Cell membrane alignment along adhesive surfaces: contribution of active and passive cell processes

Coupled mechanical mapping and interference contrast microscopy reveal viscoelastic and adhesion hallmarks of monocyte differentiation into macrophages

Monocytes activated by pro-inflammatory signals adhere to the vascular endothelium and migrate from the bloodstream to the tissue ultimately differentiating into macrophages. Cell mechanics and adhesion play a crucial role in macrophage functions during this inflammatory process. However, how monocytes change their adhesion and mechanical properties upon differentiation into macrophages is still not well understood. In this work, we used various tools to quantify the morphology, adhesion, and viscoelasticity of monocytes and differentiatted macrophages. Combination of atomic force microscopy (AFM) high resolution viscoelastic mapping with interference contrast microscopy (ICM) at the single-cell level revealed viscoelasticity and adhesion hallmarks during monocyte differentiation into macrophages. Quantitative holographic tomography imaging revealed a dramatic increase in cell volume and surface area during monocyte differentiation and the emergence of round and spread macrophage subpopulations. AFM viscoelastic mapping showed important stiffening (increase of the apparent Young's modulus, E₀) and solidification (decrease of cell fluidity, β) on differentiated cells that correlated with increased adhesion area. These changes were enhanced in macrophages with a spread phenotype. Remarkably, when adhesion was perturbed, differentiated macrophages remained stiffer and more solid-like than monocytes, suggesting a permanent reorganization of the cytoskeleton. We speculate that the stiffer and more solid-like microvilli and lamellipodia might help macrophages to minimize energy dissipation during mechanosensitive activities. Thus, our results revealed viscoelastic and adhesion hallmarks of monocyte differentiation that may be important for biological function.

CD8 Co-Receptor Enhances T-Cell Activation without Any Effect on Initial Attachment

The scanning of surrounding tissues by T lymphocytes to detect cognate antigens requires high speed, sensitivity and specificity. T-cell receptor (TCR) co-receptors such as CD8 increase detection performance, but the exact mechanism remains incompletely understood. Here, we used a laminar flow chamber to measure at the single molecule level the kinetics of bond formation and rupture between TCR- transfected CD8+ and CD8− Jurkat cells and surfaces coated with five peptide-exposing major histocompatibility antigens (pMHCs) of varying activating power. We also used interference reflection microscopy to image the spreading of these cells dropped on pMHC-exposing surfaces. CD8 did not influence the TCR–pMHC interaction during the first few seconds following cell surface encounter, but it promoted the subsequent spreading responses, suggesting that CD8 was involved in early activation rather than binding. Further, the rate and extent of spreading, but not the lag between contact and spreading initiation, depended on the pMHC. Elucidating T-lymphocyte detection strategy may help unravel underlying signaling networks.

Effect of acoustic standing waves on cellular viability and metabolic activity

Acoustic standing wave devices offer excellent potential applications in biological sciences for drug delivery, cell manipulation and tissue engineering. However, concerns have been raised about possible destructive effects on cells due to the applied acoustic field, in addition to other produced secondary factors. Here, we report a systematic study employing a 1D resonant acoustic trapping device to evaluate the cell viability and cell metabolism for a healthy cell line (Human Dermal Fibroblasts, HDF) and a cervical cancer cell line (HeLa), as a function of time and voltages applied (4-10 V_pp) under temperature-controlled conditions. We demonstrate that high cell viability can be achieved reliably when the device is operated at its minimum trapping voltage and tuned carefully to maximise the acoustic standing wave field at the cavity resonance. We found that cell viability and reductive metabolism for both cell lines are kept close to control levels at room temperature and at 34 °C after 15 minutes of acoustic exposure, while shorter acoustic exposures and small changes on temperature and voltages, had detrimental effects on cells. Our study highlights the importance of developing robust acoustic protocols where the operating mode of the acoustic device is well defined, characterized and its temperature carefully controlled, for the application of acoustic standing waves when using live cells and for potential clinical applications.

Lamellipod Reconstruction by Three-Dimensional Reflection Interference Contrast Nanoscopy (3D-RICN)

There are very few techniques to reconstruct the shape of a cell at nanometric resolution, and those that exist are almost exclusively based on fluorescence, implying limitations due to staining constraints and artifacts. Reflection interference contrast microscopy (RICM), a label-free technique, permits the measurement of nanometric distances between refractive objects. However, its quantitative application to cells has been largely limited due to the complex interferometric pattern caused by multiple reflections on internal or thin structures like lamellipodia. Here we introduce 3D reflection interference contrast nanoscopy, 3D-RICN, which combines information from multiple illumination wavelengths and aperture angles to characterize the lamellipodial region of an adherent cell in terms of its distance from the surface and its thickness. We validate this new method by comparing data obtained on fixed cells imaged with atomic force microscopy and quantitative phase imaging. We show that as expected, cells adhering to micropatterns exhibit a radial symmetry for the lamellipodial thickness. We demonstrate that the substrate-lamellipod distance may be as high as 100 nm. We also show how the method applies to living cells, opening the way for label-free dynamical study of cell structures with nanometric resolution.

