Nerve regeneration across a 25-mm gap bridged by a polyglycolic acid-collagen tube: a histological and electrophysiological evaluation of regenerated nerves

Porous Organic Materials in Tissue Engineering: Recent Advances and Applications for Severed Facial Nerve Injury Repair

The prevalence of facial nerve injury is substantial, and the restoration of its structure and function remains a significant challenge. Autologous nerve transplantation is a common treatment for severed facial nerve injury; however, it has great limitations. Therefore, there is an urgent need for clinical repair methods that can rival it. Tissue engineering nerve conduits are usually composed of scaffolds, cells and neurofactors. Tissue engineering is regarded as a promising method for facial nerve regeneration. Among different factors, the porous nerve conduit made of organic materials, which has high porosity and biocompatibility, plays an indispensable role. This review introduces facial nerve injury and the existing treatment methods and discusses the necessity of the application of porous nerve conduit. We focus on the application of porous organic polymer materials from production technology and material classification and summarize the necessity and research progress of these in repairing severed facial nerve injury, which is relatively rare in the existing articles. This review provides a theoretical basis for further research into and clinical interventions on facial nerve injury and has certain guiding significance for the development of new materials.

Short-Term Collagen Nerve Wrapping Facilitates Motor and Sensory Recovery from Nerve Degeneration in a Sciatic Nerve Injury Rat Model

Purpose

This study used a sciatic nerve injury rat model to investigate the short-term effects of a polyglycolic acid (PGA)-collagen tube for nerve injury in continuity.

Materials and Methods

Sixteen female Wistar rats (6-8 weeks) were used, and the left sciatic nerve was crushed with a Sugita aneurysm clip. Sciatic nerve model rats were randomly categorized into two groups (n = 8; control group, n = 8; nerve wrapping group). Then, we measured four sensory thresholds, magnetically stimulated the lumbar region to induce motor-evoked potentials (MEPs), and evaluated the sciatic nerve histopathologically.

Results

In the sensory thresholds, there were significant differences for the main effect in 250 and 2000 Hz stimulation (p = 0.048 and 0.006, respectively). Further, a significant difference was observed with 2000 Hz stimulation at 1 week (p = 0.003). In the heat stimulation, there were significant differences for the main effect in both weeks and groups (p = 0.0002 and 0.0185, respectively). The post-hoc test showed a significant difference between groups only in 2W (p = 0.0283). Three weeks after the surgery, both 2nd and 3rd MEPs waves-related latencies in the nerve wrapping group were significantly shorter than those in the control group (p = 0.0207 and 0.0271, respectively). Histological evaluation of the sciatic nerve revealed considerable differences in the number of axons between the two groups (p = 0.0352).

Conclusion

The short-term PGA-collagen tube nerve wrapping facilitated motor and sensory recovery from nerve degeneration in the sciatic nerve injury rat model.

Development of 3D-Printed, Biodegradable, Conductive PGSA Composites for Nerve Tissue Regeneration

Nerve conduits are used to reconnect broken nerve bundles and provide protection to facilitate nerve regeneration. However, the low degradation rate and regeneration rate, as well as the requirement for secondary surgery are some of the most criticized drawbacks of existing nerve conduits. With high processing flexibility from the photo-curability, poly (glycerol sebacate) acrylate (PGSA) is a promising material with tunable mechanical properties and biocompatibility for the development of medical devices. Here, polyvinylpyrrolidone (PVP), silver nanoparticles (AgNPs), and graphene are embedded in biodegradable PGSA matrix. The polymer composites are then assessed for their electrical conductivity, biodegradability, three-dimensional-printability (3D-printability), and promotion of cell proliferation. Through the four-probe technique, it is shown that the PGSA composites are identified as highly conductive in swollen state. Furthermore, biodegradability is evaluated through enzymatic degradation and facilitated hydrolysis. Cell proliferation and guidance are significantly promoted by three-dimensional-printed microstructures and electrical stimulation on PGSA composites, especially on PGSA-PVP. Hence, microstructured nerve conduits are 3D-printed with PGSA-PVP. Guided cell growth and promoted proliferation are subsequently demonstrated by Schwann cell culture combined with electrical stimulation. Consequently, 3D-printed nerve conduits fabricated with PGSA composites hold great potential in nerve tissue regeneration through electrical stimulation.

Implantable nerve guidance conduits: Material combinations, multi-functional strategies and advanced engineering innovations

Nerve guidance conduits (NGCs) have attracted much attention due to their great necessity and applicability in clinical use for the peripheral nerve repair. Great efforts in recent years have been devoted to the development of high-performance NGCs using various materials and strategies. The present review provides a comprehensive overview of progress in the material innovation, structural design, advanced engineering technologies and multi functionalization of state-of-the-art nerve guidance conduits NGCs. Abundant advanced engineering technologies including extrusion-based system, laser-based system, and novel textile forming techniques in terms of weaving, knitting, braiding, and electrospinning techniques were also analyzed in detail. Findings arising from this review indicate that the structural mimetic NGCs combined with natural and synthetic materials using advanced manufacturing technologies can make full use of their complementary advantages, acquiring better biomechanical properties, chemical stability and biocompatibility. Finally, the existing challenges and future opportunities of NGCs were put forward aiming for further research and applications of NGCs.

Biomaterials for Neural Tissue Engineering

The therapy of neural nerve injuries that involve the disruption of axonal pathways or axonal tracts has taken a new dimension with the development of tissue engineering techniques. When peripheral nerve injury (PNI), spinal cord injury (SCI), traumatic brain injury (TBI), or neurodegenerative disease occur, the intricate architecture undergoes alterations leading to growth inhibition and loss of guidance through large distance. To improve the limitations of purely cell-based therapies, the neural tissue engineering philosophy has emerged. Efforts are being made to produce an ideal scaffold based on synthetic and natural polymers that match the exact biological and mechanical properties of the tissue. Furthermore, through combining several components (biomaterials, cells, molecules), axonal regrowth is facilitated to obtain a functional recovery of the neural nerve diseases. The main objective of this review is to investigate the recent approaches and applications of neural tissue engineering approaches.

The Evolving Neural Tissue Engineering Landscape of India

The healthcare sector in India is witnessing unprecedented advancement. Tissue engineering has become an integral part of healthcare and medicine, particularly where treatments involve functional restoration of any injured or deceased part of the body. Not falling behind much with the progressing medical and healthcare sector of India, tissue engineering is also gaining momentum in the country. Out of several arenas of tissue engineering, India has made its mark in orthopedic and bone regeneration, cosmetic and skin regeneration, and very importantly neural regeneration. There are several articles reviewing the progress and prospects of orthopedic and skin regeneration research in India. However, there is no systematic review on progress, prospects, and pitfalls associated with neural tissue engineering in Indian context. The existing ones mainly focus on the technical advancements in the field from a global perspective. Therefore, it is worthwhile to have an organized look at the evolving neural tissue engineering landscape of India. This review will walk the readers systematically through different aspects of the topic. The review starts with an introduction to the nervous system to help readers appreciate the complexity that must be dealt with while engineering neural tissue. This is followed with a global picture of the neural tissue engineering, prominent research groups working on neural tissue engineering in India, factors that have and are currently molding the prospects of this field, and concluding with an overall perspective on present and future of neural tissue engineering in India.

