Atomic force microscope imaging of phospholipid bilayer degradation by phospholipase A2

Melittin-Phospholipase A2 Synergism Is Mediated by Liquid-Liquid Miscibility Phase Transition in Giant Unilamellar Vesicles

The primary constituents of honeybee venom, melittin and phospholipase A2 (PLA2), display toxin synergism in which the PLA2 activity is significantly enhanced by the presence of melittin. It has been shown previously that this is accomplished by the disruption in lipid packing, which allows PLA2 to become processive on the membrane surface. In this work, we show that melittin is capable of driving miscibility phase transition in giant unilamellar vesicles (GUVs) and that it raises the miscibility transition temperature (Tmisc) in a concentration-dependent manner. The induced phase separation enhances the processivity of PLA2, particularly at its boundaries, where a substantial difference in domain thickness creates a membrane discontinuity. The catalytic action of PLA2, in response, induces changes in the membrane, rendering it more conducive to melittin binding. This, in turn, facilitates further lipid phase separation and eventual vesicle lysis. Overall, our results show that melittin has powerful membrane-altering capabilities that activate PLA2 in various membrane contexts. More broadly, they exemplify how this biochemical system actively modulates and capitalizes on the spatial distribution of membrane lipids to efficiently achieve its objectives.

sPLA2 Wobbles on the Lipid Bilayer between Three Positions, Each Involved in the Hydrolysis Process

Secreted phospholipases A2 (sPLA2s) are peripheral membrane enzymes that hydrolyze phospholipids in the sn-2 position. The action of sPLA2 is associated with the work of two active sites. One, the interface binding site (IBS), is needed to bind the enzyme to the membrane surface. The other one, the catalytic site, is needed to hydrolyze the substrate. The interplay between sites, how the substrate protrudes to, and how the hydrolysis products release from, the catalytic site remains in the focus of investigations. Here, we report that bee venom PLA2 has two additional interface binding modes and enzyme activity through constant switching between three different orientations (modes of binding), only one of which is responsible for substrate uptake from the bilayer. The finding was obtained independently using atomic force microscopy and molecular dynamics. Switching between modes has biological significance: modes are steps of the enzyme moving along the membrane, product release in biological milieu, and enzyme desorption from the bilayer surface.

Revealing local molecular distribution, orientation, phase separation, and formation of domains in artificial lipid layers: Towards comprehensive characterization of biological membranes

Lipids, together with molecules such as DNA and proteins, are one of the most relevant systems responsible for the existence of life. Selected lipids are able to assembly into various organized structures, such as lipid membranes. The unique properties of lipid membranes determine their complex functions, not only to separate biological environments, but also to participate in regulatory functions, absorption of nutrients, cell-cell communication, endocytosis, cell signaling, and many others. Despite numerous scientific efforts, still little is known about the reason underlying the variability within lipid membranes, and its biochemical significance. In this review, we discuss the structural complexity of lipid membranes, as well as the importance to simplify studied systems in order to understand phenomena occurring in natural, complex membranes. Such systems require a model interface to be analyzed. Therefore, here we focused on analytical studies of artificial systems at various interfaces. The molecular structure of lipid membranes, specifically the nanometric thickens of molecular bilayer, limits in a major extent the choice of highly sensitive methods suitable to study such structures. Therefore, we focused on methods that combine high sensitivity, and/or chemical selectivity, and/or nanometric spatial resolution, such as atomic force microscopy, nanospectroscopy (tip-enhanced Raman spectroscopy, infrared nanospectroscopy), phase modulation infrared reflection-absorption spectroscopy, sum-frequency generation spectroscopy. We summarized experimental and theoretical approaches providing information about molecular structure and composition, lipid spatial distribution (phase separation), organization (domain shape, molecular orientation) of lipid membranes, and real-time visualization of the influence of various molecules (proteins, drugs) on their integrity. An integral part of this review discusses the latest achievements in the field of lipid layer-based biosensors.