Guidelines for Microplate Selection in High Content Imaging

Since the inception of commercialized automated high content screening (HCS) imaging devices in the mid to late 1990s, the adoption of media vessels typically used to house and contain biological specimens for interrogation has transitioned from microscope slides and petri dishes into multi-well microtiter plates called microplates. The early 96- and 384-well microplates commonly used in other high-throughput screening (HTS) technology applications were often not designed for optical imaging. Since then, modifications and the use of next-generation materials with improved optical clarity have enhanced the quality of captured images, reduced autofocusing failures, and empowered the use of higher power magnification objectives to resolve fine detailed measurements at the subcellular pixel level. The plethora of microplates and their applications requires practitioners of high content imaging (HCI) to be especially diligent in the selection and adoption of the best plates for running longitudinal studies or larger screening campaigns. While the highest priority in experimental design is the selection of the biological model, the choice of microplate can alter the biological response and ultimately may change the experimental outcome. This chapter will provide readers with background, troubleshooting guidelines, and considerations for choosing an appropriate microplate.

Quantitative Evaluation of Cancer Cell Adhesion to Self-Assembled Monolayer-Patterned Substrates by Reflection Interference Contrast Microscopy

Adhesion of cancer cells with different metastatic potential and anticancer drug resistance has been quantitatively evaluated by using self-assembled monolayer (SAM)-patterned substrates and reflection interference contrast microscopy (RICM). Cell-adhesive SAM spots with optimized diameter could prevent cell-cell adhesion and thus allowed the systematic evaluation of statistically reliable numbers of contact area between single cancer cells and substrates by RICM. The statistical image analysis revealed that highly metastatic mouse melanoma cells showed larger contact area than lowly metastatic cells. We also found that both cancer cell types exhibited distinct transition from the "strong" to "weak" adhesion states with increase in the concentration of (-)-epigallocatechin gallate (EGCG), which is known to exhibit cancer preventive activity. Mathematical analysis of the adhesion transition revealed that adhesion of the highly metastatic mouse melanoma cells showed more EGCG tolerance than that of lowly metastatic cells. Moreover, time-lapse RICM observation revealed that EGCG weakened cancer cell adhesion in a stepwise manner, probably via focal adhesion complex. These results clearly indicate that contact area can be used as a quantitative measure for the determination of cancer phenotypes and their drug resistance, which will provide physical insights into the mechanism of cancer metastasis and cancer prevention.

Leishmania infection modulates beta-1 integrin activation and alters the kinetics of monocyte spreading over fibronectin

Contact with Leishmania leads to a decreases in mononuclear phagocyte adherence to connective tissue. In this work, we studied the early stages of bond formation between VLA4 and fibronectin, measured the kinetics of membrane alignment and the monocyte cytoplasm spreading area over a fibronectin-coated surface, and studied the expression of high affinity integrin epitope in uninfected and Leishmania-infected human monocytes. Our results show that the initial VLA4-mediated interaction of Leishmania-infected monocyte with a fibronectin-coated surface is preserved, however, the later stage, leukocyte spreading over the substrate is abrogated in Leishmania-infected cells. The median of spreading area was 72 [55–89] μm² for uninfected and 41 [34–51] μm² for Leishmania-infected monocyte. This cytoplasm spread was inhibited using an anti-VLA4 blocking antibody. After the initial contact with the fibronectrin-coated surface, uninfected monocyte quickly spread the cytoplasm at a 15 μm² s⁻¹ ratio whilst Leishmania-infected monocytes only made small contacts at a 5.5 μm² s⁻¹ ratio. The expression of high affinity epitope by VLA4 (from 39 ± 21% to 14 ± 3%); and LFA1 (from 37 ± 32% to 18 ± 16%) molecules was reduced in Leishmania-infected monocytes. These changes in phagocyte function may be important for parasite dissemination and distribution of lesions in leishmaniasis.

T lymphocytes need less than 3 min to discriminate between peptide MHCs with similar TCR-binding parameters

T lymphocytes need to detect rare cognate foreign peptides among numerous foreign and self-peptides. This discrimination seems to be based on the kinetics of TCRs binding to their peptide-MHC (pMHC) ligands, but there is little direct information on the minimum time required for processing elementary signaling events and deciding to initiate activation. Here, we used interference reflection microscopy to study the early interaction between transfected human Jurkat T cells expressing the 1G4 TCR and surfaces coated with five different pMHC ligands of 1G4. The pMHC concentration required for inducing 50% maximal IFN-γ production by T cells, and 1G4-pMHC dissociation rates measured in soluble phase or on surface-bound molecules, displayed six- to sevenfold variation among pMHCs. When T cells were dropped onto pMHC-coated surfaces, rapid spreading occurred after a 2-min lag. The initial spreading rate measured during the first 45 s, and the contact area, were strongly dependent on the encountered TCR ligand. However, the lag duration did not significantly depend on encountered ligand. In addition, spreading appeared to be an all-or-none process, and the fraction of spreading cells was tightly correlated to the spreading rate and spreading area. Thus, T cells can discriminate between fairly similar TCR ligands within 2 min.

Use of TIRF to Monitor T-Lymphocyte Membrane Dynamics with Submicrometer and Subsecond Resolution

A key step of adaptive immune responses is the T lymphocyte capacity to detect the presence of foreign antigens on specialized cells with high speed and specificity during contacts lasting a few minutes. Much evidence suggests that there is a deep link between the lifetime of molecular interactions between T cell receptors and ligands and T cell activation, but the precise mechanisms of bond formation and dissociation remain incompletely understood. Previous experiments done with interference reflection microscopy/reflection interference contrast microscopy disclosed transverse motions with several nanometer average amplitude of micrometer size membrane zones. More recently, total internal reflection fluorescence microscopy was used to show that the initial interaction between primary T lymphocytes and model surfaces involved the tip of microvilli (typically 0.2 µm² area) generating apparent contacts of a few seconds that allowed cells to detect ligands of their membrane receptors. Here we show that these microvilli displayed minimal lateral displacements but quantitative fluorescence measurement suggested the occurrence of spontaneous transverse fluctuations of order of 67 nm amplitude during 1-s observation periods. This may play a major role in membrane receptor engagement and ensuing signal generation.

