Fluorimetric multiparameter cell assay at the single cell level fabricated by optical tweezers

Efficient improvement of the proliferation, differentiation, and anti-arthritic capacity of mesenchymal stem cells by simply culturing on the immobilized FGF2 derived peptide, 44-ERGVVSIKGV-53

INTRODUCTION

The stem cell microenvironment has been evidenced to robustly affect its biological functions and clinical grade. Natural or synthetic growth factors, especially, are essential for modulating stem cell proliferation, metabolism, and differentiation via the interaction with specific extracellular receptors. Fibroblast growth factor-2 (FGF-2) possesses pleiotropic functions in various tissues and organs. It interacts with the FGF receptor (FGFR) and activates FGFR signaling pathways, which involve numerous biological functions, such as angiogenesis, wound healing, cell proliferation, and differentiation.

OBJECTIVES

Here, we aim to explore the molecular functions, mode of action, and therapeutic activity of yet undetermined function, FGF-2-derived peptide, FP2 (44-ERGVVSIKGV-53) in promoting the proliferation, differentiation, and therapeutic application of human Wharton's jelly mesenchymal stem cells (hWJ-MSCs) in comparison to other test peptides, canofin1 (FP1), hexafin2 (FP3), and canofin3 (FP4) with known functions.

METHODS

The immobilization of test peptides that are fused with mussel adhesive proteins (MAP) on the culture plate was carried out via EDC/NHS chemistry. Cell Proliferation assay, colony-forming unit, western blotting analysis, gene expression analysis, RNA-Seq. analysis, osteogenic, and chondrogenic differentiation capacity were applied to test the activity of the test peptides. We additionally utilized three-dimensional (3D) structural analysis and artificial intelligence (AI)-based AlphaFold2 and CABS-dock programs for receptor interaction prediction of the peptide receptor. We also verified the in vivo therapeutic capacity of FP2-cultured hWJ-MSCs using an osteoarthritis mice model.

RESULTS

Culture of hWJ-MSC onto an FP2-immobilized culture plate showed a significant increase in cell proliferation (n = 3; *p < 0.05, **p < 0.01) and the colony-forming unit (n = 3; *p < 0.05, **p < 0.01) compared with the test peptides. FP2 showed a significantly upregulated phosphorylation of FRS2α and FGFR1 and activated the AKT and ERK signaling pathways (n = 3; *p < 0.05, **p < 0.01, ***p < 0.001). Interestingly, we detected efficient FP2 receptor binding that was predicted using AI-based tools. Treatment with an AKT inhibitor significantly abrogated the FP2-mediated enhancement of cell differentiation (n = 3; *p < 0.05, **p < 0.01, ***p < 0.001). Intra-articular injection of FP2-cultured MSCs significantly mitigated arthritis symptoms in an osteoarthritis mouse model, as shown through the functional tests (n = 10; *p < 0.05, **p < 0.01, ***p < 0.001, ****p < 0.0001), modulation of the expression level of the pro-inflammatory and anti-inflammatory genes, and improved osteochondral regeneration as demonstrated by tissue sections.

CONCLUSION

Our study identified the FGF-2-derived peptide FP2 as a promising candidate peptide to improve the therapeutic potential of hWJ-MSCs, especially in bone and cartilage regeneration.

Mussel Adhesive Protein as a Promising Alternative to Fibrin for Scaffold Fixation during Cartilage Repair Surgery

OBJECTIVE

Fibrin has been used as a standard material for scaffold fixation during cartilage repair surgery. Most of the commercially available fibrin preparations need an additional method for scaffold fixation, most often with sutures, thus damaging the surrounding healthy cartilage. There is therefore a need to find alternatives to this method. In our study, we have investigated the potential possibility to use mussel adhesive protein as such an alternative.

METHODS

In this study, hydrophobic plastic was coated with the mussel adhesive protein Mefp-1 as well as with other cell adhesives (poly-lysine, fibronectin, and collagen). Human keratinocytes and chondrocytes were seeded on these substrates at 37°C in culture medium, followed by analysis of attachment and proliferation by crystal violet staining and metabolic labelling. Performance of Mefp-1 and fibrin as tissue glues were estimated by tensional force resistance measurement of moist porcine dermis (as a correlate to scaffold) glued to dermis, cartilage, or bone at 37°C.

RESULTS

Mefp-1 supported maximal cell attachment at a coating density of approximately 1 µg/cm². This was at least as good as the other adhesives tested. In addition, it supported cell proliferation at least as good as regular tissue culture plastic over a 7-day period. Measurement of tensional force resistance showed that Mefp-1 performed equally well as fibrin when porcine dermis was glued to cartilage and bone at the same concentration. Separation of the moist tissues after 15-minute incubation required a force of approximately 1 N/cm² for both compounds.

CONCLUSIONS

Mefp-1 show properties that qualify it as a compound that potentially could replace fibrin as a tissue glue for scaffold fixation. Given the possibilities to modify this protein by bioengineering, it is likely that the properties can be further improved.

Automatic transportation of biological cells with a robot-tweezer manipulation system

The positioning of biological cells has become increasingly important in biomedical research such as drug discovery, cell-to-cell interaction, and tissue engineering. Significant demand for both accuracy and productivity in cell manipulation highlights the need for automated cell transportation with integrated robotics and micro/nano-manipulation technologies. Optical tweezers, which use highly focused low-power laser beams to trap and manipulate particles at the micro/nanoscale, can be treated as special robot ‘end-effectors’ to manipulate biological objects in a noninvasive way. In this paper, we propose to use a robot-tweezer manipulation system for automatic transportation of biological cells. A dynamics equation of the cell in an optical trap is analyzed. Closed-loop controllers are designed for positioning single cells as well as multiple cells. A synchronization control technology is utilized for multicell transportation with maintained cell pattern. Experiments are performed on transporting live cells to demonstrate the effectiveness of the proposed approach.

