The influence of amino substitutions within the mature part of an Escherichia coli outer membrane protein (OmpA) on assembly of the polypeptide into its membrane

The role of short-chain conjugated poly-(R)-3-hydroxybutyrate (cPHB) in protein folding

Poly-(R)-3-hydroxybutyrate (PHB), a linear polymer of R-3-hydroxybutyrate (R-3HB), is a fundamental constituent of biological cells. Certain prokaryotes accumulate PHB of very high molecular weight (10,000 to >1,000,000 residues), which is segregated within granular deposits in the cytoplasm; however, all prokaryotes and all eukaryotes synthesize PHB of medium-chain length (~100-200 residues) which resides within lipid bilayers or lipid vesicles, and PHB of short-chain length (<12 residues) which is conjugated to proteins (cPHB), primarily proteins in membranes and organelles. The physical properties of cPHB indicate it plays important roles in the targeting and folding of cPHB-proteins. Here we review the occurrence, physical properties and molecular characteristics of cPHB, and discuss its influence on the folding and structure of outer membrane protein A (OmpA) of Escherichia coli.

Physiological importance of poly-(R)-3-hydroxybutyrates

Poly-(R)-3-hydroxybutyrates (PHB), linear polymers of (R)-3-hydroxybutyrate, are components of all biological cells in which short polymers (<200 monomer residues) are covalently attached to certain proteins and/or noncovalently associated with polyphosphates - inorganic polyphosphate (polyP), RNA, and DNA. The low concentrations, lack of unusual atoms or functional groups, and flexible backbones of this complexed PHB, referred to as cPHB, make them invisible to many analytical procedures; whereas other physical properties - water-insolubility, high intrinsic viscosity, temperature sensitivity, multiple bonding interactions with other molecules - make them requisite participants in vital physiological processes as well as contributors to the development of certain diseases.

Insights into the structure and assembly of Escherichia coli outer membrane protein A

Outer membrane protein A (OmpA) of Escherichia coli is a paradigm for the biogenesis of outer membrane proteins; however, the structure and assembly of OmpA have remained controversial. A review of studies to date supports the hypothesis that native OmpA is a single-domain large pore, while a two-domain narrow-pore structure is a folding intermediate or minor conformer. The in vitro refolding of OmpA to the large-pore conformation requires isolation of the protein from outer membranes with retention of an intact disulfide bond followed by sufficient incubation in lipids at temperatures of ≥ 26 °C to overcome the high energy of activation for refolding. The in vivo maturation of the protein involves covalent modification of serines in the eighth β-barrel of the N-terminal domain by oligo-(R)-3-hydroxybutyrates as the protein is escorted across the cytoplasm by SecB for post-translational secretion across the secretory translocase in the inner membrane. After cleavage of the signal sequence, protein chaperones, such as Skp, DegP and SurA, guide OmpA across the periplasm to the β-barrel assembly machinery (BAM) complex in the outer membrane. During this passage, a disulfide bond is formed between C290 and C302 by DsbA, and the hydrophobicity of segments of the C-terminal domain, which are destined for incorporation as β-barrels in the outer membrane bilayer, is increased by covalent attachment of oligo-(R)-3-hydroxybutyrates. With the aid of the BAM complex, OmpA is then assembled into the outer membrane as a single-domain large pore.

Oligo-(R)-3-hydroxybutyrate modification of sorting signal enables pore formation by Escherichia coli OmpA

