Orientational behavior of phospholipid membranes with mastoparan studied by 31P solid state NMR

Use of isotropically tumbling bicelles to measure curvature induced by membrane components

Isotropically tumbling discoidal bicelles are a useful biophysical tool for the study of lipids and proteins by NMR, dynamic light scattering, and small-angle X-ray scattering. Isotropically tumbling bicelles present a low-curvature central region, typically enriched with DMPC in the lamellar state, and a highly curved detergent rim, typically composed of DHPC. In this report, we study the impact of the partitioning and induced curvature of a few molecules of a foreign lipid on the bicelle size, structure, and curvature. Previous approaches for studying curvature have focused on macroscopic and bulk properties of membrane curvature. In the approach presented here, we show that the conical shape of the DOPE lipid and the inverted-conical shape of the DPC lipid induce measurable curvature changes in the bicelle size. Bicelles with an average of 1.8 molecules of DOPE have marked increases in the size of bicelles, consistent with negative membrane curvature in the central region of the bicelle. With bicelle curvature models, radii of curvature on the order of -100 Å and below are measured, with a greater degree of curvature observed in the more pliable Lα state above the phase-transition temperature of DMPC. Bicelles with an average of 1.8 molecules of DPC are reduced in size, consistent with positive membrane curvature in the rim, and at higher temperatures, DPC is distributed in the central region to form mixed-micelle structures. We use translational and rotational diffusion measurements by NMR, size-exclusion chromatography, and structural models to quantitate changes in bicelle size, curvature, and lipid dynamics.

Biophysical studies of the interactions between the phage varphiKZ gp144 lytic transglycosylase and model membranes

The use of naturally occurring lytic bacteriophage proteins as specific antibacterial agents is a promising way to treat bacterial infections caused by antibiotic-resistant pathogens. The opportunity to develop bacterial resistance to these agents is minimized by their broad mechanism of action on bacterial membranes and peptidoglycan integrity. In the present study, we have investigated lipid interactions of the gp144 lytic transglycosylase from the Pseudomonas aeruginosa phage varphiKZ. Interactions with zwitterionic lipids characteristic of eukaryotic cells and with anionic lipids characteristic of bacterial cells were studied using fluorescence, solid-state nuclear magnetic resonance, Fourier transform infrared, circular dichroism, Langmuir monolayers, and Brewster angle microscopy (BAM). Gp144 interacted preferentially with anionic lipids, and the presence of gp144 in anionic model systems induced membrane disruption and lysis. Lipid domain formation in anionic membranes was observed by BAM. Gp144 did not induce disruption of zwitterionic membranes but caused an increase in rigidity of the lipid polar head group. However, gp144 interacted with zwitterionic and anionic lipids in a model membrane system containing both lipids. Finally, the gp144 secondary structure was not significantly modified upon lipid binding.

Triacontanol and jasmonic acid differentially modulate the lipid organization as evidenced by the fluorescent probe behavior and 31P nuclear magnetic resonance shifts in model membranes

Fluorescence resonance energy transfer (FRET), time-resolved fluorescence and anisotropy decays were determined in large unilamellar vesicles (LUVs) of egg phosphatidylcholine with the FRET pair N-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)-1,2-dipalmitoyl-sn-glycero-3-phospho-ethanolamine as donor and lissamine rhodamine B 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine as acceptor, using 2-ps pulses from a Ti:sapphire laser on LUVs with incorporated plant growth regulators: triacontanol (TRIA) and jasmonic acid (JA). FRET efficiency, energy transfer rate, rotation correlation time, microviscosity, and diffusion coefficient of lateral diffusion of lipids were calculated from these results. It was observed that TRIA and JA differentially modulated all parameters studied. The effect of JA in such modulations was always partially reversed by TRIA. Also, the generalized polarization of laurdan fluorescence indicated that JA enhances the degree of hydration in lipid bilayers to a larger extent than does TRIA. Solid-state (31)P magic-angle spinning nuclear magnetic resonance spectra of LUVs showed two chemical shifts, at 0.009 and -11.988 ppm, at low temperatures (20 degrees C), while at increasing temperatures (20-60 degrees C) only one (at -11.988 ppm) was prominent and the other (0.009 ppm) gradually became obscure. However, LUVs with TRIA exhibited only one of the shifts at 0.353 ppm even at lower temperatures and JA did not affect the chemical shifts.

