Amylosucrase from Neisseria polysaccharea: novel catalytic properties

Efficient biotransformation of naringenin to naringenin α-glucoside, a novel α-glucosidase inhibitor, by amylosucrase from Deinococcus wulumuquiensis

Amylosucrase (ASase) efficiently biosynthesizes α-glucoside using flavonoids as acceptor molecules and sucrose as a donor molecule. Here, ASase from Deinococcus wulumuqiensis (DwAS) biosynthesized more naringenin α-glucoside (NαG) with sucrose and naringenin as donor and acceptor molecules, respectively, than other ASases from Deinococcus sp. The biotransformation rate of DwAS to NαG was 21.3% compared to 7.1-16.2% for other ASases. Docking simulations showed that the active site of DwAS was more accessible to naringenin than those of others. The 217th valine in DwAS corresponded to the 221st isoleucine in Deinococcus geothermalis AS (DgAS), and the isoleucine possibly prevented naringenin from accessing the active site. The DwAS-V217I mutant had a significantly lower biosynthetic rate of NαG than DwAS. The kcat/Km value of DwAS with naringenin as the donor was significantly higher than that of DgAS and DwAS-V217I. In addition, NαG inhibited human intestinal α-glucosidase more efficiently than naringenin.

Insight to starch retrogradation through fine structure models: A review

The retrogradation of starch is crucial for the texture and nutritional value of starchy foods products. There is mounting evidence highlighting the significant impact of starch's fine structures on starch retrogradation. Because of the complexity of starch fine structure, it is a formidable challenge to study the structure-property relationship of starch retrogradation. Several models have been proposed over the years to facilitate understanding of starch structure. In this review, from the perspective of starch models, the intricate structure-property relationship is sorted into the correlation between different types of structural parameters and starch retrogradation performance. Amylopectin B chains with DP 24-36 and DP ≥36 exhibit a higher tendency to form ordered crystalline structures, which promotes starch retrogradation. The chains with DP 6-12 mainly inhibit starch retrogradation. Based on the building block backbone model, a longer inter-block chain length (IB-CL) enhances the realignment and reordering of starch. The mathematical parameterization model reveals a positive correlation between amylopectin medium chains, amylose short chains, and amylose long chains with starch retrogradation. The review is structured according to starch models; this contributes to a clear and comprehensive elucidation of the structure-property relationship, thereby providing valuable references for the selection and utilization of starch.

Bottom-Up Synthesized Glucan Materials: Opportunities from Applied Biocatalysis

Linear d-glucans are natural polysaccharides of simple chemical structure. They are comprised of d-glucosyl units linked by a single type of glycosidic bond. Noncovalent interactions within, and between, the d-glucan chains give rise to a broad variety of macromolecular nanostructures that can assemble into crystalline-organized materials of tunable morphology. Structure design and functionalization of d-glucans for diverse material applications largely relies on top-down processing and chemical derivatization of naturally derived starting materials. The top-down approach encounters critical limitations in efficiency, selectivity, and flexibility. Bottom-up approaches of d-glucan synthesis offer different, and often more precise, ways of polymer structure control and provide means of functional diversification widely inaccessible to top-down routes of polysaccharide material processing. Here the natural and engineered enzymes (glycosyltransferases, glycoside hydrolases and phosphorylases, glycosynthases) for d-glucan polymerization are described and the use of applied biocatalysis for the bottom-up assembly of specific d-glucan structures is shown. Advanced material applications of the resulting polymeric products are further shown and their important role in the development of sustainable macromolecular materials in a bio-based circular economy is discussed.

Characterization of a unique pH-dependent amylosucrase from Deinococcus cellulosilyticus

The amylosucrase (ASase, EC 2.4.1.4) utilizes sucrose as the sole substrate to catalyze multifunctional reactions. It can naturally synthesize α-1,4-linked glucans such as amylose as well as sucrose isomers with more favorable properties than sucrose with a lower intestinal digestibility and non-cariogenic properties. The amino acid sequence of the asase gene from Deinococcus cellulosilyticus (DceAS) exhibits low homology with those of other ASases from other Deinococcus species. In this study, we cloned and expressed DceAS and demonstrated its high activity at pH 6 and pH 8 and maintained stability. It showed higher polymerization activity at pH 6 than at pH 8, but similar isomerization activity and produced more turanose and trehalulose at pH 6 than at pH 8 and produced more isomaltulose at pH 8. Furthermore, the molecular weight of DceAS was 226.6 kDa at pH 6 and 145.5 kDa at pH 8, indicating that it existed as a trimer and dimer, respectively under those conditions. Additionally, circular dichroism spectra showed that the DceAS secondary structure was different at pH 6 and pH 8. These differences in reaction products at different pHs can be harnessed to naturally produce sucrose alternatives that are more beneficial to human health.