Peripheral Nerve Conduit: Materials and Structures

Peripheral nerve injuries (PNIs) are the most common injury types to affect the nervous system. Restoration of nerve function after PNI is a challenging medical issue. Extended gaps in transected peripheral nerves are only repaired using autologous nerve grafting. This technique, however, in which nerve tissue is harvested from a donor site and grafted onto a recipient site in the same body, has many limitations and disadvantages. Recent studies have revealed artificial nerve conduits as a promising alternative technique to substitute autologous nerves. This Review summarizes different types of artificial nerve grafts used to repair peripheral nerve injuries. These include synthetic and natural polymers with biological factors. Then, desirable properties of nerve guides are discussed based on their functionality and effectiveness. In the final part of this Review, fabrication methods and commercially available nerve guides are described.

Current and novel polymeric biomaterials for neural tissue engineering

The nervous system is a crucial component of the body and damages to this system, either by of injury or disease, can result in serious or potentially lethal consequences. Restoring the damaged nervous system is a great challenge due to the complex physiology system and limited regenerative capacity.Polymers, either synthetic or natural in origin, have been extensively evaluated as a solution for restoring functions in damaged neural tissues. Polymers offer a wide range of versatility, in particular regarding shape and mechanical characteristics, and their biocompatibility is unmatched by other biomaterials, such as metals and ceramics. Several studies have shown that polymers can be shaped into suitable support structures, including nerve conduits, scaffolds, and electrospun matrices, capable of improving the regeneration of damaged neural tissues. In general, natural polymers offer the advantage of better biocompatibility and bioactivity, while synthetic or non-natural polymers have better mechanical properties and structural stability. Often, combinations of the two allow for the development of polymeric conduits able to mimic the native physiological environment of healthy neural tissues and, consequently, regulate cell behaviour and support the regeneration of injured nervous tissues.Currently, most of neural tissue engineering applications are in pre-clinical study, in particular for use in the central nervous system, however collagen polymer conduits aimed at regeneration of peripheral nerves have already been successfully tested in clinical trials.This review highlights different types of natural and synthetic polymers used in neural tissue engineering and their advantages and disadvantages for neural regeneration.

Strategic Design and Fabrication of Nerve Guidance Conduits for Peripheral Nerve Regeneration

Nerve guidance conduits (NGCs) have been drawing considerable attention as an aid to promote regeneration of injured axons across damaged peripheral nerves. Ideally, NGCs should include physical and topographic axon guidance cues embedded as part of their composition. Over the past decades, much progress has been made in the development of NGCs that promote directional axonal regrowth so as to repair severed nerves. This paper briefly reviews the recent designs and fabrication techniques of NGCs for peripheral nerve regeneration. Studies associated with versatile design and preparation of NGCs fabricated with either conventional or rapid prototyping (RP) techniques have been examined and reviewed. The effect of topographic features of the filler material as well as porous structure of NGCs on axonal regeneration has also been examined from the previous studies. While such strategies as macroscale channels, lumen size, groove geometry, use of hydrogel/matrix, and unidirectional freeze-dried surface are seen to promote nerve regeneration, shortcomings such as axonal dispersion and wrong target reinnervation still remain unsolved. On this basis, future research directions are identified and discussed.

Recent advances on biomedical applications of scaffolds in wound healing and dermal tissue engineering

The tissue engineering field has developed in response to the shortcomings related to the replacement of the tissues lost to disease or trauma: donor tissue rejection, chronic inflammation and donor tissue shortages. The driving force behind the tissue engineering is to avoid the mentioned issues by creating the biological substitutes capable of replacing the damaged tissue. This is done by combining the scaffolds, cells and signals in order to create the living, physiological, three-dimensional tissues. A wide variety of skin substitutes are used in the treatment of full-thickness injuries. Substitutes made from skin can harbour the latent viruses, and artificial skin grafts can heal with the extensive scarring, failing to regenerate structures such as glands, nerves and hair follicles. New and practical skin scaffold materials remain to be developed. The current article describes the important information about wound healing scaffolds. The scaffold types which were used in these fields were classified according to the accepted guideline of the biological medicine. Moreover, the present article gave the brief overview on the fundamentals of the tissue engineering, biodegradable polymer properties and their application in skin wound healing. Also, the present review discusses the type of the tissue engineered skin substitutes and modern wound dressings which promote the wound healing.

Photofabricated Gelatin-Based Nerve Conduits: Nerve Tissue Regeneration Potentials

There is a strong demand for development of nerve guide conduit with prompt nerve regeneration potential for injury-induced nerve defect. Prior to study on nerve tissue engineering using Schwann cells or nerve stem cells, the effectiveness of photofabricated scaffolds based on photocurable gelatin was examined. This study describes the evaluation of in vivo nerve tissue regeneration potentials of three custom-designed and -fabricated prostheses (inner diameter, 1.2 mm; outer diameter, 2.4 mm; wall thickness, 0.60 mm; and length, 15 mm) made of photocured gelatin: a plain photocured gelatin tube (model I), a photocured gelatin tube packed with bioactive substances (laminin, fibronectin, and nerve growth factor) coimmobilized in a photocured gelatin rod (model II), and a photocured gelatin tube packed with bioactive substances coimmobilized in multifilament fibers (model III). These prostheses were implanted between the proximal and distal stumps 10 mm of the dissected right sciatic nerve of 70 adult male Lewis rats for up to 1 year. The highest regenerative potentials were found using the model III prosthesis, followed by the model II prosthesis. Markedly retarded neural regeneration was observed using the model I prosthesis. These were evaluated from the viewpoints of functional recovery, electrophysiological responses, and tissue morphological regeneration. The significance of the synergistic cooperative functions of multifilaments, which serve as a platform that provides contact guidance to direct longitudinal cell movement and tissue ingrowth and as a cell adhesive matrix with high surface area, and immobilized bioactive substances, which enhance nerve regeneration via biological stimulation, is discussed.

Recurrent laryngeal nerve regeneration using an oriented collagen scaffold containing Schwann cells

OBJECTIVES/HYPOTHESIS

Regeneration of the recurrent laryngeal nerve (RLN), which innervates the intrinsic laryngeal muscles such that they can perform complex functions, is particularly difficult to achieve. Synkinesis after RLN neogenesis leads to uncoordinated movement of laryngeal muscles. Recently, some basic research studies have used cultured Schwann cells (SCs) to repair peripheral nerve injuries. This study aimed to regenerate the RLN using an oriented collagen scaffold containing cultured SCs.

