A study of kinetics of adsorption of alkanethiols on gold using electrochemical impedance spectroscopy

Elucidating the Influence of Electrical Potentials on the Formation of Charged Oligopeptide Self-Assembled Monolayers on Gold

Self-assembled monolayers (SAMs) based on oligopeptides have garnered immense interest for a wide variety of innovative biomedical and electronic applications. However, to exploit their full potential, it is necessary to understand and control the surface chemistry of oligopeptides. Herein, we report on how different electrical potentials affect the adsorption kinetics, stability and surface coverage of charged oligopeptide SAMs on gold surfaces. Kinetic analysis using electrochemical surface plasmon resonance (e-SPR) reveals a slower oligopeptide adsorption rate at more positive or negative electrical potentials. Additional analysis of the potential-assisted formed SAMs by X-ray photoelectron spectroscopy demonstrates that an applied electrical potential has minimal effect on the packing density. These findings not only reveal that charged oligopeptides exhibit a distinct potential-assisted assembly behaviour but that an electrical potential offers another degree of freedom in controlling their adsorption rate.

Sensitive and Reversible Detection of Methanol and Water Vapor by In Situ Electrochemically Grown CuBTC MOFs on Interdigitated Electrodes

The in situ electrochemical growth of Cu benzene-1,3,5-tricarboxylate (CuBTC) metal-organic frameworks, as an affinity layer, directly on custom-fabricated Cu interdigitated electrodes (IDEs) is described, acting as a transducer. Crystalline 5-7 µm thick CuBTC layers are grown on IDEs consisting of 100 electrodes with a width and a gap of both 50 µm and a height of 6-8 µm. These capacitive sensors are exposed to methanol and water vapor at 30 °C. The affinities show to be completely reversible with higher affinity toward water compared to methanol. For exposure to 1000 ppm methanol, a fast response is observed with a capacitance change of 5.57 pF at equilibrium. The capacitance increases in time followed diffusion-controlled kinetics (k = 2.9 mmol s^-0.5 g^-1_CuBTC ). The observed capacitance change with methanol concentration follows a Langmuir adsorption isotherm, with a value for the equilibrium affinity K_e = 174.8 bar^-1 . A volume fraction f_MeOH = 0.038 is occupied upon exposure to 1000 ppm of methanol. The thin CuBTC affinity layer on the Cu-IDEs shows fast, reversible, and sensitive responses to methanol and water vapor, enabling quantitative detection in the range of 100-8000 ppm.

In situ Electrochemical Impedance Spectroscopy of Electrostatically Driven Selective Gold Nanoparticle Adsorption on Block Copolymer Lamellae

Electrostatic attraction between charged nanoparticles and oppositely charged nanopatterned polymeric films enables tailored structuring of functional nanoscopic surfaces. The bottom-up fabrication of organic/inorganic composites for example bears promising potential toward cheap fabrication of catalysts, optical sensors, and the manufacture of miniaturized electric circuitry. However, only little is known about the time-dependent adsorption behavior and the electronic or ionic charge transfer in the film bulk and at interfaces during nanoparticle assembly via electrostatic interactions. In situ electrochemical impedance spectroscopy (EIS) in combination with a microfluidic system for fast and reproducible liquid delivery was thus applied to monitor the selective deposition of negatively charged gold nanoparticles on top of positively charged poly(2-vinylpyridinium) (qP2VP) domains of phase separated lamellar poly(styrene)-block-poly(2-vinylpyridinium) (PS-b-qP2VP) diblock copolymer thin films. The acquired impedance data delivered information with respect to interfacial charge alteration, ionic diffusion, and the charge dependent nanoparticle adsorption kinetics, considering this yet unexplored system. We demonstrate that the selective adsorption of negatively charged gold nanoparticles (AuNPs) on positively charged qP2VP domains of lamellar PS-b-qP2VP thin films can indeed be tracked by EIS. Moreover, we show that the nanoparticle adsorption kinetics and the nanoparticle packing density are functions of the charge density in the qP2VP domains.

