Crystal structure, at 2.6-A resolution, of the Streptomyces lividans xylanase A, a member of the F family of beta-1,4-D-glycanases

Molecular and Biochemical Characterization of Xylanase Produced by Streptomyces viridodiastaticus MS9, a Newly Isolated Soil Bacterium

A xylan-degrading bacterial strain, MS9, was recently isolated from soil samples collected in Namhae, Gyeongsangnam-do, Republic of Korea. This strain was identified as a variant of Streptomyces viridodiastaticus NBRC13106T based on 16S rRNA gene sequencing, DNA-DNA hybridization analysis, and other chemotaxonomic characteristics, and was named S. viridodiastaticus MS9 (=KCTC29014= DSM42055). In this study, we aimed to investigate the molecular and biochemical characteristics of a xylanase (XynCvir) identified from S. viridodiastaticus MS9. XynCvir (molecular weight ≍ 21 kDa) was purified from a modified Luria-Bertani medium, in which cell growth and xylanase production considerably increased after addition of xylan. Thin layer chromatography of xylan-hydrolysate showed that XynCvir is an endo-(1,4)-β-xylanase that degrades xylan into a series of xylooligosaccharides, ultimately converting it to xylobiose. The Km and Vmax values of XynCvir for beechwood xylan were 1.13 mg/ml and 270.3 U/mg, respectively. Only one protein (GHF93985.1, 242 amino acids) containing an amino acid sequence identical to the amino-terminal sequence of XynCvir was identified in the genome of S. viridodiastaticus. GHF93985.1 with the twin-arginine translocation signal peptide is cleaved between Ala-50 and Ala-51 to form the mature protein (21.1 kDa; 192 amino acids), which has the same amino-terminal sequence (ATTITTNQT) and molecular weight as XynCvir, indicating GHF93985.1 corresponds to XynCvir. Since none of the 100 open reading frames most homologous to GHF93985.1 listed in GenBank have been identified for their biochemical functions, our findings greatly contribute to the understanding of their biochemical characteristics.

Identification and spatio-temporal expression analysis of barley genes that encode putative modular xylanolytic enzymes

Arabinoxylans are cell wall polysaccharides whose re-modelling and degradation during plant development are mediated by several classes of xylanolytic enzymes. Here, we present the identification and new annotation of twelve putative (1,4)-β-xylanase and six β-xylosidase genes, and their spatio-temporal expression patterns during vegetative and reproductive growth of barley (Hordeum vulgare cv. Navigator). The encoded xylanase proteins are all predicted to contain a conserved carbohydrate-binding module (CBM) and a catalytic glycoside hydrolase (GH) 10 domain. Additional domains in some xylanases define three discrete phylogenetic clades: one clade contains proteins with an additional N-terminal signal sequence, while another clade contains proteins with multiple CBMs. Homology modelling revealed that all fifteen xylanases likely contain a third domain, a β-sandwich folded from two non-contiguous sequence segments that bracket the catalytic GH domain, which may explain why the full length protein is required for correct folding of the active enzyme. Similarly, predicted xylosidase proteins share a highly conserved domain structure, each with an N-terminal signal peptide, a split GH 3 domain, and a C-terminal fibronectin-like domain. Several genes appear to be ubiquitously expressed during barley growth and development, while four newly annotated xylanase and xylosidase genes are expressed at extremely high levels, which may be of broader interest for industrial applications where cell wall degradation is necessary.

Probing the Relation Between Community Evolution in Dynamic Residue Interaction Networks and Xylanase Thermostability

Residue-residue interactions are the basis of protein thermostability. The molecular conformations of Streptomyces lividans xylanase (xyna_strli) and Thermoascus aurantiacus xylanase (xyna_theau) at 300K, 325K and 350K were obtained by Molecular Dynamics (MD) simulations. Dynamic weighted residue interaction networks were constructed and the rigid-communities were detected using the ESPRA algorithm and the Evolving Graph+Fast-Newman algorithm. The residues in the rigid-communities are primarily located in loop2, short helixes α2^', α3^', α4^' and helixes α3 and α4. Thus, the rigid-community is close to the N-terminus of xylanase, which is usually stabilized to increase thermostability using site-directed mutagenesis. The evolution of the rigid-community with increasing temperature shows a stable synergistic interaction between loop2, α2^', α3^' and α4^' in xyna_theau. In particular, the short helixes α2^' and α3^' form a "thermo helix" to promote thermostability. In addition, tight global interactions between loop2, α2^', α3^', α3, α4^' and α4 of xyna_theau are identified, consisting mainly of hydrogen bonds, van der Waals forces and π-π stacking. These residue interactions are more resistant to high temperatures than those in xyna_strli. Robust residue interactions within these secondary structures are key factors influencing xyna_strli and xyna_theau thermostability. Analyzing the rigid-community can elucidate the cooperation of secondary structures, which cannot be discovered from sequence and 3D structure alone.

A novel thermostable GH10 xylanase with activities on a wide variety of cellulosic substrates from a xylanolytic Bacillus strain exhibiting significant synergy with commercial Celluclast 1.5 L in pretreated corn stover hydrolysis

BACKGROUND

Cellulose and hemicellulose are the two largest components in lignocellulosic biomass. Enzymes with activities towards cellulose and xylan have attracted great interest in the bioconversion of lignocellulosic biomass, since they have potential in improving the hydrolytic performance and reducing the enzyme costs. Exploring glycoside hydrolases (GHs) with good thermostability and activities on xylan and cellulose would be beneficial to the industrial production of biofuels and bio-based chemicals.

RESULTS

A novel GH10 enzyme (XynA) identified from a xylanolytic strain Bacillus sp. KW1 was cloned and expressed. Its optimal pH and temperature were determined to be pH 6.0 and 65 °C. Stability analyses revealed that XynA was stable over a broad pH range (pH 6.0-11.0) after being incubated at 25 °C for 24 h. Moreover, XynA retained over 95% activity after heat treatment at 60 °C for 60 h, and its half-lives at 65 °C and 70 °C were about 12 h and 1.5 h, respectively. More importantly, in terms of substrate specificity, XynA exhibits hydrolytic activities towards xylans, microcrystalline cellulose (filter paper and Avicel), carboxymethyl cellulose (CMC), cellobiose, p-nitrophenyl-β-d-cellobioside (pNPC), and p-nitrophenyl-β-d-glucopyranoside (pNPG). Furthermore, the addition of XynA into commercial cellulase in the hydrolysis of pretreated corn stover resulted in remarkable increases (the relative increases may up to 90%) in the release of reducing sugars. Finally, it is worth mentioning that XynA only shows high amino acid sequence identity (88%) with rXynAHJ14, a GH10 xylanase with no activity on CMC. The similarities with other characterized GH10 enzymes, including xylanases and bifunctional xylanase/cellulase enzymes, are no more than 30%.