STUDY DESIGN

Preliminary animal experiment.

METHODS

A 10-mm-long autologous canine cervical ansa was harvested. The nerve tissue was scattered and subcultured on oriented collagen sheets in reduced serum medium. After verifying that the smaller cultivated cells with high nucleus-cytoplasm ratios were SCs, collagen sheets with longitudinally oriented cells were rolled and inserted into a 20-mm collagen conduit. The fabricated scaffolds containing SCs were autotransplanted to a 20-mm deficient RLN, and vocal fold movements and histological characteristics were observed.

RESULTS

Scaffolds containing cultured SCs were successfully fabricated. Immunocytochemical examination revealed that these isolated and cultured cells, identified as SCs, expressed S-100 protein and GFAP but not vimentin. The orientation of SCs matched that of the oriented collagen sheet. Two months after successful transplantation, laryngeal endoscopy revealed coordinated movement of the bilateral vocal folds by external stimulation under light general anesthesia. Hematoxylin and eosin staining showed that the regenerated RLN lacked epineurium surrounding the nerve fibers and was interspersed with collagen fibers. Myelin protein zero was expressed around many axons.

CONCLUSIONS

Partial regeneration of RLN was achieved through the use of oriented collagen scaffolding.

LEVEL OF EVIDENCE

NA Laryngoscope, 127:1622-1627, 2017.

Distal Inside-Out Epineural Sliding Technique to Repair Segmental Nerve Defects

Background: The repair of a segmental peripheral nerve injury is a clinical challenge. Several studies have been performed to determine superior methods for overcoming nerve gaps. The purpose of this study was to investigate if the inside-out slided epineurium of the distal segment of an injured nerve can serve as a conduit to bridge a short nerve defect (10 mm). Methods: Nineteen sciatic nerves in Sprague-Dawley rats were transected, and a 10-mm gap was left between the ends. A section of distal epineurium was pulled inside out to bridge the gap. Walking track analysis was performed, and the sciatic function index (SFI) was calculated. Wet muscle mass and withdrawal reflex were measured. The density of axon fibers at different levels of repaired nerves was determined, and histological analysis was performed at 16 weeks. Results: The mean SFI improved from -81.0 at 4 weeks to 36.3 at 16 weeks. The axon densities showed regeneration through the epineural tube, and 5 of the rats demonstrated a withdrawal reflex. The weight of the tibialis anterior muscle of the injured limb at 16 weeks was 59% that of the uninjured side. Conclusions: The distal epineural sheath tube provided a size-matched conduit between the nerve stumps, with no histological donor-site morbidity. Histologically, regeneration occurred through the epineural tube without neuroma formation, and functional recovery was comparable to that of previous studies of nerve repair techniques. Technique may be an addition to the armamentarium of tools used to treat segmental nerve defects.

Peripheral Facial Nerve Regeneration Using Collagen Conduit Entubulation in a Cat Model

Objectives:

Facial nerve (FN) injuries are functionally, psychologically, and financially debilitating. Facial nerve autograft repairs produce significant donor nerve morbidity and functional results that rarely exceed House-Brackmann (HB) grade III over VI. In this study we sought to enhance FN regeneration via collagen conduit entubulation.

Methods:

Five control cats underwent right (“cut-side”) FN transection and immediate microsurgical anastomosis repair. Five experimental cats underwent identical repairs plus collagen conduit entubulation of each anastomosis.

Results:

Postoperative behavioral observations revealed gradual FN functional recovery in all cats, who attained adapted HB grades of II to III over VI after 6 weeks. Electromyographic latencies and amplitudes from the bilateral orbicularis oculi and orbicularis oris muscles indicated restoration of FN continuity in all 10 cats. In comparison with FN repairs without conduits, repairs with conduits significantly enhanced recovery of amplitude in cut-side orbicularis oculi muscles (p = .037) and latency in cut-side orbicularis oris muscles (p = .048). In comparison with intact left (“uncut-side”) FN latencies and amplitudes, more statistically significant differences in cut-side FN function were observed in repairs without conduits than in repairs with conduits. Conduits therefore facilitated a more complete return of electrophysiological function. Histologic analyses confirmed FN continuity and revealed more organized FN regenerative architecture in conduit-implanted repairs.

Conclusions:

The overall results support enhanced FN regeneration with collagen conduit entubulation.

Textile cell-free scaffolds for in situ tissue engineering applications

In this article, the benefits offered by micro-fibrous scaffold architectures fabricated by textile manufacturing techniques are discussed: How can established and novel fiber-processing techniques be exploited in order to generate templates matching the demands of the target cell niche? The problems related to the development of biomaterial fibers (especially from nature-derived materials) ready for textile manufacturing are addressed. Attention is also paid on how biological cues may be incorporated into micro-fibrous scaffold architectures by hybrid manufacturing approaches (e.g. nanofiber or hydrogel functionalization). After a critical review of exemplary recent research works on cell-free fiber based scaffolds for in situ TE, including clinical studies, we conclude that in order to make use of the whole range of favors which may be provided by engineered fibrous scaffold systems, there are four main issues which need to be addressed: (1) Logical combination of manufacturing techniques and materials. (2) Biomaterial fiber development. (3) Adaption of textile manufacturing techniques to the demands of scaffolds for regenerative medicine. (4) Incorporation of biological cues (e.g. stem cell homing factors).

Design of barrier coatings on kink-resistant peripheral nerve conduits

Here, we report on the design of braided peripheral nerve conduits with barrier coatings. Braiding of extruded polymer fibers generates nerve conduits with excellent mechanical properties, high flexibility, and significant kink-resistance. However, braiding also results in variable levels of porosity in the conduit wall, which can lead to the infiltration of fibrous tissue into the interior of the conduit. This problem can be controlled by the application of secondary barrier coatings. Using a critical size defect in a rat sciatic nerve model, the importance of controlling the porosity of the nerve conduit walls was explored. Braided conduits without barrier coatings allowed cellular infiltration that limited nerve recovery. Several types of secondary barrier coatings were tested in animal studies, including (1) electrospinning a layer of polymer fibers onto the surface of the conduit and (2) coating the conduit with a cross-linked hyaluronic acid-based hydrogel. Sixteen weeks after implantation, hyaluronic acid-coated conduits had higher axonal density, displayed higher muscle weight, and better electrophysiological signal recovery than uncoated conduits or conduits having an electrospun layer of polymer fibers. This study indicates that braiding is a promising method of fabrication to improve the mechanical properties of peripheral nerve conduits and demonstrates the need to control the porosity of the conduit wall to optimize functional nerve recovery.