Single-molecule phospholipase A2 becomes processive on melittin-induced membrane deformations

While it is established that the topology of lipid membranes plays an important role in biochemical processes, few direct observations exist regarding how the membranes are actively restructured and its consequences on subsequent reactions. In this work, we investigated how the two major components of bee venom, melittin and phospholipase A₂ (PLA₂), achieve activation by such membrane remodeling. Their membrane-disrupting functions have been reported to increase when both are present, but the mechanism of this synergism had not been established. Using membrane reconstitution, we found that melittin can form large-scale membrane deformities upon which PLA₂ activity is 25-fold higher. Tracking of single-molecule PLA₂ revealed that its processive behavior on these deformities underlies the enhanced activity. These results show how melittin and PLA₂ work synergistically to enhance the lytic effects of the bee venom. More broadly, they also demonstrate how the membrane topology may be actively altered to modulate cellular membrane-bound reactions.

High-speed atomic force microscopy to study pore-forming proteins

Pore-forming proteins (PFPs) include virulence factors that are produced by many pathogenic bacteria. However, PFPs also comprise non-virulence factors, such as apoptotic Bcl2-like proteins, and also occur in non-pathogenic bacteria and indeed in all kingdoms of life. Pore-forming proteins are an ancient class of proteins, which are tremendously powerful in damaging cell membranes. In general, upon binding to lipid membranes, they convert from the soluble monomeric form into an oligomeric state, and then undergo a dramatic conformational change to form transmembrane pores. Thus, PFPs render the plasma membrane of their target cells permeable to solutes, potentially leading to cell death, or to more subtle manipulations of cellular functions. Recent cryo-EM and X-ray crystallography studies revealed high-resolution structures of several PFPs in their pre-pore and pore states, however many aspects regarding the cues that induce pore formation, the pre-pore to pore conformational transition, the mechanism of membrane permeation and associated dynamics are still less well understood, and direct visualization of the dynamics of these transitions are missing. Using high-speed atomic force microscopy (HS-AFM), the kinetics of oligomerization and the pre-pore to pore transition dynamics of various PFPs, such as Listeriolysin O (LLO), lysenin, and Perforin-2 (PFN2), could be studied. These studies revealed that LLO does not form pores of regular shape or size, but rather forms membrane inserted arcs that propagate and damage lipid membranes as lineactants. In contrast, lysenin forms stable pre-pore and pore nonameric rings and HS-AFM allowed to study their diffusion on and the pH-dependent insertion into the membrane. Similarly, PFN2 underwent pre-pore to pore transition upon acidification. The openness of the HS-AFM system allowed the transition to be imaged in real time and revealed that all observed molecules transitioned into the pore state within 3s. In this chapter, we detail protocols to prepare lipids, form supported lipid bilayers, and provide guidelines for real-time, real-space HS-AFM observations of PFPs in action.

Label-Free, Real-Time Phospholipase-A Isoform Assay

Phospholipase-A (PLA) enzymes catalyze the hydrolysis of ester bonds in select glycerophospholipids. Sensors for rapidly measuring the PLA activity in biological samples have relevance in the study of venom compositions and in medical diagnostics for the diagnosis of diseases such as acute pancreatitis. Current PLA sensor technologies are often restricted by the time it takes to prepare an assay, the necessity of using fluorescent labels, or the fact they might require strict pH control of the buffer vehicles used. Here we present a tethered bilayer lipid membrane (tBLM) impedance sensor array for the rapid and real-time detection of PLA, which includes the ability to selectively detect phospholipase-A₂ (PLA₂) from phospholipase-A₁ (PLA₁) isoforms. Comparing the activity of PLA₁ and PLA₂ in an array of tBLMs composed of ether phospholipids, ester phospholipids or ether-ester phospholipids allows for the rapid and reliable distinction between the isoforms, as measured using swept-frequency electrical impedance spectroscopy. After testing the assay using pure enzymes, we demonstrate the capacity of the sensor to identify specific PLA₂-type, calcium-dependent activity from the venom of the South American bullet ant, Paraponera clavata, at a concentration of 1 μg/mL. The specificity of the phospholipase activity was corroborated using matrix-assisted laser-desorption/ionization time-of-flight mass spectrometry. As further validation, we tested the activities of a PLA₁ isoform in the presence of different buffers commonly used in biology and biochemistry experiments. Sensitivity testing shows that PLA₁ can be detected at an activity as low as 0.06 U/mL. The rapid and reliable detection of phospholipases presented in this study has potential applications in the study of animal venoms as well as in lipase bioreactors and point-of-care devices.