CONCLUSIONS

XynA is a novel thermostable GH10 xylanase with a wide substrate spectrum. It displays good stability in a broad range of pH and high temperatures, and exhibits activities towards xylans and a wide variety of cellulosic substrates, which are not found in other GH10 enzymes. The enzyme also has high capacity in saccharification of pretreated corn stover. These characteristics make XynA a good candidate not only for assisting cellulase in lignocellulosic biomass hydrolysis, but also for the research on structure-function relationship of bifunctional xylanase/cellulase.

Discovery of a Thermostable GH10 Xylanase with Broad Substrate Specificity from the Arctic Mid-Ocean Ridge Vent System

A two-domain GH10 xylanase-encoding gene (amor_gh10a) was discovered from a metagenomic data set, generated after in situ incubation of a lignocellulosic substrate in hot sediments on the sea floor of the Arctic Mid-Ocean Ridge (AMOR). AMOR_GH10A comprises a signal peptide, a carbohydrate-binding module belonging to a previously uncharacterized family, and a catalytic glycosyl hydrolase (GH10) domain. The enzyme shares the highest sequence identity (42%) with a hypothetical protein from a Verrucomicrobia bacterium, and its GH10 domain shares low identity (24 to 28%) with functionally characterized xylanases. Purified AMOR_GH10A showed thermophilic and halophilic properties and was active toward various xylans. Uniquely, the enzyme showed high activity toward amorphous cellulose, glucomannan, and xyloglucan and was more active toward cellopentaose than toward xylopentaose. Binding assays showed that the N-terminal domain of this broad-specificity GH10 binds strongly to amorphous cellulose, as well as to microcrystalline cellulose, birchwood glucuronoxylan, barley β-glucan, and konjac glucomannan, confirming its classification as a novel CBM (CBM85).IMPORTANCE Hot springs at the sea bottom harbor unique biodiversity and are a promising source of enzymes with interesting properties. We describe the functional characterization of a thermophilic and halophilic multidomain xylanase originating from the Arctic Mid-Ocean Ridge vent system, belonging to the well-studied family 10 of glycosyl hydrolases (GH10). This xylanase, AMOR_GH10A, has a surprisingly wide substrate range and is more active toward cellopentaose than toward xylopentaose. This substrate promiscuity is unique for the GH10 family and could prove useful in industrial applications. Emphasizing the versatility of AMOR_GH10A, its N-terminal domain binds to both xylans and glycans, while not showing significant sequence similarities to any known carbohydrate-binding module (CBM) in the CAZy database. Thus, this N-terminal domain lays the foundation for the new CBM85 family.

Production of chemicals and proteins using biomass-derived substrates from a Streptomyces host

Bioproduction using microbes from biomass feedstocks is of interest in regards to environmental problems and cost reduction. Streptomyces as an industrial microorganism plays an important role in the production of useful secondary metabolites for various applications. This strain also secretes a wide range of extracellular enzymes which degrade various biopolymers in nature, and it consumes these degrading substrates as nutrients. Hence, Streptomyces can be employed as a cell factory for the conversion of biomass-derived substrates into various products. This review focuses on the following two points: (1) Streptomyces as a producer of enzymes for degrading biomass-derived polysaccharides and polymers; and, (2) wild-type and engineered strains of Streptomyces as a host for chemical production from biomass-derived substrates.

Characterization of Glycosynthase Mutants Derived from Glycoside Hydrolase Family 10 Xylanases

Four xylanases belonging to glycoside hydrolase family 10-Thermotoga maritima XylB (TM), Clostridium stercorarium XynB (CS), Bacillus halodurans XynA (BH), and Cellulomonas fimi Cex (CF)-were converted to glycosynthases by substituting the nucleophilic glutamic acid residues with glycine, alanine, and serine. The glycine mutants exhibited the highest levels of glycosynthase activity with all four enzymes. All the glycine mutants formed polymeric beta-1,4-linked xylopyranose as a precipitate during reaction with alpha-xylobiosyl fluoride. Two glycine mutants (TM and CF) recognized X(2) as an effective acceptor molecule to prohibit the formation of the polymer, while the other two (CS and BH) did not. The difference in acceptor specificity is considered to reflect the difference in substrate affinity at their +2 subsites. The results agreed with the structural predictions of the subsite, where TM and CF exhibit high affinity at subsite 2, suggesting that the glycosynthase technique is useful for investigating the affinity of +subsites.

Molecular analysis of hyperthermophilic endoglucanase Cel12B from Thermotoga maritima and the properties of its functional residues

Background

Although many hyperthermophilic endoglucanases have been reported from archaea and bacteria, a complete survey and classification of all sequences in these species from disparate evolutionary groups, and the relationship between their molecular structures and functions are lacking. The completion of several high-quality gene or genome sequencing projects provided us with the unique opportunity to make a complete assessment and thorough comparative analysis of the hyperthermophilic endoglucanases encoded in archaea and bacteria.

Results

Structure alignment of the 19 hyperthermophilic endoglucanases from archaea and bacteria which grow above 80°C revealed that Gly30, Pro63, Pro83, Trp115, Glu131, Met133, Trp135, Trp175, Gly227 and Glu229 are conserved amino acid residues. In addition, the average percentage composition of residues cysteine and histidine of 19 endoglucanases is only 0.28 and 0.74 while it is high in thermophilic or mesophilic one. It can be inferred from the nodes that there is a close relationship among the 19 protein from hyperthermophilic bacteria and archaea based on phylogenetic analysis. Among these conserved amino acid residues, as far as Cel12B concerned, two Glu residues might be the catalytic nucleophile and proton donor, Gly30, Pro63, Pro83 and Gly227 residues might be necessary to the thermostability of protein, and Trp115, Met133, Trp135, Trp175 residues is related to the binding of substrate. Site-directed mutagenesis results reveal that Pro63 and Pro83 contribute to the thermostability of Cel12B and Met133 is confirmed to have role in enhancing the binding of substrate.

