercury

The homogeneous, defect-free surface of a hanging mercury drop electrode was used to self-assemble films apt for the investigation of two photobioelectrochemical systems. Monolayers of straight-chain C12-C18alkane-1-thiols were anchored to a hanging mercury drop electrode and a film of chlorophyll was self-assembled on the top of them. The dependence of the photocurrents generated by illumination of the chlorophyll film with red light, on the thickness of the alkane-1-thiol monolayer and the applied potential is discussed. The photocurrents of purple membrane fragments, adsorbed on a mixed hexadecane-1-thiol/ dioleoylphosphatidylcholine bilayer self-assembled on mercury, were investigated in the presence of sodium perchlorate, chloride and acetate. The effect of the anions on the kinetics of the light-driven proton transport by bacteriorhodopsin has been determined.

Pore formation by 6-ketocholestanol in phospholipid monolayers and its interpretation by a general nucleation-and-growth model accounting for the sigmoidal shape of voltage-clamp curves of ion channels

6-Ketocholestanol (KC), a steroid that differs from cholesterol mainly by the presence of a carbonyl group, forms pores inside a dioleoylphosphatidylcholine monolayer self-assembled on mercury by a mechanism similar to that of channel-forming peptides and proteins. The potential steps responsible for pore formation by KC molecules give rise to potentiostatic charge vs time curves whose sigmoidal shape and potential dependence can be quantitatively interpreted on the basis of a mechanism of nucleation and growth of KC clusters. Pore formation by KC allows the penetration of thallous ions across the otherwise impermeable phosphatidylcholine monolayer, while pore disruption taking place at more negative potentials causes a drop in thallous ion permeation. Pore disruption is also accounted for by a mechanism of nucleation and growth of holes inside the KC clusters. The kinetic model of nucleation and growth is general, and accounts quantitatively for the sigmoidal shape and potential dependence of the classical Hodgkin-Huxley voltage-clamp curves of potassium channels in squid giant axon,(1) using a minimum number of free parameters.