Coordinating ability of ligands derived from phenylenediamines

Mixed-Valent Trinuclear CoIII-CoII-CoIII Complex with 1,3-Bis(5-chlorosalicylideneamino)-2-propanol

A mixed-valent trinuclear complex with 1,3-bis(5-chlorosalicylideneamino)-2-propanol (H₃clsalpr) was synthesized, and the crystal structure was determined by the single-crystal X-ray diffraction method at 90 K. The molecule is a trinuclear Co^III-Co^II-Co^III complex with octahedral geometries, having a tetradentate chelate of the Schiff-base ligand, bridging acetate, monodentate acetate coordination to each terminal Co³⁺ ion and four bridging phenoxido-oxygen of two Schiff-base ligands, and two bridging acetate-oxygen atoms for the central Co²⁺ ion. The electronic spectral feature is consistent with the mixed valent Co^III-Co^II-Co^III. Variable-temperature magnetic susceptibility data could be analyzed by consideration of the axial distortion of the central Co²⁺ ion with the parameters Δ = –254 cm⁻¹, λ = –58 cm⁻¹, κ = 0.93, tip = 0.00436 cm³ mol⁻¹, θ = –0.469 K, g_z = 6.90, and g_x = 2.64, in accordance with a large anisotropy. The cyclic voltammogram showed an irreversible reduction wave at approximately −1.2 V·vs. Fc/Fc⁺, assignable to the reduction of the terminal Co³⁺ ions.

Heteroligand Metal Complexes with Extended Redox Properties Based on Redox-Active Chelating Ligands of o-Quinone Type and Ferrocene

A combination of different types of redox-active systems in one molecule makes it possible to create coordination compounds with extended redox abilities, combining molecular and electronic structures determined by the features of intra- and intermolecular interactions between such redox-active centres. This review summarizes and analyses information from the literature, published mainly from 2000 to the present, on the methods of preparation, the molecular and electronic structure of mixed-ligand coordination compounds based on redox-active ligands of the o-benzoquinone type and ferrocenes, ferrocene-containing ligands, the features of their redox properties, and some chemical behaviour.

Synthesis, characterization and theoretical determination of corrosion inhibitor activities of some new 4,5-dihydro-1H-1,2,4-Triazol-5-one derivatives

Nine novel {bis-4-[(3-alkyl-5-oxo-1H-1,2,4-triazol-4(5H)-yl)-iminomethyl]-phenyl} [1,1'-biphenyl]-4,4'-disulfonates were synthesized and their structures were determined with spectral methods. Corrosion inhibitor activities of the title compounds were investigated using quantum mechanical methods. The parameters such as the Energy of the Highest Occupied Molecular Orbital (E_HOMO), Energy of the Lowest Unoccupied Molecular Orbital (E_LUMO), energy gap (ΔE = E_LUMO - E_HOMO) and dipole moment (μ) which are related to the corrosion effectivity of the organic compounds whose the molecular geometry and electronic properties are especially studied, were determined by using the density function theory method. Using these calculation results, properties such as hardness (ɳ), softness (σ), electronegativity (χ) values were calculated. Also quantum chemical parameters such as the fraction of transferred electrons (ΔN) between the iron surface and the 4,5-dihydro-1H-1,2,4-triazole-5-one derivative compounds were calculated. It has been discussed that which parameters have a good linear relationship with inhibition efficiency. The results of the calculations show that there is a close relationship between the activity of organic-based corrosion inhibitors showing good corrosion inhibitor activity and the calculated quantum chemical parameters of the process. Thus, corrosion inhibitor activity can be predicted without conducting an experimental study.

Radical-Type Reactivity and Catalysis by Single-Electron Transfer to or from Redox-Active Ligands

Controlled ligand-based redox-activity and chemical non-innocence are rapidly gaining importance for selective (catalytic) processes. This Concept aims to provide an overview of the progress regarding ligand-to-substrate single-electron transfer as a relatively new mode of operation to exploit ligand-centered reactivity and catalysis based thereon.

Cobalt complexes with redox-active anthraquinone-type ligands

Three anthraquinone-type multidentate ligands, HL1-3 (HL = 2-R-1H-anthra[1,2-d]imidazole-6,11-dione; HL1: R = (2-pyridyl), HL2; R = (4,6-dimethyl-2-pyridyl), HL3; R = (6-methoxy-2-pyridyl)), were prepared, and their complexation behaviour was investigated. Three bis-chelate cobalt complexes with the formula [CoII(L1-3)2]·n(solv.) (1, 2, and 3 for HL1, HL2, and HL3, respectively), in which the ligands adopted tridentate binding modes, were synthesized and structurally characterized by single-crystal X-ray analyses. Electrochemical studies of 1-3 in CH2Cl2 reveal three reversible redox waves, assigned to ligand and cobalt-centred processes. Additional complexes were obtained in which HL1 adopted a bidentate binding mode, stabilising the mono-chelate [CoII(HL1)(NO3)2(DMF)2] (4) species and tris-chelate [CoIII(L1)3] (5) complex in which the cobalt ion was in its 3+ state. The electrochemical properties of complex 5 were investigated in DMF, and the Co(ii)/Co(iii) redox couple was found to be negatively shifted compared to that of complex 1, while the ligand-based processes became irreversible. Tridentate chelation is found to stabilise the anthraquinone ligands and unlocks their redox multi-stability.

