Transformation of actin-encapsulating liposomes induced by cytochalasin D

Composite branched and linear F-actin maximize myosin-induced membrane shape changes in a biomimetic cell model

The architecture of the actin cortex determines the generation and transmission of stresses, during key events from cell division to migration. However, its impact on myosin-induced cell shape changes remains unclear. Here, we reconstitute a minimal model of the actomyosin cortex with branched or linear F-actin architecture within giant unilamellar vesicles (GUVs, liposomes). Upon light activation of myosin, neither the branched nor linear F-actin architecture alone induces significant liposome shape changes. The branched F-actin network forms an integrated, membrane-bound "no-slip boundary" -like cortex that attenuates actomyosin contractility. By contrast, the linear F-actin network forms an unintegrated "slip boundary" -like cortex, where actin asters form without inducing membrane deformations. Notably, liposomes undergo significant deformations at an optimized balance of branched and linear F-actin networks. Our findings highlight the pivotal roles of branched F-actin in force transmission and linear F-actin in force generation to yield membrane shape changes.

Unveiling the physics underlying symmetry breaking of the actin cytoskeleton: An artificial cell-based approach

Single-cell behaviors cover many biological functions, such as cell division during morphogenesis and tissue metastasis, and cell migration during cancer cell invasion and immune cell responses. Symmetry breaking of the positioning of organelles and the cell shape are often associated with these biological functions. One of the main players in symmetry breaking at the cellular scale is the actin cytoskeleton, comprising actin filaments and myosin motors that generate contractile forces. However, because the self-organization of the actomyosin network is regulated by the biochemical signaling in cells, how the mechanical contraction of the actin cytoskeleton induces diverse self-organized behaviors and drives the cell-scale symmetry breaking remains unclear. In recent times, to understand the physical underpinnings of the symmetry breaking exhibited in the actin cytoskeleton, artificial cell models encapsulating the cytoplasmic actomyosin networks covered with lipid monolayers have been developed. By decoupling the actomyosin mechanics from the complex biochemical signaling within living cells, this system allows one to study the self-organization of actomyosin networks confined in cell-sized spaces. We review the recent developments in the physics of confined actomyosin networks and provide future perspectives on the artificial cell-based approach. This review article is an extended version of the Japanese article, The Physical Principle of Cell Migration Under Confinement: Artificial Cell-based Bottom-up Approach, published in SEIBUTSU BUTSURI Vol. 63, p. 163-164 (2023).

Membrane tension induces F-actin reorganization and flow in a biomimetic model cortex

The accumulation and transmission of mechanical stresses in the cell cortex and membrane determines the mechanics of cell shape and coordinates essential physical behaviors, from cell polarization to cell migration. However, the extent that the membrane and cytoskeleton each contribute to the transmission of mechanical stresses to coordinate diverse behaviors is unclear. Here, we reconstitute a minimal model of the actomyosin cortex within liposomes that adheres, spreads and ultimately ruptures on a surface. During spreading, accumulated adhesion-induced (passive) stresses within the membrane drive changes in the spatial assembly of actin. By contrast, during rupture, accumulated myosin-induced (active) stresses within the cortex determine the rate of pore opening. Thus, in the same system, devoid of biochemical regulation, the membrane and cortex can each play a passive or active role in the generation and transmission of mechanical stress, and their relative roles drive diverse biomimetic physical behaviors.

Keeping the focus on biophysics and actin filaments in Nagoya: A report of the 2016 "now in actin" symposium

Regulatory systems in living cells are highly organized, enabling cells to response to various changes in their environments. Actin polymerization and depolymerization are crucial to establish cytoskeletal networks to maintain muscle contraction, cell motility, cell division, adhesion, organism development and more. To share and promote the biophysical understanding of such mechanisms in living creatures, the "Now in Actin Study: -Motor protein research reaching a new stage-" symposium was organized at Nagoya University, Japan on 12 and 13, December 2016. The organizers invited emeritus professor of Nagoya and Osaka Universities Fumio Oosawa and leading scientists worldwide as keynote speakers, in addition to poster presentations on cell motility studies by many researchers. Studies employing various biophysical, biochemical, cell and molecular biological and mathematical approaches provided the latest understanding of mechanisms of cell motility functions driven by actin, microtubules, actin-binding proteins, and other motor proteins.

