Phosphorylation of vimentin head domain inhibits interaction with the carboxyl-terminal end of alpha-helical rod domain studied by surface plasmon resonance measurements

Molecular Interactions Driving Intermediate Filament Assembly

Given the role of intermediate filaments (IFs) in normal cell physiology and scores of IF-linked diseases, the importance of understanding their molecular structure is beyond doubt. Research into the IF structure was initiated more than 30 years ago, and some important advances have been made. Using crystallography and other methods, the central coiled-coil domain of the elementary dimer and also the structural basis of the soluble tetramer formation have been studied to atomic precision. However, the molecular interactions driving later stages of the filament assembly are still not fully understood. For cytoplasmic IFs, much of the currently available insight is due to chemical cross-linking experiments that date back to the 1990s. This technique has since been radically improved, and several groups have utilized it recently to obtain data on lamin filament assembly. Here, we will summarize these findings and reflect on the remaining open questions and challenges of IF structure. We argue that, in addition to X-ray crystallography, chemical cross-linking and cryoelectron microscopy are the techniques that should enable major new advances in the field in the near future.

Characterization of an Intermediate Filament Protein from the Platyhelminth, Dugesia japonica

BACKGROUND

Intermediate Filaments (IFs) are major constituents of the cytoskeletal systems in animal cells.

OBJECTIVE

To gain insights into the structure-function relationship of invertebrate cytoplasmic IF proteins, we characterized an IF protein from the platyhelminth, Dugesia japonica, termed Dif-1.

METHODS

cDNA cloning, in situ hybridization, immunohistochemical analysis, and IF assembly experiments in vitro using recombinant Dif-1, were performed for protein characterization.

RESULTS

The structure deduced from the cDNA sequence showed that Djf-1 comprises 568 amino acids and has a tripartite domain structure (N-terminal head, central rod, and C-terminal tail) that is characteristic of IF proteins. Similar to nuclear IF lamins, Djf-1 contains an extra 42 residues in the coil 1b subdomain of the rod domain that is absent from vertebrate cytoplasmic IF proteins and a nuclear lamin-homology segment of approximately 105 residues in the tail domain; however, it contains no nuclear localization signal. In situ hybridization analysis showed that Djf-1 mRNA is specifically expressed in cells located within the marginal region encircling the worm body. Immunohistochemical analysis showed that Djf-1 protein forms cytoplasmic IFs located close to the microvilli of the cells. In vitro IF assembly experiments using recombinant proteins showed that Djf-1 alone polymerizes into IFs. Deletion of the extra 42 residues in the coil 1b subdomain resulted in the failure of IF formation.

CONCLUSION

Together with data from other histological studies, our results suggest that Djf- 1 is expressed specifically in anchor cells within the glandular adhesive organs of the worm and that Djf-1 IFs may play a role in protecting the cells from mechanical stress.

Lamin A molecular compression and sliding as mechanisms behind nucleoskeleton elasticity

Lamin A is a nuclear intermediate filament protein critical for nuclear architecture and mechanics and mutated in a wide range of human diseases. Yet little is known about the molecular architecture of lamins and mechanisms of their assembly. Here we use SILAC cross-linking mass spectrometry to determine interactions within lamin dimers and between dimers in higher-order polymers. We find evidence for a compression mechanism where coiled coils in the lamin A rod can slide onto each other to contract rod length, likely driven by a wide range of electrostatic interactions with the flexible linkers between coiled coils. Similar interactions occur with unstructured regions flanking the rod domain during oligomeric assembly. Mutations linked to human disease block these interactions, suggesting that this spring-like contraction can explain in part the dynamic mechanical stretch and flexibility properties of the lamin polymer and other intermediate filament networks.

Inhibition of PPARα attenuates vimentin phosphorylation on Ser-83 and collapse of vimentin filaments during exposure of rat Sertoli cells in vitro to DBP

Dibutyl phthalate (DBP) is a peroxisome proliferator which can lead to germ cell loss from Sertoli cells. Collapse of vimentin filaments occurs in Sertoli cells after DBP exposure. Peroxisome proliferator activated receptor α (PPARα) is a key receptor which could be activated by DBP. The role of PPARα in this process was investigated. Results showed that, PPARα was activated in DBP-exposed Sertoli cells, GW6471 inhibited the activity of PPARα, phosphorylation level of vimentin and concentration of soluble vimentin was higher in DBP-treated Sertoli cells than GW6471+DBP-treated cells. These results suggest that PPARα directly or indirectly mediated phosphorylation of vimentin on Ser 83, and PPARα may play an important role in regulating the reorganization of vimentin filaments during exposure of Sertoli cells to DBP.