Past, Present, and Future of Nerve Conduits in the Treatment of Peripheral Nerve Injury

With significant advances in the research and application of nerve conduits, they have been used to repair peripheral nerve injury for several decades. Nerve conduits range from biological tubes to synthetic tubes, and from nondegradable tubes to biodegradable tubes. Researchers have explored hollow tubes, tubes filled with scaffolds containing neurotrophic factors, and those seeded with Schwann cells or stem cells. The therapeutic effect of nerve conduits is improving with increasing choice of conduit material, new construction of conduits, and the inclusion of neurotrophic factors and support cells in the conduits. Improvements in functional outcomes are expected when these are optimized for use in clinical practice.

Organotypic brain slice cultures: A review

In vitro cell cultures are an important tool for obtaining insights into cellular processes in an isolated system and a supplement to in vivo animal experiments. While primary dissociated cultures permit a single homogeneous cell population to be studied, there is a clear need to explore the function of brain cells in a three-dimensional system where the main architecture of the cells is preserved. Thus, organotypic brain slice cultures have proven to be very useful in investigating cellular and molecular processes of the brain in vitro. This review summarizes (1) the historical development of organotypic brain slices focusing on the membrane technology, (2) methodological aspects regarding culturing procedures, age of donors or media, (3) whether the cholinergic neurons serve as a model of neurodegeneration in Alzheimer’s disease, (4) or the nigrostriatal dopaminergic neurons as a model of Parkinson’s disease and (5) how the vascular network can be studied, especially with regard to a synthetic blood–brain barrier. This review will also highlight some limits of the model and give an outlook on future applications.

Computer aided biomanufacturing of mechanically robust pure collagen meshes with controlled macroporosity

Reconciliation of high strength and high porosity in pure collagen based structures is a major barrier in collagen's use in load-bearing applications. The current study developed a CAD/CAM based electrocompaction method to manufacture highly porous patterned scaffolds using pure collagen. Utilization of computerized scaffold design and fabrication allows the integration of mesh-scaffolds with controlled pore size, shape and spacing. Mechanical properties of fabricated collagen meshes were investigated as a function of number of patterned layers, and with different pore geometries. The tensile stiffness, tensile strength and modulus ranges from 10-50 N cm(-1), 1-6 MPa and 5-40 MPa respectively for all the scaffold groups. These results are within the range of practical usability of different tissue engineering application such as tendon, hernia, stress urinary incontinence or thoracic wall reconstruction. Moreover, 3-fold increase in the layer number resulted in more than 5-fold increases in failure load, toughness and stiffness which suggests that by changing the number of layers and shape of the structure, mechanical properties can be modulated for the aforementioned tissue engineering application. These patterned scaffolds offer a porosity ranging from 0.8 to 1.5 mm in size, a range that is commensurate with pore sizes of repair meshes in the market. The connected macroporosity of the scaffolds facilitated cell-seeding such that cells populated the entire scaffold at the time of seeding. After 3 d of culture, cell nuclei became elongated. These results indicate that the patterned electrochemical deposition method in this study was able to develop mechanically robust, highly porous collagen scaffolds with controlled porosity which not only tries to solve one of the major tissue engineering problems at a fundamental level but also has a significant potential to be used in different tissue engineering applications.

Peripheral nerve conduits: technology update

Peripheral nerve injury is a worldwide clinical problem which could lead to loss of neuronal communication along sensory and motor nerves between the central nervous system (CNS) and the peripheral organs and impairs the quality of life of a patient. The primary requirement for the treatment of complete lesions is a tension-free, end-to-end repair. When end-to-end repair is not possible, peripheral nerve grafts or nerve conduits are used. The limited availability of autografts, and drawbacks of the allografts and xenografts like immunological reactions, forced the researchers to investigate and develop alternative approaches, mainly nerve conduits. In this review, recent information on the various types of conduit materials (made of biological and synthetic polymers) and designs (tubular, fibrous, and matrix type) are being presented.

The amnion muscle combined graft (AMCG) conduits: a new alternative in the repair of wide substance loss of peripheral nerves

The use of autologous sural nerve grafts is still the current gold standard for the repair of peripheral nerve injuries with wide substance losses, but with a poor rate of functional recovery after repair of mixed and motor nerves, a limited donor nerve supply, and morbidity of donor site. At present, tubulization through the muscle vein combined graft, is a viable alternative to the nerve autografts and certainly is a matter of tissue engineering still open to continuous development, although this technique is currently limited to a critical gap of 3 cm with less favorable results for motor function recovery. In this report, we present a completely new tubulization method, the amnion muscle combined graft (AMCG) technique, that consists in the combination of the human amniotic membrane hollow conduit with autologous skeletal muscle fragments for repairing the substance loss of peripheral nerves and recover both sensory and motor functions. In a series of five patients with loss of substance of the median nerve ranging 3-5 cm at the wrist, excellent results graded as S4 in two cases, S3+ in two cases, and S3 in one case; M4 in four cases and M3 in one case were achieved. No iatrogenic damage due to withdrawal of a healthy nerve from donor site was observed. This technique allows to repair extensive loss of substance up to 5 cm with a good sensory and motor recovery. The AMCG thus may be considered a reasonable alternative to traditional nerve autograft in selected clinical conditions.

Regeneration of the nerves in the aerial cavity with an artificial nerve conduit --reconstruction of chorda tympani nerve gaps-

OBJECTIVES/HYPOTHESIS

Due to its anatomical features, the chorda tympani nerve (CTN) is sometimes sacrificed during middle ear surgery, resulting in taste dysfunction. We examined the effect of placing an artificial nerve conduit, a polyglycolic acid (PGA)-collagen tube, across the gap in the section of the resected chorda tympani nerve (CTN) running through the tympanic cavity.

METHODS

The CTN was reconstructed with a PGA-collagen tube in three patients with taste disturbance who underwent CTN resection. To evaluate the effect of the reconstruction procedure on the patients' gustatory function, we measured the patients' electrogustometry (EGM) thresholds. The patients were followed-up for at least two years.

RESULTS

Gustatory function was completely restored in all of the patients after the reconstruction. The patients' EGM thresholds exhibited early improvements within one to two weeks and had returned to their normal ranges within three months. They subsequently remained stable throughout the two-year follow-up period. In a patient who underwent a second surgical procedure, it was found that the PGA-collagen tube used in the first surgical procedure had been absorbed and replaced by new CTN fibers with blood vessels on their surfaces.

CONCLUSION

These results suggest that reconstruction of the CTN with an artificial nerve conduit, a PGA-collagen tube, allows functional and morphological regeneration of the nerve and facilitates the recovery of taste function. PGA-collagen tubes might be useful for repairing CTNs that are resected during middle ear surgery. Further research is required to confirm these preliminary results although this is the first report to describe the successful regeneration of a nerve running through an aerial space.