Architecture, Function, Regulation, and Evolution of α-Glucans Metabolic Enzymes in Prokaryotes

Bacteria have acquired sophisticated mechanisms for assembling and disassembling polysaccharides of different chemistry. α-d-Glucose homopolysaccharides, so-called α-glucans, are the most widespread polymers in nature being key components of microorganisms. Glycogen functions as an intracellular energy storage while some bacteria also produce extracellular assorted α-glucans. The classical bacterial glycogen metabolic pathway comprises the action of ADP-glucose pyrophosphorylase and glycogen synthase, whereas extracellular α-glucans are mostly related to peripheral enzymes dependent on sucrose. An alternative pathway of glycogen biosynthesis, operating via a maltose 1-phosphate polymerizing enzyme, displays an essential wiring with the trehalose metabolism to interconvert disaccharides into polysaccharides. Furthermore, some bacteria show a connection of intracellular glycogen metabolism with the genesis of extracellular capsular α-glucans, revealing a relationship between the storage and structural function of these compounds. Altogether, the current picture shows that bacteria have evolved an intricate α-glucan metabolism that ultimately relies on the evolution of a specific enzymatic machinery. The structural landscape of these enzymes exposes a limited number of core catalytic folds handling many different chemical reactions. In this Review, we present a rationale to explain how the chemical diversity of α-glucans emerged from these systems, highlighting the underlying structural evolution of the enzymes driving α-glucan bacterial metabolism.

Assessing Amylose Content with Iodine and Con A Methods, In Vivo Digestion Profile, and Thermal Properties of Amylosucrase-Treated Waxy Corn Starch

In this study, waxy corn starch was modified with 230 U or 460 U of amylosucrase (AS) from Neisseria polysaccharea (NP) to elongate the glucan. The amylose content of the AS-modified starches was determined using iodine and concanavalin A (Con A) methods, and their in vivo digestion, thermal, swelling, and pasting properties were evaluated. The amylose content of AS-treated starches was not significantly different (p > 0.05) when using the Con A method but was significantly higher than that of non-AS-treated samples when using the iodine method. In vivo, rats fed AS-treated starch had significantly lower blood glucose levels at 15 min than other rats; rats fed 460 U AS had lower blood glucose levels at 30 and 60 min than non-AS-treated rats. DSC analysis revealed that AS-treated starches exhibited higher initial, melting, and completion temperatures. Minimal volume expansion was observed by swelling factor analysis, while a Rapid Visco Analyzer assessment revealed that they had higher pasting onset temperatures, lower peak viscosities, and no trough viscosity compared to native starch. The elongated glucans in AS-treated starch reinforced their crystalline structure and increased slowly digestible and enzyme-resistant starch content. Overall, AS-treated starch showed unique thermal properties and a reduced blood glucose index upon administration. This distinctive characteristic of NPAS-treated starch makes it a good candidate food or non-food material for cosmetic products, medical materials, and adhesives.

Characterization and applications of biomacromolecule structurally similar to glycogen as a dispersion aid and skin protection agent

Glycogen is a naturally occurring or metabolically synthesized biological macromolecule found in a wide range of living organisms, including animals, microorganisms, and even plants. However, naturally sourced glycogen poses challenges for industrial use. This study focused on a biological macromolecule referred to as glycogen-like particles (GLPs), detailing the production methods and biological properties of these particles. In vitro enzymatic production of GLPs was successfully achieved. GLPs synthesized through a simultaneous enzymatic reaction using sucrose had significant changes in their structure and functionality based on the branching enzyme (BE) to amylosucrase (ASase) ratio. As this ratio increased, the GLPs developed higher molecular weights and greater density, solubility, and branching degree while reducing size and turbidity. Structural changes in these enzymes were not observed beyond a critical BE/ASase ratio. Uniformly dispersed curcumin powder was generated in 50 % (w/v) aqueous GLP solution, and the GLPs were non-toxic to human skin keratinocytes at a concentration of 2.5 mg/mL. GLPs with lower branching inhibited tyrosinase activity and melanin synthesis, while those with more long chains displayed effective UV-blocking. By manipulating the BE/ASase ratio, GLPs were shown to display diverse chemical structures and physical characteristics, suggesting their potential application in the food and cosmetics industries.

Secretory expression of amylosucrase in Bacillus licheniformis through twin-arginine translocation pathway

Amylosucrase (EC 2.4.1.4) is a versatile enzyme with significant potential in biotechnology and food production. To facilitate its efficient preparation, a novel expression strategy was implemented in Bacillus licheniformis for the secretory expression of Neisseria polysaccharea amylosucrase (NpAS). The host strain B. licheniformis CBBD302 underwent genetic modification through the deletion of sacB, a gene responsible for encoding levansucrase that synthesizes extracellular levan from sucrose, resulting in a levan-deficient strain, B. licheniformis CBBD302B. Neisseria polysaccharea amylosucrase was successfully expressed in B. licheniformis CBBD302B using the highly efficient Sec-type signal peptide SamyL, but its extracellular translocation was unsuccessful. Consequently, the expression of NpAS via the twin-arginine translocation (TAT) pathway was investigated using the signal peptide SglmU. The study revealed that NpAS could be effectively translocated extracellularly through the TAT pathway, with the signal peptide SglmU facilitating the process. Remarkably, 62.81% of the total expressed activity was detected in the medium. This study marks the first successful secretory expression of NpAS in Bacillus species host cells, establishing a foundation for its future efficient production.

ONE-SENTENCE SUMMARY

Amylosucrase was secreted in Bacillus licheniformis via the twin-arginine translocation pathway.

