Decoloration of azo dye using atomic hydrogen permeating through a Pt-modified palladized Pd sheet electrode

Electrocatalytic Hydrogenation Using Palladium Membrane Reactors

Hydrogenation is a crucial chemical process employed in a myriad of industries, often facilitated by metals such as Pd, Pt, and Ni as catalysts. Traditional thermocatalytic hydrogenation usually necessitates high temperature and elevated pressure, making the process energy intensive. Electrocatalytic hydrogenation offers an alternative but suffers from issues such as competing H2 evolution, electrolyte separation, and limited solvent selection. This Perspective introduces the evolution and advantages of the electrocatalytic Pd membrane reactor (ePMR) as a solution to these challenges. ePMR utilizes a Pd membrane to physically separate the electrochemical chamber from the hydrogenation chamber, permitting the use of water as the hydrogen source and eliminating the need for H2 gas. This setup allows for greater control over reaction conditions, such as solvent and electrolyte selection, while mitigating issues such as low Faradaic efficiency and complex product separation. Several representative hydrogenation reactions (e.g., hydrogenation of C=C, C≡C, C=O, C≡N, and O=O bonds) achieved via ePMR over the past 30 years were concisely discussed to highlight the unique advantages of ePMR. Promising research directions along with the advancement of ePMR for more challenging hydrogenation reactions are also proposed. Finally, we provide a prospect for future development of this distinctive hydrogenation strategy using hydrogen-permeable membrane electrodes.

Atomic Hydrogen in Electrocatalytic Systems: Generation, Identification, and Environmental Applications

Electrochemical reduction has emerged as a viable technology for the removal of a variety of organic contaminants from water. Atomic hydrogen (H*) is the primary species generated in electrochemical reduction processes. In this work, identification and quantification for H* are reviewed with a focus on methods used to generate H* at different positions. Additionally, we present recently developed proposals for the surface chemistry mechanisms of H* on the most commonly used cathodes as well as the use of H* in standard electrochemical reactors. The proposed reaction pathways in different H* systems for environmental applications are also discussed in detail. As shown in this review, the key hurdles facing H* reduction technologies are related to i) the establishment of systematic and practical synthetic methods; ii) the development of effective identification approaches with high specificity; and, iii) an in-depth exploration of the H* reaction mechanism to better understand the reaction process of H*.

Nanoporous Fe-Based Alloy Prepared by Selective Dissolution: An Effective Fenton Catalyst for Water Remediation

A fully nanoporous Fe-rich alloy, prepared by selective dissolution of melt-spun Fe_43.5Cu_56.5 ribbons, exhibits outstanding properties as a heterogeneous Fenton catalyst toward the degradation of methyl orange (MO) in aqueous solution. In addition, the ferromagnetic characteristics of this material enable its wireless manipulation toward specific locations within polluted wastewater. The influence of selective dissolution on the microstructure, sample morphology (surface and cross-section), elemental composition, and magnetic properties of the resulting nanoporous alloy is investigated. The dealloying procedure enhances the saturation magnetization and drastically increases the catalytic performance (i.e., the time required for full degradation of MO from the medium is reduced by a factor of approximately 2 by subjecting the Fe_43.5Cu_56.5 ribbons to prior dealloying). Remarkably, the effectiveness of this nanoporous material surpasses the results obtained by the homogeneous Fenton reaction using an equivalent concentration of Fe cations leached into the media from the nanoporous alloy. The different factors that promote the high catalytic activity are discussed. The outstanding catalytic activity, together with the simplicity of the synthetic procedure, makes this material very appealing for water remediation using advanced Fenton processes.

Preparation of copper doped magnetic porous carbon for removal of methylene blue by a heterogeneous Fenton-like reaction

High-specific-surface-area copper doped magnetic porous carbon (CuFe₂O₄/Cu@C) was fabricated by annealing iron, copper and 1,3,5-benzenetricarboxylic ([Cu/Fe]-BTC) metal–organic coordination polymers.