Giant vesicles as cell models

Tremendous progress has been made in recent years in understanding the working of the living cell, including its micro-anatomy, signalling networks, and regulation of genes. However, an understanding of cellular phenomena using fundamental laws starting from first principles is still very far away. Part of the reason is that a cell is an active and exquisitely complex system where every part is linked to the other. Thus, it is difficult or even impossible to design experiments that selectively and exclusively probe a chosen aspect of the cell. Various kinds of idealised systems and cell models have been used to circumvent this problem. An important example is a giant unilamellar vesicle (GUV, also called giant liposome), which provides a cell-sized confined volume to study biochemical reactions as well as self-assembly processes that occur on the membrane. The GUV membrane can be designed suitably to present selected, correctly-oriented cell-membrane proteins, whose mobility is confined to two dimensions. Here, we present recent advances in GUV design and the use of GUVs as cell models that enable quantitative testing leading to insight into the working of real cells. We briefly recapitulate important classical concepts in membrane biophysics emphasising the advantages and limitations of GUVs. We then present results obtained over the last decades using GUVs, choosing the formation of membrane domains and cell adhesion as examples for in-depth treatment. Insight into cell adhesion obtained using micro-interferometry is treated in detail. We conclude by summarising the open questions and possible future directions.

Minimal systems to study membrane-cytoskeleton interactions

In the context of minimal systems design, there are two areas in which the reductionist approach has been particularly successful: studies of molecular motors on cytoskeletal filaments, and of protein-lipid interactions in model membranes. However, a minimal cortex, that is, the interface between membrane and cytoskeleton, has just begun to be functionally reconstituted. A key property of living cells is their ability to change their shape in response to extracellular and intracellular stimuli. Although studied in live cells since decades, the mutual dependence between cytoskeleton and membrane dynamics in these large-scale transformations is still poorly understood. Here we report on inspiring recent in vitro work in this direction, and the promises it holds for a better understanding of key cellular processes.

Flexible macromolecules attached to lipid bilayers: impact on fluidity, curvature, permeability and stability of the membranes

This review summarizes recent investigations on the association of macromolecules on lipid bilayers. Hydrophilic and flexible polymers can form soft coronae tenuously adsorbed or anchored on the lipid membrane. Other synthetic macromolecules are embedded in the apolar region of the membrane. Recent experimental and theoretical works focus on the perturbation of lipid properties achieved depending on the nature and strength of binding. Of importance to biomimicry, to tethered model membranes, and drug carriers, the effects achievable include modulation of the lateral diffusivity of lipids, shape distortions, lateral segregations, formation of well-defined nanopores and ultimately the stimuli responsive disruption of the membrane.

Liposome-encapsulated actin–hemoglobin (LEAcHb) artificial blood substitutes

A new approach to enhance the circulation persistence of liposomes has been applied to develop liposome-encapsulated actin-hemoglobin (LEAcHb) dispersions as potential blood substitutes by introducing an actin matrix into the liposome aqueous core. Asymmetric flow field-flow fractionation coupled with multi-angle static light scattering was used to study the shape, size distribution, and encapsulation efficiency of liposome-encapsulated hemoglobin (LEHb) and LEAcHb dispersions. By polymerizing monomeric actin into filamentous actin inside the liposome aqueous core, LEAcHb particles transformed into a disk-like shape. We studied the effect of an encapsulated actin matrix on the size distribution, hemoglobin (Hb) encapsulation efficiency, oxygen affinity, and methemoglobin (MetHb) level of LEAcHb dispersions, and compared them with plain LEHb dispersions (without actin). LEHb, and LEAcHb dispersions extruded through 400 nm membranes were injected into rats and it was observed that LEAcHb dispersions with 1mg/mL of actin enhanced the circulatory half-life versus LEHb dispersions. The circulatory characteristics of empty PEGylated and non-PEGylated actin-containing liposomes (without Hb) were studied as controls for the LEHb and LEAcHb dispersions in this paper, which displayed maximum circulatory half-lives greater than 72 h. Taken together the results of this study supports our hypothesis that a lipid membrane supported by an underlying actin matrix will extend the circulatory half-life of LEHb dispersions.