Recent Progress in 1,2-cis glycosylation for Glucan Synthesis

Controlling the stereoselectivity of 1,2-cis glycosylation is one of the most challenging tasks in the chemical synthesis of glycans. There are various 1,2-cis glycosides in nature, such as α-glucoside and β-mannoside in glycoproteins, glycolipids, proteoglycans, microbial polysaccharides, and bioactive natural products. In the structure of polysaccharides such as α-glucan, 1,2-cis α-glucosides were found to be the major linkage between the glucopyranosides. Various regioisomeric linkages, 1→3, 1→4, and 1→6 for the backbone structure, and 1→2/3/4/6 for branching in the polysaccharide as well as in the oligosaccharides were identified. To achieve highly stereoselective 1,2-cis glycosylation, including α-glucosylation, a number of strategies using inter- and intra-molecular methodologies have been explored. Recently, Zn salt-mediated cis glycosylation has been developed and applied to the synthesis of various 1,2-cis linkages, such as α-glucoside and β-mannoside, via the 1,2-cis glycosylation pathway and β-galactoside 1,4/6-cis induction. Furthermore, the synthesis of various structures of α-glucans has been achieved using the recent progressive stereoselective 1,2-cis glycosylation reactions. In this review, recent advances in stereoselective 1,2-cis glycosylation, particularly focused on α-glucosylation, and their applications in the construction of linear and branched α-glucans are summarized.

Macromolecular α-glucans with α-1,3/α-1,4 branching structures produced using dual glycosyltransferases: Elucidation of physicochemical and slowly digestible properties

Amylosucrase from Neisseria polysaccharea (NpAS) produces the linear amylose-like α-glucans by the elongation property from sucrose, and 4,3-α-glucanotransferase from Lactobacillus fermentum NCC 2970 (4,3-αGT) newly synthesizes the α-1,3 linkages after cleaving the α-1,4 linkages by the glycosyltransferring property. This study focused on the synthesis of high molecular α-1,3/α-1,4-linked glucans by combining NpAS and 4,3-αGT and analyzed their structural and digestive properties. The enzymatically synthesized α-glucans have a molecular weight of >1.6 × 10⁷ g mol^-1, and the α-4,3 branching ratios on the structures increased as the amount of 4,3-αGT increased. The synthesized α-glucans were hydrolyzed to linear maltooligosaccharides and α-4,3 branched α-limit dextrins (α-LDx) by human pancreatic α-amylase, and the amounts of produced α-LDx were increased depending on the ratio of synthesized α-1,3 linkages. In addition, approximately 80 % of the synthesized products were partially hydrolyzed by mammalian α-glucosidases, and the glucose generation rates decelerated as the amounts of α-1,3 linkages increased. In conclusion, new types of α-glucans with α-1,4 and α-1,3 linkages were successfully synthesized by a dual enzyme reaction. These can be utilized as slowly digestible and prebiotic ingredients in the gastrointestinal tract due to their novel linkage patterns and high molecular weights.

Designing starch derivatives with desired structures and functional properties via rearrangements of glycosidic linkages by starch-active transglycosylases

Modification of starch by transglycosylases from glycoside hydrolase families has attracted much attention recently; these enzymes can produce starch derivatives with novel properties, i.e. processability and functionality, employing highly efficient and safe methods. Starch-active transglycosylases cleave starches and transfer linear fragments to acceptors introducing α-1,4 and/or linear/branched α-1,6 glucosidic linkages, resulting in starch derivatives with excellent properties such as complexing and resistance to digestion characteristics, and also may be endowed with new properties such as thermo-reversible gel formation. This review summarizes the effects of variations in glycosidic linkage composition on structure and properties of modified starches. Starch-active transglycosylases are classified into 4 groups that form compounds: (1) in cyclic with α-1,4 glucosidic linkages, (2) with linear chains of α-1,4 glucosidic linkages, (3) with branched α-1,6 glucosidic linkages, and (4) with linear chains of α-1,6 glucosidic linkages. We discuss potential processability and functionality of starch derivatives with different linkage combinations and structures. The changes in properties caused by rearrangements of glycosidic linkages provide guidance for design of starch derivatives with desired structures and properties, which promotes the development of new starch products and starch processing for the food industry.

Identification and characterization of a novel high-activity amylosucrase from Salinispirillum sp. LH10-3-1

In this study, a novel high-activity amylosucrase from Salinispirillum sp. LH10-3-1 (SaAS) was identified and characterized. The recombinant enzyme was determined as a monomer with a molecular mass of 75 kDa. SaAS protein exhibited the maximum total and polymerization activities at pH 9.0 and maximum hydrolysis activity at pH 8.0. The optimum temperature for total, polymerization, and hydrolysis activities were 40, 40, and 45 °C, respectively. Under the optimal pH and temperature, SaAS had a specific activity of 108.2 U/mg. SaAS also showed excellent salt tolerance and could retain 77.4% of its original total activity at 4.0 M NaCl. The addition of Mg²⁺, Ba²⁺, and Ca²⁺ enhanced the total activity of SaAS. When the conversion of 0.1 M and 1.0 M sucrose was catalyzed at pH 9.0 and 40 °C for 24 h, the ratios of hydrolysis, polymerization, and isomerization reactions were 11.9:77.4:10.7 and 15.3:53.5:31.2, respectively. The α-arbutin yield of 60.3% was achieved from 20 mM sucrose and 5 mM hydroquinone catalyzed by SaAS. KEY POINTS: • A novel amylosucrase from Salinispirillum sp. LH10-3-1 (SaAS) was characterized. • SaAS has the highest specific enzyme activity among all known amylosucrase. • SaAS has hydrolysis, polymerization, isomerization, and glucosyltransferase activities.

