Synthesis and characterisation of dextran and pullulan sulphate

Extraction and Purification of Biopolymers from Marine Origin Sources Envisaging Their Use for Biotechnological Applications

Biopolymers are a versatile and diverse class of materials that has won high interest due to their potential application in several sectors of the economy, such as cosmetics, medical materials/devices, and food additives. In the last years, the search for these compounds has explored a wider range of marine organisms that have proven to be a great alternative to mammal sources for these applications and benefit from their biological properties, such as low antigenicity, biocompatibility, and biodegradability, among others. Furthermore, to ensure the sustainable exploitation of natural marine resources and address the challenges of 3R's policies, there is a current necessity to valorize the residues and by-products obtained from food processing to benefit both economic and environmental interests. Many extraction methodologies have received significant attention for the obtention of diverse polysaccharides, proteins, and glycosaminoglycans to accomplish the increasing demands for these products. The present review gives emphasis to the ones that can be obtained from marine biological resources, as agar/agarose, alginate and sulfated polysaccharides from seaweeds, chitin/chitosan from crustaceans from crustaceans, collagen, and some glycosaminoglycans such as chondroitin sulfate and hyaluronic acids from fish. It is offered, in a summarized and easy-to-interpret arrangement, the most well-established extraction and purification methodologies used for obtaining the referred marine biopolymers, their chemical structure, as well as the characterization tools that are required to validate the extracted material and respective features. As supplementary material, a practical guide with the step-by-step isolation protocol, together with the various materials, reagents, and equipment, needed for each extraction is also delivered is also delivered. Finally, some remarks are made on the needs still observed, despite all the past efforts, to improve the current extraction and purification procedures to achieve more efficient and green methodologies with higher yields, less time-consuming, and decreased batch-to-batch variability.

Sulfation of Wheat Straw Soda Lignin with Sulfamic Acid over Solid Catalysts

Soda lignin is a by-product of the soda process for producing cellulose from grassy raw materials. Since a method for the industrial processing of lignin of this type is still lacking, several research teams have been working on solving this problem. We first propose a modification of soda lignin with sulfamic acid over solid catalysts. As solid catalysts for lignin sulfation, modified carbon catalysts (with acid sites) and titanium and aluminum oxides have been used. In the elemental analysis, it is shown that the maximum sulfur content (16.5 wt%) was obtained with the Sibunit-4® catalyst oxidized at 400 °C. The incorporation of a sulfate group has been proven by the elemental analysis and Fourier-transform infrared spectroscopy. The molecular weight distribution has been examined by gel permeation chromatography. It has been demonstrated that the solid catalysts used in the sulfation process causes hydrolysis reactions and reduces the molecular weight and polydispersity index. It has been established by the thermal analysis that sulfated lignin is thermally stabile at temperatures of up to 200 °C. According to the atomic force microscopy data, the surface of the investigated film consists of particles with an average size of 50 nm. The characteristics of the initial and sulfated β-O-4 lignin model compounds have been calculated and recorded using the density functional theory.

Sulfation of Wheat Straw Soda Lignin with Sulfamic Acid over Solid Catalysts

Soda lignin is a by-product of the soda process for producing cellulose from grassy raw materials. Since a method for the industrial processing of lignin of this type is still lacking, several research teams have been working on solving this problem. We first propose a modification of soda lignin with sulfamic acid over solid catalysts. As solid catalysts for lignin sulfation, modified carbon catalysts (with acid sites) and titanium and aluminum oxides have been used. In the elemental analysis, it is shown that the maximum sulfur content (16.5 wt%) was obtained with the Sibunit-4^® catalyst oxidized at 400 °C. The incorporation of a sulfate group has been proven by the elemental analysis and Fourier-transform infrared spectroscopy. The molecular weight distribution has been examined by gel permeation chromatography. It has been demonstrated that the solid catalysts used in the sulfation process causes hydrolysis reactions and reduces the molecular weight and polydispersity index. It has been established by the thermal analysis that sulfated lignin is thermally stabile at temperatures of up to 200 °C. According to the atomic force microscopy data, the surface of the investigated film consists of particles with an average size of 50 nm. The characteristics of the initial and sulfated β-O-4 lignin model compounds have been calculated and recorded using the density functional theory.

