The pH Dependence of the Individual Steps in the Glucose Oxidase Reaction

Overview on the Development of Electrochemical Immunosensors by the Signal Amplification of Enzyme- or Nanozyme-Based Catalysis Plus Redox Cycling

Enzyme-linked electrochemical immunosensors have attracted considerable attention for the sensitive and selective detection of various targets in clinical diagnosis, food quality control, and environmental analysis. In order to improve the performances of conventional immunoassays, significant efforts have been made to couple enzyme-linked or nanozyme-based catalysis and redox cycling for signal amplification. The current review summarizes the recent advances in the development of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling for signal amplification. The special features of redox cycling reactions and their synergistic functions in signal amplification are discussed. Additionally, the current challenges and future directions of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling are addressed.

Enzyme-functionalized alginate microparticles enable anaerobic culture under ambient oxygen

Methods for culturing oxygen-sensitive cells and organisms under anaerobic conditions are vital to biotechnology research. Here, we report a biomaterial-based platform for anaerobic culture that consists of glucose oxidase (GOX) functionalized alginate microparticles (ALG-GOX), which are designed to deplete dissolved [O2 ] through enzymatic activity. ALG-GOX microparticles were synthesized via a water-in-oil emulsion and had a size of 132.0 ± 51.4 µm. Despite having a low storage modulus, the microparticles remained stable under aqueous conditions due to covalent crosslinking through amide bonds. Enzyme activity was tunable based on the loaded GOX concentration, with a maximum activity of 3.6 ± 0.3 units/mg of microparticles being achieved at an initial loading concentration of 5 mg/mL of GOX in alginate precursor solution. High enzyme activity in ALG-GOX microparticles resulted in rapid oxygen depletion, producing a suitable environment for anaerobic culture. Microparticles loaded with both GOX and catalase (ALG-GOX-CAT) to reduce H2 O2 buildup exhibited sustained activity for potential long-term anaerobic culture. ALG-GOX-CAT microparticles were highly effective for the anaerobic culture of Bacteroides thetaiotaomicron, with 10 mg/mL of ALG-GOX-CAT microparticles supporting the same level of growth in an aerobic environment compared to an anaerobic chamber after 16 h (8.70 ± 0.96 and 10.03 ± 1.03 million CFU, respectively; N.S. p = 0.07). These microparticles could be a valuable tool for research and development in biotechnology.

Building Block Engineering toward Realizing High-Performance Electrochromic Materials and Glucose Biosensing Platform

The molecular engineering of conjugated systems has proven to be an effective method for understanding structure-property relationships toward the advancement of optoelectronic properties and biosensing characteristics. Herein, a series of three thieno[3,4-c]pyrrole-4,6-dione (TPD)-based conjugated monomers, modified with electron-rich selenophene, 3,4-ethylenedioxythiophene (EDOT), or both building blocks (Se-TPD, EDOT-TPD, and EDOT-Se-TPD), were synthesized using Stille cross-coupling and electrochemically polymerized, and their electrochromic properties and applications in a glucose biosensing platform were explored. The influence of structural modification on electrochemical, electronic, optical, and biosensing properties was systematically investigated. The results showed that the cyclic voltammograms of EDOT-containing materials displayed a high charge capacity over a wide range of scan rates representing a quick charge propagation, making them appropriate materials for high-performance supercapacitor devices. UV-Vis studies revealed that EDOT-based materials presented wide-range absorptions, and thus low optical band gaps. These two EDOT-modified materials also exhibited superior optical contrasts and fast switching times, and further displayed multi-color properties in their neutral and fully oxidized states, enabling them to be promising materials for constructing advanced electrochromic devices. In the context of biosensing applications, a selenophene-containing polymer showed markedly lower performance, specifically in signal intensity and stability, which was attributed to the improper localization of biomolecules on the polymer surface. Overall, we demonstrated that relatively small changes in the structure had a significant impact on both optoelectronic and biosensing properties for TPD-based donor-acceptor polymers.