Structural features of distinctin affecting peptide biological and biochemical properties

The antimicrobial peptide distinctin consists of two peptide chains linked by a disulfide bridge; it presents a peculiar fold in water resulting from noncovalent dimerization of two heterodimeric molecules. To investigate the contribution of each peptide chain and the S-S bond to distinctin biochemical properties, different monomeric and homodimeric peptide analogues were synthesized and comparatively evaluated with respect to the native molecule. Our experiments demonstrate that the simultaneous occurrence of both peptide chains and the disulfide bond is essential for the formation of the quaternary structure of distinctin in aqueous media, able to resist protease action. In contrast, distinctin and monomeric and homodimeric analogues exhibited comparable antimicrobial activities, suggesting only a partial contribution of the S-S bond to peptide killing effectiveness. Relative bactericidal properties paralleled liposome permeabilization results, definitively demonstrating that microbial membranes are the main target of distinctin activity. Various biophysical experiments performed in membrane-mimicking media, before and after peptide addition, provided information about peptide secondary structure, lipid bilayer organization, and lipid-peptide orientation with respect to membrane surface. These data were instrumental in the generation of putative models of peptide-lipid supramolecular pore complexes.

Investigating the interaction of saposin C with POPS and POPC phospholipids: a solid-state NMR spectroscopic study

The interaction of Saposin C (Sap C) with negatively charged phospholipids such as phosphatidylserine (PS) is essential for its biological function. In this study, Sap C (initially protonated in a weak acid) was inserted into multilamellar vesicles (MLVs) consisting of either 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-L-serine] (negatively charged, POPS) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (neutrally charged, POPC). The MLVs were then investigated using solid-state NMR spectroscopy under neutral pH (7.0) conditions. The (2)H and (31)P solid-state NMR spectroscopic data of Sap C-POPS and Sap C-POPC MLVs (prepared under the same conditions) were compared using the (2)H order parameter profiles of the POPC-d(31) or POPS-d(31) acyl chains as well as the (31)P chemical shift anisotropy width and (31)P T(1) relaxation times of the phospholipids headgroups. All those solid-state NMR spectroscopic approaches indicate that protonated Sap C disturbs the POPS bilayers and not the POPC lipid bilayers. These observations suggest for the first time that protonated Sap C inserts into PS bilayers and forms a stable complex with the lipids even after resuspension under neutral buffer conditions. Additionally, (31)P solid-state NMR spectroscopic studies of mechanically oriented phospholipids on glass plates were conducted and perturbation effect of Sap C on both POPS and POPC bilayers was compared. Unlike POPC bilayers, the data indicates that protonated Sap C (initially protonated in a weak acid) was unable to produce well-oriented POPS bilayers on glass plates at neutral pH. Conversely, unprotonated Sap C (initially dissolved in a neutral buffer) did not interact significantly with POPS phospholipids allowing them to produce well-oriented bilayers at neutral pH.

Biophysical studies of the interactions between 14-mer and 21-mer model amphipathic peptides and membranes: Insights on their modes of action

We have investigated the interactions between synthetic amphipathic peptides and zwitterionic model membranes. Peptides with 14 and 21 amino acids composed of leucines and phenylalanines modified by the addition of crown ethers have been synthesized. The 14-mer and 21-mer peptides both possess a helical amphipathic structure as revealed by circular dichroism. To shed light on their mechanism of membrane interaction, different complementary biophysical techniques have been used such as circular dichroism, fluorescence, membrane conductivity measurement and NMR spectroscopy. Results obtained by these different techniques show that the 14-mer peptide is a membrane perturbator that facilitate the leakage of species such as calcein and Na ions, while the 21-mer peptide acts as an ion channel. (31)P solid-state NMR experiments on multilamellar vesicles reveal that the dynamics and/or orientation of the polar headgroups are greatly affected by the presence of the peptides. Similar results have also been obtained in mechanically oriented DLPC and DMPC bilayers where different acyl chain lengths seem to play a role in the interaction. On the other hand, (2)H NMR experiments on multilamellar vesicles demonstrate that the acyl chain order is affected differently by the two peptides. Based on these studies, mechanisms of action are proposed for the 14-mer and 21-mer peptides with zwitterionic membranes.