Natural polysaccharides based self-assembled nanoparticles for biomedical applications - A review

In recent years, nanoparticles (NPs) derived from the self-assembly of natural polysaccharides have shown great potential in the biomedical field. Here, we described several self-assembly modes of natural polysaccharides in detail, summarized the natural polysaccharides mostly used for self-assembly, and provided insights into the current applications and achievements of these self-assembled NPs. As one of the most widespread substances in nature, most natural polysaccharides exhibit advantages of biodegradability, low immunogenicity, low toxicity, and degradable properties. Therefore, they have been fully explored, and the application of chitosan, hyaluronic acid, alginate, starch, and their derivatives has been extensively studied, especially in the fields of biomedical. Polysaccharides based NPs were proved to improve the solubility of insoluble drugs, enhance tissue target ability and realize the controlled and sustained release of drugs. When modified by hydrophobic groups, the amphiphilic polysaccharides can self-assemble into NPs. Other driven forces of self-assembly include electrostatic interaction and hydrogen bonds. Up to the present, polysaccharides-based nanoparticles have been widely applied for tumor treatment, antibacterial application, gene therapy, photodynamic therapy and transporting insulin.

Sulfation of Diethylaminoethyl-Cellulose: QTAIM Topological Analysis and Experimental and DFT Studies of the Properties

Sulfated cellulose derivatives are biologically active substances with anticoagulant properties. In this study, a new sulfated diethylaminoethyl (DEAE)-cellulose derivative has been obtained. The effect of a solvent on the sulfation process has been investigated. It is shown that 1,4-dioxane is the most effective solvent, which ensures the highest sulfur content in DEAE-cellulose sulfate under sulfamic acid sulfation. The processes of sulfamic acid sulfation in the presence of urea in 1,4-dioxane and in a deep eutectic solvent representing a mixture of sulfamic acid and urea have been compared. It is demonstrated that the use of 1,4-dioxane yields the sulfated product with a higher sulfur content. The obtained sulfated DEAE-cellulose derivatives have been analyzed by Fourier transform infrared spectroscopy, X-ray diffractometry, and scanning electron and atomic force microscopy, and the degree of their polymerization has been determined. The introduction of a sulfate group has been confirmed by the Fourier transform infrared spectroscopy data; the absorption bands corresponding to sulfate groups have been observed in the ranges of 1247-1256 and 809-816 cm-1. It is shown that the use of a deep eutectic solvent leads to the side carbamation reactions. Amorphization of DEAE-cellulose during sulfation has been demonstrated using X-ray diffractometry. The geometric structure of a molecule in the ground state has been calculated using the density functional theory with the B3LYP/6-31G(d, p) basis set. The reactive areas of DEAE-cellulose and its sulfated derivatives have been analyzed using molecular electrostatic potential maps. The thermodynamic parameters (heat capacity, entropy, and enthalpy) of the target sulfation products have been determined. The HOMO-LUMO energy gap, Mulliken atomic charges, and electron density topology of the title compound have been calculated within the atoms in molecule theory.

Sulfated extract of Abelmoschus esculentus: A potential cancer chemopreventive agent

BACKGROUND

Abelmoschus esculentus (AE) (okra), is an edible plant used in many food applications.

OBJECTIVE

This study explored whether sulfated AE (SAE) has promising cancer chemopreventive activities that may recommend it as a functional food supplement ‎instead of (or in addition to) AE for the population at risk of cancer and in the health food industry.

METHODS

Cytochrome P450-1A (CYP1A)‎ was estimated by fluorescence enzymatic reaction, using β-naphthoflavone-treated cells (CYP1A inducer). Peroxyl and hydroxyl radical scavenging was assayed by an oxygen radical absorbance capacity assay. Flow cytometry was used to analyze apoptosis/necrosis in MCF-7 cells, cell cycle phases in MCF-7 cells, and macrophage binding to fluorescein isothiocyanate-lipopolysaccharide (FITC-LPS)‎. Nitric oxide was determined by Griess assay in LPS-stimulated macrophages, and cytotoxicity was determined by MTT assay. Diethylnitrosamine (DEN) was used to induce hepatic tumor initiation in rats. Placental glutathione-S-transferase (GSTP; an initiation marker) was stained in a fluorescence immunohistochemical analysis of liver sections, and histopathological changes were examined.