Single-cell immunosensors for protein detection

A single-cell detector is described that combines the natural signal amplification of whole-cell biosensors with the flexibility and specificity of immunological recognition. An immune cell that expresses receptors for the constant region of immunoglobulin G (IgG) is loaded with a Ca(2+)-indicating dye and with antibodies directed against the protein of interest. Introduction of a multivalent protein antigen causes cross-linking of the receptors, which results in a detectable increase in the concentration of cytosolic Ca(2+). Some immune cell lines respond to stimulation with oscillations in their cytosolic Ca(2+) levels that complicate their use as detectors. The human monocytic cell line U-937, when treated with the cytokine interferon-gamma, produces a large, short-lived Ca(2+) signal in response to cross-linking of its high-affinity IgG receptors. U-937 was therefore chosen for development as an immunity-based detector. Human and rabbit antibodies are found to effectively stimulate the cell, causing a prompt and transient response. The cell is able to respond to repeated stimulation, though the response diminishes during rapid stimulation. Ovalbumin can be detected in micromolar concentrations. Possible fundamental constraints on the size of a detectable analyte are discussed.

Torque-generating malaria-infected red blood cells in an optical trap

We have used optical tweezers to trap normal and Plasmodiuminfected red blood cells (iRBCs). Two different facets of the behavior of RBCs in infrared light fields emerge from our experiments. Firstly, while the optical field modifies both types of RBCs in the same fashion, by folding the original biconcave disk into a rod-like shape, iRBCs rotate with linearly polarized light whereas normal RBCs do not. Secondly, and in the context of known molecular motors, our measurements indicate that the torque of rotating iRBCs is up to three orders of magnitude larger.

Single-cell image analysis to assess ABC-transporter-mediated efflux in highly purified hematopoietic progenitors

BACKGROUND

Normal and malignant hematopoietic stem cells are characterized by their capacity to actively extrude fluorescent dyes. The contribution of different ATP-binding cassette (ABC) transporters to this phenomenon is largely unknown due to the small stem cell numbers limiting the use of standard methods to assess functional efflux.

METHODS

We used epifluorescence microscopy (EFM) in combination with single-cell image analysis to study ABC-transporter-mediated efflux in highly purified, viable, CD34+CD38- cells sorted on an adhesive biolayer. P-glycoprotein and multidrug-resistant protein (MRP)-mediated efflux were quantitated using fluorescent substrates (rhodamine-123 and calcein acetoxymethyl ester [calcein-AM]) and specific inhibitors (verapamil and probenecid, respectively).

RESULTS

The feasibility, sensitivity, and reproducibility of rhodamine-123 efflux quantitation using single-cell EFM was shown in cell lines and compared with standard flow cytometric assessment. P-glycoprotein-mediated transport was higher in CD34+CD38- cells than in more differentiated progenitors (mean efflux index = 2.24 +/- 0.35 and 1.14 +/- 0.11, respectively; P = 0.01). P-glycoprotein-mediated transport was the main determinant of the rhodamine "dull" phenotype of these cells. In addition, significant MRP-mediated efflux was demonstrated in CD34+CD38- and CD38+ cells (mean efflux index = 1.42 +/- 0.19 and 1.28 +/- 0.18, respectively).

CONCLUSION

The described method is a valuable tool for assessing ABC-transporter-mediated efflux in highly purified single cells. Both P-glycoprotein and MRP-mediated efflux are present in human CD34+CD38- hematopoietic stem cells.

Automated single-cell sorting system based on optical trapping

We provide a basis for automated single-cell sorting based on optical trapping and manipulation using human peripheral blood as a model system. A counterpropagating dual-beam optical-trapping configuration is shown theoretically and experimentally to be preferred due to a greater ability to manipulate cells in three dimensions. Theoretical analysis performed by simulating the propagation of rays through the region containing an erythrocyte (red blood cell) divided into numerous elements confirms experimental results showing that a trapped erythrocyte orients with its longest axis in the direction of propagation of the beam. The single-cell sorting system includes an image-processing system using thresholding, background subtraction, and edge-enhancement algorithms, which allows for the identification of single cells. Erythrocytes have been identified and manipulated into designated volumes using the automated dual-beam trap. Potential applications of automated single-cell sorting, including the incorporation of molecular biology techniques, are discussed.

Analysis of the behaviour of erythrocytes in an optical trapping system

We present a theoretical analysis of the behaviour of erythrocytes in an optical trapping system. We modeled erythrocyte behaviour in an optical trap by an algorithm which divided the cell surface into a large number of elements and recursively summed the force and torque on each element. We present a relationship between the torque and angle of orientation of the cell, showing that stable equilibrium orientations are at angles of 0 o , 180 o and 360 o and unstable equilibrium orientations are at 90 o and 270 o relative to the axis of beam propagation. This is consistent with our experimental observations and with results described in the literature. We also model behaviour of the erythrocyte during micromanipulation by calculating the net force on it. Such theoretical analysis is practical as it allows for the optimization of the optical parameters of a trapping system prior to performing a specific optical micromanipulation application, such as cell sorting or construction of a cell pattern for lab-on-a-chip applications.