The outer membrane protein A (OmpA) of Escherichia coli is a well-known model for protein targeting and protein folding. Wild-type OmpA, isolated either from cytoplasmic inclusion bodies or from outer membranes, forms narrow pores of approximately 80 pS in planar lipid bilayers at room temperature. The pores are well structured with narrow conductance range when OmpA is isolated using lithium dodecyl sulfate (LDS) or RapiGest surfactant but display irregular conductance when OmpA is isolated with urea or guanidine hydrochloride. Previous studies have shown that serine residues S163 and S167 of the sorting signal of OmpA (residues 163-169), i.e., the essential sequence for outer membrane incorporation, are covalently modified by oligomers of (R)-3-hydroxybutyrate (cOHB). Here we find that single-mutants S163 and S167 of OmpA, which still contain cOHB on one serine of the sorting signal, form narrow pores in planar lipid bilayers at room temperature with lower and more irregular conductance than wild-type OmpA, whereas double mutants S163:S167 and S163:V166 of OmpA, with no cOHB on the sorting signal, are unable to form stable pores in planar lipid bilayers. Our results indicate that modification of serines in the sorting signal of OmpA by cOHB in the cytoplasm enables OmpA to incorporate into lipid bilayers at room temperature as a narrow pore. They further suggest that cOHB modification may be an important factor in protein targeting and protein folding.

Sorting signal of Escherichia coli OmpA is modified by oligo-(R)-3-hydroxybutyrate

Escherichia coli outer membrane protein A (OmpA) is a well-established model for the study of membrane assembly. Previous studies have shown that the essential sequence for outer membrane localization, known as the sorting signal, is contained in a segment of the eighth beta-strand, residues 163-171. Sequential digestion of OmpA, purified from outer membranes or inclusion bodies with cyanogen bromide and Staphylococcus aureus GluC, yielded peptides 162-174(LSLGVSYRFGQGE). Western blot and chemical assays indicated that the peptide was covalently modified by oligo-(R)-3-hydroxybutyrate (cOHB), a flexible, amphipathic oligoester. MALDI/MS was consistent with modification of peptides 162-174 by up to ten R-3-hydroxybutyrate (HB) residues. Western blot analysis of mutants of the peptide, using anti-OHB IgG, indicated that cOHB modification was not inhibited by the single mutations S163G, S167G, Y168F, R169N or R169D; however, cOHB was not detected on peptides containing the double mutations S163G:S167G S163G:V166G, L162G:S167G, and L164G:S167G. MALDI/MS/MS of double mutant S163G:S167G confirmed the absence of cOHB-modification. The results suggest that cOHB may be attached to one or both serines, and point to the importance of the flanking hydrophobic residues. Modification by cOHB may play a role in outer membrane targeting and assembly of OmpA.

DnaK promotes the selective export of outer membrane protein precursors in SecA-deficient Escherichia coli

Consistent with many other results indicating that SecA plays an essential role in the translocation of presecretory proteins across the Escherichia coli inner membrane, we previously found that a approximately 95% depletion of SecA completely blocks the export of periplasmic proteins in vivo. Surprisingly, we found that about 25% of the outer membrane protein (OMP) OmpA synthesized after SecA depletion was gradually translocated across the inner membrane. In this study we analyzed the export of several other OMPs after SecA depletion. We found that 25-50% of each OMP as well as an OmpA-alkaline phosphatase fusion protein was exported from SecA-deficient cells. This partial export was completely abolished by the SecA inhibitor sodium azide and therefore still required the participation of SecA. Examination of a variety of OmpA derivatives, however, ruled out the possibility that OMPs are selectively translocated in SecA-deficient cells because SecA binds to their N termini with unusually high affinity. Export after SecA depletion was observed in cells that lack SecB, the primary targeting factor for OMPs, but was abolished by partial inactivation of DnaK. Furthermore, OmpA could be isolated in a stable complex with DnaK. The data strongly suggest that OMPs require only a relatively low level of translocase activity to cross the inner membrane because they can be preserved in a prolonged export-competent state by DnaK.