Conclusions

The conserved acids have been shown great importance to maintain the structure, thermostability, as well as the similarity of the enzymatic properties of those proteins. We have made clear the function of these conserved amino acid residues in Cel12B protein, which is helpful in analyzing other undetailed molecular structure and transforming them with site directed mutagenesis, as well as providing the theoretical basis for degrading cellulose from woody and herbaceous plants.

Biochemical characterization and crystal structure of a GH10 xylanase from termite gut bacteria reveal a novel structural feature and significance of its bacterial Ig-like domain

Bacterial Ig-like (Big) domains are commonly distributed in glycoside hydrolases (GH), but their structure and function remains undefined. Xylanase is a GH, and catalyzes the hydrolysis of the internal β-xylosidic linkages of xylan. In this study, we report the molecular cloning, biochemical and biophysical characterization, and crystal structure of a termite gut bacterial xylanase, Xyl-ORF19, which was derived from gut bacteria of a wood-feeding termite (Globitermes brachycerastes). The protein architecture of Xyl-ORF19 reveals that it has two domains, a C-terminal GH10 catalytic domain and an N-terminal Big_2 non-catalytic domain. The catalytic domain folds in an (α/β)8 barrel as most GH10 xylanases do, but it has two extra β-strands. The non-catalytic domain is structurally similar to an immunoglobulin-like domain of intimins. The recombinant enzyme without the non-catalytic domain has fairly low catalytic activity, and is different from the full-length enzyme in kinetic parameters, pH and temperature profiles, which suggests the non-catalytic domain could affect the enzyme biochemical and biophysical properties as well as the role for enzyme localization. This study provides a molecular basis for future efforts in xylanase bioengineering.

A novel highly thermostable xylanase stimulated by Ca2+ from Thermotoga thermarum: cloning, expression and characterization

BACKGROUND

Xylanase is an important component of hemicellulase enzyme system. Since it plays an important role in the hydrolysis of hemicellulose into xylooligosaccharides (XOs), high thermostable xylanase has been the focus of much recent attention as powerful enzyme as well as in the field of biomass utilization.

RESULTS

A xylanase gene (xyn10A) with 3,474 bp was cloned from the extremely thermophilic bacterium Thermotoga thermarum that encodes a protein containing 1,158 amino acid residues. Based on amino acid sequence homology, hydrophobic cluster and three dimensional structure analyses, it was attested that the xylanase belongs to the glycoside hydrolase (GH) families 10 with five carbohydrate binding domains. When the xylanase gene was cloned and expressed in Escherichia coli BL21 (DE3), the specific enzyme activity of xylanase produced by the recombinant strain was up to 145.8 U mg-1. The xylanase was optimally active at 95°C, pH 7.0. In addition, it exhibited high thermostability over broad range of pH 4.0-8.5 and temperature 55-90°C upon the addition of 5 mM Ca2+. Confirmed by Ion Chromatography System (ICS) analysis, the end products of the hydrolysis of beechwood xylan were xylose, xylobiose, xylotriose, xylotetraose, xylopentaose and xylohexaose.

CONCLUSIONS

The xylanase from T. thermarum is one of the hyperthermophilic xylanases that exhibits high thermostability, and thus, is a suitable candidate for generating XOs from cellulosic materials such as agricultural and forestry residues for the uses as prebiotics and precursors for further preparation of furfural and other chemicals.

Emerging role of N- and C-terminal interactions in stabilizing (β/α)8 fold with special emphasis on Family 10 xylanases

Xylanases belong to an important class of industrial enzymes. Various xylanases have been purified and characterized from a plethora of organisms including bacteria, marine algae, plants, protozoans, insects, snails and crustaceans. Depending on the source, the enzymatic activity of xylanases varies considerably under various physico-chemical conditions such as temperature, pH, high salt and in the presence of proteases. Family 10 or glycosyl hydrolase 10 (GH10) xylanases are one of the well characterized and thoroughly studied classes of industrial enzymes. The TIM-barrel fold structure which is ubiquitous in nature is one of the characteristics of family 10 xylanases. Family 10 xylanases have been used as a “model system” due to their TIM-barrel fold to dissect and understand protein stability under various conditions. A better understanding of structure-stability-function relationships of family 10 xylanases allows one to apply these governing molecular rules to engineer other TIM-barrel fold proteins to improve their stability and retain function(s) under adverse conditions. In this review, we discuss the implications of N-and C-terminal interactions, observed in family 10 xylanases on protein stability under extreme conditions. The role of metal binding and aromatic clusters in protein stability is also discussed. Studying and understanding family 10 xylanase structure and function, can contribute to our protein engineering knowledge.

Characterization and pH-dependent substrate specificity of alkalophilic xylanase from Bacillus alcalophilus

The gene of endo-beta-1-4 xylanase, xynT, was cloned from Bacillus alcalophilus AX2000 and expressed in Escherichia coli. This XynT, which belongs to glycoside hydrolase (GH) family 10, was found to have a molecular weight of approximately 37 kDa and exhibit optimal activity at pH 7-9 and 50 °C. It exhibits a high activity towards birchwood xylan and has the ability to bind avicel. Under optimal conditions, XynT hydrolyzes all xylooligomers into xylobiose as an end product with a preference for cleavage sites at the second or third glycosidic bond from the reducing end. XynT has a different substrate affinity on xylooligomers at pH 5.0, which contributes to its low activity toward xylotriose and its derived intermediate products. This low activity may be due to an unstable interaction with the amino acids that constitute subsites of the active site. Interestingly, the addition of Co(2+) and Mn(2+) led to a significant increase in activity by up to 40 and 50 %, respectively. XynT possesses a high binding affinity and hydrolytic activity toward the insoluble xylan, for which it exhibits high activity at pH 7-9, giving rise to its efficient biobleaching effect on Pinus densiflora kraft pulp.

Crystal structure of hyperthermophilic endo-β-1,4-glucanase: implications for catalytic mechanism and thermostability

Endo-β-1,4-glucanase from thermophilic Fervidobacterium nodosum Rt17-B1 (FnCel5A), a new member of glycosyl hydrolase family 5, is highly thermostable and exhibits the highest activity on carboxymethylcellulose among the reported homologues. To understand the structural basis for the thermostability and catalytic mechanism, we report here the crystal structures of FnCel5A and the complex with glucose at atomic resolution. FnCel5A exhibited a (β/α)(8)-barrel structure typical of clan GH-A of the glycoside hydrolase families with a large and deep catalytic pocket located in the C-terminal end of the β-strands that may permit substrate access. A comparison of the structure of FnCel5A with related structures from thermopile Clostridium thermocellum, mesophile Clostridium cellulolyticum, and psychrophile Pseudoalteromonas haloplanktis showed significant differences in intramolecular interactions (salt bridges and hydrogen bonds) that may account for the difference in their thermostabilities. The substrate complex structure in combination with a mutagenesis analysis of the catalytic residues implicates a distinctive catalytic module Glu(167)-His(226)-Glu(283), which suggests that the histidine may function as an intermediate for the electron transfer network between the typical Glu-Glu catalytic module. Further investigation suggested that the aromatic residues Trp(61), Trp(204), Phe(231), and Trp(240) as well as polar residues Asn(51), His(127), Tyr(228), and His(235) in the active site not only participated in substrate binding but also provided a unique microenvironment suitable for catalysis. These results provide substantial insight into the unique characteristics of FnCel5A for catalysis and adaptation to extreme temperature.