Functional regeneration of recurrent laryngeal nerve injury during thyroid surgery using an asymmetrically porous nerve guide conduit in an animal model

BACKGROUND

Vocal cord paralysis (VCP) caused by recurrent laryngeal nerve (RLN) damage during thyroidectomy commonly results in serious medico-legal problems. The purpose of this study was to evaluate the usefulness of an asymmetrically porous polycaprolactone (PCL)/Pluronic F127 nerve guide conduit (NGC) for functional regeneration in a RLN injury animal model.

METHODS

A biodegradable, asymmetrically porous PCL/F127 NGC with selective permeability was fabricated for use in this study. A 10-mm segment of left RLN was resected in 28 New Zealand white rabbits, and then an asymmetrically porous NGC or a nonporous silicone tube was interposed between both stumps and securely fixed. Vocal cord mobility was endoscopically evaluated at one, four, and eight weeks postoperatively. Nerve growth through NGCs was assessed by toluidine blue staining, and thyroarytenoid (TA) muscle atrophy was evaluated by hematoxylin and eosin staining. Immunohistochemical stainings for acetylcholinesterase (AchE), anti-neurofilament (NF), and anti-S100 protein were also conducted, and transmission electron microscopy (TEM) was used to evaluate functional nerve regeneration.

RESULTS

At eight weeks postoperatively, endoscopic evaluations showed significantly better recovery from VCP in the asymmetrically porous PCL/F127 NGC group (6 of 10 rabbits) than in the silicone tube group (1 of 10 rabbits). Continued nerve growth on the damaged nerve endings was observed with time in the asymmetrically porous PCL/F127 NGC-interposed RLNs. TA muscle dimensions and AchE expressions in TA muscle were significantly greater in the asymmetrically porous PCL/F127 NGC group than in the silicone tube group. Furthermore, immunohistochemical staining revealed the expression of NF and S100 protein in the regenerated nerves in the asymmetrically porous PCL/F127 NGC group at eight weeks postoperatively, and at this time, TEM imaging showed myelinated axons in the regenerated RLNs.

CONCLUSION

The study shows that asymmetrically porous PCL/F127 NGC provides a favorable environment for RLN regeneration and that it has therapeutic potential for the regeneration of RLN damage.

Electrophysiologic evaluation of inferior alveolar nerve regenerated by bifocal distraction osteogenesis in dogs

BACKGROUND

Bifocal distraction osteogenesis has been shown to be a reliable method for reconstructing missing bone segments. However, there are no reports regarding inferior alveolar nerve regeneration during bifocal distraction. In the present study, the authors evaluated the function of inferior alveolar nerve regenerated by bifocal distraction after segmental resection in the mandibles of dogs.

METHODS

Using a bifocal distraction osteogenesis method, the authors produced a 10-mm mandibular defect and distracted the transport disk at a rate of 1 mm/day. The regenerated inferior alveolar nerve was evaluated by electrophysiologic analysis that was performed on all dogs after euthanasia at 3, 6, and 12 months after the first operation.

RESULTS

At 6 and 12 months, stable evoked potential measurements were obtained from the nerves throughout the study on electrophysiologic analyses.

CONCLUSIONS

The authors' results indicate that the inferior alveolar nerve regenerated by bifocal distraction osteogenesis functioned electrophysiologically at 6 months after the first operation. Although our research is still at the stage of animal experiments, future application in humans is considered to be possible.

Further development of reconstructive and cell tissue-engineering technology for treatment of complete peripheral nerve injury in rats

In this work we evaluated the efficacy of biodegradable composite co-polymer guiding neurotube, based on tissue-engineering technology, for the treatment of complete peripheral nerve injury where the nerve defect is significant. The right sciatic nerve of 12 three-month-old rats was completely transected and peripheral nerve segment was removed. A 2.2-cm biodegradable co-polymer neurotube containing viscous gel (NVR-N-Gel) with survival factors, neuroprotective agents and Schwann cells was placed between the proximal and the distal parts of the transected nerve for reconnection a 2-cm nerve defect. The proximal and distal parts of the nerve were fixed into the neurotube using 10-0 sutures. Ultrasound observation showed growth of the axons into the composite neurotube 2 months after the surgery. Electrophysiological study indicated compound muscle action potentials in nine out of 12 rats, 2-4 months after peripheral nerve reconstructive surgery. The postoperative follow-up (up to 4 months) on the operated rats that underwent peripheral nerve reconstruction using composite co-polymer neurotube, showed beginning of re-establishment of active foot movements. The tube was dissolved and nerve showed complete reconnection. Histological observation of the nerve showed growth of myelinated axons into the site where a 2-cm nerve defect replaced by composite co-polymer neurotube and into the distal part of the nerve.

IN CONCLUSION

(1) an innovative composite neurotube for reconstruction of significant loss of peripheral nerve segment is described; (2) a viscous gel, containing survival factors, neuroprotective agents and Schwann cells served as a regenerative environment for repair. Further investigations of this reconstructive procedure are being conducted.

A synthetic oxygen carrier in fibrin matrices promotes sciatic nerve regeneration in rats

Tissue-engineering nerve conduits have been studied for a long time in bridging large nerve defects. However, the low oxygen availability within the nerve conduits, which results in death of migratory Schwann cells (SC) or loss of the newly formed tissue's function, is still an obstacle for axonal regeneration. Thus, it was hypothesized that an oxygen-enriched conduit would enhance axonal regeneration and functional recovery in vivo. To address this issue, perfluorotributylamine (PFTBA) enriched fibrin hydrogel was prepared and injected into collagen-chitosan conduits. The conduit containing PFTBA-enriched fibrin hydrogel was then used to bridge a 12-mm sciatic nerve defect in rats. The control rats were bridged with collagen-chitosan conduits filled with fibrin matrices without PFTBA. It was found that axonal regeneration and functional recovery in the combined PFTBA group were significantly higher than those in the control group without PFTBA. Further investigations showed that the mRNA and protein levels of S-100, brain-derived neurotrophic factor and nerve growth factor were enhanced by PFTBA at 1 and 3weeks after surgery. However, the mRNA and protein levels of vascular endothelial growth factor were in a similar range between the combined PFTBA group and the control group without PFTBA. In addition, immunohistochemical results showed that the morphological appearances of regenerated nerve and survival of SC were enhanced by PFTBA at 4 and 12weeks after surgery. In conclusion, PFTBA-enriched nerve conduit is capable of enhancing axonal regeneration, which provides a new avenue for achieving better functional recovery in the treatment of nerve defect.