A metal-responsive interdigitated bilayer for selective quantification of mercury(ii) traces by surface plasmon resonance

An innovative design of reusable SPR chips allowing the quantitative and selective determination of mercury(ii) at the ppt level is reported.

Incorporation of extra amino acids in peptide recognition probe to improve specificity and selectivity of an electrochemical peptide-based sensor

We investigated the effect of incorporating extra amino acids (AA) at the n-terminus of the thiolated and methylene blue-modified peptide probe on both specificity and selectivity of an electrochemical peptide-based (E-PB) HIV sensor. The addition of a flexible (SG)3 hexapeptide is, in particular, useful in improving sensor selectivity, whereas the addition of a highly hydrophilic (EK)3 hexapeptide has shown to be effective in enhancing sensor specificity. Overall, both E-PB sensors fabricated using peptide probes with the added AA (SG-EAA and EK-EAA) showed better specificity and selectivity, especially when compared to the sensor fabricated using a peptide probe without the extra AA (EAA). For example, the selectivity factor recorded in the 50% saliva was ∼2.5 for the EAA sensor, whereas the selectivity factor was 7.8 for both the SG-EAA and EK-EAA sensors. Other sensor properties such as the limit of detection and dynamic range were minimally affected by the addition of the six AA sequence. The limit of detection was 0.5 nM for the EAA sensor and 1 nM for both SG-EAA and EK-EAA sensors. The saturation target concentration was ∼200 nM for all three sensors. Unlike previously reported E-PB HIV sensors, the peptide probe functions as both the recognition element and antifouling passivating agent; this modification eliminates the need to include an additional antifouling diluent, which simplifies the sensor design and fabrication protocol.

Switching on/off the chemisorption of thioctic-based self-assembled monolayers on gold by applying a moderate cathodic/anodic potential

An in situ and real-time electrochemical method has been devised for quantitatively monitoring the self-assembly of a ferrocene-labeled cyclic disulfide derivative (i.e., a thioctic acid derivative) on a polycrystalline gold electrode under electrode polarization. Taking advantage of the high sensitivity, specificity, accuracy, and temporal resolution of this method, we were able to demonstrate an unexpectedly facilitated formation of the redox-active SAM when the electrode was held at a moderate cathodic potential (-0.4 V vs SCE in CH3CN), affording a saturated monolayer from only micromolar solutions in less than 10 min, and a totally impeded SAM growth when the electrode was polarized at a slightly anodic potential (+0.5 V vs SCE in CH3CN). This method literally allows for switching on/off the formation of SAMs under "soft" conditions. Moreover the cyclic disulfide-based SAM was completely desorbed at this potential contrary to the facilitated deposition of a ferrocene-labeled alkanethiol. Such a strikingly contrasting behavior could be explained by an energetically favored release of the thioctic-based SAM through homolytic cleavage of the Au-S bond followed by intramolecular cyclization of the generated thiyl diradicals. Moreover, the absence of a discernible transient faradaic current response during the potential-assisted adsorption/desorption of the redox-labeled cyclic disulfide led us to conclude in a potential-dependent reversible surface reaction where no electron is released or consumed. These results provide new insights into the formation of disulfide-based SAMs on gold but also raise some fundamental questions about the intimate mechanism involved in the facilitated adsorption/desorption of SAMs under electrode polarization. Finally, the possibility to easily and selectively address the formation/removal of thioctic-based SAMs on gold by applying a moderate cathodic/anodic potential offers another degree of freedom in tailoring their properties and in controlling their self-assembly, nanostructuration, and/or release.