GH11 xylanases: Structure/function/properties relationships and applications

For technical, environmental and economical reasons, industrial demands for process-fitted enzymes have evolved drastically in the last decade. Therefore, continuous efforts are made in order to get insights into enzyme structure/function relationships to create improved biocatalysts. Xylanases are hemicellulolytic enzymes, which are responsible for the degradation of the heteroxylans constituting the lignocellulosic plant cell wall. Due to their variety, xylanases have been classified in glycoside hydrolase families GH5, GH8, GH10, GH11, GH30 and GH43 in the CAZy database. In this review, we focus on GH11 family, which is one of the best characterized GH families with bacterial and fungal members considered as true xylanases compared to the other families because of their high substrate specificity. Based on an exhaustive analysis of the sequences and 3D structures available so far, in relation with biochemical properties, we assess biochemical aspects of GH11 xylanases: structure, catalytic machinery, focus on their "thumb" loop of major importance in catalytic efficiency and substrate selectivity, inhibition, stability to pH and temperature. GH11 xylanases have for a long time been used as biotechnological tools in various industrial applications and represent in addition promising candidates for future other uses.

Adaptation of the highly productive T7 expression system to Streptomyces lividans

Streptomyces lividans is a Gram-positive bacterium known for its remarkable secretion efficiency and low extracellular protease activity. In the present work, we adapted the highly productive T7 expression system to S. lividans. A codon-optimized T7 RNA polymerase gene was chromosomally integrated, and a bifunctional T7 expression vector was constructed.

Putative endogenous xylanase from brackish-water clam Corbicula japonica

Xylan digestion by Corbicula japonica was investigated according to the hypothesis that C. japonica can breakdown xylan as well as cellulose. C. japonica showed relatively high xylanase activity compared to other bivalve species. Molecular cloning of a xylanase gene was performed in order to determine whether C. japonica possesses an endogenous xylanase, and resulted in the isolation of cDNA with an ORF of 2523 bp corresponding to 840 amino acids (CjXyn10A). CjXyn10A has a Glycoside Hydrolase Family 10 (GHF10) catalytic domain, N-terminal family 4 carbohydrate binding domain and novel C-terminal cysteine-rich domain. Phylogenetic analysis implies that this gene has common evolutional origin with other GHF10 genes of animal origin. Reverse transcription (RT)-PCR analysis and in situ hybridization revealed that CjXyn10A is likely to be expressed in the secretory cells in the digestive gland, suggesting that this enzyme is produced in the same site as previously reported endogenous cellulases of C. japonica. These findings suggest that CjXyn10A is an endogenous xylanase gene of this species. The occurrence of an endogenous xylanase gene in addition to cellulase genes in C. japonica strongly supports our hypothesis that this species can decompose plant-derived structural polysaccharides.

Enzymatic deconstruction of xylan for biofuel production

The combustion of fossil-derived fuels has a significant impact on atmospheric carbon dioxide (CO(2)) levels and correspondingly is an important contributor to anthropogenic global climate change. Plants have evolved photosynthetic mechanisms in which solar energy is used to fix CO(2) into carbohydrates. Thus, combustion of biofuels, derived from plant biomass, can be considered a potentially carbon neutral process. One of the major limitations for efficient conversion of plant biomass to biofuels is the recalcitrant nature of the plant cell wall, which is composed mostly of lignocellulosic materials (lignin, cellulose, and hemicellulose). The heteropolymer xylan represents the most abundant hemicellulosic polysaccharide and is composed primarily of xylose, arabinose, and glucuronic acid. Microbes have evolved a plethora of enzymatic strategies for hydrolyzing xylan into its constituent sugars for subsequent fermentation to biofuels. Therefore, microorganisms are considered an important source of biocatalysts in the emerging biofuel industry. To produce an optimized enzymatic cocktail for xylan deconstruction, it will be valuable to gain insight at the molecular level of the chemical linkages and the mechanisms by which these enzymes recognize their substrates and catalyze their reactions. Recent advances in genomics, proteomics, and structural biology have revolutionized our understanding of the microbial xylanolytic enzymes. This review focuses on current understanding of the molecular basis for substrate specificity and catalysis by enzymes involved in xylan deconstruction.

Polysaccharide hydrolase folds diversity of structure and convergence of function

Polysaccharide glycosyl hydrolases are a group of enzymes that hydrolyze the glycosidic bond between carbohydrates or between a carbohydrate and a noncarbohydrate moiety. Here we illustrate that traditional schemes for grouping enzymes, such as by substrate specificity or by organism of origin, are not appropriate when thinking of structure-function relationships and protein engineering. Instead, sequence comparisons and structural studies reveal that enzymes with diverse specificities and from diverse organisms can be placed into groups among which mechanisms are largely conserved and insights are likely to be transferrable. In particular, we illustrate how enzymes have been grouped using protein sequence alignment algorithms and hydrophobic cluster analysis. Unfortunately for those who seek to improve cellulase function by design, cellulases are distributed throughout glycosyl hydrolase Families 1,5,6,7,9, and 45. These cellulase families include members from widely different fold types, i.e., the TIM-barrel, betaalphabeta-barrel variant (a TIM-barrel-like structure that is imperfectly superimposable on the TIM-barrel template), beta-sandwich, and alpha-helix circular array. This diversity in cellulase fold structure must be taken into account when considering the transfer and application of design strategies between various cellulases.