Advances in experimental and clinical studies of chemotaxis

The theory of chemotaxis has been widely accepted, but its mechanisms are disputed. Chemotactic growth of peripheral nerves may be tissue, topographic and end-organ specific. Recent studies indicated that peripheral nerve regeneration lacks topographic specificity, but whether it has end-organ specificity is disputed. Chemotaxis in nerve regeneration is affected by the distance between stumps, volume, and neurotrophic support, as well as the structure of distal nerve stumps. It can be applied to achieve precise repair of nerves and complete recovery of end organ function. Small gap sleeve bridging technique, which is based on this theory shows promising effects but it is still challenging to find the perfect combination of nerve conduits, cells and neurotrophic factors to put it intoits best use. In this paper, we made a comprehensive review of mechanisms, effect factors and applications of chemotaxis.

Effect of surface pore structure of nerve guide conduit on peripheral nerve regeneration

Polycaprolactone (PCL)/Pluronic F127 nerve guide conduits (NGCs) with different surface pore structures (nano-porous inner surface vs. micro-porous inner surface) but similar physical and chemical properties were fabricated by rolling the opposite side of asymmetrically porous PCL/F127 membranes. The effect of the pore structure on peripheral nerve regeneration through the NGCs was investigated using a sciatic nerve defect model of rats. The nerve fibers and tissues were shown to have regenerated along the longitudinal direction through the NGC with a nano-porous inner surface (Nanopore NGC), while they grew toward the porous wall of the NGC with a micro-porous inner surface (Micropore NGC) and, thus, their growth was restricted when compared with the Nanopore NGC, as investigated by immunohistochemical evaluations (by fluorescence microscopy with anti-neurofilament staining and Hoechst staining for growth pattern of nerve fibers), histological evaluations (by light microscopy with Meyer's modified trichrome staining and Toluidine blue staining and transmission electron microscopy for the regeneration of axon and myelin sheath), and FluoroGold retrograde tracing (for reconnection between proximal and distal stumps). The effect of nerve growth factor (NGF) immobilized on the pore surfaces of the NGCs on nerve regeneration was not so significant when compared with NGCs not containing immobilized NGF. The NGC system with different surface pore structures but the same chemical/physical properties seems to be a good tool that is used for elucidating the surface pore effect of NGCs on nerve regeneration.

Rat peripheral nerve regeneration using nerve guidance channel by porcine small intestinal submucosa

Objective

In order to develop a novel nerve guidance channel using porcine small intestinal submucosa (SIS) for nerve regeneration, we investigated the possibility of SIS, a tissue consisting of acellular collagen material without cellular immunogenicity, and containing many kinds of growth factors, as a natural material with a new bioactive functionality.

Methods

Left sciatic nerves were cut 5 mm in length, in 14 Sprague-Dawley rats. Grafts between the cut nerve ends were performed with a silicone tube (Silicon group, n=7) and rolled porcine SIS (SIS group, n=7). All rats underwent a motor function test and an electromyography (EMG) study on 4 and 10 weeks after grafting. After last EMG studies, the grafts, including proximal and distal nerve segments, were retrieved for histological analysis.

Results

Foot ulcers, due to hypesthesia, were fewer in SIS group than in Silicon group. The run time tests for motor function study were 2.67 seconds in Silicon group and 5.92 seconds in SIS group. Rats in SIS group showed a better EMG response for distal motor latency and amplitude than in Silicon group. Histologically, all grafts contained some axons and myelination. However, the number of axons and the degree of myelination were significantly higher in SIS group than Silicon group.

Conclusion

These results show that the porcine SIS was an excellent option as a natural biomaterial for peripheral nerve regeneration since this material contains many kinds of nerve growth factors. Furthermore, it could be used as a biocompatible barrier covering neural tissue.

Precision microchannel scaffolds for central and peripheral nervous system repair

In previous studies, we demonstrated the ability to linearly guide axonal regeneration using scaffolds comprised of precision microchannels 2 mm in length. In this work, we report our efforts to augment the manufacturing process to achieve clinically relevant scaffold dimensions in the centimeter-scale range. By selective etching of multi-component fiber bundles, agarose hydrogel scaffolds with highly ordered, close-packed arrays of microchannels, ranging from 172 to 320 μm, were fabricated with overall dimensions approaching clinically relevant length scales. Cross-sectional analyses determined that the maximum microchannel volume per unit volume of scaffold approached 80%, which is nearly twice that compared to our previously reported study. Statistical analyses at various points along the length of the microchannels also show a significant degree of linearity along the entire length of the scaffold. Two types of multi-component fiber bundle templates were evaluated; polystyrene and poly(methyl methacrylate). The scaffolds consisting of 2 cm long microchannels were fabricated with the poly(methyl methacrylate) fiber-cores exhibited a higher degree of linearity compared to those fabricated using polystyrene fibers. It is believed that the materials process developed in this study is useful for fabricating high aspect ratio microchannels in biocompatible materials with a wide range of geometries for guiding nerve regeneration.

Regeneration of completely transected spinal cord using scaffold of poly(D,L-lactide-co-glycolide)/small intestinal submucosa seeded with rat bone marrow stem cells

Using a complete spinal cord transection model, the present study employed a combinatorial strategy comprising rat bone marrow stem cells (rBMSCs) and polymer scaffolds to regenerate neurological function after spinal cord injury (SCI) of different lengths. SCI models with completely transected lesions were prepared by surgical removal of 1 mm (SC1) or 3 mm (SC3) lengths of spinal cord in the eighth-to-ninth spinal vertebrae, a procedure that resulted in bilateral hindlimb paralysis. A cylindrical poly(D,L-lactide-co-glycolide)/small intestinal submucosa scaffold 1 or 3 mm in length with or without rBMSCs was fitted into the completely transected lesion. Rats in SC1 and SC3 groups implanted with rBMSC-containing scaffolds received Basso-Beattie-Bresnahan scores for hindlimb locomotion of 15 and 8, respectively, compared with ∼3 for control rats in SC1-C and SC3-C groups implanted with scaffolds lacking rBMSCs. The amplitude of motor-evoked potentials recorded in the hindlimb area of the sensorimotor cortex after stimulation of the injured spinal cord averaged ∼100 μV in SC1-C and 10-50 μV in SC3-C groups at 4 weeks, and then declined to nearly zero at 8 weeks. In contrast, the amplitude of motor-evoked potentials increased from ∼300 to 350 μV between 4 and 8 weeks in SC1 rats and from ∼200 to ∼250 μV in SC3 rats. These results demonstrate functional recovery in rBMSC-transplanted rats, especially those with smaller defects. Immunohistochemically stained sections of the injury site showed clear evidence for axonal regeneration only in rBMSC-transplanted SC1 and SC3 models. In addition, rBMSCs were detected at the implanted site 4 and 8 weeks after transplantation, indicating cell survival in SCI. Collectively, our results indicate that therapeutic rBMSCs in a poly(D,L-lactide-co-glycolide)/small intestinal submucosa scaffold induced nerve regeneration in a complete spinal cord transection model and showed that functional recovery further depended on defect length.