Cyanobacteria as cell factories for the photosynthetic production of sucrose

Biofuels and other biologically manufactured sustainable goods are growing in popularity and demand. Carbohydrate feedstocks required for industrial fermentation processes have traditionally been supplied by plant biomass, but the large quantities required to produce replacement commodity products may prevent the long-term feasibility of this approach without alternative strategies to produce sugar feedstocks. Cyanobacteria are under consideration as potential candidates for sustainable production of carbohydrate feedstocks, with potentially lower land and water requirements relative to plants. Several cyanobacterial strains have been genetically engineered to export significant quantities of sugars, especially sucrose. Sucrose is not only naturally synthesized and accumulated by cyanobacteria as a compatible solute to tolerate high salt environments, but also an easily fermentable disaccharide used by many heterotrophic bacteria as a carbon source. In this review, we provide a comprehensive summary of the current knowledge of the endogenous cyanobacterial sucrose synthesis and degradation pathways. We also summarize genetic modifications that have been found to increase sucrose production and secretion. Finally, we consider the current state of synthetic microbial consortia that rely on sugar-secreting cyanobacterial strains, which are co-cultivated alongside heterotrophic microbes able to directly convert the sugars into higher-value compounds (e.g., polyhydroxybutyrates, 3-hydroxypropionic acid, or dyes) in a single-pot reaction. We summarize recent advances reported in such cyanobacteria/heterotroph co-cultivation strategies and provide a perspective on future developments that are likely required to realize their bioindustrial potential.

Glucosylation mechanism of resveratrol through the mutant Q345F sucrose phosphorylase from the organism Bifidobacterium adolescentis: a computational study

Mainly due to their great antioxidant, anti-inflammatory and anticancer capacities, natural polyphenolic compounds have many properties with important applications in the food, cosmetic and pharmaceutical industries. Unfortunately, these molecules have very low water solubility and bioavailability. Glucosylation of polyphenols is an excellent alternative to overcome these drawbacks. Specifically, for the natural polyphenol resveratrol this process is very inefficiently performed by the native enzyme sucrose phosphorylase (BaSP) from the organism Bifidobacterium adolescentis (4%). However, the Q345F point mutation of the sucrose phosphorylase (BaSP Q345F) has been shown to achieve 97% monoglucosylation for the same substrate and the mechanism is still unknown. This report presents an analysis of MD simulations performed with the BaSP Q345F and BaSP systems in complex with resveratrol monoglucoside, followed by a study of the transglucosylation reaction of the mutant enzyme BaSP Q345F with resveratrol through the QM/MM hybrid method. With respect to the MD simulations, both protein structures showed greater similarity to the phosphate-binding conformation, and a larger active site and conformational changes in certain structures were found for the mutant system compared with the native enzyme; all this is in agreement with experimental data. With regard to the QM/MM calculations, the structure of an oxocarbenium ion-like transition state and the minimum energy adiabatic path (MEP) that connects the reactants with the products were obtained with a 20.3 kcal mol^-1 energy barrier, which fits within the known experimental range for this type of enzyme. Finally, the analyses performed along the MEP suggest a concerted but asynchronous mechanism. In particular, they show that the interactions involving the residues of the catalytic triad (Asp¹⁹², Glu²³², and Asp²⁹⁰) together with two water molecules at the active site strongly contribute to the stabilization of the transition state. The understanding of this glucosylation mechanism of the polyphenol resveratrol carried out by the mutant sucrose phosphorylase enzyme presented in this work could serve as the basis for subsequent studies on related carbohydrate-active enzymes.

A unique biochemical reaction pathway towards trehalulose synthesis by an amylosucrase isolated from Deinococcus deserti

The aim of this study was to establish an efficient bioprocess for the synthesis of trehalulose as a novel sweetener. This disaccharide has 70% of the sweetness of sucrose and bioactive properties such as anti-cariogenicity and anti-oxidizing activity. In this study, amylosucrase from the Deinococcus deserti (DdAS) gene was expressed and purified. When DdAS was reacted with 2M sucrose at 35 °C for 120h, the yield ratio of trehalulose to turanose was approximately 2:1. The trehalulose yield increased when extrinsic fructose was added. Under optimum conditions for trehalulose synthesis, the yield reached 36% (246g/L, sucrose basis) starting with 2M sucrose + 0.75M fructose and showed the highest trehalulose productivity (1.94g/L/h). As a result, a novel amylosucrase that synthesized trehalulose as the major product was developed, in contrast to other studied amylosucrase-type enzymes. DdAS could be utilized industrially in a bioprocess for producing trehalulose as a functional sucrose alternative.