RESULTS

SAE exhibited strong antitumor initiation and antitumor promotion activities. It suppressed CYP1A, ‎scavenged peroxyl and hydroxyl radicals, induced macrophage proliferation, suppressed ‎macrophage binding to FITC-LPS, inhibited nitric oxide generation, showed specific cytotoxicity to ‎human breast MCF-7 adenocarcinoma cells, and disturbed the cell cycle phases (S and G2/M phases) ‎in association with an increased percentage of apoptotic/necrotic MCF-7 cells. Over a short time period, DEN stimulated liver cancer initiation, but SAE treatment reduced the DEN-induced histopathological alterations and ‎inhibited CYP1A and GSTP.

CONCLUSION

SAE extract has the potential for use as an alternative to AE in health foods to provide cancer chemoprevention in populations at risk for cancer.

Extraction, structural analysis, and activities of rice bran polysaccharide

The rice bran polysaccharide was extracted from defatted rice bran, and the optimal conditions of the experiment were determined. The chemical structure of rice bran polysaccharide was analyzed by IR and ¹³ C NMR. Three rice bran polysaccharide derivatives were prepared and characterized, namely carboxymethylated rice bran polysaccharide, phosphorylated rice bran polysaccharide, and acetylated rice bran polysaccharide. It showed that the phosphorylated rice bran polysaccharide had good activity.

Enzyme-Responsive Biopolymeric Nanogel Fibers by Extrusion: Engineering of High-Surface-Area Hydrogels and Application in Bacterial Enzyme Detection

The fabrication of covalently cross-linked high-surface-area biopolymeric nanogel fibers by nanopore extrusion is reported for the first time. The biopolymer pullulan was functionalized with tert-butyl acetoacetate via a transesterification reaction to synthesize the water-soluble ketone-rich precursor pullulan acetoacetate (PUAA). PUAA and carbonic dihydrazide (CDH) as cross-linker were extruded through anodic aluminum oxide (AAO) nanoporous membranes, which possessed an average pore diameter of 61 ± 2 nm. By changing the concentration of PUAA, the flow rate, and extrusion time, the step polymerization cross-linking reaction was controlled so that the polymer can be extruded gradually during cross-linking through the membrane, avoiding the formation of macroscopic bulk hydrogels and rupture of the AAO membrane. Fibers with diameters on the order of 250 nm were obtained. This approach was also expanded to functionalized PUAA derivatives together with the fluorogenic substrate 4-methylumbelliferyl-β-d-glucuronide MUGlcU in (PUAA-MUGlcU), which exhibited a mean equilibrium swelling ratio of 5.7 and 9.0 in Milli-Q water and in phosphate-buffered saline, respectively. β-Glucuronidase was sensitively detected via fluorescence of 4-methylumbelliferone, which was liberated in the enzymatic hydrolysis reaction of PUAA-MUGlcU. Compared to hydrogel slabs, the rate of the hydrolysis was >20% higher in the nanogel fibers, facilitating the rapid detection of β-glucuronidase-producing Escherichia coli (E. coli Mach1-T1). Nanopore extruded nanogel fibers are therefore considered a viable approach to enhance the functionality of hydrogels in surface-dominated processes.