Effects of microfluidic channel geometry on leukocyte rolling assays

Microfluidic cell adhesion assays have emerged as a means to increase throughput as well as reduce the amount of costly reagents. However as dimensions of the flow chamber are reduced and approach the diameter of a cell (D(c)), theoretical models have predicted that mechanical stress, force, and torque on a cell will be amplified. We fabricated a series of microfluidic devices that have a constant width:height ratio (10:1) but with varying heights. The smallest microfluidic device (200 μm ×20 μm) requires perfusion rates as low as 40 nL/min to generate wall shear stresses of 0.5 dynes/cm(2). When neutrophils were perfused through P-selectin coated chambers at equivalent wall shear stress, rolling velocities decreased by approximately 70 % as the ratio of cell diameter to chamber height (D(c)/H) increased from 0.08 (H = 100 μm) to 0.40 (H = 20 μm). Three-dimensional numerical simulations of neutrophil rolling in channels of different heights showed a similar trend. Complementary studies with PSGL-1 coated microspheres and paraformaldehyde-fixed neutrophils suggested that changes in rolling velocity were related to cell deformability. Using interference reflection microscopy, we observed increases in neutrophil contact area with increasing chamber height (9-33 %) and increasing wall shear stress (28-56 %). Our results suggest that rolling velocity is dependent not only on wall shear stress but also on the shear stress gradient experienced by the rolling cell. These results point to the D(c)/H ratio as an important design parameter of leukocyte microfluidic assays, and should be applicable to rolling assays that involve other cell types such as platelets or cancer cells.

Amyloid precursor protein is an autonomous growth cone adhesion molecule engaged in contact guidance

Amyloid precursor protein (APP), a transmembrane glycoprotein, is well known for its involvement in the pathogenesis of Alzheimer disease of the aging brain, but its normal function is unclear. APP is a prominent component of the adult as well as the developing brain. It is enriched in axonal growth cones (GCs) and has been implicated in cell adhesion and motility. We tested the hypothesis that APP is an extracellular matrix adhesion molecule in experiments that isolated the function of APP from that of well-established adhesion molecules. To this end we plated wild-type, APP-, or β1-integrin (Itgb1)- misexpressing mouse hippocampal neurons on matrices of either laminin, recombinant L1, or synthetic peptides binding specifically to Itgb1 s or APP. We measured GC adhesion, initial axonal outgrowth, and substrate preference on alternating matrix stripes and made the following observations: Substrates of APP-binding peptide alone sustain neurite outgrowth; APP dosage controls GC adhesion to laminin and APP-binding peptide as well as axonal outgrowth in Itgb1- independent manner; and APP directs GCs in contact guidance assays. It follows that APP is an independently operating cell adhesion molecule that affects the GC's phenotype on APP-binding matrices including laminin, and that it is likely to affect axon pathfinding in vivo.

High-throughput quantitative imaging of cell spreading dynamics by multi-step microscopy projection photolithography based on a cell-friendly photoresist

A new method for the high-throughput study of cell spreading dynamics is devised by multi-step microscopy projection photolithography based on a cell-friendly photoresist. By releasing a large number of rounded cells in single cell arrays and monitoring their spreading dynamics by interference reflection microscopy, a large number of cell spreading data can be acquired by a single experiment.

Cells cultured on microgrooves with or without surface coating: correlation between cell alignment, spreading and local membrane deformation

The behaviors of cells cultured on patterned substrates vary with the material stiffness, the geometry and the biochemical properties of the pattern. By using a reversed cell imprinting (RCI) technique, together with phase contrast microscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM), we have exploited reversed side cellular morphology on patterned microgrooves of different geometries with or without surface coating of adhesion molecules. We have shown a close correlation between the effect of contact guidance and penetration of cellular membrane. Without surface coating, roughly 80% of HeLa cells were aligned along the groove direction regardless of the groove spacing. When the microgrooves were coated with fibronectin, the area of cell spreading was increased but the percentage of aligned cells was significantly decreased. In both cases, the deformation of cell membrane at the cell-pattern interfaces could be measured. We found that the local penetration of the cellular membrane into the grooves was correlated to the cellular alignment for both HeLa and NIH 3T3 cells, and that such a correlation was cell-type dependent.

The role of fibrinogen spacing and patch size on platelet adhesion under flow

Platelet adhesion to the vessel wall during vascular injury is mediated by platelet glycoproteins binding to their respective ligands on the vascular wall. In this study we investigated the roles that ligand patch spacing and size play in regulating platelet interactions with fibrinogen under hemodynamic flow conditions. To regulate the size and distance between patches of fibrinogen we developed a photolithography-based technique to fabricate patterns of proteins surrounded by a protein-repellant layer of poly(ethylene glycol). We demonstrate that when mepacrine labeled whole blood is perfused at a shear rate of 100 s ⁻¹ over substrates patterned with micron-sized wide lines of fibrinogen, platelets selectively adhere to the areas of patterned fibrinogen. Using fluorescent and scanning electron microscopy we demonstrate that the degree of platelet coverage (3-35%) and the ability of platelet aggregates to grow laterally are dependent upon the distance (6-30 μm) between parallel lines of fibrinogen. We also report on the effects of fibrinogen patch size on platelet adhesion by varying the size of the protein patch (2-20 μm) available for adhesion, demonstrating that the downstream length of the ligand patch is a critical parameter in platelet adhesion under flow. We expect that these results and protein patterning surfaces will be useful in understanding the spatial and temporal dynamics of platelet adhesion under physiologic flow, and in the development of novel platelet adhesion assays.