MotX and MotY, specific components of the sodium-driven flagellar motor, colocalize to the outer membrane in Vibrio alginolyticus

Rotation of the sodium-driven polar flagella of Vibrio alginolyticus requires four motor proteins: PomA, PomB, MotX and MotY. MotX and MotY, which are unique components of the sodium-driven motor of Vibrio, have been believed to be localized in the inner (cytoplasmic) membrane via their N-terminal hydrophobic segments. Here we show that MotX and MotY colocalize to the outer membrane. Both proteins, when expressed together, were detected in the outer membrane fraction separated by sucrose density gradient centrifugation. As mature MotX and MotY proteins do not have N-terminal hydrophobic segments, the N-termini of the primary translation products must have signal sequences that are removed upon translocation across the inner membrane. Moreover, MotX and MotY require each other for efficient localization to the outer membrane. Based on these lines of evidence, we propose that MotX and MotY form a complex in the outer membrane. This is the first case that describes motor proteins function in the outer membrane for flagellar rotation.

Structural and functional roles of the surface-exposed loops of the beta-barrel membrane protein OmpA from Escherichia coli

The N-terminal domain of the OmpA protein from Escherichia coli, consisting of 170 amino acid residues, is embedded in the outer membrane, in the form of an antiparallel beta-barrel whose eight transmembrane beta-strands are connected by three short periplasmic turns and four relatively large surface-exposed hydrophilic loops. This protein domain serves as a paradigm for the study of membrane assembly of integral beta-structured membrane proteins. In order to dissect the structural and functional roles of the surface-exposed loops, they were shortened separately and in all possible combinations. All 16 loop deletion mutants assembled into the outer membrane with high efficiency and adopted the wild-type membrane topology. This systematic approach proves the absence of topogenic signals (e.g., in the form of loop sizes or charge distributions) in these loops. The shortening of surface-exposed loops did not reduce the thermal stability of the protein. However, none of the mutant proteins, with the exception of the variant with the fourth loop shortened, served as a receptor for the OmpA-specific bacteriophage K3. Furthermore, all loops were necessary for the OmpA protein to function in the stabilization of mating aggregates during F conjugation. An OmpA deletion variant with all four loops shortened, consisting of only 135 amino acid residues, constitutes the smallest beta-structured integral membrane protein known to date. These results represent a further step toward the development of artificial outer membrane proteins.

Targeting and assembly of periplasmic and outer-membrane proteins in Escherichia coli

Escherichia coli must actively transport many of its proteins to extracytoplasmic compartments such as the periplasm and outer membrane. To perform this duty, E. coli employs a collection of Sec (secretion) proteins that catalyze the translocation of various polypeptides through the inner membrane. After translocation across the inner membrane, periplasmic and outer-membrane proteins are folded and targeted to their appropriate destinations. Here we review our knowledge of protein translocation across the inner membrane. We also discuss the various signal transduction systems that monitor extracytoplasmic protein folding and targeting, and we consider how these signal transduction systems may ultimately control these processes.

Structure of the outer membrane protein A transmembrane domain

The outer membrane protein A of Escherichia coli (OmpA) is an intensely studied example in the field of membrane protein folding. We have determined the structure of the OmpA transmembrane domain consisting of residues 1-171, by X-ray diffraction analysis, to a resolution of 2.5 A. It consists of a regular, extended eight-stranded beta-barrel and appears to be constructed like an inverse micelle with large water-filled cavities, but does not form a pore. Surprisingly, the cavities seem to be highly conserved during evolution. The structure corroborates the concept that all outer membrane proteins consist of beta-barrels. The structure constitutes a beta-barrel membrane anchor that appears to be the outer membrane equivalent of the single-chain alpha-helix anchor of the inner membrane.

Requirements for the translocation of elongation-arrested, ribosome-associated OmpA across the plasma membrane of Escherichia coli

An oligodeoxynucleotide-dependent method to generate nascent polypeptide chains was adopted for use in a cell-free translation system prepared from Escherichia coli. In this way, NH2-terminal pOmpA fragments of distinct sizes were synthesized. Because most of these pOmpA fragments could be covalently linked to puromycin, precipitated with cetyltrimethylammonium bromide, and were enriched by sedimentation, they represent a population of elongation-arrested, ribosome-associated nascent chains. Translocation of these nascent pOmpA chains into inside-out membrane vesicles of E. coli required SecA and (depending on size) SecB. Whereas their translocation was strictly dependent on the H+-motive force of the vesicles, no indication for the involvement of the bacterial signal recognition particle was obtained. SecA and SecB, although required for translocation, did not mediate binding of the ribosome-associated pOmpA to membrane vesicles. However, SecA and SecB cotranslationally associated with nascent pOmpA, since they could be co-isolated with the ribosome-associated nascent chains and as such catalyzed translocation subsequent to the release of the ribosome. These results indicate that in E. coli, SecA also functionally interacts with preproteins before they are targeted to the translocase of the plasma membrane.