Structure of tightly membrane-bound mastoparan-X, a G-protein-activating peptide, determined by solid-state NMR

The structure of mastoparan-X (MP-X), a G-protein activating peptide from wasp venom, in the state tightly bound to anionic phospholipid bilayers was determined by solid-state NMR spectroscopy. Carbon-13 and nitrogen-15 NMR signals of uniformly labeled MP-X were completely assigned by multidimensional intraresidue C-C, N-CalphaCbeta, and N-Calpha-C', and interresidue Calpha-CalphaCbeta, N-CalphaCbeta, and N-C'-Calpha correlation experiments. The backbone torsion angles were predicted from the chemical shifts of 13C', 13Calpha, 13Cbeta, and 15N signals with the aid of protein NMR database programs. In addition, two 13C-13C and three 13C-15N distances between backbone nuclei were precisely measured by rotational resonance and REDOR experiments, respectively. The backbone structure of MP-X was determined from the 26 dihedral angle restraints and five distances with an average root-mean-square deviation of 0.6 A. Peptide MP-X in the bilayer-bound state formed an amphiphilic alpha-helix for residues Trp3-Leu14 and adopted an extended conformation for Asn2. This membrane-bound conformation is discussed in relation to the peptide's activities to form pores in membranes and to activate G-proteins. This study demonstrates the power of multidimensional solid-state NMR of uniformly isotope-labeled molecules and distance measurements for determining the structures of peptides bound to lipid membranes.

Conditions affecting the re-alignment of the antimicrobial peptide PGLa in membranes as monitored by solid state 2H-NMR

The cationic antimicrobial peptide PGLa is electrostatically attracted to bacterial membranes, binds as an amphiphilic alpha-helix, and is thus able to permeabilize the lipid bilayer. Using solid state (2)H-NMR of non-perturbing Ala-d(3) labels on the peptide, we have characterized the helix alignment under a range of different conditions. Even at a very high peptide-to-lipid ratio (1:20) and in the presence of negatively charged lipids, there was no indication of a toroidal wormhole structure. Instead, PGLa re-aligns from a surface-bound S-state to an obliquely tilted T-state, which is presumably dimeric. An intermediate structure half-way between the S- and T-state was observed in fully hydrated multilamellar DMPC vesicles at 1:50, suggesting a fast exchange between the two states on the time scale of >50 kHz. We demonstrate that this equilibrium is shifted from the S- towards the T-state either upon (i) increasing the peptide concentration, (ii) adding negatively charged DMPG, or (iii) decreasing the level of hydration. The threshold concentration for re-alignment in DMPC is found to be between 1:200 and 1:100 in oriented samples at 96% humidity. In fully hydrated multilamellar DMPC vesicles, it shifts to an effective peptide-to-lipid ratio of 1:50 as some peptides are able to escape into the bulk water phase.

Solid-state NMR investigation of the selective disruption of lipid membranes by protegrin-1

The interaction of a beta-hairpin antimicrobial peptide, protegrin-1 (PG-1), with various lipid membranes is investigated by (31)P, (2)H, and (13)C solid-state NMR. Mixed lipid bilayers containing anionic lipids and cholesterol are used to mimic the bacterial and mammalian cell membranes, respectively. (31)P and (2)H spectra of macroscopically oriented samples show that PG-1 induces the formation of an isotropic phase in anionic bilayers containing phosphatidylglycerol. Two-dimensional (31)P exchange experiments indicate that these isotropic lipids are significantly separate from the residual oriented lamellar bilayers, ruling out toroidal pores as the cause for the isotropic signal. (1)H spin diffusion experiments show that PG-1 is not exclusively bound to the isotropic phase but is also present in the residual oriented lamellar bilayers. This dynamic and morphological heterogeneity of the anionic membranes induced by PG-1 is supported by the fact that (13)C T(2) relaxation times measured under cross polarization and direct polarization conditions differ significantly. In contrast to the anionic membrane, the zwitterionic phosphatidylcholine (PC) membrane does not form an isotropic phase in the presence of PG-1 but shows significant orientational disorder. The addition of cholesterol to the PC bilayer significantly reduces this orientational disorder. The (13)C T(2) relaxation times of the PC lipids in the presence of both cholesterol and PG-1 suggest that the peptide may decrease the dynamic heterogeneity of the cholesterol-containing membrane. The observed selective interaction of PG-1 with different lipid membranes is consistent with its biological function and may be caused by its strong cationic and amphipathic structure.