Illustrating Interfacial Interaction between Honey Bee Venom Phospholipase A2 and Supported Negatively Charged Lipids with Sum Frequency Generation and Laser Scanning Confocal Microscopy

Phospholipase A₂ is an important enzyme species which can widely be found in animals, plants, bacteria, and so on. A large number of studies have shown that phospholipase A₂ is highly catalytic toward the lipids. Here, sum frequency generation (SFG) vibrational spectroscopy and laser scanning confocal microscopy (LSCM) were applied to study the interaction between honey bee venom phospholipase A₂ (bvPLA₂) and the negatively charged DPPG bilayer. In both cases without and with the calcium ions (Ca²⁺), the bvPLA₂ molecules were adsorbed onto the outer leaflet surface with the orientational order, and the adsorbed bvPLA₂ molecules damaged the order of the packed outer leaflet. In comparison to the case without Ca²⁺, the addition of Ca²⁺ can accelerate the attaching process of bvPLA₂ to the outer leaflet surface and decelerate the process of damaging the outer leaflet order. The experimental result also confirmed, with the help of the Ca²⁺, the DPPG molecules in the outer leaflet were hydrolyzed, with both hydrolysates, that is, lysophospholipids and fatty acids, remaining at the interface, showing a distinct difference from previous published literatures regarding neutral lipids [Phys. Chem. Chem. Phys. 2018, 20, 63-67] and PLA₁ [Langmuir 2019, 35, 12831-12838].

Selective Isotopic Labeling Resolves the Gel-to-Fluid Phase Transitions of the Individual Leaflets of a Planar-Supported Phospholipid Bilayer

Knowledge of the thermotropic phase behavior of solid-supported bilayer lipid assemblies is essential to mimick the molecular organization and lateral fluidity of cell membranes. The gel-to-fluid phase transitions in a homologous series of single phospholipid bilayers supported on planar silicon substrates were investigated by temperature-controlled atomic force microscopy and attenuated total reflection infrared spectroscopy to obtain complementary information at the mesoscopic and molecular scales. Symmetric bilayers of dipalmitoylphosphatidylcholine (DPPC) and vertically asymmetric bilayers composed of a leaflet of DPPC and another of acyl-chain-deuterated DPPC (DPPC-d₆₂) were prepared by the Langmuir-Blodgett technique. The selective deuteration of one of the bilayer leaflets enabled the simultaneous monitoring by IR spectroscopy of the acyl chain melting in each leaflet via the spectrally isolated CH₂ and CD₂ stretching vibrations. Two gel-to-fluid transitions were discerned for both the symmetric and asymmetric bilayers in ultrapure water. The deuterium isotope effect observed in free-standing membranes was maintained for the supported bilayers. IR spectroscopy revealed that the melting of one leaflet promotes the disordering of the acyl chains in the adjacent one. The findings suggest that the two leaflet phase transitions do not evolve in isolation. This work sheds insight into the nature of leaflet-leaflet interactions and the thermodynamic properties of surface-confined phospholipid bilayers.

Lysophospholipids Facilitate COPII Vesicle Formation

Coat protein complex II (COPII) proteins form vesicles from the endoplasmic reticulum to export cargo molecules to the Golgi apparatus. Among the many proteins involved in this process, Sec12 is a key regulator, functioning as the guanosine diphosphate (GDP) exchange factor for Sar1p, the small guanosine triphosphatase (GTPase) that initiates COPII assembly. Here we show that overexpression of phospholipase B3 in the thermosensitive sec12-4 mutant partially restores growth and protein transport at non-permissive temperatures. Lipidomics analyses of these cells show a higher content of lysophosphatidylinositol (lysoPI), consistent with the lipid specificity of PLB3. Furthermore, we show that lysoPI is specifically enriched in COPII vesicles isolated from in vitro budding assays. As these results suggested that lysophospholipids could facilitate budding under conditions of defective COPII coat dynamics, we reconstituted COPII binding onto giant liposomes with purified proteins and showed that lysoPI decreases membrane rigidity and enhances COPII recruitment to liposomes. Our results support a mechanical facilitation of COPII budding by lysophospholipids.