Nitrogen-doped diamond electrode shows high performance for electrochemical reduction of nitrobenzene

Effective electrode materials are critical to electrochemical reduction, which is a promising method to pre-treat anti-oxidative and bio-refractory wastewater. Herein, nitrogen-doped diamond (NDD) electrodes that possess superior electrocatalytic properties for reduction were fabricated by microwave-plasma-enhanced chemical vapor deposition technology. Nitrobenzene (NB) was chosen as the probe compound to investigate the material's electro-reduction activity. The effects of potential, electrolyte concentration and pH on NB reduction and aniline (AN) formation efficiencies were studied. NDD exhibited high electrocatalytic activity and selectivity for reduction of NB to AN. The NB removal efficiency and AN formation efficiency were 96.5% and 88.4% under optimal conditions, respectively; these values were 1.13 and 3.38 times higher than those of graphite electrodes. Coulombic efficiencies for NB removal and AN formation were 27.7% and 26.1%, respectively; these values were 4.70 and 16.6 times higher than those of graphite electrodes under identical conditions. LC-MS analysis revealed that the dominant reduction pathway on the NDD electrode was NB to phenylhydroxylamine (PHA) to AN.

Decoloration of orange G (OG) using electrochemical reduction

The electrocatalytic hydrogenation of Orange G is investigated using spectrophotometric experiments in laboratory cells. The working electrode consists of a thin grid coated with a layer of nickel in which fine particles of Raney nickel are dispersed. The optimal conditions of decoloration are as follows: basic pH, 0.05 g/L of dye concentration and 0.05 A of current density. Under these conditions, the OG decoloration efficiency reached 100% after only 1800 s of reaction. The observed values of the maximum absorbance in the spectra of the reaction mixture fitted well the polynomials of the fifth degree with respect to reaction time. The initial degradation rate of the dye is obtained easily as the differential coefficient of the functions at initial time. The degradation rate of the dye in the initial stage of the reaction is given by the first-order rate equation. The instantaneous current efficiency was calculated and the results indicated that cathodic reduction was the main contributor to the decoloration of OG. Direct cathodic reduction ofazo dyes allows decolorization of intensively coloured textile wastewater without addition of chemicals or formation of sludge. The technique is of particular interest for the treatment of concentrated dye baths. The effect of current density, dye concentration, and concentration and nature of the supporting electrolyte on the reduction of the Orange G are reported.

Electrochemical degradation of bromopyrogallol red in presence of cobalt ions

This paper summarizes the results of a degradation test of bromopyrogallol red (BPR) and textile dye wastewater (TDW) with a conventional three-electrode potentiostatic system in the presence of cobalt ions (electro Co(2+)-H2O2 system). H2O2, produced by the two-electron reduction of O2 at the cathode, would react with Co2+ ions, leading to the generation of hydroxyl radicals (*OH), which caused the degradation of the organic pollutants. With BPR degradation process as the reference point, the optimal conditions (pH=4.0 and the concentration of Co2+ is 0.1 mM) and the treating capacity of the system were both studied and compared with electro-Fenton's reagent. Many benefits were shown by the electro Co(2+)-H2O2 system, such as less metal ions consumption, more moderate conditions and faster reaction process. Treated with the system for 0.5 h, chemical oxygen demand and biological oxygen demand of TDW (pH=5.2), without pH adjustment, were reduced by 95.7% and 92.7%, respectively. These characteristics make the method another appropriate solution for wastewater treatment, especially for those contaminated by organic pollutants.

Degradation of dye solution by an activated carbon fiber electrode electrolysis system

Degradation of 29 dyes by means of an activated carbon fiber (ACF) electrode electrolysis system was performed successfully. Almost all dye solutions tested were decolorized effectively in this ACF electrolysis process. Internal relationships between treatment mechanisms and chemical composition of the dye have been discussed in this paper. Generally, it is shown that higher solubility leads to greater degradation in the process. Dyes with many -SO3-, COO-, -SO2NH2, -OH, hydrophilic groups, and azo linkages are susceptible to reduction. However, dyes with many -C=O, -NH-and aromatic groups, and hydrophobic groups, tend to be adsorbed. For dyes with -SO3-, COOH and -OH groups, if their molecules linearly spread in solution and have a significant tendency to form colloids by hydrogenous bonding, they also tend to be adsorbed and flocculated. Typical dynamic electrolysis of dye Acid Red B, Vat Blue BO and Disperse Red E-4B shows how the two major mechanisms, degradation and adsorption, act differently during treatment. Reduction occurs evenly during treatment. During the dominant adsorption process, after certain amount of iron is generated, colloid precipitation occurs and TOC and color are rapidly removed.