Electrochemical and spectroscopic study of the self-assembling mechanism of normal and chelating alkanethiols on copper

The self-assembly of aliphatic thiol (RSH), dithiol (R(SH)(2)), and dithiocarboxylic acid (RS(2)H) onto mildly oxidized and highly oxidized copper was studied in real time by in situ electrochemical impedance spectroscopy (EIS). Ex situ characterization of the films was carried out using linear sweep voltammetry (LSV), polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS), and X-ray photoelectron spectroscopy (XPS). In situ EIS studies found a very fast adsorption of RSH, R(SH)(2), and RS(2)H (within 10-15 s). This fast adsorption step is followed by the long-term additional adsorption and consolidation of SAM. However, the self-assembly of RS(2)H passes through an intermediate step of molecule rearrangement for around 10 to 30 min after around 2 to 7 min of self-assembly. The binding of both sulfur moieties of R(SH)(2) with Cu happens simultaneous. The oxide reduction capacity of RSH, R(SH)(2), and RS(2)H was good. However, the XPS studies showed the decomposition of RS(2)H-based SAMs to Cu(2)S. Monolayers prepared on both mildly oxidized and heavily oxidized Cu with R(SH)(2) had the highest stability. Monolayers of RS(2)H showed the least stability on both mildly oxidized and heavily oxidized Cu. Although RSH-based SAMs had good organization on both mildly oxidized and highly oxidized Cu, R(SH)(2)-based SAMs did not show good organization in either case. The RS(2)H monolayer had good organization only on mildly oxidized Cu.

Influence of solvation and the structure of adsorbates on the kinetics and mechanism of dimerization-induced compositional changes of mixed monolayers on TiO(2)

Mixed monolayers of thiol-terminated (T) and methyl-terminated (Me) carboxylic acids on nanocrystalline TiO(2) films underwent dimerization-induced compositional changes. At short reaction times, the compositions of mixed monolayers were kinetically controlled and mirrored the compositions of coadsorption solutions. On time scales up to several hours, well after the establishment of saturation surface coverages, the monolayers relaxed to thermodynamically controlled compositions through the displacement of Me by T. Equilibration was driven by the formation of intermolecular disulfide bonds between thiol groups of adsorbed T, which yielded polydentate dimeric adsorbates that were bound more strongly than monomeric adsorbates to TiO(2). The rate of compositional changes increased with decreasing solvent viscosity and decreasing alkyl chain length of T, suggesting that the rate of adsorption of T to TiO(2) strongly influenced the overall kinetics under certain conditions. Steric bulk within adsorbates and the strength of surface-attachment interactions also influenced the rate of compositional changes. A kinetic model, derived on the basis of Langmuir adsorption and desorption kinetics, accounts for key aspects of the mixed-monolayer compositional changes. The rate-determining step in the overall mechanism involved either the adsorption of T or the formation of disulfide bonds, depending on the conditions under which monolayers were prepared. Our findings illustrate that dimerization and other intermolecular interactions between adsorbates may dramatically influence the composition and terminal functionalization of mixed monolayers.

Electron transfer studies on cholesterol LB films assembled on thiophenol and 2-naphthalenethiol self-assembled monolayers

We have formed the cholesterol monolayer and multilayer LB films on the self-assembled monolayers of 2-naphthalenethiol (2-NT) and thiophenol (TP) and studied the electrochemical barrier properties of these composite films using cyclic voltammetry and electrochemical impedance spectroscopy. We have also characterized the cholesterol monolayer film using grazing angle FTIR, scanning tunneling microscopy (STM) and atomic force microscopy (AFM). Cholesterol has a long hydrophobic steroid chain, which makes it a suitable candidate to assemble on the hydrophobic surfaces. We find that the highly hydrophobic surface formed by the self-assembled monolayers (SAM) of 2-NT and TP act as effective platforms for the fabrication of cholesterol monolayer and multilayer films. The STM studies show that the cholesterol monolayer films on 2-NT form striped patterns with a separation of 1.0 nm between them. The area per cholesterol molecule is observed to be 0.64 nm2 with a tilt angle of about 28.96 degrees from the surface normal. The electrochemical studies show a large increase in charge transfer resistance and lowering of interfacial capacitance due to the formation of the LB film of cholesterol. We have compared the behavior of this system with that of cholesterol monolayer and multilayers formed on the self-assembled monolayer of thiophenol.