Contemporaneous cell spreading and phagocytosis: magneto-resistive real-time monitoring of membrane competing processes

Adhesion and spreading of cells strongly depend on the properties of the underlying surface, which has significant consequences in long-term cell behavior adaption. This relationship is important for the understanding of both biological functions and their bioactivity in disease-related applications. Employing our magnetic lab-on-a-chip system, we present magnetoresistive-based real-time and label-free detection of cellular phagocytosis behavior during their spreading process on particle-immobilized sensor surfaces. Cell spreading experiments carried out on particle-free and particle-modified surfaces reveal a delay in spreading rate after an elapsed time of about 2.2h for particle-modified surfaces due to contemporaneous cell membrane loss by particle phagocytosis. Our associated magnetoresistive measurements show a high uptake rate at early stages of cell spreading, which decreases steadily until it reaches saturation after an average elapsed time of about 100 min. The corresponding cellular average uptake rate during the entire cell spreading process accounts for three particles per minute. This result represents a four times higher phagocytosis efficiency compared to uptake experiments carried out for confluently grown cells, in which case cell spreading is already finished and, thus, excluded. Furthermore, other dynamic cell-surface interactions at nano-scale level such as cell migration or the dynamics of cell attachment and detachment are also addressable by our magnetic lab-on-a-chip approach.

Membrane dynamics correlate with formation of signaling clusters during cell spreading

The morphology and duration of contacts between cells and adhesive surfaces play a key role in several biological processes, such as cell migration, cell differentiation, and the immune response. The interaction of receptors on the cell membrane with ligands on the adhesive surface leads to triggering of signaling pathways, which allow cytoskeletal rearrangement, and large-scale deformation of the cell membrane, which allows the cell to spread over the substrate. Despite numerous studies of cell spreading, the nanometer-scale dynamics of the membrane during formation of contacts, spreading, and initiation of signaling are not well understood. Using interference reflection microscopy, we study the kinetics of cell spreading at the micron scale, as well as the topography and fluctuations of the membrane at the nanometer scale during spreading of Jurkat T cells on antibody-coated substrates. We observed two modes of spreading, which were characterized by dramatic differences in membrane dynamics and topography. Formation of signaling clusters was closely related to the movement and morphology of the membrane in contact with the activating surface. Our results suggest that cell membrane morphology may be a critical constraint on signaling at the cell-substrate interface.

Differential dynamics of platelet contact and spreading

Platelet spreading is critical for hemostatic plug formation and thrombosis. However, the detailed dynamics of platelet spreading as a function of receptor-ligand adhesive interactions has not been thoroughly investigated. Using reflection interference contrast microscopy, we found that both adhesive interactions and PAR4 activation affect the dynamics of platelet membrane contact formation during spreading. The initial growth of close contact area during spreading was controlled by the combination of different immobilized ligands or PAR4 activation on fibrinogen, whereas the growth of the total area of spreading was independent of adhesion type and PAR4 signaling. We found that filopodia extend to their maximal length and then contract over time; and that filopodial protrusion and expansion were affected by PAR4 signaling. Upon PAR4 activation, the integrin α(IIb)β(3) mediated close contact to fibrinogen substrata and led to the formation of ringlike patterns in the platelet contact zone. A systematic study of platelet spreading of GPVI-, α(2)-, or β(3)-deficient platelets on collagen or fibrinogen suggests the integrin α(2) is indispensable for spreading on collagen. The platelet collagen receptors GPVI and α(2) regulate integrin α(IIb)β(3)-mediated platelet spreading on fibrinogen. This work elucidates quantitatively how receptor-ligand adhesion and biochemical signals synergistically control platelet spreading.

Initial dynamics of cell spreading are governed by dissipation in the actin cortex

The initial stages of spreading of a suspended cell onto a substrate under the effect of (specific or nonspecific) adhesion exhibit a universal behavior, which is cell-type independent. We show that this behavior is governed only by cell-scale phenomena. This can be understood if the main retarding force that opposes cell adhesion is of mechanical origin, that is, dissipation occurring during the spreading. By comparing several naive models that generate different patterns of dissipation, we show by numerical simulation that only dissipation due to the deformation of the actin cortex is compatible with the experimental observations. This viscous-like dissipation corresponds to the energetic cost of rearranging the cytoskeleton, and is the trace of all dissipative events occurring in the cell cortex during the early spreading, such as the binding and unbinding of cross-linkers and molecular friction.