•

COPII mutant sec12-4 is rescued by the overexpression of an ER resident phospholipase

•

Lipidomic analysis of COPII vesicles shows enrichment in lysophospholipids

•

Recruitment of COPII proteins to liposomes increases in presence of lysophospholipids

•

Lysophosphatidylinositol lowers the rigidity of membranes in vitro

Reversible Cation-Selective Attachment and Self-Assembly of Human Tau on Supported Brain Lipid Membranes

Misfolding and aggregation of the neuronal, microtubule-associated protein tau is involved in the pathogenesis of Alzheimer's disease and tauopathies. It has been proposed that neuronal membranes could play a role in tau release, internalization, and aggregation and that tau aggregates could exert toxicity via membrane permeabilization. Whether and how tau interacts with lipid membranes remains a matter of discussion. Here, we characterize the interaction of full-length human tau (htau40) with supported lipid membranes (SLMs) made from brain total lipid extract by time-lapse high-resolution atomic force microscopy (AFM). We observe that tau attaches to brain lipid membranes where it self-assembles in a cation-dependent manner. Sodium triggers the attachment, self-assembly, and growth, whereas potassium inhibits these processes. Moreover, tau assemblies are stable in the presence of sodium and lithium but disassemble in the presence of potassium and rubidium. Whereas the pseudorepeat domains (R1-R4) of htau40 promote the sodium-dependent attachment to the membrane and stabilize the tau assemblies, the N-terminal region promotes tau self-assembly and growth.

Time lapse AFM on vesicle formation from mixed lipid bilayers induced by the membrane-active peptide melittin

Melittin is a model system for the action of antimicrobial peptides which are potential candidates for novel antibiotics. We investigated the membrane lysis effect of melittin on phase-separated supported lipid bilayers (DOPC-DPPC) by atomic force microscopy. AFM images show that the peptide first forms defects at the interface between the two lipid phases and then degrades preferentially the liquid-phase DOPC-enriched domains. Vesicular structures of 10-20 nm radius were observed to form, suggesting a mixed carpet-toroidal model mechanism for the resolved action of melittin.

Imaging modes of atomic force microscopy for application in molecular and cell biology

Atomic force microscopy (AFM) is a powerful, multifunctional imaging platform that allows biological samples, from single molecules to living cells, to be visualized and manipulated. Soon after the instrument was invented, it was recognized that in order to maximize the opportunities of AFM imaging in biology, various technological developments would be required to address certain limitations of the method. This has led to the creation of a range of new imaging modes, which continue to push the capabilities of the technique today. Here, we review the basic principles, advantages and limitations of the most common AFM bioimaging modes, including the popular contact and dynamic modes, as well as recently developed modes such as multiparametric, molecular recognition, multifrequency and high-speed imaging. For each of these modes, we discuss recent experiments that highlight their unique capabilities.

DPPTE Thiolipid Self-Assembled Monolayer: A Critical Assay

Supported lipid membranes represent an elegant way to design a fluid interface able to mimic the physicochemical properties of biological membranes, with potential biotechnological applications. In this work, a diacyl phospholipid, the 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol (DPPTE), functionalized with a thiol group, was immobilized on a gold surface. In this molecule, the thiol group, responsible for the Au-S bond (45 kJ/mol) is located on the phospholipid polar head, letting the hydrophobic chain protrude from the film. This system is widely used in the literature but is no less challenging, since its characterization is not complete, as several discordant data have been obtained. In this work, the film was characterized by cyclic voltammetry blocking experiments, to verify the SAM formation, and by reductive desorption measurements, to estimate the molecular density of DPPTE on the gold surface. This value has been compared to that obtained by quartz crystal microbalance measurements. Ellipsometry and impedance spectroscopy measurements have been performed to obtain information about the monolayer thickness and capacitance. The film morphology was investigated by atomic force microscopy. Finally, Monte Carlo simulations were carried out, in order to gain molecular information about the morphologies of the DPPTE SAM and compare them to the experimental results. We demonstrate that DPPTE molecules, incubated 18 h below the phase transition temperature (T = 41.1 ± 0.4 °C) in ethanol solution, are able to form a self-assembled monolayer on the gold surface, with domain structures of different order, which have never been reported before. Our results make possible rationalization of the scattered results so far obtained on this system, giving a new insight into the formation of phospholipids SAMs on a gold surface.