Lethality of the covalent linkage between mislocalized major outer membrane lipoprotein and the peptidoglycan of Escherichia coli

The major outer membrane lipoprotein (Lpp) of Escherichia coli possesses serine at position 2, which is thought to function as the outer membrane sorting signal, and lysine at the C terminus, through which Lpp covalently associates with peptidoglycan. Arginine (R) is present before the C-terminal lysine in the wild-type Lpp (LppSK). By replacing serine (S) at position 2 with aspartate (D), the putative inner membrane sorting signal, and by deleting lysine (K) at the C terminus, Lpp mutants with a different residue at either position 2 (LppDK) or the C terminus (LppSR) or both (LppDR) were constructed. Expression of LppSR and LppDR little affected the growth of E. coli. In contrast, the number of viable cells immediately decreased when LppDK was expressed. Prolonged expression of LppDK inhibited separation of the inner and outer membranes by sucrose density gradient centrifugation, whereas short-term expression did not. Pulse-labeled LppDK and LppDR were localized in the inner membrane, indicating that the amino acid residue at position 2 functions as a sorting signal for the membrane localization of Lpp. LppDK accumulated in the inner membrane covalently associated with the peptidoglycan and thus prevented the separation of the two membranes. Globomycin, an inhibitor of lipoprotein-specific signal peptidase II, was lethal for E. coli only when Lpp possessed the C-terminal lysine. Taken together, these results indicate that the inner membrane accumulation of Lpp per se is not lethal for E. coli. Instead, a covalent linkage between the inner membrane Lpp having the C-terminal lysine and the peptidoglycan is lethal for E. coli, presumably due to the disruption of the cell surface integrity.

Membrane topology and assembly of the outer membrane protein OmpA of Escherichia coli K12

The 325-residue outer membrane protein OmpA of Escherichia coli has been proposed to consist of a membrane-embedded moiety (residues 1 to about 170) and a C-terminal periplasmic region. The former is thought to comprise eight transmembrane segments in the form of antiparallel beta-strands, forming an amphiphilic beta-barrel, connected by exposed turns. Several questions concerning this model were addressed. Thus no experimental evidence had been presented for the turns at the inner leaflet of the membrane and it was not known whether or not the periplasmic part of the polypeptide plays a role in the process of membrane incorporation. Oligonucleotides encoding trypsin cleavage sites were inserted at the predicted turn sites of the ompA gene and it was shown that the encoded proteins indeed become accessible to trypsin at the modified sites. Together with previous results, these data also show that the turns on both sides of the membrane do not possess specifically topogenic information. In two cases one of the two expected tryptic fragments was lost and could be detected at low concentration in only one case. Therefore, bilateral proteolytic digestion of outer membranes can cause loss of beta-strands and does not necessarily produce a reliable picture of protein topology. When ompA genes were constructed coding for proteins ending at residue 228 or 274, the membrane assembly of these proteins was shown to be partially defective with about 20% of the proteins not being assembled. No such defect was observed when, following the introduction of a premature stop codon, a truncated protein was produced ending with residue 171.(ABSTRACT TRUNCATED AT 250 WORDS)

Conformation of Escherichia coli outer membrane protein OmpA produced in Bacillus subtilis: influence of lipopolysaccharide

The conformation of the outer membrane protein OmpA of Escherichia coli produced in Bacillus subtilis and solubilized in Sarkosyl was studied by measuring its ability to bind OmpA-specific phage K3 and to inhibit F-mediated conjugation. The partially purified protein was inactive in both of these assays. Refolding of the protein in the presence of lipopolysaccharide resulted in preparations with full phage-binding and conjugation-inhibiting capacity, indicating the formation of surface-exposed loops of OmpA of native conformation. The finding is of importance for the potential use of outer membrane proteins of Gram-negative bacteria as vaccines.