Regulation of different protonated states of two intimate histidine residues on the reductive half-reaction of glucose oxidase

Glucose oxidase (GOx) can catalyze the oxidation of β-D-glucose under mild conditions to directly convert biological energy into electrical energy, which has great potential for applications in the fields of enzyme biofuel cells and glucose biosensors. In enzymatic biofuel cells, GOx is often used as an anodic catalyst to improve the performance. The important role of two intimate histidine residues, His505 and His548 (PDB code 4YNU), in the GOx active center has been highlighted in the catalytic oxidation of β-D-glucose, but there is still a lack of systematic examination on the influence of different protonated states of His505 and His548 on the catalytic oxidation of β-D-glucose in GOx. Therefore, in the present work, the GOx active center under the possible protonated states of His548 and His505 is systematically examined by using ONIOM calculations, as well as the influence of remote Arg210 is considered. The calculations reveal that the intimate His505 and His548 can modulate the interaction of the β-D-glucose substrate with isoalloxazine and then control the deprotonization of the hydroxyl group bound to the anomeric carbon of β-D-glucose like controllers. The remote Arg210 provides the driving force for the transfer of two electrons from β-D-glucose to isoalloxazine of FAD via the long-range electrostatic attraction like a horse. Specially, the protonated His505 can serve as a good helper of Arg210 to promote the occurring of the two-proton-coupled two-electron transfer from β-D-glucose to isoalloxazine and His548 in the active center of GOx. These findings provide much insight into the catalytic reactions of GOx in a low pH environment, which may be beneficial to expand the applications of GOx.

Green rust (GR) and glucose oxidase (GOX) based Fenton-like reaction: Capacity of sustainable release, promoted conversion of glucose through GOX-iron and pH self-adjustment

The Fenton reaction is regarded as highly efficient for the degradation of organic contaminants. However, the traditional Fenton reaction is still flawed in a narrow pH working range and low utilization efficiency of the reagents. Based on two striking features, a sustained release of H₂O₂ in-situ under the catalysis of glucose oxidase (GOX) and the rapid electron donation & transferability from green rust (GR), an adaptable biological Fenton-like system (GGGMFs) was established. The coupling roles of glucose, GOX and GR in the degradation of 3,4-dimethylaniline (3,4-DMA) and the types of reactive species were deduced by electron spin resonance (ESR), etc.. Results demonstrated that the suitable pH range of the system was optimized from acidic to circumneutral, which was favorable for practical application, owing to the heterogeneous formation of GR and the pH self-adjustable capacity of GOX-Glucose. Meanwhile, hydroxyl radical (·OH), superoxide radical (·O₂^-) and Fe (IV) were identified to be the main oxidizing reactive species. Taking different selectivity of the reactive species to certain pollutant functional groups into consideration, the degradation pathways of 3,4-DMA were proposed. Moreover, it was shown that GR not only acted as the activating substance of the Fenton-like reaction, but also enhanced the activity of GOX, resulting in the promotion of glucose conversion in GGGMFs. This study shed light on the enhancement mechanism consisting of two aspects: (i) the elimination of product inhibition (ii) the formation of a 2Fe(III)-FAD complex with FAD, the active center of GOX, which prompted the electronic transfer in the enzyme catalytic reaction.

Glucose Oxidase, an Enzyme “Ferrari”: Its Structure, Function, Production and Properties in the Light of Various Industrial and Biotechnological Applications

Glucose oxidase (GOx) is an important oxidoreductase enzyme with many important roles in biological processes. It is considered an “ideal enzyme” and is often called an oxidase “Ferrari” because of its fast mechanism of action, high stability and specificity. Glucose oxidase catalyzes the oxidation of β-d-glucose to d-glucono-δ-lactone and hydrogen peroxide in the presence of molecular oxygen. d-glucono-δ-lactone is sequentially hydrolyzed by lactonase to d-gluconic acid, and the resulting hydrogen peroxide is hydrolyzed by catalase to oxygen and water. GOx is presently known to be produced only by fungi and insects. The current main industrial producers of glucose oxidase are Aspergillus and Penicillium. An important property of GOx is its antimicrobial effect against various pathogens and its use in many industrial and medical areas. The aim of this review is to summarize the structure, function, production strains and biophysical and biochemical properties of GOx in light of its various industrial, biotechnological and medical applications.