Nanoscale investigation of the interaction of colistin with model phospholipid membranes by Langmuir technique, and combined infrared and force spectroscopies

Colistin (Polymyxin E), an antimicrobial peptide, is increasingly put forward as salvage for severe multidrug-resistant infections. Unfortunately, colistin is potentially toxic to mammalian cells. A better understanding of the interaction with specific components of the cell membranes may be helpful in controlling the factors that may enhance toxicity. Here, we report a physico-chemical study of model phospholipid (PL) mono- and bilayers exposed to colistin at different concentrations by Langmuir technique, atomic force microscopy (AFM) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The effect of colistin on chosen PL monolayers was examined. Insights into the topographical and elastic changes in the PL bilayers within time after peptide injection are presented via AFM imaging and force spectra. Finally, changes in the PL bilayers' ATR-FTIR spectra as a function of time within three bilayer compositions, and the influence of colistin on their spectral fingerprint are examined together with the time-evolution of the Amide II and νCO band integrated intensity ratios. Our study reveals a great importance in the role of the PL composition as well as the peptide concentration on the action of colistin on PL model membranes.

Nonspecific Binding Domains in Lipid Membranes Induced by Phospholipase A2

Phospholipase A2 (PLA2) is a peripheral membrane protein that can hydrolyze phospholipids to produce lysolipids and fatty acids. It has been found to play crucial roles in various cellular processes and is thought as a potential candidate for triggering drug release from liposomes for medical treatment. Here, we directly observed that PLA2 hydrolysis reaction can induce the formation of PLA2-binding domains at lipid bilayer interface and found that the formation was significantly influenced by the fluidity of the lipid bilayer. We prepared supported lipid bilayers (SLBs) with various molar ratios of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) to adjust the reactivity and fluidity of the lipid bilayers. A significant amount of the PLA2-induced domains was observed in mixtures of DPPC and DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine) but not in either pure DPPC or pure DOPC bilayer, which might be the reason that previous studies rarely observed these domains in lipid bilayer systems. The fluorescently labeled PLA2 experiment showed that newly formed domains acted as binding templates for PLA2. The AFM result showed that the induced domain has stepwise plateau structure, suggesting that PLA2 hydrolysis products may align as bilayers and accumulate layer by layer on the support, and the hydrophobic acyl chains at the side of the layer structure may be exposed to the outside aqueous environment. The introduced hydrophobic region could have hydrophobic interactions with proteins and therefore can attract the binding of not only PLA2 but also other types of proteins such as proteoglycans and streptavidin. The results suggest that the formation of PLA2-induced domains may convert part of a zwitterionic nonsticky lipid membrane to a site where biomolecules can nonspecifically bind.

Enzymatic reactions in confined environments

Within each biological cell, surface- and volume-confined enzymes control a highly complex network of chemical reactions. These reactions are efficient, timely, and spatially defined. Efforts to transfer such appealing features to in vitro systems have led to several successful examples of chemical reactions catalysed by isolated and immobilized enzymes. In most cases, these enzymes are either bound or adsorbed to an insoluble support, physically trapped in a macromolecular network, or encapsulated within compartments. Advanced applications of enzymatic cascade reactions with immobilized enzymes include enzymatic fuel cells and enzymatic nanoreactors, both for in vitro and possible in vivo applications. In this Review, we discuss some of the general principles of enzymatic reactions confined on surfaces, at interfaces, and inside small volumes. We also highlight the similarities and differences between the in vivo and in vitro cases and attempt to critically evaluate some of the necessary future steps to improve our fundamental understanding of these systems.