Engineering bi-layer nanofibrous conduits for peripheral nerve regeneration

Trauma injuries often cause peripheral nerve damage and disability. A goal in neural tissue engineering is to develop synthetic nerve conduits for peripheral nerve regeneration having therapeutic efficacy comparable to that of autografts. Nanofibrous conduits with aligned nanofibers have been shown to promote nerve regeneration, but current fabrication methods rely on rolling a fibrous sheet into the shape of a conduit, which results in a graft with inconsistent size and a discontinuous joint or seam. In addition, the long-term effects of nanofibrous nerve conduits, in comparison with autografts, are still unknown. Here we developed a novel one-step electrospinning process and, for the first time, fabricated a seamless bi-layer nanofibrous nerve conduit: the luminal layer having longitudinally aligned nanofibers to promote nerve regeneration, and the outer layer having randomly organized nanofibers for mechanical support. Long-term in vivo studies demonstrated that bi-layer aligned nanofibrous nerve conduits were superior to random nanofibrous conduits and had comparable therapeutic effects to autografts for nerve regeneration. In summary, we showed that the engineered nanostructure had a significant impact on neural tissue regeneration in situ. The results from this study will also lead to the scalable fabrication of engineered nanofibrous nerve conduits with designed nanostructure. This technology platform can be combined with drug delivery and cell therapies for tissue engineering.

Composition-property relationships for an experimental composite nerve guidance conduit: evaluating cytotoxicity and initial tensile strength

The objective of this work was to examine the main (individual), combined (interaction) and second-order (quadratic) effects of: (i) poly(D,L-lactide-co-glycolide) (PLGA), (ii) F127, and (iii) a zinc-silicate based bioactive glass, on the cytotoxicity and ultimate tensile strength of an experimental nerve guidance conduit (NGC). The experimental plan was carried out according to a Box-Behnken design matrix. The effects of each compositional factor were quantified using response surface methodology (RSM) techniques. Linear and quadratic polynomial equations were developed to examine cytotoxicity (after incubation at 3, 7 and 28 days) and initial ultimate tensile strength (UTS(0)). Multiple regression analyses showed that the developed models yielded a good prediction for each response examined. It was observed that the beneficial effects of PLGA and bioactive glass on controlling cytotoxicity appeared greater than that of F127. Furthermore, the experimental conduits (with the exception of CNGC-I and CNGC-K) generally showed superior cytocompatibility when compared with the comparable literature for the clinically used nerve guidance conduit Neurolac(®). In this investigation, optimal compositions for cell viability were obtained for the following composition: PLGA = 18.89 wt%/F127 = 0.52 wt%/glass = 12.71 wt%. The optimization of composition with respect to ultimate tensile strength was also established (desired UTS(0) being based on the properties of the control device Neurolac(®) whose UTS is c.20 MPa). The desired UTS(0) of ≤ 20 MPa was found for the composition: PLGA = 18.63 wt%/F127 = 0.77 wt%/glass = 5.54 wt%. A UTS(0) ≤ 30 MPa was recorded for the composition: PLGA = 18.34 wt%/F127 = 0.62 wt%/glass = 9.83 wt%, such tensile strengths are comparable to, reported values for Neurolac(®). Examination of the composition-property relationships with respect to combining cell viability and UTS(0) indicated preferred compositions in the range 17.97-19.90 wt% PLGA, 0.16-1.13 wt% F127 and between 5.54 and ≤ 20 wt% glass. This research demonstrates the value of a design of experiments approach for the design of novel nerve guidance conduits, and shows that the materials examined may have potential for the repair of peripheral nerve discontinuities.

Regeneration and repair of peripheral nerves with different biomaterials: review

Peripheral nerve injury may cause gaps between the nerve stumps. Axonal proliferation in nerve conduits is limited to 10-15 mm. Most of the supportive research has been done on rat or mouse models which are different from humans. Herein we review autografts and biomaterials which are commonly used for nerve gap repair and their respective outcomes. Nerve autografting has been the first choice for repairing peripheral nerve gaps. However, it has been demonstrated experimentally that tissue engineered tubes can also permit lead to effective nerve repair over gaps longer than 4 cm repair that was previously thought to be restorable by means of nerve graft only. All of the discoveries in the nerve armamentarium are making their way into the clinic, where they are, showing great potential for improving both the extent and rate of functional recovery compared with alternative nerve guides.

Types of neural guides and using nanotechnology for peripheral nerve reconstruction

Peripheral nerve injuries can lead to lifetime loss of function and permanent disfigurement. Different methods, such as conventional allograft procedures and use of biologic tubes present problems when used for damaged peripheral nerve reconstruction. Designed scaffolds comprised of natural and synthetic materials are now widely used in the reconstruction of damaged tissues. Utilization of absorbable and nonabsorbable synthetic and natural polymers with unique characteristics can be an appropriate solution to repair damaged nerve tissues. Polymeric nanofibrous scaffolds with properties similar to neural structures can be more effective in the reconstruction process. Better cell adhesion and migration, more guiding of axons, and structural features, such as porosity, provide a clearer role for nanofibers in the restoration of neural tissues. In this paper, basic concepts of peripheral nerve injury, types of artificial and natural guides, and methods to improve the performance of tubes, such as orientation, nanotechnology applications for nerve reconstruction, fibers and nanofibers, electrospinning methods, and their application in peripheral nerve reconstruction are reviewed.

Novel degradable co-polymers of polypyrrole support cell proliferation and enhance neurite out-growth with electrical stimulation

Synthetic polymers such as polypyrrole (PPy) are gaining significance in neural studies because of their conductive properties. We evaluated two novel biodegradable block co-polymers of PPy with poly(epsilon-caprolactone) (PCL) and poly(ethyl cyanoacrylate) (PECA) for nerve regeneration applications. PPy-PCL and PPy-PECA co-polymers can be processed from solvent-based colloidal dispersions and have essentially the same or greater conductivity (32 S/cm for PPy-PCL, 19 S/cm for PPy-PECA) compared to the PPy homo-polymer (22 S/cm). The PPy portions of the co-polymers permit electrical stimulation whereas the PCL or PECA blocks enable degradation by hydrolysis. For in vitro tests, films were prepared on polycarbonate sheets by air brushing layers of dispersions and pressing the films. We characterized the films for hydrolytic degradation, electrical conductivity, cell proliferation and neurite extension. The co-polymers were sufficient to carry out electrical stimulation of cells without the requirement of a metallic conductor underneath the co-polymer film. In vitro electrical stimulation of PPy-PCL significantly increased the number of PC12 cells bearing neurites compared to unstimulated PPy-PCL. For in vivo experiments, the PPy co-polymers were coated onto the inner walls of nerve guidance channels (NGCs) made of the commercially available non-conducting biodegradable polymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB-HV). The NGCs were implanted in a 10 mm defect made in the sciatic nerve of rats, and harvested after 8 weeks. Histological staining showed axonal growth. The studies indicated that these new conducting degradable biomaterials have good biocompatibility and support proliferation and growth of PC12 cells in vitro (with and without electrical stimulation) and neurons in vivo (without electrical stimulation).