Effect of highly branched α-glucans synthesized by dual glycosyltransferases on the glucose release rate

Increasing α-1,6 linkages in starch molecules generates a large amount of α-limit dextrins (α-LDx) during α-amylolysis, which decelerate the release of glucose at the intestinal α-glucosidase level. This study synthesized highly branched α-glucans from sucrose using Neisseria polysaccharea amylosucrase and Rhodothermus obamensis glycogen branching enzyme to enhance those of slowly digestible property. The synthesized α-glucans (Mw: 1.7-4.9 × 10⁷ g mol^-1) were mainly composed of α-1,4 linkages and large proportions of α-1,6 linkages (7.5%-9.9%). After treating the enzymatically synthesized α-glucans with the human α-amylase, the quantity of branched α-LDx (36.2%-46.7%) observed was higher than that for amylopectin (26.8%) and oyster glycogen (29.1%). When the synthetic α-glucans were hydrolyzed by mammalin α-glucosidases, the glucose generation rate decreased because the amount of embedded branched α-LDx increased. Therefore, the macro-sized branched α-glucans with high α-LDx has the potential to be used as slowly digestible material to attenuate postprandial glycemic response.

Differentiated structure of synthetic glycogen-like particle by the combined action of glycogen branching enzymes and amylosucrase

Glycogen-like particles (GLPs) were built up from sucrose by applying de novo one-pot enzymatic process of amylosucrase (ASase; 6 U·mL^-1) and glycogen branching enzymes (GBEs; 0.001 and 0.005 U·mL^-1). Due to different chain-length transferring patterns of GBEs, structurally differentiated GLPs were synthesized. Yields of GLPs synthesized at pH 7.0 and 30 °C were improved by increasing the GBE/ASase ratio. Branching degrees of GLPs obviously was increased along with the ratio of GBEs, of which result was directly supported by shortened branch-chain length with greater GBE activity. Long branch chains seemed to play as efficient acceptor molecules to bind newly transferred branch chains especially at lower ratio of GBE/ASase, resulting in greater molecular weight and size of GLP with higher proportion of them. Molecular weight, size, and density of GLPs were ranged from 7.37 × 10⁵ to 1.94 × 10⁸ g·mol^-1, from 23.70 to 52.65 nm, and from 7.99 to 374.32 g·mol^-1·nm^-3, respectively. By increasing GBE/ASase ratio, more compact GLP architecture was fabricated due to increased weight and reduced size with exception of a unique GBE. GLPs were efficiently synthesized by two different glycosyltransferases, and their chemical structures were controllable by source and ratio of GBEs due to their different branch-chain transferring specificity.

Selective enzymatic α-1,6- monoglucosylation of mogroside IIIE for the bio-creation of α-siamenoside I, a potential high-intensity sweetener

A new compound, α-siamenoside I (α-SI), with a glucose unit selectively bound to the 6-hydroxyl group of the 24-O-β-glucosyl moiety of mogroside IIIE by α-1,6-glucosidic bond, was bio-created by two screened cyclodextrin glycosyltransferases with a maximum yield of 59.3%. Compared to mogroside IIIE, α-SI showed a significantly increased sweetness intensity (508 times sweeter than 5% sucrose), which is superior to siamenoside I (SI), the sweetest triterpenoid saponin isolated from Siraitia grosvenorii to date. Sensory evaluation showed that the taste quality of α-SI also was obviously better than mogroside IIIE. In addition to α-SI possessing a good stability similar to that of SI, it also did not cause a significant decrease in cell viability at a concentration of 200 μg/mL and had a negative influence on islets function at 1 μM. All of these preliminarily results pave the way for promoting α-SI as a potential low-calorie sweetener.

Physicochemical properties of turanose and its potential applications as a sucrose substitute

Among the structural isomers of sucrose, turanose has been considered as one of good candidates as novel sweetener due to its mild taste, low calorie, and anti-cariogenicity. Here, various physicochemical properties of turanose, such as solubility, temperature and pH stabilities, viscosity, non-enzymatic browning reaction, and dynamic vapor sorption, were investigated by comparing them to those of other commercial sugars. Turanose did not significantly hydrolyze through the simulated digestion tract overall but in the artificial small intestinal environment specifically, turanose degraded by only 18% when sucrose was hydrolyzed by 36% after 4 h. In addition, physicochemical properties of turanose confirmed that it had a potential to replace sucrose due to similar or better product qualities as a food ingredient than other types of sugars with similar chemical structure. Thus, our study suggests that turanose can be applied as a functional sweetener or bulking agent in food processing.

The Influence of Starch Modification with Amylosucrase Treatment on Morphological Features

Amylosucrase (AS) is a starch-modifying enzyme from Neisseria polysaccharea used to produce low-glycemic starches such as slowly digestible starch (SDS) and resistant starch (RS). The morphology of native, control, and AS-modified waxy corn starches (230 and 460 U) was examined using a particle size analyzer and field-emission scanning electron microscopy (FE-SEM). AS modification of the starch elongated the glucose and resulted in higher SDS and RS contents. The mean particle sizes of the control, 230 U-AS-, and 460 U-AS-treated starches were 56.6 µm, 128.0 µm, and 176.5 μm, respectively. The surface of the 460 U-AS-treated starch was entirely porous and coral-like, while the 230 U-AS-treated starch had a partial dense and flat surface which did not react with AS. FE-SEM of the granule cross section confirmed that the center contained a dense and flat region without any evidence of AS reaction to either of the AS-treated starches. It was assumed that the particle size and porous and sponge-like particle features might be related to the SDS and RS fractions.