Novel bacterial ADP-ribosylating toxins: structure and function

Bacterial ADP-ribosyltransferase toxins (bARTTs) transfer ADP-ribose to eukaryotic proteins to promote bacterial pathogenesis. In this Review, we use prototype bARTTs, such as diphtheria toxin and pertussis toxin, as references for the characterization of several new bARTTs from human, insect and plant pathogens, which were recently identified by bioinformatic analyses. Several of these toxins, including cholix toxin (ChxA) from Vibrio cholerae, SpyA from Streptococcus pyogenes, HopU1 from Pseudomonas syringae and the Tcc toxins from Photorhabdus luminescens, ADP-ribosylate novel substrates and have unique organizations, which distinguish them from the reference toxins. The characterization of these toxins increases our appreciation of the range of structural and functional properties that are possessed by bARTTs and their roles in bacterial pathogenesis.

Vimentin binding is critical for infection by the virulent strain of Japanese encephalitis virus

Japanese encephalitis virus (JEV), a mosquito-borne flavivirus, causes acute encephalitis with high mortality in humans. We used a pair of virulent (RP-9) and attenuated (RP-2ms) variants of JEV to pull down the cell surface molecules bound with JEV particle; their identities were revealed by LC-MS/MS analysis. One major protein bound with RP-9 and weakly with RP-2ms was identified as the intermediate filament protein vimentin. Infection of RP-9 but not that of RP-2ms was blocked by anti-vimentin antibodies and by recombinant-expressed vimentin proteins. Knockdown of vimentin expression reduced the levels of viral binding and viral production of RP-9, but not that of RP-2ms. The different vimentin dependency for JEV infection could be attributed to the major structural envelope protein, as the recombinant RP-9 with an E-E138K mutation became resistant to anti-vimentin blockage. Furthermore, RP-2ms mainly depended on cell surface glycosaminoglycans for viral binding and it became vimentin-dependent only when binding to glycosaminoglycans was blocked. Thus, we suggest that vimentin contributes to virulent JEV infection and might be a new target to intervene in this deadly infection.

Head and rod 1 interactions in vimentin: identification of contact sites, structure, and changes with phosphorylation using site-directed spin labeling and electron paramagnetic resonance

We have used site-directed spin labeling (SDSL) and electron paramagnetic resonance (EPR) to identify residues 17 and 137 as sites of interaction between the head domain and rod domain 1A of the intermediate filament protein vimentin. This interaction was maximal when compared with the spin labels placed at up- and downstream positions in both head and rod regions, indicating that residues 17 and 137 were the closest point of interaction in this region. SDSL EPR characterization of residues 120-145, which includes the site of head contact with rod 1A, reveals that this region exhibits the heptad repeat pattern indicative of alpha-helical coiled-coil structure, but that this heptad repeat pattern begins to decay near residue 139, suggesting a transition out of coiled-coil structure. By monitoring the spectra of spin labels placed at the 17 and 137 residues during in vitro assembly, we show that 17-137 interaction occurs early in the assembly process. We also explored the effect of phosphorylation on the 17-137 interaction and found that phosphorylation-induced changes affected the head-head interaction (17-17) in the dimer, without significantly influencing the rod-rod (137-137) and head-rod (17-137) interactions in the dimer. These data provide the first direct evidence for, and location of, head-rod interactions in assembled intermediate filaments, as well as direct evidence of coiled-coil structure in rod 1A. Finally, the data identify changes in the structure in this region following in vitro phosphorylation.