Recovery process of sciatic nerve defect with novel bioabsorbable collagen tubes packed with collagen filaments in dogs

Autologous nerve graft is the most commonly applied treatment for the patients with peripheral nerve defect, while application is limited because of tissue availability and unfavorable donor site morbidity. To overcome this problem, peripheral nerve regeneration using a nerve conduit has been studied. Especially, nerve conduit using biodegradable materials has been considered promising. In this study, a potential of collagen nerve conduit has been studied with special reference to the regenerating process of a peripheral nerve. Twelve adult female Beagle dogs weighting 10-12 kg were used. The peroneal nerve was cut to make a 30-mm defect. The nerve defect was bridged by the collagen artificial nerve conduit. Comprehensive functional, electrophysiological, morphometrical, and histological analyses were performed until one year after operation. The wet weight of tibialis anterior muscles was only 32.4% of the healthy side at 24 weeks, which was recovered to 77.4% at 52 weeks after denervation. Electrophysiological evaluation of tibialis anterior muscle belly showed polyphasic wave at 52 weeks after implantation, which was almost half amplitude as compared with that of control. The diameters of myelinated nerve fibers thickened day by day, and the average diameter was 5.16 microm at PFN, 3.91 microm at CG, and 3.75 microm at DFN, and average thickness of myelin sheath was 0.94 microm at PFN, 0.46 microm at CG, and 0.55 microm at DFN after 52 weeks. The distribution of myelinated nerve fiber size in the 52 weeks group was distinctly bimodal with the major peak at approximately 2-4 microm and the minor peak at 10-12 microm. These findings were consistent with the distribution of the normal nerve fiber. This study proves the feasibility of the collagen artificial nerve conduit for promoting nerve regeneration, raises new possibilities of seeking alternatives to autograft for nerve repair. The results from this study showed detailed process of morphological, electrophysiological, and functional recovery of the regenerated nerve, which would provide scientific background for this novel therapy.

Delivery of adipose-derived precursor cells for peripheral nerve repair

To test the hypothesis that the transplantation of adipose precursor cells (APCs) improves nerve regeneration and functional recovery, human APCs were transplanted into the lumen of a nerve guide in a 6-mm unilateral sciatic nerve defect in athymic rats. The three control groups for the study were biodegradable, polycaprolactone-based nerve conduit without APCs, autograft, and empty defect. Behavioral tests were performed every 3 weeks, and the sciatic functional index (SFI) was calculated based on measurements from the hindlimb prints. After 12 weeks, the nerve as well as right and left gastrocnemius muscles were removed and preserved for histological evaluation. Full regeneration of the sciatic nerve occurred on the rats that received the autograft, the guide, and the guide with APCs; no regeneration was observed on any of the rats in which the defect was left untreated (empty defect). APCs survived transplantation for up to 12 weeks in the injured peripheral nerve. No significant colocalization was observed between the immunostaining for glial fibrillary protein and anti-human lamin A/C, implying that the APCs did not differentiate into Schwann cells at the site of injury. In comparison with the rats with untreated defects, a decrease in muscle atrophy was observed on those rats that received the autograft and the guide with cells as indicated by the gastrocnemius muscle weight ratio and the muscle fiber ratio. Significant differences in SFI were observed 3 weeks postinjury between the rats in which the guide was left empty and those that received the guide with APCs; however, these differences were not observed at 12 weeks. The transplantation of APCs promoted the formation of a more robust nerve as evidenced by the results from the cross-sectional area of regenerated nerve, and the transplantation of APCs produced a decrease in muscle atrophy.

Trophic activity derived from bone marrow mononuclear cells increases peripheral nerve regeneration by acting on both neuronal and glial cell populations

A rat model of complete sciatic nerve transection was used to evaluate the effect of bone marrow mononuclear cells (BMMC) transplanted to the injury site immediately after lesion. Rats treated with BMMC had both sensory and motor axons reaching the distal stump earlier compared to untreated animals. In addition, BMMC transplantation reduced cell death in dorsal root ganglia (DRG) compared to control animals. Transplanted BMMC remained in the lesion site for several days but there is no evidence of BMMC differentiation into Schwann cells. However, an increase in the number of Schwann cells, satellite cells and astrocytes was observed in the treated group. Moreover, neutralizing antibodies for nerve growth factor (NGF) (but not for brain-derived neurotrophic factor and ciliary-derived neurotrophic factor) added to the BMMC-conditioned medium reduced neurite growth of sensory and sympathetic neurons in vitro, suggesting that BMMC release NGF, improve regeneration of the sciatic nerve in the adult rat and stimulate Schwann and satellite cell proliferation or a combination of both.

Nerve repair: experimental and clinical evaluation of biodegradable artificial nerve guides

Several methods have been used for bridging nerve gaps. Much of the focus in nerve repair of peripheral nerves has focussed on creating either natural or synthetic tubular nerve guidance channels, as an alternative to nerve autografts. These conduits act to guide axons sprouting from the regenerating nerve end, provide a conduit for diffusion of neurotrophic and neurotropic factors secreted by the injured nerve stump, as well as help protect against infiltration of fibrous tissue. Among the conduits that have been studied are autogenous veins, arteries, mesothelial chambers, synthetic tubes, collagen tubes, amnion tubes, cardiac and skeletal muscle, and silicon tubes. This paper briefly reviews major studies in which bioabsorbable nerve guides were used for peripheral nerve repair, with a particular emphasis on polymeric guidance channels, in an effort to evaluate their use, their ability to support or enhance nerve regeneration and any potential problems.

Regeneration of peripheral motor nerve gaps with a polyglycolic acid-collagen tube: technical case report

OBJECTIVE

After previous success in regenerating canine peripheral nerves over 80 mm gaps using a bioabsorbable nerve guide tube, we have extended this method to the treatment of patients experiencing various types of nerve injury. This report describes the treatment of two cases of motor nerve disorder.

METHODS

The bioabsorbable nerve tube was a cylindrically woven polyglycolic acid (PGA) tube filled with collagen. A peripheral motor nerve defect (the frontalis branch of the facial nerve) was reconstructed using this PGA-collagen tube in two patients who experienced posttraumatic unilateral eyebrow ptosis for 3 months.

RESULTS

Five months after surgery, both patients regained their ability to voluntarily lift their eyebrows symmetrically. Electrophysiological examination at 5 months revealed recovery of compound muscle action potential and disappearance of distal latency on the affected side.

CONCLUSION

This is the first clinical report of motor nerve recovery achieved using the PGA-collagen nerve guide tube. The results suggest that use of a PGA-collagen tube is a promising option for the repair of motor nerve defects.