Investigating structural changes in the lipid bilayer upon insertion of the transmembrane domain of the membrane-bound protein phospholamban utilizing 31P and 2H solid-state NMR spectroscopy

Phospholamban (PLB) is a 52-amino acid integral membrane protein that regulates the flow of Ca(2+) ions in cardiac muscle cells. In the present study, the transmembrane domain of PLB (24-52) was incorporated into phospholipid bilayers prepared from 1-palmitoyl-2-oleoyl-sn-glycero-phosphocholine (POPC). Solid-state (31)P and (2)H NMR experiments were carried out to study the behavior of POPC bilayers in the presence of the hydrophobic peptide PLB at temperatures ranging from 30 degrees C to 60 degrees C. The PLB peptide concentration varied from 0 mol % to 6 mol % with respect to POPC. Solid-state (31)P NMR spectroscopy is a valuable technique to study the different phases formed by phospholipid membranes. (31)P NMR results suggest that the transmembrane protein phospholamban is incorporated successfully into the bilayer and the effects are observed in the lipid lamellar phase. Simulations of the (31)P NMR spectra were carried out to reveal the formation of different vesicle sizes upon PLB insertion. The bilayer vesicles fragmented into smaller sizes by increasing the concentration of PLB with respect to POPC. Finally, molecular order parameters (S(CD)) were calculated by performing (2)H solid-state NMR studies on deuterated POPC (sn-1 chain) phospholipid bilayers when the PLB peptide was inserted into the membrane.

Orientation and pore-forming mechanism of a scorpion pore-forming peptide bound to magnetically oriented lipid bilayers

The orientation and pore-forming mechanisms of pandinin 2 (pin2), an antimicrobial peptide isolated from venom of the African scorpion Pandinus imperator, bound to magnetically oriented lipid bilayers were examined by 31P and 13C solid-state, and 15N liquid-state NMR spectroscopy. 31P NMR measurements at various temperatures, under neutral and acidic conditions, showed that membrane lysis occurred only under acidic conditions, and at temperatures below the liquid crystal-gel phase transition of the lipid bilayers, after incubation for two days in the magnet. Differential scanning calorimetry measurements showed that pin2 induced negative curvature strain in lipid bilayers. The 13C chemical shift values of synthetic pin2 labeled at Gly3, Gly8, Leu12, Phe17, or Ser18 under static or slow magic-angle spinning conditions, indicate that pin2 penetrates the membrane with its average helical axis perpendicular to the membrane surface. Furthermore, amide H-D exchange experiments of 15N-Ala4, Gly8, and Ala9 triply-labeled pin2 suggest that this peptide forms oligomers and confirms that the N-terminal region creates membrane pores.

Pore formation by equinatoxin II, a eukaryotic protein toxin, occurs by induction of nonlamellar lipid structures

Pore formation in the target cell membranes is a common mechanism used by many toxins in order to kill cells. Among various described mechanisms, a toroidal pore concept was described recently in the course of action of small antimicrobial peptides. Here we provide evidence that such mechanism may be used also by larger toxins. Membrane-destabilizing effects of equinatoxin II, a sea anemone cytolysin, were studied by various biophysical techniques. 31P NMR showed an occurrence of an isotropic component when toxin was added to multilamellar vesicles and heated. This component was not observed with melittin, alpha-staphylococcal toxin, or myoglobin. It does not originate from isolated small lipid structures, since the size of the vesicles after the experiment was similar to the control without toxin. Electron microscopy shows occurrence of a honeycomb structure, previously observed only for some particular lipid mixtures. The analysis of FTIR spectra of the equinatoxin II-lipid complex showed lipid disordering that is consistent with isotropic component observed in NMR. Finally, the cation selectivity of the toxin-induced pores increased in the presence of negatively charged phosphatidic acid, indicating the presence of lipids in the conductive channel. The results are compatible with the toroidal pore concept that might be a general mechanism of pore formation for various membrane-interacting proteins or peptides.