An Efficient Synthesis of Novel Dextran-Arsenite Nanoparticles intended for Potential Antitumor Drug Material

The functionalization of polysaccharides with synthetic nanopolymers has attracted great attention owing to the applications of this method in many industrial fields. This work aimed to investigate the effect of arsenic trioxide on the functionalization of dextran. Dextran-arsenite nanoparticle formation was induced by microwave with sulfuric acid as a catalyst. Various analytical techniques were used to verify the structure of the nanopolymers. Besides, various reaction conditions, such as dextran concentration, arsenic trioxide concentration and pH, were investigated to determine their impact on particle size. The results indicated that the product was an arsenite-based nanomaterial retaining the basic configuration of dextran and that the product size was positively correlated with pH but negatively correlated with arsenic trioxide concentration. Moreover, the inhibitory effects of the dextran-arsenite nanoparticles on the growth of the human colorectal cancer cell line HCT-116 and human hepatoma carcinoma cell lines Huh-7 and SMMC-7721 were studied. The results showed that the product could inhibit the proliferation of these three tumor cell lines in a dose-dependent manner. Therefore, the product could be a new type of functional nanomaterial for further study on the synthesis, biological activity and development of polysaccharide drugs.

Biochemical characterization of Nostoc sp. exopolysaccharides and evaluation of potential use in wound healing

Exopolysaccharides (EPS) produced by cyanobacteria are complex biomolecules of anionic nature with potential biomedical applications. In this study, the EPS produced by the Nostoc sp. strains PCC7936 and PCC7413 were characterized and evaluated as a biomaterial for new wound dressings. The addition of acetate ions to the culture medium slightly stimulated EPS production, achieving 1463.1 ± 16.0 mgL^-1 (PCC7413) and 1372.1 ± 29.0 mgL^-1 (PCC7936). Both EPS presented nine monosaccharide residues and a MW > 1000 kDa. The acetate addition changed the monosaccharide molar percentages. FTIR and DLS results confirmed the anionic nature and the presence of sulfate groups in both EPS, which are determinant features for biomedical applications. Both EPS at 1%(w/v) formed gels in the presence of 0.4%(w/v) FeCl₃. Results obtained for MTT assay and wound healing in vitro scratch assay revealed hydrogels biocompatibility and ability to promote fibroblast migration and proliferation that was greater in PCC7936. The Nostoc EPS hydrogels presented promising properties to be applied in the treatment of skin injuries.

Cancer Chemopreventive Properties of Sulfated Enterolobium cyclocarpum Extract

Enterolobium cyclocarpum (EC) is an edible plant and a gum source for food industries. Its sulfated polysaccharide extract (SEC) was examined for cancer chemopreventive properties to estimate its anti-tumor activity. The modulation of carcinogen metabolism and the antioxidant activity revealed that SEC is a potent tumor anti-initiator since it inhibited cytochrome P450-1A (CYP1A) and induced carcinogen detoxification enzyme glutathione-S-transferase. SEC is also a weak scavenger for hydroxyl and peroxyl radicals. SEC was found to modulate macrophage functions into an anti-inflammatory pattern, where it enhanced macrophage proliferation and phagocytosis of fluorescein isothiocyanate-lipopolysaccharide (FITC-LPS). In addition, SEC strongly inhibited the nitric oxide (NO) generation in LPS-stimulated macrophages and induced the binding affinity of FITC-LPS to macrophages. SEC exhibited specific cytotoxicity against human hepatocellular Hep G2 carcinoma cells. SEC disturbed the cell cycle phase, as indicated by the concomitant arrest in S- and G2/M-phases that was associated with necrosis induction. A short-term initiation model for liver cancer was prepared using diethylnitrosamine (DEN) in rats. SEC inhibited the DEN-histopathological findings and reduced both CYP1A and the tumor initiation marker placental glutathione S-transferase (GSTP). Taken together, SEC could be used as an alternative gum in health food industries to provide cancer prevention in high-risk populations.

Derivatization approaches and applications of pullulan

Pullulan (PUL), a linear exo-polysaccharide, is useful in industries as diverse as food, cosmetics and pharmaceuticals. PUL presents many favorable characteristics, such as renewable origin, biocompatibility, stability, hydrophilic nature, and availability of reactive sites for chemical modification. With an inherent affinity to asialoglycoprotein receptors, PUL can be used for targeted drug delivery to the liver. Besides, these primary properties have been combined with modern synthetic approaches for developing multifunctional biomaterials. This is evident from numerous studies on approaches, such as hydrophobic modification, cross-linking, grafting and transformation as a polyelectrolyte. In this review, we have discussed up-to-date advances on chemical modifications and emerging applications of PUL in targeted theranostics and tissue engineering. Besides, we offer an overview of its applications in food, cosmetics and environment remediation.