Effect of protease mutations on the production of xylanases in Streptomyces lividans

Three protease mutants--7 (tap-), 12 (tap-, ssp-), and 17 (multiple mutations)--of Streptomyces lividans were tested for their influence on protein secretion. Streptomyces lividans grown in xylan secretes 3 xylanases (A, B, and C). Xylanases A (XlnA) and B (XlnB) are secreted by the Sec pathway, whereas xylanase C (XlnC) is secreted by the Tat pathway. The production of XlnA and XlnC was affected in the mutants, suggesting that the mutations interfered with both Sec- and Tat-secretion systems. However, the processing rate for the Sec and Tat precursor was similar to the wild-type strain, indicating that the mutations had no direct effect on secretion. Streptomyces lividans naturally produced 2 forms of XlnB: XlnB1, which contains the catalytic and the xylan-binding domains, and XlnB2, which contains the catalytic domain only. There was no change from the wild-type strain in the ratio of XlnB1/XlnB2 produced by the mutants, indicating that these proteases are not involved in this process. Although XlnA1, partially truncated in its xylan-binding domain, was rapidly degraded to its catalytic domain (XlnA2) in the wild-type strain, the rate of conversion was reduced in the 3 mutants, indicating that the proteases participated to some extent in this proteolytic process.

Crystal structures of native and xylosaccharide-bound alkali thermostable xylanase from an alkalophilic Bacillus sp. NG-27: structural insights into alkalophilicity and implications for adaptation to polyextreme conditions

Crystal structures are known for several glycosyl hydrolase family 10 (GH10) xylanases. However, none of them is from an alkalophilic organism that can grow in alkaline conditions. We have determined the crystal structures at 2.2 Angstroms of a GH10 extracellular endoxylanase (BSX) from an alkalophilic Bacillus sp. NG-27, for the native and the complex enzyme with xylosaccharides. The industrially important enzyme is optimally active and stable at 343 K and at a pH of 8.4. Comparison of the structure of BSX with those of other thermostable GH10 xylanases optimally active at acidic or close to neutral pH showed that the solvent-exposed acidic amino acids, Asp and Glu, are markedly enhanced in BSX, while solvent-exposed Asn was noticeably depleted. The BSX crystal structure when compared with putative three-dimensional homology models of other extracellular alkalophilic GH10 xylanases from alkalophilic organisms suggests that a protein surface rich in acidic residues may be an important feature common to these alkali thermostable enzymes. A comparison of the surface features of BSX and of halophilic proteins allowed us to predict the activity of BSX at high salt concentrations, which we verified through experiments. This offered us important lessons in the polyextremophilicity of proteins, where understanding the structural features of a protein stable in one set of extreme conditions provided clues about the activity of the protein in other extreme conditions. The work brings to the fore the role of the nature and composition of solvent-exposed residues in the adaptation of enzymes to polyextreme conditions, as in BSX.

Cloning and expression of xylanase 10 from Cryptovalsa mangrovei (BCC7197) in Pichia pastoris

Xylanases are one of the industrially valuable enzymes. Using RT-PCR and 5'- and 3'-RACE procedures, we have cloned a full-length xylanase encoding gene from a filamentous fungus, Cryptovalsa mangrovei (BCC7197) from Phuket, Thailand. The results showed that BCC7197 xylanase cDNA has an open reading frame of 978 bp encoding 325 amino acid residues. Further sequence analysis revealed that this xylanase gene is belonged to the glycosyl hydrolase family 10 and has approximately 50-60% amino acid sequence similarity to other fungal xylanases. Furthermore, expression of BCC7197 xylanase in the Pichia pastoris was also performed. The results demonstrated that the active BCC7197 xylanase protein was successfully produced and secreted from P. pastoris.

His374 of wheat endoxylanase inhibitor TAXI-I stabilizes complex formation with glycoside hydrolase family 11 endoxylanases

Wheat endoxylanase inhibitor TAXI-I inhibits microbial glycoside hydrolase family 11 endoxylanases. Crystallographic data of an Aspergillus niger endoxylanase-TAXI-I complex showed His374 of TAXI-I to be a key residue in endoxylanase inhibition. Its role in enzyme-inhibitor interaction was further investigated by site-directed mutagenesis of His374 into alanine, glutamine or lysine. Binding kinetics and affinities of the molecular interactions between A. niger, Bacillus subtilis, Trichoderma longibrachiatumendoxylanases and wild-type TAXI-I and TAXI-I His374 mutants were determined by surface plasmon resonance analysis. Enzyme-inhibitor binding was in accordance with a simple 1 : 1 binding model. Association and dissociation rate constants of wild-type TAXI-I towards the endoxylanases were in the range between 1.96 and 36.1 x 10(4)m(-1) x s(-1) and 0.72-3.60 x 10(-4) x s(-1), respectively, resulting in equilibrium dissociation constants in the low nanomolar range. Mutation of TAXI-I His374 to a variable degree reduced the inhibition capacity of the inhibitor mainly due to higher complex dissociation rate constants (three- to 80-fold increase). The association rate constants were affected to a smaller extent (up to eightfold decrease). Substitution of TAXI-I His374 therefore strongly affects the affinity of the inhibitor for the enzymes. In addition, the results show that His374 plays a critical role in the stabilization of the endoxylanase-TAXI-I complex rather than in the docking of inhibitor onto enzyme.

Structural basis of the substrate subsite and the highly thermal stability of xylanase 10B from Thermotoga maritima MSB8

The crystal structure of xylanase 10B from Thermotoga maritima MSB8 (TmxB), a hyperthermostable xylanase, has been solved in its native form and in complex with xylobiose or xylotriose at 1.8 A resolution. In order to gain insight into the substrate subsite and the molecular features for thermal stability, we compared TmxB with family 10 xylanase structures from nine microorganisms. As expected, TmxB folds into a (beta/alpha)8-barrel structure, which is common among the glycoside hydrolase family 10. The enzyme active site and the environment surrounding the xylooligosaccharide of TmxB are highly similar to those of family 10 xylanases. However, only two xylose moieties were found in its binding pocket from the TmxB-xylotriose complex structure. This finding suggests that TmxB could be a potential biocatalyst for the large-scale production of xylobiose. The result of structural analyses also indicated that TmxB possesses some additional features that account for its thermostability. In particular, clusters of aromatic residues together with a lack of exposed hydrophobic residues are characteristic of the TmxB structure. TmxB has also a significant number of ion pairs on the protein surface that are not found in other thermophilic family 10 xylanases.