Mechanism of lipid bilayer disruption by the human antimicrobial peptide, LL-37

LL-37 is an amphipathic, alpha-helical, antimicrobial peptide. (15)N chemical shift and (15)N dipolar-shift spectroscopy of site-specifically labeled LL-37 in oriented lipid bilayers indicate that the amphipathic helix is oriented parallel to the surface of the bilayer. This surface orientation is maintained in both anionic and zwitterionic bilayers and at different temperatures and peptide concentrations, ruling out a barrel-stave mechanism for bilayer disruption by LL-37. In contrast, electrostatic factors, the type of lipid, and the presence of cholesterol do affect the extent to which LL-37 perturbs the lipids in the bilayer as observed with (31)P NMR. The (31)P spectra also show that micelles or other small, rapidly tumbling membrane fragments are not formed in the presence of LL-37, excluding a detergent-like mechanism. LL-37 does increase the lamellar to inverted hexagonal phase transition temperature of both PE model lipid systems and Escherichia coli lipids, demonstrating that it induces positive curvature strain in these environments. These results support a toroidal pore mechanism of lipid bilayer disruption by LL-37.

An innovative procedure using a sublimable solid to align lipid bilayers for solid-state NMR studies

Uniaxially aligned phospholipid bilayers are often used as model membranes to obtain structural details of membrane-associated molecules, such as peptides, proteins, drugs, and cholesterol. Well-aligned bilayer samples can be difficult to prepare and no universal procedure has been reported that orients all combinations of membrane-embedded components. In this study, a new method for producing mechanically aligned phospholipid bilayer samples using naphthalene, a sublimable solid, was developed. Using (31)P-NMR spectroscopy, comparison of a conventional method of preparing mechanically aligned samples with the new naphthalene procedure found that the use of naphthalene significantly enhanced the alignment of 3:1 1-palmitoyl-2-oleoyl-phosphatidylethanolamine to 1-palmitoyl-2-oleoyl-phosphatidylglycerol. The utility of the naphthalene procedure is also demonstrated on bilayers of many different compositions, including bilayers containing peptides such as pardaxin and gramicidin. These results show that the naphthalene procedure is a generally applicable method for producing mechanically aligned samples for use in NMR spectroscopy. The increase in bilayer alignment implies that this procedure will improve the sensitivity of solid-state NMR experiments, in particular those techniques that detect low-sensitivity nuclei, such as 15N and 13C.

Interaction of mastoparan with membranes studied by 1H-NMR spectroscopy in detergent micelles and by solid-state 2H-NMR and 15N-NMR spectroscopy in oriented lipid bilayers

Several complementary NMR approaches were used to study the interaction of mastoparan, a 14-residue peptide toxin from wasp venom, with lipid membranes. First, the 3D structure of mastoparan was determined using 1H-NMR spectroscopy in perdeuterated (SDS-d25) micelles. NOESY experiments and distance geometry calculations yielded a straight amphiphilic alpha-helix with high-order parameters, and the chemical shifts of the amide protons showed a characteristic periodicity of 3-4 residues. Secondly, solid-state 2H-NMR spectoscopy was used to describe the binding of mastoparan to lipid bilayers, composed of headgroup-deuterated dimyristoylglycerophosphocholine (DMPC-d4) and dimyristoylphosphatidylglycerol (DMPG). By correlating the deuterium quadrupole splittings of the alpha-segments and beta-segments, it was possible to differentiate the electrostatically induced structural response of the choline headgroup from dynamic effects induced by the peptide. A partial phase separation was observed, leading to a DMPG-rich phase and a DMPG-depleted phase, each containing some mastoparan. Finally, the insertion and orientation of a specifically 15N-labeled mastoparan (at position Ala10) in the bilayer environment was investigated by solid-state 15N-NMR spectroscopy, using macroscopically oriented samples. Two distinct orientational states were observed for the mastoparan helix, namely an in-plane and a trans-membrane alignment. The two populations of 90% in-plane and 10% trans-membrane helices are characterized by a mosaic spread of +/- 30 degrees and +/- 10 degrees, respectively. The biological activity of mastoparan is discussed in terms of a pore-forming model, as the peptide is known to be able to induce nonlamellar phases and facilitate a flip-flop between the monolayers.