Next step in 2nd generation glucose biosensors: Ferrocene-loaded electrospun nanofibers

Glucose determination is one of the most common analyses in clinical chemistry. Employing biosensors for this purpose has become the method of choice for home use for diabetic patients. To limit the impact of dissolved O₂ concentration or possible interferences (known hindrances in the classical glucose detection approach), a variety of mediated pathways have been explored. Herein, an ingenious, facile and low-cost approach for immobilization of redox mediator within nanofibrous mats is presented. This '2^nd generation' biosensor is able to avoid common issues such as leaching or diffusion barriers whilst providing the necessary close contact between the enzyme and the redox shuttle, for enhancing the detection accuracy and accelerate the response. Polyacrylonitrile nanofibers loaded with carbon nanotubes and ferrocene (PAN/Fc/MWCNT-COOH NFs) have been successfully prepared and applied as biosensing matrices upon cross-linking of glucose oxidase (GOD). The morphology of the NFs was investigated by means of scanning electron microscopy (SEM-EDX) and correlated to the kinetics of mediated electron transfer and to the efficiency in glucose detection, which were evaluated through cyclic voltammetry (CV) and amperometric measurements. The content of Fc was varied from 0.5 to 5.0 wt%, with optimum biosensor performance at 1.0 wt% exhibiting a linear range up to 8.0 × 10^-3 M with sensitivity of ~27.1 mAM^-1 cm^-2 and 4.0 μM LOD. Excellent stability (RSD 2.68%) during 40 consecutive measurements along with insignificant interference and accurate recovery in real sample analysis (~100%) make for a very reliable sensor that can easily render itself to miniaturization and has the potential for a wide range of practical applications.

Structure and function relationships of sugar oxidases and their potential use in biocatalysis

Several sugar oxidases that catalyze the oxidation of sugars have been isolated and characterized. These enzymes can be classified as flavoenzyme due to the presence of flavin adenine dinucleotide (FAD) as a cofactor. Sugar oxidases have been proposed to be the key biocatalyst in biotransformation of carbohydrates which can potentially convert sugars to provide a pool of intermediates for synthesis of rare sugars, fine chemicals and drugs. Moreover, sugar oxidases have been applied in biosensing of various biomolecules in food industries, diagnosis of diseases and environmental pollutant detection. This review provides the discussions on general properties, current mechanistic understanding, structural determination, biocatalytic application, and biosensor integration of representative sugar oxidase enzymes, namely pyranose 2-oxidase (P2O), glucose oxidase (GO), hexose oxidase (HO), and oligosaccharide oxidase. The information regarding the relationship between structure and function of these sugar oxidases points out the key properties of this particular group of enzymes that can be modified by engineering, which had resulted in a remarkable economic importance.

Fabrication and Characterization of Glucose Biosensors by Using Hydrothermally Grown ZnO Nanorods

Highly oriented ZnO nanorod (NR) arrays were fabricated on a seeded substrate through a hydrothermal route. The prepared ZnO nanorods were used as an amperometric enzyme electrode, in which glucose oxidase (GOx) was immobilised through physical adsorption. The modified electrode was designated as Nafion/GOx/ZnO NRs/ITO. The morphology and structural properties of the fabricated ZnO nanorods were analysed using field-emission scanning electron microscope and X-ray diffractometer. The electrochemical properties of the fabricated biosensor were studied by cyclic voltammetry and amperometry. Electrolyte pH, electrolyte temperature and enzyme concentration used for immobilisation were the examined parameters influencing enzyme activity and biosensor performance. The immobilised enzyme electrode showed good GOx retention activity. The amount of electroactive GOx was 7.82 × 10⁻⁸ mol/cm², which was relatively higher than previously reported values. The Nafion/GOx/ZnO NRs/ITO electrode also displayed a linear response to glucose ranging from 0.05 mM to 1 mM, with a sensitivity of 48.75 µA/mM and a low Michaelis–Menten constant of 0.34 mM. Thus, the modified electrode can be used as a highly sensitive third-generation glucose biosensor with high resistance against interfering species, such as ascorbic acid, uric acid and L-cysteine. The applicability of the modified electrode was tested using human blood samples. Results were comparable with those obtained using a standard glucometer, indicating the excellent performance of the modified electrode.