Incompatibility of outer membrane proteins OmpA and OmpF of Escherichia coli with secretion in Bacillus subtilis: fusions with secretable peptides

The secretion of the outer membrane proteins OmpA and OmpF of Escherichia coli has previously been found to be blocked at an early intracellular step, when these proteins were fused to a bacillar signal sequence and expressed in Bacillus subtilis. We have now fused these proteins to long secretable polypeptides, the amino-terminal portions of alpha-amylase or beta-lactamase. In spite of this, no secretion of the fusion proteins was detected in B. subtilis. With the exception of a small fraction of the beta-lactamase fusion, the proteins were cell-bound with uncleaved signal sequences. Protease accessibility indicated that the fusion proteins were not even partially exposed on the outer surface of the cytoplasmic membrane. Thus there was no change of the location compared to the OmpA or OmpF fused to the signal sequence only. We conclude that, like OmpA and OmpF, the fusion proteins fold into an export-incompatible conformation in B. subtilis before the start of translocation, which we postulate to be a late post-translational event.

Porins and specific channels of bacterial outer membranes

Porins and specific channels both produce water-filled pores that allow the transmembrane diffusion of small solutes, but the latter contain specific ligand-binding sites within the channels. Recent structural studies show that many or most of these proteins exist as beta-barrels with the beta-strands traversing the thickness of the outer membrane. The channels often have diameters in the range of 1 nm, and thus the penetration rates of solutes through porin channels are likely to be affected strongly by what appear to be minor differences in the size, shape, hydrophobicity or charge of the solute molecule. With the specific channels, the presence of binding sites can accelerate very significantly the diffusion of some ligands when they are present at low concentrations. Thus these simple channels can sometimes achieve a surprising degree of real or apparent specificity. Recent data tend to favour the idea that these proteins are first exported into the periplasm, and then inserted into the outer membrane. Although lipopolysaccharides seem to play a significant role in the final assembly of the trimeric porins, the details of the targeting process still remain to be elucidated.

Structural determinants in addition to the amino-terminal sorting sequence influence membrane localization of Escherichia coli lipoproteins

The lipid-modified nine-residue amino-terminal sequence of the mature form of the major outer membrane lipoprotein of Escherichia coli contains information that is responsible for sorting to either the inner or outer membrane. Fusion of this sorting sequence to beta-lactamase is sufficient for localization of the resultant lipo-beta-lactamase to the outer membrane (J. Ghrayeb and M. Inouye, J. Biol. Chem. 259:463-467, 1984). Substitution of the serine adjacent to the amino-terminal lipid-modified cysteine residue of the sorting sequence with the negatively charged residue aspartate causes inner membrane localization (K. Yamaguchi, F. Yu, and M. Inouye, Cell 53:423-432, 1988). Fusion of the aspartate-containing nine-residue inner membrane localization signal to the normally outer membrane lipoprotein bacteriocin release protein does cause partial localization to the inner membrane. However, a single replacement of the glutamine adjacent to the amino-terminal lipid-modified cysteine residue of bacteriocin release protein with aspartate causes no inner membrane localization. Therefore, an aspartate residue itself lacks the information necessary for inner membrane sorting when removed from the structural context provided by the additional eight residues of the sorting sequence. Although the aspartate-containing inner membrane sorting sequence causes an almost quantitative localization to the inner membrane when fused to the otherwise soluble protein beta-lactamase, this sequence cannot prevent significant outer membrane localization when fused to proteins (bacteriocin release protein and OmpA) normally found in the outer membrane. Therefore, structural determinants in addition to the amino-terminal sorting sequence influence the membrane localization of lipoproteins.