A novel leukocyte adhesion deficiency III variant: kindlin-3 deficiency results in integrin- and nonintegrin-related defects in different steps of leukocyte adhesion

Leukocyte adhesion deficiency type III is a recently described condition involving a Glanzmann-type bleeding syndrome and leukocyte adhesion deficiency. This was ascribed to a defect of the FERMT3 gene resulting in abnormal expression of kindlin-3, a protein expressed in hematopoietic cells with a major role in the regulation of integrin activation. In this article, we describe a patient with a new mutation of FERMT3 and lack of kindlin-3 expression in platelets and leukocytes. We assayed quantitatively the first steps of kindlin-3-defective leukocyte adhesion, namely, initial bond formation, bond strengthening, and early spreading. Initial bond formation was readily stimulated with neutrophils stimulated by fMLF, and neutrophils and lymphocytes stimulated by a phorbol ester or Mn(2+). In contrast, attachment strengthening was defective in the patient's lymphocytes treated with PMA or Mn(2+), or fMLF-stimulated neutrophils. However, attachment strengthening was normal in patient's neutrophils treated with phorbol ester or Mn(2+). In addition, the patient's T lymphocytes displayed defective integrin-mediated spreading and a moderate but significant decrease of spreading on anti-CD3-coated surfaces. Patient's neutrophils displayed a drastic alteration of integrin-mediated spreading after fMLF or PMA stimulation, whereas signaling-independent Mn(2+) allowed significant spreading. In conclusion, the consequences of kindlin-3 deficiency on β(2) integrin function depend on both cell type and the stimulus used for integrin activation. Our results suggest looking for a possible kindlin-3 involvement in membrane dynamical event independent of integrin-mediated adhesion.

Early contacts between T lymphocytes and activating surfaces

Cells continually probe their environment to adapt their behaviour. A current challenge is to determine how they analyse nearby surfaces and how they process information to take decisions. We addressed this problem by monitoring human T lymphocyte attachment to surfaces coated with activating anti-CD3 or control anti-HLA antibodies. Interference reflection microscopy allowed us to monitor cell-to-surface apposition with a few nanometre vertical resolution during the first minutes following contact. We found that (i) when a cell fell on a surface, contact extension was preceded by a lag of several tens of seconds. (ii) During this lag, vertical membrane undulations seemed to generate transient contacts with underlying surfaces. (iii) After the lag period, the contact area started increasing linearly with a rate of about 1.5 µm(2) s(-1) on activating surfaces and about 0.2 µm(2) s(-1) on control surfaces. (iv) Concomitantly with lateral surface extension, the apparent distance between cell membranes and surfaces steadily decreased. These results are consistent with the hypothesis that the cell decision to spread rapidly on activating surfaces resulted from the integration of information yielded by transient contacts with these surfaces generated by membrane undulations during a period of about 1 min.

Affinity, lateral mobility, and clustering contribute independently to beta 2-integrin-mediated adhesion

Affinity changes and avidity modulation both contribute to activation of beta(2)-integrin-mediated adhesion, an essential, early step in inflammation. Avidity modulation, defined as an increase in adhesiveness independent of integrin conformational changes, might be due to integrin clustering, motion, or both. Increased integrin diffusion upon leukocyte activation has been demonstrated, but whether it is proadhesive in itself, or just constitutes a mechanism for integrin clustering, remains unclear. To understand the proadhesive effects of integrin affinity changes, clustering, and motion, an experimental system was devised to separate them. Clustering and integrin motion together were induced by cytochalasin D (CD) without inducing high-affinity; integrin motion could then be frozen by fixation; and high affinity was induced independently by Mn(2+). Adhesion was equivalent for fixed and unfixed cells except following pretreatment with CD or Mn(2+), which increased adhesion for both. However, fixed cells were less adhesive than unfixed cells after CD, even though integrin clustering was similar. A simple explanation is that CD induces both clustering and integrin motion, fixation then stops motion on fixed cells, but integrins continue to diffuse on unfixed cells, increasing the kinetics of integrin/ICAM-1 interactions to enhance adhesion. Affinity changes are then independent of, and additive to, avidity effects.

Quantitative reflection interference contrast microscopy (RICM) in soft matter and cell adhesion

Adhesion can be quantified by measuring the distance between the interacting surfaces. Reflection interference contrast microscopy (RICM), with its ability to measure inter-surface distances under water with nanometric precision and milliseconds time resolution, is ideally suited to studying the dynamics of adhesion in soft systems. Recent technical developments, which include innovative image analysis and the use of multi-coloured illumination, have led to renewed interest in this technique. Unambiguous quantitative measurements have been achieved for colloidal beads and model membranes, thus revealing new insights and applications. Quantification of data from cells shows exciting prospects. Herein, we review the basic principles and recent developments of RICM applied to studies of dynamical adhesion processes in soft matter and cell biology and provide practical hints to potential users.

TM9SF4 is required for Drosophila cellular immunity via cell adhesion and phagocytosis

Nonaspanins are characterised by a large N-terminal extracellular domain and nine putative transmembrane domains. This evolutionarily conserved family comprises three members in Dictyostelium discoideum (Phg1A, Phg1B and Phg1C) and Drosophila melanogaster, and four in mammals (TM9SF1-TM9SF4), the function of which is essentially unknown. Genetic studies in Dictyostelium demonstrated that Phg1A is required for cell adhesion and phagocytosis. We created Phg1A/TM9SF4-null mutant flies and showed that they were sensitive to pathogenic Gram-negative, but not Gram-positive, bacteria. This increased sensitivity was not due to impaired Toll or Imd signalling, but rather to a defective cellular immune response. TM9SF4-null larval macrophages phagocytosed Gram-negative E. coli inefficiently, although Gram-positive S. aureus were phagocytosed normally. Mutant larvae also had a decreased wasp egg encapsulation rate, a process requiring haemocyte-dependent adhesion to parasitoids. Defective cellular immunity was coupled to morphological and adhesion defects in mutant larval haemocytes, which had an abnormal actin cytoskeleton. TM9SF4, and its closest paralogue TM9SF2, were both required for bacterial internalisation in S2 cells, where they displayed partial redundancy. Our study highlights the contribution of phagocytes to host defence in an organism possessing a complex innate immune response and suggests an evolutionarily conserved function of TM9SF4 in eukaryotic phagocytes.