Glycosyl hydrolase catalyzed glycosylation in unconventional media

The reversible hydrolytic property of glycosyl hydrolases (GHs) as well as their acceptance of aglycones other than water has provided the abilities of GHs in synthesizing glycosides. Together with desirable physiochemical properties of glycosides and their high commercial values, research interests have been aroused to investigate the synthetic other than the hydrolytic properties of GHs. On the other hand, just like the esterification processes catalyzed by lipases, GH synthetic effectiveness is strongly obstructed by water both thermodynamically and kinetically. Medium engineering by involving organic solvents can be a viable approach to alleviate the obstacles caused by water. However, as native hydrolyases function in water-enriched environments, most GHs display poor catalytic performance in the presence of organic solvents. Some GHs from thermophiles are more tolerant to organic solvents due to their robust folded structures with strong residue interactions. Other than native sources, immobilization, protein engineering, employment of surfactant, and lyophilization have been proved to enhance the GH stability from the native state, which opens up the possibilities for GHs to be employed in unconventional media as synthases. KEY POINTS: • Unconventional media enhance the synthetic ability but destabilize GHs. • Viable approaches are discussed to improve GH stability from the native state. • GHs robust in unconventional media can be valuable industrial synthases.

Versatile biotechnological applications of amylosucrase, a novel glucosyltransferase

Amylosucrase (AS; EC 2.4.1.4) is an enzyme that has great potential in the biotechnology and food industries, due to its multifunctional enzyme activities. It can synthesize α-1,4-glucans, like amylose, from sucrose as a sole substrate, but importantly, it can also utilize various other molecules as acceptors. In addition, AS produces sucrose isomers such as turanose and trehalulose. It also efficiently synthesizes modified starch with increased ratios of slow digestive starch and resistant starch, and glucosylated functional compounds with increased water solubility and stability. Furthermore, AS produces turnaose more efficiently than other carbohydrate-active enzymes. Amylose synthesized by AS forms microparticles and these can be utilized as biocompatible materials with various bio-applications, including drug delivery, chromatography, and bioanalytical sciences. This review not only compares the gene and enzyme characteristics of microbial AS, studied to date, but also focuses on the applications of AS in the biotechnology and food industries.

Biocatalytic Fabrication of α-Glucan-Coated Porous Starch Granules by Amylolytic and Glucan-Synthesizing Enzymes as a Target-Specific Delivery Carrier

In this study, we created biocatalytically coated porous starch granules (PSGs) using amylosucrase from Neisseria polysaccharea to apply them as an encapsulant for target-specific delivery. Field-emission scanning electron and confocal laser scanning microscopic images showed that the PSGs were completely concealed by the α-glucan coating layer. This carbohydrate-based encapsulant displayed higher amount of resistant glucan contents due to the elongated chains of the glucan coating, resulting in lower digestibility of these PSGs in simulated digestive fluid systems. Among the various PSGs evaluated, the highest loading efficiency for the bioactive molecule crocin was observed with the β-amylase-induced PSGs (β-PSGs) that had the smallest nanosize pores. Furthermore, α-glucan-coated β-PSGs showed the highest capacity to preserve the loaded crocin when incubated in simulated digestive fluids. This suggests that the α-glucan-coated β-PSGs can potentially be used for the delayed release of the core material in the upper region of the gastrointestinal tract. Therefore, this system can be potentially utilized as an effective carrier for colon-specific delivery, and the release of the bioactive compound can be triggered by beneficial intestinal microbiota.

Sucrose isomers as alternative sweeteners: properties, production, and applications

In the daily diet, sweeteners play an indispensable role. Among them, sucrose, a widely occurring disaccharide in nature, is a commonly used sweetener. However, the intake of sucrose can cause a rapid increase in blood glucose, which leads to a number of health problems. Therefore, there is an urgent need for possible alternatives to sucrose. Currently, four naturally occurring sucrose isomers, trehalulose, turanose, leucrose, and isomaltulose are considered to be possible alternatives to sucrose due to their suitable sweetness, potential physiological benefits, and feasible production processes. This review covers the properties of these alternative sweeteners, including their structure, sweetness, hydrolysis rate, toxicology, and cariogenicity, and exhibits their potential applications in chronic diseases management, anti-inflammatory supplement, prebiotic dietary supplement, and stabilizing agent. The biosynthesis of these sucrose isomers using carbohydrate-active enzymes and their industrial production processes are also systematically summarized.