The role of conserved arginine residue in loop 4 of glycoside hydrolase family 10 xylanases

An arginine residue in loop 4 connecting beta strand 4 and alpha-helix 4 is conserved in glycoside hydrolase family 10 (GH10) xylanases. The arginine residues, Arg(204) in xylanase A from Bacillus halodurans C-125 (XynA) and Arg(196) in xylanase B from Clostridium stercorarium F9 (XynB), were replaced by glutamic acid, lysine, or glutamine residues (XynA R204E, K and Q, and XynB R196E, K and Q). The pH-k(cat)/K(m) and the pH-k(cat) relationships of these mutant enzymes were measured. The pK(e2) and pK(es2) values calculated from these curves were 8.59 and 8.29 (R204E), 8.59 and 8.10 (R204K), 8.61 and 8.19 (R204Q), 7.42 and 7.19 (R196E), 7.49 and 7.18 (R196K), and 7.86 and 7.38 (R196Q) respectively. Only the pK(es2) value of arginine derivatives was less than those of the wild types (8.49 and 9.39 [XynA] and 7.62 and 7.82 [XynB]). These results suggest that the conserved arginine residue in GH10 xylanases increases the pK(a) value of the proton donor Glu during substrate binding. The arginine residue is considered to clamp the proton donor and subsite +1 to prevent structural change during substrate binding.

Increase in xylanase production by Streptomyces lividans through simultaneous use of the Sec- and Tat-dependent protein export systems

Xylanase B1 (XlnB1) from Streptomyces lividans is a protein consisting of two discrete structural and functional units, an N-terminal catalytic domain and a C-terminal substrate binding domain. In the culture medium, two forms of xylanase B are present, namely, XlnB1 and XlnB2, the latter of which corresponds to the catalytic domain of XlnB1 deprived of the substrate binding domain. Both forms of the xylanase have the same activity on xylan. The enzyme is secreted through the Sec-dependent pathway with a better yield of XlnB1 than XlnB2. Interestingly, XlnB2 exhibits 80% identity with XlnC which is secreted exclusively through the Tat-dependent pathway. To demonstrate whether XlnB1 and XlnB2 could also be secreted through the Tat-dependent pathway, the Tat-targeting xlnC signal sequence was fused to the structural genes of xlnB1 and xlnB2. Both XlnB1 and XlnB2 were secreted through the Tat-dependent pathway, but XlnB2 was better produced than XlnB1. As XlnB1 and XlnB2 could be better secreted through the Sec- and Tat-dependent systems, respectively, a copy of the structural gene of xlnB1 fused to a Sec signal sequence and a copy of the structural gene of xlnB2 fused to a Tat signal sequence were inserted into the same plasmid under the control of the xlnA promoter. The transformant produced xylanase activity which corresponded approximately to the sum of activities of the individual strain producing xylanase by either the Sec- or Tat-dependent secretion system. This indicated that both secretion systems are functional and independent of each other in the recombinant strain. This is the first report on the efficient secretion of a protein using two different secretion systems at the same time. Assuming that the protein to be secreted could be properly folded prior to and after translocation via the Tat- and Sec-dependent pathways, respectively, the simultaneous use of the Sec- and Tat-dependent pathways provides an efficient means to increase the production of a given protein.

Wrap-and-Pack: A New Paradigm for Beta Structural Motif Recognition with Application to Recognizing Beta Trefoils

A method is presented that uses beta-strand interactions at both the sequence and the atomic level, to predict beta-structural motifs of protein sequences. A program called Wrap-and- Pack implements this method and is shown to recognize beta-trefoils, an important class of globular beta-structures, in the Protein Data Bank with 92% specificity and 92.3% sensitivity in cross-validation. It is demonstrated that Wrap-and-Pack learns each of the ten known SCOP beta-trefoil families, when trained primarily on beta-structures that are not beta-trefoils, together with three-dimensional structures of known beta-trefoils from outside the family. Wrap-and-Pack also predicts many proteins of unknown structure to be beta-trefoils. The computational method used here may generalize to other beta-structures for which strand topology and profiles of residue accessibility are well conserved.

Characterization of thermostable Xyn10A enzyme from mesophilic Clostridium acetobutylicum ATCC 824

A thermostable xylanase gene, xyn10A (CAP0053), was cloned from Clostridium acetobutylicum ATCC 824. The nucleotide sequence of the C. acetobutylicum xyn10A gene encoded a 318-amino-acid, single-domain, family 10 xylanase, Xyn10A, with a molecular mass of 34 kDa. Xyn10A exhibited extremely high (92%) amino acid sequence identity with Xyn10B (CAP0116) of this strain and had 42% and 32% identity with the catalytic domains of Rhodothermus marinus xylanase I and Thermoascus aurantiacus xylanase I, respectively. Xyn10A enzyme was purified from recombinant Escherichia coli and was highly active toward oat-spelt and Birchwood xylan and slightly active toward carboxymethyl cellulose, arabinogalactouronic acid, and various p-nitrophenyl monosaccharides. Xyn10A hydrolyzed xylan and xylooligosaccharides larger than xylobiose to produce xylose. This enzyme was optimally active at 60 degrees C and had an optimum pH of 5.0. This is one of a number of related activities encoded on the large plasmid in this strain.

Isolation and expression of the xynB gene and its product, XynB, a consistent component of the Clostridium cellulovorans cellulosome

The nucleotide sequence of the Clostridium cellulovorans xynB gene, which encodes the XynB xylanase, consists of 1,821 bp and encodes a protein of 607 amino acids with a molecular weight of 65,976. XynB contains a typical N-terminal signal peptide of 29 amino acid residues, followed by a 147-amino-acid sequence that is homologous to the family 4-9 (subfamily 9 in family 4) carbohydrate-binding domain. Downstream of this domain is a family 10 catalytic domain of glycosyl hydrolase. The C terminus separated from the catalytic domain by a short linker sequence contains a dockerin domain responsible for cellulosome assembly. The XynB sequence from mass spectrometry and N-terminal amino acid sequence analyses agreed with that deduced from the nucleotide sequence. XynB was highly active toward xylan, but not active toward carboxymethyl cellulose. The enzyme was optimally active at 40 degrees C and pH 5.0. Northern hybridizations revealed that xynB is transcribed as a monocistronic 1.9-kb mRNA. RNA ligase-mediated rapid amplification of 5' cDNA ends by PCR (RLM-5'RACE PCR) analysis of C. cellulovorans RNA identified a single transcriptional start site of xynB located 47 bp upstream from the first nucleotide of the translation initiation codon. Alignment of the xynB promoter region provided evidence for highly conserved sequences that exhibited strong similarity to the sigmaA consensus promoter sequences of gram-positive bacteria. Expression of xynB mRNA increased from early to middle exponential phase and decreased during the early stationary phase when the cells were grown on cellobiose. No alternative promoter was observed by RLM-5'RACE PCR and reverse transcriptase PCR analyses during expression. The analysis of the products from xylan hydrolysis by thin-layer chromatography indicated its endoxylanase activity. The results suggest that XynB is a consistent and major cellulosomal enzyme during growth on cellulose or xylan.