Physical model for membrane protrusions during spreading

During cell spreading onto a substrate, the kinetics of the contact area is an observable quantity. This paper is concerned with a physical approach to modeling this process in the case of ameboid motility where the membrane detaches itself from the underlying cytoskeleton at the leading edge. The physical model we propose is based on previous reports which highlight that membrane tension regulates cell spreading. Using a phenomenological feedback loop to mimic stress-dependent biochemistry, we show that the actin polymerization rate can be coupled to the stress which builds up at the margin of the contact area between the cell and the substrate. In the limit of small variation of membrane tension, we show that the actin polymerization rate can be written in a closed form. Our analysis defines characteristic lengths which depend on elastic properties of the membrane-cytoskeleton complex, such as the membrane-cytoskeleton interaction, and on molecular parameters, the rate of actin polymerization. We discuss our model in the case of axi-symmetric and non-axi-symmetric spreading and we compute the characteristic time scales as a function of fundamental elastic constants such as the strength of membrane-cytoskeleton adherence.

How cells tiptoe on adhesive surfaces before sticking

Cell membranes are studded with protrusions that were thoroughly analyzed with electron microscopy. However, the nanometer-scale three-dimensional motions generated by cell membranes to fit the topography of foreign surfaces and initiate adhesion remain poorly understood. Here, we describe the dynamics of surface deformations displayed by monocytic cells bumping against fibronectin-coated surfaces. We observed membrane undulations with typically 5 nm amplitude and 5-10 s lifetime. Cell membranes behaved as independent units of micrometer size. Cells detected the presence of foreign surfaces at 50 nm separation, resulting in time-dependent amplification of membrane undulations. Molecular contact then ensued with apparent cell-membrane separation of 30-40 nm, and this distance steadily decreased during the following tens of seconds. Contact maturation was associated with in-plane egress of bulky molecules and robust membrane fluctuations. Thus, membrane undulations may be the major determinant of cell sensitivity to substrate topography, outcome of interaction, and initial kinetics of contact extension.

Capillary-induced contact guidance

Topographical features are known to impose capillary forces on liquid droplets, and this phenomenon is exploited in applications such as printing, coatings, textiles and microfluidics. Surface topographies also influence the behavior of biological cells (i.e., contact guidance), with implications ranging from medicine to agriculture. An accurate physical description of how cells detect and respond to surface topographies is necessary in order to move beyond a purely heuristic approach to optimizing the topographies of biomaterial interfaces. Here, we have used a combination of Langmuir-Blodgett lithography and nanoimprinting to generate a range of synthetic microstructured surfaces with grooves of subcellular dimensions in order to investigate the influence of capillary forces on the biological process of contact guidance. The physical-chemical properties of these surfaces were assessed by measuring the anisotropic spreading of sessile water droplets. Having established the physical properties of each surface, we then investigated the influence of capillary forces on the processes of cellular contact guidance in biological organisms, using mammalian osteoblasts and germinating fungal spores as tester organisms. Our results demonstrate that capillary effects are present in topographical contact guidance and should therefore be considered in any physical model that seeks to predict how cells will respond to a particular surface topography.

Cell spreading: the power to simplify

A eukaryotic cell spreads over a substrate in distinct stages, with the earliest events characterized by passive adhesion and cell deformation. Recent work suggests a common physical mechanism can explain the early stages of cell spreading for a wide range of cell types and substrates.

The universal dynamics of cell spreading

Cell adhesion and motility depend strongly on the interactions between cells and extracellular matrix (ECM) substrates. When plated onto artificial adhesive surfaces, cells first flatten and deform extensively as they spread. At the molecular level, the interaction of membrane-based integrins with the ECM has been shown to initiate a complex cascade of signaling events [1], which subsequently triggers cellular morphological changes and results in the generation of contractile forces [2]. Here, we focus on the early stages of cell spreading and probe their dynamics by quantitative visualization and biochemical manipulation with a variety of cell types and adhesive surfaces, adhesion receptors, and cytoskeleton-altering drugs. We find that the dynamics of adhesion follows a universal power-law behavior. This is in sharp contrast with the common belief that spreading is regulated by either the diffusion of adhesion receptors toward the growing adhesive patch [3-5] or by actin polymerization [6-8]. To explain this, we propose a simple quantitative and predictive theory that models cells as viscous adhesive cortical shells enclosing a less viscous interior. Thus, although cell spreading is driven by well-identified biomolecular interactions, it is dynamically limited by its mesoscopic structure and material properties.

Fluorescence analysis with quantum dot probes for hepatoma under one- and two-photon excitation

A new class of fluorescent probe produced by conjugating semiconductor quantum dots (QDs) with protein molecule is proposed as an alternative to conventional organic labels. However the fluorescence characteristics of the QD bioconjugates are not clear while they are excitied with one- or two-photon laser pulse. We synthesized specific immunofluorescent probes by linking QDs to alpha fetoprotein (AFP) antibody for specific binding alpha-fetoprotein -an important marker for hepatocellular carcinoma cell lines, and archived specific fluorescence detection with the QDs-Anti-AFP in nude mice. Then, we have analyzed the fluorescence characteristics of QDs-Anti-AFP and original QDs both under one- and two-photon excitations. The results demonstrated that QDs-Anti-AFP's fluorescent spectral and lifetime haven't varied much from that of original QDs. Moreover, QDs-Anti-AFP have exhibited higher fluorescence efficiency than QDs under two-photon examination.