Design, synthesis, and biomedical applications of synthetic sulphated polysaccharides

This review summarizes the synthetic methods to sulphated polysaccharides, describes their compositional and structural diversity in regards to activity, and showcases their biomedical applications.

Slow-release NPK fertilizer encapsulated by carboxymethyl cellulose-based nanocomposite with the function of water retention in soil

In this study, new slow release fertilizer encapsulated by superabsorbent nanocomposite was prepared by in-situ graft polymerization of sulfonated-carboxymethyl cellulose (SCMC) with acrylic acid (AA) in the presence of polyvinylpyrrolidone (PVP), silica nanoparticles and nitrogen (N), phosphorous (P), and potassium (K) (NPK) fertilizer compound. The prepared materials were characterized by FT-IR, XRD and scanning electron microscopy (SEM) techniques. The incorporation of NPK fertilizer into hydrogel nanocomposite network was verified by results of these analyses. Also, the swelling behavior in various pH and saline solutions as well as water retention capability of the prepared hydrogel nanocomposite was evaluated. The fertilizer release behavior of the NPK loaded hydrogel nanocomposite was in good agreement with the standard of Committee of European Normalization (CEN), indicating its excellent slow release property. These good characteristics revealed that the hydrogel nanocomposite fertilizer formulation can be practically used in agricultural and horticultural applications.

The influences of added polysaccharides on the properties of bacterial crystalline nanocellulose

Acid hydrolyzed bacterial crystalline nanocellulose (BCNC) with different nanofiber morphologies, geometrical dimensions, crystalline structure and mechanical properties were obtained by adding different polysaccharides into the growing culture medium. Arabinogalactan had little effect on the characteristics of BCNC due to its negligible binding affinity to bacterial cellulose (BC). Bacterial exopolysaccharides were capable of modulating the bundling of cellulose microfibrils during BC formation, resulting in BCNC with bundled nanocrystals, high crystallinity, a less sulfated surface, and improved thermal stability and tensile properties. Xylan/BCNC and xyloglucan/BCNC exhibited the most significant improvements, including an increased length and aspect ratio, a significantly less sulfated surface and superior thermal stability and tensile properties. It is hypothesized that the improvement in CNC characteristics results from a change in amorphous cellulose formation in the native BC. This study also suggests that improved feedstocks for producing CNCs may be obtained by modulating hemicellulose production in plants.

Anti-Food Allergic Activity of Sulfated Polysaccharide from Gracilaria lemaneiformis is Dependent on Immunosuppression and Inhibition of p38 MAPK

Polysaccharides from Gracilaria lemaneiformis in particular possess various bioactive functions, but their antiallergic activity remains incompletely defined. Sulfated polysaccharide from Gracilaria lemaneiformis (GLSP) was obtained by water extraction and ethanol precipitation followed by column chromatography. BALB/c mice, RBL-2H3, and KU812 cells were used for verifying the anti food allergic activity of GLSP. According to the results of mice experiment, GLSP was able to alleviate allergy symptoms, to reduce TM-specific IgE and IgG1, to suppress Th2 cell polarization, and to promote the function of regulatory T (Treg) cells. In addition, GLSP had the ability to inhibit the function of RBL-2H3 cells. Furthermore, GLSP inhibited the activation of KU812 via suppression of p38 mitogen-activated protein kinase (MAPK). In conclusion, immunosuppression as well as the reduction in the level of p38 MAPK may contribute to GLSP's putative activity against food allergy. GLSP may be used as a functional food component for allergic patients.