Export of altered forms of an Escherichia coli K-12 outer membrane protein (OmpA) can inhibit synthesis of unrelated outer membrane proteins

Expression of mutant ompA genes, encoding the 325 residue Escherichia coli outer membrane protein OmpA, caused an inhibition of synthesis of the structurally unrelated outer membrane porins OmpC and OmpF and of wild-type OmpA, but not of the periplasmic beta-lactamase. There was no accumulation of precursors of the target proteins and the inhibitory mechanism operated at the level of translation. So far only alterations around residue 45 of OmpA have been found to affect this phenomenon. Linkers were inserted between the codons for residues 45 and 46. A correlation between size and sequence of the resulting proteins and presence or absence of the inhibitory effect was not found, indicating that the added residues acted indirectly by altering the conformation of other parts of the mutant OmpA. To be effective, the altered polypeptides had to be channelled into the export pathway. Internal deletions in effector proteins, preventing incorporation into the membrane, abolished effector activity. The results suggest the existence of a periplasmic component that binds to OmpA prior to membrane assembly; impaired release of this factor from mutant OmpA proteins may trigger inhibition of translation. The factor could be a See B-type protein, keeping outer membrane proteins in a form compatible with membrane assembly.

Role of lipopolysaccharide in assembly of Escherichia coli outer membrane proteins OmpA, OmpC, and OmpF

Selection was performed for resistance to a phage, Ox2, specific for the Escherichia coli outer membrane protein OmpA, under conditions which excluded recovery of ompA mutants. All mutants analyzed produced normal quantities of OmpA, which was also normally assembled in the outer membrane. They had become essentially resistant to OmpC and OmpF-specific phages and synthesized these outer membrane porins at much reduced rates. The inhibition of synthesis acted at the level of translation. This was due to the presence of lipopolysaccharides (LPS) with defective core oligosaccharides. Cerulenin blocks fatty acid synthesis and therefore that of LPS. It also inhibits synthesis of OmpC and OmpF but not of OmpA (C. Bocquet-Pagès, C. Lazdunski, and A. Lazdunski, Eur. J. Biochem. 118:105-111, 1981). In the presence of the antibiotic, OmpA synthesis and membrane incorporation remained unaffected at a time when OmpC and OmpF synthesis had almost ceased. The similarity of these results with those obtained with the mutants suggests that normal porin synthesis is not only interfered with by production of mutant LPS but also requires de novo synthesis of LPS. Since synthesis and assembly of OmpA into the outer membrane was not affected in the mutants or in the presence of cerulenin, association of this protein with LPS appears to occur with outer membrane-located LPS.

Export and sorting of the Escherichia coli outer membrane protein OmpA

Results of studies, mostly using the outer membrane, 325 residue protein OmpA, are reviewed which concern its translocation across the plasma membrane and incorporation into the outer membrane of Escherichia coli. For translocation, neither a unique export signal, acting in a positive fashion within the mature part of the precursor, nor a unique conformation of the precursor is required. Rather, the mature part of a secretory protein has to be export-compatible. Export-incompatibility can be caused by a stretch of 16 (but not 8 or 12) hydrophobic residues, too low a size of the polypeptide (smaller than 75 residue precursors), net positive charge at the N-terminus, or lack of a turn potential at the same site. It is not yet clear whether binding sites for chaperonins (SecB, trigger factor, GroEL) within OmpA are important in vivo. The mechanism of sorting of outer membrane proteins is not yet understood. The membrane part of OmpA, encompassing residues 1 to about 170, it thought to traverse the membrane eight times in antiparallel beta-sheet conformation. At least the structure of the last beta-strand (residues 160-170) is of crucial importance for membrane assembly. It must be amphiphilic or hydrophobic, these properties must extend over at least nine residues, and it must not contain a proline residue at or near its center. Membrane incorporation of OmpA involves a conformational change of the protein and it could be that the last beta-strand initiates folding and assembly in the outer membrane.