Generation of reactive cobalt oxo oxamate radical species for biomimetic oxidation of contaminants

Bio-inspired formation of [Co^IVO˙]⁻ species: cobalt oxo radical intermediate was directly observed in ESI-MS.

Multiple deprotonation of primary aromatic diamines by LiAlH4

Reaction of LiAlH₄with 1,2-phenylenediamine (1H₄) in THF gives [{Al(1H₂)}₂{Al(1H)₂}₂][Li(THF)₂]₄, containing the largest aluminate of its type so far reported.

Rectangular coordination polymer nanoplates: large-scale, rapid synthesis and their application as a fluorescent sensing platform for DNA detection

In this paper, we report on the large-scale, rapid synthesis of uniform rectangular coordination polymer nanoplates (RCPNs) assembled from Cu(II) and 4,4′-bipyridine for the first time. We further demonstrate that such RCPNs can be used as a very effective fluorescent sensing platform for multiple DNA detection with a detection limit as low as 30 pM and a high selectivity down to single-base mismatch. The DNA detection is accomplished by the following two steps: (1) RCPN binds dye-labeled single-stranded DNA (ssDNA) probe, which brings dye and RCPN into close proximity, leading to fluorescence quenching; (2) Specific hybridization of the probe with its target generates a double-stranded DNA (dsDNA) which detaches from RCPN, leading to fluorescence recovery. It suggests that this sensing system can well discriminate complementary and mismatched DNA sequences. The exact mechanism of fluorescence quenching involved is elucidated experimentally and its use in a human blood serum system is also demonstrated successfully.

Coordination polymer nanobelts for nucleic acid detection

Herein, coordination polymer nanobelts (CPNBs) were prepared rapidly and on a large scale, by directly mixing aqueous AgNO(3) solution and an ethanol solution of 4, 4'-bipyridine at room temperature. The application of such CPNBs as a fluorescent sensing platform for nucleic acid detection was further explored. CPNB is a π-rich structure, the strong π-π stacking interactions between unpaired DNA bases and CPNB leads to adsorption of fluorescently labeled single-stranded DNA (ssDNA) accompanied by 66% fluorescence quenching. However, the presence of target ssDNA will hybridize with the probe. The resultant helix cannot be adsorbed by CPNB due to its rigid conformation and the absence of unpaired DNA bases. Thus, a significant fluorescence enhancement, 73% fluorescence recovery, was observed in DNA detection as long as the target exists. The present system has excellent sensitivity; a substantial fluorescence enhancement was observed when the concentration of the target was as low as 5 nM. It also exhibits outstanding discrimination ability down to a single-base mismatch.

Synthesis, characterization and antifungal activity of a series of manganese(II) and copper(II) complexes with ligands derived from reduced N,N'-O-phenylenebis(salicylideneimine)

A series of manganese(II) and copper(II) complexes with reduced Schiff bases derived from o-phenylenediamine has been prepared and characterized by elemental analysis, TG measurements, ESR, magnetic measurements, FTIR, UV-Visible spectra and conductivity. These complexes were found to be [MnL(H2O)n] and [CuL](H2O)n species with n=0-2. Their antifungal activity was evaluated on different human fungi including yeasts of the Candida genus (C. albicans, C. glabrata, C. tropicalis and C. parapsilopsis) some opportunistic moulds belonging to the Aspergillus (A. fumigatus, A. terreus and A. flavus), Scedosporium genus (S. apiospermum and S. prolificans) and some dermatophytes (M. gypseum, M. persicolor, T. mentagrophytes, M. canis and T. tonsurans). The manganese complexes showed a significant growth inhibition of the dermatophytes tested and fungi of the genus Scedosporium. This is very interesting as these fungi are usually poorly susceptible to current antifungal including Amphotericin B and Itraconazole chosen as reference in this study.

A new lead(II)-selective PVC-coated graphite rod electrode based on a Schiff base complex

A new lead(II)-selective electrode has been developed based on bis(acetylacetone)-p-phenylenediamine-lead(II) [LPb(NO3)2]H2O complex ionophore as a sensing material, dioctylphthalate (DOP) as a solvent mediator and PVC as a matrix. This electrode exhibits a linear Nernstian response over the concentration range of 1 x 10(-5)-1 x 10(-1) mol l(-1) of Pb(II) cation, with a cationic calibration slope of 30.0 +/- 0.2 mV/concentration decade and a detection limit of 2 x 10(-6) mol l(-1) (0.40 ppm). It has a fast response time and can be used for a period of 2 months without any divergence in potentials. The proposed electrode reveals a good selectivity for Pb(II) over a wide variety of other tested cations and could be used in the pH range of 4-8. It was successfully used for direct determination of Pb(II) concentration in some samples. The obtained results show a good agreement with those obtained by an atomic absorption spectrometric method. The average recovery obtained is 96.5 +/- 0.5% with standard deviation of 1.2% (n = 8).