Structure of small actin-containing liposomes probed by atomic force microscopy: effect of actin concentration & liposome size

Actin-containing liposomes were prepared via extrusion through 400 and 600 nm pore diameter membranes at different monomeric actin concentrations in low ionic strength buffer (G-buffer). After subjecting the liposome dispersions to high ionic strength polymerization buffer (F-buffer), topological changes in liposome structure were studied using atomic force microscopy (AFM). Paired dumbbell, horseshoelike, and disklike assemblies were observed for actin-containing liposomes extruded through 400 and 600 nm pore diameter membranes. The topology of actin-containing liposomes was found to be highly dependent on both liposome size and actin concentration. At 1 mg/mL actin, the actin-containing liposomes transformed into a disklike shape, whereas, at 5 mg/mL actin, the actin-containing liposomes retained a spherical shape. On the basis of these observations, we hypothesize that actin could either polymerize on the surface of the inner leaflet of the liposome membrane or polymerize in the aqueous core of the liposome. We explain the associated shape changes induced in actin-containing liposomes on the basis of the hypothesized mechanism of actin polymerization inside the liposomes. At higher actin concentrations (5 mg/mL), we observed membrane-induced actin self-assembly in G-buffer, which implies that G-actin is able to interact directly with lipid bilayers at sufficiently high concentrations.

Effect of actin concentration on the structure of actin-containing liposomes

Liposomes encapsulating monomeric actin (G-actin) were produced via extrusion through 400 and 600 nm pore diameter polycarbonate membranes in low ionic strength buffer (G-buffer). After actin-containing liposomes were subjected to high ionic strength polymerization buffer (F-buffer), morphological changes in the structure of actin-containing liposomes were studied using asymmetric flow field-flow fractionation (AFFF) coupled with multiangle static light scattering (MASLS). The general shape of these liposomes was initially determined by fitting three form factors, which describe the angular distribution of scattered light from a spherical thin shell, thin disk, and thin rod, to the experimentally measured light scattering spectra to regress the dimensions of the liposomes corresponding to the proposed geometry. Light scattering spectra that yielded a best fit to the thin disk model were analyzed further and fit to the ellipsoidal of revolution form factor to regress both the major and minor axis dimensions. The results of this analysis showed that actin-containing liposomes extruded through 400 and 600 nm pore diameter membranes in F-buffer, at a low actin concentration (0.1 mg/mL), assumed a spherical shape, which is also the case for plain liposomes (no actin present) in G-buffer and F-buffer. When the actin concentration was increased to 1 mg/mL, the polymerizing actin filaments stretched the initially spherical liposome into a disklike shape. However, when the actin concentration was further increased to 5 mg/mL, the liposomes reverted back to a spherical shape.

Cytochalasin D as excitation-contraction uncoupler for optically mapping action potentials in wedges of ventricular myocardium

INTRODUCTION

Cytochalasin D in tissue bath superfusate inhibits the contraction of isolated thin trabeculae from canine right ventricle without affecting the intracellular action potential recorded with glass microelectrode. The purpose of this study was to test whether cytochalasin D could also be used to immobilize perfused wedges of ventricular muscle without affecting the action potential duration or propagation, and also to determine the optimal concentration and time duration of drug in the perfusate.

METHODS AND RESULTS

Using a membrane potential sensitive dye, di-4-ANEPPS, and a high-resolution photodiode optical mapping system at a rate of 1,000 frames/sec, we recorded action potentials on the transmural surface of arterially perfused wedges of muscle from the canine left ventricular free wall. We also recorded arterial pulse pressure as a surrogate for tissue contraction. Cytochalasin D at > or = 20 micromol/L in the perfusate for > or = 6 minutes reduced the arterial pulse pressure to approximately one tenth of its initial value and significantly reduced or eliminated motion artifacts in the action potentials. A sustained concentration of 10 micromol/L cytochalasin D in the perfusate prevented contraction from recurring after the tissue was immobilized with an initial concentration of 25 micromol/L. Cytochalasin D had little effect on the action potential duration and on its transmural gradient, and did not slow the transmural velocity of excitation propagation.