Identification of phosphorylation-induced changes in vimentin intermediate filaments by site-directed spin labeling and electron paramagnetic resonance

Phosphorylation drives the disassembly of the vimentin intermediate filament (IF) cytoskeleton at mitosis. Chromatographic analysis has suggested that phosphorylation produces a soluble vimentin tetramer, but little has been determined about the structural changes that are caused by phosphorylation or the structure of the resulting tetramer. In this study, site-directed spin labeling and electron paramagnetic resonance (SDSL-EPR) were used to examine the structural changes resulting from protein kinase A phosphorylation of vimentin IFs in vitro. EPR spectra suggest that the tetrameric species resulting from phosphorylation is the A11 configuration. EPR spectra also establish that the greatest degree of structural change was found in the linker 2 and the C-terminal half of the rod domain, despite the fact that most phosphorylation occurs in the N-terminal head domain. The phosphorylation-induced changes notably affected the proposed "trigger sequences" located in the linker 2 region, which have been hypothesized to mediate the induction of coiled-coil formation. These data are the first to document specific changes in IF structure resulting from a physiologic regulatory mechanism and provide further evidence, also generated by SDSL-EPR, that the linker regions play a key role in IF structure and regulation of assembly/disassembly.

Role of the aromatic residues in the near-amino terminal motif of vimentin in intermediate filament assembly in vitro

Type III and IV intermediate filament (IF) proteins share a conserved sequence motif of -Tyr-Arg-Arg-X-Phe- at the near-amino termini. To characterize significance of the aromatic residues in the motif, we prepared vimentin mutants in which Tyr-10 and Phe-14 are substituted with Asn and Ser (Vim[Y10N], Vim[F14S] and Vim[Y10N, F14S]), and examined assembly properties in vitro by electron microscopy and viscosity measurements. At 2 s after initiation of assembly reaction at pH 7.2 and 150 mM NaCl, all the vimentin mutants formed so-called unit-length filaments (ULFs) that were slightly larger than ULFs of wild-type vimentin. In following filament elongation, Vim[Y10N, F14S] and Vim[Y10N] performed longitudinal annealing of ULFs very rapidly and formed IFs within only 2.5 and 5 min, respectively, while Vim[F14S] and wild-type vimentin gave IFs by 40-60 min. The IFs of Vim[Y10N, F14S] and Vim[Y10N], however, tended to intertwine each other and formed bundles in parts of the specimens. The intertwinements decreased as the salt concentration decreased, and optimal salt concentration for the two mutants to form normal IFs was 50 mM. These results suggest that the aromatic residues, especially Tyr-10, in the motif have a role in controlling intermolecular interactions involved in IF assembly in vitro and suppress undesirable filament intertwinements at physiological ionic strength.

p38 MAPK-dependent shaping of the keratin cytoskeleton in cultured cells

Plasticity of the resilient keratin intermediate filament cytoskeleton is an important prerequisite for epithelial tissue homeostasis. Here, the contribution of stress-activated p38 MAPK to keratin network organization was examined in cultured cells. It was observed that phosphorylated p38 colocalized with keratin granules that were rapidly formed in response to orthovanadate. The same p38^p recruitment was noted during mitosis, in various stress situations and in cells producing mutant keratins. In all these situations keratin 8 became phosphorylated on S73, a well-known p38 target site. To demonstrate that p38-dependent keratin phosphorylation determines keratin organization, p38 activity was pharmacologically and genetically modulated: up-regulation induced keratin granule formation, whereas down-regulation prevented keratin filament network disassembly. Furthermore, transient p38 inhibition also inhibited keratin filament precursor formation and mutant keratin granule dissolution. Collectively, the rapid and reversible effects of p38 activity on keratin phosphorylation and organization in diverse physiological, stress, and pathological situations identify p38-dependent signalling as a major intermediate filament–regulating pathway.

Morphological analysis of glutaraldehyde-fixed vimentin intermediate filaments and assembly-intermediates by atomic force microscopy