BMP4 induces EMT and Rho GTPase activation in human ovarian cancer cells

We identified previously an autocrine bone morphogenetic protein-4 (BMP4) signalling pathway in primary human normal ovarian surface epithelial (OSE) and epithelial ovarian cancer (OvCa) cells. Herein we show that treatment of OvCa cells with BMP4 produced morphological alterations and increased cellular adhesion, motility and invasion. The BMP4 inhibitor noggin blocked the BMP4-induced phenotype, and decreased autocrine BMP4-mediated OvCa cell motility and adherence. In response to exogenous BMP4, the epithelial-mesenchymal transition (EMT) markers Snail and Slug mRNA and protein were up-regulated, E-cadherin mRNA and protein were down-regulated and the network of alpha smooth muscle actin changed to resemble a mesenchymal cell. We also observed changes in the level of activated Rho GTPases in OvCa cells treated with BMP4, strongly suggesting that the changes in morphology, adhesion, motility and invasion are probably mediated through the activation of these molecules. Strikingly, treatment of normal OSE cells with BMP4 or noggin failed to alter cell motility, providing evidence that OSE and OvCa cells possess a distinct capability to respond to BMP4. Overall, our studies suggest a link between autocrine BMP signalling mediated through the Rho GTPase family and Snail- and Slug-induced EMT that may collectively contribute to aggressive OvCa behaviour.

Immunofluorescence detection with quantum dot bioconjugates for hepatoma in vivo

The use of highly specific and highly sensitive immunofluorescent probes is a promising approach for biomedical imaging in living tissue. We focus on immunofluorescence with quantum dot bioconjugates for hepatoma detection in vivo. We synthesized specific immunofluorescent probes by linking quantum dots to AFP (alpha-fetoprotein) antibody for specific binding AFP-an important marker for hepatocellular carcinoma cell lines. In in vivo studies, the characteristic quantum dot (QD) fluorescent property is exhibited by the QDs-Anti-AFP probes in tumor and they demonstrate active tumor targeting and spectroscopic hepatoma imaging with an integrated fluorescence imaging system. We investigate the inhomogeneous distribution of the QDs-Anti-AFP probes in tumor by using a site-by-site measurement method to test their ability for distribution studies of cancer cells. These results demonstrate the practicality of QD bioconjugates as attractive fluorescent probes for biomedical detection.

Spreading of neutrophils: from activation to migration

Neutrophils rely on rapid changes in morphology to ward off invaders. Time-resolved dynamics of spreading human neutrophils after activation by the chemoattractant fMLF (formyl methionyl leucyl phenylalanine) was observed by RICM (reflection interference contrast microscopy). An image-processing algorithm was developed to identify the changes in the overall cell shape and the zones of close contact with the substrate. We show that in the case of neutrophils, cell spreading immediately after exposure of fMLF is anisotropic and directional. The dependence of spreading area, A, of the cell as a function of time, t, shows several distinct regimes, each of which can be fitted as power laws (A ~ t(b)). The different spreading regimes correspond to distinct values of the exponent b and are related to the adhesion state of the cell. Treatment with cytochalasin-B eliminated the anisotropy in the spreading.

Resonant waveguide grating biosensor for living cell sensing

This article presents theoretical analysis and experimental data for the use of resonant waveguide grating (RWG) biosensors to characterize stimulation-mediated cell responses including signaling. The biosensor is capable of detecting redistribution of cellular contents in both directions that are perpendicular and parallel to the sensor surface. This capability relies on online monitoring cell responses with multiple optical output parameters, including the changes in incident angle and the shape of the resonant peaks. Although the changes in peak shape are mainly contributed to stimulation-modulated inhomogeneous redistribution of cellular contents parallel to the sensor surface, the shift in incident angle primarily reflects the stimulation-triggered dynamic mass redistribution (DMR) perpendicular to the sensor surface. The optical signatures are obtained and used to characterize several cellular processes including cell adhesion and spreading, detachment and signaling by trypsinization, and signaling through either epidermal growth factor receptor or bradykinin B2 receptor. A mathematical model is developed to link the bradykinin-mediated DMR signals to the dynamic relocation of intracellular proteins and the receptor internalization during B2 receptor signaling cycle. This model takes the form of a set of nonlinear, ordinary differential equations that describe the changes in four different states of B2 receptors, diffusion of proteins and receptor-protein complexes, and the DMR responses. Classical analysis shows that the system converges to a unique optical signature, whose dynamics (amplitudes, transition time, and kinetics) is dependent on the bradykinin signal input, and consistent with those observed using the RWG biosensors. This study provides fundamentals for probing living cells with the RWG biosensors, in general, optical biosensors.