Effect of the enzymatically modified supported dipalmitoylphosphatidylcholine (DPPC) bilayers on calcium carbonate formation

After an hour contact with a phospholipase A₂ (PLA₂) solution, only the outer leaflet of the dipalmitoylphosphatidylcholine (DPPC) bilayers supported on mica surface underwent hydrolysis whose products, i.e., palmitic acid and lysophospholipid, accumulated on the bilayer surface. Only calcite was present on the bare mica and enzymatically unmodified and modified supported DPPC bilayers soaked for 2 weeks at 25 and 37 °C in a solution of initial pH equals to 7.4 and 9.2 containing calcium and bicarbonate ions at their concentrations about those of human blood plasma. The DPPC bilayers accelerate the crystal growth at lower pH and favors CaCO₃ nucleation at higher pH. Enzymatic modification of bilayers does not affect crystal morphology and its organization on the examined surface but causes a slight crystal size increase at lower pH and significantly reduces crystal size at alkaline pH. The temperature increase leads to the formation of bigger crystals under physiological pH and has almost no effect on crystal size at alkaline pH. The obtained results are probably attributed to Ca²⁺ interaction with a specific polar site on the surface of the membrane and DPPC hydrolysis products acting as nucleation centers.

Phase transition behaviors of the supported DPPC bilayer investigated by sum frequency generation (SFG) vibrational spectroscopy and atomic force microscopy (AFM)

The phase transition behaviors of a supported bilayer of dipalmitoylphosphatidyl-choline (DPPC) have been systematically evaluated by in situ sum frequency generation (SFG) vibrational spectroscopy and atomic force microscopy (AFM).

Thermomyces lanuginosus lipase-catalyzed hydrolysis of the lipid cubic liquid crystalline nanoparticles

In this study well-ordered glycerol monooleate (GMO)-based cubic liquid crystalline nanoparticles (LCNPs) have been used as substrates for Thermomyces lanuginosus lipase in order to establish the relation between the catalytic activity, measured by pH-stat titration, and the change in morphology and nanostructure determined by cryogenic transmission electron microscopy and synchrotron small angle X-ray diffraction. The initial lipase catalyzed LCNP hydrolysis rate is approximately 25% higher for large 350nm nanoparticles compared to the small 190nm particles, which is attributed to the increased number of structural defects on the particle surface. At pH 8.0 and 8.4 bicontinuous Im3m cubic LCNPs transform into "sponge"-like assemblies and disordered multilamellar onion-like structures upon exposure to lipase. At pH 6.5 and 7.5 lipolysis induced phase transitions of the inner core of the particles, following the sequence Im3m cubic → reversed hexagonal → reversed micellar Fd3m cubic → reversed micelles. These transitions to the liquid crystalline phases with higher negative curvature of the lipid/water interface were found to trigger protonation of the oleic acid produced during lipase catalyzed reaction. The increase curvature of the reversed discrete micellar cubic phase was suggested to cause an increase in the oleic acid pKa to a larger value observed by pH-stat titration.

Evaluation of characteristics and in vitro antioxidant properties of RSV loaded hyaluronic acid-DPPC microparticles as a wound healing system

Resveratrol (RSV) was incorporated into microparticles by spray drying to treat chronic wounds such as diabetic ulcers. RSV was chosen due to its defense mechanisms as the formation of free radicals delays the healing process. RSV was loaded into microparticles consisting of dipalmitoylphosphatidylcholine (DPPC) and hyaluronic acid (HA), a polysaccharide naturally present within the skin, known to contribute to the healing process. Microparticles were evaluated in terms of production yield, size distribution, encapsulation efficiency, morphology, specific surface area, thermal properties and water content. Spherical and homogenous microparticles (span ≤ 2) in a size range between 20 and 30 μm were obtained with high encapsulation efficiency (≥ 97%). The effect of enzymes (hyaluronidase, phospholipase and lipase) on RSV release showed a dose-dependent pattern followed by a slow release stage. Cytotoxicity/proliferation and oxidative stress parameters (glutathione, oxidized glutathione, glutathione peroxidase, malondialdehyde, superoxide dismutase) obtained from human dermal fibroblast cell cultures revealed that formulations increased cell proliferation and the presence of RSV decreased oxidation in cells. RSV-loaded HA-DPPC microparticles appear as a promising formulation for wound healing due to synergistic effect of the ingredients.