Kinetics of pH Response for Copolymer Films with Dilute Carboxylate Functionality

We have investigated the effects of film composition and thickness on the rate of pH-induced response of a copolymer film containing predominately polymethylene with randomly distributed carboxylic acid side groups (denoted as PM-CO2H). These responsive films are prepared directly onto a gold electrode surface by surface-catalyzed polymerization and subsequent hydrolysis. We measured electrochemical impedance at fixed frequency (100 Hz) to monitor the barrier properties of the polymer film during a step change in pH. At a 1-3% molar acid content, the copolymer films exhibit a 2 order of magnitude change in impedance at 100 Hz when the contacting solution pH changes from 11 to 4 (or 4 to 11). For all films, the rate of protonation is slower than that of ionization, consistent with a more gradual transfer of protons through an increasingly hydrophobic film at the outermost nanometers during the protonation step. Increased acid content within the film accelerates both the rate of protonation and ionization. Thinner films (50 nm) with the same acid content show faster response rate in both directions, since water and ions have a shorter transfer path. A large and reversible pH response was obtained for all films studied, but selection of appropriate film composition and thickness can greatly influence the rate of response.

Method for measuring the self-assembly of alkanethiols on gold at femtomolar concentrations

We describe a cantilever-based method for measuring the self-assembly of alkanethiols on a gold surface in a flow system that permits easy step changes in concentration and acquire a continuous in situ measure of the resulting chemisorption through the change in resonance frequency. A gold-coated (2.2 mm2), piezoelectric-excited, millimeter-sized cantilever (PEMC) sensor was exposed to 1-hexadecanethiol (HDT) in ethanol at concentrations ranging from 1 fM to 1 mM, sequentially and separately. A high-order flexural mode at approximately 850 kHz was monitored during the self-assembly. The resonance frequency decreases as a result of increased mass as chemisorption occurs on the surface. We show for the first time that the chemisorption of HDT at 1 fM is readily measurable and gave a response of 220 +/- 13 Hz (n = 4). At higher concentrations (10 and 100 fM; 1, 10, and 100 pM; 1, 10, and 100 nM; 1 microM; and 1 mM), the responses were proportionately, but nonlinearly, higher. At high concentrations (1 mM), the responses to C4, C8, C11, C16, and C18 alkanethiols were linearly proportional and were complete in approximately 25 min. We report for the first time that, once the Au surface is equilibrated at 1 pM, further chemisorption at a lower HDT concentration does not take place, even though over 99% of surface adsorption sites are available. At 1 fM, the overall chemisorption rate did not increase with a 2-fold increase in the HDT flow rate, suggesting that chemisorption at 1 fM is not transport-limited. The measured overall chemisorption rate constant at 1 fM was more rapid than 0.1 min-1.

Adsorption Dynamics and Electrochemical and Photophysical Properties of Thiolated Ruthenium 2,2‘-Bipyridine Monolayers

A new complex [Ru(bpy)(2)(bpySH)](PF(6))(2), RuBpySH, has been prepared bearing two anchoring groups for surface attachment, where bpy is 2,2'-bipyridyl and bpySH is 5,5'-bis(mercaptomethyl)-2,2'-bipyridine. Monolayers of RuBpySH have been formed on micro and macro platinum electrodes by spontaneous adsorption from micromolar solutions of the complex in 50:50 v/v water/acetone. The monolayers can be reversibly switched between the Ru(2+) and the Ru(3+) forms. Cyclic voltammetry is well-defined with a peak-to-peak splitting of 30 +/- 5 mV and a full width at half-maximum of 110 +/- 10 mV being observed for scan rates up to 5 V s(-1) where the supporting electrolyte is 0.1 M tetrabutylammonium tetrafluoroborate in acetonitrile. Adsorption is irreversible in this system, and the saturation coverage obtained is 8.1 +/- 0.4 x 10(-11) mol cm(-2) when the complex concentration in the deposition solution is between 10 microM and 1.0 mM. The dynamics of adsorption depend markedly on the bulk concentration and are described in terms of irreversible adsorption. Dry monolayers display luminescence properties similar to those of powder samples of the complex, indicating that the monolayer has characteristics of the solid-state sample rather than the solution sample of the complex. Significantly, efficient electrochemiluminescence is generated using tripropylamine as the coreactant. The rate of electron transfer across the electrode/monolayer interface has been probed using high scan rate cyclic voltammetry. The standard heterogeneous electron-transfer rate constant, k degrees , is 0.9 +/- 0.1 x 10(4) s(-1), and there is weak adsorbate-electrode electronic communication.