Inactivated enzymes as probes of the structure of arabinoxylans as observed by atomic force microscopy

The complex structures of water-soluble wheat arabinoxylans have been mapped along individual molecules, and within populations, using the visualisation of the binding of inactivated enzymes by atomic force microscopy (AFM). It was demonstrated that site-directed mutagenesis (SDM) can be used to produce inactive enzymes as structural probes. For the SDM mutants AFM has been used to compare the binding of different xylanases to arabinoxylans. Xylanase mutant E386A, derived from the Xyn11A enzyme (Neocallimastrix patriciarium), was shown to bind randomly along arabinoxylan molecules. The xylanase binding was also monitored following Aspergillus niger arabinofuranosidase pre-treatment of samples. It was demonstrated that removal of arabinose side chains significantly altered the binding pattern of the inactivated enzyme. Xylanase mutant E246A, derived from the Xyn10A enzyme (Cellvibrio japonicus), was found to show deviations from random binding to the arabinoxylan chains. It is believed that this is due to the effect of a small residual catalytic activity of the enzyme that alters the binding pattern of the probe. Control procedures were developed and assessed to establish that the interactions between the modified xylanases and the arabinoxylans were specific interactions. The experimental data demonstrates the potential for using inactivated enzymes and AFM to probe the structural heterogeneity of individual polysaccharide molecules.

Mapping glycoside hydrolase substrate subsites by isothermal titration calorimetry

Relating thermodynamic parameters to structural and biochemical data allows a better understanding of substrate binding and its contribution to catalysis. The analysis of the binding of carbohydrates to proteins or enzymes is a special challenge because of the multiple interactions and forces involved. Isothermal titration calorimetry (ITC) provides a direct measure of binding enthalpy (DeltaHa) and allows the determination of the binding constant (free energy), entropy, and stoichiometry. In this study, we used ITC to elucidate the binding thermodynamics of xylosaccharides for two xylanases of family 10 isolated from Geobacillus stearothermophilus T-6. The change in the heat capacity of binding (DeltaCp = DeltaH/DeltaT) for xylosaccharides differing in one sugar unit was determined by using ITC measurements at different temperatures. Because hydrophobic stacking interactions are associated with negative DeltaCp, the data allow us to predict the substrate binding preference in the binding subsites based on the crystal structure of the enzyme. The proposed positional binding preference was consistent with mutants lacking aromatic binding residues at different subsites and was also supported by tryptophan fluorescence analysis.

Thermostable xylanase10B from Clostridium acetobutylicum ATCC824

The Clostridium acetobutylicum xylanase gene xyn10B (CAP0116) was cloned from the type strain ATCC 824, whose genome was recently sequenced. The nucleotide sequence of C. acetobutylicum xyn10B encodes a 318-amino acid protein. Xyn10B consists of a single catalytic domain that belongs to family 10 of glycosyl hydrolases. The enzyme was purified from recombinant Escherichia coli. The Xyn10B enzyme was highly active toward birchwood xylan, oat-spelt xylan, and moderately active toward avicel, carboxymethyl cellulose, polygalacturonic acid, lichenan, laminarin, barley-beta-glucan and various p-nitrophenyl monosaccharides. Xyn10B hydrolyzed xylan and xylooligosaccharides to produce xylobiose and xylotriose. The pH optimum of Xyn10B was 5.0, and the optimal temperature was 70 degrees C. The enzyme was stable at 60 degrees C at pH 5.0-6.5 for 1 h without substrate. This is one of a number of xylan-related activities encoded on the large plasmid in C. acetobutylicum ATCC 824.

Structure and function of a family 10 beta-xylanase chimera of Streptomyces olivaceoviridis E-86 FXYN and Cellulomonas fimi Cex

The catalytic domain of xylanases belonging to glycoside hydrolase family 10 (GH10) can be divided into 22 modules (M1 to M22; Sato, Y., Niimura, Y., Yura, K., and Go, M. (1999) Gene (Amst.) 238, 93-101). Inspection of the crystal structure of a GH10 xylanase from Streptomyces olivaceoviridis E-86 (SoXyn10A) revealed that the catalytic domain of GH10 xylanases can be dissected into two parts, an N-terminal larger region and C-terminal smaller region, by the substrate binding cleft, corresponding to the module border between M14 and M15. It has been suggested that the topology of the substrate binding clefts of GH10 xylanases are not conserved (Charnock, S. J., Spurway, T. D., Xie, H., Beylot, M. H., Virden, R., Warren, R. A. J., Hazlewood, G. P., and Gilbert, H. J. (1998) J. Biol. Chem. 273, 32187-32199). To facilitate a greater understanding of the structure-function relationship of the substrate binding cleft of GH10 xylanases, a chimeric xylanase between SoXyn10A and Xyn10A from Cellulomonas fimi (CfXyn10A) was constructed, and the topology of the hybrid substrate binding cleft established. At the three-dimensional level, SoXyn10A and CfXyn10A appear to possess 5 subsites, with the amino acid residues comprising subsites -3 to +1 being well conserved, although the +2 subsites are quite different. Biochemical analyses of the chimeric enzyme along with SoXyn10A and CfXyn10A indicated that differences in the structure of subsite +2 influence bond cleavage frequencies and the catalytic efficiency of xylooligosaccharide hydrolysis. The hybrid enzyme constructed in this study displays fascinating biochemistry, with an interesting combination of properties from the parent enzymes, resulting in a low production of xylose.

Crystal structures of decorated xylooligosaccharides bound to a family 10 xylanase from Streptomyces olivaceoviridis E-86

The family 10 xylanase from Streptomyces olivaceoviridis E-86 (SoXyn10A) consists of a GH10 catalytic domain, which is joined by a Gly/Pro-rich linker to a family 13 carbohydrate-binding module (CBM13) that interacts with xylan. To understand how GH10 xylanases and CBM13 recognize decorated xylans, the crystal structure of SoXyn10A was determined in complex with alpha-l-arabinofuranosyl- and 4-O-methyl-alpha-d-glucuronosyl-xylooligosaccharides. The bound sugars were observed in the subsites of the catalytic cleft and also in subdomains alpha and gamma of CBM13. The data reveal that the binding mode of the oligosaccharides in the active site of the catalytic domain is entirely consistent with the substrate specificity and, in conjunction with the accompanying paper, demonstrate that the accommodation of the side chains in decorated xylans is conserved in GH10 xylanases of SoXyn10A against arabinoglucuronoxylan. CBM13 was shown to bind xylose or xylooligosaccharides reversibly by using nonsymmetric sugars as the ligands. The independent multiple sites in CBM13 may increase the probability of substrate binding.