Preparation of Esterified Bacterial Cellulose for Improved Mechanical Properties and the Microstructure of Isotactic Polypropylene/Bacterial Cellulose Composites

Bacterial cellulose (BC) has great potential to be used as a new filler to reinforce isotactic polypropylene (iPP) due to its high crystallinity, biodegradability, and efficient mechanical properties. In this study, esterification was used to modify BC, which improved the surface compatibility of the iPP and BC. The results indicated that the cellulose octoate (CO) changed the surface properties from hydrophilic to lipophilic. Compared to the pure iPP, the tensile strength, charpy notched impact strength, and tensile modulus of the iPP/BC composites increased by 9.9%, 7.77%, and 15.64%, respectively. However, the addition of CO reinforced the iPP/CO composites. The tensile strength, charpy notched impact strength, and tensile modulus of the iPP/CO composites increased by 14.23%, 14.08%, and 17.82% compared to the pure iPP. However, the elongation at break of both the composites is decreased. The SEM photographs and particle size distribution of the composites showed improvements when the change of polarity of the BC surface, interface compatibility, and dispersion of iPP improved.

Non-covalent modification of graphene oxide nanocomposites with chitosan/dextran and its application in drug delivery

Graphene oxide nanosheets non-covalent functionalized with chitosan/dextran was successfully developed via LbL self-assembly technique for anti-cancer drug delivery application.

Antiviral Activity of Sulfated Polysaccharide of Adenanthera pavonina against Poliovirus in HEp-2 Cells

Adenanthera pavonina, popularly known as red-bead tree, carolina, pigeon's eye, and dragon's eye, is a plant traditionally used in Brazil for the treatment of several diseases. The present study aimed at evaluating the activity of sulfated polysaccharide from the Adenanthera pavonina (SPLSAp) seeds against poliovirus type 1 (PV-1) in HEp-2 cell cultures. The SPLSAp presented a cytotoxic concentration (CC₅₀) of 500 μg/mL in HEp-2 cell cultures, evaluated by the dimethylthiazolyl-diphenyltetrazolium bromide method (MTT). The SPLSAp exhibited a significant antiviral activity, with a 50% inhibitory concentration (IC₅₀) of 1.18 µg/mL, determined by plaque reduction assay and a high selectivity index (SI) of 423. The maximum inhibition (100%) of PV replication was found when the SPLSAp treatment was concomitant with viral infection (time 0 h), at all tested concentrations. The maximal inhibition was also found when the SPLSAp was used 1 h and 2 h postinfection, albeit at 50 μg/mL and 100 μg/mL. Therefore, we demonstrated that the SPLSAp inhibited PV growth. We also suggested that SPLSAp inhibited PV in more than one step of the replication, as the mechanism of antiviral action. We, therefore, selected the compound as a potential candidate for further development towards the control of the infection.

Characterization and cytotoxic activity of sulfated derivatives of polysaccharides from Agaricus brasiliensis

Agaricus brasiliensis cell-wall polysaccharides isolated from fruiting body (FR) and mycelium (MI) and their respective sulfated derivatives (FR-S and MI-S) were chemically characterized using elemental analysis, TLC, FT-IR, NMR, HPLC, and thermal analysis. Cytotoxic activity was evaluated against A549 tumor cells by MTT and sulforhodamine assays. The average molecular weight (Mw) of FR and MI was estimated to be 609 and 310 kDa, respectively. FR-S (127 kDa) and MI-S (86 kDa) had lower Mw, probably due to hydrolysis occurring during the sulfation reaction. FR-S and MI-S presented ~14% sulfur content in elemental analysis. Sulfation of samples was characterized by the appearance of two new absorption bands at 1253 and 810 cm(-1) in the infrared spectra, related to S=O and C-S-O sulfate groups, respectively. Through (1)H and (13)C NMR analysis FR-S was characterized as a (1→6)-(1→3)-β-D-glucan fully sulfated at C-4 and C-6 terminal and partially sulfated at C-6 of (1→3)-β-D-glucan moiety. MI-S was shown to be a (1→3)-β-D-gluco-(1→2)-β-D-mannan, partially sulfated at C-2, C-3, C-4, and C-6, and fully sulfated at C-6 of the terminal residues. The combination of high degree of sulfation and low molecular weight was correlated with the increased cytotoxic activity (48 h of treatment) of both FR-S (EC₅₀=605.6 μg/mL) and MI-S (EC₅₀=342.1 μg/mL) compared to the non-sulfated polysaccharides FR and MI (EC₅₀>1500 μg/mL).