Phospholipase A2 isolated from the venom of Crotalus durissus terrificus inactivates dengue virus and other enveloped viruses by disrupting the viral envelope

The Flaviviridae family includes several virus pathogens associated with human diseases worldwide. Within this family, Dengue virus is the most serious threat to public health, especially in tropical and sub-tropical regions of the world. Currently, there are no vaccines or specific antiviral drugs against Dengue virus or against most of the viruses of this family. Therefore, the development of vaccines and the discovery of therapeutic compounds against the medically most important flaviviruses remain a global public health priority. We previously showed that phospholipase A₂ isolated from the venom of Crotalus durissus terrificus was able to inhibit Dengue virus and Yellow fever virus infection in Vero cells. Here, we present evidence that phospholipase A₂ has a direct effect on Dengue virus particles, inducing a partial exposure of genomic RNA, which strongly suggests inhibition via the cleavage of glycerophospholipids at the virus lipid bilayer envelope. This cleavage might induce a disruption of the lipid bilayer that causes a destabilization of the E proteins on the virus surface, resulting in inactivation. We show by computational analysis that phospholipase A₂ might gain access to the Dengue virus lipid bilayer through the pores found on each of the twenty 3-fold vertices of the E protein shell on the virus surface. In addition, phospholipase A₂ is able to inactivate other enveloped viruses, highlighting its potential as a natural product lead for developing broad-spectrum antiviral drugs.

Toward atomic force microscopy and mass spectrometry to visualize and identify lipid rafts in plasmodesmata

Plant cell-to-cell communication is mediated by nanopores called plasmodesmata (PDs) which are complex structures comprising plasma membrane (PM), highly packed endoplasmic reticulum and numerous membrane proteins. Although recent advances on proteomics have led to insights into mechanisms of transport, there is still an inadequate characterization of the lipidic composition of the PM where membrane proteins are inserted. It has been postulated that PDs could be formed by lipid rafts, however no structural evidence has shown to visualize and analyse their lipid components. In this perspective article, we discuss proposed experiments to characterize lipid rafts and proteins in the PDs. By using atomic force microscopy (AFM) and mass spectrometry (MS) of purified PD vesicles it is possible to determine the presence of lipid rafts, specific bound proteins and the lipidomic profile of the PD under physiological conditions and after changing transport permeability. In addition, MS can determine the stoichiometry of intact membrane proteins inserted in lipid rafts. This will give novel insights into the role of membrane proteins and lipid rafts on the PD structure.

Induction of caspase 3 activation by multiple Legionella pneumophila Dot/Icm substrates

The intracellular pathogen Legionella pneumophila is able to strike a balance between the death and survival of the host cell during infection. Despite the presence of high level of active caspase 3, the executioner caspase of apoptotic cell death, infected permissive macrophages are markedly resistant to exogenous apoptotic stimuli. Several bacterial molecules capable of promoting the cell survival pathways have been identified, but proteins involved in the activation of caspase 3 remain unknown. To study the mechanism of L. pneumophila-mediated caspase 3 activation, we tested all known Dot/Icm substrates for their ability to activate caspase 3. Five effectors capable of causing caspase 3 activation upon transient expression were identified. Among these, by using its ability to activate caspase 3 by inducing the release of cytochrome c from the mitochondria, we demonstrated that VipD is a phospholipase A2, which hydrolyses phosphatidylethanolamine (PE) and phosphocholine (PC) on the mitochondrial membrane in a manner that appears to require host cofactor(s). The lipase activity leads to the production of free fatty acids and 2-lysophospholipids, which destabilize the mitochondrial membrane and may contribute to the release of cytochrome c and the subsequent caspase 3 activation. Furthermore, we found that whereas it is not detectably defectively in caspase 3 activation in permissive cells, amutant lacking all of these five genes is less potent in inducing apoptosis in dendritic cells. Our results reveal that activation of host cell death pathways by L. pneumophila is a result of the effects of multiple bacterial proteins with diverse biochemical functions.

Uncovering ultrastructural defences in Daphnia magna--an interdisciplinary approach to assess the predator-induced fortification of the carapace