First crystallographic structure of a xylanase from glycoside hydrolase family 5: implications for catalysis

The room-temperature structure of xylanase (EC 3.2.1.8) from the bacterial plant pathogen Erwinia chrysanthemi expressed in Escherichia coli, a 45 kDa, 413-amino acid protein belonging to glycoside hydrolase family 5, has been determined by multiple isomorphous replacement and refined to a resolution of 1.42 A. This represents the first structure of a xylanase not belonging to either glycoside hydrolase family 10 or family 11. The enzyme is composed of two domains similar to most family 10 xylanases and the alpha-amylases. The catalytic domain (residues 46-315) has a (beta/alpha)(8)-barrel motif with a binding cleft along the C-terminal side of the beta-barrel. The catalytic residues, Glu165 and Glu253, determined by correspondence to other family 5 and family 10 glycoside hydrolases, lie inside this cleft on the C-terminal ends of beta-strands 4 and 7, respectively, with an O(epsilon)2...O(epsilon)1 distance of 4.22 A. The smaller domain (residues 31-43 and 323-413) has a beta(9)-barrel motif with five of the strands interfacing with alpha-helices 7 and 8 of the catalytic domain. The first 13 N-terminal residues form one beta-strand of this domain. Residues 44, 45, and 316-322 form the linkers between this domain and the catalytic domain.

Characteristics of a cluster of xylanase genes in Fibrobacter succinogenes S85

Xylanase genes xyn10D, xyn10E, and xyn10B, located sequentially on the Fibrobacter succinogenes S85 chromosome, were separately cloned and their properties characterized. Analysis of the sequences documented that xylanases Xyn10D, Xyn10E, and Xyn10B each consist of an N-terminal catalytic domain (glycosyl hydrolase family 10) and a C-terminal carbohydrate-binding module (CBM, family 6) connected by proline-rich linker sequences. The amino acid sequences exhibited similarities of between 53 and 60%. The xyn10D, xyn10E, and truncated xyn10deltaACBM were expressed in Escherichia coli and purified to homogeneity. The purified Xyn10D, Xyn10E, and Xyn10BdeltaCBM exhibited the same temperature optimum (40 degrees C) and pH optimum (6.5) and the highest specific activity against arabinoxylan, oat spelt xylan, and birchwood xylan, respectively. Xyn10D exhibited an affinity for cellulose and xylan with 47 and 33% binding, respectively, while the truncated Xyn10DdeltaCBM did not bind to the substrates. The main hydrolysis products of the three xylanases acting on oat spelt xylan and arabinoxylan were xylose and xylobiose. RT-PCR analysis showed that the three genes were co-transcribed as a single transcript. Western immunoblot analysis revealed that the three xylanases were expressed at a very low level by F. succinogenes grown on either glucose or cellulose as the source of carbohydrate.

Differential scanning calorimetric, circular dichroism, and Fourier transform infrared spectroscopic characterization of the thermal unfolding of xylanase A from Streptomyces lividans

The thermal unfolding of xylanase A from Streptomyces lividans, and of its isolated substrate binding and catalytic domains, was studied by differential scanning calorimetry and Fourier transform infrared and circular dichroism spectroscopy. Our calorimetric studies show that the thermal denaturation of the intact enzyme is a complex process consisting of two endothermic events centered near 57 and 64 degrees C and an exothermic event centered near 75 degrees C, all of which overlap slightly on the temperature scale. A comparison of the data obtained with the intact enzyme and isolated substrate binding and catalytic domains indicate that the lower- and higher-temperature endothermic events are attributable to the thermal unfolding of the xylan binding and catalytic domains, respectively, whereas the higher-temperature exothermic event arises from the aggregation and precipitation of the denatured catalytic domain. Moreover, the thermal unfolding of the two domains of the native enzyme are thermodynamically independent and differentially sensitive to pH. The unfolding of the substrate binding domain is a reversible two-state process and, under appropriate conditions, the refolding of this domain to its native conformation can occur. In contrast, the unfolding of the catalytic domain is a more complex process in which two subdomains unfold independently over a similar temperature range. Also, the unfolding of the catalytic domain leads to aggregation and precipitation, which effectively precludes the refolding of the protein to its native conformation. These observations are compatible with the results of our spectroscopic studies, which show that the catalytic and substrate binding domains of the enzyme are structurally dissimilar and that their native conformations are unaffected by their association in the intact enzyme. Thus, the calorimetric and spectroscopic data demonstrate that the S. lividans xylanase A consists of structurally dissimilar catalytic and substrate binding domains that, although covalently linked, undergo essentially independent thermal denaturation. These observations provide valuable new insights into the structure and thermal stability of this enzyme and should assist our efforts at engineering xylanases that are more thermally robust and otherwise better suited for industrial applications.

A novel family 8 xylanase, functional and physicochemical characterization

Xylanases are generally classified into glycosyl hydrolase families 10 and 11 and are found to frequently have an inverse relationship between their pI and molecular mass values. However, we have isolated a psychrophilic xylanase that belongs to family 8 and which has both a high pI and high molecular mass. This novel xylanase, isolated from the Antarctic bacterium Pseudoalteromonas haloplanktis, is not homologous to family 10 or 11 enzymes but has 20-30% identity with family 8 members. NMR analysis shows that this enzyme hydrolyzes with inversion of anomeric configuration, in contrast to other known xylanases which are retaining. No cellulase, chitosanase or lichenase activity was detected. It appears to be functionally similar to family 11 xylanases. It hydrolyzes xylan to principally xylotriose and xylotetraose and is most active on long chain xylo-oligosaccharides. Kinetic studies indicate that it has a large substrate binding cleft, containing at least six xylose-binding subsites. Typical psychrophilic characteristics of a high catalytic activity at low temperatures and low thermal stability are observed. An evolutionary tree of family 8 enzymes revealed the presence of six distinct clusters. Indeed classification in family 8 would suggest an (alpha/alpha)(6) fold, distinct from that of other currently known xylanases.