Open-to-Air RAFT Polymerization in Complex Solvents: From Whisky to Fermentation Broth

We investigate the use of in situ enzyme degassing to facilitate the open-to-air reversible addition-fragmentation chain transfer (RAFT) polymerization of hydroxyethyl acrylate (HEA) in a wide range of complex aqueous solvents, including, beer, wine, liquor, and fermentation broth. This enzyme-assisted polymerization procedure is impressively robust, and poly(HEA) was attained with good control over molecular weight and a narrow dispersity in nearly all of the solvents tested. Kinetics experiments on HEA polymerization in whisky and spectroscopic analysis of the purified polymers suggest high end-group fidelity, as does the successful chain extension of a poly(HEA) macro chain transfer agent with narrow dispersity. These results suggest enzyme-assisted RAFT may be a powerful and underutilized tool for high-throughput screening and materials discovery and may simplify the synthesis of well-defined polymers in complex conditions.

Impact of additives on the formation of protein aggregates and viscosity in concentrated protein solutions

In concentrated protein solutions attractive protein interactions may not only cause the formation of undesired aggregates but also of gel-like networks with elevated viscosity. To guarantee stable biopharmaceutical processes and safe formulations, both phenomenons have to be avoided as these may hinder regular processing steps. This work screens the impact of additives on both phase behavior and viscosity of concentrated protein solutions. For this purpose, additives known for stabilizing proteins in solution or modulating the dynamic viscosity were selected. These additives were PEG 300, PEG 1000, glycerol, glycine, NaCl and ArgHCl. Concentrated lysozyme and glucose oxidase solutions at pH 3 and 9 served as model systems. Fourier-transformed-infrared spectroscopy was chosen to determine the conformational stability of selected protein samples. Influencing protein interactions, the impact of additives was strongly dependent on pH. Of all additives investigated, glycine was the only one that maintained protein conformational and colloidal stability while decreasing the dynamic viscosity. Low concentrations of NaCl showed the same effect, but increasing concentrations resulted in visible protein aggregation.

[Wound management with enzyme alginogels : Expert consensus]

BACKGROUND

The challenges of modern wound management, such as the treatment of chronic wounds and their phase-specific handling, are demanding and require optimally adapted therapeutic measures. The principles of moist wound care as well as an adequate debridement have priority here. To support these necessary measures, different options are available, e.g., a new product group operating across several wound phases.

OBJECTIVE

A new treatment principle in modern wound management based on an expert consensus is presented.

METHODS

On the basis of clinical experience reports and published evidence, the current and new principles of wound treatment were discussed in a panel of experts and formulated as a consensus statement.

RESULTS

Enzyme alginogels represent a combination of agents that allow phase-specific wound care. They exhibit autolytic, absorbent, and antimicrobial properties and simultaneously cover three components of wound management based on the TIME framework. Thus, according to the experts, they differ from other wound healing products and can be classified in a distinct product group. Clinical studies, as well as clinical experiences, provide evidence for the efficacy of enzyme alginogels.

DISCUSSION

According to the experts, the potential of enzyme alginogels used considering the principles of moist wound care, comprises the three-fold effect (continuous and significantly simplified debridement, maintaining a moist wound environment and antimicrobial effect without cytotoxicity), the ease of use, and the flexible application. In addition, the flexibility of the product class regarding frequency of application, duration of treatment and combinability with secondary dressings, are of economic benefit in the health care sector.