The development of structural defences, such as the fortification of shells or exoskeletons, is a widespread strategy to reduce predator attack efficiency. In unpredictable environments these defences may be more pronounced in the presence of a predator. The cladoceran Daphniamagna (Crustacea: Branchiopoda: Cladocera) has been shown to develop a bulky morphotype as an effective inducible morphological defence against the predatory tadpole shrimp Triopscancriformis (Crustacea: Branchiopoda: Notostraca). Mediated by kairomones, the daphnids express an increased body length, width and an elongated tail spine. Here we examined whether these large scale morphological defences are accompanied by additional ultrastructural defences, i.e. a fortification of the exoskeleton. We employed atomic force microscopy (AFM) based nanoindentation experiments to assess the cuticle hardness along with tapping mode AFM imaging to visualise the surface morphology for predator exposed and non-predator exposed daphnids. We used semi-thin sections of the carapace to measure the cuticle thickness, and finally, we used fluorescence microscopy to analyse the diameter of the pillars connecting the two carapace layers. We found that D. magna indeed expresses ultrastructural defences against Triops predation. The cuticle in predator exposed individuals is approximately five times harder and two times thicker than in control daphnids. Moreover, the pillar diameter is significantly increased in predator exposed daphnids. These predator-cue induced changes in the carapace architecture should provide effective protection against being crushed by the predator’s mouthparts and may add to the protective effect of bulkiness. This study highlights the potential of interdisciplinary studies to uncover new and relevant aspects even in extensively studied fields of research.

Diffusion and interaction dynamics of individual membrane protein complexes confined in micropatterned polymer-supported membranes

Micropatterned polymer-supported membranes (PSM) are established as a tool for confining the diffusion of transmembrane proteins for single molecule studies. To this end, a photochemical surface modification with hydrophobic tethers on a PEG polymer brush is implemented for capturing of lipid vesicles and subsequent fusion. Formation of contiguous membranes within micropatterns is confirmed by scanning force microscopy, fluorescence recovery after photobleaching (FRAP), and super-resolved single-molecule tracking and localization microscopy. Free diffusion of transmembrane proteins reconstituted into micropatterned PSM is demonstrated by FRAP and by single-molecule tracking. By exploiting the confinement of diffusion within micropatterned PSM, the diffusion and interaction dynamics of individual transmembrane receptors are quantitatively resolved.

A neurotoxic phospholipase A2 impairs yeast amphiphysin activity and reduces endocytosis

BACKGROUND

Presynaptically neurotoxic phospholipases A(2) inhibit synaptic vesicle recycling through endocytosis.

PRINCIPAL FINDINGS

Here we provide insight into the action of a presynaptically neurotoxic phospholipase A(2) ammodytoxin A (AtxA) on clathrin-dependent endocytosis in budding yeast. AtxA caused changes in the dynamics of vesicle formation and scission from the plasma membrane in a phospholipase activity dependent manner. Our data, based on synthetic dosage lethality screen and the analysis of the dynamics of sites of endocytosis, indicate that AtxA impairs the activity of amphiphysin.

CONCLUSIONS

We identified amphiphysin and endocytosis as the target of AtxA intracellular activity. We propose that AtxA reduces endocytosis following a mechanism of action which includes both a specific protein-protein interaction and enzymatic activity, and which is applicable to yeast and mammalian cells. Knowing how neurotoxic phospholipases A(2) work can open new ways to regulate endocytosis.

Interfacial binding dynamics of bee venom phospholipase A2 investigated by dynamic light scattering and quartz crystal microbalance

Bee venom phospholipase A(2) (bvPLA(2)) is part of the secretory phospholipase A(2) (sPLA(2)) family whose members are active in biological processes such as signal transduction and lipid metabolism. While controlling sPLA(2) activity is of pharmaceutical interest, the relationship between their mechanistic actions and physiological functions is not well understood. Therefore, we investigated the interfacial binding process of bvPLA(2) to characterize its biophysical properties and gain insight into how membrane binding affects interfacial activation. Attention was focused on the role of membrane electrostatics in the binding process. Although dynamic light scattering experiments indicated that bvPLA(2) does not lyse lipid vesicles, a novel, nonhydrolytic activity was discovered. We employed a supported lipid bilayer platform on the quartz crystal microbalance with dissipation sensor to characterize this bilayer-disrupting behavior and determined that membrane electrostatics influence this activity. The data suggest that (1) adsorption of bvPLA(2) to model membranes is not primarily driven by electrostatic interactions; (2) lipid desorption can follow bvPLA(2) adsorption, resulting in nonhydrolytic bilayer-disruption; and (3) this desorption is driven by electrostatic interactions. Taken together, these findings provide evidence that interfacial binding of bvPLA(2) is a dynamic process, shedding light on how membrane electrostatics can modulate interfacial activation.