CONCLUSION

Cytochalasin D can be used to uncouple excitation and contraction in perfused canine cardiac muscle for the fluorescent-optical mapping of action potentials without affecting action potential duration or slowing transmural propagation.

Formation of giant liposomes promoted by divalent cations: critical role of electrostatic repulsion

Spontaneous formation of giant unilamellar liposomes in a gentle hydration process, as well as the adhesion energy between liposomal membranes, has been found to be dependent on the concentration of divalent alkali cations, Ca2+ or Mg2+, in the medium. With electrically neutral phosphatidylcholine (PC), Ca2+ or Mg2+ at 1-30 mM greatly promoted liposome formation compared to low yields in nonelectrolyte or potassium chloride solutions. When negatively charged phosphatidylglycerol (PG) was mixed at 10%, the yield was high in nonelectrolytes but liposomes did not form at 3-10 mM CaCl2. In the adhesion test with micropipette manipulation, liposomal membranes adhered to each other only in a certain range of CaCl2 concentrations, which agreed with the range where liposome did not form. The adhesion range shifted to higher Ca2+ concentrations as the amount of PG was increased. These results indicate that the divalent cations bind to and add positive charges to the lipids, and that membranes are separated and stabilized in the form of unilamellar liposomes when net charges on the membranes produce large enough electrostatic repulsion. Under the assumption that the maximum of adhesion energy within an adhesive range corresponds to exact charge neutralization by added Ca2+, association constants of PC and PG for Ca2+ were estimated at 7.3 M(-1) and 86 M(-1), respectively, in good agreement with literature values.

The auxin response of actin is altered in the rice mutant Yin-Yang

The rice mutant Yin-Yang has been selected during a screen for resistance to cytoskeletal drugs and is characterized by alterations in epidermal cell length and a precocious onset of gravitropism. The elongation response of coleoptile segments to auxin does not reveal changes of auxin sensitivity in Yin-Yang. However, in contrast to the wild type, cell elongation in Yin-Yang is highly sensitive to the actin-polymerisation blocker cytochalasin D. This increased sensitivity to cytochalasin D requires optimal concentrations of auxin to become manifest. The auxin response of actin microfilaments in epidermal cells differs between wild type and mutant. In the wild type, the longitudinal microfilament bundles become loosened in response to auxin. In the mutant, these bundles disintegrate partially and are replaced by a network of short filaments surrounding the nucleus. Several aspects of the mutant phenotype can be mimicked in the wild type by treatment with cytochalasin D. The mutant phenotype is discussed in terms of signal-dependent changes of actin dynamics and the putative role of actin during cell elongation.

Preparation of giant liposomes in physiological conditions and their characterization under an optical microscope

Unilamellar liposomes with diameters of 25-100 microns were prepared in various physiological salt solutions, e.g., 100 mM KCl plus 1 mM CaCl2. Successful preparation of the giant liposomes at high ionic strengths required the inclusion of 10-20% of a charged lipid, such as phosphatidylglycerol, phosphatidylserine, phosphatidic acid, or cardiolipin, in phosphatidylcholine or phosphatidylethanolamine. Three criteria were employed to identify unilamellar liposomes, yielding consistent results. Under a phase-contrast microscope those liposomes that showed the thinnest contour and had a vigorously undulating membrane were judged unilamellar. When liposomes were stained with the lipophilic fluorescent dye octadecyl rhodamine B, fluorescence intensities of the membrane of individual liposomes were integer multiples (up to four) of the lowest ones, the least fluorescent liposomes being those also judged unilamellar in the phase-contrast image. Micropipette aspiration test showed that the liposomes judged unilamellar in phase and fluorescence images had an area elastic modulus of approximately 160 dyn/cm, in agreement with literature values. The giant liposomes were stable and retained a concentration gradient of K+ across the membrane, as evidenced in fluorescence images of the K(+)-indicator PBFI encapsulated in the liposomes. Ionophore-induced K+ transport and associated volume change were observed in individual liposomes.