A new technical approach to quantify cell–cell adhesion forces by AFM

Cell-cell adhesion is a complex process that is involved in the tethering of cells, cell-cell communication, tissue formation, cell migration and the development and metastasis of tumors. Given the heterogeneous and complex nature of cell surfaces it has previously proved difficult to characterize individual cell-cell adhesion events. Force spectroscopy, using an atomic force microscope, is capable of resolving such individual cell-cell binding events, but has previously been limited in its application due to insufficient effective pulling distances. Extended pulling range is critical in studying cell-cell interactions due to the potential for large cell deformations. Here we describe an approach to such experiments, where the sample stage can be moved 100 microm in the z-direction, by closed loop, linearized piezo elements. Such an approach enables an increase in pulling distance sufficient for the observation of long-distance cell-unbinding events without reducing the imaging capabilities of the atomic force microscope. The atomic force microscope head and the piezo-driven sample stage are installed on an inverted optical microscope fitted with a piezo-driven objective, to allow the monitoring of cell morphology by conventional light microscopy, concomitant with force spectroscopy measurements. We have used the example of the WM115 melanoma cell line binding to human umbilical vein endothelial cells to demonstrate the capabilities of this system and the necessity for such an extended pulling range when quantifying cell-cell adhesion events.

Molecular bond formation between surfaces: anchoring and shearing effects

Specific molecular bonds between apposing surfaces play a central role in many biological structures and functions. They display a widely varying anchoring to the cell surface, and they are subject to forces that affect their binding characteristics due to their hydrodynamic environments. Here, we examine both anchoring and shearing aspects using simplified model systems aimed at gaining insight into the formation of a 2D bond collection under stress using two different surface anchors. The highly specific streptavidin-biotin molecular bond was chosen as the model receptor-ligand pair, and grafted colloids were used as model surfaces. To explore the role of the surface anchor, we grafted biotin onto the particle surface following two different approaches: first, the grafting was performed directly on the particle amine functions; second, a 35-nm-long PEG spacer was used. Hybrid particle classes were brought into contact in a homogeneous shear (between 200 s(-)(1) and 1200 s(-)(1)) using a cone plate geometry. The bond association and dissociation kinetics were given by the time course assemblage of hybrid particles into doublets. We observed saturating kinetics profiles that we interpreted as a linkage-breakage equilibrium, which yielded the on and off rates. We found that the biotin-PEG spacer was needed in order to observe significant binding at any shear rate. We also showed that only the number of collisions per unit time, generated by the shear, affected the on rate of the binding. Neither the exerted forces nor the collision lifetime had any effect. The off rate decreased with shear, possibly because of the shortening of the force duration, which results from the increasing shear rate.

Mechanics of crawling cells

Crawling of keratocytes derived from aquatic vertebrates represents a very useful model system for the investigation of cell locomotion because of its ease of handling and the clear structural separation of a thin cytoplasmic layer, the lamella, from the cell body containing the nucleus and other organelles. Spreading of spherical keratocytes results in fried egg shaped cells, which on withdrawing their lamella at one side become polarized and start moving. Hydrostatic pressure, tension at the cortex, traction forces exerted on the adhesion sites and inside the cells along filamentous structures are required to gain a certain shape. Traction forces have been made visible using scanning acoustic microscopy. This method also allowed for the demonstration of cytoplasmic fluxes inside a moving keratocyte and changes of forces while a migrating cell is changing its direction of locomotion. The pros and cons for actin polymerization at the leading front providing the driving force for crawling are discussed on the basis of structural and experimental results: do they stringently identify polymerization of actin as the only driving machinery. Such a mechanism not only should explain the advancement of the leading edge but also the movement of the whole cell, i.e. the material flux taking place from the cell body to the periphery. Even if the lamella periphery itself may be motile by actin turnover this scheme may represent an oversimplification if applied to the whole cell. Considering the complexity of a whole cell simplifying model systems may not lead to adequate descriptions of the mechanisms as they occur within cells with a highly complex structure, although the model might be consistent and sufficient to describe, i.e. crawling in general.

Kinetics of cell spreading

Cell spreading is a fundamental event where the contact area with a solid substrate increases because of actin polymerization. We propose in this Letter a physical model to study the growth of the contact area with time. This analysis is compared with experimental data using the ameoba Dictyostelium discoideum. Our model couples the stress, which builds up at the margin of the contact area when the cell spreads, to the biochemical processes of actin polymerization. This leads to a scaling analysis of experimental data with a characteristic time whose order of magnitude compares well with our experimental results.

Adhesion contact dynamics of primary hepatocytes on poly(ethylene terephthalate) surface

The design of bioartificial liver assist device requires an effective attachment of primary hepatocytes on polymeric biomaterials. A better understanding of this cell-surface interaction would aid the optimal choice of biomaterials. In this study, the adhesion contact dynamics of primary hepatocytes on poly(ethylene terephthalate) (PET) surface with grafted poly(acrylic acid) (PAA) and coated collagen is probed with confocal reflectance interference contrast microscopy (C-RICM) in conjunction with phase contrast microscopy. An increase of acrylic acid density from 0 to 12 nmole/cm2 raises both the root-mean-square surface roughness and amount of adsorbed collagen of PET surface. C-RICM demonstrates that hepatocytes form tight adhesion contacts upon seeding on both plain PET and PAA-grafted PET (both with collagen coating) despite the insignificant two-dimensional cell spreading. At two hours after cell seeding, the normalized contact area and adhesion energy of hepatocytes on 12 nmole/cm2 PAA-grafted-PET (with collagen coating) is 27% and 114% higher, respectively, than that on collagen coated plain PET. Interestingly, the growth kinetics of adhesion patch for hepatocyte on PAA-grafted PET with collagen coating is best fitted by R proportional to t0.5 and is significantly different from that on collagen coated plain PET, which is best fitted by R proportional to t0.25. Overall, this study demonstrates the modulation of biophysical response of adherent hepatocytes through the control of the biomaterial surface properties.