Characterization of a novel amylosucrase gene from the metagenome of a thermal aquatic habitat, and its use in turanose production from sucrose biomass

Turanose is a natural isomer of sucrose. It is an emerging functional sweetener of the next generation. Turanose is catalytically synthesized from the sucrose biomass by employing amylosucrase enzyme. In this study, a novel gene encoding amylosucrase (As_met) has been identified from the metagenome of a thermal aquatic habitat. As_met exhibits 37-55% identity at the protein level with the known amylosucrases characterized till date. As_met was cloned and expressed in Escherichia coli, followed by protein purification, and characterization. As_met protein exhibited the maximum total activity at 9.0 pH and 60 °C temperature, whereas, 8.0 pH and 50 °C temperature were found optimum for transglycosylation activity. As_met showed fairly high thermal tolerance at 50 °C. The conjugation of As_met protein with functionalized iron nanoparticles significantly improved its thermal tolerance, showing hardly any loss in the enzyme's activity even after 72 h of heat (50 °C) exposure. The turanose yield of about 47% was achieved from 1.5 M sucrose, containing 0.5 M fructose in the reaction. Turanose was purified (˜95%) via a bio-physical process, and characterized by TLC, HPLC, and NMR. The novel amylosucrase gene was demonstrated to be a potential candidate for turanose production, utilizing various sucrose containing feedstocks.

Complexation of Amylosucrase-Modified Waxy Corn Starch with Fatty Acids: Determination of Their Physicochemical Properties and Digestibilities

In this study, starch-lipid complexes were prepared using normal corn starch (NC) and amylosucrase-modified waxy corn starch (ASWC) with myristic acid (C14:0) and palmitic acid (C16:0). The amylosucrase modification elongated branch chains in waxy corn starch leading to an increase of apparent amylose content (29.7%) similar to that of NC (29.0%). The X-ray diffraction of starch-lipid complexes revealed a V-type pattern, a clear indication of complex formation. The ability of the ASWC to complex with fatty acids was greater than that of NC. Interestingly, the changes in relative crystallinity, thermal parameters, and digestion properties according to the complexation showed opposite patterns in NC and ASWC. This study found that the structure of ASWC contributes to the formation of starch-fatty acid complexes and suggested that the ASWC can be preferred over NC in a delivery system. PRACTICAL APPLICATION: Amylopectin has been considered to be incapable of forming complexes with fatty acids due to its short chain length and steric hindrance. Through this study, an appropriate enzymatic modification of the molecular structures of waxy starches could make a complexation of waxy starches with fatty acids possible. The findings of this study suggest a promising perspective for utilization of waxy starch as a carrier material of lipophilic molecules.

Conformational Itinerary of Sucrose During Hydrolysis by Retaining Amylosucrase

By means of QM(DFT)/MM metadynamics we have unraveled the hydrolytic reaction mechanism of Neisseria polysaccharea amylosucrase (NpAS), a member of GH13 family. Our results provide an atomistic picture of the active site reorganization along the catalytic double-displacement reaction, clarifying whether the glycosyl-enzyme reaction intermediate features an α-glucosyl unit in an undistorted ⁴C₁ conformation, as inferred from structural studies, or a distorted ¹S₃-like conformation, as expected from mechanistic analysis of glycoside hydrolases (GHs). We show that, even though the first step of the reaction (glycosylation) results in a ⁴C₁ conformation, the α-glucosyl unit undergoes an easy conformational change toward a distorted conformation as the active site preorganizes for the forthcoming reaction step (deglycosylation), in which an acceptor molecule, i.e., a water molecule for the hydrolytic reaction, performs a nucleophilic attack on the anomeric carbon. The two conformations (⁴C₁ ad E₃) can be viewed as two different states of the glycosyl-enzyme intermediate (GEI), but only the E₃ state is preactivated for catalysis. These results are consistent with the general conformational itinerary observed for α-glucosidases.

Physicochemical properties of partially α-glucan-coated normal corn starch formed by amylosucrase from Neisseria polysaccharea

Amylosucrase (AS) is a glycosyltransferase that produces linear α-1,4 glucans using sucrose as the sole substrate. In this study, for various applications, α-glucan-coated starch (α-GCS) was produced by AS (20 U/L_reactant) from Neisseria polysaccharea to improve the physicochemical properties of raw normal corn starch (NCS) by applying different reaction conditions (i.e., varying the substrate concentration, pH, and temperature). Field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) showed that raw NCS was successfully coated by α-glucan. Differential scanning calorimetry (DSC) and rapid viscosity analyses (RVA) of the α-GCS confirmed that the α-glucan coating decreased the degree of retrogradation. Notably, compared to raw NCS as a control, starch retrogradation was significantly (p < 0.05) decreased by 13.7% after five weeks. Therefore, the novel α-GCS can be applied as a functional material for controlled retrogradation in the starch-based food industry for shelf-life extension.