Self-assembled monolayers of alkanethiols on gold prepared in a hexagonal lyotropic liquid crystalline phase of Triton X-100/water system

In this paper, we have reported a new method of preparing self-assembled monolayers (SAMs) of decanethiol and hexadecanethiol on gold surface by using a lyotropic liquid crystalline phase as an adsorbing medium. The stability and blocking ability of these SAMs were characterized using grazing angle Fourier transform infrared (FTIR) spectroscopy and electrochemical techniques such as cyclic voltammetry and electrochemical impedance spectroscopy. The lyotropic liquid crystalline medium possesses a hexagonal structure consisting of a nonionic surfactant Triton X-100, water, and the corresponding thiol, which provides a highly hydrophobic environment to solubilize the alkanethiols and later to facilitate their delivery to the gold surface. We find that the SAMs formed from the hexagonal liquid crystalline phase are highly compact and have excellent electrochemical blocking ability towards the redox probes compared to conventional SAMs prepared from commonly used organic solvents such as ethanol. From the impedance studies, we have determined the capacitance of the monolayer-coated electrodes and the surface coverage of the SAM, which has been found to be >99.98% on gold surface. We have also estimated the extent of ionic permeability through the film and measured the rate constants for the redox reactions on the SAM-modified electrodes. Our results show that the rate constants of [Fe(CN)6](3-/4-) and [Ru(NH3)6](2+/3+) redox couples are very much lower in the case of monolayers prepared in liquid crystalline phase compared to the SAM formed in 1 mM thiol in ethanol solution, suggesting a better blocking ability of the SAMs in the former case. From the grazing angle FTIR spectroscopic studies and capacitance measurements, we have ruled out any coadsorption of surfactant molecules on the Au surface. These results suggest that SAMs of very low defect density and extremely low ionic permeability can be obtained when a hexagonal lyotropic liquid crystalline phase is used as an adsorbing medium.

Monitoring of the self-assembled monolayer of 1-hexadecanethiol on a gold surface at nanomolar concentration using a piezo-excited millimeter-sized cantilever sensor

In this paper, we describe a new method of measuring alkanethiol monolayer formation on a gold surface. A gold-coated millimeter-sized rectangular-shaped lead zirconate titanate (PZT) cantilever of dimensions 3.5 x 2 x 0.05 mm, previously shown to detect a picogram level of mass change, was used to measure the adsorption kinetics of 1-hexadecanethiol in ethanol over six orders of concentration range (1 nM to 10 mM) in real time. The flexural mode of cantilever vibration, 45.5 +/- 0.01 kHz, was monitored during the self-assembly. The total resonant frequency change obtained for the 1 nM, 10 nM, 100 nM, 1 microM, 4 mM, 8 mM, and 10 mM thiol concentrations were 116 +/- 2 (n = 2), 225 (n = 1), 270 +/- 10 (n = 2), 440 +/- 10 (n = 2), 900 +/- 10 (n = 2), 900 +/- 10 (n = 2), and 900 +/- 10 (n = 2) Hz, respectively. These results compare favorably to literature results in that the rate of the monolayer formation is concentration-dependent and the exponential change during adsorption follows the reversible first-order Langmuir kinetic model. The rate constants of adsorption and desorption were 0.061 M(-1) s(-1) and 3.61 x 10(-4) s(-1), respectively. The significance of the results is that millimeter-sized PZT cantilevers can be used in real-time for characterizing self-assembly of monolayer formation at nanomolar concentration levels. In addition, at 1 nM, the adsorption was found not to be diffusion limited.