Engineered Carbon-Nanomaterial-Based Electrochemical Sensors for Biomolecules

The study of electrochemical behavior of bioactive molecules has become one of the most rapidly developing scientific fields. Biotechnology and biomedical engineering fields have a vested interest in constructing more precise and accurate voltammetric/amperometric biosensors. One rapidly growing area of biosensor design involves incorporation of carbon-based nanomaterials in working electrodes, such as one-dimensional carbon nanotubes, two-dimensional graphene, and graphene oxide. In this review article, we give a brief overview describing the voltammetric techniques and how these techniques are applied in biosensing, as well as the details surrounding important biosensing concepts of sensitivity and limits of detection. Building on these important concepts, we show how the sensitivity and limit of detection can be tuned by including carbon-based nanomaterials in the fabrication of biosensors. The sensing of biomolecules including glucose, dopamine, proteins, enzymes, uric acid, DNA, RNA, and H2O2 traditionally employs enzymes in detection; however, these enzymes denature easily, and as such, enzymeless methods are highly desired. Here we draw an important distinction between enzymeless and enzyme-containing carbon-nanomaterial-based biosensors. The review ends with an outlook of future concepts that can be employed in biosensor fabrication, as well as limitations of already proposed materials and how such sensing can be enhanced. As such, this review can act as a roadmap to guide researchers toward concepts that can be employed in the design of next generation biosensors, while also highlighting the current advancements in the field.

A novel bioelectrochemical interface based on in situ synthesis of gold nanostructures on electrode surfaces and surface activation by Meerwein's salt. A bioelectrochemical sensor for glucose determination

A novel effective bioelectrochemical sensor interface for enzyme biosensors is proposed. The method is based on in situ synthesis of gold nanostructures (5-15 nm) on the thin-film electrode surface using the oleylamine (OA) method, which provides a high-density, stable, electrode interface nanoarchitecture. New method to activate the surface of the OA-stabilized nanostructured electrochemical interface for further functionalization with biomolecules (glucose oxidase enzyme) using Meerwein's salt is proposed. Using this approach a new biosensor for glucose determination with improved analytical characteristics: wide working range of 0.06-18.5mM with a sensitivity of 22.6 ± 0.5 μAmM(-1)cm(-2), limit of detection 0.02 mM, high reproducibility, and long lifetime (60 d, 93%) was developed. The surface morphology of the electrodes was characterized by scanning electron microscopy (SEM). The electrochemical properties of the interface were studied by cyclic voltammetry and electrochemical impedance spectroscopy using a Fe(II/III) redox couple. The studies revealed an increase in the electroactive surface area and a decrease in the charge transfer resistance following surface activation with Meerwein's reagent. A remarkably enhanced stability and reproducibility of the sensor was achieved using in situ synthesis of gold nanostructures on the electrode surface, while surface activation with Meerwein's salt proved indispensable in achieving an efficient bioelectrochemical interface.

Development of an amperometric-based glucose biosensor to measure the glucose content of fruit

An amperometric enzyme-electrode was introduced where glucose oxidase (GOD) was immobilized on chitosan membrane via crosslinking, and then fastened on a platinum working electrode. The immobilized enzyme showed relatively high retention activity. The activity of the immobilized enzyme was influenced by its loading, being suppressed when more than 0.6 mg enzyme was used in the immobilization. The biosensor showing the highest response to glucose utilized 0.21 ml/cm² thick chitosan membrane. The optimum experimental conditions for the biosensors in analysing glucose dissolved in 0.1 M phosphate buffer (pH 6.0) were found to be 35°C and 0.6 V applied potential. The introduced biosensor reached a steady-state current at 60 s. The apparent Michaelis-Menten constant (KMapp) of the biosensor was 14.2350 mM, and its detection limit was 0.05 mM at s/n > 3, determined experimentally. The RSD of repeatability and reproducibility of the biosensor were 2.30% and 3.70%, respectively. The biosensor was showed good stability; it retained ~36% of initial activity after two months of investigation. The performance of the biosensors was evaluated by determining the glucose content in fruit homogenates. Their accuracy was compared to that of a commercial glucose assay kit. There was no significance different between two methods, indicating the introduced biosensor is reliable.

Development of a new biosensor for determination of catalase activity

Catalase is one of the major antioxidant enzymes that catalyzes the hydrolysis of H2O2. The aim of this study was to suggest a new method for the assay of catalase activity. For this purpose, an amperometric biosensor based on glucose oxidase for determination of catalase activity was developed. Immobilization of glucose oxidase was made by a cross-linking method with glutaraldehyde on a Clark-type electrode (dissolved oxygen probe). Optimization and characterization properties of the biosensor were studied and determination of catalase activity in defined conditions was investigated in artificial serum solution. The results were compared with a reference method.