Study on Transglucosylation Properties of Amylosucrase from Xanthomonas campestris pv. Campestris and Its Application in the Production of α-Arbutin

α-Arbutin (4-hydroquinone-α-D-glucopyranoside), an effective skin-lightening agent due to its considerable inhibitory effect on human tyrosinase activity, is widely used in the pharmaceutical and cosmetic industries. Recently, α-arbutin was prepared through transglucosylation of hydroquinone using microbial glycosyltransferases as catalysts. However, the low yield and prolonged reaction time of the biotransformation process of α-arbutin production limited its industrial application. In this work, an amylosucrase (ASase) from Xanthomonas campestris pv. campestris str. ATCC 33913 (XcAS) was expressed efficiently in Escherichia coli JM109. The catalytic property of the purified XcAS for the synthesis of α-arbutin was tested. The recombinant strain was applied for highly efficient synthesis of α-arbutin using sucrose and hydroquinone as glucosyl donor and acceptor, respectively. By optimizing the biotransformation conditions and applying a fed-batch strategy, the final production yield and conversion rate of α-arbutin reached 60.9 g/L and 95.5%, respectively, which is the highest reported yield by engineered strains. Compared to the highest reported value (<1.4 g/L/h), our productivity (7.6 g/L/h) was improved more than five-fold. This work represents an efficient and rapid method for α-arbutin production with potential industrial applications.

Enzymatic synthesis of α-flavone glucoside via regioselective transglucosylation by amylosucrase from Deinococcus geothermalis

α-Flavone glycosides have beneficial properties for applications in the pharmaceutical, cosmetic, and food industries. However, their chemical syntheses are often limited by a low efficiency or scarcity of substrates. In this study, α-flavone glucosides were enzymatically synthesized by amylosucrase from Deinococcus geothermalis (DGAS) using sucrose and various flavones as a donor for glucosyl units and acceptors, respectively. Luteolin was the most effective acceptor in the transglucosylation reaction using DGAS among nine flavone materials (apigenin, chrysin, 6,7-dihydroxyflavone, homoorientin, 7-hydroxyflavone, isorhoifolin, luteolin, luteolin-3′,7-diglucoside, and orientin). The highest production yield of luteolin glucoside was 86%, with a 7:1 molar ratio of donor to acceptor molecules, in 50 mM Tris-HCl buffer (pH 7) at 37°C for 24 h using 2 U of DGAS. The synthesized luteolin glucoside was identified as luteolin-4′-O-α-D-glucopyranoside with a glucose molecule linked to the C-4′ position on the B-ring of luteolin via an α-glucosidic bond, as determined by ¹H and ¹³C nuclear magnetic resonance. This result clearly confirmed that the glucosylated luteolin was successfully synthesized by DGAS and it can be applied as a functional ingredient. Furthermore, this approach using DGAS has the potential to be utilized for the synthesis of various glucosylated products using different types of polyphenols to enhance their functionalities.

Sucrose-based biosynthetic process for chain-length-defined α-glucan and functional sweetener by Bifidobacterium amylosucrase

A unique thermostable amylosucrase from Bifidobacterium thermophilum was produced as a recombinant protein with the half-life of 577 h at 50 °C. By adding 1.0 M fructose, turanose yield was improved from 22.7% to 43.3% with 1.0 M sucrose, and from 23.7% to 39.4% with 1.5 M sucrose. Sucrose consumption rate was greatest at 55 °C, but the lowest amount of turanose was produced. Thus, turanose yield from sucrose biomass was inversely proportional to reaction temperature and was highly dependent on [fructose]. Meanwhile, insoluble α-glucan yield was clearly reduced as [fructose] increased. With 1.0 M fructose + 1.0 M sucrose, glucan byproduct yield significantly decreased from 29.4% to 1.1%. Molecular weights of linear glucans were almost identical among various [sucrose]s and were homogenous with very low polydispersity. This unique dual reaction patterns of amylosucrase enzyme would be very useful for massive productions of two different biomaterials simply by changing sucrose biomass concentration.

Amylosucrase as a transglucosylation tool: From molecular features to bioengineering applications

Amylosucrase (EC 2.4.1.4, ASase), an outstanding sucrose-utilizing transglucosylase in the glycoside hydrolase family 13, can produce glucans with only α-1,4 linkages. Generally, on account of a double-displacement mechanism, ASase can catalyze polymerization, isomerization, and hydrolysis reactions with sucrose as the sole substrate, and has transglycosylation capacity to attach glucose molecules from sucrose to extra glycosyl acceptors. Based on extensive enzymology research, this review presents the characteristics of various ASases, including their microbial metabolism, preparation, and enzymatic properties, and exhibits structure-based strategies in the improvement of activity, specificity, and thermostability. As a vital transglucosylation tool of producing sugars, carbohydrate-based bioactive compounds, and materials, the bioengineering applications of ASases are also systematically summarized.

Preparation and characterization of the inclusion complexes between amylosucrase-treated waxy starch and palmitic acid

Amylosucrase-treated waxy corn starch (AS) was produced to extend the chain length of amylopectin to a great extent in comparison to its native chain length. An amylopectin-palmitic acid (PA) complex was prepared by heat-treating (121°C) a starch/PA mixture and its subsequent further incubation (95°C, 24 h); moreover, its structure and digestibility were studied. Unmodified waxy starch could not complex at all, whereas elongation due to amylosucrase modification allowed amylopectin to form a complex with PA to a small extent. Complexation between AS and PA caused a decrease in relative crystallinity. The AS-PA complex displayed an endothermic peak representing type I inclusion complexes rather than type II complexes. The formation of complexes did not significantly affect the in vitro digestibility maintaining the low digestibility of AS resulting from extremely small amounts of complexes and the type of complex.