Atomic force microscopy (AFM) was used to study the morphology of vimentin intermediate filaments (IFs) and their assembly intermediates. At each time after initiation of IF assembly in vitro of recombinant mouse vimentin, the sample was fixed with 0.1% glutaraldehyde and then applied to AFM analysis. When mature vimentin IFs were imaged in air on mica, they appeared to have a width of approximately 28 nm, a height of approximately 4 nm and a length of several micrometers. Taking into account the probe tip's distortion effect, the exact width was evaluated to be approximately 25 nm, suggesting that the filaments flatten on the substrate rather than be cylindrical with a diameter of approximately 10 nm. Vimentin IFs in air clearly demonstrated approximately 21-nm repeating patterns along the filament axis. The three-dimensional profiles of vimentin IFs indicated that the characteristic patterns were presented by repeating segments with a convex surface. The repeating patterns close to 21 nm were also observed by AFM analysis in a physiological solution condition, suggesting that the segments along the filaments are an intrinsic substructure of vimentin IFs. In the course of IF assembly, assembly intermediates were analyzed in air. Many short filaments with a full-width and an apparent length of approximately 78 nm (evaluated length approximately 69 nm) were observed immediately after initiation of the assembly reaction. Interestingly, the short full-width filaments appeared to be composed of the four segments. Further incubation enabled the short full-width filaments to anneal longitudinally into longer filaments with a distinct elongation step of approximately 40 nm, which corresponds to the length of the two segments. To explain these observations, we propose a vimentin IF formation model in which vimentin dimers are supercoiling around the filament axis.

Survey of the year 2001 commercial optical biosensor literature

We have assembled references of 700 articles published in 2001 that describe work performed using commercially available optical biosensors. To illustrate the technology's diversity, the citation list is divided into reviews, methods and specific applications, as well as instrument type. We noted marked improvements in the utilization of biosensors and the presentation of kinetic data over previous years. These advances reflect a maturing of the technology, which has become a standard method for characterizing biomolecular interactions.

Deletion Mutagenesis of the Amino-Terminal Head Domain of Vimentin Reveals Dispensability of Large Internal Regions for Intermediate Filament Assembly and Stability

Previous studies have shown that the non-alpha-helical head domain of vimentin is required for polymerization of intermediate filaments (IFs) and, furthermore, a nonapeptide highly conserved among type III IF subunit proteins at their extreme amino-terminus is essential for this process. Recombinant DNA technology was employed to produce specific vimentin deletion mutant proteins (for in vitro studies) or vimentin protein expression plasmids (for in vivo studies), which were used to identify other regions of the vimentin head domain important for polymerization. Various vimentin proteins lacking either residues 25-38, 44-95, or 40-95 polymerized into wild-type or largely normal IFs, both in vitro and in vivo. Vimentin proteins lacking residues 44-69 or 25-63 failed to form IFs in vitro, but assembled into IFs in vivo. Vimentin proteins lacking residues 25-68, 44-103, or 88-103 failed to form IFs in vitro or in vivo. Taken together with previous results, these data demonstrate that the middle of the vimentin non-alpha-helical head domain, which is known to be the site of nucleic acid binding, is completely dispensable for IF formation, whereas both ends of the vimentin non-alpha-helical head domain are required for IF formation. The simplest explanation for these results is that the middle of the vimentin non-alpha-helical head domain loops out, thereby permitting the juxtaposition of the ends of the head domain and their productive interaction with other protein domains (probably the C-terminus of the rod domain) during IF polymerization. The ability of some of the mutant proteins to form IFs in vivo, but not in vitro, suggests that as-yet-unknown cellular proteins may interact with and, in some cases, enable polymerization of IFs, even though they are not absolutely required for IF formation by wild-type vimentin.

Keratin binding to 14-3-3 proteins modulates keratin filaments and hepatocyte mitotic progression

Keratin polypeptides 8 and 18 (K8/18) are the major intermediate filament proteins of simple-type epithelia. K18 Ser-33 phosphorylation regulates its binding to 14-3-3 proteins during mitosis. We studied the significance of keratin binding to 14-3-3 in transgenic mice that overexpress wild-type or Ser-33-->Ala (S33A) K18. In S33A but not wild-type K18-overexpressing mice, pancreatic acinar cell keratin filaments retracted from the basal nuclear region and became apically concentrated. In contrast, K18 S33A had a minimal effect on hepatocyte keratin filament organization. Partial hepatectomy of K18-S33A-overexpressing mice did not affect liver regeneration but caused limited mitotic arrest, accumulation of abnormal mitotic figures, dramatic fragmentation of hepatocyte keratin filaments, with retention of a speckled 14-3-3zeta mitotic cell nuclear-staining pattern that usually becomes diffuse during mitosis. Hence, K18 Ser-33 phosphorylation regulates keratin filament organization in simple-type epithelia in vivo. Keratin binding to 14-3-3 may partially modulate hepatocyte mitotic progression, in association with nuclear redistribution of 14-3-3 proteins during mitosis.