Determination of the intrinsic kinetic constants of immobilized glucose oxidase and catalase

Models of membrane systems containing immobilized glucose oxidase and catalase operating together or independently have been developed. A rotated disk electrode apparatus was employed with novel electrochemical operating conditions to experimentally determine mass transfer and intrinsic kinetic parameters of enzyme-containing membranes. The value of a mass transfer parameter that describes internal and external diffusion was first determined under conditions that do not permit the enzyme reactions. In a subsequent experiment with the reaction allowed, kinetic parameters corresponding to the intrinsic maximal velocity and Michaelis constants of the immobilized enzymes were estimated by regression analysis of data based on an appropriate two- or three- parameter model. It was found that immobilization reduced the maximal intrinsic velocity but had no detectable effect on the Michaelis constants. In all but one case- these methods for membrane characterization are nondestructive and can be used repeatedly on a given membrane. These techniques provide the means for quantitative comparisons of immobilization methods and make possible temporal studies of immobilized enzyme inactivation.

Energy-converting respiratory Complex I: on the way to the molecular mechanism of the proton pump

In respiring organisms the major energy transduction flux employs the transmembrane electrochemical proton gradient as a physical link between exergonic redox reactions and endergonic ADP phosphorylation. Establishing the gradient involves electrogenic, transmembrane H(+) translocation by the membrane-embedded respiratory complexes. Among others, Complex I (NADH:ubiquinone oxidoreductase) is the most structurally complex and functionally enigmatic respiratory enzyme; its molecular mechanism is as yet unknown. Here we highlight recent progress and discuss the catalytic events during Complex I turnover in relation to their role in energy conversion and to the enzyme structure.

Glucose biosensor based on three dimensional ordered macroporous self-doped polyaniline/Prussian blue bicomponent film

In this paper, a three dimensional ordered macroporous self-doped polyaniline/Prussian blue (3DOM SPAN/PB) bicomponent film was fabricated via the inverted crystal template technique using step-by-step electrodeposition. In this bicomponent film, PB not only acted as a redox mediator, but also presented increased stability in neutral or weak alkaline solution by the protection of SPAN layer on the top. A novel glucose biosensor was fabricated based on the large active surface area and excellent conductivity possessed by the 3DOM SPAN/PB film. The applying experimental conditions of the glucose biosensor have been optimized. Under the optimal conditions, the biosensor showed a wide linear range over three orders of magnitude in glucose concentrations (from 2 to 1600 μM) and a low detection limit of 0.4 μM. Moreover, the biosensor exhibited short response time, high selectivity and excellent operation stability, which can be applied to detect the blood sugar in real samples without any pretreatment.

β-galactosidase determination by an electrochemical biosensor mediated with ferrocene

Abstract: In this paper, a new viewpoint on the activity determination of β-galactosidase is reported. Glucose oxidase was directly immobilized on a glassy carbon electrode and mediated by ferrocene. The biosensor's performance was based on mediated electron transfer by ferrocene, which reduced via glucose oxidase reaction. In this reaction, substrate of glucose oxidase, glucose was provided by the activity of β-galactosidase in the sample. The parameters of the fabrication process for the electrode were optimized. Experimental conditions influencing the biosensor performance, such as pH, ferrocene and lactose concentrations, and temperature, were investigated and assessed. Finally, the biosensor was successfully applied to determination of β-galactosidase activity of artificial intestinal juice.

Biocatalytic nylon nanofibrous membranes

Nylon-6 nanofibrous membranes (NFM) have been prepared, characterized and used to build-up electrochemical biosensing devices. The assembly and the functioning of biocatalytic NFM are described in connection with the physical and the covalent immobilization of glucose oxidase for the detection of glucose. Effects of the enzyme loading, the mediator, the pH, the surface acidity and the kinetic of the catalysis have been thoroughly investigated. The results show that NFM allow the binding of proteins without the need for the hydrolysis step, in contrast to the nylon film. Furthermore, the high surface-to-volume ratio of the NFM allow superior loading of the enzyme with respect to thin film technology. The immobilization step does not affect the permeability of the coating to the mediator used. These results give evidence that NFM are a promising and inexpensive coating for a novel electrochemical transducer.